www.DataSheet4U.

com

UTC TDA2822M LINEAR INTEGRATED CIRCUIT

DUAL LOW VOLTAGE POWER
AMPLIFIER
DESCRIPTION
The UTC TDA2822M is a monolithic integrated audio
amplifier in a 8-Pin plastic dual in line package. It is designed
for portable cassette players and radios. SOP-8

FEATURES
*Wide operating supply voltage:Vcc=1.8V- 12V.
*Low crossover distortion.
*Low quiescent circuit current.
*Bridge/stereo configuration. DIP-8

PIN CONFIGURATIONS

OUTPUT 1 1 8 NF 1

Vcc 2 7 INPUT 1

OUTPUT 2 3 6 INPUT 2

GND 4 5 NF 2

BLOCK DIAGRAM

VCC
2

INPUT1 7
1 OUTPUT1
NP1 8

INPUT2 6
3 OUTPUT2
NP2 5

4
GND

UTC UNISONIC TECHNOLOGIES CO., LTD. 1

QW-R107-014,C
UTC TDA2822M LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER SYMBOL VALUE UNIT
Supply Voltage VCC 15 V
Output Peak Current IO(peak) 1 A
Power Dissipation PD DIP at Tamb=50°C 1.0 W
SOP at Tamb=50°C 0.5
Operating Temperature Topr -20 ~ +70 °C
Storage Temperature Tstg -40 ~ +150 °C

ELECTRICAL CHARACTERISTICS (Ta=25°C, VCC=6V, f=1kHz, unless otherwise specified)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Operating Supply Voltage VCC 1.8 12 V
Quiescent Circuit Current ICC Vi=0 9 mA
Closed Loop Voltage Gain AV Stereo 40 dB
Closed Loop Voltage Gain AV Bridge 40 dB
Channel Balance CB Stereo -1 0 1 dB
Output Power PO Stereo,VCC=6V,RL=4Ω, 0.4(DIP) 0.65(DIP) W
THD=10% 0.28(SOP) 0.45(SOP)
Output Power PO Stereo,VCC=3V,RL=4Ω, 0.11(DIP) W
THD=10% 0.07(SOP)
Output Power PO Bridge,VCC=6V,RL=4Ω, 0.9(DIP) 1.35(DIP) W
THD=10% 0.63(SOP) 0.94(SOP)
Output Power PO Bridge,VCC=6V,RL=4Ω, 0.35(DIP) W
THD=10% 0.24(SOP)
Total Harmonic Distortion THD Stereo,RL=8Ω, Po=0.2W 0.5 %
Total Harmonic Distortion THD Bridge,RL=8Ω, Po=0.5W 0.5 %
Ripple Rejection RR Stereo,f=100Hz,C3=100µF 24 30 dB
Output Noise Voltage VNO Stereo,BW(-3dB)=20Hz 0.5 2.0 mV
~20kHz
Cross Talk CT Stereo,f=1kHz 50 dB
Input Resistance Ri 100 kΩ

TEST CIRCUIT 1:STEREO TEST CIRCUIT 2:BRIDGE

VCC VCC
C3 C5
100 µF 100 µF

2 2

7 C4 7
INPUT1 470 µF INPUT1
1 1

R1
8 C6 R1 C2
10kΩ 0.1 µF 10kΩ 0.1 µF
C1 RL 8 RL
100 µF R3 R2
4.7Ω 4.7Ω
C1
10 µF

6 C5
6
INPUT2 470 µF
3 3
5
R2 C7
C3
10kΩ 0.1 µF
RL 0.1 µF
C2 5
100 µF R4
R3
4 4.7Ω
4.7Ω
4 C4 0.01 µF

UTC UNISONIC TECHNOLOGIES CO., LTD. 2

QW-R107-014,C
UTC TDA2822M LINEAR INTEGRATED CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
QUIESCENT CURRENT (mA)

RIPPLE REJECTION (dB)

8

6
10
C1=C2
=22 µF
4 20

C1=C2
30 =100 µF
2

40

0 4 8 12 16 10 30 100 300 1000 3000

SUPPLY VOLTAGE (V) FREQUENCY (Hz)

SCHEMATIC DIAGRAM

2
Vcc
I source

CONTROL

Vcc Vcc
1 3
OUT 1 OUT 2

8 7 6 5 4

NF 1 INPUT 1 INPUT 2 NF 2 GND

UTC UNISONIC TECHNOLOGIES CO., LTD. 3

QW-R107-014,C
UTC TDA2822M LINEAR INTEGRATED CIRCUIT

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.

UTC UNISONIC TECHNOLOGIES CO., LTD. 4

QW-R107-014,C