PX 3004
PX 3004
PX 3004
4
4 CHANNEL
POWER AMPLIFIER
SERVICE MANUAL
CONTENTS
Specifications………………………….…………………..……1
Features…………………………………………………………2
Test Conditions And Notes……………………………………2
Controls/connections…………………………………..………3
Mounting…………………………………………….…..………3
Applications………………………………………..……………4
Typical System Configuration…………………………………5
Troubleshooting……………………………………….……..…6
PCB drawings……………………………………..……………7
Parts List………………………………………………..………9
Block Diagrams……………………………………….………12
Semiconductor Pinouts………………………………………13
Exploded view…………………………………………………16
Schematics……………………………………………….……17
Packing…………………………………………………………26
SPECIFICATIONS
External Dimensions
Length 12 ¼” (312mm)
Width 17” (432mm)
Depth 2 9/16” (66mm)
JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into existing
models without notice as a routine expression of our design philosophy. For this reason, Power Series Multichannel Automotive
Amplifiers may differ in some respects from their published specifications and descriptions, but will always equal or exceed the original
specifications unless otherwise stated.
APPLICATIONS – Px300.4
The JBL Px300.4 amplifier can be set
up for stereo or tri-mode operation, as
shown in Figures 6 and 7.
R L
BRIDGED
STEREO R L
NEON
full-range speakers.
Px300.4 POWER FUSES SPEAKER OUTPUTS SPEAKER OUTPUTS
NOTE: To limit bass sent to
full-range speakers, set
X-OVER MODE to HP. See Px300.4
(rear panel) RF Speaker LR Speaker
page 6 to set FREQ and SLOPE.
+ +
ST MO FLAT HP LP + +
INPUT MODE
MODE - -
FLAT HP LP FLAT HP LP
MODE MODE
TROUBLESHOOTING
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8