Mechanical Anchors

R-LX-CS-ZP Zinc Plated Countersunk Concrete Screw Anchor

Self-tapping concrete screwbolt

Approvals and Reports

• ETA 17/0806
• UKTA-22//6199

Product information

Features and benefits Applications Base materials

• Time-efficient installation through streamli­ • Through-fixing Approved for use in:
ned procedure - simply drill and drive • Temporary anchorages
• Cracked concrete
• Completely removable with possibility of • Formwork support systems C20/25-C50/60
reuse • Balustrading & handrails • Non-cracked concrete
• Unique design with patented threadform en­ • Fencing & gates manufactu­ C20/25-C50/60
sures high performance for relatively small ring and installation • Reinforced concrete
hole diameter • Racking systems • Unreinforced concrete
• Non-expansion functioning ensures low risk • Public seating
of damage to base material and makes R-LX • Scaffolding
ideal for installation near edges and adja­
cent anchors
• High performance in non-cracked concrete
• Different head types for any application
• Oversize head for fixtures with elongated
holes
• Excellent product for temporary fixing
• Suitable for standard and reduced embed­
ment depth
• Concrete screws can be used in
earthquake-prone zones - seismic category
C1 and C2

Installation guide

1. Drill the hole with rotary hammer drilling machine. Drill to a required depth.
2. Blow out dust at least 4 times with a hand pump.
3. Possibility of unscrewing and re-screwing.
4. Tighten to the recommended torque.
5. After installation.

www.rawlplug.com 1
Mechanical Anchors

Product information

Anchor Fixture

Diameter Length Max. thickness tfix for: Hole diameter

Size Product Code
d L hnom,red hnom,std df

[mm] [mm] [mm] [mm] [mm]

R-LX-08X060-CS-ZP 9.9 60 10 - 12

R-LX-08X075-CS-ZP 9.9 75 25 5 12

R-LX-08X090-CS-ZP 9.9 90 40 20 12

8 R-LX-08X100-CS-ZP 9.9 100 50 30 12

R-LX-08X120-CS-ZP 9.9 120 70 50 12

R-LX-08X130-CS-ZP 9.9 130 80 60 12

R-LX-08X150-CS-ZP 9.9 150 100 80 12

R-LX-10X060-CS-ZP 12.4 60 5 - 14

R-LX-10X065-CS-ZP 12.4 65 10 - 14

R-LX-10X075-CS-ZP 12.4 75 20 - 14

R-LX-10X085-CS-ZP 12.4 85 30 - 14

R-LX-10X090-CS-ZP 12.4 90 35 5 14

R-LX-10X100-CS-ZP 12.4 100 45 15 14

10
R-LX-10X110-CS-ZP 12.4 110 55 25 14

R-LX-10X120-CS-ZP 12.4 120 65 35 14

R-LX-10X130-CS-ZP 12.4 130 75 45 14

R-LX-10X140-CS-ZP 12.4 140 85 55 14

R-LX-10X150-CS-ZP 12.4 150 95 65 14

R-LX-10X160-CS-ZP 12.4 160 105 75 14

Installation data

90º

Size 8 10

Thread diameter d [mm] 9.9 12.4

Hole diameter in substrate d0 [mm] 8 10

Screw drive - [-] T50 T50

Head diameter [mm] 21.3 21.3

Max. torque for impact screw driver T imp,max [Nm] 900 950

www.rawlplug.com 2
Mechanical Anchors

Installation data
Size 8 10

STANDARD EMBEDMENT DEPTH

Min. hole depth in substrate h0,s [mm] 80 95

Real hole depth in substrate h0 [mm] L + 10 - t fix L + 10 - t fix

Min. installation depth hnom,s [mm] 70 85

Min. substrate thickness hmin,s [mm] 110 130

Min. spacing s min, s [mm] 50 60

Min. edge distance c min, s [mm] 50 60

REDUCED EMBEDMENT DEPTH

Min. hole depth in substrate h0,r [mm] 60 65

Real hole depth in substrate h0 [mm] L + 10 - t fix L + 10 - t fix

Min. installation depth hnom,r [mm] 50 55

Min. substrate thickness hmin,r [mm] 100 100

Min. spacing s min,r [mm] 50 60

Min. edge distance c min,r [mm] 50 60

Mechanical properties
Size 8 10

Nominal ultimate tensile strength - tension f uk [N/mm ] 2

1200 1050

Nominal yield strength - tension f yk [N/mm 2] 1050 950

Cross sectional area - tension As [mm 2] 50.3 78.5

Elastic section modulus Wel [mm 3] 50.3 98.1

Characteristic bending resistance M0Rk,s [Nm] 72.4 123.6

Design bending resistance M [Nm] 48.3 82.4

Basic performance data

Performance data for single anchor without influence of edge distance and spacing

Size 8 10

NON-CRACKED CONCRETE C20/25

Standard embedment depth hnom [mm] 70.00 85.00

Reduced embedment depth hnom [mm] 50.00 55.00

CRACKED CONCRETE C20/25

Standard embedment depth hnom [mm] 70.00 85.00

Reduced embedment depth hnom [mm] 50.00 55.00

MEAN ULTIMATE LOAD

TENSION LOAD NRu,m

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 26.04 35.37

Reduced embedment depth [kN] 14.58 17.08

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 16.10 24.89

Reduced embedment depth [kN] 10.10 10.70

SHEAR LOAD VRu,m

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 26.04 51.91

Reduced embedment depth [kN] 14.58 17.08

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 18.33 49.78

Reduced embedment depth [kN] 10.26 12.02

www.rawlplug.com 3
Mechanical Anchors

Basic performance data

Size 8 10

CHARACTERISTIC LOAD

TENSION LOAD NRk

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 18.98 25.78

Reduced embedment depth [kN] 10.63 12.45

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 13.00 18.05

Reduced embedment depth [kN] 7.00 8.00

SHEAR LOAD VRk

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 18.98 41.20

Reduced embedment depth [kN] 10.63 12.45

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 13.29 36.09

Reduced embedment depth [kN] 7.44 8.71

DESIGN LOAD

TENSION LOAD NRd

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 12.65 17.19

Reduced embedment depth [kN] 7.08 8.30

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 8.67 12.03

Reduced embedment depth [kN] 4.67 5.33

SHEAR LOAD VRd

NON-CRACKED CONCRETE C20/25

Standard embedment depth [kN] 12.65 27.47

Reduced embedment depth [kN] 7.08 8.30

CRACKED CONCRETE C20/25

Standard embedment depth [kN] 8.86 24.06

Reduced embedment depth [kN] 4.96 5.81

www.rawlplug.com 4
Mechanical Anchors

Design performance data

(-) failure is not decisive

Size 8 10

Min. installation depth hnom [mm] 50.00 70.00 55.00 85.00

Effective embedment depth hef [mm] 36.00 53.00 40.00 65.00

TENSION LOAD

STEEL FAILURE

Characteristic resistance NRk,s [kN] 60.40 60.40 82.40 82.40

Partial safety factor γ Ms - 1.40 1.40 1.40 1.40

PULL-OUT FAILURE; NON-CRACKED CONCRETE C20/25

Characteristic resistance NRk,p [kN] - - - -

PULL-OUT FAILURE; CRACKED CONCRETE C20/25

Characteristic resistance NRk,p [kN] 7.00 13.00 8.00 -

PULL-OUT FAILURE

Installation safety factor γ inst - 1.00 1.00 1.00 1.00

Increasing factors for NRd,p - C30/37 Ψc - 1.08 1.08 1.08 1.08

Increasing factors for NRd,p - C40/50 Ψc - 1.15 1.15 1.15 1.15

Increasing factors for NRd,p - C50/60 Ψc - 1.19 1.19 1.19 1.19

CONCRETE CONE FAILURE

Installation safety factor γ inst - 1.00 1.00 1.00 1.00

Factor for cracked concrete k cr,N - 7.70 7.70 7.70 7.70

Factor for non-cracked concrete k ucr,N - 11.00 11.00 11.00 11.00

Spacing s cr,N [mm] 112.0 160.0 120.0 196.0

Edge distance c cr,N [mm] 56.00 80.00 60.00 98.00

CONCRETE SPLITTING FAILURE

Installation safety factor γ inst - 1.00 1.00 1.00 1.00

Spacing s cr,sp [mm] 112.0 160.0 136.0 222.0

Edge distance c cr,sp [mm] 56.00 80.00 68.00 111.0

SHEAR LOAD

STEEL FAILURE

Characteristic resistance without lever arm V Rk,s [kN] 30.20 30.20 41.20 41.20

Ductility factor k7 - 0.80 0.80 0.80 0.80

Characteristic resistance with lever arm MRk,s [Nm] 72.40 72.40 123.6 123.6

Partial safety factor γ Ms - 1.50 1.50 1.50 1.50

CONCRETE PRY-OUT FAILURE

Factor k - 1.00 1.00 1.00 2.00

Installation safety factor γ inst - 1.00 1.00 1.00 1.00

CONCRETE EDGE FAILURE

Effective length of anchor ℓf [mm] 50.00 70.00 55.00 85.00

Anchor diameter dnom [mm] 8.00 8.00 10.00 10.00

Installation safety factor γ inst - 1.00 1.00 1.00 1.00

www.rawlplug.com 5
Mechanical Anchors

Design performance data

Characteristic Resistance under fire exposure in concrete C20/25 to C50/60

Size 8 10

R (for EI) = 30 min

Effective embedment depth hef [mm] 36.00 53.00 40.00 65.00

TENSION LOAD

STEEL FAILURE

Characteristic resistance NRk,s [kN] 0.75 0.75 1.57 1.57

PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 1.88 3.25 2.00 4.75

SHEAR LOAD

STEEL FAILURE

Characteristic resistance without lever arm V Rk,s [kN] 0.75 0.75 1.57 1.57

Characteristic resistance with lever arm MRk,s [Nm] 0.90 0.90 2.36 2.36

R (for EI) = 60 min

Effective embedment depth hef [mm] 36.00 53.00 40.00 65.00

TENSION LOAD

STEEL FAILURE

Characteristic resistance NRk,s [kN] 0.65 0.65 1.18 1.18

PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 1.88 3.25 2.00 4.75

SHEAR LOAD

STEEL FAILURE

Characteristic resistance without lever arm V Rk,s [kN] 0.65 0.65 1.18 1.18

Characteristic resistance with lever arm MRk,s [Nm] 0.78 0.78 1.77 1.77

R (for EI) = 90 min

Effective embedment depth hef [mm] 36.00 53.00 40.00 65.00

TENSION LOAD

STEEL FAILURE

Characteristic resistance NRk,s [kN] 0.50 0.50 1.02 1.02

PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 1.88 3.25 2.00 4.75

SHEAR LOAD

STEEL FAILURE

Characteristic resistance without lever arm V Rk,s [kN] 0.50 0.50 1.02 1.02

Characteristic resistance with lever arm MRk,s [Nm] 0.60 0.60 1.53 1.53

R (for EI) = 120 min

Effective embedment depth hef [mm] 36.00 53.00 40.00 65.00

TENSION LOAD

STEEL FAILURE

Characteristic resistance NRk,s [kN] 0.40 0.40 0.79 0.79

PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 1.50 2.60 1.60 3.80

SHEAR LOAD

STEEL FAILURE

Characteristic resistance without lever arm V Rk,s [kN] 0.40 0.40 0.79 0.79

Characteristic resistance with lever arm MRk,s [Nm] 0.48 0.48 1.18 1.18

www.rawlplug.com 6
Mechanical Anchors

Design performance data

Allowable values for resistance in case of Seismic performance category C1

Size 8 10

Effective embedment depth hef [mm] 53.00 65.00

TENSION LOAD, STEEL FAILURE

Characteristic resistance NRk,s [kN] 60.40 82.40

Partial safety factor γ MsN,seisC1 - 1.40 1.40

TENSION LOAD, PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 5.40 13.50

Installation safety factor γ inst - 1.00 1.00

SHEAR LOAD, STEEL FAILURE

Characteristic resistance without lever

V Rk,s [kN] 15.10 27.40
arm

Partial safety factor γ MsV,seisC1 - 1.50 1.50

Allowable values for resistance in case of Seismic performance category C2

Size 8 10

Effective embedment depth hef [mm] 53.00 65.00

TENSION LOAD, STEEL FAILURE

Characteristic resistance NRk,s [kN] 60.40 82.40

Partial safety factor γ MsN,seisC2 - 1.40 1.40

TENSION LOAD, PULL-OUT FAILURE

Characteristic resistance NRk,p [kN] 1.57 4.91

Installation safety factor γ inst - 1.00 1.00

SHEAR LOAD, STEEL FAILURE

Characteristic resistance without lever

V Rk,s [kN] 9.90 20.60
arm

Partial safety factor γ MsV,seisC2 - 1.50 1.50

Product commercial data

Anchor Quantity [pcs] Weight [kg]
Product Code Bar Codes
Length [mm] Box Outer Pallet Box Outer Pallet

R-LX-08X060-CS-ZP
1) 60 100 100 25600 2.7 2.7 728.9 5906675129327

R-LX-08X075-CS-ZP
1) 75 100 100 25600 3.2 3.2 849.2 5906675129334

R-LX-08X090-CS-ZP
1) 90 100 100 19200 3.8 3.8 757.7 5906675129341

R-LX-08X100-CS-ZP
1) 100 100 100 19200 4.2 4.2 830.6 5906675129358

R-LX-08X120-CS-ZP
1) 120 50 50 12800 2.5 2.5 662.3 5906675442471

R-LX-08X130-CS-ZP
1) 130 50 50 12800 2.7 2.7 712.2 5906675129365

R-LX-08X150-CS-ZP
1) 150 50 50 12800 3.1 3.1 812.1 5906675129372

R-LX-10X060-CS-ZP
1) 60 50 50 14400 2.1 2.1 647.5 5906675442426

R-LX-10X065-CS-ZP
1) 65 50 50 14400 2.2 2.2 672.2 5906675129389

R-LX-10X075-CS-ZP
1) 75 50 50 12800 2.6 2.6 690.2 5906675129396

R-LX-10X085-CS-ZP
1) 85 50 50 12800 2.8 2.8 757.0 5906675129402

R-LX-10X090-CS-ZP
1) 90 50 50 12800 3.1 3.1 813.1 5906675442433

R-LX-10X100-CS-ZP
1) 100 50 50 12800 3.4 3.4 892.5 5906675129419

R-LX-10X110-CS-ZP
1) 110 50 50 12800 3.6 3.6 947.8 5906675442440

www.rawlplug.com 7
Mechanical Anchors

Product commercial data

Anchor Quantity [pcs] Weight [kg]
Product Code Bar Codes
Length [mm] Box Outer Pallet Box Outer Pallet

R-LX-10X120-CS-ZP
1) 120 25 25 6400 2.0 2.0 551.2 5906675129426

R-LX-10X130-CS-ZP
1) 130 25 25 9600 2.1 2.1 842.2 5906675442457

R-LX-10X140-CS-ZP
1) 140 25 25 9600 2.3 2.3 896.9 5906675129433

R-LX-10X150-CS-ZP
1) 150 20 20 7680 2.0 2.0 778.0 5906675442464

R-LX-10X160-CS-ZP
1) 160 20 20 7680 2.1 2.1 838.7 5906675129440

1) ETA 17/0806

www.rawlplug.com 8