Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Makaut Question

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Model Question Paper

Marks -5
Unit 1
1. Describe the different types of errors occur in measurement?

2. Explain the role of shunt resistor connected across PMMC.


What are the advantages of moving iron type instrument?

3. A Galvanometer of internal resistance 100 Ohm has a full scale deflection


current of 1mA. To convert it into a voltmeter of range 0-10V, how much
resistance should connect?
4. How the range of DC ammeter and DC voltmeter can be extended? Derive
the expression to find the shunt resistance and multiplier resistance.
5. Derive the expression for deflecting torque of PMMC type instruments?
6. Explain the operation of DC potentiometer

Unit 2
1) Sketch the block diagram of spectrum analyzer and explain it.
2) What is distortion factor? How can this factor be measured?
3) Draw the block diagram of AF wave analyzer with proper explanation.
4) State the applications of spectrum analyzer. What is the function of
integrator in function generator?
5) What is the difference between wave analyzer and harmonic distortion
analyzer?
Unit 3
1) Calculate the vertical to horizontal frequency ratio for Lissajous Figure as
shown below
2) Compare DSO and CRO
3) How do we measure phase and frequency of AC quantity with the help
of CRO?
4) What is Lissajous Figure? How can the phase difference of two sinusoidal
signals be measured using CRO?
5) Compare dual beam and dual trace CRO
Unit 4
1. What are the difference between active and passive transducers?
2. How displacement is measured using LVDT?
3. What are the features of piezo electric transducer? What are the
limitations of strain gauge?
4. Explain the way in which thermocouple works.
5. Write the names of 5 temperature measuring devices. Difference
between seebeck and Peltier effect.
Unit 5
1) What is Data Acquisition System? What do you mean by signal
conditioning in Data Acquisition System?
2) What are the importance of signal converters in Data Acquisition
System?
3) Deduce the expression to measure unknown resistance in Wheatstone
Bridge.
4) A Wheatstone Bridge has 4 resistances 200 Ohm, 20 Ohm, 400 Ohm and
40 Ohm. If the bridge is connected to a 1.5 V battery, then calculate the
current through individual resistors.
5) What is the advantages of Maxwell Bridge? The resistance R=10 Ohm,
inductance L=2mH and capacitance C=5 microfarad are connected with a
AC source of frequency 50 Hz. Then what will be the impedance of circuit
at resonance?

You might also like