Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    Mi - Ya039 Yzf R6

    Uploaded by

    Tiyok Hidrolik
    This document provides instructions for installing an Öhlins shock absorber on a Yamaha R6 motorcycle. It warns to have an Öhlins dealer perform the installation and read the vehicle service manual. The steps include: 1) placing the motorcycle on a stand, 2) removing parts to access the shock, 3) removing the original shock, 4) installing the Öhlins shock in the same way as the original, and 5) reinstalling removed parts and warning to check for proper movement and torque.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mi - Ya039 Yzf R6

    Uploaded by

    Tiyok Hidrolik
    26 views2 pages
    This document provides instructions for installing an Öhlins shock absorber on a Yamaha R6 motorcycle. It warns to have an Öhlins dealer perform the installation and read the vehicle service manual. The steps include: 1) placing the motorcycle on a stand, 2) removing parts to access the shock, 3) removing the original shock, 4) installing the Öhlins shock in the same way as the original, and 5) reinstalling removed parts and warning to check for proper movement and torque.

    Original Title

    MI_YA039 YZF R6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for installing an Öhlins shock absorber on a Yamaha R6 motorcycle. It warns to have an Öhlins dealer perform the installation and read the vehicle service manual. The steps include: 1) placing the motorcycle on a stand, 2) removing parts to access the shock, 3) removing the original shock, 4) installing the Öhlins shock in the same way as the original, and 5) reinstalling removed parts and warning to check for proper movement and torque.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views2 pages

    Mi - Ya039 Yzf R6

    Uploaded by

    Tiyok Hidrolik
    This document provides instructions for installing an Öhlins shock absorber on a Yamaha R6 motorcycle. It warns to have an Öhlins dealer perform the installation and read the vehicle service manual. The steps include: 1) placing the motorcycle on a stand, 2) removing parts to access the shock, 3) removing the original shock, 4) installing the Öhlins shock in the same way as the original, and 5) reinstalling removed parts and warning to check for proper movement and torque.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Adjustments Compression and Rebound Adjuster

    Warning!
    Before riding, always make sure that the +
    -

    basic settings made by Öhlins are according


    to recommended Set-up Data. Read about
    adjustments and setting up in the Öhlins Use a 3mm Allen key
    Owner’s Manual before you make any to adjust.
    adjustments. Contact an Öhlins dealer if you
    have any questions about setting up the shock
    Compression
    absorber.
    Damping
    Before installing this product, check the
    Spring Preload Adjuster contents of the kit. If anything is missing, please
    Rebound contact an Öhlins dealer.
    Damping
    Kit Contents
    Part No. Pcs.
    Shock absorber YA 039 1
    Öhlins Sticker 00192-01 2
    Memo Notes Sticker 01180-01 1
    Owner’s Manual 07242-01 1
    Turn the hexagon screw on the hydraulic Length Adjuster
    adjuster. Turn clockwise to increase, turn
    Please note that during storage and
    counter clockwise to decrease.
    ! transportation, especially at high ambient
    temperature, some of the oil and grease used for
    assembling may leak and stain the packaging.

    Set-up Data This is in no way detrimental to the product,


    wipe off the excessive oil/grease with a cloth.
    Recommended set-up Shock absorber length 293 +5
    -1 mm Warning!
    Rebound 10 clicks Stroke 60 mm Before installing this product, read the Öhlins
    Compression 10 clicks Spring 21041-29 Owner’s Manual. The shock absorber is an
    Spring Preload 14 mm (90 N/mm) important part of your vehicle and will affect the
    Free spring length 150 -30 mm stability.

    Öhlins products are subject to To find the latest information contact Shock Absorber for Yamaha R6

    YA 039
    continuous improvement and your Öhlins distributor. Please
    development, therefore, although consult your Öhlins dealer if you
    these instructions include the most have any questions regarding the
    up-to-date information available at contents in this document.
    the time of printing, minor updates
    Part no. YA_039_0
    may occur.
    Issued 2011-11-21 Mounting Instructions
    © Öhlins Racing AB. All rights Öhlins Racing AB
    reserved. Any reprinting or Box 722
    unauthorized use without the written S-194 27 Upplands Väsby, Sweden
    permission of Öhlins Racing AB Phone +46 8 590 025 00
    is prohibited. fax +46 8 590 025 80
    www.ohlins.com
    How to install How to install
    Warning! 5 Note!
    It is advisable to have an Öhlins dealer install the Remove the screw holding the pull rods to the Lower the motorcycle so that the shock
    shock absorber. swing arm. Remove the lower shock absorber 4 absorber is sligthly compressed, before
    3
    attachment. tightening the screws.
    When installing, read the Vehicle Service Manual.
    6 9
    1 Remove the upper attachment of the original 7 Reinstall the tank, side cover and seat. Install
    Put the motorcycle on a workstand so that shock absorber. Remove the original shock all removed parts in the same way as they
    the rear wheel barely touches the ground. absorber. were before the installation of the Öhlins
    shock absorber.
    Warning! Note!
    Make sure the vehicle is securely supported so Recommendation! Before installing the Öhlins Warning!
    that it will not tip. shock absorber: Make sure that all screws are tightened to the
    2 • Clean the vehicle thoroughly correct torque and that nothing fouls or restricts
    Remove the seat and the tank side panel. • Adjust the length of the shock absorber (check movement of the shock absorber when the
    the headlight angle after adjusting the length!) suspension is fully compressed or extended.
    3
    7
    Remove the screws, one in the front and one
    on each side, on the tank. Remove the original spacer located beteen 5
    the upper shock attachment and the frame.
    4
    8
    Fold up the tank and loosen the upper
    attachment nut of the original shock absorber. Install the Öhlins shock absorber in the same
    way as the original unit. Use the original
    screws.

    1 2

    You might also like