Non-Z170 DDR4 4DIMM Condensed Memory QVL Report161222
Non-Z170 DDR4 4DIMM Condensed Memory QVL Report161222
Non-Z170 DDR4 4DIMM Condensed Memory QVL Report161222
4 DIMM Slots
• 1 DIMM: Supports one module inserted in any slot as Single-channel memory configuration
• 2 DIMM: Supports one pair of modules inserted into eithor the blue slots or the black slots as one pair of Dual-channel memory configuration
• 4 DIMM: Supports 4 modules inserted into both the blue and black slots as two pairs of Dual-channel memory configuration
-When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended.
-It is recommended to install the memory modules from the slots for better overclocking capability.
-The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for
overclocking may operate at a lower frequency than the vendor-marked value.