Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

POORNIMA INSTITUTE OF ENGINEERING & TECHNOLOGY, JAIPUR

Final Year Industrial Training Seminar Report Format

Note:

1. Yellow Highlighted text in Report formats must be removed in your main

Report.

1. Introduction

This document describes the standard format for INDUSTRIAL TRAINING reports to be
submitted as part of the fulfilment of the B.Tech Degree at the Department of Computer
Engineering of PIET. Students have to ensure their reports conform to the required format
before submission. Last Date for Submission of Report is 10th Sept.2022

2. Industrial Training Seminar Report

2.1 Typing Instructions and Length of the

Report
The total length of the main report should be at least 30 A4 pages. The text of the main
report shall be spaced 1.5 lines, with a font TIMES NEW ROMAN of size 12 and justify
alignment for normal text with 1 inch top, left, right and bottom margins. All the titles must
be of size 16 times new roman font and bold. The subtitles must be of font times new
roman with bold effect and size 14. All the specific terms or definitions must be with italic
effect. Appendices and other manuals can be in single space and a smaller font size.
Appendices should be kept small and bounded together with the main report. The report
should be clearly written, and should include only relevant information.

2.2 Format
All Final Year Industrial Training Seminar reports must be prepared in the following
sequence:

1. Front Hard Cover Page

2. Title Page
3. Company/ Online Platform Certificate
4. Declaration
5. Acknowledgment page
6. Abstract
7. Table of Contents
8. List of Tables
9. List of Figures
10. Abbreviations (if any)

MAIN REPORT: Chapter wise

Chapter 1 - Introduction
a. Significance of the training
b. Company profile (Company infrastructure, number of
employees, organizational structure, branches, product,
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

services, project and any other)

Chapter 2 – Technology specification
a. L a n g u a g e learned (in case of project)
b. T o o l s or company technology (in case of case study)

Chapter 3 - Project Description/Technology learned description

Chapter 4 – Snapshots of the project or screen layout (in case of case
study)
5. Limitation & Learning Outcomes
6. Future scope of the Technology
7. References (or bibliography)
8. Appendices (if required)
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

2.2.1 Front and Back Cover and Binding

Spiral binding should be used for all reports and appendices. As sketched in the sample
pages, the words “FINAL YEAR INDUSTRIAL TRAINING SEMINAR REPORT” (font size 11,
bold, upper case, center aligned), INDUSTRIAL TRAINING SEMINAR TOPIC title (font
cambria, font size 14, bold,upper case, center aligned), the student’s name (font size 11,
bold, center aligned), the words “DEPARTMENT OF COMPUTER ENGINEERING”,
“POORNIMA INSTITUTE OF ENGINEERING & TECHNOLOGY, JAIPUR” for PIET (font size 11,
upper case, center aligned) and the academic year 2023-24 (font size 11, center aligned)
should appear on the front cover.
Front Cover of the Report – Sample (Annexure 5.1)

2.2.2 Title Page

The first page of the report should be a title page. It should consist of the words “FINAL
YEAR INDUSTRIAL TRAINING SEMINAR REPORT” (font size 11, bold, upper case, center
aligned), the project title (font cambria, font size 14, bold, upper case, center aligned), the
student’s name (font size 11, bold, center aligned), the words “DEPARTMENT OF COMPUTER
ENGINEERING”, “POORNIMA INSTITUTE OF ENGINEERING & TECHNOLOGY, JAIPUR” (font
size 11, upper case, center aligned) and the academic year (font size 11, center aligned)
and Project No, Guide’s name (font size 10, bold, left aligned), and deliverables (e.g.,
number of document volumes, software, hardware and etc.) (font size 10, left aligned)
should also be included. The cover page should fit on one page.
Title Page – Sample (Annexure 5.2)

2.2.3 Certificate
College Certificate to be included.
Certificate – Sample (Annexure 5.3)
2.2.4
Company Certificate to be included
2.2.5
Declaration to be included (Annexure 5.4)
2.2.4 Acknowledgement
Following the abstract page, students may want to acknowledge the contributions or
assistance of others to the practical training. It should be kept in one double-spaced A4
page. The student must sign on the acknowledgement.
Acknowledgement – Sample (Annexure 5.5)

2.2.5 Abstract Page

It consists of an abstract of the report of not more than 200 words outlining the project. The
abstract should be comprehensible to readers of the report and enable them to judge the
report’s potential interest. The Keywords and Subject Descriptions should follow
immediately after the abstract in the same page, each with not more than five careful
selected items. Any suitable word that reflects the nature and content of the practical
training may be chosen as a keyword. The student should consult the seminar guide when in
doubt which keywords and descriptors be used Briefly formulate the problem that has been
investigated, the solutions derived, the results that have been achieved, and your conclusions.
It should be kept in one double-spaced A4 page with times new roman font size 10 and
aligned as justify.

Abstract – Sample (Annexure 5.6)

 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

2.2.6 Table of Contents

In addition to the heading of each section, sub-heading can also be used but its depth
should be kept to a minimum. Details of appendices should also be given here. Students
may use more than one A4 page for the content page.
Table of Contents – Sample (Annexure 5.7)

2.2.7 List of Tables

The list should use exactly the same captions as they appear above the tables in the text.
One and a half spacing should be adopted for typing the matter under this head.
List of Tables – Sample (Annexure 5.8)

2.2.8 List of Figures

The list should use exactly the same captions as they appear below the figures in the text.
One and a half spacing should be adopted for typing the matter under this head.
List of Figures – Sample (Annexure 5.9)

2.2.9 Main report

Add Header & Footer on from the Introduction (Chapter-1) Page to the End of your
Report. (Annexure 5.11).
The structure of the main part of the report will vary according to the nature of the practical
training. It is both convenient and conventional to organize the report in a hierarchical
structure: Chapters, Sections, Sub-sections, and
etc.

2.2.10 Appendices

Information of secondary importance (and information whose inclusion would break the flow
of the report) should be placed in Appendices. These include programme listing, electronic
data sheets and data dictionary etc.
 Appendices should be numbered using Arabic numerals, e.g. Appendix 1, Appendix
2, etc.
 Appendices, Tables and References appearing in appendices should be numbered
and referred to at appropriate places just as in the case of chapters.
 Appendices shall carry the title of the work reported and the same title shall be made
in the contents page also.
Appendices – Sample (Annexure 5.12)

2.2.11 References
A list of all books, report, papers, etc., referred to in the report or consult during the
course of the practical training should be given under the References or Bibliography
section. The reference material should be listed in the alphabetical order of the first
author. The name of the author/authors should be immediately followed by the year
and other details. A typical illustrative list given below relates to the citation example
quoted above.
References – Sample (Annexure 5.13)

REFERENCES
References – Sample (Annexure 5.14)
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

1. Ariponnammal, S. and Natarajan, S. (1994) ‘Transport Phonomena of SmSel – X

Asx’, Pramana – Journal of Physics Vol.42, No.1, pp.421-425.
2. Barnard, R.W. and Kellogg, C. (1980) ‘Applications of Convolution Operators to
Problems in Univalent Function Theory’, Michigan Mach, J., Vol.27, pp.81–
94.
3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of Mechanical
Manipulations and its Applications’, Proc. Amer. Contr. Conf., San Diego, CA, pp. 1231-
1236.

2.2.12 Table and figures

By the word Table, is meant tabulated numerical data in the body of the industrial training
report as well as in the appendices. All other non-verbal materials used in the body of the
project work and appendices such as charts, graphs, maps, photographs and diagrams may
be designated as figures.

2.2.13 Page number and Section number

The number of pages for main report is at least 30. The page number here starts from the
first page of Introduction to the last page of conclusion/summary. All other pages like
abstract, contents, list of figures, list of tables, list of abbreviations, acknowledgements, list
of references, bibliography, are not counted in these 100 pages. Please number 1, 2, 3, to
100 (the maximum) for your main report and number i, ii for all other pages in front of the
main report. You are requested to continue your main report numbering for
reference/bibliography pages that come at the
end.
A hierarchical numbering scheme for chapter numbering shall be used. For instances, use
1 for chapter one, 2 for chapter 2, 1.1 for the subsection of chapter 1, and etc (See the
Table
of Contents).

3. Deliverables
01 Copies of the report.
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

FINAL YEAR INDUSTRIAL TRAINING SEMINAR

REPORT

INDUSTRIAL TRAINING
SEMINAR REPORT TOPIC

Submitted in partial fulfilment of the Degree of Bachelor of Technology

Rajasthan Technical University

By

Student Name
(Registration No.)

DEPARTMENT OF COMPUTER ENGINEERING

POORNIMA INSTITUTE OF ENGINEERING & TECHNOLOGY, JAIPUR
(Academic Year 2023-24)
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

RAJASTHAN TECHNICAL UNIVERSITY

POORNIMA INSTITUTE OF ENGINEERING & TECHNOLOGY, JAIPUR

CERTIFICATE

This is to certify that Final Year Industrial Training Seminar Report entitled
“PROJECT NAME” has been submitted by “Student Name (Registration No.), XYZ
(CE/11/001)” for partial fulfilment of the Degree of Bachelor of Technology of
Rajasthan Technical University. It is found satisfactory and approved for
submission.

Date: <Date>

Dr. Anil Kumar Dr. Dinesh Goyal

Head, Director,
Dept. of Comp Engg PIET, Jaipur

PIET, Jaipur

ii
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

Company Certificate to be attached

iii
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

DECLARATION

I hereby declare that the Industrial Training Seminar report entitled “Project Name
(in capital)" was carried out and written by me under the guidance of <Faculty
Name/Mentor> , Assistant Professor, Department of Computer Engineering,
Poornima Institute of Engineering & Technology, Jaipur. This work has not been
previously formed the basis for the award of any degree or diploma or certificate nor
has been submitted elsewhere for the award of any degree or diploma.

Place: Student Name

Date: Registration Number

iv
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

ACKNOWLEDGEMENT

A project of such a vast coverage cannot be realized without help from numerous sources
and people in the organization. I am thankful to Dr. Dinesh Goyal, Director, PIET
for providing me a platform to carry out such a training successfully.

I am also very grateful to Dr. Anil Kumar (HOD,CE) for his kind support.

I would like to take this opportunity to show my gratitude <FacultyName> &

<FacultyName> ( Your Faculty Coordinator, ITS) who helped me in successful
completion of my Final Year Industrial Training. They have guided, motivated & were
source of inspiration for me to carry out the necessary proceedings for the training to be
completed successfully.

I am also grateful to the <Company Project Guide> for his/her guidance

and support.

I am thankful to<Domain Expert> for his/her kind support and providing me expertise of
the domain to develop the project.

I am also privileged to have <Faculty Member(s)> who has/have flourished me with

his/her/their valuable facilities without which this work cannot be completed.

I would also like to express my hearts felt appreciation to all of my friends whose direct or
indirect suggestions help me to develop this project [and to entire team members for their
valuable suggestions.

Lastly, thanks to all faculty members of Computer Engineering department for their moral
support and guidance.

Submitted by:

Student Name:

v
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

ABSTRACT

A prototype system has been developed to connect an IBM PC or compatible to an IBM

3081 mainframe computer for making direct database accesses. The system includes
programs which run on both the PC and the mainframe to allow communications and
to forward database access queries and the results of the queries. The system was
developed based on the ideas which have been used in different microcomputer
packages. However, no existing system includes the widowing functionality, or the
interactive capabilities have been developed here. The system was developed in Turbo
Pascal for the IBM PC, and IBM Pascal on the main frame. The design criteria and the
implementation details are presented in this report.

Keywords:
Distributed databases, micro-mainframe link

Implementation Software and Hardware:

IBM PC/XT, MS_DOS 3.1, MS-Windows, Turbo Pascal 3.0.1, IRMA
Card, IBM 3081, VM/CMS, IBM Pascal

vi
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

Table of Contents

Description Page No.

Title i
Certificate ii
Company Certificate iii
Declaration iv
Acknowledgement v
Abstract vi
List of Table viii
List of Figures ix
List of Abbreviations x
List of Nomenclature xi

Chapter 1: 1
2
…
Chapter 2: ...

Chapter 3: .....

Chapter 4: .....

References ....128

vii
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

List of Tables

Table No Title Page No.

1.1 Thickness of different cables 14

1.2 .............................................. 16

2.1 .................................................. 23

viii
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

List of Figures

Figure No Title Page No.

1.1 Schematic representation of a Network 5

1.3 Architecture of Linux 9

2.1 ......................................... 16
.
.

.
.
5.7 ......................................................... 58

ix
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

(List of Abbreviations – Sample)

DB Database
JSP Java Server Page
ADSL Asymmetric Digital Subscriber Line

.
.
.
.

x
 Final Year Industrial Training Seminar Report, Academic Year 2023-24(Odd), PIET, Jaipur

Chapter 1

Introduction to Topic Name

1.1 Introduction

………..

…………………….

……………………………………….

……………………………………………………….

……………………………………………………………………………………………………
……………….

Page No. 1 Prepared By: Student Name

 REFERENCES

1. Ariponnammal, S. and Natarajan, S. (1994) ‘Transport Phonomena of SmSel – X

Asx’, Pramana – Journal of Physics Vol.42, No.1, pp.421-425.
2. Barnard, R.W. and Kellogg, C. (1980) ‘Applications of Convolution Operators to
Problems in Univalent Function Theory’, Michigan Mach, J., Vol.27, pp.81–
94.
3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of Mechanical
Manipulations and its Applications’, Proc. Amer. Contr. Conf., San Diego, CA, pp.
1231-1236.