Shotgun

Based on: Amount of parts: Enclosure type:

JHS Double Barrel High, total 105 components 1590bb
Effect type: Technology: Get your board at:
Two integrated overdrives Op-amp Shotgun
Build difficult: Power consumption: Get your kit at:
Advanced 9V Das Musikding (Europe)

Project overview:

Inspired by JHS Double Barrel, two overdrive circuits from JHS’ range integrated into one board. Is time to
double the fun! Tone stacking for low-to-medium gain settings doesn't get any better.

Shotgun by PCB Guitar Mania 1

Document version 1.1v, 11th May 2022
Index
1. Project overview 5. Schematic
2. Index, Introduction & Controls 6. Components, Build Notes, Wiring Diagram
3. Bills of Materials, BOM 7. Drill Template, Licensing and Usage
4. Shopping Lists

Introduction
Shotgun features the latest versions of two of JHS's most popular drive circuits: the Morning Glory V4 and
Moonshine V2.

On one side, the best seller Morning Glory V4, delivering a transparent tone. This segment adds a layer of
light crunch that gives more life to chords and sustains to lead lines. On the other side, the updated
Moonshine V2 overdrive, ready to offer that classic TS-tone with a lot of grit and saturation. This section
has an added knob that lets you blend your unaffected signal with the dirt from the pedal al lets you achieve
some fantastic Southern blues tones.

Each part of this board is excellent on its own, but the real magic starts to happen when you combine them.
Tones that are unique and new will come with ease: Looking for a more colorful crunch tone? Run the
Moonshine into the Morning Glory for added gain. Want a gritty solo boost? Toggle the Morning Glory into
the Moonshine, then dial in to taste. Since both pedals are grouped inside the same board, there are no
cables to swap and no footwork to master, and you will have extra flexibility thanks to the "order switching"
toggle.

Try this versatile but transparent overdrive that works flawlessly at medium and light gain levels. And if you
are having problems getting the exact tones you want, with the Shotgun you'll find out how easy it is to hit
the target!

Controls
Potentiometers  Tone-H

 Drive-G Switches
 Drive-H
 Leve-G  SW3
 Leve-H  Diode-SW-H
 Tone-G  HI-CUT-G

Shotgun by PCB Guitar Mania 2

Document version 1.1v, 11th May 2022
Bill of materials
Resistors R39 50K
Part Value R40 3K6
R1 2M2 R41 10K
R2 4K7 R42 100R
R3 4K7 R43 4K7
R4 1M R44 47K
R5 3K3 R45 47K
R6 10K
R7 47K
Capacitors
R8 47K
Part Value
R9 6K8
C1 10n
R10 220K
C2 47n
R11 1K
C3 10n
R12 6K8
C5 47p
R13 100K
C6 100n
R14 68K
C7 100n
R15 1M
C9 470p
R16 22K
C10 10n
R17 12K
C11 10n
R18 12K
C12 100n
R19 1M
C15 1u
R20 1M
C16 1u
R21 1K
C17 27n
R22 510K
C18 1u
R23 1K
C19 330n
R24 10K
C20 51p
R25 10K
C21 220n
R26 10K
C22 220n
R27 1K
C23 1u
R28 10K
C24 100n
R29 220R
C26 100p
R30 1K
C27 1u
R31 1K
R32 510K
R33 10K Electrolytic Capacitors
R34 100R Part Value
R35 15K C4 100u
R36 15K C8 100u
R37 15K C13 2u2
R38 15K C14 10u

Shotgun by PCB Guitar Mania 3

Document version 1.1v, 11th May 2022
 C25 10u D3 1N914
C28 100u D4 1N914
C29 10u D5 1N914
C30 100u D6 1N914
C31 100u D7 BA482
D8 Red 3mm
D9 BA482
Potentiometers D10 1N4002
Part Value D11 3mm red LED
BLEND B10K D12 1N5817
DRIVE-G B100K D13 1N5817
DRIVE-H A500K
LEVE-G A100K
LEVEL-H B100K
TONE-G B25K
TONE-H W20k

Trimpots
Part Value
IC1 LM833N
IC2 NE5532
IC3 LM833
IC4 TC1044SCPA

Transistors
Part Value
Q1 2N5457
Q2 2N3904
Q3 2N3904

Switches
Part Value
SW3 3PDT
DIODE-SW-H On/Off/On
HI-CUT-G SPDT On-On

Diodes
Part Value
D1 1N5817
D2 3mm red LED

Shotgun by PCB Guitar Mania 4

Document version 1.1v, 11th May 2022
Shopping list
Resistors 4 10n C1, C3, C10, C11 IC
Qty Value Parts 5 1u C15, C16, C18, Qty Value Parts
1 100K R13 C23, C27 1 LM833 IC3
2 100R R34, R42 2 220n C21, C22 1 LM833N IC1
7 10K R6, R24, R25, 1 27n C17 1 NE5532 IC2
R26, R28, R33, 1 330n C19 1 TC1044SCPA IC4
R41 1 470p C9
2 12K R17, R18 1 47n C2
4 15K R35, R36, R37, Transistors
1 47p C5
R38 Qty Value Parts
1 51p C20
6 1K R11, R21, R23, 2 2N3904 Q2, Q3
R27, R30, R31 1 2N5457 Q1
4 1M R4, R15, R19, Electrolytics Capacitors
R20
Qty Value Parts
1 220K R10 Switches
5 100u C4, C8, C28,
1 220R R29 Qty Value Parts
C30, C31
1 22K R16 1 3PDT SW3
3 10u C14, C25, C29
1 2M2 R1 1 2u2 C13 1 SPDT DIODE-SW-H
1 3K3 R5 On/Off/On
1 3K6 R40 1 SPDT On- HI-CUT-G
4 47K R7, R8, R44, Potentiometers On
R45 Qty Value Parts
3 4K7 R2, R3, R43 1 A100K LEVE-G
Diodes
1 50K R39 1 A500K DRIVE-H
Qty Value Parts
2 510K R22, R32 2 B100K DRIVE-G, LEVEL-
H 1 1N4002 D10
1 68K R14
1 B10K BLEND 3 1N5817 D1, D12, D13
2 6K8 R9, R12
1 B25K TONE-G 4 1N914 D3, D4, D5,
1 W20k TONE-H D6
2 BA482 D7, D9
Capacitors
3 3mm red D2, D8, D11
Qty Value Parts
LED
4 100n C6, C7, C12, C24
1 100p C26

Shotgun by PCB Guitar Mania 5

Document version 1.1v, 11th May 2022
Schematic

Shotgun by PCB Guitar Mania 6

Document version 1.1v, 11th May 2022
Components Recommendations
As many people like to experiment with some pedals with higher voltage, always ensure
your electrolytic capacitors' max tolerance is over 25v.

This board has been tested using Film box capacitors for most of the values over 1nf and ceramics discs
for those under 1nf. However, high-quality components such as Wima's Capacitors and Panasonic's
electrolytics can deliver a better performance.

All the resistors used for testing this project are 1/4W Metal Film.

The BOM and Shopping list are exclusive regarding this project. It doesn't include all the hardware like the
3PDT bypass switch, audio/dc jacks, enclosure, etc.

Build Notes
If this is one of your first projects, I recommend you to take a look at our Pedal Building Guide.

For a successful and tidy build, it’s recommended the following order:

1. Resistors & diodes

2. Capacitors, starting with the smaller ones and the ceramic ones.
3. Electrolytic capacitors (always check the polarity)
4. Transistors
5. Wires
6. Potentiometers and switches
7. Off-board wiring

Shotgun by PCB Guitar Mania 7

Document version 1.1v, 11th May 2022
Wiring Diagram

Drill Template
This Project has been planned to fit into a 1590bb enclosure type.

Check the Attached “Drilling templates” to drill the box properly. The files are on Scale 1:1, ready to print
on an A4 page.

Shotgun by PCB Guitar Mania 8

Document version 1.1v, 11th May 2022
Licensing and Usage
We really appreciate your trust and support in buying this PCB, as well as your will to dive into the DIY
electronics world. For us, that's why you can make this project work properly and enjoy not only the building
process but also experiment and play with it on your rig.

We try to reply to every question we receive on our email or our social media. Still, we try to encourage all
our customers to join our PCB Guitar Mania – Builders Group on Facebook to post all your doubts, issues,
suggestions, or requests, share your builds, and have some feedback from other fellow builders and us!

We tested all our projects following this same guide on their standard configurations. Although, not all of
the variations and mods have necessarily been checked. These are suggestions based on the schematic
analysis and the experiences and opinions of others. Feel free to share with us your views and
recommendations regarding the mods your personal experimentation.

These boards may be used for commercial endeavors in any quantity unless expressly noted. No attribution
is necessary, though accreditation or a link back is always much appreciated.

If you are a builder planning to make your own run of pedals, we also offer the service of custom-made
boards with your brand and logo, design according to your specifications.

The only usage restrictions are that, first, you cannot resell the PCB as part of a kit without prior
arrangement with us, and second, you cannot scratch off the silkscreen or other way of trying to hide our
logos and the source of the PCBs. Like it's written above, if you want to have your designs with your brand
and logo, we could undoubtedly reach an agreement.

Follow us on Instagram and Facebook to stay in tune with the latest projects!

Shotgun by PCB Guitar Mania 9

Document version 1.1v, 11th May 2022