DNP Catalogue

CATALOGO 2019
CATALOGUE - KATALOG
INNESTI RAPIDI PER IMPIANTI OLEODINAMICI
Hydraulic Quick Release Couplings
Hydraulik Steck-Kupplungen
Coupleurs Rapides Hydrauliques
INNESTI RAPIDI PER IMPIANTI OLEODINAMICI
Hydraulic Quick Release Couplings
Hydraulik Steck-Kupplungen
Coupleurs Rapides Hydrauliques
DNP Catalogue 2019 www.dnp.it

2 DNP Catalogue 2019 www.dnp.it
INDEX
STRUTTURA DEL CATALOGO / LAYOUT OF THE CATALOGUE 5

DATI TECNICI / TECHNICAL DATA 6
TABELLA CODICI-DIMENSIONI / CODES-DIMENSIONS TABLE 7
NOMOGRAMMA DI FLUSSO / FLOW NOMOGRAM 8
COMPATIBILITÁ FLUIDI-GUARNIZIONI / FLUIDS-SEALS COMPATIBILITY 9
TABELLE DI CONVERSIONE / CONVERSION TABLES 10
FILETTI DISPONIBILI / AVAILABLE THREADS 10

AVVERTENZE / WARNING 11
Prodotti Color pagina Prodotti Color pagina

Series Code page Series Code page
CTR LOCK NUTS 319 PPV3 COLOR

CODE PUSH PULL/STANDARD 200
GGL/GGN SWIVEL JOINTS 314 PPVX PUSH PULL/STAINLESS 209
KFX1 COLOR
CODE HANDGRIP 312 PRH3 COLOR
CODE SCREW/TRAILERS 112
PAO1/PAOC ISO A/STEEL/FREE FLOW 145 PST4 COLOR

CODE FLAT FACE/VEP/STEEL 90
PAV1 ISO A/STEEL 140 PST4 BOP COLOR

CODE FLAT FACE/VEP/BOP 108
PAVX ISO A/STAINLESS STEEL 150 PST4 CS FLAT FACE/VEP/PIN LOCK 98
PBOX ISO B/STAINLESS/FREE FLOW 136 PSTF COLOR

CODE FLAT FACE/VEP/FLANGED 103
PBV1 ISO B/STEEL 118 PTK1 TEMA/DECOMPRESSION 170
PBV1 BOP ISO B/BOP 124 PTO1 TEMA/STEEL/FREE FLOW 173
PBVM ISO B/BRASS 127 PTV1 TEMA/STEEL/POPPET 166
PBVX ISO B/STAINLESS STEEL 132 PVE1 SCREW/TRUCKS 258
PCJ5 1000 BAR/115 SERIES 289 PVM ISO 14540/700 bar 280
PCJ6 1500 BAR/116 SERIES 291 PVM4 ISO 14540/700 bar 283
PDS1 STANDARD/BALL 159 PVR1 SCREW/RoFLEX 261
PDV1 STANDARD/POPPET 154 PVS ISO 14540/700 bar/BALL 277
PFT BRAKE VALVE /ISO 5676 306 PVSX/PVMX ISO 14540/700 bar/STAINLESS 286
PGR/PGV/PSS/PSV/PNZ SPECIAL EXECUTIONS 163 PVT4 COLOR

CODE FLAT FACE/SCREW/STEEL 56
PKK1 ISO A/DECOMPRESSION 212 PVT4 BOP COLOR

CODE FLAT FACE/SCREW/BOP 84
PKK3 COLOR
CODE PUSH PULL/DECOMPRESSION 215 PVT4 CS COLOR
CODE FLAT FACE/SCREW/PIN LOCK 67
PLK4 ISO 16028/DECOMPRESSION 41 PVTF COLOR

CODE FLAT FACE/SCREW/FLANGED 74
PLS1 FLAT FACE/71 SERIES/STEEL 48 PVTX COLOR

CODE FLAT FACE/SCREW/STAINLESS 79
PLSX FLAT FACE/71 SERIES/STAINLESS 52 PVTX BOP COLOR

CODE FLAT FACE/STAINLESS/BOP 87
PLT1 COLOR
CODE ISO 16028/STANDARD 13 PVV3 COLOR
CODE SCREW/ISO 14541 227
PLT4 COLOR
CODE ISO 16028/350 BAR 23 PVV3 CS SCREW/ISO 14541/PIN LOCK 241
PLT5 COLOR
CODE ISO 16028/HIGH RESISTANCE 32 PVVX SCREW/ISO 14541/STAINLESS 247
PLT6 COLOR
CODE ISO 16028/700 BAR 35 SPPP ANCHOR BRACKETS 319
PLT7 COLOR
CODE 700 BAR/HP 38 VAV1 SCREW/GA 9000 251
PLTX COLOR
CODE ISO 16028/STAINLESS STEEL 18 VDV1 SCREW/VV 293
PNO1 H SERIES/STEEL/FREE FLOW 186 VFF1 78 SERIES/WING NUT 266
PNOX H SERIES/STAINLESS/FREE FLOW 190 VFH1 75 SERIES/WING NUT 270
PNV1 H SERIES/STEEL/POPPET 177 VFH1 BOP 75 SERIES/WING NUT/BOP 274
PNVX H SERIES/STAINLESS/POPPET 182 VIV1 SCREW/DN30-DN76 254
PPK3 PUSH PULL/RIGID 221 VNR CHECK VALVES 317
PPK4 PUSH PULL/RIGID/DECOMPRESSION 224 VVT SCREW VALVE 309
PPS1 PUSH PULL/BALL 197 VVV1 SCREW/VVS/STEEL 298
PPV1 PUSH PULL/POPPET 194 VVVX SCREW/VVS/STAINLESS STEEL 302
COLOR
CODE COLOR CODE AVAILABLE
www.dnp.it DNP Catalogue 2019 3

STRUTTURA DEL CATALOGO LAYOUT OF THE CATALOGUE
Ogni serie di innesti rapidi presente nel Each of the quick couplings in this
catalogo è introdotta da un’immagine e catalogue is introduced by a picture and
da alcune note che ne some brief notes describing the main
descrivono le principali TECHNICAL FEATURES.
CARATTERISTICHE TECNICHE.
Per ogni modello viene specificato il tipo These include the type of material, the seals
di materiale, le guarnizioni impiegate, la utilized, the temperature, the working
temperatura e la pressione di esercizio; pressure and in general such data as may
in generale tutti i dati che possono essere be of use in determining which
utili per individuare l’innesto più adatto coupling to select.
all’applicazione. Nella stessa pagina è inoltre On the same page there is also the
presente la tabella con i DATI TECNICI e il table with TECHNICAL DATA and the
grafico delle PERDITE DI CARICO. graph for each individual model of
PRESSURE DROP.
Le pagine successive sono dedicate ai dettagli Subsequent pages give details for
di ogni modello. each individual model.
Vi si trovano il DISEGNO relativo You will find the DRAWINGS for each size
ad ogni dimensione disponibile available in the series presented and the tables
nell’ambito della serie presentata e le listing CODES and DIMENSIONS.
tabelle con i CODICI e le DIMENSIONI.
Nell’ultima pagina di ogni ACCESSORIES with their relative

serie vi sono poi gli drawings and the REPLACEMENT
ACCESSORI con i relativi DISEGNI SEALS are in the last page of the series.
e la tabella con le GUARNIZIONI
DI RICAMBIO.

DATI TECNICI TECHNICAL DATA
I dati sono stati ricavati da accurati test All data is obtained by careful testing carried
eseguiti presso la DNP su banco prova out on DNP’s own certified test
certificato, secondo la norma ISO 18869. bench according to ISO 18869.
In particolare per ogni dimensione viene The following values are indicated for
indicato: each size of coupling:
• il passaggio (in millimetri); • The passage (in millimeters);
• la pressione massima di • The maximum working
esercizio (in MPa); pressure (in MPa);
• la portata nominale e la • Nominal flow and maximum
portata massima (in litri al minuto); flow rate (in liters per minute);
• la pressione minima di • The minimum burst
scoppio (in MPa) sia con le parti pressure (in MPa),
innestate che disinnestate; coupled and uncoupled;
• lo spillaggio, ovvero la perdita di • The spillage, or fluid loss during
fluido in fase di disinnesto (in cc); disconnection (in cc);
Tutte le unità di misura sono espresse All units are given according to the metric
secondo il sistema metrico decimale system (International System).
(Sistema Internazionale). For the conversion in the English System refer
Per la conversione nel Sistema Inglese consulta- to the tables page 10.
re le tabelle di pag. 10. The ratio between burst pressure and working
Generalmente il rapporto tra la pressione di pressure is generally 4:1.
scoppio e quella di utilizzo è 4:1.
PERDITE DI CARICO PRESSURE DROP
Per ogni dimensione di innesto sono Pressure drop charts are given for each
indicati anche i grafici della perdita di size of coupling. Pressure Drop (usually
carico (comunemente definita Δp), ovvero referred to as Δp) denotes the difference
la differenza tra la pressione in entrata e in pressure upstream and downstream
quella in uscita dall’innesto al crescere of the coupling as flow rate increases.
della portata. Esse sono state ricavate su These charts are obtained by testing on
banco prova certificato con le modalità our certified testing bench, following the
richieste dalla norma ISO 18869. methods required by ISO 18869.
DISEGNO DRAWING
I disegni sono realizzati in scala rispetto The drawing is in scale compared to the
al pezzo originale e indicano le principali original piece and includes the principal
misure di ingombro. Tutte le misure sono dimensions. All dimensions are in mm.
espresse in mm. Per la conversione in To convert in inches please refer to the
pollici fare riferimento alla tabella di pag. 10. table on page 10.

TABELLA CODICI - DIMENSIONI CODES - DIMENSIONS TABLE
Le prime colonne indicano le varie misure, The first columns indicate the various
espresse in mm, che non sono quotate dimensions in mm, not indicated in the drawing,
sul disegno, le filettature disponibili the different threads available and
SERIE
e la relativa norma di riferimento. INNESTO the pertinent standard.
Le successive colonne sono invece riservate ISO/A The following columns give the
ai codici dei singoli prodotti, al loro peso e al codes for individual products,
DN13
confezionamento standard. one their weight and standard packaging.
(dimensi
)
Le quantità per confezione sono puramente ISO 12.5 Quantities of each box are indicative and may
indicative e possono essere utilizzate, a be used at the discretion of the customer to
discrezione del cliente, per ordinare scatole order full boxes. Each code is unique and
complete. generally comprises letters designating the
Ogni codice è univoco e generalmente, 1/2” series, a first set of numbers designating
è composto da una parte letterale che individua the size of the coupling, and a second set of
la serie, una prima parte numerica che indica numbers designating the type of thread and the
la dimensione dell’innesto, una seconda parte NPT half-coupling (male or female).
numerica che individua il tipo di filetto,
ed infine il semi-innesto (maschio o femmina). MASCHIO
MINA)
(2 = FEM
ES.: PAV1.1313.013 EXAMPLE: PAV1.1313.013
PAV1 = INNESTO SERIE ISO/A PAV1 = COUPLING ISO A SERIES
13 = DN13 (dimensione ISO 12.5) 13 = DN13 (ISO size 12.5)
13 = 1/2” 13 = 1/2”
01 = NPT 01 = NPT
13.013
3 = MASCHIO (2 = FEMMINA) PAV1.13 3 = MALE (2 = FEMALE)
Se si desidera ordinare un innesto con una When ordering a coupling with a seal other
guarnizione diversa dallo standard, far seguire than standard, proceed as follows
V per FKM o E per EPDM. V for FKM or E for EPDM.
Altri tipi di guarnizione possono essere forniti su O/A SERIES Other types of seal can be supplied on request,
IS G
richiesta, in base al tipo di fluido utilizzato e alla COUPLIN depending on the type of fluid used and the
temperatura di esercizio. Per informazioni working temperature. For general information
generali sulla compatibilità guarnizione/fluido/ DN13 about seals/fluid/temperature compatibility
)
temperatura fare riferimento alla tabella di (ISO 12.5 refer to the table page 9.
pag.9 .
Gli innesti in acciaio inossidabile e in ottone 1/2” Non-standard products can be made to specific
sono normalmente già forniti con guarnizioni in customer requirements. In this case, please
FKM. contact the Technical Office of DNP.
Prodotti fuori standard possono essere realizzati Stainless steel and brass couplings are
su specifiche richieste dei clienti. NPT generally supplied with FKM seals.
A questo scopo rivolgersi all’Ufficio Tecnico DNP. If the code shown in the table is followed by
Se il codice indicato sulla tabella è seguito da an asterisk (*), this means that this coupling is
asterisco (*), il prodotto non è solitamente generally not available from our stock.
MALE
disponibile a magazzino ma viene realizzato su ) It is produced on request of the customer.
(2 = FEMALE
esclusiva richiesta del cliente. If these couplings are required, contact our
Per ordini di questi prodotti si consiglia di Customer Service department for up-to-date
chiedere informazioni al Servizio Clienti DNP. information.
ACCESSORI E GUARNIZIONI DI RICAMBIO ACCESSORIES AND REPLACEMENT SEALS
Per comodità di consultazione e ordinazione, For ease of reference and ordering, for each
per ogni modello di innesto sono indicati sia gli type of couplings are given the available
accessori disponibili (generalmente tappi e accessories (generally protective plugs and caps
cappucci di protezione degli innesti) con il for the couplings) with relevant drawings, and
relativo disegno, sia i codici dei prodotti (in the replacemnet article codes
genere le guarnizioni) che è possibile richiedere (generally concerning the seals).
come ricambio. Si ricorda che non sempre la It should be remembered that the
sostituzione di una guarnizione è un’operazione replacement of a seal is not always a simple
semplice e che, per qualsiasi aiuto o chiarimen- operation but that the DNP Technical
to, l’ufficio tecnico DNP è a disposizione della Department can always be contacted for any
clientela. assistance or clarification that may be required.

NOMOGRAMMA DI FLUSSO FLOW NOMOGRAM
Per tubi assemblati For assembled hoses
Esempio: determinare il diametro minimo del Example: establish the min diameter of the
tubo per un passaggio di 70 l/m. hose for a flow of 70 l/m.
Tracciare una linea da 70 l/m di portata a 6 m/s Draw a line from 70 l/m flow to 6 m/s fluid
di velocità del fluido. La retta interseca la linea velocity. This line intersects the straight line of
del diametro a 15.5 mm. Questo è il diametro diameter at 15.5 mm. This is the ideal nominal
nominale ideale del tubo. diameter of the hose.
Basato sulla formula Hazen-Williams. Based on Hazen-Williams formula.
Portata/Flow in the hose (l/min)
Ø Nominale tubo DN
Inside diameter of hose (mm)
Velocità fluido
Fluid velocity (m/s)
Velocità consigliata per

linee in pressione
Recommended velocity
range for pressure lines

COMPATIBILITA’ FLUIDI/GUARNIZIONI FLUIDS/SEALS COMPATIBILITY
CARATTERISTICHE PHYSICAL and CHEMICAL
Perfluorinated
Perfluorinated
Nitrile Rubber
Diene Rubber
Fluorocarbon
Polyurethane
FISICO CHIMICHE CHARACTERISTICS
Elastomer
Elastomer
Propylene
DELLE GUARNIZIONI OF SEALS
Ethylene
Rubber
Teflon
NBR EPDM AU,EU,PU FKM FFKM KFB P.T.F.E.
COMPATIBILITÀ COMPATIBILITY
Prodotti Chimici 6 10 6 10 10 10 10 Chemicals
Acidi 6 8 6 10 10 10 10 Acids
Acqua e Vapore 6 10 6 6 10 10 10 Water and Steam
Olii e Grassi MINERAL

10 0 8 10 10 10 10
MINERALI Oils and Greases
Olii e Grassi SYNTHETIC
8 0 8 10 10 10 10
SINTETICI Oils and Greases
Benzene 4 4 6 10 10 10 10 Benzene
Benzina 95-98 oct. 4 0 6 10 10 10 10 Gasoline 95-98 oct.
Diesel 8 0 6 10 10 10 10 Diesel
Carburante Fuel
8 4 6 10 10 10 10
ASTM-A/-B ASTM-A/-B
Metano 4 10 6 4 10 10 10 Methane
Gas Liquido 10 10 6 10 10 10 10 Liquid Gas
Gas Naturale 10 10 6 10 10 10 10 Natural Gas
Glicoli 4 10 6 8 10 10 10 Glycols
Paraffina 10 0 6 10 10 10 10 Paraffin
RESISTENZA RESISTANCE
Agenti Atmosferici 4 10 8 10 10 10 10 Weathering
Calore 8 10 6 10 10 10 10 Heat
Freddo 8 9 8 7 8 7 10 Cold
Impermeabilità Gas 8 4 6 10 10 10 10 Gas Impermeability
TEMPERATURE DI LAVORO WORKING TEMPERATURE
T °C MAX di Lavoro +100 °C +150 °C +80 °C +200 °C +315 °C +321 °C +250 °C Working T °C MAX
T °C MIN di Lavoro -25 °C -40 °C -30 °C -25 °C -20 °C -13 °C -200 °C Working T °C MIN
OTTIMO 10 Particolarmente indicato per l'applicazione

EXCELLENT Particularly suitable for application
BUONO 8 Buona resistenza, con variazioni moderate delle propietà
GOOD Good strength, with moderate variations of properties
MEDIOCRE 6 Mediocre resistenza del materiale, con variazioni delle propietà
DOUBTFUL Poor strength of the material, with variations of the properties
SCARSO 4 Scarsa resistenza del materiale con variazione delle propietà
POOR Low resistance of the material, with change of the property
SCONSIGLIATO 0 Non idoneo per l'applicazione, sconsigliato
NOT RECOMMENDED Not suitable for the application, not recommended

TABELLA DI CONVERSIONE CONVERSION TABLES
DIMENSIONI - DIMENSIONS PORTATA - FLOW

1in = 25,4 mm X in = (X*25,4) mm 1 gallon(UK)/min = 4,5459 l/min X gallon(UK)/min = (X*4,5459) l/min
1mm = 0,0394 in Ymm = (Y*0,0394) in 1 l/min = 0,2199 gallon(UK)/min Y l/min = (Y*0,2199) gallon(UK)/min

AREA 1 gallon(US)/min = 3,7848 l/min X gallon(US)/min = (X*3,7848) l/min
1 l/min = 0,2642 gallon(US)/min Y l/min = (Y*0,2642) gallon(US)/min
1 in² (sqin) = 645,16 mm² X in² = (X*645,16) mm²
1 mm² = 0,0016 in² (sqin) Y mm² = (Y*0,0016) in²
PRESSIONE - PRESSURE
PESO - WEIGHT (lb) libbra = pound
1 MPa = 145,038 PSI X MPa = (X*145,038) PSI
1 lb = 453,59 g X lb = (X*453,59) g 1 PSI = 0,0069 MPa Y PSI = (Y*0,0069) MPa
1 g = 0,0022 lb Y g = (Y*0,0022) lb
1 MPa = 10 bar X MPa = (X*10) bar
TEMPERATURA - TEMPERATURE 1 bar = 0,1 MPa Y bar = (Y*0,1) MPa

°C = 0,5555 *(°F-32) X °C = (X*1,8)+32 °F 1 MPa = 9,8692 atm X MPa = (X*9,8692) atm
°F = 1,8*°C +32 Y °F = 0,5555*(Y-32) °C 1 atm = 0,1013 MPa Y atm = (Y*0,1013) MPa
°C = °K +273,15 X °C = (X-273,15) °K
°K = °C -273,15 Y°K (Y+273,15) °C 1 MPa = 20855,4 lbf/ft² X MPa = (X*20855,4) lbf/ft²
1 lbf/ft² = 0,000047 MPa Y lbf/ft² = (Y*0,000047) MPa

FILETTI DISPONIBILI AVAILABLE THREADS
AG 1 AG 2 AG 3 AG 4 AG 5
AG 6 AG 7 AGS 1 AGS 2 AGS 3
AGS 4 AGS 5 AGS 6 IG 1 IG 2

AVVERTENZE ! WARNING
ATTENZIONE!! ATTENTION!!
SI RACCOMANDA DI NON SELEZIONARE O UTILIZZARE PLEASE DO NOT SELECT OR USE THE QUICK COUPLINGS
GLI INNESTI RAPIDI SENZA AVER PRESO VISIONE DELLE WITHOUT HAVING READ THE FOLLOWING REQUIREMENTS
SEGUENTI PRESCRIZIONI ED ISTRUZIONI DI SICUREZZA. AND SAFETY INSTRUCTIONS.
SCELTA - USO - MANUTENZIONE CHOISE - OPERATION - MAINTENANCE

Un’errata scelta del tipo di innesto rapido, un uso improprio o un Incorrect choice of quick couplings, improper use or failure can cause
guasto possono essere causa di danni gravi a cose e persone. serious damage to the equipment and to the operators.
Il catalogo indica alcuni elementi per la scelta e l’impiego degli innesti This catalogue provides some information regarding the choice and
rapidi. Nel dubbio richiedete a noi o al nostro distributore maggiori the application of the quick release couplings. Should you have any
informazioni. doubts please contact us directly or our distributor for further details.
Gli innesti rapidi o gli organi di collegamento possono manifestare Quick release couplings or transmission parts may malfunction or
guasti o danneggiarsi improvvisamente. La progettazione dei sistemi suddenly fail. The planning of hydraulic systems must therefore
idraulici deve considerare soprattutto la sicurezza delle persone e la consider the health and safety of the operators and of the immediate
tutela dell’ambiente. environment.
RESPONSABILITA’ DELL’UTILIZZATORE RESPONSABILITY OF THE USER

La grande varietà odierna delle applicazioi non garantisce che ogni The wide range of applications does not guarantee that each type of
tipo di innesto sia idoneo per qualsiasi sistema. coupling will be suitable for each system. Therefore, the users, with
Pertanto l’utente, con proprie valutazioni e test, è il solo responsabile their evaluation and testing, are solely responsible for selecting the
della scelta del tipo di innesto rapido e dell’accertamento che type of quick couplings and for verifying that the application does not
l’impiego non presenti rischi per la salute e la sicurezza. present any risk to health and safety.
Per qualsiasi chiarimento rivolgersi al nostro Servizio Clienti. Our customer service department is at your disposal to assist you in
Ci si deve comunque accertare che: any enquiries and explanations.
• scegliendo un certo tipo di innesto rapido la PRESSIONE It is essential and of utmost importance:
massima di esercizio dichiarata sia uguale o superiore alla pressione • to ensure that the maximum declared working PRESSURE of the
massima del sistema; chosen quick coupling is greater than or equal to the maximum working
• il FLUIDO sia compatibile con i materiali dell’innesto rapido e delle pressure of the system;
sue guarnizioni di tenuta; • that the FLUID is compatible with the materials and seals of the
• la TEMPERATURA del fluido non ecceda quella indicata. quick release coupling;
Qualora la temperatura del fluido fosse elevata, proteggere le mani • that the fluid TEMPERATURE does not exceed the declared limits.
durante le operazioni di innesto e disinnesto. In cases of high fluid temperature hands must be correctly protected
during connection and disconnection.
Il DIMENSIONAMENTO dovrà essere tale da ridurre al minimo le
perdite di pressione, la generazione di calore o l’eccessiva velocità del DIMENSIONS must be precise to reduce to the minimum any pressure
fluido. La velocità consigliata va dai 4 ai 10 m/s. loss, heat generation or the speed of the fluid flow. Recommended
Per un corretto dimensionamento dell’innesto rispetto alla portata speed range: from 4 to 10 m/s. For a correct sizing of the coupling
richiesta e alla velocità del fluido fare riferimento al Nomogramma compared to the required flow rate and speed refear to the flow
di flusso di pag.8. nomogram page 8.
I CARICHI LATERALI o le VIBRAZIONI possono danneggiare o ridurre LATERAL LOADS or VIBRATION can damage or reduce the life of the
la durata dell’innesto. quick coupling. Take care to CLEAN well equipments. Dirt or residual
Prestare massima cura alla PULIZIA degli impianti. Sporco o residui parts in the circuit may cause damage to the couplings.
nel circuito possono causare danni agli innesti rapidi. All technical information in this catalogue may not be valid if DNP
Tutte le indicazioni tecniche presenti nel catalogo potrebbero non half couplings were connected with HALF-COUPLINGS OF OTHER
essere valide nel caso venissero accoppiati semi-innesti DNP con MANUFACTURERS. In any case we recommend you never exceed the
SEMI-INNESTI DI ALTRI PRODUTTORI. In ogni caso raccomandiamo di lowest working pressure between the two products.
non superare mai la pressione d’esercizio più bassa tra i due prodotti. Do not apply excessive thighening torque when assembling fitting
Non applicare una coppia di serraggio eccessiva in fase di assemblaggio in the couplings with CONICAL THREADS to prevent leakages or
dei raccordi negli innesti con FILETTATURA CONICA in modo da evitare ruptures of the couplings. We recommend to apply on the thread a
crepe o rotture dell’innesto. Si consiglia l’applicazione di un sigillante liquid sealant or paste.
liquido o in pasta sulla filettatura. Please note that couplings are not swivel joints and therefore their use
Si ricorda che l’innesto non è un giunto girevole ed è quindi sconsigliato is not recommended in the presence of ROTATIONS.
in presenza di ROTAZIONI nell’applicazione.
If a connection or disconnection UNDER PRESSURE is required, only
Nel caso fosse richiesto l’accoppiamento o il disaccoppiamento con couplings specified exclusively for this purpose shall be used.
CIRCUITO IN PRESSIONE utilizzare solo innesti progettati per questo Make sure that the quick release couplings are compatible with the
impiego. work environment, and that they are kept CLEAN, especially those
Accertarsi che gli innesti rapidi siano compatibili con l’ambiente di parts whose functionality may become damaged. For this purpose,
lavoro e che siano mantenuti PULITI soprattutto nelle parti che caps and plugs are available for each type of coupling.
possono pregiudicarne la funzionalità. A questo scopo, per ogni In all cases of doubt please do not hesitate to contact us and we will
modello di innesto, sono disponibili tappi e cappucci di protezione. supply you with detailed instructions concerning maintenance and
Qualora aveste dubbi non esitate ad interpellarci per ottenere installation.
istruzioni più dettagliate su manutenzione e istruzioni per l’installazione .


ATTENZIONE
Si ricorda che ogni dato presente nel catalogo è

indicativo e può essere soggetto a modifiche e
variazioni, a discrezione della DNP, in qualsiasi
momento.
IMPORTANT
All data contained in the catalogue is indicative,

and subject to change at the discretion of DNP
without notice at any time.


PLT1
ISO 16028
VALVOLA PIANA/ACCIAIO
FLAT FACE/STEEL
FLACHDICHTEND/STAHL
CLAPET PLAT/ACIER
Caratteristiche tecniche I
• Norma: ISO 16028 (DN06→DN30)

• Occlusione: faccia piana
• Aggancio: sfere radiali
• Materiale: acciaio
• Finitura: Zn-Fe (Cr III)
• Filettature: BSP - NPT - SAE
• Guarnizioni standard: NBR
• Temperatura d’esercizio: -25 °C +100 °C Min burst pressure
Max working
• Guarnizioni opzionali: FKM, EPDM o altro
flow rate
pressure
Coupled
spillage
• Pressioni di esercizio: 250-300 bar
Female
Rated
Fluid
Male
flow
Max
• Connessione in pressione: non consentita Nominal size
DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
06 1 6.3 6 30 12 24 180 120 140 0.008

Technical data E
13 2 10 8.6 25 23 46 160 100 160 0.010
20 3 12.5 10.7 25 45 90 150 110 190 0.012
• Standard: ISO 16028 (DN06→DN30)
• Occlusion: flat face 25 4 19 14.8 25 100 200 140 110 140 0.020
• Locking: radial balls 30 5 25 17.6 25 189 280 130 100 140 0.030
• Material: steel 35 6 31.5 26 20 260 520 80 110 80 0.040
• Finishing: Zn-Fe (Cr III)
39 7 38 30 20 379 700 120 110 110 0.050
• Threads: BSP - NPT - SAE
• Standard seals: NBR 50 8 51 40.6 15 757 1000 70 65 65 0.100
• Working temperature: -25 °C +100 °C 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Optional seals: FKM, EPDM or more
• Working pressure: 250-300 bar
• Connection under pressure: not allowed
Technische Merkmale D
• Norm: ISO 16028 (DN06→DN30)

• Verschluss: flachdichtend
• Kupplung: Radial Kugeln
• Werkstoff: Stahl
• Ausführung: Zn-Fe (Cr III)
• Gewinde: BSP - NPT - SAE
• Standard-Dichtungen: NBR
• Betriebstemperatur: -25 °C +100 °C
• Dichtungen nach Wahl: FKM, EPDM, usw.
• Betriebsdruck: 250-300 bar
• Kuppeln unter Druck: nicht möglich
Caracteristiques techniques F
• Norme: ISO 16028 (DN06→DN30)

• Obturation: clapet plat
• Accrochage: billes radiales
• Matériel: acier
• Traitement: Zn-Fe (Cr III)
• Taraudage: BSP - NPT - SAE
• Joints standard: NBR
• Température de service: -25 °C +100 °C
• Joints facultatifs: FKM, EPDM, ect.
• Pression de service: 250-300 bar
• Connexion sous pression: pas possible

PLT1
PLT1 DN06 - BG 1 - ISO 6.3
F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE

COD. F Weight (g) Packaging (pcs.) COD. M Weight (g) Packaging (pcs.)
BSP 1/4" DIN 3852-2-X PLT1.0606.002 181 100 PLT1.0606.003 96 200

NPT 1/4" ANSI B1.20.3 PLT1.0606.012 181 100 PLT1.0606.013 96 200
PLT1 DN13 - BG 2 - ISO 10
L2 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE

67.3 63.5 BSP 3/8" DIN 3852-2-X PLT1.1310.002 256 60 PLT1.1310.003 156 76
67.3 63.5 NPT 3/8" ANSI B1.20.3 PLT1.1310.012 259 60 PLT1.1310.013 159 76
72.3 67.5 BSP 1/2" DIN 3852-2-X PLT1.1313.002 253 60 PLT1.1313.003 151 76
72.3 67.5 NPT 1/2" ANSI B1.20.3 PLT1.1313.012 256 60 PLT1.1313.013 154 76
PLT1 DN20 - BG 3 - ISO 12.5
CH2 L2 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
32 78.5 72.5 BSP 1/2" DIN 3852-2-X PLT1.2013.002 413 35 PLT1.2013.003 305 42
32 84 74 NPT 1/2" ANSI B1.20.3 PLT1.2013.012 408 35 PLT1.2013.013 314 42
36 84 74.5 BSP 3/4" DIN 3852-2-X PLT1.2019.002 445 35 PLT1.2019.003 282 42
36 84 74 NPT 3/4" ANSI B1.20.3 PLT1.2019.012 451 35 PLT1.2019.013 290 42

PLT1

BSP 3/4" DIN 3852-2-X PLT1.2519.002 850 23 PLT1.2519.003 478 30

NPT 3/4" ANSI B1.20.3 PLT1.2519.012 857 23 PLT1.2519.013 485 30
BSP 1" DIN 3852-2-X PLT1.2525.002 789 23 PLT1.2525.003 423 30
NPT 1" ANSI B1.20.3 PLT1.2525.012 801 23 PLT1.2525.013 435 30

BSP 1"¼ DIN 3852-2-X PLT1.3031.002 1139 7 PLT1.3031.003 648 20

NPT 1"¼ ANSI B1.20.3 PLT1.3031.012 1162 7 PLT1.3031.013 661 20
PLT1 DN35 - BG 6 - ISO 31.5
THREADS F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
IG 1 BSP 1"¼ DIN 3852-2-X PLT1.3531.002 2376 5 PLT1.3531.003 1117 10

NPT 1"¼ ANSI B1.20.3 PLT1.3531.012 2400 5 PLT1.3531.013 1130 10
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PLT1.3541.032 2388 5 PLT1.3541.033 1120 10
THREADS
IG 1 IG 2

PLT1
IG 1 BSP 1"½ DIN 3852-2-X PLT1.3939.002 2703 5 PLT1.3939.003 1879 10

NPT 1"½ ANSI B1.20.3 PLT1.3939.012 2718 5 PLT1.3939.013 1893 10
IG 2 1"7/8-12 UN 2B SAE J 1926-1 PLT1.3947.032 2680 5 PLT1.3947.033 1840 10
IG 1 BSP 2" DIN 3852-2-X PLT1.5051.112 6015 5 See PLK4 DN50

NPT 2" ANSI B1.20.3 PLT1.5051.012 6045 5 See PLK4 DN50
1"½ SAE 3000 PLT1.5051.002 6440 5 See PLK4 DN50
IG 2 2"½-12 UN 2B SAE J 1926-1 PLT1.5063.032 5895 5 See PLK4 DN50
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PLT1
PLASTIC CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST CAP COLOR MATERIAL
Dimensions Weight Dimensions Weight
DNP BG ISO COD. F D L D1 (g) COD. M D L D1 (g)

06 1 6.3 SPLT.06002 32.5 200 20 16 SPLT.06003 26 200 20 13 PVC
13 2 10 SPLT.13002 37 200 26 21 SPLT.13003 27.5 200 26 15 PVC
20 3 12.5 SPLT.20002 43 200 31.5 29 SPLT.20003 35 200 31.5 26 PVC
25 4 19 SPLT.25002 53.5 265 35 51 SPLT.25003 43 265 35 41 PVC
30 5 25 SPLT.30002 61 280 50 75 SPLT.30003 51 270 50 60 PVC
METAL CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST CAP MATERIAL

06 1 6.3 SPLT.06202 35 200 32 41 SPLT.06203 25 200 32 28 Aluminum
13 2 10 SPLT.13202 40 200 32 48 SPLT.13203 30 200 32 39 Aluminum
25 4 19 SPLT.25202 55 275 47.5 74 SPLT.25203 40 275 47.5 66 Aluminum
35 6 31.5 SPLT.35202* - - - - SPLT.35203* - - - - Aluminum
50 8 50 SPLT.50202 114 275 47.5 360 See PLK4 DN50 Aluminum
*REALIZZATI SU RICHIESTA
DEL CLIENTE
*AVAILABLE ON REQUEST
*AUF ANFRAGE LIEFERBAR
*DISPONIBLES SUR
DEMANDE
AUTOMATIC CAPS NOMINAL SIZE AUTOMATIC FEMALE CAP COLOR MATERIAL

Dimensions Weight
DNP BG ISO COD. F D S (g)

13 2 10 SPLT.13302 38 16.8 17 Nylon
13 2 10 SPLT.13342 38 16.8 17 Nylon
20 3 12.5 SPPV.13302 46 18.4 24 Nylon
20 3 12.5 SPPV.13312 46 18.4 24 Nylon
20 3 12.5 SPPV.13322 46 18.4 24 Nylon
20 3 12.5 SPPV.13332 46 18.4 24 Nylon
20 3 12.5 SPPV.13342 46 18.4 24 Nylon
SPARE PARTS NOMINAL SIZE MALE GASKET MALE GASKET * AL CODICE DELLA GUARNIZIONE IN NBR
AGGIUNGERE ‘E’ PER EPDM O ‘V’ PER VITON
DNP BG ISO OR (NBR*) BK (PTFE) PU (POLYURETHANE)
*TO THE NBR GASKET CODE ADD ‘E’ FOR
06 1 6.3 PLT.006.120 PLT.006.130 - EPDM OR ‘V’ FOR VITON
13 2 10 PLT.013.120 PLT.013.130 PLK.013.210 *ZU DER ARTIKELNR. DER NBR DICHTUNG

GEBEN SIE ‘E’ FUER EPDM ODER ‘V’ FUER
20 3 12.5 PLT.019.120 PLT.019.130 PVT.019.210 VITON AN
25 4 19 PLT.025.120 PLT.025.130 PVT.025.210 *AU CODE DU JOINT EN NBR JOINDRE ‘E’
POUR EPDM OU ‘V’ POUR VITON
30 5 25 PLT.031.120 PLT.031.130 PVT.030.210

35 6 31.5 PLS.025.120 PLT.035.130 -
39 7 38 PLT.039.120 PLT.039.130 -
50 8 51 PLK.050.120 PLK.050.130 -

PLTX
ISO 16028
COLOR
VALVOLA PIANA/ACCIAIO INOX
FLAT FACE/STAINESS STEEL
CODE
FLACHDICHTEND/EDELSTAHL
CLAPET PLAT/ACIER INOX

• Materiale: acciaio inox AISI 316
• Guarnizioni standard: FKM
• Temperatura d’esercizio: -25 °C + 200 °C Min burst pressure
Max working
• Guarnizioni opzionali: EPDM, FFKM o altro
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Connessione in pressione: non consentita Nominal size
06 1 6.3 6 30 12 24 260 160 130 0.008
Technical data E 13 2 10 8.6 25 23 46 140 100 190 0.010

20 3 12.5 10.7 25 45 90 130 100 160 0.012
• Standard: ISO 16028 (DN06→DN30) 22 4A 16 12.8 25 74 150 110 100 140 0.015
• Locking: radial balls
30 5 25 17.6 25 189 280 100 100 100 0.030
• Material: stainless steel AISI 316
• Threads: BSP - NPT - SAE 39 7 38 30 15 379 700 60 60 60 0.050
• Standard seals: FKM 50 8 51 40.6 10 757 1000 40 40 40 0.100
• Optional seals: EPDM, FFKM or more
• Norm: ISO 16028 (DN06→DN30)

• Werkstoff: rostfreiem Stahl AISI 316
• Standard-Dichtungen: FKM
• Dichtungen nach Wahl: EPDM, FFKM, usw.

• Matériel: acier inoxydable AISI 316
• Joints standard: FKM
• Joints facultatifs: EPDM, FFKM, ect.

PLTX
PLTX DN06 - BG 1- ISO 6.3
COD. F Weight (g) Packaging COD. M Weight (g) Packaging
(pcs.) (pcs.)
IG 1 BSP 1/4" DIN 3852-2-X PLTX.0606.112 186 100 PLTX.0606.113 121 200
NPT 1/4" ANSI B1.20.3 PLTX.0606.012 187 100 PLTX.0606.013 122 200
IG 2 9/16"-18 UNF 2B SAE J 1926-1 PLTX.0615.032 183 100 PLTX.0615.033 118 200
PLTX DN13 - BG 2 - ISO 10
THREADS L2 L3 L4 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(pcs.) (pcs.)
IG 1 73.5 69.5 BSP 3/8" DIN 3852-2-X PLTX.1310.112 298 60 PLTX.1310.113 172 76
73.5 69.5 NPT 3/8" ANSI B1.20.3 PLTX.1310.012 300 60 PLTX.1310.013 175 76
73.5 69 BSP 1/2" DIN 3852-2-X PLTX.1313.112 286 60 PLTX.1313.113 156 76
73.5 73 NPT 1/2" ANSI B1.20.3 PLTX.1313.012 287 60 PLTX.1313.013 171 76
IG 2 73.5 70 3/4"-16 UNF 2B SAE J 1926-1 PLTX.1319.032 290 60 PLTX.1319.033 174 76
AG 3 73 68 12 M20x1.5 ISO 8434-1-S PLTX.1320.402 276 60 PLTX.1320.403 156 76
PLTX DN20 - BG 3 - ISO 12.5
COD. F Weight Packaging COD. M Weight Packaging
(g) (pcs.) (g) (pcs.)
83.5 83 BSP 3/4" DIN 3852-2-X PLTX.2019.112 510 35 PLTX.2019.113 326 42
IG 2 83.5 83 1”1/16-12 UN 2B SAE J 1926-1 PLTX.2027.032 508 35 PLTX.2027.033 324 42
AG 3 84.5 80 14 M24x1.5 ISO 8434-1-S PLTX.2024.402 489 35 PLTX.2024.403 300 42
THREADS
IG 1 IG 2 AG 3

PLTX
PLTX DN22 - BG 4A - ISO 16
(g) (pcs.) (g) (pcs.)
IG 1 86 81.5 BSP 1/2" DIN 3852-2-X PLTX.2213.112 591 30 PLTX.2213.113 385 42
86 82 NPT 1/2" ANSI B1.20.3 PLTX.2213.012 596 30 PLTX.2213.013 392 42
86 83 BSP 3/4" DIN 3852-2-X PLTX.2219.112 557 30 PLTX.2219.113 360 42
86 83 NPT 3/4" ANSI B1.20.3 PLTX.2219.012 566 30 PLTX.2219.013 370 42
IG 2 86 83 1”1/16-12 UN 2B SAE J 1926-1 PLTX.2227.032 549 30 PLTX.2227.033 355 42
AG 3 87 80 14 M24x1.5 ISO 8434-1-S PLTX.2224.402 535 30 PLTX.2224.403 335 42
THREADS L2 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
95.5 90.5 NPT 3/4" ANSI B1.20.3 PLTX.2519.012 855 23 PLTX.2519.013 503 30
97.5 90.5 BSP 1" DIN 3852-2-X PLTX.2525.112 803 23 PLTX.2525.113 451 30
97.5 93.5 NPT 1" ANSI B1.20.3 PLTX.2525.012 814 23 PLTX.2525.013 480 30
IG 2 95 93.5 1"5/16-12 UN 2B SAE J 1926-1 PLTX.2533.032 794 23 PLTX.2533.033 431 30
THREADS
IG 1 IG 2 AG 3

PLTX

COD. F Weight (g) Packaging COD. M Weight Packaging
(pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PLTX.3025.112 1275 7 PLTX.3025.113 820 20
NPT 1" ANSI B1.20.3 PLTX.3025.012 1295 7 PLTX.3025.013 831 20
BSP 1”¼ DIN 3852-2-X PLTX.3031.112 1164 7 PLTX.3031.113 744 20
NPT 1”¼ ANSI B1.20.3 PLTX.3031.012 1175 7 PLTX.3031.013 757 20

(pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PLTX.3939.112 2844 5 PLTX.3939.113 2134 8
NPT 1"½ ANSI B1.20.3 PLTX.3939.012 2859 5 PLTX.3939.013 2149 8

(pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PLTX.5051.112 4790 5 PLTX.5051.113 3200 6
NPT 2" ANSI B1.20.3 PLTX.5051.012 4650 5 PLTX.5051.013 3110 6

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PLTX

06 1 6.3 SPLT.06002 32.5 200 20 16 SPLT.06003 26 200 20 13 PVC
13 2 10 SPLT.13002 37 200 26 21 SPLT.13003 27.5 200 26 15 PVC
20 3 12.5 SPLT.20002 43 200 31.5 29 SPLT.20003 35 200 31.5 26 PVC
25 4 19 SPLT.25002 53.5 265 35 51 SPLT.25003 43 265 35 41 PVC
30 5 25 SPLT.30002 61 280 50 75 SPLT.30003 51 270 50 60 PVC

22 4A 16 SPLT.22202 50 200 32 63 SPLT.22203 35 200 32 43 Aluminum
50 8 51 SPLTX.50202 110 275 47.5 320 SPLK.50203 83 275 47.5 210 Aluminum

Dimensions Weight

13 2 10 SPLT.13302 38 16.8 17 Nylon
13 2 10 SPLT.13342 38 16.8 17 Nylon
20 3 12.5 SPPV.13302 46 18.4 24 Nylon
20 3 12.5 SPPV.13312 46 18.4 24 Nylon
20 3 12.5 SPPV.13322 46 18.4 24 Nylon
20 3 12.5 SPPV.13332 46 18.4 24 Nylon
20 3 12.5 SPPV.13342 46 18.4 24 Nylon
SPARE PARTS NOMINAL SIZE MALE GASKET

DNP BG ISO OR (FKM) BK (PTFE)
06 1 6.3 PLT.006.120 V PLT.006.130

13 2 10 PLT.013.120 V PLT.013.130
20 3 12.5 PLT.019.120 V PLT.019.130
22 4A 16 PLT.022.120 V PLT.022.130
25 4 19 PLT.025.120 V PLT.025.130
30 5 25 PLT.031.120 V PLT.031.130
39 7 38 PLT.039.120 V PLT.039.130
50 8 51 PLTX.050.120 V PLTX.050.130

PLT4
ISO 16028/350 bar

COLOR
FLAT FACE/STEEL
CODE
FLACHDICHTEND/STAHL
CLAPET PLAT/ACIER

• Finitura: Zn-Fe (Cr III) e Zn-Ni
• Filettature: BSP - NPT - SAE - METRICHE
• Guarnizioni standard: NBR e PU
• Temperatura d’esercizio: -25 °C +100 °C
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
• Connessione in pressione: non consentita
Fluid
Male
flow
Max
Nominal size
Technical data E 04 0 5 4 50 3 9 250 210 250 0.006

06 1 6.3 6 40 12 24 190 190 190 0.008
• Standard: ISO 16028 (DN06→DN30) 13 2 10 8.6 35 23 46 150 170 160 0.010
• Occlusion: flat face
20 3 12.5 10.7 35 45 90 170 150 170 0.012
• Material: steel 22 4A 16 12.8 35 74 150 160 140 150 0.015
• Finishing: Zn-Fe (Cr III) and Zn-Ni 25 4 19 14.8 35 100 200 160 140 180 0.020
• Threads: BSP - NPT - SAE - METRIC 30 5 25 17.6 35 189 280 140 140 150 0.030
• Standard seals: NBR and PU 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Working temperature: -25 °C +100 °C
• Norm: ISO 16028 (DN06→DN30)

• Ausführung: Zn-Fe (Cr III) und Zn-Ni
• Gewinde: BSP - NPT - SAE - METRISCHE
• Standard-Dichtungen: NBR und PU

• Traitement: Zn-Fe (Cr III) et Zn-Ni
• Taraudage: BSP - NPT - SAE - METRIQUES
• Joints standard: NBR et PU

PLT4
(pcs.) (g) (pcs.)
IG 1 48.6 43.5 BSP 1/8" DIN 3852-2-X PLT4.0404.112 93 192 PLT4.0404.113 52 300
48.6 43.5 NPT 1/8" ANSI B1.20.3 PLT4.0404.012 94 192 PLT4.0404.013 52 300
IG 2 50.6 45.5 7/16"-20 UNF 2B SAE J 1926-1 PLT4.0412.032 95 192 PLT4.0412.033 54 300
THREADS
IG 1 IG 2

PLT4
PLT4 DN06 - BG 1 - ISO 6.3
THREADS L2 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 58.5 52 BSP 1/4" DIN 3852-2-X PLT4.0606.112 181 100 PLT4.0606.113 95 200
58.5 52 NPT 1/4" ANSI B1.20.3 PLT4.0606.012 182 100 PLT4.0606.013 96 200
58.5 52 RC 1/4” UNI ISO 7/1 PLT4.0606.042 182 100 PLT4.0606.043 98 200
58.5 52 BSP 3/8" DIN 3852-2-X PLT4.0610.112 170 100 PLT4.0610.113 86 200
58.5 52 NPT 3/8" ANSI B1.20.3 PLT4.0610.012 173 100 PLT4.0610.013 88 200
58.5 52 M16x1.5 ISO 6149-1 PLT4.0616.102 173 100 PLT4.0616.103 89 200
58.5 52 M18x1.5 ISO 6149-1 PLT4.0618.102 166 100 PLT4.0618.103 82 200
IG 2 58.5 52 9/16"-18 UNF 2B SAE J 1926-1 PLT4.0615.032 178 100 PLT4.0615.033 92 200
AG 7 63.5 53.8 14 NPT 1/4" ANSI B1.20.3 PLT4.0606.022 169 100 PLT4.0606.023 82 200
63.5 53.8 14 R 1/4"-19 UNI ISO 7/1 PLT4.0606.052 168 100 PLT4.0606.053 82 200
63 53.8 14 NPT 3/8" ANSI B1.20.3 PLT4.0610.022 173 100 PLT4.0610.023 90 200
AG 5 64 54.3 12 BSP 3/8" DIN 3852-2-B PLT4.0610.212 202 100 PLT4.0610.213 88 200
63.5 53.8 12 BSP 1/4" DIN 3852-2-A PLT4.0606.712 172 100 PLT4.0606.713 83 200
64 54.3 12 BSP 3/8" DIN 3852-2-A PLT4.0610.712 202 100 PLT4.0610.713 88 200
AG 2 63.6 53.9 14.1 9/16"-18 UNF 2A SAE J 514 PLT4.0615.302 194 100 PLT4.0615.303 80 200
AGS 2 82.8 73.1 33.3 9/16"-18 UNF 2A SAE J 514 PLT4.0615.502 181 70 PLT4.0615.503 93 150
AG 3 59.5 49.8 10 06L M12x1.5 ISO 8434-1-L PLT4.0612.302 165 100 PLT4.0612.303 77 200
59.5 49.8 10 08L M14x1.5 ISO 8434-1-L PLT4.0614.302 166 100 PLT4.0614.303 78 200
60.5 50.8 11 10L M16x1.5 ISO 8434-1-L PLT4.0616.302 168 100 PLT4.0616.303 79 200
60.5 50.8 11 12L M18x1.5 ISO 8434-1-L PLT4.0618.302 168 100 PLT4.0618.303 80 200
61.5 51.8 12 08S M16x1.5 ISO 8434-1-S PLT4.0616.402 171 100 PLT4.0616.403 83 200
61.5 51.8 12 10S M18x1.5 ISO 8434-1-S PLT4.0618.402 173 100 PLT4.0618.403 85 200
61.5 51.8 12 12S M20x1.5 ISO 8434-1-S PLT4.0620.402 176 100 PLT4.0620.403 87 200
AGS 3 75.5 65.8 26 06L M12x1.5 ISO 8434-1-L PLT4.0612.502 182 70 PLT4.0612.503 94 150
75.5 65.8 26 08L M14x1.5 ISO 8434-1-L PLT4.0614.502 186 70 PLT4.0614.503 98 150
75.5 65.8 26 10L M16x1.5 ISO 8434-1-L PLT4.0616.502 193 70 PLT4.0616.503 104 150
75.5 65.8 26 12L M18x1.5 ISO 8434-1-L PLT4.0618.502 196 70 PLT4.0618.503 109 150
76.5 66.8 27 08S M16x1.5 ISO 8434-1-S PLT4.0616.602 199 70 PLT4.0616.603 112 150
76.5 66.8 27 10S M18x1.5 ISO 8434-1-S PLT4.0618.602 207 70 PLT4.0618.603 119 150
76.5 66.8 27 12S M20x1.5 ISO 8434-1-S PLT4.0620.602 217 70 PLT4.0620.603 128 150
IG 1 IG 2 AG 2 AG 3 AG 5
THREADS
AG 7 AGS 2 AGS 3

PLT4
(g) (pcs.) (g) (pcs.)
73.5 60.5 BSP 3/8" DIN 3852-2-X PLT4.1310.112 309 60 PLT4.1310.113 158 60
73.5 63.5 NPT 3/8" ANSI B1.20.3 PLT4.1310.012 311 60 PLT4.1310.013 184 60
73.5 61.5 RC 3/8” UNI ISO 7/1 PLT4.1310.042 311 60 PLT4.1310.043 179 60
73.5 60.5 BSP 1/2" DIN 3852-2-X PLT4.1313.112 294 60 PLT4.1313.113 154 60
73.5 63.5 NPT 1/2" ANSI B1.20.3 PLT4.1313.012 297 60 PLT4.1313.013 168 60
74.5 65 RC 1/2” UNI ISO 7/1 PLT4.1313.042 301 60 PLT4.1313.043 175 60
73.5 60.5 M14x1.5 ISO 6149-1 PLT4.1314.102 317 60 PLT4.1314.103 167 60
73.5 60.5 M16x1.5 ISO 6149-1 PLT4.1316.102 312 60 PLT4.1316.103 162 60
73.5 60.5 M18x1.5 ISO 6149-1 PLT4.1318.102 305 60 PLT4.1318.103 155 60
73.5 60.5 M20x1.5 ISO 6149-1 PLT4.1320.102 301 60 PLT4.1320.103 158 60
IG 2 72 60.5 9/16-18 UNF 2B SAE J 1926-1 PLT4.1315.032 309 60 PLT4.1315.033 165 60
73.5 60.5 3/4"-16 UNF 2B SAE J 1926-1 PLT4.1319.032 301 60 PLT4.1319.033 160 60
74.5 64.5 7/8"-14 UNF 2B SAE J 1926-1 PLT4.1323.032 287 60 PLT4.1323.033 159 60
74.5 62.5 M16x1.5 SAE J 2244/1 PLT4.1316.112 311 60 PLT4.1316.113 175 60
74.5 63.5 M22x1.5 SAE J 2244/1 PLT4.1322.102 293 60 PLT4.1322.103 162 60
AG 1 74.5 60.5 13 M14x1.5 ISO 6149-2 PLT4.1314.222 286 60 PLT4.1314.223 134 60
77.5 63.5 16 M20x1.5 ISO 6149-2 PLT4.1320.222 297 60 PLT4.1320.223 145 60
AG 5 77 62 12 BSP 3/8" DIN 3852-2-B PLT4.1310.212 293 60 PLT4.1310.213 136 60
79 64.5 13 BSP 1/2" DIN 3852-2-B PLT4.1313.212 303 60 PLT4.1313.213 144 60
74 58.5 11 M16x1.5 DIN 3863-U PLT4.1316.702 283 60 PLT4.1316.703 128 60
78 63.5 16 M20x1.5 DIN 3863-U PLT4.1320.702 293 60 PLT4.1320.703 141 60
76 61.5 14 M22x1.5 DIN 3863-U PLT4.1322.702 290 60 PLT4.1322.703 138 60
79.7 64.2 16.7 3/4"-16 UNF 2A SAE J 514 PLT4.1319.302 291 60 PLT4.1319.303 139 60
104.1 88.6 41.1 7/8"-14 UNF 2A SAE J 514 PLT4.1323.502 330 60 PLT4.1323.503 178 60
AG 3 72.5 57.5 10 08L M14x1.5 ISO 8434-1-L PLT4.1314.302 278 60 PLT4.1314.303 126 60
73.5 58.5 11 10L M16x1.5 ISO 8434-1-L PLT4.1316.302 279 60 PLT4.1316.303 127 60
73.5 58.5 11 12L M18x1.5 ISO 8434-1-L PLT4.1318.302 280 60 PLT4.1318.303 125 60
74.5 59.5 12 15L M22x1.5 ISO 8434-1-L PLT4.1322.302 286 60 PLT4.1322.303 130 60
74.5 59.5 12 18L M26x1.5 ISO 8434-1-L PLT4.1326.302 301 60 PLT4.1326.303 138 60
74.5 59.5 12 10S M18x1.5 ISO 8434-1-S PLT4.1318.402 285 60 PLT4.1318.403 133 60
74.5 59.5 12 12S M20x1.5 ISO 8434-1-S PLT4.1320.402 288 60 PLT4.1320.403 135 60
76.5 61.5 14 14S M22x1.5 ISO 8434-1-S PLT4.1322.402 293 60 PLT4.1322.403 140 60
76.5 61.5 14 16S M24x1.5 ISO 8434-1-S PLT4.1324.402 296 60 PLT4.1324.403 141 60
AGS 3 88.5 73.5 26 08L M14x1.5 ISO 8434-1-L PLT4.1314.502 297 60 PLT4.1314.503 146 60
88.5 73.5 26 10L M16x1.5 ISO 8434-1-L PLT4.1316.502 304 60 PLT4.1316.503 152 60
88.5 73.5 26 12L M18x1.5 ISO 8434-1-L PLT4.1318.502 309 60 PLT4.1318.503 153 60
98.5 83.5 36 12L M18x1.5 ISO 8434-1-L PLT4.1318.512 320 60 PLT4.1318.513 164 60
89.5 74.5 27 15L M22x1.5 ISO 8434-1-L PLT4.1322.502 334 60 PLT4.1322.503 179 60
89.5 74.5 27 18L M26x1.5 ISO 8434-1-L PLT4.1326.502 370 60 PLT4.1326.503 212 60
89.5 74.5 27 10S M18x1.5 ISO 8434-1-S PLT4.1318.602 319 60 PLT4.1318.603 167 60
89.5 74.5 27 12S M20x1.5 ISO 8434-1-S PLT4.1320.602 328 60 PLT4.1320.603 175 60
91.5 76.5 29 14S M22x1.5 ISO 8434-1-S PLT4.1322.602 345 60 PLT4.1322.603 194 60
91.5 76.5 29 16S M24x1.5 ISO 8434-1-S PLT4.1324.602 352 60 PLT4.1324.603 199 60

PLT4
PLT4 DN20 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
83.5 74 NPT 1/2" ANSI B1.20.3 PLT4.2013.012 532 35 PLT4.2013.013 314 42
83.5 74 RC 1/2" UNI ISO 7/1 PLT4.2013.042 534 35 PLT4.2013.043 315 42
83.5 74.5 BSP 3/4" DIN 3852-2-X PLT4.2019.112 498 35 PLT4.2019.113 282 42
83.5 74 NPT 3/4" ANSI B1.20.3 PLT4.2019.012 507 35 PLT4.2019.013 287 42
83.5 74 RC 3/4" UNI ISO 7/1 PLT4.2019.042 511 35 PLT4.2019.043 290 42
82.5 70.5 M18x1.5 ISO 6149-1 PLT4.2018.102 534 35 PLT4.2018.103 300 42
82.5 70 M22x1.5 ISO 6149-1 PLT4.2022.102 517 35 PLT4.2022.103 283 42
83.5 74 M26x1.5 ISO 6149-1 PLT4.2026.102 496 35 PLT4.2026.103 280 42
83.5 74 M30x1.5 ISO 6149-1 PLT4.2030.102 470 35 PLT4.2030.103 254 42
IG 2 79.5 70 3/4"-16 UNF 2B SAE J 1926-1 PLT4.2019.032 507 35 PLT4.2019.033 293 42
81.5 74 7/8"-14 UNF 2B SAE J 1926-1 PLT4.2023.032 512 35 PLT4.2023.033 306 42
83.5 74 1"1/16-12 UN 2B SAE J 1926-1 PLT4.2027.032 492 35 PLT4.2027.033 276 42
89.8 78.3 19.3 7/8"-14 UNF 2A SAE J 514 PLT4.2023.302 461 35 PLT4.2023.303 257 42
92.5 81 22 1"1/16-12 UN 2A SAE J 514 PLT4.2027.302 470 35 PLT4.2027.303 272 42
111.6 100.1 41.1 7/8"-14 UNF 2A SAE J 514 PLT4.2023.502 510 30 PLT4.2023.503 291 42
115.9 104.4 45.4 1"1/16-12 UN 2A SAE J 514 PLT4.2027.502 544 30 PLT4.2027.503 324 42
AG 5 89.5 78 16 BSP 3/4" DIN 3852-2-A PLT4.2019.712 477 35 PLT4.2019.713 273 42
AGS 4 109 97.5 38.5 1"-14 UNS 2A SAE J 1453 PLT4.2025.532 539 30 PLT4.2025.533 323 42
110.5 99 40 1"3/16-12 UN 2A SAE J 1453 PLT4.2030.532 581 30 PLT4.2030.533 367 42
AG 3 81.5 70 11 12L M18x1.5 ISO 8434-1-L PLT4.2018.302 453 35 PLT4.2018.303 239 42
82.5 71 12 15L M22x1.5 ISO 8434-1-L PLT4.2022.302 458 35 PLT4.2022.303 244 42
82.5 71 12 18L M26x1.5 ISO 8434-1-L PLT4.2026.302 466 35 PLT4.2026.303 250 42
84.5 73 14 22L M30x2 ISO 8434-1-L PLT4.2030.302 468 35 PLT4.2030.303 254 42
82.5 71 12 10S M18x1.5 ISO 8434-1-S PLT4.2018.402 460 35 PLT4.2018.403 243 42
82.5 71 12 12S M20x1.5 ISO 8434-1-S PLT4.2020.402 462 35 PLT4.2020.403 246 42
84.5 73 14 14S M22x1.5 ISO 8434-1-S PLT4.2022.402 466 35 PLT4.2022.403 250 42
84.5 73 14 16S M24x1.5 ISO 8434-1-S PLT4.2024.402 469 35 PLT4.2024.403 252 42
86.5 75 16 20S M30x2 ISO 8434-1-S PLT4.2030.402 481 35 PLT4.2030.403 267 42
AGS 3 96.5 85 26 12L M18x1.5 ISO 8434-1-L PLT4.2018.502 484 30 PLT4.2018.503 267 42
97.5 86 27 15L M22x1.5 ISO 8434-1-L PLT4.2022.502 508 30 PLT4.2022.503 292 42
97.5 86 27 18L M26x1.5 ISO 8434-1-L PLT4.2026.502 542 30 PLT4.2026.503 324 42
104.5 93 34 22L M30x2 ISO 8434-1-L PLT4.2030.502 576 30 PLT4.2030.503 361 42
97.5 86 27 10S M18x1.5 ISO 8434-1-S PLT4.2018.602 491 30 PLT4.2018.603 276 42
97.5 86 27 12S M20x1.5 ISO 8434-1-S PLT4.2020.602 508 30 PLT4.2020.603 286 42
99.5 88 29 14S M22x1.5 ISO 8434-1-S PLT4.2022.602 515 30 PLT4.2022.603 302 42
99.5 88 29 16S M24x1.5 ISO 8434-1-S PLT4.2024.602 528 30 PLT4.2024.603 310 42
104.5 93 34 20S M30x2 ISO 8434-1-S PLT4.2030.602 571 30 PLT4.2030.603 356 42
THREADS

PLT4
PLT4 DN22 - BG 4A - ISO 16
(pcs.) (g) (pcs.)
IG 1 86 72.5 BSP 1/2" DIN 3852-2-X PLT4.2213.112 576 30 PLT4.2213.113 326 42
86 74 NPT 1/2" ANSI B1.20.3 PLT4.2213.012 579 30 PLT4.2213.013 340 42
86 74 RC 1/2" UNI ISO 7/1 PLT4.2213.042 581 30 PLT4.2213.043 340 42
86 74.5 BSP 3/4" DIN 3852-2-X PLT4.2219.112 545 30 PLT4.2219.113 307 42
86 74 NPT 3/4" ANSI B1.20.3 PLT4.2219.012 553 30 PLT4.2219.013 312 42
86 74 RC 3/4" UNI ISO 7/1 PLT4.2219.042 558 30 PLT4.2219.043 315 42
85 70.5 M18x1.5 ISO 6149-1 PLT4.2218.102 580 30 PLT4.2218.103 325 42
85 70 M22x1.5 ISO 6149-1 PLT4.2222.102 563 30 PLT4.2222.103 308 42
86 74 M26x1.5 ISO 6149-1 PLT4.2226.102 542 30 PLT4.2226.103 305 42
86 74 M30x1.5 ISO 6149-1 PLT4.2230.102 516 30 PLT4.2230.103 279 42
IG 2 82 70 3/4"-16 UNF 2B SAE J 1926-1 PLT4.2219.032 553 30 PLT4.2219.033 318 42
84 74 7/8"-14 UNF 2B SAE J 1926-1 PLT4.2223.032 558 30 PLT4.2223.033 331 42
86 74 1"1/16-12 UN 2B SAE J 1926-1 PLT4.2227.032 538 30 PLT4.2227.033 301 42
AG 2 89.7 75.7 16.7 3/4”-16 UNF 2A SAE J 514 PLT4.2219.302 497 30 PLT4.2219.303 273 42
92.3 78.3 19.3 7/8”-14 UNF 2A SAE J 514 PLT4.2223.302 507 30 PLT4.2223.303 282 42
95 81 22 1"1/16-12 UN 2A SAE J 514 PLT4.2227.302 516 30 PLT4.2227.303 297 42
AGS 2 110.6 96.6 37.6 3/4”-16 UNF 2A SAE J 514 PLT4.2219.502 540 30 PLT4.2219.503 311 42
114.1 100.1 41.1 7/8"-14 UNF 2A SAE J 514 PLT4.2223.502 557 30 PLT4.2223.503 316 42
118.4 104.4 45.4 1"1/16-12 UN 2A SAE J 514 PLT4.2227.502 591 30 PLT4.2227.503 349 42
AG 5 90 78 16 BSP 3/4" DIN 3852-2-A PLT4.2219.712 524 30 PLT4.2219.713 298 42
AGS 4 111.5 97.5 38.5 1"-14 UNS 2A SAE J 1453 PLT4.2225.532 586 30 PLT4.2225.533 348 42
113 99 40 1”3/16-12 UN 2A SAE J 1453 PLT4.2230.532 628 30 PLT4.2230.533 392 42
AG 3 84 70 11 12L M18x1.5 ISO 8434-1-L PLT4.2218.302 500 30 PLT4.2218.303 264 42
85 71 12 15L M22x1.5 ISO 8434-1-L PLT4.2222.302 505 30 PLT4.2222.303 269 42
85 71 12 18L M26x1.5 ISO 8434-1-L PLT4.2226.302 513 30 PLT4.2226.303 275 42
87 73 14 22L M30x2 ISO 8434-1-L PLT4.2230.302 515 30 PLT4.2230.303 279 42
85 71 12 10S M18x1.5 ISO 8434-1-S PLT4.2218.402 506 30 PLT4.2218.403 268 42
85 71 12 12S M20x1.5 ISO 8434-1-S PLT4.2220.402 509 30 PLT4.2220.403 271 42
87 73 14 14S M22x1.5 ISO 8434-1-S PLT4.2222.402 513 30 PLT4.2222.403 275 42
87 73 14 16S M24x1.5 ISO 8434-1-S PLT4.2224.402 516 30 PLT4.2224.403 277 42
89 75 16 20S M30x2 ISO 8434-1-S PLT4.2230.402 528 30 PLT4.2230.403 292 42
AGS 3 99 85 26 12L M18x1.5 ISO 8434-1-L PLT4.2218.502 530 30 PLT4.2218.503 293 42
100 86 27 15L M22x1.5 ISO 8434-1-L PLT4.2222.502 554 30 PLT4.2222.503 317 42
100 86 27 18L M26x1.5 ISO 8434-1-L PLT4.2226.502 588 30 PLT4.2226.503 349 42
107 93 34 22L M30x2 ISO 8434-1-L PLT4.2230.502 623 30 PLT4.2230.503 386 42
100 86 27 10S M18x1.5 ISO 8434-1-S PLT4.2218.602 538 30 PLT4.2218.603 301 42
100 86 27 12S M20x1.5 ISO 8434-1-S PLT4.2220.602 554 30 PLT4.2220.603 312 42
102 88 29 14S M22x1.5 ISO 8434-1-S PLT4.2222.602 562 30 PLT4.2222.603 327 42
102 88 29 16S M24x1.5 ISO 8434-1-S PLT4.2224.602 575 30 PLT4.2224.603 335 42
107 93 34 20S M30x2 ISO 8434-1-S PLT4.2230.602 618 30 PLT4.2230.603 381 42
THREADS
AGS 2 AGS 3 AGS 4

PLT4
(g) (pcs.) (g) (pcs.)
94.5 86 NPT 3/4" ANSI B1.20.3 PLT4.2519.012 814 23 PLT4.2519.013 485 30
94.5 86 RC 3/4” UNI ISO 7/1 PLT4.2519.042 816 23 PLT4.2519.043 485 30
97.5 86 BSP 1" DIN 3852-2-X PLT4.2525.112 780 23 PLT4.2525.113 414 30
97.5 86 NPT 1" ANSI B1.20.3 PLT4.2525.012 786 23 PLT4.2525.013 427 30
97.5 86 M30x1.5 ISO 6149-1 PLT4.2530.102 810 23 PLT4.2530.103 450 30
IG 2 95 86 1"1/16-12 UN 2B SAE J 1926-1 PLT4.2527.032 817 23 PLT4.2527.033 471 30
95 86 1"5/16-12 UN 2B SAE J 1926-1 PLT4.2533.032 758 23 PLT4.2533.033 413 30
AG 2 99.1 90.1 23.1 1”5/16-12 UN 2A SAE J 514 PLT4.2533.302 822 23 PLT4.2533.303 412 30
AGS 2 121.4 112.4 45.4 1”5/16-12 UN 2A SAE J 514 PLT4.2533.502 881 23 PLT4.2533.503 510 30
AG 5 97 88 18 BSP 1" DIN 3852-2-B PLT4.2525.212 818 23 PLT4.2525.213 420 30
95 84 17 BSP 1" BS B5200 PLT4.2525.702 751 23 PLT4.2525.703 398 30
95 86 16 BSP 3/4" DIN 3852-2-A PLT4.2519.712 797 23 PLT4.2519.713 396 30
97 88 18 BSP 1" DIN 3852-2-A PLT4.2525.712 775 23 PLT4.2525.713 422 30
AG 3 97 79 12 18L M26x1.5 ISO 8434-1-L PLT4.2526.302 773 23 PLT4.2526.303 373 30
99 81 14 22L M30x2 ISO 8434-1-L PLT4.2530.302 777 23 PLT4.2530.303 378 30
99 81 14 28L M36x2 ISO 8434-1-L PLT4.2536.302 776 23 PLT4.2536.303 383 30
101 83 16 20S M30x2 ISO 8434-1-S PLT4.2530.402 790 23 PLT4.2530.403 389 30
103 85 18 25S M36x2 ISO 8434-1-S PLT4.2536.402 807 23 PLT4.2536.403 412 30
AGS 3 119 101 34 18L M26x1.5 ISO 8434-1-L PLT4.2526.502 864 23 PLT4.2526.503 461 30
119 101 34 22L M30x2 ISO 8434-1-L PLT4.2530.502 882 23 PLT4.2530.503 486 30
119 101 34 28L M36x2 ISO 8434-1-L PLT4.2536.502 910 23 PLT4.2536.503 524 30
121 103 36 20S M30x2 ISO 8434-1-S PLT4.2530.602 902 23 PLT4.2530.603 503 30
123 105 38 25S M36x2 ISO 8434-1-S PLT4.2536.602 960 23 PLT4.2536.603 565 30
THREADS
AGS 2 AGS 3

PLT4
THREADS CH2 CH3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 50 50 BSP 1" DIN 3852-2-X PLT4.3025.112 1236 7 PLT4.3025.113 726 20
50 50 NPT 1" ANSI B1.20.3 PLT4.3025.012 1260 7 PLT4.3025.013 733 20
55 55 BSP 1"¼ DIN 3852-2-X PLT4.3031.112 1238 7 PLT4.3031.113 769 20
55 55 NPT 1"¼ ANSI B1.20.3 PLT4.3031.012 1253 7 PLT4.3031.013 781 20
IG 2 50 50 1"5/16-12 UN 2B SAE J 1926-1 PLT4.3033.032 1235 7 PLT4.3033.033 715 20
55 55 1"5/8-12 UN 2B SAE J 1926-1 PLT4.3041.032 1241 7 PLT4.3041.033 768 20
THREADS
IG 1 IG 2


06 1 6.3 SPLT.06002 32.5 200 20 16 SPLT.06003 26 200 20 13 PVC
13 2 10 SPLT.13002 37 200 26 21 SPLT.13003 27.5 200 26 15 PVC
20 3 12.5 SPLT.20002 43 200 31.5 29 SPLT.20003 35 200 31.5 26 PVC
25 4 19 SPLT.25002 53.5 265 35 51 SPLT.25003 43 265 35 41 PVC
30 5 25 SPLT.30002 61 280 50 75 SPLT.30003 51 270 50 60 PVC

22 4A 16 SPLT.22202 50 200 32 63 SPLT.22203 35 200 32 43 Aluminum

Dimensions Weight

13 2 10 SPLT.13302 38 16.8 17 Nylon
13 2 10 SPLT.13342 38 16.8 17 Nylon
20 3 12.5 SPPV.13302 46 18.4 24 Nylon
20 3 12.5 SPPV.13312 46 18.4 24 Nylon
20 3 12.5 SPPV.13322 46 18.4 24 Nylon
20 3 12.5 SPPV.13332 46 18.4 24 Nylon
20 3 12.5 SPPV.13342 46 18.4 24 Nylon
SPARE PARTS NOMINAL SIZE MALE GASKET MALE GASKET

04 0 5 PLT.004.120 PLT.004.130 -
06 1 6.3 PLT.006.120 PLT.006.130 -
13 2 10 PLT.013.120 PLT.013.130 PLK.013.210
20 3 12.5 PLT.019.120 PLT.019.130 PVT.019.210
22 4A 16 PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PLT.031.120 PLT.031.130 PVT.030.210
* AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER EPDM O ‘V’ PER VITON
* TO THE NBR GASKET CODE ADD ‘E’ FOR EPDM OR ‘V’ FOR VITON
* ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER EPDM ODER ‘V’ FUER VITON AN
* AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU ‘V’ POUR VITON

PLT5
ISO 16028
COLOR
MASCHIO VALVOLA PIANA PER MARTELLI
FLAT FACE MALE FOR HAMMERS
CODE
FLACHDICHTENDER STECKER FÜR HÄMMER
MÂLE CLAPET PLAT POUR MARTEAUX
• Norma: ISO 16028

• Materiale: acciaio alta resistenza
• Pressioni di esercizio: 350 bar
Technical data E Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
• Standard: ISO 16028
Rated
Fluid
Male
flow
Max
• Occlusion: flat face Nominal size
• Locking: radial balls DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Material: high resistance steel 25 4 19 14.8 35 100 200 160 See PLT4 180 0.020
• Finishing: Zn-Fe (Cr III) and Zn-Ni
30 5 25 17.6 35 189 280 140 See PLT4 150 0.030
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Standard seals: NBR and PU
• Working pressure: 350 bar
• Norm: ISO 16028

• Werkstoff: hochfestiger Stahl
• Betriebsdruck: 350 bar
• Norme: ISO 16028

• Matériel: acier à haute résistance
• Pression de service: 350 bar

PLT5
COD. F COD. M Weight Packaging
(g) (pcs.)
IG 1 BSP 3/4" DIN 3852-2-X See PLT4 DN25 PLT5.2519.113 491 30
NPT 3/4" ANSI B1.20.3 See PLT4 DN25 PLT5.2519.013 498 30
BSP 1" DIN 3852-2-X See PLT4 DN25 PLT5.2525.113 427 30
NPT 1" ANSI B1.20.3 See PLT4 DN25 PLT5.2525.013 440 30
IG 2 1"1/16-12 UN 2B SAE J 1926-1 See PLT4 DN25 PLT5.2527.033 485 30
1"5/16-12 UN 2B SAE J 1926-1 See PLT4 DN25 PLT5.2533.033 426 30
THREADS CH3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X See PLT4 DN30 PLT5.3025.113 726 20
50 NPT 1" ANSI B1.20.3 See PLT4 DN30 PLT5.3025.013 733 20
55 BSP 1"¼ DIN 3852-2-X See PLT4 DN30 PLT5.3031.113 797 20
55 NPT 1"¼ ANSI B1.20.3 See PLT4 DN30 PLT5.3031.013 810 20
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 See PLT4 DN30 PLT5.3033.033 715 20
55 1"5/8-12 UN 2B SAE J 1926-1 See PLT4 DN30 PLT5.3041.033 799 20
THREADS
IG 1 IG 2

PLASTIC CAPS NOMINAL SIZE MALE DUST CAP COLOR MATERIAL

Dimensions Weight
DNP BG ISO COD. M D L D1 (g)

25 4 19 SPLT.25003 43 265 35 41 PVC
30 5 25 SPLT.30003 51 270 50 60 PVC
METAL CAPS NOMINAL SIZE MALE DUST CAP MATERIAL

Dimensions Weight

25 4 19 SPLT.25203 40 275 47.5 66 Aluminum
30 5 25 SPLT.30203 45 275 47.5 71 Aluminum

25 4 19 PLT.025.120 PLT.025.130 PVT.025.210

30 5 25 PLT.031.120 PLT.031.130 PVT.030.210
*TO THE NBR GASKET CODE ADD ‘E’ FOR EPDM OR ‘V’ FOR VITON
*ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER EPDM ODER ‘V’ FUER VITON AN
*AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU ‘V’ POUR VITON


PLT6
ISO 16028/700 bar

COLOR
FLAT FACE/STEEL
CODE
FLACHDICHTEND/STAHL
CLAPET PLAT/ACIER

• Materiale: acciaio alta resistenza
• Connessione in pressione: non consentita Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Technical data E Nominal size

06 1 6.3 6 70 12 24 200 230 230 0.008
• Material: high resistance steel 1 MPa = 145.04 psi • 1 l = 0.264 gal

• Norm: ISO 16028



PLT6
PLT6 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
58.5 52 NPT 1/4" ANSI B1.20.3 PLT6.0606.012 182 100 PLT6.0606.013 97 200
58.5 NPT 3/8” ANSI B1.20.3 PLT6.0610.012 180 100
58.5 RC 3/8” UNI ISO 7/1 PLT6.0610.042 180 100
63 53.8 14 NPT 3/8" ANSI B1.20.3 PLT6.0610.022 175 100 PLT6.0610.023 90 200
53.8 14 R 3/8” UNI ISO 7/1 PLT6.0610.053 92 200
(g) (pcs.) (g) (pcs.)
73.5 63.5 NPT 3/8" ANSI B1.20.3 PLT6.1310.012 311 60 PLT6.1310.013 209 60
AG 7 76.5 14 NPT 3/8" ANSI B1.20.3 PLT6.1310.022 289 60
THREADS
IG 1 IG 2 AG 7


06 1 6.3 SPLT.06002 32.5 200 20 16 SPLT.06003 26 200 20 13 PVC
13 2 10 SPLT.13002 37 200 26 21 SPLT.13003 27.5 200 26 15 PVC


Dimensions Weight

13 2 10 SPLT.13302 38 16.8 17 Nylon
13 2 10 SPLT.13342 38 16.8 17 Nylon

06 1 6.3 PLT.006.120 PLT.006.130 -

13 2 10 PLT.013.120 PLT.013.130 PLK.013.210


PLT7
700 bar
COLOR
FLAT FACE/STEEL
CODE
FLACHDICHTEND/STAHL
CLAPET PLAT/ACIER
• Intercambiabilità: Stucchi HP
• Materiale: acciaio ad alta resistenza
• Filettature: BSP - NPT
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Interchange: Stucchi HP DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc

• Locking: radial balls 06 1 6.3 6 70 12 24 200 230 230 0.008
• Threads: BSP - NPT
• Austauschbarkeit: Stucchi HP
• Gewinde: BSP - NPT
• Interchangeabilité: Stucchi HP
• Taraudage: BSP - NPT

PLT7
(g) (pcs.) (g) (pcs.)
48.6 43.5 NPT 1/8" ANSI B1.20.3 PLT7.0404.012 93 192 PLT7.0404.013 50 300
PLT7 DN06 - BG1- ISO 6.3
(g) (pcs.) (g) (pcs.)
58.5 53.3 NPT 1/4" ANSI B1.20.3 PLT7.0606.012 183 100 PLT7.0606.013 98 200
58.5 53.3 NPT 3/8" ANSI B1.20.3 PLT7.0610.012 174 100 PLT7.0610.013 89 200
63 53.8 14 NPT 3/8" ANSI B1.20.3 PLT7.0610.022 176 100 PLT7.0610.023 91 200
AG 5 63.5 53.8 12 BSP 1/4" DIN 3852-2-A PLT7.0606.712 173 100 PLT7.0606.713 84 200
61.5 54.3 12 BSP 3/8" DIN 3852-2-A PLT7.0610.712 176 100 PLT7.0610.713 90 200
THREADS
IG 1 IG 2 AG 5 AG 7


06 1 6.3 SPLT.06002 32.5 200 20 16 SPLT.06003 26 200 20 13 PVC

DNP BG ISO OR (NBR*) BK (PTFE)
04 0 5 PLT.704.120 PLT.704.130
06 1 6.3 PLT.006.120 PLT.706.130

PLK4
ISO 16028
MASCHIO INNESTABILE IN PRESSIONE

MALE CONNECTABLE UNDER PRESSURE
STECKER UNTER DRUCK KUPPELBAR
MÂLE ACCOUPLABLE SOUS PRESSION

Min burst pressure
Max working
• Connessione in pressione: consentita
flow rate
pressure
(solo lato maschio)
Coupled
spillage
Female
Rated
Fluid
Male
• Massima pressione residua: 250 bar
flow
Max
Nominal size
Technical data E DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
06 1 6.3 6 40 12 24 190 See PLT4 190 0.008

• Occlusion: flat face 13 2 10 8.6 35 23 46 140 See PLT4 140 0.010
• Locking: radial balls 20 3 12.5 10.7 35 45 90 140 See PLT4 140 0.012
• Material: high resistance steel 22 4A 16 12.8 35 74 150 140 See PLT4 140 0.015
• Finishing: Zn-Fe (Cr III) and Zn-Ni 25 4 19 14.8 30 100 200 120 See PLT4 120 0.020
• Threads: BSP - NPT - SAE - METRIC
30 5 25 17.6 30 189 280 120 See PLT4 120 0.030
• Working temperature: -25 °C +100 °C 39 7 38 30 25 379 700 100 See PLT1 110 0.050
• Optional seals: FKM, EPDM or more 50 8 51 40.6 25 757 1000 100 See PLT1 100 0.100
• Working pressure: 250-400 bar 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Connection under pressure: allowed
(male side only)
• Max residual pressure: 250 bar
• Norm: ISO 16028 (DN06→DN30)

• Kuppeln unter Druck: erlaubt (nur männliche seite)
• Max. Restdruck: 250 bar

• Connexion sous pression: possible
(seulement côté male)
• Pression restante max: 250 bar

PLK4
PLK4 DN06 - BG 1 - ISO 6.3
(g) (pcs.)
IG 1 67.5 BSP 1/4" DIN 3852-2-X See PLT4 DN06 PLK4.0606.113 142 100
67.5 NPT 1/4" ANSI B1.20.3 See PLT4 DN06 PLK4.0606.013 143 100
IG 2 67.5 9/16"-18 UNF 2B SAE J 1926-1 See PLT4 DN06 PLK4.0615.033 139 100
AG 5 79 12 BSP 1/4” DIN 3852-2-A See PLT4 DN06 PLK4.0606.713 156 100
PLK4 DN13 - BG2- ISO 10
(g) (pcs.)
IG 1 74 BSP 1/4" DIN 3852-2-X See PLT4 DN13 PLK4.1306.113 250 60
74 BSP 3/8" DIN 3852-2-X See PLT4 DN13 PLK4.1310.113 240 60
77.5 NPT 3/8" ANSI B1.20.3 See PLT4 DN13 PLK4.1310.013 256 60
74 BSP 1/2" DIN 3852-2-X See PLT4 DN13 PLK4.1313.113 226 60
78 NPT 1/2" ANSI B1.20.3 See PLT4 DN13 PLK4.1313.013 243 60
74 M16x1.5 ISO 6149-1 See PLT4 DN13 PLK4.1316.103 243 60
IG 2 75 9/16"-18 UNF 2B SAE J 1926-1 See PLT4 DN13 PLK4.1315.033 251 60
75 3/4"-16 UNF 2B SAE J 1926-1 See PLT4 DN13 PLK4.1319.033 235 60
75 M22x1.5 SAE J 2244/1 See PLT4 DN13 PLK4.1322.103 222 60
AG 5 75 13 BSP 1/2" BS B5200 See PLT4 DN13 PLK4.1313.703 211 60
THREADS
IG 1 IG 2 AG 5

PLK4
PLK4 DN20 - BG 3 - ISO 12.5
(g) (pcs.)
86 RC 1/2” UNI ISO 7/1 See PLT4 DN20 PLK4.2013.043 376 42
86.5 BSP 3/4" DIN 3852-2-X See PLT4 DN20 PLK4.2019.113 342 42
82.5 M18x1.5 ISO 6149-1 See PLT4 DN20 PLK4.2018.103 361 42
86 1"1/16-12 UN 2B SAE J 1926-1 See PLT4 DN20 PLK4.2027.033 336 42
AG 1 87.5 18.5 1”1/16-12 UN 2A SAE J 1926-3 See PLT4 DN20 PLK4.2027.333 329 42
AG 2 87.7 16.7 3/4”-16 UNF 2A SAE J 514 See PLT4 DN20 PLK4.2019.303 308 42
90.3 19.3 7/8”-14 UNF 2A SAE J 514 See PLT4 DN20 PLK4.2023.303 317 42
93 22 1"1/16-12 UN 2A SAE J 514 See PLT4 DN20 PLK4.2027.303 332 42
AG 5 90 16 BSP 3/4" DIN 3852-2-A See PLT4 DN20 PLK4.2019.713 333 42
AGS 2 108.6 37.6 3/4”-16 UNF 2A SAE J 514 See PLT4 DN20 PLK4.2019.503 347 42
112.1 41.1 7/8"-14 UNF 2A SAE J 514 See PLT4 DN20 PLK4.2023.503 352 42
116.4 45.4 1"1/16-12 UN 2A SAE J 514 See PLT4 DN20 PLK4.2027.503 384 42
AGS 4 109.5 38.5 1"-14 UNS 2A SAE J 1453 See PLT4 DN20 PLK4.2025.533 383 42
111 40 1”3/16-12 UN 2A SAE J 1453 See PLT4 DN20 PLK4.2030.533 427 42
THREADS
AGS 2 AGS 4

PLK4
PLK4 DN22 - BG 4A - ISO 16
(g) (pcs.)
89.5 BSP 3/4" DIN 3852-2-X See PLT4 DN22 PLK4.2219.113 378 42
85.5 M18x1.5 ISO 6149-1 See PLT4 DN22 PLK4.2218.103 397 42
AG 1 90.5 18.5 1”1/16-12 UN 2A SAE J 1926-3 See PLT4 DN22 PLK4.2227.333 365 42
AG 2 90.7 16.7 3/4”-16 UNF 2A SAE J 514 See PLT4 DN22 PLK4.2219.303 344 42
93.3 19.3 7/8”-14 UNF 2A SAE J 514 See PLT4 DN22 PLK4.2223.303 353 42
96 22 1"1/16-12 UN 2A SAE J 514 See PLT4 DN22 PLK4.2227.303 369 42
AG 5 93 16 BSP 3/4" DIN 3852-2-A See PLT4 DN22 PLK4.2219.713 369 42
AGS 2 111.6 37.6 3/4”-16 UNF 2A SAE J 514 See PLT4 DN22 PLK4.2219.503 383 42
115.1 41.1 7/8"-14 UNF 2A SAE J 514 See PLT4 DN22 PLK4.2223.503 388 42
119.4 45.4 1"1/16-12 UN 2A SAE J 514 See PLT4 DN22 PLK4.2227.503 420 42
AGS 4 112.5 38.5 1"-14 UNS 2A SAE J 1453 See PLT4 DN22 PLK4.2225.533 419 42
114 40 1”3/16-12 UN 2A SAE J 1453 See PLT4 DN22 PLK4.2230.533 463 42
THREADS
AGS 2 AGS 4

PLK4
PLK4 DN25 - BG 4 - ISO 19
(g) (pcs.)
IG 1 105 BSP 3/4" DIN 3852-2-X See PLT4 DN25 PLK4.2519.113 582 30
105 BSP 1" DIN 3852-2-X See PLT4 DN25 PLK4.2525.113 518 30
105 NPT 1" ANSI B1.20.3 See PLT4 DN25 PLK4.2525.013 531 30
IG 2 105 1"1/16-12 UN 2B SAE J 1926-1 See PLT4 DN25 PLK4.2527.033 576 30
AG 2 109.1 23.1 1”5/16-12 UN 2A SAE J 514 See PLT4 DN25 PLK4.2533.303 516 30
AGS 2 131.4 45.4 1”5/16-12 UN 2A SAE J 514 See PLT4 DN25 PLK4.2533.503 627 30
AG 5 107 18 BSP 1" DIN 3852-2-B See PLT4 DN25 PLK4.2525.213 525 30
103 17 BSP 1" BS B5200 See PLT4 DN25 PLK4.2525.703 502 30
105 16 BSP 3/4" DIN 3852-2-A See PLT4 DN25 PLK4.2519.713 500 30
107 18 BSP 1" DIN 3852-2-A See PLT4 DN25 PLK4.2525.713 526 30
(g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X See PLT4 DN30 PLK4.3025.113 1038 8
50 NPT 1" ANSI B1.20.3 See PLT4 DN30 PLK4.3025.013 1045 8
55 BSP 1"¼ DIN 3852-2-X See PLT4 DN30 PLK4.3031.113 1109 8
55 NPT 1"¼ ANSI B1.20.3 See PLT4 DN30 PLK4.3031.013 1123 8
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 See PLT4 DN30 PLK4.3033.033 1028 8
THREADS
IG 1 IG 2 AG 2 AG 5 AGS 2

PLK4

(g) (pcs.)
BSP 1"½ DIN 3852-2-X See PLT1 DN39 PLK4.3939.113 3350 9
NPT 1"½ ANSI B1.20.3 See PLT1 DN39 PLK4.3939.013 3190 9
(g) (pcs.)
IG 1 BSP 2" DIN 3852-2-X See PLT1 DN50 PLK4.5051.113 5400 6
NPT 2" ANSI B1.20.3 See PLT1 DN50 PLK4.5051.013 5430 6
1"½ SAE 3000 See PLT1 DN50 PLK4.5051.003 6040 6
IG 2 2"½-12 UN 2B SAE J 1926-1 See PLT1 DN50 PLK4.5063.033 5280 6
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PLK4
PLASTIC CAPS NOMINAL SIZE MALE DUST CAP COLOR MATERIAL

Dimensions Weight

06 1 6.3 SPLT.06003 26 200 20 13 PVC
13 2 10 SPLT.13003 27.5 200 26 15 PVC
20 3 12.5 SPLT.20003 35 200 31.5 26 PVC
25 4 19 SPLT.25003 43 265 35 41 PVC
30 5 25 SPLT.30003 51 270 50 60 PVC
METAL CAPS NOMINAL SIZE MALE DUST CAP MATERIAL

Dimensions Weight
06 1 6.3 SPLT.06203 25 200 32 28 Aluminum

13 2 10 SPLT.13203 30 200 32 39 Aluminum
20 3 12.5 SPLT.20203 32 200 32 40 Aluminum
22 4A 16 SPLT.22203 35 200 32 43 Aluminum
25 4 19 SPLT.25203 40 275 47.5 66 Aluminum
30 5 25 SPLT.30203 45 275 47.5 71 Aluminum
39 7 38 SPLT.39203 68 275 47.5 155 Aluminum
50 8 51 SPLK.50203 83 275 47.5 210 Aluminum

06 1 6.3 PLT.006.120 PLT.006.130 -

13 2 10 PLT.013.120 PLT.013.130 PLK.013.210
20 3 12.5 PLT.019.120 PLT.019.130 PVT.019.210
22 4A 16 PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PLT.031.120 PLT.031.130 PVT.030.210
39 7 38 PLK.039.120 PLK.039.130 -
50 8 51 PLK.050.120 PLK.050.130 -


PLS1
71 SERIES
FLAT FACE/STEEL
FLACHDICHTEND/STAHL
CLAPET PLAT/ACIER
• Intercambiabilità: Parker/Snap-Tite 71
• Guarnizioni opzionali: FKM, EPDM o altro Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
DNP BG ISO mm MPa* l/min l/min MPa MPa MPa cc

Technical data E
06 1 6.3 5.3 35 12 20 170 143 170 0.010
• Interchange: Parker/Snap-Tite 71 10 2 10 10.4 35 23 45 150 175 160 0.020
• Occlusion: flat face 13 3 12.5 13 35 45 60 140 155 210 0.030

• Locking: radial balls 20 4 19 17 35 106 150 160 130 170 0.060
• Material: steel 25 5 25 21.8 35 189 240 130 115 145 0.100
50 8 50 38 20 757 1000 65 65 80 0.150
• Standard seals: NBR 1 MPa = 145.04 psi • 1 l = 0.264 gal
*Dinamic pressure. For static pressure multiply by two
• Austauschbarkeit: Parker/Snap-Tite 71
• Interchangeabilité: Parker/Snap-Tite 71

PLS1
PLS1 DN06 - BG 1 - ISO 6.3

BSP 1/4" DIN 3852-2-X PLS1.0606.112 177 93 PLS1.0606.113 98 120

NPT 1/4" ANSI B1.20.3 PLS1.0606.012 177 93 PLS1.0606.013 98 120
PLS1 DN10 - BG 2 - ISO 10
L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE

61 BSP 3/8" DIN 3852-2-X PLS1.1010.112 378 35 PLS1.1010.113 158 60

64 NPT 3/8" ANSI B1.20.3 PLS1.1010.012 378 35 PLS1.1010.013 184 60
61 BSP 1/2" DIN 3852-2-X PLS1.1013.112 357 35 PLS1.1013.113 154 60
64 NPT 1/2" ANSI B1.20.3 PLS1.1013.012 359 35 PLS1.1013.013 168 60
PLS1 DN13 - BG 3 - ISO 12.5
THREADS L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
COD. F Weight (g) Packaging COD. M Weight (g) Packaging (pcs.)
(pcs.)
IG 1 72.5 BSP 1/2" DIN 3852-2-X PLS1.1313.112 624 23 PLS1.1313.113 339 35
74 NPT 1/2" ANSI B1.20.3 PLS1.1313.012 627 23 PLS1.1313.013 352 35
IG 2 70 3/4"-16 UNF 2B SAE J 1926-1 PLS1.1319.032 630 23 PLS1.1319.033 331 35
THREADS
IG 1 IG 2

PLS1
(pcs.)
IG 1 BSP 3/4" DIN 3852-2-X PLS1.2019.112 954 15 PLS1.2019.113 560 28
NPT 3/4" ANSI B1.20.3 PLS1.2019.012 960 15 PLS1.2019.013 567 28
IG 2 1"1/16-12 UN 2B SAE J 1926-1 PLS1.2027.032 945 15 PLS1.2027.033 554 28
THREADS CH3 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
IG 1 50 97 BSP 1" DIN 3852-2-X PLS1.2525.112 1400 11 PLS1.2525.113 833 20

50 97 NPT 1" ANSI B1.20.3 PLS1.2525.012 1422 11 PLS1.2525.013 840 20
55 97 BSP 1"¼ DIN 3852-2-X PLS1.2531.112 1300 11 PLS1.2531.113 904 20
55 99 NPT 1"¼ ANSI B1.20.3 PLS1.2531.012 1320 11 PLS1.2531.013 918 20
IG 2 50 97 1"5/16-12 UN 2B SAE J 1926-1 PLS1.2533.032 1364 11 PLS1.2533.033 822 20
55 97 1"5/8-12 UN 2B SAE J 1926-1 PLS1.2541.032 1267 11 PLS1.2541.033 867 20

NPT 1"½ DIN 3852-2-X PLS1.5039.112 5660 4 PLS1.5039.113 2070 8

BSP 1"½ ANSI B1.20.3 PLS1.5039.012 5680 4 PLS1.5039.013 2090 8
BSP 2" DIN 3852-2-X PLS1.5051.112 5430 4 PLS1.5051.113 1850 8
NPT 2" ANSI B1.20.3 PLS1.5051.012 5450 4 PLS1.5051.013 1870 8
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PLS1

06 1 6.3 SPLS.06002* 38 260 26 35 SPLS.06003* 28 260 26 25 PVC
10 2 10 SPLS.10002* 50 315 35 57 SPLS.10003* 32 315 35 30 PVC
13 3 12.5 SPLS.13002* 59 300 42 78 SPLS.13003* 42 300 42 43 PVC
20 4 19 SPLS.20002* 70 430 55 108 SPLS.20003* 50 430 55 58 PVC
25 5 25 SPLS.25002 79 390 60 130 SPLS.25003 56 390 60 68 PVC
50 8 50 SPLS.50002 120 315 100 230 SPLS.50003 85 360 80 220 PVC
DEL CLIENTE
*DISPONIBLES SUR
DEMANDE

06 1 6.3 SPLS.06202* 35 260 26 35 SPLS.06203* 25 260 26 28 Aluminum
10 2 10 SPLS.10202* 50 315 35 106 SPLS.10203* 30 315 35 43 Aluminum
DEL CLIENTE
*DISPONIBLES SUR
DEMANDE

* AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER EPDM O ‘V’ PER
DNP BG ISO OR (NBR*) BK (PTFE) VITON
06 1 6.3 PLT.304.030 PLS.006.130
*ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER EPDM ODER ‘V’
10 2 10 PLS.010.120 PLS.010.130 FUER VITON AN
13 3 12.5 PLT.025.120 PLS.013.130 *AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU ‘V’ POUR VITON
20 4 19 PVT.019.122 PLS.019.130
25 5 25 PLS.025.120 PLS.025.130
50 8 50 PVT.030.121 PLS.050.130
NOMINAL SIZE FEMALE GASKET FEMALE GASKET

DNP BG ISO OR1 (NBR*) BK1 (PTFE) OR2 (NBR*) BK2 (PTFE)
06 1 6.3 PLS.006.210 PLS.006.132 PLS.006.121 PLS.006.131

10 2 10 PLS.010.210 PLS.010.132 PVS.306.030 PLS.010.131
13 3 12.5 PBV.004.120 PLS.013.132 PBV.006.120 PLS.013.131
20 4 19 VVT.013.120 PLS.019.132 PLK.025.121 PLS.019.131
25 5 25 PLS.025.210 PLS.025.132 PVT.019.122 PLS.025.131

PLSX
71 SERIES
VALVOLA PIANA/ACCIAIO INOX

FLAT FACE/ STAINLESS STEEL
FLACHDICHTEND/ EDELSTAHL
CLAPET PLAT/ ACIER INOX
• Guarnizioni opzionali: FFKM, EPDM o altro
• Pressioni di esercizio: 200-350 bar Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size

Technical data E
06 1 6.3 5.3 35 12 20 197 170 215 0.010
• Interchange: Parker/Snap-Tite 71 10 2 10 10.4 35 23 45 140 130 200 0.020

• Locking: radial balls 20 4 19 17 35 106 150 110 128 170 0.060
• Material: stainless steel AISI 316 25 5 25 21.8 35 189 240 100 115 145 0.100
50 8 50 38 20 757 1000 65 65 80 0.150
• Standard seals: FKM
• Optional seals: FFKM, EPDM or more * Dinamic pressure. For static pressure multiply by two

• Dichtungen nach Wahl: FFKM, EPDM, usw.
• Matériel: acier inox AISI 316
• Joints facultatifs: FFKM, EPDM, ect.

PLSX
PLSX DN06 - BG 1 - ISO 6.3

COD. F Weight (g) Packaging (pcs.) COD. M Weight (g) Packaging
(pcs.)
BSP 1/4" DIN 3852-2-X PLSX.0606.112 179 93 PLSX.0606.113 122 120
NPT 1/4" ANSI B1.20.3 PLSX.0606.012 180 93 PLSX.0606.013 123 120
PLSX DN10 - BG 2 - ISO 10

70 BSP 3/8" DIN 3852-2-X PLSX.1010.112 390 35 PLSX.1010.113 217 60

70 NPT 3/8" ANSI B1.20.3 PLSX.1010.012 390 35 PLSX.1010.013 220 60
69.5 BSP 1/2" DIN 3852-2-X PLSX.1013.112 369 35 PLSX.1013.113 201 60
73.5 NPT 1/2" ANSI B1.20.3 PLSX.1013.012 371 35 PLSX.1013.013 216 60
PLSX DN13 - BG 3 - ISO 12.5

COD. F Weight (g) Packaging COD. M Weight Packaging (pcs.)
(pcs.) (g)

PLSX

(pcs.)
CH3 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
50 107 BSP 1" DIN 3852-2-X PLSX.2525.112 1420 11 PLSX.2525.113 979 20

50 107 NPT 1" ANSI B1.20.3 PLSX.2525.012 1440 11 PLSX.2525.013 990 20
55 107 BSP 1"¼ DIN 3852-2-X PLSX.2531.112 1321 11 PLSX.2531.113 1059 20
55 109 NPT 1"¼ ANSI B1.20.3 PLSX.2531.012 1336 11 PLSX.2531.013 1096 20

(pcs.)
BSP 1”½ DIN 3852-2-X PLSX.5039.112 5660 4 PLSX.5939.113 2070 8
NPT 1”½ ANSI B1.20.3 PLSX.5039.012 5680 4 PLSX.5039.013 2090 8
BSP 2” DIN 3852-2-X PLSX.5051.112 5430 4 PLSX.5051.113 1850 8
NPT 2” ANSI B1.20.3 PLSX.5051.012 5450 4 PLSX.5051.013 1870 8

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PLSX

06 1 6.3 SPLS.06002* 38 260 26 35 SPLS.06003* 28 260 26 25 PVC
10 2 10 SPLS.10002* 50 315 35 57 SPLS.10003* 32 315 35 30 PVC
13 3 12.5 SPLS.13002* 59 300 42 78 SPLS.13003* 42 300 42 43 PVC
20 4 19 SPLS.20002* 70 430 55 108 SPLS.20003* 50 430 55 58 PVC
25 5 25 SPLS.25002 79 390 60 130 SPLS.25003 56 390 60 68 PVC
50 8 50 SPLS.50002 120 315 100 230 SPLS.50003 85 360 80 220 PVC
DEL CLIENTE
*DISPONIBLES SUR
DEMANDE

DEL CLIENTE
*DISPONIBLES SUR
DEMANDE

06 1 6.3 PLT.304.030 V PLS.006.130

10 2 10 PLS.010.120 V PLS.010.130
13 3 12.5 PLT.025.120 V PLS.013.130
20 4 19 PVT.019.122 V PLS.019.130
25 5 25 PLS.025.120 V PLS.025.130
50 8 50 PVT.030.121 V PLS.050.130
NOMINAL SIZE FEMALE GASKET FEMALE GASKET

DNP BG ISO OR1 (FKM) BK1 (PTFE) OR2 (FKM) BK2 (PTFE)
06 1 6.3 PLS.006.210 V PLS.006.132 PLS.006.121 V PLS.006.131

10 2 10 PLS.010.210 V PLS.010.132 PVS.306.030 V PLS.010.131
13 3 12.5 PBV.004.120 V PLS.013.132 PBV.006.120 V PLS.013.131
20 4 19 VVT.013.120 V PLS.019.132 PLK.025.121 V PLS.019.131
25 5 25 PLS.025.210 V PLS.025.132 PVT.019.122 V PLS.025.131

PVT4
FLAT FACE/SCREW
VITE VALVOLA PIANA/ACCIAIO COLOR

FLAT FACE SCREW COUPLINGS/STEEL
CODE
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL
COUPLEURS FACE PLANE À VISSER/ACIER
• Intercambiabilità: disegno esclusivo Dnp

• Aggancio: a vite
Max working
• Connessione in pressione:
flow rate
pressure
Coupled
spillage
Female
consentita (lato maschio o lato femmina)
Rated
Fluid
Male
flow
Max
Nominal size

Technical data E
06 1 6.3 6 40 12 24 190 190 190 0.008
• Interchange: exclusive Dnp profile 13 2 10 8.6 35 23 46 140 170 140 0.010
20 3 12.5 10.7 35 45 90 140 160 140 0.012
• Locking: screw
22 4A 16 12.8 35 74 150 130 130 130 0.015
• Material: steel
• Threads: BSP - NPT - SAE - METRIC 30 5 25 17.6 35 189 280 130 130 130 0.030
• Standard seals: NBR and PU 35 6 31.5 26 35 288 480 140 130 140 0.040
39 7 40 30 30 379 700 130 120 130 0.050
• Working pressure: 300-400 bar 50 8 50 40.6 30 757 1000 150 120 140 0.100
• Connection under pressure: allowed 1 MPa = 145.04 psi • 1 l = 0.264 gal
(both male or female side)
• Austauschbarkeit: laut exclusive Dnp Zeichnung

• Kupplung: Schraubweise
• Kuppeln unter Druck: erlaubt
(Steckerseite oder Muffeseite)
• Interchangeabilité: projet exclusif Dnp

• Accrochage: a vissé
(côté male ou femelle)

PVT4
PVT4 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/4" DIN 3852-2-X PVT4.0606.112 166 55 PVT4.0606.113 198 60
NPT 1/4" ANSI B1.20.3 PVT4.0606.012 167 55 PVT4.0606.013 199 60
IG 2 9/16"-18 UNF 2B SAE J 1926-1 PVT4.0615.032 163 55 PVT4.0615.033 196 60
PVT4 DN13 - BG 2 - ISO 10 (T)
(g) (pcs.) (g) (pcs.)
IG 1 73.5 75 BSP 3/8" DIN 3852-2-X PVT4.1310.112 315 45 PVT4.1310.113 291 40
73.5 78 NPT 3/8" ANSI B1.20.3 PVT4.1310.012 317 45 PVT4.1310.013 317 40
73.5 75 BSP 1/2" DIN 3852-2-X PVT4.1313.112 300 45 PVT4.1313.113 287 40
73.5 78 NPT 1/2" ANSI B1.20.3 PVT4.1313.012 303 45 PVT4.1313.013 301 40
73.5 75 M14x1.5 ISO 6149-1 PVT4.1314.102 301 45 PVT4.1314.103 299 40
73.5 75 M16x1.5 ISO 6149-1 PVT4.1316.102 318 45 PVT4.1316.103 294 40
73.5 75 M18x1.5 ISO 6149-1 PVT4.1318.102 311 45 PVT4.1318.103 287 40
73.5 75 M20x1.5 ISO 6149-1 PVT4.1320.102 315 45 PVT4.1320.103 291 40
IG 2 72 75 9/16"-18 UNF 2B SAE J 1926-1 PVT4.1315.032 315 45 PVT4.1315.033 298 40
73.5 75 3/4"-16 UNF 2B SAE J 1926-1 PVT4.1319.032 307 45 PVT4.1319.033 293 40
74.5 79 7/8"-14 UNF 2B SAE J 1926-1 PVT4.1323.032 293 45 PVT4.1323.033 292 40
74.5 78 M22x1.5 SAE J 2244/1 PVT4.1322.102 299 45 PVT4.1322.103 295 40
AG 1 73.5 75 13 M14x1.5 ISO 6149-2 PVT4.1314.222 287 45 PVT4.1314.223 267 40
75 78 16 M20x1.5 ISO 6149-2 PVT4.1320.222 297 45 PVT4.1320.223 277 40
AG 2 77.1 76.5 14.1 9/16"-18 UNF 2A SAE J 514 PVT4.1315.302 289 45 PVT4.1315.303 259 40
79.7 78.7 16.7 3/4"-16 UNF 2A SAE J 514 PVT4.1319.302 297 45 PVT4.1319.303 267 40
AGS 2 100.6 99.6 37.6 3/4"-16 UNF 2A SAE J 514 PVT4.1319.502 321 45 PVT4.1319.503 295 40
104.1 103.1 41.1 7/8"-14 UNF 2A SAE J 514 PVT4.1323.502 330 45 PVT4.1323.503 310 40
AG 5 74 76.6 12 BSP 3/8" DIN 3852-2-B PVT4.1310.212 299 45 PVT4.1310.213 269 40
75 79 13 BSP 1/2" DIN 3852-2-B PVT4.1313.212 309 45 PVT4.1313.213 277 40
75 75 13 BSP 1/2" BS B5200 PVT4.1313.702 289 45 PVT4.1313.703 269 40
73 73 11 M16x1.5 DIN 3863-U PVT4.1316.702 289 45 PVT4.1316.703 261 40
78 78 16 M20x1.5 DIN 3863-U PVT4.1320.702 293 45 PVT4.1320.703 273 40
76 76 14 M22x1.5 DIN 3863-U PVT4.1322.702 291 45 PVT4.1322.703 271 40
THREADS
IG 1 IG 2 AG 1 AG 2 AG 5 AGS 2

PVT4
PVT4 DN13 - BG 2 - ISO 10 (E)
(g) (pcs.) (g) (pcs.)
IG 1 73.5 75 BSP 3/8" DIN 3852-2-X PVT4.1310.112 315 45 PVT4.1310.113 E 340 40
73.5 78 NPT 3/8" ANSI B1.20.3 PVT4.1310.012 317 45 PVT4.1310.013 E 366 40
73.5 75 BSP 1/2" DIN 3852-2-X PVT4.1313.112 300 45 PVT4.1313.113 E 336 40
73.5 75 M14x1.5 ISO 6149-1 PVT4.1314.102 301 45 PVT4.1314.103 E 348 40
73.5 75 M16x1.5 ISO 6149-1 PVT4.1316.102 318 45 PVT4.1316.103 E 343 40
73.5 75 M18x1.5 ISO 6149-1 PVT4.1318.102 311 45 PVT4.1318.103 E 336 40
73.5 75 M20x1.5 ISO 6149-1 PVT4.1320.102 315 45 PVT4.1320.103 E 340 40
IG 2 72 75 9/16"-18 UNF 2B SAE J 1926-1 PVT4.1315.032 315 45 PVT4.1315.033 E 347 40
73.5 75 3/4"-16 UNF 2B SAE J 1926-1 PVT4.1319.032 307 45 PVT4.1319.033 E 342 40
74.5 75 M22x1.5 SAE J 2244/1 PVT4.1322.102 299 45 PVT4.1322.103 E 344 40
AG 1 73.5 75 13 M14x1.5 ISO 6149-2 PVT4.1314.222 287 45 PVT4.1314.223 E 316 40
75 78 16 M20x1.5 ISO 6149-2 PVT4.1320.222 297 45 PVT4.1320.223 E 326 40
AG 2 77.1 76.5 14.1 9/16"-18 UNF 2A SAE J 514 PVT4.1315.302 289 45 PVT4.1315.303 E 308 40
79.7 78.7 16.7 3/4"-16 UNF 2A SAE J 514 PVT4.1319.302 297 45 PVT4.1319.303 E 316 40
AGS 2 100.6 99.6 37.6 3/4"-16 UNF 2A SAE J 514 PVT4.1319.502 321 45 PVT4.1319.503 E 344 40
AG 5 74 76.6 12 BSP 3/8" DIN 3852-2-B PVT4.1310.212 299 45 PVT4.1310.213 E 318 40
75 79 13 BSP 1/2" DIN 3852-2-B PVT4.1313.212 309 45 PVT4.1313.213 E 326 40
75 75 13 BSP 1/2" BS B5200 PVT4.1313.702 289 45 PVT4.1313.703 E 318 40
73 73 11 M16x1.5 DIN 3863-U PVT4.1316.702 289 45 PVT4.1316.703 E 310 40
78 78 16 M20x1.5 DIN 3863-U PVT4.1320.702 293 45 PVT4.1320.703 E 322 40
76 76 14 M22x1.5 DIN 3863-U PVT4.1322.702 291 45 PVT4.1322.703 E 320 40
THREADS

PVT4
PVT4 DN20 - BG 3 - ISO 12.5 (T)
(g) (pcs.) (g) (pcs.)
IG 1 83.5 84.5 BSP 1/2" DIN 3852-2-X PVT4.2013.112 537 30 PVT4.2013.113 493 30
83.5 86 NPT 1/2" ANSI B1.20.3 PVT4.2013.012 540 30 PVT4.2013.013 506 30
83.5 86.5 BSP 3/4" DIN 3852-2-X PVT4.2019.112 506 30 PVT4.2019.113 473 30
83.5 86 NPT 3/4" ANSI B1.20.3 PVT4.2019.012 514 30 PVT4.2019.013 478 30
82.5 82.5 M18x1.5 ISO 6149-1 PVT4.2018.102 542 30 PVT4.2018.103 492 30
82.5 82 M22x1.5 ISO 6149-1 PVT4.2022.102 525 30 PVT4.2022.103 475 30
83.5 86 M26x1.5 ISO 6149-1 PVT4.2026.102 504 30 PVT4.2026.103 472 30
83.5 86 M30x1.5 ISO 6149-1 PVT4.2030.102 477 30 PVT4.2030.103 445 30
IG 2 79.5 82 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2019.032 515 30 PVT4.2019.033 485 30
81.5 86 7/8"-14 UNF 2B SAE J 1926-1 PVT4.2023.032 520 30 PVT4.2023.033 497 30
83.5 86 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2027.032 500 30 PVT4.2027.033 467 30
AG 2 87.2 87.7 16.7 3/4”-16 UNF 2A SAE J 514 PVT4.2019.302 463 30 PVT4.2019.303 439 30
89.8 90.3 19.3 7/8”-14 UNF 2A SAE J 514 PVT4.2023.302 473 30 PVT4.2023.303 448 30
92.5 93 22 1"1/16-12 UN 2A SAE J 514 PVT4.2027.302 482 30 PVT4.2027.303 463 30
AGS 2 108.1 108.6 37.6 3/4”-16 UNF 2A SAE J 514 PVT4.2019.502 502 30 PVT4.2019.503 478 30
111.6 112.1 41.1 7/8"-14 UNF 2A SAE J 514 PVT4.2023.502 518 30 PVT4.2023.503 482 30
115.9 116.4 45.4 1"1/16-12 UN 2A SAE J 514 PVT4.2027.502 552 30 PVT4.2027.503 515 30
AG 5 89.5 90 16 BSP 3/4" DIN 3852-2-A PVT4.2019.712 500 30 PVT4.2019.713 464 30
AGS 4 109 109.5 38.5 1"-14 UNS 2A SAE J 1453 PVT4.2025.532 547 30 PVT4.2025.533 514 30
110.5 111 40 1”3/16-12 UN 2A SAE J 1453 PVT4.2030.532 589 30 PVT4.2030.533 558 30
IG 1 IG 2 AG 2 AG 5
THREADS
AGS 2 AGS 4

PVT4
PVT4 DN20 - BG 3 - ISO 12.5 (E)
(g) (pcs.) (g) (pcs.)
IG 1 83.5 84.5 BSP 1/2" DIN 3852-2-X PVT4.2013.112 537 30 PVT4.2013.113 E 503 30
83.5 86.5 BSP 3/4" DIN 3852-2-X PVT4.2019.112 506 30 PVT4.2019.113 E 483 30
82.5 82.5 M18x1.5 ISO 6149-1 PVT4.2018.102 542 30 PVT4.2018.103 E 502 30
82.5 82 M22x1.5 ISO 6149-1 PVT4.2022.102 525 30 PVT4.2022.103 E 485 30
83.5 86 M26x1.5 ISO 6149-1 PVT4.2026.102 504 30 PVT4.2026.103 E 482 30
83.5 86 M30x1.5 ISO 6149-1 PVT4.2030.102 477 30 PVT4.2030.103 E 455 30
IG 2 79.5 82 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2019.032 515 30 PVT4.2019.033 E 495 30
83.5 86 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2027.032 500 30 PVT4.2027.033 E 477 30
AG 2 87.2 87.7 16.7 3/4”-16 UNF 2A SAE J 514 PVT4.2019.302 463 30 PVT4.2019.303 E 449 30
89.8 90.3 19.3 7/8”-14 UNF 2A SAE J 514 PVT4.2023.302 473 30 PVT4.2023.303 E 458 30
92.5 93 22 1"1/16-12 UN 2A SAE J 514 PVT4.2027.302 482 30 PVT4.2027.303 E 474 30
AGS 2 108.1 108.6 37.6 3/4”-16 UNF 2A SAE J 514 PVT4.2019.502 502 30 PVT4.2019.503 E 488 30
115.9 116.4 45.4 1"1/16-12 UN 2A SAE J 514 PVT4.2027.502 552 30 PVT4.2027.503 E 525 30
AG 5 89.5 90 16 BSP 3/4" DIN 3852-2-A PVT4.2019.712 500 30 PVT4.2019.713 E 474 30
AGS 4 109 109.5 38.5 1"-14 UNS 2A SAE J 1453 PVT4.2025.532 547 30 PVT4.2025.533 E 524 30
110.5 111 40 1”3/16-12 UN 2A SAE J 1453 PVT4.2030.532 589 30 PVT4.2030.533 E 568 30
IG 1 IG 2 AG 2 AG 5
THREADS
AGS 2 AGS 4

PVT4
PVT4 DN22 - BG 4A - ISO 16 (T)
(g) (pcs.) (g) (pcs.)
IG 1 86 87.5 BSP 1/2" DIN 3852-2-X PVT4.2213.112 528 30 PVT4.2213.113 502 30
86 89 NPT 1/2" ANSI B1.20.3 PVT4.2213.012 531 30 PVT4.2213.013 515 30
86 89.5 BSP 3/4" DIN 3852-2-X PVT4.2219.112 497 30 PVT4.2219.113 482 30
86 89 NPT 3/4" ANSI B1.20.3 PVT4.2219.012 505 30 PVT4.2219.013 488 30
85 85.5 M18x1.5 ISO 6149-1 PVT4.2218.102 533 30 PVT4.2218.103 501 30
85 85 M22x1.5 ISO 6149-1 PVT4.2222.102 516 30 PVT4.2222.103 484 30
86 89 M26x1.5 ISO 6149-1 PVT4.2226.102 495 30 PVT4.2226.103 481 30
86 89 M30x1.5 ISO 6149-1 PVT4.2230.102 469 30 PVT4.2230.103 455 30
IG 2 82 85 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2219.032 506 30 PVT4.2219.033 494 30
84 89 7/8"-14 UNF 2B SAE J 1926-1 PVT4.2223.032 511 30 PVT4.2223.033 506 30
86 89 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2227.032 491 30 PVT4.2227.033 477 30
AG 2 89.7 90.7 16.7 3/4”-16 UNF 2A SAE J 514 PVT4.2219.302 454 30 PVT4.2219.303 449 30
92.3 93.3 19.3 7/8”-14 UNF 2A SAE J 514 PVT4.2223.302 464 30 PVT4.2223.303 457 30
95 96 22 1"1/16-12 UN 2A SAE J 514 PVT4.2227.302 473 30 PVT4.2227.303 473 30
AGS 2 110.6 111.6 37.6 3/4”-16 UNF 2A SAE J 514 PVT4.2219.502 493 30 PVT4.2219.503 488 30
114.1 115.1 41.1 7/8"-14 UNF 2A SAE J 514 PVT4.2223.502 509 30 PVT4.2223.503 492 30
118.4 119.4 45.4 1"1/16-12 UN 2A SAE J 514 PVT4.2227.502 543 30 PVT4.2227.503 525 30
AG 5 92 93 16 BSP 3/4" DIN 3852-2-A PVT4.2219.712 492 30 PVT4.2219.713 474 30
AGS 4 111.5 112.5 38.5 1"-14 UNS 2A SAE J 1453 PVT4.2225.532 538 30 PVT4.2225.533 524 30
113 114 40 1”3/16-12 UN 2A SAE J 1453 PVT4.2230.532 580 30 PVT4.2230.533 567 30
IG 1 IG 2 AG 2 AG 5
THREADS
AGS 2 AGS 4

PVT4
PVT4 DN22 - BG 4A - ISO 16 (E)
(g) (pcs.) (g) (pcs.)
IG 1 86 87.5 BSP 1/2" DIN 3852-2-X PVT4.2213.112 528 30 PVT4.2213.113 E 520 30
86 89 NPT 1/2" ANSI B1.20.3 PVT4.2213.012 531 30 PVT4.2213.013 E 533 30
86 89.5 BSP 3/4" DIN 3852-2-X PVT4.2219.112 497 30 PVT4.2219.113 E 500 30
86 89 NPT 3/4" ANSI B1.20.3 PVT4.2219.012 505 30 PVT4.2219.013 E 506 30
85 85.5 M18x1.5 ISO 6149-1 PVT4.2218.102 533 30 PVT4.2218.103 E 519 30
85 85 M22x1.5 ISO 6149-1 PVT4.2222.102 516 30 PVT4.2222.103 E 502 30
86 89 M26x1.5 ISO 6149-1 PVT4.2226.102 495 30 PVT4.2226.103 E 499 30
86 89 M30x1.5 ISO 6149-1 PVT4.2230.102 469 30 PVT4.2230.103 E 473 30
IG 2 82 85 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2219.032 506 30 PVT4.2219.033 E 512 30
84 89 7/8"-14 UNF 2B SAE J 1926-1 PVT4.2223.032 511 30 PVT4.2223.033 E 525 30
86 89 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2227.032 491 30 PVT4.2227.033 E 495 30
AG 2 89.7 90.7 16.7 3/4”-16 UNF 2A SAE J 514 PVT4.2219.302 454 30 PVT4.2219.303 E 467 30
92.3 93.3 19.3 7/8”-14 UNF 2A SAE J 514 PVT4.2223.302 464 30 PVT4.2223.303 E 476 30
95 96 22 1"1/16-12 UN 2A SAE J 514 PVT4.2227.302 473 30 PVT4.2227.303 E 491 30
AGS 2 110.6 111.6 37.6 3/4”-16 UNF 2A SAE J 514 PVT4.2219.502 493 30 PVT4.2219.503 E 506 30
118.4 119.4 45.4 1"1/16-12 UN 2A SAE J 514 PVT4.2227.502 543 30 PVT4.2227.503 E 543 30
AG 5 92 93 16 BSP 3/4" DIN 3852-2-A PVT4.2219.712 492 30 PVT4.2219.713 E 492 30
AGS 4 111.5 112.5 38.5 1"-14 UNS 2A SAE J 1453 PVT4.2225.532 538 30 PVT4.2225.533 E 542 30
113 114 40 1”3/16-12 UN 2A SAE J 1453 PVT4.2230.532 580 30 PVT4.2230.533 E 586 30
IG 1 IG 2 AG 2 AG 5
THREADS
AGS 2 AGS 4

PVT4
PVT4 DN25 - BG 4 - ISO 19 (T)
(g) (pcs.) (g) (pcs.)
IG 1 94.5 105 BSP 3/4" DIN 3852-2-X PVT4.2519.112 740 23 PVT4.2519.113 751 24
94.5 105 NPT 3/4" ANSI B1.20.3 PVT4.2519.012 745 23 PVT4.2519.013 758 24
97.5 105 BSP 1" DIN 3852-2-X PVT4.2525.112 711 23 PVT4.2525.113 688 24
97.5 105 NPT 1" ANSI B1.20.3 PVT4.2525.012 717 23 PVT4.2525.013 700 24
97.5 105 M30x1.5 ISO 6149-1 PVT4.2530.102 741 23 PVT4.2530.103 724 24
IG 2 95 105 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2527.032 748 23 PVT4.2527.033 745 24
95 105 1"5/16-12 UN 2B SAE J 1926-1 PVT4.2533.032 689 23 PVT4.2533.033 687 24
AG 2 97.1 109.1 23.1 1”5/16-12 UN 2A SAE J 514 PVT4.2533.302 754 23 PVT4.2533.303 686 24
AGS 2 119.4 131.4 45.4 1”5/16-12 UN 2A SAE J 514 PVT4.2533.502 812 23 PVT4.2533.503 783 24
AG 5 95 107 18 BSP 1" DIN 3852-2-B PVT4.2525.212 750 23 PVT4.2525.213 694 24
95 103 17 BSP 1" BS B5200 PVT4.2525.702 673 23 PVT4.2525.703 671 24
95 105 16 BSP 3/4" DIN 3852-2-A PVT4.2519.712 729 23 PVT4.2519.713 670 24
97 107 18 BSP 1" DIN 3852-2-A PVT4.2525.712 697 23 PVT4.2525.713 696 24
PVT4 DN25 - BG 4 - ISO 19 (E)
(g) (pcs.) (g) (pcs.)
IG 1 94.5 105 BSP 3/4" DIN 3852-2-X PVT4.2519.112 740 23 PVT4.2519.113 E 859 20
97.5 105 BSP 1" DIN 3852-2-X PVT4.2525.112 711 23 PVT4.2525.113 E 782 20
97.5 105 NPT 1" ANSI B1.20.3 PVT4.2525.012 717 23 PVT4.2525.013 E 808 20
97.5 105 M30x1.5 ISO 6149-1 PVT4.2530.102 741 23 PVT4.2530.103 E 832 20
IG 2 95 105 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2527.032 748 23 PVT4.2527.033 E 853 20
95 105 1"5/16-12 UN 2B SAE J 1926-1 PVT4.2533.032 689 23 PVT4.2533.033 E 794 20
AG 2 97.1 109.1 23.1 1”5/16-12 UN 2A SAE J 514 PVT4.2533.302 754 23 PVT4.2533.303 E 780 20
AGS 2 119.4 131.4 45.4 1”5/16-12 UN 2A SAE J 514 PVT4.2533.502 812 23 PVT4.2533.503 E 891 20
AG 5 95 107 18 BSP 1" DIN 3852-2-B PVT4.2525.212 750 23 PVT4.2525.213 E 802 20
95 103 17 BSP 1" BS B5200 PVT4.2525.702 673 23 PVT4.2525.703 E 779 20
95 105 16 BSP 3/4" DIN 3852-2-A PVT4.2519.712 729 23 PVT4.2519.713 E 777 20
97 107 18 BSP 1" DIN 3852-2-A PVT4.2525.712 697 23 PVT4.2525.713 E 803 20
THREADS
IG 1 IG 2 AG 2 AG 5 AGS 2

PVT4
PVT4 DN30 - BG 5 - ISO 25
THREADS CH2 CH3 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 50 50 120 BSP 1" DIN 3852-2-X PVT4.3025.112 1241 15 PVT4.3025.113 1362 12
50 50 120 NPT 1" ANSI B1.20.3 PVT4.3025.012 1256 15 PVT4.3025.013 1368 12
55 55 120 BSP 1"¼ DIN 3852-2-X PVT4.3031.112 1248 15 PVT4.3031.113 1432 12
55 55 122 NPT 1"¼ ANSI B1.20.3 PVT4.3031.012 1265 15 PVT4.3031.013 1446 12
IG 2 50 50 120 1"5/16-12 UN 2B SAE J 1926-1 PVT4.3033.032 1241 15 PVT4.3033.033 1351 12
55 55 120 1"5/8-12 UN 2B SAE J 1926-1 PVT4.3041.032 1246 15 PVT4.3041.033 1434 12
PVT4 DN35 - BG 6 - ISO 31.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PVT4.3531.112 2305 8 PVT4.3531.113 2889 7
NPT 1"¼ ANSI B1.20.3 PVT4.3531.012 2320 8 PVT4.3531.013 2906 7
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PVT4.3541.032 2305 8 PVT4.3541.033 2895 7
THREADS
IG 1 IG 2

PVT4
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"½ DIN 3852-2-X PVT4.3939.112 3840 3 PVT4.3939.113 3760 5
NPT 1"½ ANSI B1.20.3 PVT4.3939.012 3855 3 PVT4.3939.013 3790 5
1"7/8-12 UN 2B SAE J 1926-1 PVT4.3947.032 3830 3 PVT4.3947.033 3750 5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 2" DIN 3852-2-X PVT4.5051.112 6890 3 PVT4.5051.113 6450 4
NPT 2" ANSI B1.20.3 PVT4.5051.012 6920 3 PVT4.5051.013 6480 4
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVT4
06 1 6.3 SPVT.06002 32 220 32 27 SPVT.06003 32 220 32 29 PVC

13 2 10 SPVT.13002 38 220 32 38 SPVT.13003 36 220 32 36 PVC
20 3 12.5 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
22 4A 16 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC
30 5 25 SPVT.30002 60 438 47.5 94 SPVT.30003 60 438 47.5 91 PVC
06 1 6.3 SPVT.06202 30 205 27 30 SPVT.06203 32 205 27 38 Aluminum

13 2 10 SPVT.13202 36 205 32 46 SPVT.13203 36 205 32 53 Aluminum
20 3 12.5 SPVV.13202 41.5 205 32 57 SPVV.13203 41.5 205 32 66 Aluminum
22 4A 16 SPVV.13202 41.5 205 32 57 SPVV.13203 41.5 205 32 66 Aluminum
25 4 19 SPVT.25202 49.5 275 47.5 84 SPVT.25203 48 275 47.5 115 Aluminum
35 6 31.5 SPVT.35202 79.5 275 47.5 179 SPVT.35203 87 275 47.5 353 Aluminum
39 7 40 SPVT.39202 90 275 47.5 269 SPVT.39203 90 275 47.5 380 Aluminum
SPARE PARTS NOMINAL SIZE FEMALE GASKET MALE GASKET MALE GASKET
DNP BG ISO OR-E (SILICONE) OR (NBR) BK (PTFE) PU (POLYURETHANE)
06 1 6.3 PLK.025.121 S PLT.006.120 PLT.006.130 -

13 2 10 PLT.319.031 S PLT.013.120 PLT.013.130 PLK.013.210
20 3 12.5 PVT.019.121 S PLT.019.120 PLT.019.130 PVT.019.210
22 4A 16 PVT.019.121 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PVT.025.121 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PVT.030.121 S PLT.031.120 PLT.031.130 PVT.030.210
35 6 31.5 PVT.035.121 S PLS.025.120 PLT.035.130 -
39 7 40 PVT.039.121 S PLT.039.120 PLT.039.130 -
50 8 50 PVT.050.121 S PLK.050.120 PLK.050.130 -

PVT4 CS
FLAT FACE/SCREW
COLOR
VITE VALVOLA PIANA/SICURA
FLAT FACE SCREW COUPLINGS/PIN LOCK
CODE
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/SPLINT
COUPLEURS FACE PLANE À VISSER/GOUPILLE

• Aggancio: a vite con sicura
Min burst pressure
(lato maschio o lato femmina)
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: exclusive Dnp profile
13 2 10 8.6 35 23 46 140 170 140 0.010
• Locking: screw with pin lock 20 3 12.5 10.7 35 45 90 140 160 140 0.012
• Material: steel 22 4A 16 12.8 35 74 150 130 130 130 0.015
• Threads: BSP - NPT - SAE - METRIC
30 5 25 17.6 35 189 280 130 130 130 0.030
35 6 31.5 26 35 288 480 140 130 140 0.040
• Optional seals: FKM, EPDM or more 39 7 40 30 30 379 700 130 120 130 0.050
• Working pressure: 300-350 bar 50 8 50 40.6 30 757 1000 150 120 140 0.100
• Connection under pressure: allowed 1 MPa = 145.04 psi • 1 l = 0.264 gal

• Kupplung: Schraubweise mit splint

• Accrochage: a vissé avec goupille

PVT4 CS
PVT4 CS DN13 - BG 2 - ISO 10
(pcs.) (pcs.)
IG 1 73.5 75 BSP 3/8" DIN 3852-2-X PVT4.1310.112 315 45 PVT4.1310.113 CS 281 40
73.5 78 NPT 3/8" ANSI B1.20.3 PVT4.1310.012 317 45 PVT4.1310.013 CS 307 40
73.5 75 BSP 1/2" DIN 3852-2-X PVT4.1313.112 300 45 PVT4.1313.113 CS 277 40
73.5 78 NPT 1/2" ANSI B1.20.3 PVT4.1313.012 303 45 PVT4.1313.013 CS 291 40
73.5 75 M14x1.5 ISO 6149-1 PVT4.1314.102 301 45 PVT4.1314.103 CS 289 40
73.5 75 M16x1.5 ISO 6149-1 PVT4.1316.102 318 45 PVT4.1316.103 CS 284 40
73.5 75 M18x1.5 ISO 6149-1 PVT4.1318.102 311 45 PVT4.1318.103 CS 277 40
73.5 75 M20x1.5 ISO 6149-1 PVT4.1320.102 315 45 PVT4.1320.103 CS 281 40
IG 2 72 75 9/16"-18 UNF 2B SAE J 1926-1 PVT4.1315.032 315 45 PVT4.1315.033 CS 288 40
73.5 75 3/4"-16 UNF 2B SAE J 1926-1 PVT4.1319.032 307 45 PVT4.1319.033 CS 283 40
74.5 79 7/8"-14 UNF 2B SAE J 1926-1 PVT4.1323.032 293 45 PVT4.1323.033 CS 282 40
74.5 75 M22x1.5 SAE J 2244/1 PVT4.1322.102 299 45 PVT4.1322.103 CS 285 40
THREADS
IG 1 IG 2

PVT4 CS
PVT4 CS DN20 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 86 87.5 BSP 1/2" DIN 3852-2-X PVT4.2013.112 CS 527 30 PVT4.2013.113 CS 483 30
86 89 NPT 1/2" ANSI B1.20.3 PVT4.2013.012 CS 530 30 PVT4.2013.013 CS 496 30
86 89.5 BSP 3/4" DIN 3852-2-X PVT4.2019.112 CS 496 30 PVT4.2019.113 CS 463 30
85 85.5 M18x1.5 ISO 6149-1 PVT4.2018.102 CS 532 30 PVT4.2018.103 CS 482 30
85 85 M22x1.5 ISO 6149-1 PVT4.2022.102 CS 515 30 PVT4.2022.103 CS 465 30
IG 2 82 85 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2019.032 CS 505 30 PVT4.2019.033 CS 475 30
84 89 7/8"-14 UNF 2B SAE J 1926-1 PVT4.2023.032 CS 510 30 PVT4.2023.033 CS 487 30
86 89 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2027.032 CS 490 30 PVT4.2027.033 CS 457 30
PVT4 CS DN22 - BG 4A - ISO 16
(g) (pcs.) (g) (pcs.)
IG 1 86 87.5 BSP 1/2" DIN 3852-2-X PVT4.2213.112 CS 523 30 PVT4.2213.113 CS 534 30
86 89.5 BSP 3/4" DIN 3852-2-X PVT4.2219.112 CS 492 30 PVT4.2219.113 CS 514 30
85 85.5 M18x1.5 ISO 6149-1 PVT4.2218.102 CS 528 30 PVT4.2218.103 CS 533 30
IG 2 82 85 3/4"-16 UNF 2B SAE J 1926-1 PVT4.2219.032 CS 501 30 PVT4.2219.033 CS 526 30
84 89 7/8"-14 UNF 2B SAE J 1926-1 PVT4.2223.032 CS 506 30 PVT4.2223.033 CS 538 30
THREADS
IG 1 IG 2

PVT4 CS
(g) (pcs.) (g) (pcs.)
IG 1 94.5 BSP 3/4" DIN 3852-2-X PVT4.2519.112 CS 740 23 PVT4.2519.113 CS 859 24
94.5 NPT 3/4" ANSI B1.20.3 PVT4.2519.012 CS 745 23 PVT4.2519.013 CS 866 24
97.5 BSP 1" DIN 3852-2-X PVT4.2525.112 CS 711 23 PVT4.2525.113 CS 782 24
97.5 NPT 1" ANSI B1.20.3 PVT4.2525.012 CS 717 23 PVT4.2525.013 CS 808 24
97.5 M30x1.5 ISO 6149-1 PVT4.2530.102 CS 741 23 PVT4.2530.103 CS 832 24
IG 2 95 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2527.032 CS 748 23 PVT4.2527.033 CS 853 24
95 1"5/16-12 UN 2B SAE J 1926-1 PVT4.2533.032 CS 689 23 PVT4.2533.033 CS 794 24
THREADS CH2 CH3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 50 50 BSP 1" DIN 3852-2-X PVT4.3025.112 CS 1227 15 PVT4.3025.113 CS 1362 12
50 50 NPT 1" ANSI B1.20.3 PVT4.3025.012 CS 1242 15 PVT4.3025.013 CS 1368 12
55 55 BSP 1"¼ DIN 3852-2-X PVT4.3031.112 CS 1234 15 PVT4.3031.113 CS 1432 12
55 55 NPT 1"¼ ANSI B1.20.3 PVT4.3031.012 CS 1251 15 PVT4.3031.013 CS 1446 12
IG 2 50 50 1"5/16-12 UN 2B SAE J 1926-1 PVT4.3033.032 CS 1227 15 PVT4.3033.033 CS 1351 12
THREADS
IG 1 IG 2

PVT4 CS
PVT4 CS DN35 - BG 6 - ISO 31.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PVT4.3531.112 CS 2277 8 PVT4.3531.113 CS 2815 7
NPT 1"¼ ANSI B1.20.3 PVT4.3531.012 CS 2292 8 PVT4.3531.013 CS 2830 7
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PVT4.3541.032 CS 2277 8 PVT4.3541.033 CS 2815 7
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"½ DIN 3852-2-X PVT4.3939.112 CS 3840 3 PVT4.3939.113 CS 3743 5
NPT 1"½ ANSI B1.20.3 PVT4.3939.012 CS 3855 3 PVT4.3939.013 CS 3773 5
1"7/8-12 UN 2B SAE J 1926-1 PVT4.3947.032 CS 3830 3 PVT4.3947.033 CS 3733 5
THREADS
IG 1 IG 2

PVT4 CS
(g) (pcs.) (g) (pcs.)
IG 1 BSP 2" DIN 3852-2-X PVT4.5051.112 CS 6750 3 PVT4.5051.113 CS 6450 4
NPT 2" ANSI B1.20.3 PVT4.5051.012 CS 6780 3 PVT4.5051.013 CS 6480 4
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVT4 CS

13 2 10 SPVT.13002 38 220 32 38 SPVT.13003 36 220 32 36 PVC
20 3 12.5 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
22 4A 16 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC
30 5 25 SPVT.30002 60 438 47.5 94 SPVT.30003 60 438 47.5 91 PVC

13 2 10 PLT.319.031 S PLT.013.120 PLT.013.130 PLK.013.210

20 3 12.5 PVT.019.121 S PLT.019.120 PLT.019.130 PVT.019.210
22 4A 16 PVT.019.121 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PVT.025.121 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PVT.030.121 S PLT.031.120 PLT.031.130 PVT.030.210
35 6 31.5 PVT.035.121 S PLS.025.120 PLT.035.130 -
39 7 40 PVT.039.121 S PLT.039.120 PLT.039.130 -
50 8 50 PVT.050.121 S PLK.050.120 PLK.050.130 -

PVTF
FLAT FACE/SCREW
VITE VALVOLA PIANA FLANGIATO

FLANGED FLAT FACE SCREW COUPLINGS COLOR
GEFLANSCHTE FLACHDICHTENDE CODE
SCHRAUBKUPPLUNGEN
COUPLEURS FACE PLANE À VISSER BRIDÉS

• Connessione: Flange SAE 6000
• Connessione in pressione: consentita Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Interchange: exclusive Dnp profile 20 3 12.5 10.7 35 45 90 140 160 140 0.012
• Occlusion: flat face 22 4A 16 12.8 35 74 150 130 130 130 0.015
• Locking: screw
25 4 19 14.8 35 100 200 130 140 130 0.020
• Material: steel
• Connection: SAE 6000 flanges 35 6 31.5 26 35 288 480 140 130 140 0.040
• Standard seals: NBR and PU 39 7 40 30 30 379 700 130 120 130 0.050

• Anschluss: SAE 6000-Flansche

• Accrochage: vissé
• Connexion: SAE 6000 brides

PVTF
PVTF DN20 - BG 3 - ISO 12.5
SIZE STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
3/4" SAE J518 PVTF.2027.802 750 15 PVTF.2027.803 720 15
T SIZE STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
M10 3/4" SAE J518 PVTF.2027.812 1005 10 PVTF.2027.813 970 10

3/8"-16 UNC 3/4" SAE J518 PVTF.2027.822 1005 10 PVTF.2027.823 970 10
PVTF DN22 - BG 4A - ISO 16
3/4" SAE J518 PVTF.2227.802 745 15 PVTF.2227.803 730 15
M10 3/4" SAE J518 PVTF.2227.812 995 10 PVTF.2227.813 980 10

3/8"-16 UNC 3/4" SAE J518 PVTF.2227.822 995 10 PVTF.2227.823 980 10

PVTF
PVTF DN25 - BG 4 - ISO 19
1" SAE J518 PVTF.2533.802 1200 12 PVTF.2533.803 1200 12
(pcs.)
M12 1" SAE J518 PVTF.2533.812 1480 8 PVTF.2533.813 1480 8
7/16"-14 UNC 1" SAE J518 PVTF.2533.822 1480 8 PVTF.2533.823 1480 8
(pcs.)
1"¼ SAE J518 PVTF.3041.802 2250 8 PVTF.3041.803 2440 6
(pcs.)
M14 1"¼ SAE J518 PVTF.3041.812 2390 5 PVTF.3041.813 2575 5
1/2"-13 UNC 1"¼ SAE J518 PVTF.3041.822 2390 5 PVTF.3041.823 2575 5

PVTF
PVTF DN35 - BG 6 - ISO 31.5
(pcs.)
1"¼ SAE J518 PVTF.3541.802 3310 4 PVTF.3541.803 3900 4
(pcs.)
M14 1"¼ SAE J518 PVTF.3541.812 3445 3 PVTF.3541.813 4035 3
1/2"-13 UNC 1"¼ SAE J518 PVTF.3541.822 3445 3 PVTF.3541.823 4035 3
(pcs.)
1"½ SAE J518 PVTF.3947.802 5160 2 PVTF.3947.803 5090 2
(pcs.)
M16 1"½ SAE J518 PVTF.3947.812 5550 1 PVTF.3947.813 5470 1
5/8"-11 UNC 1"½ SAE J518 PVTF.3947.822 5550 1 PVTF.3947.823 5470 1

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVTF
20 3 12.5 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC

22 4A 16 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC
30 5 25 SPVT.30002 60 438 47.5 94 SPVT.30003 60 438 47.5 91 PVC

SPARE PARTS NOMINAL SIZE FEMALE GASKET MALE GASKET MALE GASKET FLANGE GASKET
DNP BG ISO OR-E (SILICONE) OR (NBR) BK (PTFE) PU (POLYURETHANE) OR-C (NBR)
20 3 12.5 PVT.019.121 S PLT.019.120 PLT.019.130 PVT.019.210 SAE.020.120

22 4A 16 PVT.019.121 S PLT.022.120 PLT.022.130 PVT.022.210 SAE.020.120
25 4 19 PVT.025.121 S PLT.025.120 PLT.025.130 PVT.025.210 PGR.025.120
30 5 25 PVT.030.121 S PLT.031.120 PLT.031.130 PVT.030.210 PBV.025.120
35 6 31.5 PVT.035.121 S PLS.025.120 PLT.035.130 - PBV.025.120
39 7 40 PVT.039.121 S PLT.039.120 PLT.039.130 - SAE.039.120

PVTX
FLAT FACE/SCREW
VITE VALVOLA PIANA/ACCIAIO INOX COLOR

FLAT FACE SCREW COUPLINGS/STAINLESS STEEL CODE
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/
EDELSTAHL
COUPLEURS FACE PLANE À VISSER/ACIER INOX

• Materiale: interni in acciaio,
parti esterne in inox AISI 316
• Guarnizioni opzionali: FKM, EPDM o altro Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
(lato maschio o lato femmina) Nominal size
Technical data E 06 1 6.3 6 30 12 24 160 160 160 0.008
• Interchange: exclusive Dnp profile 13 2 10 8.6 25 23 46 140 100 140 0.010
• Occlusion: flat face 20 3 12.5 10.7 25 45 90 140 120 170 0.012

• Locking: screw 22 4A 16 12.8 25 74 150 140 110 160 0.015
• Material: internals in steel, 25 4 19 14.8 25 100 200 110 110 110 0.020
externals in stainless AISI 316
30 5 25 17.6 25 189 280 100 100 100 0.030
• Working temperature: -25 °C +100 °C 50 8 50 40.6 15 757 1000 80 65 85 0.100
1 MPa = 145.04 psi • 1 l = 0.264 gal

• Werkstoff: Innenteile aus Stahl,
Aussenteile aus Edelstahl AISI 316

• Matériel: en acier à l’intérieur,
en inox AISI 316 à l’extérieur

PVTX
PVTX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PVTX.0606.112 168 55 PVTX.0606.113 198 60
NPT 1/4" ANSI B1.20.3 PVTX.0606.012 169 55 PVTX.0606.013 199 60
PVTX DN13 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 73.5 75 BSP 3/8" DIN 3852-2-X PVTX.1310.112 296 45 PVTX.1310.113 333 40
73.5 78 NPT 3/8" ANSI B1.20.3 PVTX.1310.012 299 45 PVTX.1310.013 349 40
73.5 75 BSP 1/2" DIN 3852-2-X PVTX.1313.112 284 45 PVTX.1313.113 320 40
IG 2 73.5 75 3/4"-16 UNF 2B SAE J 1926-1 PVTX.1319.032 302 45 PVTX.1319.033 293 40
PVTX DN20 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 83.5 86.5 BSP 1/2" DIN 3852-2-X PVTX.2013.112 537 30 PVTX.2013.113 493 30
83.5 88 BSP 3/4" DIN 3852-2-X PVTX.2019.112 506 30 PVTX.2019.113 473 30
IG 2 83.5 88 1"1/16-12 UN 2B SAE J 1926-1 PVTX.2027.032 500 30 PVTX.2027.033 467 30
THREADS
IG 1 IG 2

PVTX
PVTX DN22 - BG 4A - ISO 16
(g) (pcs.) (g) (pcs.)
IG 1 86 89.5 BSP 1/2" DIN 3852-2-X PVTX.2213.112 528 30 PVTX.2213.113 502 30
86 90 NPT 1/2" ANSI B1.20.3 PVTX.2213.012 531 30 PVTX.2213.013 515 30
86 91 BSP 3/4" DIN 3852-2-X PVTX.2219.112 497 30 PVTX.2219.113 482 30
86 91 NPT 3/4" ANSI B1.20.3 PVTX.2219.012 500 30 PVTX.2219.013 530 30
IG 2 86 91 1"1/16-12 UN 2B SAE J 1926-1 PVTX.2227.032 491 30 PVTX.2227.033 477 30
(g) (pcs.) (g) (pcs.)
IG 1 95.5 102 BSP 3/4" DIN 3852-2-X PVTX.2519.112 754 23 PVTX.2519.113 751 20
97.5 102 BSP 1" DIN 3852-2-X PVTX.2525.112 725 23 PVTX.2525.113 693 20
97.5 105 NPT 1" ANSI B1.20.3 PVTX.2525.012 740 23 PVTX.2525.013 700 20
IG 2 95 105 1"5/16-12 UN 2B SAE J 1926-1 PVTX.2533.032 703 23 PVTX.2533.033 687 20
THREADS
IG 1 IG 2

PVTX

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PVTX.3031.112 1248 15 PVTX.3031.113 1432 12
NPT 1"¼ ANSI B1.20.3 PVTX.3031.012 1265 15 PVTX.3031.013 1446 12

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PVTX.3939.112 3840 5 PVTX.3939.113 3760 5
NPT 1"½ ANSI B1.20.3 PVTX.3939.012 3610 5 PVTX.3939.013 3790 5

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PVTX.5051.112 6240 3 PVTX.5051.113 5900 3
NPT 2" ANSI B1.20.3 PVTX.5051.012 6900 3 PVTX.5051.013 6000 3

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVTX

06 1 6.3 SPVT.06002 32 220 32 27 SPVT.06003 32 220 32 29 PVC
13 2 10 SPVT.13002 38 220 32 38 SPVT.13003 36 220 32 36 PVC
20 3 12.5 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
22 4A 16 SPVT.20002 45 220 32 48 SPVT.20003 45 220 32 48 PVC
25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC
30 5 25 SPVT.30002 60 438 47.5 94 SPVT.30003 60 438 47.5 91 PVC
39 7 40 SPVT.39002 100 438 47.5 266 SPVT.39003 100 438 47.5 408 PVC
50 8 50 SPVT.50002 115 438 47.5 384 SPVT.50003 115 438 47.5 416 PVC

06 1 6.3 SPVT.06202 30 205 27 30 SPVT.06203 32 205 27 38 Aluminum
39 7 40 SPST.39202 90 370 60 400 SPST.39203 90 370 60 509 Aluminum
06 1 6.3 PLK.025.121 S PLT.006.120 PLT.006.130 -

13 2 10 PLT.319.031 S PLT.013.120 PLT.013.130 PLK.013.210
20 3 12.5 PVT.019.121 S PLT.019.120 PLT.019.120 PVT.019.210
22 4A 16 PVT.019.121 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PVT.025.121 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PVT.030.121 S PLT.031.120 PLT.031.130 PVT.030.210
39 7 40 PST.039.122 S PLT.039.120 PLT.039.130 -
50 8 50 PVT.050.122 S PLK.050.120 PLK.050.130 -

PVT4 BOP
FLAT FACE/SCREW

FLAT FACE SCREW COUPLINGS/STEEL CODE

• Omologazione: API 16D
• Guarnizioni standard: mescola speciale
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Approval: API 16D
• Occlusion: flat face DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Locking: screw 25 4 19 14.8 35 100 200 130 140 130 0.020

• Material: steel
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Standard seals: special compound

• Zulassung: API 16D
• Standard-Dichtungen: Sondermischung

• Attestation: API 16D
• Joints standard: compose spécial

PVT4 BOP
PVT4 BOP DN25 - BG 4 - ISO 19
(g) (pcs.) (g) (pcs.)
IG 1 94.5 105 BSP 3/4" DIN 3852-2-X PVT4.2519.112 BOP 740 12 PVT4.2519.113 BOP 751 12
94.5 105 NPT 3/4" ANSI B1.20.3 PVT4.2519.012 BOP 745 12 PVT4.2519.013 BOP 758 12
97.5 105 BSP 1" DIN 3852-2-X PVT4.2525.112 BOP 711 12 PVT4.2525.113 BOP 688 12
97.5 105 NPT 1" ANSI B1.20.3 PVT4.2525.012 BOP 717 12 PVT4.2525.013 BOP 700 12
IG 2 95 105 1"1/16-12 UN 2B SAE J 1926-1 PVT4.2527.032 BOP 748 12 PVT4.2527.033 BOP 745 12
95 105 1"5/16-12 UN 2B SAE J 1926-1 PVT4.2533.032 BOP 689 12 PVT4.2533.033 BOP 687 12
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVT4 BOP

25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC


PVTX BOP
FLAT FACE/SCREW
VITE VALVOLA PIANA/ACCIAIO INOX COLOR

FLAT FACE SCREW COUPLINGS/STAINLESS STEEL CODE
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/
EDELSTAHL
COUPLEURS FACE PLANE À VISSER/ACIER INOX

• Materiale: interni in acciaio,
parti esterne in AISI 316
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Locking: screw
• Material: internals in steel, 25 4 19 14.8 25 100 200 110 110 110 0.020
externals in stainless AISI 316 1 MPa = 145.04 psi • 1 l = 0.264 gal

• Werkstoff: Innenteile aus Stahl,
Aussenteile aus Edelstahl AISI 316

• Matériel: en acier à l’intérieur,
en inox AISI 316 à l’extérieur

PVTX BOP
PVTX BOP DN25 - BG 4 - ISO 19
(g) (pcs.) (g) (pcs.)
IG 1 95.5 102 BSP 3/4" DIN 3852-2-X PVTX.2519.112 BOP 754 12 PVTX.2519.113 BOP 751 12
95.5 102 NPT 3/4" ANSI B1.20.3 PVTX.2519.012 BOP 759 12 PVTX.2519.013 BOP 758 12
97.5 102 BSP 1" DIN 3852-2-X PVTX.2525.112 BOP 725 12 PVTX.2525.113 BOP 693 12
97.5 105 NPT 1" ANSI B1.20.3 PVTX.2525.012 BOP 740 12 PVTX.2525.013 BOP 830 12
IG 2 95 105 1"5/16-12 UN 2B SAE J 1926-1 PVTX.2533.032 BOP 703 12 PVTX.2533.033 BOP 687 12
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVTX BOP

25 4 19 SPVT.25002 53 290 47.5 72 SPVT.25003 48 290 47.5 74 PVC


PST4
FLAT FACE/SCREW

FLAT FACE SCREW COUPLINGS/STEEL CODE
• Intercambiabilità: Stucchi VEP

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max

• Interchange: Stucchi VEP
• Locking: screw 13 2 10 8.6 35 23 46 130 170 140 0.010
• Material: steel 20 3 12.5 10.7 35 45 90 140 140 140 0.012
22 4A 16 12.8 35 74 150 140 140 140 0.015
25 4 19 14.8 35 100 200 140 140 140 0.020
• Working temperature: -25 °C +100 °C 30 5 25 17.6 35 189 280 140 140 140 0.030
• Optional seals: FKM, EPDM or more 39 7 40 30 30 379 700 120 120 120 0.050
• Austauschbarkeit: Stucchi VEP

• Interchangeabilité: Stucchi VEP


PST4
PST4 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/4" DIN 3852-2-X PST4.0606.112 268 35 PST4.0606.113 237 45
NPT 1/4" ANSI B1.20.3 PST4.0606.012 269 35 PST4.0606.013 238 45
IG 2 9/16"-18 UNF 2B SAE J 1926-1 PST4.0615.032 265 35 PST4.0615.033 237 45
PST4 DN13 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 75.1 74 BSP 3/8" DIN 3852-2-X PST4.1310.112 381 33 PST4.1310.113 298 35
75.1 77.5 NPT 3/8" ANSI B1.20.3 PST4.1310.012 383 33 PST4.1310.013 314 35
75.1 74 BSP 1/2" DIN 3852-2-X PST4.1313.112 366 33 PST4.1313.113 284 35
75.1 78 NPT 1/2" ANSI B1.20.3 PST4.1313.012 369 33 PST4.1313.013 301 35
IG 2 73.6 75 9/16"-18 UNF 2B SAE J 1926-1 PST4.1315.032 380 33 PST4.1315.033 309 35
75.1 75 3/4"-16 UNF 2B SAE J 1926-1 PST4.1319.032 373 33 PST4.1319.033 293 35
THREADS
IG 1 IG 2

PST4
PST4 DN20 - BG 3 - ISO 12.5 (T)
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PST4.2013.112 T 619 25 PST4.2013.113 541 28
NPT 1/2" ANSI B1.20.3 PST4.2013.012 T 624 25 PST4.2013.013 542 28
BSP 3/4" DIN 3852-2-X PST4.2019.112 T 586 25 PST4.2019.113 503 28
IG 2 3/4"-16 UNF 2B SAE J 1926-1 PST4.2019.032 T 625 25 PST4.2019.033 544 28
1"1/16-12 UN 2B SAE J 1926-1 PST4.2027.032 T 580 25 PST4.2027.033 498 28
PST4 DN20 - BG 3 - ISO 12.5 (E)
(g) (pcs.) (g) (pcs.)
NPT 1/2" ANSI B1.20.3 PST4.2013.012 659 25 PST4.2013.013 542 28
BSP 3/4" DIN 3852-2-X PST4.2019.112 622 25 PST4.2019.113 503 28
NPT 3/4" ANSI B1.20.3 PST4.2019.012 630 25 PST4.2019.013 510 28
IG 2 3/4"-16 UNF 2B SAE J 1926-1 PST4.2019.032 661 25 PST4.2019.033 544 28
1"1/16-12 UN 2B SAE J 1926-1 PST4.2027.032 616 25 PST4.2027.033 498 28
THREADS
IG 1 IG 2

PST4
PST4 DN22 - BG 4A - ISO 16 (T)
(g) (pcs.) (g) (pcs.)
IG 1 BSP 3/4" DIN 3852-2-X PST4.2219.112 T 706 20 PST4.2219.113 593 20
IG 2 1"1/16-12 UN 2B SAE J 1926-1 PST4.2227.032 T 700 20 PST4.2227.033 588 20
PST4 DN22 - BG 4A - ISO 16 (E)
(g) (pcs.) (g) (pcs.)
NPT 3/4" ANSI B1.20.3 PST4.2219.012 758 20 PST4.2219.013 599 20
IG 2 1"1/16-12 UN 2B SAE J 1926-1 PST4.2227.032 743 20 PST4.2227.033 588 20
THREADS
IG 1 IG 2

PST4
PST4 DN25 - BG 4 - ISO 19 (T)
(g) (pcs.) (g) (pcs.)
IG 1 96 103 BSP 3/4" DIN 3852-2-X PST4.2519.112 T 967 18 PST4.2519.113 980 18
96 104 NPT 3/4" ANSI B1.20.3 PST4.2519.012 T 972 18 PST4.2519.013 987 18
99 107 BSP 1" DIN 3852-2-X PST4.2525.112 T 938 18 PST4.2525.113 922 18
99 107 NPT 1" ANSI B1.20.3 PST4.2525.012 T 944 18 PST4.2525.013 932 18
IG 2 96.5 104 1"1/16-12 UN 2B SAE J 1926-1 PST4.2527.032 T 975 18 PST4.2527.033 955 18
96.5 105 1"5/16-12 UN 2B SAE J 1926-1 PST4.2533.032 T 916 18 PST4.2533.033 897 18
PST4 DN25 - BG 4 - ISO 19 (E)
(g) (pcs.) (g) (pcs.)
IG 1 96 103 BSP 3/4" DIN 3852-2-X PST4.2519.112 1026 18 PST4.2519.113 980 18
96 104 NPT 3/4" ANSI B1.20.3 PST4.2519.012 1031 18 PST4.2519.013 987 18
99 107 BSP 1" DIN 3852-2-X PST4.2525.112 997 18 PST4.2525.113 922 18
99 107 NPT 1" ANSI B1.20.3 PST4.2525.012 1003 18 PST4.2525.013 932 18
IG 2 96.5 104 1"1/16-12 UN 2B SAE J 1926-1 PST4.2527.032 1034 18 PST4.2527.033 955 18
96.5 105 1"5/16-12 UN 2B SAE J 1926-1 PST4.2533.032 975 18 PST4.2533.033 897 18
THREADS
IG 1 IG 2

PST4
PST4 DN30 - BG 5 - ISO 25 (T)
(g) (pcs.) (g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X PST4.3025.112 T 1618 12 PST4.3025.113 1656 13
50 NPT 1" ANSI B1.20.3 PST4.3025.012 T 1641 12 PST4.3025.013 1662 13
55 BSP 1"¼ DIN 3852-2-X PST4.3031.112 T 1620 12 PST4.3031.113 1519 13
55 NPT 1"¼ ANSI B1.20.3 PST4.3031.012 T 1634 12 PST4.3031.013 1540 13
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 PST4.3033.032 T 1617 12 PST4.3033.033 1645 13
55 1"5/8-12 UN 2B SAE J 1926-1 PST4.3041.032 T 1622 12 PST4.3041.033 1549 13
PST4 DN30 - BG 5 - ISO 25 (E)
(g) (pcs.) (g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X PST4.3025.112 1700 12 PST4.3025.113 1656 13
50 NPT 1" ANSI B1.20.3 PST4.3025.012 1722 12 PST4.3025.013 1662 13
55 BSP 1"¼ DIN 3852-2-X PST4.3031.112 1700 12 PST4.3031.113 1519 13
55 NPT 1"¼ ANSI B1.20.3 PST4.3031.012 1715 12 PST4.3031.013 1540 13
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 PST4.3033.032 1698 12 PST4.3033.033 1645 13
55 1"5/8-12 UN 2B SAE J 1926-1 PST4.3041.032 1703 12 PST4.3041.033 1549 13
THREADS
IG 1 IG 2

PST4
PST4 DN39 - BG 7 - ISO 40 (T)
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PST4.3931.112 T 3328 6 PST4.3931.113 3822 6
NPT 1"¼ ANSI B1.20.3 PST4.3931.012 T 3346 6 PST4.3931.013 3840 6
BSP 1"½ DIN 3852-2-X PST4.3939.112 T 3256 6 PST4.3939.113 3750 6
NPT 1"½ ANSI B1.20.3 PST4.3939.012 T 3271 6 PST4.3939.013 3767 6
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PST4.3941.032 T 3326 6 PST4.3941.033 3820 6
1"7/8-12 UN 2B SAE J 1926-1 PST4.3947.032 T 3246 6 PST4.3947.033 3728 6
PST4 DN39 - BG 7 - ISO 40 (E)
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PST4.3931.112 3572 6 PST4.3931.113 3822 6
NPT 1"¼ ANSI B1.20.3 PST4.3931.012 3590 6 PST4.3931.013 3840 6
BSP 1"½ DIN 3852-2-X PST4.3939.112 3500 6 PST4.3939.113 3750 6
NPT 1"½ ANSI B1.20.3 PST4.3939.012 3515 6 PST4.3939.013 3767 6
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PST4.3941.032 3570 6 PST4.3941.033 3820 6
1"7/8-12 UN 2B SAE J 1926-1 PST4.3947.032 3490 6 PST4.3947.033 3728 6
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PST4
06 1 6.3 SPST.06202 35 150 25 46 SPST.06203 35 150 25 46 Aluminum

22 4A 16 SPST.22202 50 215 30 102 SPST.22203 50 215 30 109 Aluminum
SPARE PARTS NOMINAL SIZE MALE GASKET MALE GASKET MALE GASKET
DNP BG ISO OR-E (SILICONE) OR-I (NBR) BK (PTFE) PU (POLYURETHANE)
06 1 6.3 PLT.319.031 S PLT.006.120 PLT.006.130 -

13 2 10 PAV.019.120 S PLT.013.120 PLT.013.130 PLK.013.210
20 3 12.5 PGR.025.120 S PLT.019.120 PLT.019.130 PVT.019.210
22 4A 16 PBV.025.120 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PAV.030.120 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PDV.039.120 S PLT.031.120 PLT.031.130 PVT.030.210
39 7 40 PST.039.122 S PLT.039.120 PLT.039.130 -

PST4 CS
FLAT FACE/SCREW
VITE VALVOLA PIANA/SICURA

FLAT FACE SCREW COUPLINGS/PIN LOCK
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/SPLINT
COUPLEURS FACE PLANE À VISSER/GOUPILLE

• Aggancio: a vite con sicura
(lato maschio o lato femmina) Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
Technical data E
flow
Max
Nominal size
• Interchange: Stucchi VEP DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Locking: screw with pin lock 22 4A 16 12.8 35 74 150 140 140 140 0.015
• Material: steel
25 4 19 14.8 35 100 200 140 140 140 0.020
• Threads: BSP - NPT - SAE 30 5 25 17.6 35 189 280 140 140 140 0.030

• Kupplung: Schraubweise mit splint

• Accrochage: a vissé avec goupille

PST4 CS
PST4 CS DN20 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PST4.2013.112 CS 655 25 PST4.2013.113 CS 541 28
NPT 1/2" ANSI B1.20.3 PST4.2013.012 CS 659 25 PST4.2013.013 CS 542 28
BSP 3/4" DIN 3852-2-X PST4.2019.112 CS 622 25 PST4.2019.113 CS 503 28
IG 2 3/4"-16 UNF 2B SAE J 1926-1 PST4.2019.032 CS 625 25 PST4.2019.033 CS 544 28
1"1/16-12 UN 2B SAE J 1926-1 PST4.2027.032 CS 580 25 PST4.2027.033 CS 498 28
PST4 CS DN22 - BG 4A - ISO 16
(g) (pcs.) (g) (pcs.)
IG 1 BSP 3/4" DIN 3852-2-X PST4.2219.112 CS 715 20 PST4.2219.113 CS 575 20
IG 2 1"1/16-12 UN 2B SAE J 1926-1 PST4.2227.032 CS 709 20 PST4.2227.033 CS 570 20
THREADS
IG 1 IG 2

PST4 CS
PST4 CS DN25 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 96 103 BSP 3/4" DIN 3852-2-X PST4.2519.112 CS 971 18 PST4.2519.113 CS 926 18
96 104 NPT 3/4" ANSI B1.20.3 PST4.2519.012 CS 977 18 PST4.2519.013 CS 932 18
99 107 BSP 1" DIN 3852-2-X PST4.2525.112 CS 943 18 PST4.2525.113 CS 898 18
99 107 NPT 1" ANSI B1.20.3 PST4.2525.012 CS 949 18 PST4.2525.013 CS 908 18
IG 2 96.5 104 1"1/16-12 UN 2B SAE J 1926-1 PST4.2527.032 CS 980 18 PST4.2527.033 CS 932 18
96.5 105 1"5/16-12 UN 2B SAE J 1926-1 PST4.2533.032 CS 921 18 PST4.2533.033 CS 873 18
PST4 CS DN30 - BG 5 - ISO 25
(g) (pcs.) (g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X PST4.3025.112 CS 1700 12 PST4.3025.113 CS 1656 13
50 NPT 1" ANSI B1.20.3 PST4.3025.012 CS 1722 12 PST4.3025.013 CS 1662 13
55 BSP 1"¼ DIN 3852-2-X PST4.3031.112 CS 1700 12 PST4.3031.113 CS 1519 13
55 NPT 1"¼ ANSI B1.20.3 PST4.3031.012 CS 1715 12 PST4.3031.013 CS 1540 13
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 PST4.3033.032 CS 1698 12 PST4.3033.033 CS 1645 13
55 1"5/8-12 UN 2B SAE J 1926-1 PST4.3041.032 CS 1703 12 PST4.3041.033 CS 1549 13
THREADS
IG 1 IG 2

PST4 CS
PST4 CS DN39 - BG 7 - ISO 40
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"½ DIN 3852-2-X PST4.3939.112 CS 3250 6 PST4.3939.113 CS 3721 6
NPT 1"½ ANSI B1.20.3 PST4.3939.012 CS 3265 6 PST4.3939.013 CS 3738 6
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PST4.3941.032 CS 3320 6 PST4.3941.033 CS 3790 6
1"7/8-12 UN 2B SAE J 1926-1 PST4.3947.032 CS 3240 6 PST4.3947.033 CS 3700 6
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PST4 CS

20 3 12.5 PGR.025.120 S PLT.019.120 PLT.019.130 PVT.019.210

22 4A 16 PBV.025.120 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PAV.030.120 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PDV.039.120 S PLT.031.120 PLT.031.130 PVT.030.210
39 7 40 PST.039.122 S PLT.039.120 PLT.039.130 -

PSTF
FLAT FACE/SCREW
VITE VALVOLA PIANA FLANGIATO

FLANGED FLAT FACE SCREW COUPLINGS
GEFLANSCHTE FLACHDICHTENDE
SCHRAUBKUPPLUNGEN
COUPLEURS FACE PLANE À VISSER BRIDÉS

• Connessione: Flange SAE 6000
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Interchange: Stucchi VEP DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc

• Locking: screw 22 4A 16 12.8 35 74 150 140 140 140 0.015
• Material: steel
25 4 19 14.8 35 100 200 140 140 140 0.020
• Connection: SAE 6000 flanges 30 5 25 17.6 35 189 280 140 140 140 0.030

• Anschluss: SAE 6000-Flansche

• Connexion: SAE 6000 brides

PSTF
PSTF DN20 - BG 3 - ISO 12.5
(pcs.)
3/4" SAE J518 PSTF.2027.802 830 14 PSTF.2027.803 750 14
(pcs.)
M10 3/4" SAE J518 PSTF.2027.812 1085 8 PSTF.2027.813 1000 8
3/8"-16 UNC 3/4" SAE J518 PSTF.2027.822 1085 8 PSTF.2027.823 1000 8
PSTF DN22 - BG 4A - ISO 16
(pcs.)
3/4" SAE J518 PSTF.2227.802 950 10 PSTF.2227.803 840 10
(pcs.)
M10 3/4" SAE J518 PSTF.2227.812 1205 8 PSTF.2227.813 1090 8
3/8"-16 UNC 3/4" SAE J518 PSTF.2227.822 1205 8 PSTF.2227.823 1090 8

PSTF
PSTF DN25 - BG 4 - ISO 19
(pcs.)
1" SAE J518 PSTF.2533.802 1425 9 PSTF.2533.803 1405 9
(pcs.)
M12 1" SAE J518 PSTF.2533.812 1705 6 PSTF.2533.813 1690 6
7/16"-14 UNC 1" SAE J518 PSTF.2533.822 1705 6 PSTF.2533.823 1690 6
(pcs.)
1"¼ SAE J518 PSTF.3041.802 2630 6 PSTF.3041.803 2550 6
(pcs.)
M14 1"¼ SAE J518 PSTF.3041.812 2760 4 PSTF.3041.813 2690 4
1/2"-13 UNC 1"¼ SAE J518 PSTF.3041.822 2760 4 PSTF.3041.823 2690 4

PSTF
(pcs.)
1"½ SAE J518 PSTF.3947.802 4575 3 PSTF.3947.803 5055 3
(pcs.)
M16 1"½ SAE J518 PSTF.3947.812 4965 2 PSTF.3947.813 5450 2
5/8"-11 UNC 1"½ SAE J518 PSTF.3947.822 4965 2 PSTF.3947.823 5450 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PSTF

20 3 12.5 PGR.025.120 S PLT.019.120 PLT.019.130 PVT.019.210

22 4A 16 PBV.025.120 S PLT.022.120 PLT.022.130 PVT.022.210
25 4 19 PAV.030.120 S PLT.025.120 PLT.025.130 PVT.025.210
30 5 25 PDV.039.120 S PLT.031.120 PLT.031.130 PVT.030.210
39 7 40 PST.039.122 S PLT.039.120 PLT.039.130 -

PST4 BOP
FLAT FACE/SCREW
VITE VALVOLA PIANA/ACCIAIO

FLAT FACE SCREW COUPLINGS/STEEL
COLOR
FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL CODE

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Stucchi VEP
20 3 12.5 10.7 35 45 90 140 140 140 0.012
• Occlusion: flat face 22 4A 16 12.8 35 74 150 140 140 140 0.015
• Locking: screw 25 4 19 14.8 35 100 200 140 140 140 0.020

• Material: steel 30 5 25 17.6 35 189 280 140 140 140 0.030
• Finishing: Zn-Fe (Cr III) and Zn-Ni 39 7 40 30 30 379 700 120 120 120 0.050
1 MPa = 145.04 psi • 1 l = 0.264 gal



PST4 BOP
PST4 BOP DN20 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PST4.2013.112 BOP 655 12 PST4.2013.113 BOP 541 12
NPT 1/2" ANSI B1.20.3 PST4.2013.012 BOP 659 12 PST4.2013.013 BOP 542 12
BSP 3/4" DIN 3852-2-X PST4.2019.112 BOP 622 12 PST4.2019.113 BOP 503 12
IG 2 3/4"-16 UNF 2B SAE J 1926-1 PST4.2019.032 BOP 630 12 PST4.2019.033 BOP 544 12
1"1/16-12 UN 2B SAE J 1926-1 PST4.2027.032 BOP 616 12 PST4.2027.033 BOP 498 12
PST4 BOP DN22 - BG 4A - ISO 16
(g) (pcs.) (g) (pcs.)
IG 1 BSP 3/4" DIN 3852-2-X PST4.2219.112 BOP 750 12 PST4.2219.113 BOP 593 12
IG 2 1"1/16-12 UN 2B SAE J 1926-1 PST4.2227.032 BOP 743 12 PST4.2227.033 BOP 588 12
PST4 BOP DN25 - BG 4 - ISO 19
(g) (pcs.) (g) (pcs.)
AG 3 96 103 BSP 3/4" DIN 3852-2-X PST4.2519.112 BOP 1110 11 PST4.2519.113 BOP 980 12
96 104 NPT 3/4" ANSI B1.20.3 PST4.2519.012 BOP 1115 11 PST4.2519.013 BOP 987 12
99 107 BSP 1" DIN 3852-2-X PST4.2525.112 BOP 1081 11 PST4.2525.113 BOP 922 12
99 107 NPT 1" ANSI B1.20.3 PST4.2525.012 BOP 1087 11 PST4.2525.013 BOP 932 12
IG 2 96.5 104 1"1/16-12 UN 2B SAE J 1926-1 PST4.2527.032 BOP 1118 11 PST4.2527.033 BOP 955 12
96.5 105 1"5/16-12 UN 2B SAE J 1926-1 PST4.2533.032 BOP 1059 11 PST4.2533.033 BOP 897 12
THREADS
IG 1 IG 2

PST4 BOP
(g) (pcs.) (g) (pcs.)
IG 1 50 BSP 1" DIN 3852-2-X PST4.3025.112 BOP 1700 12 PST4.3025.113 BOP 1656 12
50 NPT 1" ANSI B1.20.3 PST4.3025.012 BOP 1722 12 PST4.3025.013 BOP 1662 12
55 BSP 1"¼ DIN 3852-2-X PST4.3031.112 BOP 1700 12 PST4.3031.113 BOP 1519 12
55 NPT 1"¼ ANSI B1.20.3 PST4.3031.012 BOP 1715 12 PST4.3031.013 BOP 1540 12
IG 2 50 1"5/16-12 UN 2B SAE J 1926-1 PST4.3033.032 BOP 1698 12 PST4.3033.033 BOP 1645 12
55 1"5/8-12 UN 2B SAE J 1926-1 PST4.3041.032 BOP 1703 12 PST4.3041.033 BOP 1549 12
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PST4.3931.112 BOP 3761 6 PST4.3931.113 BOP 3822 6
NPT 1"¼ ANSI B1.20.3 PST4.3931.012 BOP 3779 6 PST4.3931.013 BOP 3840 6
BSP 1"½ DIN 3852-2-X PST4.3939.112 BOP 3689 6 PST4.3939.113 BOP 3750 6
NPT 1"½ ANSI B1.20.3 PST4.3939.012 BOP 3704 6 PST4.3939.013 BOP 3767 6
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PST4.3941.032 BOP 3759 6 PST4.3941.033 BOP 3820 6
1"7/8-12 UN 2B SAE J 1926-1 PST4.3947.032 BOP 3679 6 PST4.3947.033 BOP 3728 6
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PST4 BOP
20 3 12.5 SPST.20202 45 215 30 75 SPST.20203 45 215 30 90 Alumium

22 4A 16 SPST.22202 50 215 30 102 SPST.22203 50 215 30 109 Alumium
25 4 19 SPST.25202 55 230 30 147 SPST.25203 55 230 30 155 Alumium

PRH3
SCREW
INNESTI A VITE/RIMORCHI MODULARI

SCREW COUPLINGS/MODULAR TRAILERS
COLOR
SCHRAUBKUPPLUNGEN/ROHRLEITUNG CODE
COUPLEURS A VISSER/REMORQUES MODULAIRES
• Intercambiabilità: Voswinkel RH/RK

• Finitura: Zn-Ni
• Filettature: BSP - METRICHE
• Connessione in pressione: consentita (lato
maschio o lato femmina)
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Interchange: Voswinkel RH/RK
• Locking: screw 10 2 10 8.7 42 23 46 130 140 250 0.02
• Material: steel 13 3 12.5 11.6 42 45 90 130 100 155 0.02
• Finishing: Zn-Ni 20 4 19 17 42 106 150 110 130 130 0.06
• Threads: BSP - METRICS
25 5 25 21.8 42 189 240 125 160 170 0.10
• Standard seals: NBR
30 6 31.5 31.5 42 288 576 110 110 130 1.00
• Optional seals: FKM, EPDM or more 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Connection under pressure: allowed (both male
or female side)
• Austauschbarkeit: Voswinkel RH/RK

• Ausführung: Zn-Ni
• Gewinde: BSP - METRISCHE
• Kuppeln unter Druck: erlaubt (Steckerseite oder
Muffeseite)
• Interchangeabilité: Voswinkel RH/RK

• Traitement: Zn-Ni
• Taraudage: BSP - METRIQUES
• Connexion sous pression: possible (côté male
ou femelle)

PRH3
PRH3 DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 68 67 BSP 3/8" DIN 3852-2-X PRH3.1010.112 290 42 PRH3.1010.113 362 30
AG 3 64 63 10 08L M14x1.5 ISO 8434-1-L PRH3.1014.302 258 42 PRH3.1014.303 342 30
58 10 08L M14x1.5 ISO 8434-1-L PRH3.1014.302 VS 238 42
65 64 11 10L M16x1.5 ISO 8434-1-L PRH3.1016.302 259 42 PRH3.1016.303 344 30
59 11 10L M16x1.5 ISO 8434-1-L PRH3.1016.302 VS 241 42
65 64 11 12L M18x1.5 ISO 8434-1-L PRH3.1018.302 259 42 PRH3.1018.303 345 30
59 11 12L M18x1.5 ISO 8434-1-L PRH3.1018.302 VS 242 42
66 65 12 15L M22x1.5 ISO 8434-1-L PRH3.1022.302 267 42 PRH3.1022.303 353 30
60 12 15L M22x1.5 ISO 8434-1-L PRH3.1022.302 VS 251 42
66 65 12 10S M18x1.5 ISO 8434-1-S PRH3.1018.402 265 42 PRH3.1018.403 350 30
60 12 10S M18x1.5 ISO 8434-1-S PRH3.1018.402 VS 247 42
66 65 12 12S M20x1.5 ISO 8434-1-S PRH3.1020.402 267 42 PRH3.1020.403 352 30
60 12 12S M20x1.5 ISO 8434-1-S PRH3.1020.402 VS 250 42
68 67 14 14S M22x1.5 ISO 8434-1-S PRH3.1022.402 272 42 PRH3.1022.403 358 30
62 14 14S M22x1.5 ISO 8434-1-S PRH3.1022.402 VS 257 42
68 67 14 16S M24x1.5 ISO 8434-1-S PRH3.1024.402 276 42 PRH3.1024.403 361 30
62 14 16S M24x1.5 ISO 8434-1-S PRH3.1024.402 VS 260 42
THREADS
IG 1 AG 3

PRH3
PRH3 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 74 75.4 BSP 1/2" DIN 3852-2-X PRH3.1313.112 412 32 PRH3.1313.113 492 24
AG 3 72 73.4 12 15L M22x1.5 ISO 8434-1-L PRH3.1322.302 379 32 PRH3.1322.303 476 24
74 75.4 14 16S M24x1.5 ISO 8434-1-S PRH3.1324.402 387 32 PRH3.1324.403 485 24
(g) (pcs.) (g) (pcs.)
IG 1 93 86 BSP 3/4" DIN 3852-2-X PRH3.2019.112 VS 798 18 PRH3.2019.113 835 13
AG 3 95 84 12 15L M22x1.5 ISO 8434-1-L PRH3.2022.302 812 18 PRH3.2022.303 798 13
81 12 15L M22x1.5 ISO 8434-1-L PRH3.2022.302 VS 710 18
95 84 12 18L M26x1.5 ISO 8434-1-L PRH3.2026.302 807 18 PRH3.2026.303 805 13
81 12 18L M26x1.5 ISO 8434-1-L PRH3.2026.302 VS 703 18
97 86 14 16S M24x1.5 ISO 8434-1-S PRH3.2024.402 820 18 PRH3.2024.403 799 13
83 14 16S M24x1.5 ISO 8434-1-S PRH3.2024.402 VS 710 18
99 88 16 20S M30x2 ISO 8434-1-S PRH3.2030.402 822 18 PRH3.2030.403 817 13
85 16 20S M30x2 ISO 8434-1-S PRH3.2030.402 VS 724 18
THREADS
IG 1 AG 3

PRH3
(g) (pcs.) (g) (pcs.)
IG 1 101 107 BSP 1" DIN 3852-2-X PRH3.2525.112 1064 13 PRH3.2525.113 1333 12
AG 3 101 117.5 12 18L M26x1.5 ISO 8434-1-L PRH3.2526.302 1059 13 PRH3.2526.303 1324 12
96 12 18L M26x1.5 ISO 8434-1-L PRH3.2526.302 VS 1005 13
103 119.5 14 22L M30x2 ISO 8434-1-L PRH3.2530.302 1050 13 PRH3.2530.303 1314 12
98 14 22L M30x2 ISO 8434-1-L PRH3.2530.302 VS 1000 13
103 119.5 14 28L M36x2 ISO 8434-1-L PRH3.2536.302 1033 13 PRH3.2536.303 1309 12
98 14 28L M36x2 ISO 8434-1-L PRH3.2536.302 VS 990 13
105 121.5 16 20S M30x2 ISO 8434-1-S PRH3.2530.402 1074 13 PRH3.2530.403 1336 12
101 16 20S M30x2 ISO 8434-1-S PRH3.2530.402 VS 1034 13
107 123.5 18 25S M36x2 ISO 8434-1-S PRH3.2536.402 1074 13 PRH3.2536.403 1348 12
103 18 25S M36x2 ISO 8434-1-S PRH3.2536.402 VS 1043 13
109 125.5 20 30S M42x2 ISO 8434-1-S PRH3.2542.402 1082 13 PRH3.2542.403 1361 12
105 20 30S M42x2 ISO 8434-1-S PRH3.2542.403 VS 1050 13
THREADS
IG 1 AG 3

PRH3
PRH3 DN30 - BG 6 - ISO 31.5
(g) (pcs.) (g) (pcs.)
IG 1 132 148 1"¼ BSP DIN 3852-2-X PRH3.3031.112 3174 4 PRH3.3031.113 3267 4
AG 3 132 136 16 35L M45x2 ISO 8434-1-L PRH3.3045.302 3111 4 PRH3.3045.303 2937 4
129 16 35L M45x2 ISO 8434-1-L PRH3.3045.302 VS 3108 4
138 136 22 38S M52x2 ISO 8434-1-S PRH3.3052.402 3193 4 PRH3.3052.403 2921 4
132 22 38S M52x2 ISO 8434-1-S PRH3.3052.402 VS 3158 4
THREADS
IG 1 AG 3

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PRH3

10 2 10 SPRH.10002 35 184 36 9 SPRH.10003 38 185 30 14 Polyetylene
13 3 12.5 SPRH.13002 45 185 30 14 SPRH.13003 42 186 40 16 Polyetylene
20 4 19 SPVV.25002 54 190 41 23 SPVV.25003 55 190 41 20 Polyetylene

20 4 19 SPRH.20202 60 275 47.5 115 SPRH.20203 60 275 47.5 122 Aluminum
25 5 25 SPRH.25202 65 275 47.5 144 SPRH.25203 65 275 47.5 158 Aluminum
30 6 31.5 SPRH.30202 90 275 47.5 280 SPRH.30203 90 275 47.5 400 Aluminum
SPARE PARTS NOMINAL SIZE FEMALE GASKET

DNP BG ISO OR-I (NBR*) BK (PTFE)
10 2 10 PVV.010.120 PVV.010.130
13 3 12.5 PRH.013.120 PRH.013.130
20 4 19 PVV.013.121 PRH.019.130
25 5 25 PTV.019.120 PRH.025.130
30 6 31.5 PRH.031.120 PRH.031.130
*AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER EPDM O ‘V’ PER VITON

PBV1
ISO B
ACCIAIO
STEEL
STAHL
ACIER
• Norma: ISO 7241 B

• Occlusione: valvola
• Filettature: BSP - NPT- SAE
• Guarnizioni opzionali: FKM, FFKM, EPDM o altro Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E 04 0 5 4.2 50 3 9 240 230 270 0.5

06 1 6.3 6.5 25 12 24 110 180 100 1
• Standard: ISO 7241 B
• Occlusion: poppet 10 2 10 8.5 25 23 46 140 140 130 2.4
• Locking: radial balls 13 3 12.5 10.5 25 45 90 110 140 110 3.9
• Material: steel 20 4 20 15.8 25 106 220 100 130 120 11
25 5 25 17.3 25 189 260 100 110 100 19
• Threads: BSP - NPT- SAE
39 7 40 36 20 379 757 80 80 80 95
• Working temperature: -25 °C +100 °C 50 8 50 50 10 757 1000 40 40 40 170
• Optional seals: FKM, FFKM, EPDM or more 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Norm: ISO 7241 B

• Verschluss: ventil
• Gewinde: BSP - NPT- SAE
• Dichtungen nach Wahl:
FKM, FFKM, EPDM, usw.
• Norme: ISO 7241 B

• Obturation: clapet
• Taraudage: BSP - NPT- SAE
• Joints facultatifs: FKM, FFKM, EPDM, ect.

PBV1
PBV1 DN04 - BG 0 - ISO 5

(g) (pcs.) (g) (pcs.)
BSP 1/8" DIN 3852-2-X PBV1.0404.002 89 160 PBV1.0404.003 20 500
NPT 1/8" ANSI B1.20.3 PBV1.0404.012 89 160 PBV1.0404.013 20 500
PBV1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PBV1.0606.002 123 100 PBV1.0606.003 39 300
NPT 1/4" ANSI B1.20.3 PBV1.0606.012 124 100 PBV1.0606.013 40 300
BSP 1/4" DIN 3852-2-X PBV4.0606.002 133 80
NPT 1/4" ANSI B1.20.3 PBV4.0606.012 134 80

PBV1
CH3 L3 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
22 42.5 BSP 3/8" DIN 3852-2-X PBV1.1010.002 194 54 PBV1.1010.003 61 200
22 42.5 NPT 3/8" ANSI B1.20.3 PBV1.1010.012 196 54 PBV1.1010.013 62 200
27 46 3/4"-16 UNF 2B SAE J 1926-1 PBV1.1019.033 82 150
22 42.5 BSP 3/8" DIN 3852-2-X PBV4.1010.002 198 40
22 42.5 NPT 3/8" ANSI B1.20.3 PBV4.1010.012 200 40
PBV1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PBV1.1313.002 346 45 PBV1.1313.003 112 200
NPT 1/2" ANSI B1.20.3 PBV1.1313.012 349 45 PBV1.1313.013 115 200
BSP 1/2" DIN 3852-2-X PBV4.1313.002 373 30
NPT 1/2" ANSI B1.20.3 PBV4.1313.012 376 30

PBV1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PBV1.2019.002 548 25 PBV1.2019.003 202 45
NPT 3/4" ANSI B1.20.3 PBV1.2019.012 551 25 PBV1.2019.013 207 45
BSP 3/4" DIN 3852-2-X PBV4.2019.002 593 20
NPT 3/4" ANSI B1.20.3 PBV4.2019.012 596 20

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PBV1.2525.002 860 18 PBV1.2525.003 355 30
NPT 1" ANSI B1.20.3 PBV1.2525.012 870 18 PBV1.2525.013 364 30
BSP 1" DIN 3852-2-X PBV4.2525.002 990 15
NPT 1" ANSI B1.20.3 PBV4.2525.012 1000 15

PBV1
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1"¼ DIN 3852-2-X PBV1.3931.002 2132 9 PBV1.3931.003 1340 12
NPT 1"¼ ANSI B1.20.3 PBV1.3931.012 2147 9 PBV1.3931.013 1355 12
BSP 1"½ DIN 3852-2-X PBV1.3939.002 2050 9 PBV1.3939.003 1258 12
NPT 1"½ ANSI B1.20.3 PBV1.3939.012 2066 9 PBV1.3939.013 1274 12
IG 2 1"5/8-12 UN 2B SAE J 1926-1 PBV1.3941.032 2139 9 PBV1.3941.033 1347 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PBV1.5051.002 4900 4 PBV1.5051.003 3100 5
NPT 2" ANSI B1.20.3 PBV1.5051.012 5000 4 PBV1.5051.013 3200 5
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PBV1

06 1 6.3 SPBV.06032 28 125 21 8 SPBV.06033 28 125 17 8 PVC
10 2 10 SPBV.10032 33 135 25 10 SPBV.10033 33 130 20 13 PVC
13 3 12.5 SPBV.13032 44 175 32 16 SPBV.13033 40 165 24 20 PVC
20 4 20 SPBV.20032 52 190 37 23 SPBV.20033 44 190 31 27 PVC
25 5 25 SPBV.25032 61 230 43 30 SPBV.25033 53 230 37 40 PVC
NOMINAL SIZE FEMALE DUST PLUG MALE DUST CAP COLOR MATERIAL

06 1 6.3 SPBV.06002 26 240 23 9 SPBV.06003 18 240 23 9 PVC
06 1 6.3 SPBV.06042 26 240 23 9 SPBV.06043 18 240 23 9 PVC
10 2 10 SPBV.10002 33 235 25 9 SPBV.10003 23 240 24 10 PVC
13 3 12.5 SPBV.13002 38 240 29 15 SPBV.13003 29 245 28 13 PVC
20 4 20 SPBV.20002 49 240 38 17 SPBV.20003 36 245 38 16 PVC
25 5 25 SPBV.25002 60 245 46 24 SPBV.25003 44 235 44 19 PVC
06 1 6.3 SPBV.06202 22 210 30 15 SPBV.06203 22 245 28 32 Aluminum

06 1 6.3 - - - - - SPBV.06303 21 260 19 49 AISI 316
10 2 10 SPBV.10202 22 155 30 18 SPBV.10203 27 155 30 34 Aluminum
39 7 40 SPBV.39202 79 225 70.5 139 SPBV.39203 64.5 225 70.5 293 Aluminum
SPARE PARTS
NOMINAL SIZE FEMALE GASKET * AL CODICE DELLA GUARNIZIONE IN NBR
DNP BG ISO OR (NBR*) BK (PTFE) AGGIUNGERE ‘E’ PER EPDM O ‘V’ PER VITON
* TO THE NBR GASKET CODE ADD ‘E’ FOR EPDM OR
04 0 5 PBV.004.120 PBV.004.130 ‘V’ FOR VITON
06 1 6.3 PBV.006.120 PBV.006.130 * ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN
SIE ‘E’ FUER EPDM ODER ‘V’ FUER VITON AN
10 2 10 PDV.010.120 PBV.010.130
* AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR
13 3 12.5 PBV.013.120 PBV.013.130 EPDM OU ‘V’ POUR VITON
20 4 20 PBV.019.120 PBV.019.130
25 5 25 PBV.025.120 PBV.025.130
39 7 40 PBV.039.120 -
50 8 50 PBV.050.120 -

PBV1 BOP
ISO B
ACCIAIO
STEEL
STAHL
ACIER

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max

• Approval: API 16D 13 3 12.5 10.5 25 45 90 110 140 110 3.9
• Occlusion: poppet 20 4 20 15.8 25 106 220 100 130 120 11
• Locking: radial balls 25 5 25 17.3 25 189 260 100 110 100 19
• Material: steel
1 MPa = 145.04 psi • 1 l = 0.264 gal



PBV1 BOP
PBV1 BOP DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PBV4.1313.002 BOP 373 24 PBV1.1313.003 BOP 112 72
NPT 1/2" ANSI B1.20.3 PBV4.1313.012 BOP 376 24 PBV1.1313.013 BOP 115 72
PBV1 BOP DN20 - BG 4 - ISO 20

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PBV4.2019.002 BOP 593 12 PBV1.2019.003 BOP 202 72
NPT 3/4" ANSI B1.20.3 PBV4.2019.012 BOP 596 12 PBV1.2019.013 BOP 207 72
PBV1 BOP DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PBV4.2525.002 BOP 990 12 PBV1.2525.003 BOP 355 24
NPT 1" ANSI B1.20.3 PBV4.2525.012 BOP 1000 12 PBV1.2525.013 BOP 364 24

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PBV1 BOP

13 3 12.5 SPBV.13032 44 175 32 16 SPBV.13033 40 165 24 20 PVC
20 4 20 SPBV.20032 52 190 37 23 SPBV.20033 44 190 31 27 PVC
25 5 25 SPBV.25032 61 230 43 30 SPBV.25033 53 230 37 40 PVC

13 3 12.5 SPBV.13002 38 240 29 15 SPBV.13003 29 245 28 13 PVC
20 4 20 SPBV.20002 49 240 38 17 SPBV.20003 36 245 38 16 PVC
25 5 25 SPBV.25002 60 245 46 24 SPBV.25003 44 235 44 19 PVC


PBVM
ISO B
OTTONE
BRASS
MESSING
LAITON

• Materiale: ottone
• Finitura: nichelatura su richiesta
• Guarnizioni opzionali: FFKM, EPDM o altro Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
04 0 5 4.2 30 3 9 120 190 150 0.5

Technical data E
06 1 6.3 6.5 20 12 24 80 80 120 1
10 2 10 8.5 20 23 46 80 85 95 2.4
• Occlusion: poppet
• Material: brass 20 4 20 15.8 13 106 220 55 65 80 11

• Finishing: nickel-plating on request 25 5 25 17.3 13 189 260 55 70 60 19
• Threads: BSP - NPT 39 7 40 36 6 379 757 25 25 25 95
50 8 50 50 5 757 1000 20 20 20 170
• Optional seals: FFKM, EPDM or more 1 MPa = 145.04 psi • 1 l = 0.264 gal


• Werkstoff: Messing
• Ausführung: Nichelüberzug auf Wunsch

• Matériel: laiton
• Traitement: nickelage sur demande

PBVM
PBVM DN04 - BG 0 - ISO 5

(g) (pcs.) (g) (pcs.)
BSP 1/8" DIN 3852-2-X PBVM.0404.002 96 160 PBVM.0404.003 22 500
NPT 1/8" ANSI B1.20.3 PBVM.0404.012 96 160 PBVM.0404.013 22 500
PBVM DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)

PBVM
PBVM DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PBVM.2525.002 938 18 PBVM.2525.003 392 30
NPT 1" ANSI B1.20.3 PBVM.2525.012 950 18 PBVM.2525.013 403 30

PBVM

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PBVM.3931.002 2265 9 PBVM.3931.003 1420 12
NPT 1"¼ ANSI B1.20.3 PBVM.3931.012 2280 9 PBVM.3931.013 1435 12
BSP 1"½ DIN 3852-2-X PBVM.3939.002 2180 9 PBVM.3939.003 1335 12
NPT 1"½ ANSI B1.20.3 PBVM.3939.012 2200 9 PBVM.3939.013 1355 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PBVM.5051.002 5320 4 PBVM.5051.003 3470 5
NPT 2" ANSI B1.20.3 PBVM.5051.012 5370 4 PBVM.5051.013 3520 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PBVM

06 1 6.3 SPBV.06032 28 125 21 8 SPBV.06033 28 125 17 8 PVC
10 2 10 SPBV.10032 33 135 25 10 SPBV.10033 33 130 20 13 PVC
13 3 12.5 SPBV.13032 44 175 32 16 SPBV.13033 40 165 24 20 PVC
20 4 20 SPBV.20032 52 190 37 23 SPBV.20033 44 190 31 27 PVC
25 5 25 SPBV.25032 61 230 43 30 SPBV.25033 53 230 37 40 PVC
06 1 6.3 SPBV.06002 26 240 23 9 SPBV.06003 18 240 23 9 PVC

06 1 6.3 SPBV.06042 26 240 23 9 SPBV.06043 18 240 23 9 PVC
10 2 10 SPBV.10002 33 235 25 9 SPBV.10003 23 240 24 10 PVC
13 3 12.5 SPBV.13002 38 240 29 15 SPBV.13003 29 245 28 13 PVC
20 4 20 SPBV.20002 49 240 38 17 SPBV.20003 36 245 38 16 PVC
25 5 25 SPBV.25002 60 245 46 24 SPBV.25003 44 235 44 19 PVC

06 1 6.3 - - - - - SPBV.06303 21 260 19 49 AISI 316

04 0 5 PBV.004.120 V PBV.004.130
06 1 6.3 PBV.006.120 V PBV.006.130
10 2 10 PDV.010.120 V PBV.010.130
13 3 12.5 PBV.013.120 V PBV.013.130
20 4 20 PBV.019.120 V PBV.019.130
25 5 25 PBV.025.120 V PBV.025.130
39 7 40 PBV.039.120 V -
50 8 50 PBV.050.120 V -

PBVX
ISO B
ACCIAIO INOX
STAINLESS STEEL
EDELSTAHL
ACIER INOX

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
04 0 5 4.2 40 3 9 210 200 140 0.5

Technical data E
06 1 6.3 6.5 35 12 24 170 150 160 1
• Standard: ISO 7241 B 10 2 10 8.5 30 23 46 110 110 210 2.4
13 3 12.5 10.5 30 45 90 150 140 150 3.9
20 4 20 15.8 22 106 220 100 90 100 11
• Threads: BSP - NPT 25 5 25 17.3 20 189 260 60 65 85 19
• Standard seals: FKM 39 7 40 36 8 379 757 25 25 25 95
• Working temperature: -25 °C +200 °C 50 8 50 50 6 757 1000 20 20 20 170
• Optional seals: FFKM, EPDM or more
1 MPa = 145.04 psi • 1 l = 0.264 gal



PBVX
PBVX DN04 - BG 0 - ISO 5

(g) (pcs.) (g) (pcs.)
BSP 1/8" DIN 3852-2-X PBVX.0404.002 78 160 PBVX.0404.003 19 500
NPT 1/8" ANSI B1.20.3 PBVX.0404.012 78 160 PBVX.0404.013 19 500
PBVX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
PBVX DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)

PBVX

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PBVX.2525.002 908 18 PBVX.2525.003 342 30
NPT 1" ANSI B1.20.3 PBVX.2525.012 918 18 PBVX.2525.013 352 30

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PBVX.3931.002 2088 9 PBVX.3931.003 1357 12
NPT 1"¼ ANSI B1.20.3 PBVX.3931.012 2100 9 PBVX.3931.013 1370 12
BSP 1"½ DIN 3852-2-X PBVX.3939.002 2005 9 PBVX.3939.003 1274 12
NPT 1"½ ANSI B1.20.3 PBVX.3939.012 2022 9 PBVX.3939.013 1291 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PBVX.5051.002 5170 4 PBVX.5051.003 3400 5
NPT 2" ANSI B1.20.3 PBVX.5051.012 5180 4 PBVX.5051.013 3410 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PBVX

06 1 6.3 SPBV.06032 28 125 21 8 SPBV.06033 28 125 17 8 PVC
10 2 10 SPBV.10032 33 135 25 10 SPBV.10033 33 130 20 13 PVC
13 3 12.5 SPBV.13032 44 175 32 16 SPBV.13033 40 165 24 20 PVC
20 4 20 SPBV.20032 52 190 37 23 SPBV.20033 44 190 31 27 PVC
25 5 25 SPBV.25032 61 230 43 30 SPBV.25033 53 230 37 40 PVC
06 1 6.3 SPBV.06002 26 240 23 9 SPBV.06003 18 240 23 9 PVC

06 1 6.3 SPBV.06042 26 240 23 9 SPBV.06043 18 240 23 9 PVC
10 2 10 SPBV.10002 33 235 25 9 SPBV.10003 23 240 24 10 PVC
13 3 12.5 SPBV.13002 38 240 29 15 SPBV.13003 29 245 28 13 PVC
20 4 20 SPBV.20002 49 240 38 17 SPBV.20003 36 245 38 16 PVC
25 5 25 SPBV.25002 60 245 46 24 SPBV.25003 44 235 44 19 PVC

06 1 6.3 - - - - - SPBV.06303 21 260 19 49 AISI 316

04 0 5 PBV.004.120 V PBV.004.130
06 1 6.3 PBV.006.120 V PBV.006.130
10 2 10 PDV.010.120 V PBV.010.130
13 3 12.5 PBV.013.120 V PBV.013.130
20 4 20 PBV.019.120 V PBV.019.130
25 5 25 PBV.025.120 V PBV.025.130
39 7 40 PBV.039.120 V -
50 8 50 PBV.050.120 V -

PBOX
ISO B
PASSAGGIO LIBERO/INOX
FREE FLOW/STAINLESS STEEL
FREIER DURCHLAUF/EDELSTAHL
PASSAGE LIBRE/ACIER INOX

• Occlusione: passaggio libero
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Standard: ISO 7241 B 06 1 6.3 11 35 45 90 - - 160 -
• Occlusion: free flow
10 2 10 15 35 106 220 - - 210 -
• Material: stainless steel AISI 316 13 3 12.5 19 35 189 380 - - 150 -
• Threads: BSP - NPT 20 4 20 24 25 288 560 - - 100 -
• Standard seals: FKM 25 5 25 29 20 379 760 - - 88 -
39 7 40 38 8 757 1000 - - 25 -
50 8 50 53 6 1000 1500 - - 20 -
1 MPa = 145.04 psi • 1 l = 0.264 gal

• Verschluss: freier Durchlauf

• Obturation: passage libre

PBOX
PBOX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PBOX.0606.002 81 100 PBOX.0606.003 33 100
NPT 1/4" ANSI B1.20.3 PBOX.0606.012 82 100 PBOX.0606.013 34 100
PBOX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
PBOX DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)

PBOX

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PBOX.2525.002 519 30 PBOX.2525.003 256 30
NPT 1" ANSI B1.20.3 PBOX.2525.012 525 30 PBOX.2525.013 262 30

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PBOX.3931.002 1476 9 PBOX.3931.003 616 8
NPT 1"¼ ANSI B1.20.3 PBOX.3931.012 1488 9 PBOX.3931.013 628 8
BSP 1"½ DIN 3852-2-X PBOX.3939.002 1390 9 PBOX.3939.003 539 8
NPT 1"½ ANSI B1.20.3 PBOX.3939.012 1405 9 PBOX.3939.013 554 8

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PBOX.5051.002 3110 4 PBOX.5051.003 938 5
NPT 2" ANSI B1.20.3 PBOX.5051.012 3150 4 PBOX.5051.013 980 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PBOX

06 1 6.3 SPBV.06032 28 125 21 8 SPBV.06033 28 125 17 8 PVC
10 2 10 SPBV.10032 33 135 25 10 SPBV.10033 33 130 20 13 PVC
13 3 12.5 SPBV.13032 44 175 32 16 SPBV.13033 40 165 24 20 PVC
20 4 20 SPBV.20032 52 190 37 23 SPBV.20033 44 190 31 27 PVC
25 5 25 SPBV.25032 61 230 43 30 SPBV.25033 53 230 37 40 PVC
06 1 6.3 SPBV.06002 26 240 23 9 SPBV.06003 18 240 23 9 PVC

06 1 6.3 SPBV.06042 26 240 23 9 SPBV.06043 18 240 23 9 PVC
10 2 10 SPBV.10002 33 235 25 9 SPBV.10003 23 240 24 10 PVC
13 3 12.5 SPBV.13002 38 240 29 15 SPBV.13003 29 245 28 13 PVC
20 4 20 SPBV.20002 49 240 38 17 SPBV.20003 36 245 38 16 PVC
25 5 25 SPBV.25002 60 245 46 24 SPBV.25003 44 235 44 19 PVC

06 1 6.3 - - - - - SPBV.06303 21 260 19 49 AISI 316

06 1 6.3 PBV.006.120 V PBV.006.130

10 2 10 PDV.010.120 V PBV.010.130
13 3 12.5 PBV.013.120 V PBV.013.130
20 4 20 PBV.019.120 V PBV.019.130
25 5 25 PBV.025.120 V PBV.025.130
39 7 40 PBV.039.120 V -
50 8 50 PBV.050.120 V -

PAV1
ISO A
ACCIAIO
STEEL
STAHL
ACIER
• Norma: ISO 7241 A

• Filettature: BSP - NPT - RC - SAE
Min burst pressure
• Guarnizioni opzionali: FKM, FFKM, EPDM o altro
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 5 35 12 17 150 170 140 0.5

Technical data E 10 2 10 8.5 35 23 46 140 150 150 1.9
• Standard: ISO 7241 A 13 3 12.5 10.5 25 45 90 100 140 120 2.7
• Occlusion: poppet 20 4 20 15.8 25 106 190 90 150 100 9.3
25 5 25 17.3 25 189 280 130 130 120 16
• Material: steel
• Finishing: Zn-Fe (Cr III) 30 6 31.5 22.8 20 288 480 110 85 100 30
• Threads: BSP - NPT - RC - SAE 39 7 40 29.9 19 379 757 80 80 82 54
• Standard seals: NBR 50 8 50 37.7 16 757 1000 65 96 100 120
• Optional seals: FKM, FFKM, EPDM or more
• Norm: ISO 7241 A

• Gewinde: BSP - NPT - RC - SAE
• Norme: ISO 7241 A

• Taraudage: BSP - NPT - RC - SAE

PAV1
PAV1 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/4" DIN 3852-2-X PAV1.0606.002 106 180 PAV1.0606.003 37 300
NPT 1/4" ANSI B1.20.3 PAV1.0606.012 107 180 PAV1.0606.013 38 300
RC 1/4" UNI ISO 7/1 PAV1.0606.042 107 180 PAV1.0606.043 38 300
IG 2 9/16"-18 UNF 2B SAE J 1926-1 PAV1.0615.032 102 180 PAV1.0615.033 34 300
PAV1 DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
NPT 3/8" ANSI B1.20.3 PAV1.1010.012 156 100 PAV1.1010.013 60 200
RC 3/8" UNI ISO 7/1 PAV1.1010.042 156 100 PAV1.1010.043 60 200
IG 2 9/16"-18 UNF 2B SAE J 1926-1 PAV3.1015.032 175 100 See PPV3 DN10
3/4"-16 UNF 2B SAE J 1926-1 PAV1.1019.032 184 100 PAV1.1019.033 63 200
THREADS
IG 1 IG 2

PAV1
PAV1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PAV4.1313.003 94 200
NPT 1/2" ANSI B1.20.3 PAV1.1313.012 269 50 PAV1.1313.013 98 200
RC 1/2" UNI ISO 7/1 PAV1.1313.042 269 50 PAV1.1313.043 98 200
NPT 3/4" ANSI B1.20.3 PAV1.1319.012 353 50 See PKV
IG 2 M22x1,5 SAE J 2244/1 PAV1.1322.102 260 50 PAV1.1322.103 90 200
3/4"-16 UNF 2B SAE J 1926-1 PAV1.1319.032 274 50 PAV4.1319.033 101 200
7/8"-14 UNF 2B SAE J 1926-1 PAV1.1323.032 260 50 See PKV
PAV6 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PAV6.1313.002 292 50 See PAV1 DN13
NPT 1/2" ANSI B1.20.3 PAV6.1313.012 294 50 See PAV1 DN13
IG 2 7/8"-14 UNF 2B SAE J 1926-1 PAV6.1323.032 290 50 See PKV

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PAV1.2019.002 428 28 PAV1.2019.003 180 45
NPT 3/4" ANSI B1.20.3 PAV1.2019.012 434 28 PAV1.2019.013 186 45
RC 3/4" UNI ISO 7/1 PAV1.2019.042 434 28 PAV1.2019.043 186 45
THREADS
IG 1 IG 2

PAV1

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PAV1.2525.002 700 20 PAV1.2525.003 304 30
NPT 1" ANSI B1.20.3 PAV1.2525.012 708 20 PAV1.2525.013 313 30
RC 1" UNI ISO 7/1 PAV1.2525.042 708 20 PAV1.2525.043 313 30
PAV1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PAV1.3031.002 1515 12 PAV1.3031.003 559 20
NPT 1"¼ ANSI B1.20.3 PAV1.3031.012 1532 12 PAV1.3031.013 572 20
RC 1"¼ UNI ISO 7/1 PAV1.3031.042 1532 12 PAV1.3031.043 572 20

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PAV1.3939.002 2445 8 PAV1.3939.003 918 12
NPT 1"½ ANSI B1.20.3 PAV1.3939.012 2464 8 PAV1.3939.013 938 12
RC 1"½ UNI ISO 7/1 PAV1.3939.042 2464 8 PAV1.3939.043 938 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PAV1.5051.002 5000 5 PAV1.5051.003 1804 8
NPT 2" ANSI B1.20.3 PAV1.5051.012 5010 5 PAV1.5051.013 1820 8
RC 2" UNI ISO 7/1 PAV1.5051.042 5010 5 PAV1.5051.043 1820 8

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PAV1
06 1 6.3 SPAV.06002 24 127 19.5 7 SPAV.06003 24.5 123 18 9 PVC

10 2 10 SPAV.10002 28 220 22 14 SPAV.10003 23.5 220 22 16 PVC
10 2 10 SPAV.10022 28 220 22 14 SPAV.10023 23.5 220 22 16 PVC
10 2 10 SPAV.10032 28 220 22 14 SPAV.10033 23.5 220 22 16 PVC
10 2 10 SPAV.10042 28 220 22 14 SPAV.10043 23.5 220 22 16 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC
25 5 25 SPAV.25002 54 235 41 46 SPAV.25003 49 235 41 53 PVC
06 1 6.3 SPAV.06202 19 160 30 11 SPAV.06203 19 180 30 18 Aluminum

10 2 10 SPAV.10202 30 200 33 42 SPAV.10203 30 200 33 50 Aluminum
SPARE PARTS NOMINAL SIZE FEMALE GASKET *AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’
PER EPDM O ‘V’ PER VITON
*TO THE NBR GASKET CODE ADD ‘E’ FOR EPDM OR ‘V’ FOR
06 1 6.3 PAV.006.120 PAV.006.130 VITON
10 2 10 PAV.010.120 PAV.010.130 *ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’
FUER EPDM ODER ‘V’ FUER VITON AN
13 3 12.5 PAV.013.120 PAV.013.130 *AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU
20 4 20 PAV.019.120 PAV.019.130 ‘V’ POUR VITON
25 5 25 PAV.025.120 PAV.025.130
30 6 31.5 PAV.030.120 PAV.030.130
39 7 40 PAV.039.120 PAV.039.130
50 8 50 PAV.050.120 PAV.050.130

PAO1-PAOC
ISO A
PASSAGGIO LIBERO/ACCIAIO
FREE FLOW/STEEL
FREIER DURCHLAUF/STAHL
PASSAGE LIBRE/ACIER

• Finitura: Zn-Fe (PAO1) / cromatura (PAOC)
• Filettature: BSP - NPT - RC
• Guarnizioni standard:
NBR (PAO1) / FKM (PAOC) PAO1
• Temperatura d’esercizio:
(PAO1) -25 °C +100 °C Min burst pressure
Max working
(PAOC) -25 °C +200 °C
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Pressioni di esercizio: 250-350 bar Nominal size

Technical data E
06 1 6.3 5.5 35 12 24 - - 140 -
• Standard: ISO 7241 A
10 2 10 9 35 23 46 - - 150 -
• Occlusion: free flow
13 3 12.5 11.5 30 45 90 - - 120 -
• Material: steel 20 4 20 16.5 25 106 220 - - 100 -
• Finishing: Zn-Fe (PAO1) / chroming (PAOC) 25 5 25 19 25 189 380 - - 100 -
• Threads: BSP - NPT - RC 30 6 31.5 24.5 25 288 580 - - 100 -
• Standard seals: NBR (PAO1) / FKM (PAOC)
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Working temperature:
(PAO1) -25 °C +100 °C
(PAOC) -25 °C +200 °C PAOC
• Working pressure: 250-350 bar Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Technische Merkmale D Nominal size
• Norm: ISO 7241 A DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Verschluss: freier Durchlauf 10 2 10 13 35 45 90 - - 150 -

• Kupplung: Radial Kugeln 13 3 12.5 17.2 30 189 380 - - 120 -
20 4 20 23.2 25 288 580 - - 100 -
• Ausführung:Zn-Fe(PAO1)/Verchromung(PAOC)
25 5 25 28.2 25 379 760 - - 100 -
• Gewinde: BSP - NPT - RC
• Standard-Dichtungen: 1 MPa = 145.04 psi • 1 l = 0.264 gal
NBR (PAO1) / FKM (PAOC)

• Betriebstemperatur:
(PAO1) -25 °C +100 °C
(PAOC) -25 °C +200 °C
• Dichtungen nach Wahl:FKM,FFKM,EPDM,usw.

• Traitement: Zn-Fe (PAO1) /chromage (PAOC)
• Taraudage: BSP - NPT - RC
• Joints standard: NBR (PAO1) / FKM (PAOC)
• Température de service:
(PAO1) -25 °C +100 °C
(PAOC) -25 °C +200 °C

PAO1-PAOC
PAO1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PAO1.0606.002 102 180 PAO1.0606.003 33 300
NPT 1/4" ANSI B1.20.3 PAO1.0606.012 103 180 PAO1.0606.013 34 300
RC 1/4" UNI ISO 7/1 PAO1.0606.042 103 180 PAO1.0606.043 34 300
PAO1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PAO1.1010.002 146 100 PAO1.1010.003 50 200
NPT 3/8" ANSI B1.20.3 PAO1.1010.012 147 100 PAO1.1010.013 51 200
RC 3/8" UNI ISO 7/1 PAO1.1010.042 147 100 PAO1.1010.043 51 200
PAOC DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PAOC.1010.002 145 100 PAOC.1010.003 49 200

PAO1-PAOC
PAO1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PAO1.1313.002 250 50 PAO1.1313.003 80 200
NPT 1/2" ANSI B1.20.3 PAO1.1313.012 251 50 PAO1.1313.013 81 200
RC 1/2" UNI ISO 7/1 PAO1.1313.042 251 50 PAO1.1313.043 81 200
IG 2 M22x1.5 SAE J 2244/1 PAO1.1322.102 243 50 PAO1.1322.103 73 200
PAOC DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PAO1.2019.002 396 28 PAO1.2019.003 149 45
NPT 3/4" ANSI B1.20.3 PAO1.2019.012 400 28 PAO1.2019.013 153 45
RC 3/4" UNI ISO 7/1 PAO1.2019.042 400 28 PAO1.2019.043 153 45
THREADS
IG 1 IG 2

PAO1-PAOC

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PAO1.2525.002 640 20 PAO1.2525.003 243 30
NPT 1" ANSI B1.20.3 PAO1.2525.012 649 20 PAO1.2525.013 252 30
RC 1" UNI ISO 7/1 PAO1.2525.042 649 20 PAO1.2525.043 252 30

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PAOC.2525.002 631 20 PAOC.2525.003 234 30
PAO1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PAO1.3031.002 1381 12 PAO1.3031.003 425 20
NPT 1"¼ ANSI B1.20.3 PAO1.3031.012 1392 12 PAO1.3031.013 436 20
RC 1"¼ UNI ISO 7/1 PAO1.3031.042 1392 12 PAO1.3031.043 436 20

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PAO1-PAOC
06 1 6.3 SPAV.06002 24 127 19.5 7 SPAV.06003 24.5 123 18 9 PVC

10 2 10 SPAV.10002 28 220 22 14 SPAV.10003 23.5 220 22 16 PVC
10 2 10 SPAV.10022 28 220 22 14 SPAV.10023 23.5 220 22 16 PVC
10 2 10 SPAV.10032 28 220 22 14 SPAV.10033 23.5 220 22 16 PVC
10 2 10 SPAV.10042 28 220 22 14 SPAV.10043 23.5 220 22 16 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC
25 5 25 SPAV.25002 54 235 41 46 SPAV.25003 49 235 41 53 PVC

SPARE PARTS NOMINAL SIZE PAO1 FEMALE GASKET PAOC FEMALE GASKET
DNP BG ISO OR (NBR*) BK (PTFE) OR (FKM) BK (PTFE)
06 1 6.3 PAV.006.120 PAV.006.130 - -

10 2 10 PAV.010.120 PAV.010.130 PAV.010.120 V PAV.010.130
13 3 12.5 PAV.013.120 PAV.013.130 PAV.013.120 V PAV.013.130
20 4 20 PAV.019.120 PAV.019.130 PAV.019.120 V PAV.019.130
25 5 25 PAV.025.120 PAV.025.130 PAV.025.120 V PAV.025.130
30 6 31.5 PAV.030.120 PAV.030.130 - -

PAVX
ISO A
ACCIAIO INOX
STAINLESS STEEL
EDELSTAHL
ACIER INOX

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 5 45 12 17 320 290 290 0.5

Technical data E
10 2 10 8.5 30 23 46 125 125 130 1.9
• Standard: ISO 7241 A 13 3 12.5 10.5 30 45 90 120 120 135 2.7
20 4 20 15.8 25 106 190 80 100 110 9.3
• Material: stainless steel AISI 316 25 5 25 17.3 20 189 280 60 65 85 19
• Threads: BSP - NPT 30 6 31.5 22.8 10 288 480 40 40 40 30

• Standard seals: FKM 39 7 40 29.9 8 379 700 32 32 32 54
• Working temperature: -25 °C +200 °C 50 8 50 37.7 6 757 1000 25 25 25 120
1 MPa = 145.04 psi • 1 l = 0.264 gal



PAVX
PAVX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PAVX.0606.002 119 180 PAVX.0606.003 38 300
NPT 1/4" ANSI B1.20.3 PAVX.0606.012 120 180 PAVX.0606.013 39 300
PAVX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
M22x1,5 SAE J 2244/1 PAVX.1322.102 288 50 PAVX.1322.103 89 100

(g) (pcs.) (g) (pcs.)

PAVX

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PAVX.2525.002 636 20 PAVX.2525.003 285 30
NPT 1" ANSI B1.20.3 PAVX.2525.012 643 20 PAVX.2525.013 292 30

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PAVX.3031.002 1470 12 PAVX.3031.003 480 20
NPT 1"¼ ANSI B1.20.3 PAVX.3031.012 1485 12 PAVX.3031.013 495 20

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PAVX.3939.002 1980 8 PAVX.3939.003 738 12
NPT 1"½ ANSI B1.20.3 PAVX.3939.012 2020 8 PAVX.3939.013 870 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PAVX.5051.002 3490 5 PAVX.5051.003 1168 8
NPT 2" ANSI B1.20.3 PAVX.5051.012 3500 5 PAVX.5051.013 1178 8

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PAVX
06 1 6.3 SPAV.06002 24 127 19.5 7 SPAV.06003 24.5 123 18 9 PVC

10 2 10 SPAV.10002 28 220 22 14 SPAV.10003 23.5 220 22 16 PVC
10 2 10 SPAV.10022 28 220 22 14 SPAV.10023 23.5 220 22 16 PVC
10 2 10 SPAV.10032 28 220 22 14 SPAV.10033 23.5 220 22 16 PVC
10 2 10 SPAV.10042 28 220 22 14 SPAV.10043 23.5 220 22 16 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC
25 5 25 SPAV.25002 54 235 41 46 SPAV.25003 49 235 41 53 PVC


06 1 6.3 PLT.304.030 V -
10 2 10 PAV.010.120 V PAV.010.130
13 3 12.5 PAV.013.120 V PAV.013.130
20 4 20 PAV.019.120 V PAV.019.130
25 5 25 PAV.025.120 V PAV.025.130
30 6 31.5 PAVX.030.120 -
39 7 40 PAVX.039.120 -
50 8 50 PAVX.050.120 -

PDV1
STANDARD
VALVOLA
POPPET
VENTIL
CLAPET
• Intercambiabilità: con i principali produttori

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 6.5 40 12 24 160 170 170 1

Technical data E
10 2 10 8.5 35 23 46 150 170 150 2.4
• Interchange: with the main producers 13 3 12.5 10.5 25 45 90 100 140 120 2.7
20 4 19 15.7 25 106 190 100 120 110 8.6
• Material: steel 25 5 25 16.6 25 189 250 120 110 100 13
• Threads: BSP - NPT 39 7 40 29.9 20 379 700 96 80 80 52
• Standard seals: NBR 50 8 50 46.5 10 757 1000 40 40 40 90
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Austauschbarkeit:
mit den wichtigsten Lieferanten
• Interchangeabilité:
avec les principaux producteurs

PDV1
PDV1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PDV1.0606.002 118 100 PDV1.0606.003 46 300
NPT 1/4" ANSI B1.20.3 PDV1.0606.012 119 100 PDV1.0606.013 47 300

(g) (pcs.) (g) (pcs.)
3/4"-16 UNF-2A SAE J1926-3 PDV1.0619.302 100 100 PDV1.0619.303 65 300
PDV1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PDV1.1010.002 200 56 PDV1.1010.003 80 200
NPT 3/8" ANSI B1.20.3 PDV1.1010.012 201 56 PDV1.1010.013 81 200

PDV1
PDV1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PAV1.1313.002 268 50 PAV1.1313.003 97 200
NPT 1/2" ANSI B1.20.3 PAV1.1313.012 269 50 PAV1.1313.013 98 200

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PDV1.2019.002 473 28 PDV1.2019.003 183 45
NPT 3/4" ANSI B1.20.3 PDV1.2019.012 478 28 PDV1.2019.013 188 45

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PDV1.2525.002 736 20 PDV1.2525.003 282 30
NPT 1" ANSI B1.20.3 PDV1.2525.012 743 20 PDV1.2525.013 289 30

PDV1
PDV1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PDV1.3031.002 1520 12 PDV1.3031.003 556 20
NPT 1"¼ ANSI B1.20.3 PDV1.3031.012 1537 12 PDV1.3031.013 573 20
RC 1"¼ UNI ISO 7/1 PDV1.3031.042 1537 12 PDV1.3031.043 573 20

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PDV1.3939.002 2472 8 PDV1.3939.003 936 12
NPT 1"½ ANSI B1.20.3 PDV1.3939.012 2491 8 PDV1.3939.013 955 12
RC 1"½ UNI ISO 7/1 PDV1.3939.042 2491 8 PDV1.3939.043 955 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PDV1.5051.002 4010 5 PDV1.5051.003 1892 8
NPT 2" ANSI B1.20.3 PDV1.5051.012 4020 5 PDV1.5051.013 1900 8
RC 2" UNI ISO 7/1 PDV1.5051.042 4020 5 PDV1.5051.043 1900 8

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PDV1
06 1 6.3 SPDV.06002 25 204 19.5 13 SPDV.06003 22 204 19.5 15 PVC

10 2 10 SPDV.10002 31 207 24.5 15 SPDV.10003 26 205 24.5 18 PVC
10 2 10 SPDV.10032 31 207 24.5 15 SPDV.10033 26 205 24.5 18 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 19 SPDV.20002 44 270 33 38 SPDV.20003 37 270 33 43 PVC
20 4 19 SPDV.20032 44 270 33 38 SPDV.20033 37 270 33 43 PVC
25 5 25 SPDV.25002 50 290 39 45 SPDV.25003 41 290 39 56 PVC
50 8 50 SPDV.50002 115 270 45 169 SPDV.50003 100 300 45 293 PVC

30 6 31.5 SPAV.30202 70 275 47 120 SPDV.30203 63 275 47 215 Aluminum
39 7 40 SPAV.39202 83 275 47 170 SPDV.39203 78 275 47 355 Aluminum
*AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER EPDM O

‘V’ PER VITON
06 1 6.3 PDV.006.120 PDV.006.130 *ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER EPDM
ODER ‘V’ FUER VITON AN
10 2 10 PDV.010.120 PDV.010.130
13 3 12.5 PAV.013.120 PAV.013.130
20 4 19 PDV.019.120 PVV.019.130
25 5 25 PDV.025.120 PDV.025.130
30 6 31.5 PDV.030.120 PDV.030.130
39 7 40 PDV.039.120 PDV.039.130
50 8 50 PDV.050.120 -

PDS1
STANDARD
SFERA
BALL
KUGEL
BILLE

• Occlusione: sfera
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 5.3 30 12 20 120 120 150 0.5

• Interchange: with the main producers
• Occlusion: ball 10 2 10 7.4 25 23 35 100 100 160 1.4
• Material: steel 20 4 19 12.4 20 60 120 80 110 120 4.6
25 5 25 13.1 20 80 160 85 110 100 5.9
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Verschluss: kugel
• Obturation: bille

PDS1
PDS1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PDS1.0606.002 127 100 PDS1.0606.003 47 300
NPT 1/4" ANSI B1.20.3 PDS1.0606.012 128 100 PDS1.0606.013 48 300
PDS1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PDS1.1010.002 207 56 PDS1.1010.003 86 200
NPT 3/8" ANSI B1.20.3 PDS1.1010.012 208 56 PDS1.1010.013 87 200
PDS1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PDS1.1313.002 273 50 PDS1.1313.003 101 200
NPT 1/2" ANSI B1.20.3 PDS1.1313.012 275 50 PDS1.1313.013 103 200
IG 2 3/4"-16 UNF 2B SAE J 1926-1 PDS1.1319.032 281 50 PDS4.1319.033 108 200
7/8"-14 UNF 2B SAE J 1926-1 PDS1.1323.032 267 50 PDS1.1323.033 93 200
THREADS
IG 1 IG 2

PDS1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PDS1.2019.002 494 28 PDS1.2019.003 205 45
NPT 3/4" ANSI B1.20.3 PDS1.2019.012 500 28 PDS1.2019.013 210 45

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PDS1.2525.002 768 20 PDS1.2525.003 302 30
NPT 1" ANSI B1.20.3 PDS1.2525.012 775 20 PDS1.2525.013 310 30

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PDS1
06 1 6.3 SPDV.06002 25 204 19.5 13 SPDV.06003 22 204 19.5 15 PVC

10 2 10 SPDV.10002 31 207 24.5 15 SPDV.10003 26 205 24.5 18 PVC
10 2 10 SPDV.10032 31 207 24.5 15 SPDV.10033 26 205 24.5 18 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 19 SPDV.20002 44 270 33 38 SPDV.20003 37 270 33 43 PVC
20 4 19 SPDV.20032 44 270 33 38 SPDV.20033 37 270 33 43 PVC
25 5 25 SPDV.25002 50 290 39 45 SPDV.25003 41 290 39 56 PVC
*AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER EPDM O ‘V’
PER VITON
06 1 6.3 PDV.006.120 PDV.006.130 *ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER EPDM ODER
‘V’ FUER VITON AN
10 2 10 PDV.010.120 PDV.010.130
13 3 12.5 PAV.013.120 PAV.013.130
20 4 19 PDV.019.120 PVV.019.130
25 5 25 PDV.025.120 PDV.025.130

PGR-PGV1-PSS1-PSV1-PNZ1
ESECUZIONI SPECIALI
SPECIAL EXECUTIONS
SONDERAUSFÜHRUNGEN
EXECUTIONS SPECIALES
• Intercambiabilità:
(PGR) serie 5000 Gromelle
(PGV) mercato giapponese
(PSS-PSV) serie 4000 Parker
(PNZ) serie PBR
• Occlusione: valvola o sfera
• Materiale: acciaio o acciaio inossidabile (PGRX)
• Filettature: BSP o NPT
• Guarnizioni standard: NBR o FKM (PGRX)
• Temperatura d’esercizio: Min burst pressure
Max working
-25 °C +100 °C / -25 °C +200 °C (PGRX)
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
PGR1 25 5 25 16.6 27 104 210 120 120 110 13
• Interchange:
(PGR) Gromelle 5000 series PGRX 25 5 25 16.6 20 104 210 80 100 75 13
(PGV) Japanese market PGV1 25 5 25 17.3 25 113 225 120 100 100 15
(PSS-PSV) Parker 4000 series
(PNZ) PBR series PSS1 20 4 19 12 22 58 100 93 88 110 4.6
• Occlusion: poppet or ball PSV1 20 4 19 12.3 25 106 220 100 140 130 11
PNZ1 25 5 25 17.3 30 200 400 140 130 130 16
• Material: steel or stainless steel (PGRX)
• Finishing: Zn-Fe (Cr III) 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Threads: BSP or NPT
• Standard seals: NBR or FKM (PGRX)
-25 °C +100°C / -25 °C +200 °C (PGRX)
(PGR) Gromelle 5000 Serie
(PGV) japanischer Markt
(PSS-PSV) Parker 4000 Serie
(PNZ) PBR Serie
• Verschluss: ventil oder kugel
• Werkstoff: Stahl oder Edelstahl (PGRX)
• Gewinde: BSP oder NPT
• Standard-Dichtungen: NBR oder FKM (PGRX)
-25 °C +100 °C / -25 °C +200 °C (PGRX)
(PGR) série 5000 Gromelle
(PGV) marché japonais
(PSS-PSV) série 4000 Parker
(PNZ) série PBR
• Obturation: clapet ou bille
• Matériel: acier ou acier inoxydable (PGRX)
• Taraudage: BSP ou NPT
• Joints standard: NBR ou FKM (PGRX)
-25 °C +100 °C / -25 °C +200 °C (PGRX)

PGR1 DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PGR1.2525.002 712 20 PGR1.2525.003 296 30
PGRX DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PGRX.2525.002 672 20 PGRX.2525.003 255 30
PGV1 DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PGV1.2525.002 745 18 PGV1.2525.003 326 30
PSS1 DN20 - BG 4 - ISO 19

(g) (pcs.) (g) (pcs.)
NPT 3/4" ANSI B1.20.3 PSS1.2019.012 506 28 PSS1.2019.013 180 45

PSV1 DN20 - BG 4 - ISO 19

(g) (pcs.) (g) (pcs.)
NPT 3/4" ANSI B1.20.3 PSV1.2019.012 502 28 PSV1.2019.013 171 45
PNZ1 DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PNZ1.2525.002 1270 12 PNZ1.2525.003 459 24
ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES

*AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER
DNP BG ISO OR (NBR*-FKM) BK (PTFE) EPDM O ‘V’ PER VITON
PGR1 25 5 25 PGR.025.120 PGR.025.130
*ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER
PGRX 25 5 25 PGR.025.120 V PGR.025.130 EPDM ODER ‘V’ FUER VITON AN
PGV1 25 5 25 PGV.025.120 PGV.025.130 *AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU ‘V’
POUR VITON
PSS1 20 4 19 PSS.019.120 -
PSV1 20 4 19 PSS.019.120 -
PNZ1 25 5 25 PBV.025.120 PNZ.025.130

PTV1
NORDIC INTERCHANGE
VALVOLA/ACCIAIO
POPPET/STEEL
VENTIL/STAHL
CLAPET/ACIER
• Intercambiabilità: serie Parker-Tema T

• Finitura: Zn-Ni
• Connessione in pressione: non consentita Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Parker-Tema T series
06 1 6.3 6.3 40 12 29 150 150 160 1
10 2 10 9.2 37 45 90 110 140 130 2.5
• Material: steel 13 3 12.5 12.2 35 90 160 110 130 120 6
• Finishing: Zn-Ni 20 4 19 18.3 30 212 300 90 110 110 20
• Threads: BSP - NPT 25 5 25 23.7 30 380 500 90 100 110 35
• Austauschbarkeit: Parker-Tema T Serie

• Interchangeabilité: Parker-série Tema T


PTV1
PTV1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PTV1.0606.002 146 95 PTV1.0606.003 78 120
NPT 1/4" ANSI B1.20.3 PTV1.0606.012 147 95 PTV1.0606.013 79 120
PTV1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PTV1.1010.002 250 47 PTV1.1010.003 70 200
NPT 3/8" ANSI B1.20.3 PTV1.1010.012 252 47 PTV1.1010.013 72 200
PTV1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PTV1.1313.002 360 35 PTV1.1313.003 117 100
NPT 1/2" ANSI B1.20.3 PTV1.1313.012 363 35 PTV1.1313.013 120 100

PTV1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PTV1.2019.002 615 20 PTV1.2019.003 205 42
NPT 3/4" ANSI B1.20.3 PTV1.2019.012 622 20 PTV1.2019.013 210 42

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PTV1.2525.002 1014 12 PTV1.2525.003 349 24
NPT 1" ANSI B1.20.3 PTV1.2525.012 1025 12 PTV1.2525.013 359 24

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PTV1
10 2 10 SPTV.10002 33 140 24 13 SPTV.10003 26 140 24 14 PVC

13 3 12.5 SPTV.13002 39 160 28 17 SPTV.13003 31 160 28 18 PVC
20 4 19 SPTV.20002 51 190 34 27 SPTV.20003 39 190 34 25 PVC
25 5 25 SPTV.25002 61 250 50 40 SPTV.25003 50 250 50 48 PVC

DNP BG ISO OR-1 (NBR*) OR-2 (NBR*) BK-1 (PTFE) BK-2 (PTFE)
06 1 6.3 PTV.006.120 PAV.006.120 - PAV.006.130

10 2 10 PDV.010.120 PAV.013.120 PTV.010.130 -
13 3 12.5 PVV.013.120 PTV.013.120 PTV.013.130 -
20 4 19 PVT.019.121 PTV.019.120 PTV.019.130 PTV.019.131
25 5 25 PLK.039.120 PTV.025.120 PTV.025.130 VFH.025.130


PTK1
NORDIC INTERCHANGE
VALVOLA DECOMPRESSIONE/ACCIAIO
DECOMPRESSION VALVE/STEEL
DEKOMPRESSIONSVENTIL/STAHL
CLAPET DECOMPRESSION/ACIER
• Occlusione: valvola decompressione
• Finitura: Zn-Ni
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
Technical data E
flow
Max
Nominal size
• Interchange: Parker-Tema T series DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Occlusion: decompression valve 10 2 10 9.2 37 45 90 110 140 130 2.5
13 3 12.5 12.2 35 90 160 110 130 120 6
• Material: steel
20 4 19 18.3 30 212 300 90 110 110 20
• Finishing: Zn-Ni
• Threads: BSP - NPT 25 5 25 23.7 30 380 500 90 100 110 35

• Verschluss: Dekompressionsventil
• Interchangeabilité: série Parker-Tema T

• Obturation: clapet décompression

PTK1
PTK1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PTK1.1010.002 250 47 PTK1.1010.003 70 200
NPT 3/8" ANSI B1.20.3 PTK1.1010.012 252 47 PTK1.1010.013 72 200
PTK1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PTK1.1313.002 360 35 PTK1.1313.003 117 100
NPT 1/2" ANSI B1.20.3 PTK1.1313.012 363 35 PTK1.1313.013 120 100

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PTK1.2019.002 614 20 PTK1.2019.003 204 42
NPT 3/4" ANSI B1.20.3 PTK1.2019.012 620 20 PTK1.2019.013 209 42

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PTK1.2525.002 1014 12 PTK1.2525.003 348 24
NPT 1" ANSI B1.20.3 PTK1.2525.012 1024 12 PTK1.2525.013 357 24

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PTK1
10 2 10 SPTV.10002 33 140 24 13 SPTV.10003 26 140 24 14 PVC

13 3 12.5 SPTV.13002 39 160 28 17 SPTV.13003 31 160 28 18 PVC
20 4 19 SPTV.20002 51 190 34 27 SPTV.20003 39 190 34 25 PVC
25 5 25 SPTV.25002 61 250 50 40 SPTV.25003 50 250 50 48 PVC

10 2 10 PDV.010.120 PAV.013.120 PTV.010.130 -

13 3 12.5 PVV.013.120 PTV.013.120 PTV.013.130 -
20 4 19 PVT.019.121 PTV.019.120 PTV.019.130 PTV.019.131
25 5 25 PLK.039.120 PTV.025.120 PTV.025.130 VFH.025.130


PTO1
NORDIC INTERCHANGE
FREE FLOW/STEEL
FREIER DURCHLAUF /STAHL
PASSAGE LIBRE/ACIER

• Finitura: Zn-Ni
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Parker-Tema T series 06 1 6.3 7.5 40 12 29 - - 160 -

• Occlusion: free flow 10 2 10 10 37 45 90 - - 130 -
13 3 12.5 13.2 35 90 160 - - 120 -
• Material: steel
• Finishing: Zn-Ni 20 4 19 19 30 212 300 - - 110 -
• Threads: BSP - NPT 25 5 25 24.4 30 380 500 - - 110 -


• Interchangeabilité: série Parker-Tema T


PTO1
PTO1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PTO1.0606.002 136 95 PTO1.0606.003 69 120
NPT 1/4" ANSI B1.20.3 PTO1.0606.012 137 95 PTO1.0606.013 70 120
PTO1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PTO1.1010.002 234 47 PTO1.1010.003 54 200
NPT 3/8" ANSI B1.20.3 PTO1.1010.012 235 47 PTO1.1010.013 55 200
PTO1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PTO1.1313.002 337 35 PTO1.1313.003 94 100
NPT 1/2" ANSI B1.20.3 PTO1.1313.012 340 35 PTO1.1313.013 96 100

PTO1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PTO1.2019.002 577 20 PTO1.2019.003 167 42
NPT 3/4" ANSI B1.20.3 PTO1.2019.012 582 20 PTO1.2019.013 172 42

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PTO1.2525.002 954 12 PTO1.2525.003 289 24
NPT 1" ANSI B1.20.3 PTO1.2525.012 963 12 PTO1.2525.013 298 24

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PTO1
10 2 10 SPTV.10002 33 140 24 13 SPTV.10003 26 140 24 14 PVC

13 3 12.5 SPTV.13002 39 160 28 17 SPTV.13003 31 160 28 18 PVC
20 4 19 SPTV.20002 51 190 34 27 SPTV.20003 39 190 34 25 PVC
25 5 25 SPTV.25002 61 250 50 40 SPTV.25003 50 250 50 48 PVC

06 1 6.3 PTV.006.120 PAV.006.120 - PAV.006.130

10 2 10 PDV.010.120 PAV.013.120 PTV.010.130 -
13 3 12.5 PVV.013.120 PTV.013.120 PTV.013.130 -
20 4 19 PVT.019.121 PTV.019.120 PTV.019.130 PTV.019.131
25 5 25 PLK.039.120 PTV.025.120 PTV.025.130 VFH.025.130


PNV1
AMERICAN INTERCHANGE
VALVOLA/ACCIAIO
POPPET/STEEL
VENTIL/STAHL
CLAPET/ACIER
• Intercambiabilità: serie Parker/Snap-Tite H

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 6.4 50 12 24 186 164 165 2

Technical data E
10 2 10 8.5 40 23 46 178 202 131 3.2
• Interchange: Parker/Snap-Tite H series 13 3 12.5 10 30 45 90 114 104 105 4
• Occlusion: poppet 20 4 19 16.7 25 106 212 64 99 103 14
25 5 25 22 16 189 380 53 60 64 20
• Material: steel
• Finishing: Zn-Fe (Cr III) 30 6 31.5 28 12 288 576 37 50 35 45
• Threads: BSP - NPT 39 7 40 34 11 379 757 34 46 34 80

• Standard seals: NBR 50 8 50 47 10 757 1000 35 44 37 150
• Austauschbarkeit: Parker/Snap-Tite H Serie

• Interchangeabilité: série Parker/Snap-Tite H


PNV1
PNV1 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 48 46.5 BSP 1/4" DIN 3852-2-X PNV1.0606.002 90 168 PNV1.0606.003 64 224
48 46.5 NPT 1/4" ANSI B1.20.3 PNV1.0606.012 90 168 PNV1.0606.013 64 224
AG 7 59 57.5 14 NPT 1/4" ANSI B1.20.3 PNV1.0606.022 100 168 PNV1.0606.023 73 224
PNV1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PNV1.1010.002 153 120 PNV1.1010.003 104 168
NPT 3/8" ANSI B1.20.3 PNV1.1010.012 155 120 PNV1.1010.013 106 168
PNV1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 53 51 BSP 1/2" DIN 3852-2-X PNV1.1313.002 214 45 PNV1.1313.003 136 55
53 51 NPT 1/2" ANSI B1.20.3 PNV1.1313.012 215 45 PNV1.1313.013 137 55
AG 7 70 68 19 NPT 1/2" ANSI B1.20.3 PNV1.1313.022 257 45 PNV1.1313.023 188 55
THREADS
IG 1 AG 7

PNV1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PNV1.2019.002 386 30 PNV1.2019.003 278 30
NPT 3/4" ANSI B1.20.3 PNV1.2019.012 392 30 PNV1.2019.013 284 30
(g) (pcs.) (g) (pcs.)
IG 1 75.2 73.3 BSP 1" DIN 3852-2-X PNV1.2525.002 713 20 PNV1.2525.003 522 20
75.2 73.3 NPT 1" ANSI B1.20.3 PNV1.2525.012 723 20 PNV1.2525.013 532 20
AG 7 97.2 95.3 24 NPT 1" ANSI B1.20.3 PNV1.2525.022 827 20 PNV1.2525.023 639 20
PNV1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PNV1.3031.002 865 18 PNV1.3031.003 645 18
NPT 1"¼ ANSI B1.20.3 PNV1.3031.012 879 18 PNV1.3031.013 660 18
THREADS
IG 1 AG 7

PNV1

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PNV1.3939.002 1315 11 PNV1.3939.003 955 12
NPT 1"½ ANSI B1.20.3 PNV1.3939.012 1334 11 PNV1.3939.013 974 12

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X PNV1.5051.002 2820 6 PNV1.5051.003 2140 6
NPT 2" ANSI B1.20.3 PNV1.5051.012 2833 6 PNV1.5051.013 2160 6

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PNV1
06 1 6.3 SPNV.06042 25 115 15 6 SPNV.06043 25 115 15 7 PVC

10 2 10 SPNV.10042 30 120 18 7 SPNV.10043 30 120 18 10 PVC
13 3 12.5 SPNV.13042 35 120 22 9 SPNV.13043 35 120 22 12 PVC
20 4 19 SPNV.20042 44 155 22 15 SPNV.20043 44 155 22 20 PVC
25 5 25 SPNV.25042 51 165 36 23 SPNV.25043 51 165 36 26 PVC

06 1 6.3 PBV.004.120 PBV.004.130

10 2 10 PLK.013.120 PNV.010.130
13 3 12.5 PVS.006.120 PNV.013.130
20 4 19 PBV.013.120 PBV.013.130
25 5 25 PLT.325.031 PNV.025.130
30 6 31.5 PGV.025.120 PNV.031.130
39 7 40 PNV.039.120 PNV.039.130
50 8 50 PNV.050.120 PNV.050.130


PNVX
VALVOLA/ACCIAIO INOX
POPPET/STAINLESS STEEL
VENTIL/EDELSTAHL
CLAPET/ACIER INOX

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max

• Interchange: Parker/Snap-Tite H series
06 1 6.3 6.4 40 12 24 180 165 143 2
10 2 10 8.5 35 23 46 120 210 180 3.2
• Material: stainless steel AISI 316 13 3 12.5 10 25 45 90 84 78 77 4
• Threads: BSP - NPT 20 4 19 16.7 14 106 212 47 43 78 14
• Standard seals: FKM 25 5 25 22 20 189 380 71 76 75 20



PNVX
PNVX DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 48 46.5 BSP 1/4" DIN 3852-2-X PNVX.0606.002 90 168 PNVX.0606.003 64 224
48 46.5 NPT 1/4" ANSI B1.20.3 PNVX.0606.012 90 168 PNVX.0606.013 64 224
AG 7 59 57.5 14 NPT 1/4" ANSI B1.20.3 PNVX.0606.022 100 168 PNVX.0606.023 73 224
PNVX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PNVX.1010.002 153 120 PNVX.1010.003 104 168
NPT 3/8" ANSI B1.20.3 PNVX.1010.012 155 120 PNVX.1010.013 106 168
PNVX DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 53 51 BSP 1/2" DIN 3852-2-X PNVX.1313.002 214 45 PNVX.1313.003 136 55
53 51 NPT 1/2" ANSI B1.20.3 PNVX.1313.012 215 45 PNVX.1313.013 137 55
AG 7 70 68 19 NPT 1/2" ANSI B1.20.3 PNVX.1313.022 257 45 PNVX.1313.023 188 55
THREADS
IG 1 AG 7

PNVX

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PNVX.2019.002 386 30 PNVX.2019.003 278 30
NPT 3/4" ANSI B1.20.3 PNVX.2019.012 392 30 PNVX.2019.013 284 30
(g) (pcs.) (g) (pcs.)
IG 1 75.2 73.3 BSP 1" DIN 3852-2-X PNVX.2525.002 713 20 PNVX.2525.003 522 20
75.2 73.3 NPT 1" ANSI B1.20.3 PNVX.2525.012 723 20 PNVX.2525.013 532 20
AG 7 97.2 95.3 24 NPT 1" ANSI B1.20.3 PNVX.2525.022 827 20 PNVX.2525.023 639 20
THREADS
IG 1 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PNVX
06 1 6.3 SPNV.06042 25 115 15 6 SPNV.06043 25 115 15 7 PVC

10 2 10 SPNV.10042 30 120 18 7 SPNV.10043 30 120 18 10 PVC
13 3 12.5 SPNV.13042 35 120 22 9 SPNV.13043 35 120 22 12 PVC
20 4 19 SPNV.20042 44 155 22 15 SPNV.20043 44 155 22 20 PVC
25 5 25 SPNV.25042 51 165 36 23 SPNV.25043 51 165 36 26 PVC

DNP BG ISO OR (KFM) BK (PTFE)
06 1 6.3 PBV.004.120 V PBV.004.130

10 2 10 PLK.013.120 V PNV.010.130
13 3 12.5 PVS.006.120 V PNV.013.130
20 4 19 PBV.013.120 V PBV.013.130
25 5 25 PLT.325.031 V PNV.025.130

PNO1
FREE FLOW/STEEL
FREIER DURCHLAUF/STAHL
PASSAGE LIBRE/ACIER

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Parker/Snap-Tite H series 06 1 6.3 6.3 65 12 24 - - 250 -

13 3 12.5 11.5 50 45 90 - - 170 -
• Material: steel
• Finishing: Zn-Fe (Cr III) 20 4 19 17.5 50 106 220 - - 175 -
• Threads: BSP - NPT 25 5 25 24.2 35 189 380 - - 125 -




PNO1
PNO1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PNO1.0606.002 81 180 PNO1.0606.003 31 308
NPT 1/4" ANSI B1.20.3 PNO1.0606.012 81 180 PNO1.0606.013 31 308
PNO1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PNO1.1010.002 107 144 PNO1.1010.003 42 240
NPT 3/8" ANSI B1.20.3 PNO1.1010.012 110 144 PNO1.1010.013 44 240
PNO1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PNO1.1313.002 150 90 PNO1.1313.003 72 160
NPT 1/2" ANSI B1.20.3 PNO1.1313.012 152 90 PNO1.1313.013 74 160

PNO1

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PNO1.2019.002 228 30 PNO1.2019.003 120 96
NPT 3/4" ANSI B1.20.3 PNO1.2019.012 234 30 PNO1.2019.013 126 96
(g) (pcs.) (g) (pcs.)
IG 1 52.5 53 BSP 1" DIN 3852-2-X PNO1.2525.002 421 20 PNO1.2525.003 151 35
52.5 53 NPT 1" ANSI B1.20.3 PNO1.2525.012 441 20 PNO1.2525.013 171 35
AG 7 61 61.5 21.5 NPT 1" ANSI B1.20.3 PNO1.2525.022 462 20 PNO1.2525.023 192 35
THREADS
IG 1 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PNO1
06 1 6.3 SPNV.06042 25 115 15 6 SPNV.06043 25 115 15 7 PVC

10 2 10 SPNV.10042 30 120 18 7 SPNV.10043 30 120 18 10 PVC
13 3 12.5 SPNV.13042 35 120 22 9 SPNV.13043 35 120 22 12 PVC
20 4 19 SPNV.20042 44 155 22 15 SPNV.20043 44 155 22 20 PVC
25 5 25 SPNV.25042 51 165 36 23 SPNV.25043 51 165 36 26 PVC

06 1 6.3 PBV.004.120 PBV.004.130

10 2 10 PLK.013.120 PNV.010.130
13 3 12.5 PVS.006.120 PNV.013.130
20 4 19 PBV.013.120 PBV.013.130
25 5 25 PLT.325.031 PNV.025.130


PNOX
PASSAGGIO LIBERO/INOX
FREE FLOW/STAINLESS STEEL
FREIER DURCHLAUF/EDELSTAHL
PASSAGE LIBRE/ACIER INOX

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Parker/Snap-Tite H series 06 1 6.3 6.3 40 10 20 - - 120 -

13 3 12.5 11.5 40 45 90 - - 150 -
• Threads: BSP - NPT 20 4 19 17.5 25 185 370 - - 78 -
• Standard seals: FKM 25 5 25 24.2 20 285 570 - - 62 -




PNOX
PNOX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PNOX.0606.002 81 180 PNOX.0606.003 33 308
NPT 1/4" ANSI B1.20.3 PNOX.0606.012 81 180 PNOX.0606.013 33 308
PNOX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
PNOX DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)

PNOX

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PNOX.2525.002 427 20 PNOX.2525.003 151 35
NPT 1" ANSI B1.20.3 PNOX.2525.012 447 20 PNOX.2525.013 164 35

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PNOX
06 1 6.3 SPNV.06042 25 115 15 6 SPNV.06043 25 115 15 7 PVC

10 2 10 SPNV.10042 30 120 18 7 SPNV.10043 30 120 18 10 PVC
13 3 12.5 SPNV.13042 35 120 22 9 SPNV.13043 35 120 22 12 PVC
20 4 19 SPNV.20042 44 155 22 15 SPNV.20043 44 155 22 20 PVC
25 5 25 SPNV.25042 51 165 36 23 SPNV.25043 51 165 36 26 PVC

DNP BG ISO OR (KFM) BK (PTFE)
06 1 6.3 PBV.004.120 V PBV.004.130

10 2 10 PLK.013.120 V PNV.010.130
13 3 12.5 PVS.006.120 V PNV.013.130
20 4 19 PBV.013.120 V PBV.013.130
25 5 25 PLT.325.031 V PNV.025.130

PPV1
PUSH PULL
VALVOLA
POPPET
VENTIL
CLAPET

• Ghiera: doppia azione
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Standard: ISO 7241 A Nominal size
• Sleeve: double acting DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Occlusion: poppet 13 3 12.5 10.5 25 45 90 100 160 120 2.7
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Material: steel
• Threads: BSP - NPT - SAE - METRICS

• Hülse: doppeltwirkend

• Douille: double action

PPV1
PPV1 DN13 - BG 3 - ISO 12.5
THREADS CH3 L2 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 27 70 BSP 1/2" DIN 3852-2-X PPV1.1313.002 298 50 PAV1.1313.003 97 200
27 BSP 1/2" DIN 3852-2-X PAV4.1313.003 94 200
27 BSP 1/2" DIN 3852-2-X PKV1.1313.003 99 200
27 70 NPT 1/2" ANSI B1.20.3 PPV1.1313.012 300 50 PAV1.1313.013 98 200
27 NPT 1/2" ANSI B1.20.3 PKV1.1313.013 100 200
32 NPT 3/4" ANSI B1.20.3 PKV1.1319.013 135 110
IG 2 27 66.5 M22x1.5 SAE J 2244/1 PPV1.1322.102 280 50 PAV1.1322.103 90 200
27 70 3/4"-16 UNF 2B SAE J 1926-1 PPV1.1319.032 305 50 PAV4.1319.033 101 200
27 3/4"-16 UNF 2B SAE J 1926-1 PKV1.1319.033 103 200
27 7/8"-14 UNF 2B SAE J 1926-1 PKV1.1323.033 90 200
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPV1
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC

13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
AUTOMATIC CAPS NOMINAL SIZE AUTOMATIC FEMALE CAP AUTOMATIC MALE CAP COLOR MATERIAL
DNP BG ISO COD. F D S (g) COD. M D S (g)

13 3 12.5 SPPV.13302 46 18.4 24 SPPV.13303 46 33 60 Nylon
13 3 12.5 SPPV.13312 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13322 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13332 46 18.4 24 SPPV.13333 46 33 60 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 SPPV.13343 46 33 60 Nylon

13 3 12.5 PAV.013.120 PAV.013.130

PPS1
PUSH PULL
SFERA
BALL
KUGEL
BILLE

Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Standard: ISO 7241 A Nominal size
• Sleeve: double acting DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Occlusion: ball 13 3 12.5 8.9 20 30 55 80 96 130 1.9
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Material: steel



PPS1
PPS1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PPS1.1313.002 305 50 PDS1.1313.003 101 200
BSP 1/2" DIN 3852-2-X PKS1.1313.003 99 200
NPT 1/2" ANSI B1.20.3 PPS1.1313.012 307 50 PDS1.1313.013 103 200
NPT 1/2" ANSI B1.20.3 PKS1.1313.013 100 200

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPS1
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC

13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC

13 3 12.5 SPPV.13302 46 18.4 24 SPPV.13303 46 33 60 Nylon
13 3 12.5 SPPV.13312 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13322 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13332 46 18.4 24 SPPV.13333 46 33 60 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 SPPV.13343 46 33 60 Nylon

13 3 12.5 PAV.013.120 PAV.013.130

PPV3
PUSH PULL
VALVOLA
POPPET
VENTIL
CLAPET
• Norma: ISO 7241 A (DN10→DN25)

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
06 1 6.3 5 35 12 17 100 240 170 0.5

• Standard: ISO 7241 A (DN10→DN25)
• Sleeve: double acting 10 2 10 8.5 30 23 46 130 150 130 1.9
• Material: steel
25 5 25 17.3 22.5 189 280 90 110 100 16
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Norm: ISO 7241 A (DN10→DN25)

• Norme: ISO 7241 A (DN10→DN25)


PPV3
PPV3 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 64 45.5 BSP 1/4" DIN 3852-2-X PPV3.0606.112 147 180 PPV3.0606.113 55 300
64 45.5 NPT 1/4" ANSI B1.20.3 PPV3.0606.012 148 180 PPV3.0606.013 57 300
AG 6 64 44 12 BSP 1/4" DIN 3852-11-X PPV3.0606.322 139 180 PPV3.0606.323 48 300
AG 3 62 42 10 08L M14x1.5 ISO 8434-1-L PPV3.0614.302 136 180 PPV3.0614.303 44 300
AGS 3 77 57 25 08L M14x1.5 ISO 8434-1-L PPV3.0614.502 156 100 PPV3.0614.503 65 200
THREADS
IG 1 AG 3 AG 6 AGS 3

PPV3
PPV3 DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 67 49 BSP 1/4" DIN 3852-2-X PPV3.1006.112 195 60 PPV3.1006.113 82 150
67 49 NPT 1/4" ANSI B1.20.3 PPV3.1006.012 196 60 PPV3.1006.013 83 150
67 49 RC 1/4" UNI ISO 7/1 PPV3.1006.042 198 60 PPV3.1006.043 84 150
67 49 BSP 3/8" DIN 3852-2-X PPV3.1010.112 186 60 PPV3.1010.113 73 150
67 49 NPT 3/8" ANSI B1.20.3 PPV3.1010.012 188 60 PPV3.1010.013 74 150
67 49 M16x1.5 ISO 6149-1 PPV3.1016.102 189 60 PPV3.1016.103 75 150
67 49 M18x1.5 ISO 6149-1 PPV3.1018.102 182 60 PPV3.1018.103 69 150
IG 2 67 49 9/16"-18 UNF 2B SAE J 1926-1 PPV3.1015.032 192 60 PPV3.1015.033 79 150
AG 2 68.9 50.9 14.1 9/16"-18 UNF 2A SAE J 514 PPV3.1015.302 180 60 PPV3.1015.303 66 150
AGS 2 88.1 70.1 33.3 9/16"-18 UNF 2A SAE J 514 PPV3.1015.502 193 60 PPV3.1015.503 79 120
AG 5 69.3 51.3 12 BSP 3/8" DIN 3852-2-B PPV3.1010.212 188 60 PPV3.1010.213 75 150
68.8 50.8 12 BSP 1/4" DIN 3852-2-A PPV3.1006.712 183 60 PPV3.1006.713 69 150
69.3 51.3 12 BSP 3/8" DIN 3852-2-A PPV3.1010.712 188 60 PPV3.1010.713 75 150
AG 7 68.8 50.8 14 NPT 1/4" ANSI B1.20.3 PPV3.1006.022 182 60 PPV3.1006.023 69 150
68.8 50.8 14 R 1/4"-19 UNI ISO 7/1 PPV3.1006.052 182 60 PPV3.1006.053 69 150
AG 3 64.8 46.8 10 06L M12x1.5 ISO 8434-1-L PPV3.1012.302 177 60 PPV3.1012.303 64 150
64.8 46.8 10 08L M14x1.5 ISO 8434-1-L PPV3.1014.302 178 60 PPV3.1014.303 65 150
65.8 47.8 11 10L M16x1.5 ISO 8434-1-L PPV3.1016.302 179 60 PPV3.1016.303 66 150
65.8 47.8 11 12L M18x1.5 ISO 8434-1-L PPV3.1018.302 180 60 PPV3.1018.303 66 150
66.8 48.8 12 08S M16x1.5 ISO 8434-1-S PPV3.1016.402 183 60 PPV3.1016.403 70 150
66.8 48.8 12 10S M18x1.5 ISO 8434-1-S PPV3.1018.402 185 60 PPV3.1018.403 72 150
66.8 48.8 12 12S M20x1.5 ISO 8434-1-S PPV3.1020.402 187 60 PPV3.1020.403 74 150
AGS 3 80.8 62.8 26 06L M12x1.5 ISO 8434-1-L PPV3.1012.502 194 60 PPV3.1012.503 81 120
80.8 62.8 26 08L M14x1.5 ISO 8434-1-L PPV3.1014.502 198 60 PPV3.1014.503 85 120
80.8 62.8 26 10L M16x1.5 ISO 8434-1-L PPV3.1016.502 204 60 PPV3.1016.503 90 120
80.8 62.8 26 12L M18x1.5 ISO 8434-1-L PPV3.1018.502 209 60 PPV3.1018.503 95 120
81.8 63.8 27 08S M16x1.5 ISO 8434-1-S PPV3.1016.602 212 60 PPV3.1016.603 99 120
81.8 63.8 27 10S M18x1.5 ISO 8434-1-S PPV3.1018.602 219 60 PPV3.1018.603 105 120
81.8 63.8 27 12S M20x1.5 ISO 8434-1-S PPV3.1020.602 228 60 PPV3.1020.603 115 120
THREADS
AG 7 AGS 2 AGS 3

PPV3
PPV3 DN13 - BG 3 - ISO 12.5
THREADS CH2 L2 CH3 L3 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 30 72 30 59 BSP 3/8" DIN 3852-2-X PPV3.1310.112 324 35 PPV3.1310.113 166 60
30 74.5 30 61.5 NPT 3/8" ANSI B1.20.3 PPV3.1310.012 350 35 PPV3.1310.013 192 60
30 74.5 30 59.5 RC 3/8" UNI ISO 7/1 PPV3.1310.042 345 35 PPV3.1310.043 187 60
30 72 30 59 BSP 1/2" DIN 3852-2-X PPV3.1313.112 320 35 PPV3.1313.113 162 60
30 75 30 62 NPT 1/2" ANSI B1.20.3 PPV3.1313.012 334 35 PPV3.1313.013 176 60
30 76.5 30 63.5 RC 1/2" UNI ISO 7/1 PPV3.1313.042 341 35 PPV3.1313.043 183 60
36 77.5 36 64.5 BSP 3/4" DIN 3852-2-X PPV3.1319.112 373 35 PPV3.1319.113 215 40
36 77.5 36 64.5 NPT 3/4" ANSI B1.20.3 PPV3.1319.012 382 35 PPV3.1319.013 224 40
30 72 30 59 M14x1.5 ISO 6149-1 PPV3.1314.102 333 35 PPV3.1314.103 175 60
30 72 30 59 M16x1.5 ISO 6149-1 PPV3.1316.102 327 35 PPV3.1316.103 169 60
30 72 30 59 M18x1.5 ISO 6149-1 PPV3.1318.102 321 35 PPV3.1318.103 163 60
30 72 30 59 M20x1.5 ISO 6149-1 PPV3.1320.102 324 35 PPV3.1320.103 166 60
27 72 27 59 BSP 3/8" DIN 3852-2-X PPV5.1310.112 310 35 PPV5.1310.113 152 76
IG 2 30 72 30 59 9/16"-18 UNF 2B SAE J 1926-1 PPV3.1315.032 331 35 PPV3.1315.033 173 60
30 72 30 59 3/4"-16 UNF 2B SAE J 1926-1 PPV3.1319.032 326 35 PPV3.1319.033 168 60
30 76 30 63 7/8"-14 UNF 2B SAE J 1926-1 PPV3.1323.032 325 35 PPV3.1323.033 167 60
30 74 30 61 M16x1.5 SAE J 2244/1 PPV3.1316.112 341 35 PPV3.1316.113 183 60
30 72 30 59 M22x1.5 SAE J 2244/1 PPV3.1322.102 328 35 PPV3.1322.103 170 60
AG 1 27 72.1 27 59.1 11.1 3/4"-16 UNF 2A SAE J 1926-3 PPV5.1319.332 292 35 PPV5.1319.333 134 76
30 75 30 62 16 M20x1.5 ISO 6149-2 PPV3.1320.222 311 35 PPV3.1320.223 153 60
AG 2 30 75.7 30 62.7 16.7 3/4"-16 UNF 2A SAE J 514 PPV3.1319.302 301 35 PPV3.1319.303 143 60
30 73.1 30 60.1 14.1 9/16"-18 UNF 2A SAE J 514 PPV3.1315.302 292 35 PPV3.1315.303 134 60
AGS 2 30 96.6 30 83.6 37.6 3/4"-16 UNF 2A SAE J 514 PPV3.1319.502 328 35 PPV3.1319.503 170 60
30 100.1 30 87.1 41.1 7/8"-14 UNF 2A SAE J 514 PPV3.1323.502 344 35 PPV3.1323.503 186 60
AG 5 30 73.5 30 60.5 12 BSP 3/8" DIN 3852-2-B PPV3.1310.212 302 35 PPV3.1310.213 144 60
30 76 30 63 13 BSP 1/2" DIN 3852-2-B PPV3.1313.212 310 35 PPV3.1313.213 152 60
30 70 30 57 11 M16x1.5 DIN 3863-U PPV3.1316.702 294 35 PPV3.1316.703 136 60
30 75 30 62 16 M20x1.5 DIN 3863-U PPV3.1320.702 307 35 PPV3.1320.703 148 60
30 73 30 60 14 M22x1.5 DIN 3863-U PPV3.1322.702 304 35 PPV3.1322.703 146 60
segue/follows/folgt/suite
IG 1 IG 2 AG 1 AG 2
THREADS
AG 5 AGS 2

PPV3
PPV3 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
AG 3 30 69 30 56 10 08L M14x1.5 ISO 8434-1-L PPV3.1314.302 292 35 PPV3.1314.303 134 60
30 70 30 57 11 10L M16x1.5 ISO 8434-1-L PPV3.1316.302 293 35 PPV3.1316.303 135 60
30 70 30 57 11 12L M18x1.5 ISO 8434-1-L PPV3.1318.302 294 35 PPV3.1318.303 136 60
30 71 30 58 12 15L M22x1.5 ISO 8434-1-L PPV3.1322.302 299 35 PPV3.1322.303 141 60
30 71 30 58 12 18L M26x1.5 ISO 8434-1-L PPV3.1326.302 304 35 PPV3.1326.303 146 60
30 71 30 58 12 10S M18x1.5 ISO 8434-1-S PPV3.1318.402 299 35 PPV3.1318.403 141 60
30 71 30 58 12 12S M20x1.5 ISO 8434-1-S PPV3.1320.402 301 35 PPV3.1320.403 143 60
30 73 30 60 14 14S M22x1.5 ISO 8434-1-S PPV3.1322.402 306 35 PPV3.1322.403 148 60
30 73 30 60 14 16S M24x1.5 ISO 8434-1-S PPV3.1324.402 307 35 PPV3.1324.403 149 60
30 75 30 62 16 20S M30x2 ISO 8434-1-S PPV3.1330.402 323 35 PPV3.1330.403 165 60
27 69 27 56 10 08L M14x1.5 ISO 8434-1-L PPV5.1314.302 279 35 PPV5.1314.303 121 76
27 70 27 57 11 10L M16x1.5 ISO 8434-1-L PPV5.1316.302 293 35 PPV5.1316.303 135 76
27 70 27 57 11 12L M18x1.5 ISO 8434-1-L PPV5.1318.302 281 35 PPV5.1318.303 123 76
27 71 27 58 12 15L M22x1.5 ISO 8434-1-L PPV5.1322.302 286 35 PPV5.1322.303 128 76
27 71 27 58 12 18L M26x1.5 ISO 8434-1-L PPV5.1326.302 291 35 PPV5.1326.303 133 76
AGS 3 30 85 30 72 26 08L M14x1.5 ISO 8434-1-L PPV3.1314.502 312 35 PPV3.1314.503 154 60
30 85 30 72 26 10L M16x1.5 ISO 8434-1-L PPV3.1316.502 318 35 PPV3.1316.503 160 60
30 85 30 72 26 12L M18x1.5 ISO 8434-1-L PPV3.1318.502 322 35 PPV3.1318.503 164 60
30 95 30 82 36 12L M18x1.5 ISO 8434-1-L PPV3.1318.512 330 35 PPV3.1318.513 172 60
30 86 30 73 27 15L M22x1.5 ISO 8434-1-L PPV3.1322.502 347 35 PPV3.1322.503 189 60
30 86 30 73 27 18L M26x1.5 ISO 8434-1-L PPV3.1326.502 378 35 PPV3.1326.503 220 60
30 86 30 73 27 10S M18x1.5 ISO 8434-1-S PPV3.1318.602 333 35 PPV3.1318.603 175 60
30 86 30 73 27 12S M20x1.5 ISO 8434-1-S PPV3.1320.602 341 35 PPV3.1320.603 183 60
30 88 30 75 29 14S M22x1.5 ISO 8434-1-S PPV3.1322.602 360 35 PPV3.1322.603 202 60
30 88 30 75 29 16S M24x1.5 ISO 8434-1-S PPV3.1324.602 365 35 PPV3.1324.603 207 60
30 88 30 75 29 20S M30x2 ISO 8434-1-S PPV3.1330.602 419 35 PPV3.1330.603 261 60
27 85 27 72 26 12L M18x1.5 ISO 8434-1-L PPV5.1318.502 309 35 PPV5.1318.503 151 76
27 86 27 73 27 15L M22x1.5 ISO 8434-1-L PPV5.1322.502 335 35 PPV5.1322.503 177 76
THREADS
AG 3 AGS 3

PPV3
(pcs.) (pcs.)
IG 1 92.8 65.5 BSP 1/2" DIN 3852-2-X PPV3.2013.112 623 24 PPV3.2013.113 288 42
94.3 67 NPT 1/2" ANSI B1.20.3 PPV3.2013.012 636 24 PPV3.2013.013 301 42
94.3 67 RC 1/2" UNI ISO 7/1 PPV3.2013.042 636 24 PPV3.2013.043 302 42
94.8 67.5 BSP 3/4" DIN 3852-2-X PPV3.2019.112 603 24 PPV3.2019.113 268 42
94.3 67 NPT 3/4" ANSI B1.20.3 PPV3.2019.012 608 24 PPV3.2019.013 274 42
94.3 67 RC 3/4" UNI ISO 7/1 PPV3.2019.042 611 24 PPV3.2019.043 277 42
90.8 63.5 M18x1.5 ISO 6149-1 PPV3.2018.102 622 24 PPV3.2018.103 287 42
90.3 63 M22x1.5 ISO 6149-1 PPV3.2022.102 605 24 PPV3.2022.103 270 42
94.3 67 M26x1.5 ISO 6149-1 PPV3.2026.102 602 24 PPV3.2026.103 267 42
94.3 67 M30x1.5 ISO 6149-1 PPV3.2030.102 575 24 PPV3.2030.103 241 42
IG 2 90.3 63 3/4"-16 UNF 2B SAE J 1926-1 PPV3.2019.032 615 24 PPV3.2019.033 280 42
94.3 67 7/8"-14 UNF 2B SAE J 1926-1 PPV3.2023.032 627 24 PPV3.2023.033 292 42
94.3 67 1"1/16-12 UN 2B SAE J 1926-1 PPV3.2027.032 597 24 PPV3.2027.033 263 42
AG 1 95.8 68.5 18.5 1"1/16-12 UN 2A SAE J 1926-3 PPV3.2027.332 590 24 PPV3.2027.333 256 42
AG 2 96 68.7 16.7 3/4"-16 UNF 2A SAE J 514 PPV3.2019.302 569 24 PPV3.2019.303 234 42
98.6 71.3 19.3 7/8"-14 UNF 2A SAE J 514 PPV3.2023.302 585 24 PPV3.2023.303 250 42
101.3 74 22 1"1/16-12 UN 2A SAE J 514 PPV3.2027.302 593 24 PPV3.2027.303 259 42
AGS 2 116.9 89.6 36.6 3/4"-16 UNF 2A SAE J 514 PPV3.2019.502 608 10 PPV3.2019.503 273 30
120.4 93.1 41.1 7/8"-14 UNF 2A SAE J 514 PPV3.2023.502 612 10 PPV3.2023.503 278 30
124.7 97.4 45.4 1"1/16-12 UN 2A SAE J 514 PPV3.2027.502 645 10 PPV3.2027.503 310 30
AG 5 98.3 71 16 BSP 3/4" DIN 3852-2-A PPV3.2019.712 594 24 PPV3.2019.713 260 42
IG 1 IG 2 AG 1 AG 2
THREADS
AG 5 AGS 2

PPV3
(pcs.) (pcs.)
AG 3 90.3 63 11 12L M18x1.5 ISO 8434-1-L PPV3.2018.302 561 24 PPV3.2018.303 226 42
91.3 64 12 15L M22x1.5 ISO 8434-1-L PPV3.2022.302 565 24 PPV3.2022.303 231 42
91.3 64 12 18L M26x1.5 ISO 8434-1-L PPV3.2026.302 572 24 PPV3.2026.303 237 42
93.3 66 14 22L M30x2 ISO 8434-1-L PPV3.2030.302 575 24 PPV3.2030.303 241 42
91.3 64 12 10S M18x1.5 ISO 8434-1-S PPV3.2018.402 564 24 PPV3.2018.403 230 42
91.3 64 12 12S M20x1.5 ISO 8434-1-S PPV3.2020.402 567 24 PPV3.2020.403 232 42
93.3 66 14 14S M22x1.5 ISO 8434-1-S PPV3.2022.402 571 24 PPV3.2022.403 236 42
93.3 66 14 16S M24x1.5 ISO 8434-1-S PPV3.2024.402 574 24 PPV3.2024.403 239 42
95.3 68 16 20S M30x2 ISO 8434-1-S PPV3.2030.402 588 24 PPV3.2030.403 253 42
AGS 3 105.3 78 26 12L M18x1.5 ISO 8434-1-L PPV3.2018.502 589 10 PPV3.2018.503 254 30
106.3 79 27 15L M22x1.5 ISO 8434-1-L PPV3.2022.502 614 10 PPV3.2022.503 279 30
106.3 79 27 18L M26x1.5 ISO 8434-1-L PPV3.2026.502 646 10 PPV3.2026.503 311 30
113.3 86 34 22L M30x2 ISO 8434-1-L PPV3.2030.502 682 10 PPV3.2030.503 348 30
106.3 79 27 10S M18x1.5 ISO 8434-1-S PPV3.2018.602 597 10 PPV3.2018.603 262 30
106.3 79 27 12S M20x1.5 ISO 8434-1-S PPV3.2020.602 608 10 PPV3.2020.603 273 30
108.3 81 29 14S M22x1.5 ISO 8434-1-S PPV3.2022.602 623 10 PPV3.2022.603 289 30
108.3 81 29 16S M24x1.5 ISO 8434-1-S PPV3.2024.602 631 10 PPV3.2024.603 296 30
113.3 86 34 20S M30x2 ISO 8434-1-S PPV3.2030.602 677 10 PPV3.2030.603 343 30
AGS 4 117.8 90.5 38.5 1"-14 UNS 2A SAE J 1453 PPV3.2025.532 644 10 PPV3.2025.533 310 30
119.3 92 40 1"3/16-12 UN 2A SAE J 1453 PPV3.2030.532 688 10 PPV3.2030.533 353 30
THREADS
AG 3 AGS 3 AGS 4

PPV3
(g) (pcs.) (g) (pcs.)
IG 1 41 99.5 41 76 BSP 3/4" DIN 3852-2-X PPV3.2519.112 853 18 PPV3.2519.113 453 30
41 99.5 41 76 NPT 3/4" ANSI B1.20.3 PPV3.2519.012 860 18 PPV3.2519.013 460 30
41 99.5 41 76 RC 3/4" UNI ISO 7/1 PPV3.2519.042 860 18 PPV3.2519.043 460 30
41 99.5 41 76 BSP 1" DIN 3852-2-X PPV3.2525.112 798 18 PPV3.2525.113 398 30
41 99.5 41 76 NPT 1" ANSI B1.20.3 PPV3.2525.012 811 18 PPV3.2525.013 411 30
41 99.5 41 76 M30x1.5 ISO 6149-1 PPV3.2530.102 826 18 PPV3.2530.103 426 30
IG 2 41 99.5 41 76 1"1/16-12 UN 2B SAE J 1926-1 PPV3.2527.032 847 18 PPV3.2527.033 447 30
41 99.5 41 76 1"5/16-12 UN 2B SAE J 1926-1 PPV3.2533.032 789 18 PPV3.2533.033 389 30
AG 2 41 103.6 41 80.1 23.1 1"5/16-12 UN 2A SAE J 514 PPV3.2533.302 788 18 PPV3.2533.303 388 30
AGS 2 41 125.9 41 102.4 45.4 1"5/16-12 UN 2A SAE J 514 PPV3.2533.502 885 10 PPV3.2533.503 485 25
AG 5 41 101.5 41 78 18 BSP 1" DIN 3852-2-B PPV3.2525.212 796 18 PPV3.2525.213 396 30
41 97.5 41 74 17 BSP 1" BS B5200 PPV3.2525.702 773 18 PPV3.2525.703 373 30
41 99.5 41 76 16 BSP 3/4" DIN 3852-2-A PPV3.2519.712 772 18 PPV3.2519.713 372 30
41 101.5 41 78 18 BSP 1" DIN 3852-2-A PPV3.2525.712 798 18 PPV3.2525.713 398 30
AG 3 41 92.5 41 69 12 18L M26x1.5 ISO 8434-1-L PPV3.2526.302 748 18 PPV3.2526.303 348 30
41 94.5 41 71 14 22L M30x2 ISO 8434-1-L PPV3.2530.302 753 18 PPV3.2530.303 353 30
41 94.5 41 71 14 28L M36x2 ISO 8434-1-L PPV3.2536.302 759 18 PPV3.2536.303 359 30
46 96.5 46 73 16 35L M45x2 ISO 8434-1-L PPV3.2545.302 847 18 PPV3.2545.303 447 30
41 96.5 41 73 16 20S M30x2 ISO 8434-1-S PPV3.2530.402 764 18 PPV3.2530.403 364 30
41 98.5 41 75 18 25S M36x2 ISO 8434-1-S PPV3.2536.402 787 18 PPV3.2536.403 387 30
46 100.5 46 77 20 30S M42x2 ISO 8434-1-S PPV3.2542.402 868 10 PPV3.2542.403 468 25
55 102.5 55 79 22 38S M52x2 ISO 8434-1-S PPV3.2552.402 1056 10 PPV3.2552.403 655 25
AGS 3 41 114.5 41 91 34 18L M26x1.5 ISO 8434-1-L PPV3.2526.502 837 10 PPV3.2526.503 436 25
41 114.5 41 91 34 22L M30x2 ISO 8434-1-L PPV3.2530.502 862 10 PPV3.2530.503 462 25
41 114.5 41 91 34 28L M36x2 ISO 8434-1-L PPV3.2536.502 900 10 PPV3.2536.503 499 25
46 120.5 46 97 40 35L M45x2 ISO 8434-1-L PPV3.2545.502 1114 10 PPV3.2545.503 714 25
41 116.5 41 93 36 20S M30x2 ISO 8434-1-S PPV3.2530.602 879 10 PPV3.2530.603 479 25
41 118.5 41 95 38 25S M36x2 ISO 8434-1-S PPV3.2536.602 940 10 PPV3.2536.603 540 25
46 120.5 46 97 40 30S M42x2 ISO 8434-1-S PPV3.2542.602 1050 10 PPV3.2542.603 650 20
55 133.5 55 110 53 38S M52x2 ISO 8434-1-S PPV3.2552.602 1446 10 PPV3.2552.603 1046 20
IG 1 IG 2 AG 2 AG 3
THREADS
AG 5 AGS 2 AGS 3

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPV3
10 2 10 SPAV.10002 28 220 22 14 SPAV.10003 23.5 220 22 16 PVC

10 2 10 SPAV.10022 28 220 22 14 SPAV.10023 23.5 220 22 16 PVC
10 2 10 SPAV.10032 28 220 22 14 SPAV.10033 23.5 220 22 16 PVC
10 2 10 SPAV.10042 28 220 22 14 SPAV.10043 23.5 220 22 16 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC
25 5 25 SPAV.25002 54 235 41 46 SPAV.25003 49 235 41 53 PVC

13 3 12.5 SPPV.13302 46 18.4 24 SPPV.13303 46 33 60 Nylon

13 3 12.5 SPPV.13312 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13322 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13332 46 18.4 24 SPPV.13333 46 33 60 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 SPPV.13343 46 33 60 Nylon
*AL CODICE DELLA GUARNIZIONE IN NBR AGGIUNGERE ‘E’ PER

EPDM O ‘V’ PER VITON
06 1 6.3 PPV.006.120 PPV.006.130 *ZU DER ARTIKELNR. DER NBR DICHTUNG GEBEN SIE ‘E’ FUER
10 2 10 PPV.010.120 PPV.010.130 EPDM ODER ‘V’ FUER VITON AN
*AU CODE DU JOINT EN NBR JOINDRE ‘E’ POUR EPDM OU ‘V’ POUR
PPV3 13 3 12.5 PPV.013.120 PPV.013.130
VITON
PPV5 13 3 12.5 PAV.013.120 PAV.013.130

20 4 20 PAV.019.120 PAV.019.130
25 5 25 PAV.025.120 PAV.025.130

PPVX
PUSH PULL
ACCIAIO INOX
STAINLESS STEEL
EDELSTHAL
ACIER INOX

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Standard: ISO 7241 A DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Sleeve: double acting 10 2 10 8.5 30 23 46 120 120 130 1.9

1 MPa = 145.04 psi • 1 l = 0.264 gal



PPVX
PPVX DN10 - BG 2 - ISO 10
THREADS L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
AG 3 11 10L M16x1.5 ISO 8434-1-L PPVX.1016.302 215 60 PPVX.1016.303 72 150
PPVX DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
AG 3 67.5 51.5 11 12L M18x1.5 ISO 8434-1-L PPVX.1318.302 261 35 PPVX.1318.303 117 60
68.5 52.5 12 15L M22x1.5 ISO 8434-1-L PPVX.1322.302 265 35 PPVX.1322.303 121 60
AG 5 73.5 57.5 14 BSP 1/2" DIN 3852-2-B PPVX.1313.212 281 35 PPVX.1313.213 137 60
THREADS
AG 3 AG 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPVX
10 2 10 SPAV.10002 28 220 22 14 SPAV.10003 23.5 220 22 16 PVC

10 2 10 SPAV.10022 28 220 22 14 SPAV.10023 23.5 220 22 16 PVC
10 2 10 SPAV.10032 28 220 22 14 SPAV.10033 23.5 220 22 16 PVC
10 2 10 SPAV.10042 28 220 22 14 SPAV.10043 23.5 220 22 16 PVC
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC
13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC

13 3 12.5 SPPV.13302 46 18.4 24 SPPV.13303 46 33 60 Nylon

13 3 12.5 SPPV.13312 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13322 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13332 46 18.4 24 SPPV.13333 46 33 60 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 SPPV.13343 46 33 60 Nylon

10 2 10 PPV.010.120 V PPV.010.130
13 3 12.5 PPV.013.120 V PPV.013.130

PKK1
ISO A
VALVOLA DECOMPRESSIONE
DECOMPRESSION VALVE
DEKOMPRESSIONSVENTIL
CLAPET DECOMPRESSION

• Filettature: BSP - NPT - RC - SAE
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Occlusion: decompression valve
• Material: steel 20 4 20 15.8 25 106 190 90 150 100 9.3

• Threads: BSP - NPT - RC - SAE

• Gewinde: BSP - NPT - RC - SAE

• Taraudage: BSP - NPT - RC - SAE

PKK1
PKK1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X PKK1.1313.002 267 50 PKK1.1313.003 96 200
BSP 1/2" DIN 3852-2-X PKK4.1313.003 93 200
NPT 1/2" ANSI B1.20.3 PKK1.1313.012 268 50 PKK1.1313.013 97 200
RC 1/2" UNI ISO 7/1 PKK1.1313.042 268 50 PKK1.1313.043 97 200
IG 2 M22x1.5 SAE J 2244/1 PKK1.1322.102 259 50 PKK1.1322.103 89 200
3/4"-16 UNF 2B SAE J 1926-1 PKK1.1319.032 273 50 PKK4.1319.033 100 200
PKK1 DN20 - BG 4 - ISO 20

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PKK1.2019.002 428 28 PKK1.2019.003 180 45
NPT 3/4" ANSI B1.20.3 PKK1.2019.012 434 28 PKK1.2019.013 186 45
RC 3/4" UNI ISO 7/1 PKK1.2019.042 434 28 PKK1.2019.043 186 45
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PKK1
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC

13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC


13 3 12.5 PAV.013.120 PAV.013.130

20 4 20 PAV.019.120 PAV.019.130

PKK3
PUSH PULL
VALVOLA DECOMPRESSIONE
DECOMPRESSION VALVE
DEKOMPRESSIONSVENTIL
CLAPET DECOMPRESSION

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Technical data E
Fluid
Male
flow
Max
Nominal size
• Standard: ISO 7241 A DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Sleeve: double acting
13 3 12.5 10.5 25 45 90 100 150 110 2.7
• Occlusion: decompression valve
• Material: steel 1 MPa = 145.04 psi • 1 l = 0.264 gal



PKK3
PKK3 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 30 72 30 59 BSP 3/8" DIN 3852-2-X PKK3.1310.112 324 35 PKK3.1310.113 166 60
30 74.5 30 61.5 NPT 3/8" ANSI B1.20.3 PKK3.1310.012 350 35 PKK3.1310.013 192 60
30 72 30 59 BSP 1/2" DIN 3852-2-X PKK3.1313.112 320 35 PKK3.1313.113 162 60
30 75 30 62 NPT 1/2" ANSI B1.20.3 PKK3.1313.012 334 35 PKK3.1313.013 176 60
36 77.5 36 64.5 BSP 3/4" DIN 3852-2-X PKK3.1319.112 373 35 PKK3.1319.113 215 40
36 77.5 36 64.5 NPT 3/4" ANSI B1.20.3 PKK3.1319.012 382 35 PKK3.1319.013 224 40
30 72 30 59 M14x1.5 ISO 6149-1 PKK3.1314.102 333 35 PKK3.1314.103 175 60
30 72 30 59 M16x1.5 ISO 6149-1 PKK3.1316.102 327 35 PKK3.1316.103 169 60
30 72 30 59 M18x1.5 ISO 6149-1 PKK3.1318.102 321 35 PKK3.1318.103 163 60
30 72 30 59 M20x1.5 ISO 6149-1 PKK3.1320.102 324 35 PKK3.1320.103 166 60
27 72 27 59 BSP 3/8" DIN 3852-2-X PKK5.1310.112 310 35 PKK5.1310.113 152 76
IG 2 30 72 30 59 9/16"-18 UNF 2B SAE J 1926-1 PKK3.1315.032 331 35 PKK3.1315.033 173 60
30 72 30 59 3/4"-16 UNF 2B SAE J 1926-1 PKK3.1319.032 326 35 PKK3.1319.033 168 60
30 76 30 63 7/8"-14 UNF 2B SAE J 1926-1 PKK3.1323.032 325 35 PKK3.1323.033 167 60
30 74 30 61 M16x1.5 SAE J 2244/1 PKK3.1316.112 341 35 PKK3.1316.113 183 60
30 72 30 59 M22x1.5 SAE J 2244/1 PKK3.1322.102 328 35 PKK3.1322.103 169 60
AG 1 27 72.1 27 59.1 11.1 3/4"-16 UNF 2A SAE J 1926-3 PKK5.1319.332 292 35 PKK5.1319.333 134 76
30 75 30 62 16 M20x1.5 ISO 6149-2 PKK3.1320.222 311 35 PKK3.1320.223 153 60
AG 2 30 73.1 30 60.1 14.1 9/16"-18 UNF 2A SAE J 514 PKK3.1315.302 292 35 PKK3.1315.303 133 60
30 75.7 30 62.7 16.7 3/4"-16 UNF 2A SAE J 514 PKK3.1319.302 301 35 PKK3.1319.303 143 60
AGS 2 30 96.6 30 83.6 37.6 3/4"-16 UNF 2A SAE J 514 PKK3.1319.502 328 35 PKK3.1319.503 170 60
30 100.1 30 87.1 41.1 7/8"-14 UNF 2A SAE J 514 PKK3.1323.502 344 35 PKK3.1323.503 186 60
AG 5 30 73.5 30 60.5 12 BSP 3/8" DIN 3852-2-B PKK3.1310.212 302 35 PKK3.1310.213 144 60
30 76 30 63 13 BSP 1/2" DIN 3852-2-B PKK3.1313.212 310 35 PKK3.1313.213 152 60
30 70 30 57 11 M16x1.5 DIN 3863-U PKK3.1316.702 294 35 PKK3.1316.703 136 60
30 75 30 62 16 M20x1.5 DIN 3863-U PKK3.1320.702 307 35 PKK3.1320.703 148 60
30 73 30 60 14 M22x1.5 DIN 3863-U PKK3.1322.702 304 35 PKK3.1322.703 146 60
IG 1 IG 2 AG 1 AG 2
THREADS
AG 5 AGS 2

PKK3
PKK3 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
AG 3 30 69 30 56 10 08L M14x1.5 ISO 8434-1-L PKK3.1314.302 292 35 PKK3.1314.303 134 60
30 70 30 57 11 10L M16x1.5 ISO 8434-1-L PKK3.1316.302 293 35 PKK3.1316.303 135 60
30 70 30 57 11 12L M18x1.5 ISO 8434-1-L PKK3.1318.302 294 35 PKK3.1318.303 136 60
30 71 30 58 12 15L M22x1.5 ISO 8434-1-L PKK3.1322.302 299 35 PKK3.1322.303 141 60
30 71 30 58 12 18L M26x1.5 ISO 8434-1-L PKK3.1326.302 304 35 PKK3.1326.303 146 60
30 71 30 58 12 10S M18x1.5 ISO 8434-1-S PKK3.1318.402 299 35 PKK3.1318.403 141 60
30 71 30 58 12 12S M20x1.5 ISO 8434-1-S PKK3.1320.402 301 35 PKK3.1320.403 143 60
30 73 30 60 14 14S M22x1.5 ISO 8434-1-S PKK3.1322.402 306 35 PKK3.1322.403 148 60
30 73 30 60 14 16S M24x1.5 ISO 8434-1-S PKK3.1324.402 307 35 PKK3.1324.403 149 60
30 75 30 62 16 20S M30x2 ISO 8434-1-S PKK3.1330.402 323 35 PKK3.1330.403 165 60
27 69 27 56 10 08L M14x1.5 ISO 8434-1-L PKK5.1314.302 279 35 PKK5.1314.303 120 76
27 70 27 57 11 10L M16x1.5 ISO 8434-1-L PKK5.1316.302 280 35 PKK5.1316.303 121 76
27 70 27 57 11 12L M18x1.5 ISO 8434-1-L PKK5.1318.302 281 35 PKK5.1318.303 123 76
27 71 27 58 12 15L M22x1.5 ISO 8434-1-L PKK5.1322.302 286 35 PKK5.1322.303 127 76
27 71 27 58 12 18L M26x1.5 ISO 8434-1-L PKK5.1326.302 291 35 PKK5.1326.303 132 76
AGS 3 30 85 30 72 26 08L M14x1.5 ISO 8434-1-L PKK3.1314.502 312 35 PKK3.1314.503 154 60
30 85 30 72 26 10L M16x1.5 ISO 8434-1-L PKK3.1316.502 318 35 PKK3.1316.503 160 60
30 85 30 72 26 12L M18x1.5 ISO 8434-1-L PKK3.1318.502 322 35 PKK3.1318.503 164 60
30 95 30 82 36 12L M18x1.5 ISO 8434-1-L PKK3.1318.512 330 35 PKK3.1318.513 172 60
30 86 30 73 27 15L M22x1.5 ISO 8434-1-L PKK3.1322.502 347 35 PKK3.1322.503 189 60
30 86 30 73 27 18L M26x1.5 ISO 8434-1-L PKK3.1326.502 378 35 PKK3.1326.503 220 60
30 86 30 73 27 10S M18x1.5 ISO 8434-1-S PKK3.1318.602 333 35 PKK3.1318.603 175 60
30 86 30 73 27 12S M20x1.5 ISO 8434-1-S PKK3.1320.602 341 35 PKK3.1320.603 183 60
30 88 30 75 29 14S M22x1.5 ISO 8434-1-S PKK3.1322.602 360 35 PKK3.1322.603 202 60
30 88 30 75 29 16S M24x1.5 ISO 8434-1-S PKK3.1324.602 365 35 PKK3.1324.603 207 60
30 88 30 75 29 20S M30x2 ISO 8434-1-S PKK3.1330.602 419 35 PKK3.1330.603 261 60
27 85 27 72 26 12L M18x1.5 ISO 8434-1-L PKK5.1318.502 309 35 PKK5.1318.503 151 76
27 86 27 73 27 15L M22x1.5 ISO 8434-1-L PKK5.1322.502 335 35 PKK5.1322.503 177 76
THREADS
AG 3 AGS 3

PKK3
(pcs.) (pcs.)
IG 1 92.8 65.5 BSP 1/2" DIN 3852-2-X PKK3.2013.112 623 24 PKK3.2013.113 288 42
94.3 67 NPT 1/2" ANSI B1.20.3 PKK3.2013.012 636 24 PKK3.2013.013 301 42
94.8 67.5 BSP 3/4" DIN 3852-2-X PKK3.2019.112 603 24 PKK3.2019.113 268 42
94.3 67 NPT 3/4" ANSI B1.20.3 PKK3.2019.012 608 24 PKK3.2019.013 274 42
90.8 63.5 M18x1.5 ISO 6149-1 PKK3.2018.102 622 24 PKK3.2018.103 287 42
90.3 63 M22x1.5 ISO 6149-1 PKK3.2022.102 605 24 PKK3.2022.103 270 42
94.3 67 M26x1.5 ISO 6149-1 PKK3.2026.102 602 24 PKK3.2026.103 267 42
94.3 67 M30x1.5 ISO 6149-1 PKK3.2030.102 575 24 PKK3.2030.103 241 42
IG 2 90.3 63 3/4"-16 UNF 2B SAE J 1926-1 PKK3.2019.032 615 24 PKK3.2019.033 280 42
94.3 67 7/8"-14 UNF 2B SAE J 1926-1 PKK3.2023.032 627 24 PKK3.2023.033 292 42
94.3 67 1"1/16-12 UN 2B SAE J 1926-1 PKK3.2027.032 597 24 PKK3.2027.033 263 42
AG 1 95.8 68.5 18.5 1"1/16-12 UN 2A SAE J 1926-3 PKK3.2027.332 589 24 PKK3.2027.333 255 42
AG 2 96 68.7 16.7 3/4"-16 UNF 2A SAE J 514 PKK3.2019.302 569 24 PKK3.2019.303 234 42
98.6 71.3 19.3 7/8"-14 UNF 2A SAE J 514 PKK3.2023.302 585 24 PKK3.2023.303 250 42
101.3 74 22 1"1/16-12 UN 2A SAE J 514 PKK3.2027.302 593 24 PKK3.2027.303 259 42
AGS 2 116.9 89.6 36.6 3/4"-16 UNF 2A SAE J 514 PKK3.2019.502 608 10 PKK3.2019.503 273 30
120.4 93.1 41.1 7/8"-14 UNF 2A SAE J 514 PKK3.2023.502 612 10 PKK3.2023.503 278 30
124.7 97.4 45.4 1"1/16-12 UN 2A SAE J 514 PKK3.2027.502 645 10 PKK3.2027.503 310 30
AG 5 98.3 71 16 BSP 3/4" DIN 3852-2-A PKK3.2019.712 594 24 PKK3.2019.713 260 42
AG 3 90.3 63 11 12L M18x1.5 ISO 8434-1-L PKK3.2018.302 561 24 PKK3.2018.303 226 42
91.3 64 12 15L M22x1.5 ISO 8434-1-L PKK3.2022.302 565 24 PKK3.2022.303 231 42
91.3 64 12 18L M26x1.5 ISO 8434-1-L PKK3.2026.302 572 24 PKK3.2026.303 237 42
93.3 66 14 22L M30x2 ISO 8434-1-L PKK3.2030.302 575 24 PKK3.2030.303 241 42
91.3 64 12 10S M18x1.5 ISO 8434-1-S PKK3.2018.402 564 24 PKK3.2018.403 230 42
91.3 64 12 12S M20x1.5 ISO 8434-1-S PKK3.2020.402 567 24 PKK3.2020.403 232 42
93.3 66 14 14S M22x1.5 ISO 8434-1-S PKK3.2022.402 571 24 PKK3.2022.403 236 42
93.3 66 14 16S M24x1.5 ISO 8434-1-S PKK3.2024.402 574 24 PKK3.2024.403 239 42
95.3 68 16 20S M30x2 ISO 8434-1-S PKK3.2030.402 588 24 PKK3.2030.403 253 42
THREADS
AG 5 AGS 2

PKK3
(pcs.) (pcs.)
AGS 3 105.3 78 26 12L M18x1.5 ISO 8434-1-L PKK3.2018.502 589 10 PKK3.2018.503 254 30
106.3 79 27 15L M22x1.5 ISO 8434-1-L PKK3.2022.502 614 10 PKK3.2022.503 279 30
106.3 79 27 18L M26x1.5 ISO 8434-1-L PKK3.2026.502 646 10 PKK3.2026.503 311 30
113.3 86 34 22L M30x2 ISO 8434-1-L PKK3.2030.502 682 10 PKK3.2030.503 348 30
106.3 79 27 10S M18x1.5 ISO 8434-1-S PKK3.2018.602 597 10 PKK3.2018.603 262 30
106.3 79 27 12S M20x1.5 ISO 8434-1-S PKK3.2020.602 608 10 PKK3.2020.603 273 30
108.3 81 29 14S M22x1.5 ISO 8434-1-S PKK3.2022.602 623 10 PKK3.2022.603 289 30
108.3 81 29 16S M24x1.5 ISO 8434-1-S PKK3.2024.602 631 10 PKK3.2024.603 296 30
113.3 86 34 20S M30x2 ISO 8434-1-S PKK3.2030.602 677 10 PKK3.2030.603 343 30
AGS 4 117.8 90.5 38.5 1"-14 UNS 2A SAE J 1453 PKK3.2025.532 644 10 PKK3.2025.533 310 30
119.3 92 40 1"3/16-12 UN 2A SAE J 1453 PKK3.2030.532 687 10 PKK3.2030.533 353 30
THREADS
AGS 3 AGS 4

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PKK3
13 3 12.5 SPAV.13002 35 250 26 20 SPAV.13003 29 250 26 21 PVC

13 3 12.5 SPAV.13012 35 250 26 20 SPAV.13013 29 250 26 21 PVC
13 3 12.5 SPAV.13022 35 250 26 20 SPAV.13023 29 250 26 21 PVC
13 3 12.5 SPAV.13032 35 250 26 20 SPAV.13033 29 250 26 21 PVC
13 3 12.5 SPAV.13042 35 250 26 20 SPAV.13043 29 250 26 21 PVC
13 3 12.5 SPAV.13052 35 250 26 20 SPAV.13053 29 250 26 21 PVC
13 3 12.5 SPAV.13062 35 250 26 20 SPAV.13063 29 250 26 21 PVC
20 4 20 SPAV.20002 42 270 36 33 SPAV.20003 36.5 270 36 39 PVC
20 4 20 SPAV.20012 42 270 36 33 SPAV.20013 36.5 270 36 39 PVC
20 4 20 SPAV.20032 42 270 36 33 SPAV.20033 36.5 270 36 39 PVC
20 4 20 SPAV.20042 42 270 36 33 SPAV.20043 36.5 270 36 39 PVC
20 4 20 SPAV.20052 42 270 36 33 SPAV.20053 36.5 270 36 39 PVC
20 4 20 SPAV.20062 42 270 36 33 SPAV.20063 36.5 270 36 39 PVC

13 3 12.5 SPPV.13302 46 18.4 24 SPPV.13303 46 33 60 Nylon

13 3 12.5 SPPV.13312 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13322 46 18.4 24 - - - - Nylon
13 3 12.5 SPPV.13332 46 18.4 24 SPPV.13333 46 33 60 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 SPPV.13343 46 33 60 Nylon

13 3 12.5 PPV.013.120 PPV.013.130

20 4 20 PAV.019.120 PAV.019.130

PPK3
PUSH PULL
CONNESSIONE IN PRESSIONE
CONNECTION UNDER PRESSURE
ANSCHLUSS UNTER DRUCK
CONNEXION SOUS PRESSION

(solo lato maschio)
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Material: steel 13 3 12.5 10.5 25 45 90 See PPV 130 120 2.7

(male side only)

• Kuppeln unter Druck: erlaubt (nur Steckerseite)

(seulement côté male)

PPK3
PPK3 DN13 - BG 3 - ISO 12.5
THREADS CH2 L2 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE

COD. F Weight (g) Packaging (pcs.)
IG 1 27 107.3 BSP 1/2" DIN 3852-2-X PPK3.1313.112 575 35

27 107.3 NPT 1/2" ANSI B1.20.3 PPK3.1313.012 577 35
IG 2 27 107.3 3/4"-16 UNF 2B SAE J 1926-1 PPK3.1319.032 580 35
30 109.3 7/8"-14 UNF 2B SAE J 1926-1 PPK3.1323.032 569 35
32 111.3 1"1/16-14 UNF 2B SAE J 1926-1 PPK3.1327.032 577 35
AG 1 32 112.5 14 BSP 1/2" DIN 3852-2-A PPK3.1313.212 559 35
32 113.3 14 M18x1.5 ISO 6149-2 PPK3.1318.222 563 35
32 111.5 15 M22x1.5 ISO 6149-2 PPK3.1322.222 554 35
32 107.5 11.1 3/4"-16 UNF 2A SAE J 1926-3 PPK3.1319.332 576 35
32 113.7 12.7 7/8"-14 UNF 2A SAE J 1926-3 PPK3.1323.332 579 35
32 110.8 15.1 1"1/16 -12UN 2A SAE J 1926-3 PPK3.1327.332 564 35
AG 6 32 110.3 14 M22x1.5 DIN 3852-11-E PPK3.1322.312 547 35
AG 4 32 108.6 12.8 13/16-16 UN 2A SAE J 1453 PPK3.1320.532 552 35
AGS 4 32 136.6 40.6 1"-14 UNS 2A SAE J 1453 PPK3.1325.532 645 35
32 138.6 41.7 1"3/16-12 UN 2A SAE J 1453 PPK3.1330.532 680 35
AG 5 32 110.3 12 BSP 3/8" DIN 3852-2-A PPK3.1310.712 546 35
32 111.5 14 M22x1.5 DIN 3852-1-A PPK3.1322.712 556 35
AGS 1 32 132.8 35 BSP 3/8" DIN 3863-U PPK3.1310.752 573 35
32 132.5 35 BSP 1/2" DIN 3863-U PPK3.1313.752 586 35
32 130.7 35 BSP 5/8" DIN 3863-U PPK3.1322.752 579 35
AG 2 32 112.5 16.7 3/4"-16 UNF 2A SAE J 514 PPK3.1319.302 549 35
32 115.1 19.3 7/8"-14 UNF 2A SAE J 514 PPK3.1323.302 557 35
32 117 22 1"1/16-14 UNF 2A SAE J 514 PPK3.1327.302 569 35
AGS 2 32 133.5 37.6 3/4"-16 UNF 2A SAE J 514 PPK3.1319.502 578 35
32 137 41.1 7/8"-14 UNF 2A SAE J 514 PPK3.1323.502 594 35
AG 3 32 107.8 12 12S M20x1.5 ISO 8434-1-S PPK3.1320.402 545 35
AGS 3 32 121.5 26 12L M18x1.5 ISO 8434-1-L PPK3.1318.502 567 35
32 123.5 27 15L M22x1.5 ISO 8434-1-L PPK3.1322.502 599 35
32 123.5 27 12S M20x1.5 ISO 8434-1-S PPK3.1320.602 594 35
32 124.5 29 16S M24x1.5 ISO 8434-1-S PPK3.1324.602 612 35
AGS 5 32 134.8 39 M22x1.5 DIN 7463 PPK3.1322.902 570 35
IG 1 IG 2 AG 1 AG 2 AG 3 AG 4 AG 5
THREADS
AG 6 AGS 1 AGS 2 AGS 3 AGS 4 AGS 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPK3
PLASTIC CAPS NOMINAL SIZE FEMALE DUST PLUG COLOR MATERIAL

Dimensions Weight
DNP BG ISO COD. F D L D1 (g)
13 3 12.5 SPAV.13002 35 250 26 20 PVC

13 3 12.5 SPAV.13012 35 250 26 20 PVC
13 3 12.5 SPAV.13022 35 250 26 20 PVC
13 3 12.5 SPAV.13032 35 250 26 20 PVC
13 3 12.5 SPAV.13042 35 250 26 20 PVC
13 3 12.5 SPAV.13052 35 250 26 20 PVC
13 3 12.5 SPAV.13062 35 250 26 20 PVC

Dimensions Weight
13 3 12.5 SPPV.13302 46 18.4 24 Nylon

13 3 12.5 SPPV.13312 46 18.4 24 Nylon
13 3 12.5 SPPV.13322 46 18.4 24 Nylon
13 3 12.5 SPPV.13332 46 18.4 24 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 Nylon

13 3 12.5 PAV.013.120 PAV.013.130

PPK4
PUSH PULL
CONNESSIONE IN PRESSIONE
CONNECTION UNDER PRESSURE
ANSCHLUSS UNTER DRUCK
CONNEXION SOUS PRESSION

(lato maschio e lato femmina)
Technical data E
Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Occlusion: decompression valve Nominal size
• Material: steel
13 3 12.5 10.5 25 45 90 See PPV 130 120 2.7
• Threads: BSP - NPT - SAE - METRICS 1 MPa = 145.04 psi • 1 l = 0.264 gal
(both male and female side)

(Steckerseite und Muffeseite)

(côté male et femelle)

PPK4
PPK4 DN13 - BG 3 - ISO 12.5
THREADS CH2 L2 L4 ØT F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE

COD. F Weight (g) Packaging (pcs.)
IG 1 27 107.3 BSP 1/2" DIN 3852-2-X PPK4.1313.112 575 35

27 107.3 NPT 1/2" ANSI B1.20.3 PPK4.1313.012 577 35
IG 2 27 107.3 3/4"-16 UNF 2B SAE J 1926-1 PPK4.1319.032 580 35
30 109.3 7/8"-14 UNF 2B SAE J 1926-1 PPK4.1323.032 569 35
32 111.3 1"1/16-14 UNF 2B SAE J 1926-1 PPK4.1327.032 577 35
AG 1 32 112.5 14 BSP 1/2" DIN 3852-2-A PPK4.1313.212 559 35
32 113.3 14 M18x1.5 ISO 6149-2 PPK4.1318.222 563 35
32 111.5 15 M22x1.5 ISO 6149-2 PPK4.1322.222 554 35
32 107.5 11.1 3/4"-16 UNF 2A SAE J 1926-3 PPK4.1319.332 576 35
32 113.7 12.7 7/8"-14 UNF 2A SAE J 1926-3 PPK4.1323.332 579 35
32 110.8 15.1 1"1/16 -12UN 2A SAE J 1926-3 PPK4.1327.332 564 35
AG 6 32 110.3 14 M22x1.5 DIN 3852-11-E PPK4.1322.312 547 35
AG 4 32 108.6 12.8 13/16-16 UN 2A SAE J 1453 PPK4.1320.532 552 35
AGS 4 32 136.6 40.6 1"-14 UNS 2A SAE J 1453 PPK4.1325.532 645 35
32 138.6 41.7 1"3/16-12 UN 2A SAE J 1453 PPK4.1330.532 680 35
AG 5 32 110.3 12 BSP 3/8" DIN 3852-2-A PPK4.1310.712 546 35
32 111.5 14 M22x1.5 DIN 3852-1-A PPK4.1322.712 556 35
AGS 1 32 132.8 35 BSP 3/8" DIN 3863-U PPK4.1310.752 573 35
32 132.5 35 BSP 1/2" DIN 3863-U PPK4.1313.752 586 35
32 130.7 35 BSP 5/8" DIN 3863-U PPK4.1322.752 579 35
AG 2 32 112.5 16.7 3/4"-16 UNF 2A SAE J 514 PPK4.1319.302 549 35
32 115.1 19.3 7/8"-14 UNF 2A SAE J 514 PPK4.1323.302 557 35
32 117 22 1"1/16-14 UNF 2A SAE J 514 PPK4.1327.302 569 35
AGS 2 32 133.5 37.6 3/4"-16 UNF 2A SAE J 514 PPK4.1319.502 578 35
32 137 41.1 7/8"-14 UNF 2A SAE J 514 PPK4.1323.502 594 35
AG 3 32 107.8 12 12S M20x1.5 ISO 8434-1-S PPK4.1320.402 545 35
AGS 3 32 121.5 26 12L M18x1.5 ISO 8434-1-L PPK4.1318.502 567 35
32 123.5 27 15L M22x1.5 ISO 8434-1-L PPK4.1322.502 599 35
32 123.5 27 12S M20x1.5 ISO 8434-1-S PPK4.1320.602 594 35
32 124.5 29 16S M24x1.5 ISO 8434-1-S PPK4.1324.602 612 35
AGS 5 32 134.8 39 M22x1.5 DIN 7463 PPK4.1322.902 570 35
THREADS
AG 6 AGS 1 AGS 2 AGS 3 AGS 4 AGS 5
www.dnp.it 225
ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PPK4
PLASTIC CAPS NOMINAL SIZE FEMALE DUST PLUG COLOR MATERIAL

Dimensions Weight
DNP BG ISO COD. F D L D1 (g)
13 3 12.5 SPAV.13002 35 250 26 20 PVC

13 3 12.5 SPAV.13012 35 250 26 20 PVC
13 3 12.5 SPAV.13022 35 250 26 20 PVC
13 3 12.5 SPAV.13032 35 250 26 20 PVC
13 3 12.5 SPAV.13042 35 250 26 20 PVC
13 3 12.5 SPAV.13052 35 250 26 20 PVC
13 3 12.5 SPAV.13062 35 250 26 20 PVC

Dimensions Weight
13 3 12.5 SPPV.13302 46 18.4 24 Nylon

13 3 12.5 SPPV.13312 46 18.4 24 Nylon
13 3 12.5 SPPV.13322 46 18.4 24 Nylon
13 3 12.5 SPPV.13332 46 18.4 24 Nylon
13 3 12.5 SPPV.13342 46 18.4 24 Nylon

13 3 12.5 PAV.013.120 PAV.013.130

PVV3
SCREW/ISO 14541
INNESTI A VITE/ACCIAIO
SCREW COUPLINGS/STEEL
COLOR
SCHRAUBKUPPLUNGEN/STAHL CODE
COUPLEURS A VISSER/ACIER

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Standard: ISO 14541 (DN06→DN20) DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
06 1 6.3 5 45 12 17 190 270 250 0.8
• Locking: screw
• Material: steel 10 2 10 8.5 40 23 46 130 150 180 1.4
• Finishing: Zn-Fe (Cr III) 13 3 12.5 10.5 40 45 90 120 150 140 2.7
• Threads: BSP - NPT - SAE - METRICS 20 4 20 15.7 30 106 190 100 130 140 9.3
25 5 25 17.3 30 189 280 100 130 140 16
30 6 31.5 29.6 30 288 480 100 100 100 30
• Norm: ISO 14541 (DN06→DN20)



PVV3
PVV3 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 59 58 BSP 1/4" DIN 3852-2-X PVV3.0606.112 126 120 PVV3.0606.113 177 45
59 58 NPT 1/4" ANSI B1.20.3 PVV3.0606.012 128 120 PVV3.0606.013 178 45
AG 3 58 57 10 08L M14x1.5 ISO 8434-1-L PVV3.0614.302 115 120 PVV3.0614.303 166 45
AGS 3 73 73 25 08L M14x1.5 ISO 8434-1-L PVV3.0614.502 136 100 PVV3.0614.503 186 45
THREADS
IG 1 AG 3 AGS 3

PVV3
PVV3 DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 64 61.2 BSP 1/4" DIN 3852-2-X PVV3.1006.112 166 76 PVV3.1006.113 171 45
64 61.2 NPT 1/4" ANSI B1.20.3 PVV3.1006.012 167 76 PVV3.1006.013 172 45
64 61.2 RC 1/4" UNI ISO 7/1 PVV3.1006.042 169 76 PVV3.1006.043 174 45
64 61.2 BSP 3/8" DIN 3852-2-X PVV3.1010.112 157 76 PVV3.1010.113 162 45
64 61.2 NPT 3/8" ANSI B1.20.3 PVV3.1010.012 159 76 PVV3.1010.013 164 45
64 61.2 M16x1.5 ISO 6149-1 PVV3.1016.102 160 76 PVV3.1016.103 165 45
64 61.2 M18x1.5 ISO 6149-1 PVV3.1018.102 153 76 PVV3.1018.103 158 45
IG 2 64 61.2 9/16"-18 UNF 2B SAE J 1926-1 PVV3.1015.032 163 76 PVV3.1015.033 168 45
AG 2 65.9 63.1 14.1 9/16"-18 UNF 2A SAE J 514 PVV3.1015.302 151 76 PVV3.1015.303 156 45
AGS 2 85.1 82.3 33.3 9/16"-18 UNF 2A SAE J 514 PVV3.1015.502 164 76 PVV3.1015.503 169 45
AG 5 66.3 63.5 12 BSP 3/8" DIN 3852-2-B PVV3.1010.212 159 76 PVV3.1010.213 164 45
65.8 63 12 BSP 1/4" DIN 3852-2-A PVV3.1006.712 154 76 PVV3.1006.713 159 45
66.3 63.5 12 BSP 3/8" DIN 3852-2-A PVV3.1010.712 159 76 PVV3.1010.713 164 45
AG 7 65.8 63 14 NPT 1/4" ANSI B1.20.3 PVV3.1006.022 153 76 PVV3.1006.023 158 45
65.8 63 14 R 1/4"-19 UNI ISO 7/1 PVV3.1006.052 153 76 PVV3.1006.053 158 45
AG 3 61.8 59 10 06L M12x1.5 ISO 8434-1-L PVV3.1012.302 148 76 PVV3.1012.303 153 45
61.8 59 10 08L M14x1.5 ISO 8434-1-L PVV3.1014.302 149 76 PVV3.1014.303 154 45
62.8 60 11 10L M16x1.5 ISO 8434-1-L PVV3.1016.302 150 76 PVV3.1016.303 155 45
62.8 60 11 12L M18x1.5 ISO 8434-1-L PVV3.1018.302 151 76 PVV3.1018.303 156 45
63.8 61 12 08S M16x1.5 ISO 8434-1-S PVV3.1016.402 154 76 PVV3.1016.403 159 45
63.8 61 12 10S M18x1.5 ISO 8434-1-S PVV3.1018.402 156 76 PVV3.1018.403 161 45
63.8 61 12 12S M20x1.5 ISO 8434-1-S PVV3.1020.402 158 76 PVV3.1020.403 163 45
AGS 3 77.8 75 26 06L M12x1.5 ISO 8434-1-L PVV3.1012.502 165 76 PVV3.1012.503 170 45
77.8 75 26 08L M14x1.5 ISO 8434-1-L PVV3.1014.502 169 76 PVV3.1014.503 174 45
77.8 75 26 10L M16x1.5 ISO 8434-1-L PVV3.1016.502 175 76 PVV3.1016.503 180 45
77.8 75 26 12L M18x1.5 ISO 8434-1-L PVV3.1018.502 180 76 PVV3.1018.503 185 45
78.8 76 27 08S M16x1.5 ISO 8434-1-S PVV3.1016.602 183 76 PVV3.1016.603 188 45
78.8 76 27 10S M18x1.5 ISO 8434-1-S PVV3.1018.602 190 76 PVV3.1018.603 195 45
78.8 76 27 12S M20x1.5 ISO 8434-1-S PVV3.1020.602 199 76 PVV3.1020.603 204 45
THREADS
AG 7 AGS 2 AGS 3

PVV3
PVV3 DN13 - BG 3 - ISO 12.5 (T)
THREADS CH2 L2 CH3 L3 L4 ØT F STANDARD FEMMINA - FEMALE -MUFFE - FEMELLE MASCHIO - MALE - STECKER -MALE
(g) (pcs.) (g) (pcs.)
IG 1 30 67 30 64.5 BSP 3/8" DIN 3852-2-X PVV3.1310.112 316 40 PVV3.1310.113 271 30
30 69.5 30 67 NPT 3/8" ANSI B1.20.3 PVV3.1310.012 342 40 PVV3.1310.013 297 30
30 69.5 30 65 RC 3/8" UNI ISO 7/1 PVV3.1310.042 337 40 PVV3.1310.043 292 30
30 67 30 64.5 BSP 1/2" DIN 3852-2-X PVV3.1313.112 312 40 PVV3.1313.113 267 30
30 70 30 67.5 NPT 1/2" ANSI B1.20.3 PVV3.1313.012 326 40 PVV3.1313.013 281 30
30 71.5 30 69 RC 1/2" UNI ISO 7/1 PVV3.1313.042 333 40 PVV3.1313.043 288 30
36 72.5 36 70 BSP 3/4" DIN 3852-2-X PVV3.1319.112 365 40 PVV3.1319.113 320 30
36 72.5 36 70 NPT 3/4" ANSI B1.20.3 PVV3.1319.012 374 40 PVV3.1319.013 329 30
30 67 30 64.5 M14x1.5 ISO 6149-1 PVV3.1314.102 325 40 PVV3.1314.103 280 30
30 67 30 64.5 M16x1.5 ISO 6149-1 PVV3.1316.102 319 40 PVV3.1316.103 274 30
30 67 30 64.5 M18x1.5 ISO 6149-1 PVV3.1318.102 313 40 PVV3.1318.103 268 30
30 67 30 64.5 M20x1.5 ISO 6149-1 PVV3.1320.102 316 40 PVV3.1320.103 271 30
IG 2 30 67 30 64.5 9/16"-18 UNF 2B SAE J 1926-1 PVV3.1315.032 323 40 PVV3.1315.033 278 30
30 67 30 64.5 3/4"-16 UNF 2B SAE J 1926-1 PVV3.1319.032 318 40 PVV3.1319.033 273 30
30 71 30 68.5 7/8"-14 UNF 2B SAE J 1926-1 PVV3.1323.032 317 40 PVV3.1323.033 272 30
30 69 30 66.5 M16x1.5 SAE J 2244/1 PVV3.1316.112 333 40 PVV3.1316.113 288 30
30 67 30 64.5 M22x1.5 SAE J 2244/1 PVV3.1322.102 320 40 PVV3.1322.103 275 30
AG 1 27 67.1 27 64.6 11.1 3/4"-16 UNF 2A SAE J 1926-3 PVV5.1319.332 283 40 PVV5.1319.333 238 30
30 70 30 67.5 16 M20x1.5 ISO 6149-2 PVV3.1320.222 303 40 PVV3.1320.223 258 30
AG 2 30 68.1 30 65.6 14.1 9/16"-18 UNF 2A SAE J 514 PVV3.1315.302 284 40 PVV3.1315.303 239 30
30 70.7 30 68.2 16.7 3/4"-16 UNF 2A SAE J 514 PVV3.1319.302 293 40 PVV3.1319.303 248 30
AGS 2 30 91.6 30 89.1 37.6 3/4"-16 UNF 2A SAE J 514 PVV3.1319.502 320 40 PVV3.1319.503 275 30
30 95.1 30 92.6 41.1 7/8"-14 UNF 2A SAE J 514 PVV3.1323.502 336 40 PVV3.1323.503 291 30
AG 5 30 68.5 30 66 12 BSP 3/8" DIN 3852-2-B PVV3.1310.212 294 40 PVV3.1310.213 249 30
30 71 30 68.5 13 BSP 1/2" DIN 3852-2-B PVV3.1313.212 302 40 PVV3.1313.213 257 30
30 65 30 62.5 11 M16x1.5 DIN 3863-U PVV3.1316.702 286 40 PVV3.1316.703 241 30
30 70 30 67.5 16 M20x1.5 DIN 3863-U PVV3.1320.702 299 40 PVV3.1320.703 254 30
30 68 30 65.5 14 M22x1.5 DIN 3863-U PVV3.1322.702 296 40 PVV3.1322.703 251 30
THREADS

PVV3
PVV3 DN13 - BG 3 - ISO 12.5 (T)
(g) (pcs.) (g) (pcs.)
AG 3 30 64 30 61.5 10 08L M14x1.5 ISO 8434-1-L PVV3.1314.302 284 40 PVV3.1314.303 239 30
30 65 30 62.5 11 10L M16x1.5 ISO 8434-1-L PVV3.1316.302 285 40 PVV3.1316.303 240 30
30 65 30 62.5 11 12L M18x1.5 ISO 8434-1-L PVV3.1318.302 286 40 PVV3.1318.303 241 30
30 66 30 63.5 12 15L M22x1.5 ISO 8434-1-L PVV3.1322.302 291 40 PVV3.1322.303 246 30
30 66 30 63.5 12 18L M26x1.5 ISO 8434-1-L PVV3.1326.302 296 40 PVV3.1326.303 251 30
30 66 30 63.5 12 10S M18x1.5 ISO 8434-1-S PVV3.1318.402 291 40 PVV3.1318.403 246 30
30 66 30 63.5 12 12S M20x1.5 ISO 8434-1-S PVV3.1320.402 293 40 PVV3.1320.403 248 30
30 68 30 65.5 14 14S M22x1.5 ISO 8434-1-S PVV3.1322.402 298 40 PVV3.1322.403 253 30
30 68 30 65.5 14 16S M24x1.5 ISO 8434-1-S PVV3.1324.402 299 40 PVV3.1324.403 254 30
30 71 30 68.5 16 20S M30x2 ISO 8434-1-S PVV3.1330.402 315 40 PVV3.1330.403 270 30
AGS 3 30 80 30 77.5 26 08L M14x1.5 ISO 8434-1-L PVV3.1314.502 297 40 PVV3.1314.503 252 30
30 80 30 77.5 26 10L M16x1.5 ISO 8434-1-L PVV3.1316.502 300 40 PVV3.1316.503 255 30
30 80 30 77.5 26 12L M18x1.5 ISO 8434-1-L PVV3.1318.502 302 40 PVV3.1318.503 257 30
30 90 30 87.5 36 12L M18x1.5 ISO 8434-1-L PVV3.1318.512 322 40 PVV3.1318.513 277 30
30 81 30 78.5 27 15L M22x1.5 ISO 8434-1-L PVV3.1322.502 317 40 PVV3.1322.503 272 30
30 81 30 78.5 27 18L M26x1.5 ISO 8434-1-L PVV3.1326.502 334 40 PVV3.1326.503 289 30
30 81 30 78.5 27 10S M18x1.5 ISO 8434-1-S PVV3.1318.602 313 40 PVV3.1318.603 268 30
30 81 30 78.5 27 12S M20x1.5 ISO 8434-1-S PVV3.1320.602 318 40 PVV3.1320.603 273 30
30 83 30 80.5 29 14S M22x1.5 ISO 8434-1-S PVV3.1322.602 329 40 PVV3.1322.603 284 30
30 83 30 80.5 29 16S M24x1.5 ISO 8434-1-S PVV3.1324.602 333 40 PVV3.1324.603 288 30
30 83 30 80.5 29 20S M30x2 ISO 8434-1-S PVV3.1330.602 364 40 PVV3.1330.603 319 30
27 80 27 77.5 26 12L M18x1.5 ISO 8434-1-L PVV5.1318.502 289 40 PVV5.1318.503 244 30
27 81 27 78.5 27 15L M22x1.5 ISO 8434-1-L PVV5.1322.502 305 40 PVV5.1322.503 260 30
THREADS
AG 3 AGS 3

PVV3
PVV3 DN13 - BG 3 - ISO 12.5 (E)
(g) (pcs.) (g) (pcs.)
IG 1 30 67 30 64.5 BSP 3/8" DIN 3852-2-X PVV3.1310.112 316 40 PVV3.1310.113 E 293 30
30 69.5 30 67 NPT 3/8" ANSI B1.20.3 PVV3.1310.012 342 40 PVV3.1310.013 E 319 30
30 69.5 30 65 RC 3/8" UNI ISO 7/1 PVV3.1310.042 337 40 PVV3.1310.043 E 314 30
30 67 30 64.5 BSP 1/2" DIN 3852-2-X PVV3.1313.112 312 40 PVV3.1313.113 E 289 30
30 70 30 67.5 NPT 1/2" ANSI B1.20.3 PVV3.1313.012 326 40 PVV3.1313.013 E 303 30
30 71.5 30 69 RC 1/2" UNI ISO 7/1 PVV3.1313.042 333 40 PVV3.1313.043 E 310 30
36 72.5 36 70 BSP 3/4" DIN 3852-2-X PVV3.1319.112 365 40 PVV3.1319.113 E 342 30
36 72.5 36 70 NPT 3/4" ANSI B1.20.3 PVV3.1319.012 374 40 PVV3.1319.013 E 351 30
30 67 30 64.5 M14x1.5 ISO 6149-1 PVV3.1314.102 325 40 PVV3.1314.103 E 302 30
30 67 30 64.5 M16x1.5 ISO 6149-1 PVV3.1316.102 319 40 PVV3.1316.103 E 296 30
30 67 30 64.5 M18x1.5 ISO 6149-1 PVV3.1318.102 313 40 PVV3.1318.103 E 290 30
30 67 30 64.5 M20x1.5 ISO 6149-1 PVV3.1320.102 316 40 PVV3.1320.103 E 293 30
IG 2 30 67 30 64.5 9/16"-18 UNF 2B SAE J 1926-1 PVV3.1315.032 323 40 PVV3.1315.033 E 300 30
30 67 30 64.5 3/4"-16 UNF 2B SAE J 1926-1 PVV3.1319.032 318 40 PVV3.1319.033 E 295 30
30 71 30 68.5 7/8"-14 UNF 2B SAE J 1926-1 PVV3.1323.032 317 40 PVV3.1323.033 E 294 30
30 69 30 66.5 M16x1.5 SAE J 2244/1 PVV3.1316.112 333 40 PVV3.1316.113 E 310 30
30 67 30 64.5 M22x1.5 SAE J 2244/1 PVV3.1322.102 320 40 PVV3.1322.103 E 297 30
AG 1 27 67.1 27 64.6 11.1 3/4"-16 UNF 2A SAE J 1926-3 PVV5.1319.332 283 40 PVV5.1319.333 E 260 30
30 70 30 67.5 16 M20x1.5 ISO 6149-2 PVV3.1320.222 303 40 PVV3.1320.223 E 280 30
AG 2 30 68.1 30 65.6 14.1 9/16"-18 UNF 2A SAE J 514 PVV3.1315.302 284 40 PVV3.1315.303 E 261 30
30 70.7 30 68.2 16.7 3/4"-16 UNF 2A SAE J 514 PVV3.1319.302 293 40 PVV3.1319.303 E 270 30
AGS 2 30 91.6 30 89.1 37.6 3/4"-16 UNF 2A SAE J 514 PVV3.1319.502 320 40 PVV3.1319.503 E 297 30
30 95.1 30 92.6 41.1 7/8"-14 UNF 2A SAE J 514 PVV3.1323.502 336 40 PVV3.1323.503 E 313 30
AG 5 30 68.5 30 66 12 BSP 3/8" DIN 3852-2-B PVV3.1310.212 294 40 PVV3.1310.213 E 271 30
30 71 30 68.5 13 BSP 1/2" DIN 3852-2-B PVV3.1313.212 302 40 PVV3.1313.213 E 279 30
30 65 30 62.5 11 M16x1.5 DIN 3863-U PVV3.1316.702 286 40 PVV3.1316.703 E 263 30
30 70 30 67.5 16 M20x1.5 DIN 3863-U PVV3.1320.702 299 40 PVV3.1320.703 E 276 30
30 68 30 65.5 14 M22x1.5 DIN 3863-U PVV3.1322.702 296 40 PVV3.1322.703 E 273 30
THREADS

PVV3
PVV3 DN13 - BG 3 - ISO 12.5 (E)
(g) (pcs.) (g) (pcs.)
AG 3 30 64 30 61.5 10 08L M14x1.5 ISO 8434-1-L PVV3.1314.302 284 40 PVV3.1314.303 E 261 30
30 65 30 62.5 11 10L M16x1.5 ISO 8434-1-L PVV3.1316.302 285 40 PVV3.1316.303 E 262 30
30 65 30 62.5 11 12L M18x1.5 ISO 8434-1-L PVV3.1318.302 286 40 PVV3.1318.303 E 263 30
30 66 30 63.5 12 15L M22x1.5 ISO 8434-1-L PVV3.1322.302 291 40 PVV3.1322.303 E 268 30
30 66 30 63.5 12 18L M26x1.5 ISO 8434-1-L PVV3.1326.302 296 40 PVV3.1326.303 E 273 30
30 66 30 63.5 12 10S M18x1.5 ISO 8434-1-S PVV3.1318.402 291 40 PVV3.1318.403 E 268 30
30 66 30 63.5 12 12S M20x1.5 ISO 8434-1-S PVV3.1320.402 293 40 PVV3.1320.403 E 270 30
30 68 30 65.5 14 14S M22x1.5 ISO 8434-1-S PVV3.1322.402 298 40 PVV3.1322.403 E 275 30
30 68 30 65.5 14 16S M24x1.5 ISO 8434-1-S PVV3.1324.402 299 40 PVV3.1324.403 E 276 30
30 71 30 68.5 16 20S M30x2 ISO 8434-1-S PVV3.1330.402 315 40 PVV3.1330.403 E 292 30
AGS 3 30 80 30 77.5 26 08L M14x1.5 ISO 8434-1-L PVV3.1314.502 297 40 PVV3.1314.503 E 274 30
30 80 30 77.5 26 10L M16x1.5 ISO 8434-1-L PVV3.1316.502 300 40 PVV3.1316.503 E 277 30
30 80 30 77.5 26 12L M18x1.5 ISO 8434-1-L PVV3.1318.502 302 40 PVV3.1318.503 E 279 30
30 90 30 87.5 36 12L M18x1.5 ISO 8434-1-L PVV3.1318.512 322 40 PVV3.1318.513 E 299 30
30 81 30 78.5 27 15L M22x1.5 ISO 8434-1-L PVV3.1322.502 317 40 PVV3.1322.503 E 294 30
30 81 30 78.5 27 18L M26x1.5 ISO 8434-1-L PVV3.1326.502 334 40 PVV3.1326.503 E 311 30
30 81 30 78.5 27 10S M18x1.5 ISO 8434-1-S PVV3.1318.602 313 40 PVV3.1318.603 E 290 30
30 81 30 78.5 27 12S M20x1.5 ISO 8434-1-S PVV3.1320.602 318 40 PVV3.1320.603 E 295 30
30 83 30 80.5 29 14S M22x1.5 ISO 8434-1-S PVV3.1322.602 329 40 PVV3.1322.603 E 306 30
30 83 30 80.5 29 16S M24x1.5 ISO 8434-1-S PVV3.1324.602 333 40 PVV3.1324.603 E 310 30
30 83 30 80.5 29 20S M30x2 ISO 8434-1-S PVV3.1330.602 364 40 PVV3.1330.603 E 341 30
27 80 27 77.5 26 12L M18x1.5 ISO 8434-1-L PVV5.1318.502 289 40 PVV5.1318.503 E 266 30
27 81 27 78.5 27 15L M22x1.5 ISO 8434-1-L PVV5.1322.502 305 40 PVV5.1322.503 E 282 30
THREADS
AG 3 AGS 3

PVV3
PVV3 DN20 - BG 4 - ISO 20 (T)
(g) (pcs.) (g) (pcs.)
IG 1 83.5 76.5 BSP 1/2" DIN 3852-2-X PVV3.2013.112 497 30 PVV3.2013.113 440 28
85 78 NPT 1/2" ANSI B1.20.3 PVV3.2013.012 510 30 PVV3.2013.013 453 28
85 78 RC 1/2" UNI ISO 7/1 PVV3.2013.042 511 30 PVV3.2013.043 454 28
85.5 78.5 BSP 3/4" DIN 3852-2-X PVV3.2019.112 477 30 PVV3.2019.113 420 28
85 78 NPT 3/4" ANSI B1.20.3 PVV3.2019.012 482 30 PVV3.2019.013 426 28
85 78 RC 3/4" UNI ISO 7/1 PVV3.2019.042 485 30 PVV3.2019.043 429 28
81.5 74.5 M18x1.5 ISO 6149-1 PVV3.2018.102 496 30 PVV3.2018.103 439 28
81 74 M22x1.5 ISO 6149-1 PVV3.2022.102 479 30 PVV3.2022.103 422 28
85 78 M26x1.5 ISO 6149-1 PVV3.2026.102 476 30 PVV3.2026.103 419 28
85 78 M30x1.5 ISO 6149-1 PVV3.2030.102 449 30 PVV3.2030.103 393 28
IG 2 81 74 3/4"-16 UNF 2B SAE J 1926-1 PVV3.2019.032 489 30 PVV3.2019.033 432 28
85 78 7/8"-14 UNF 2B SAE J 1926-1 PVV3.2023.032 501 30 PVV3.2023.033 444 28
85 78 1"1/16-12 UN 2B SAE J 1926-1 PVV3.2027.032 471 30 PVV3.2027.033 415 28
AG 1 86.5 79.5 18.5 1"1/16-12 UN 2A SAE J 1926-3 PVV3.2027.332 464 30 PVV3.2027.333 408 28
AG 2 86.7 79.7 16.7 3/4"-16 UNF 2A SAE J 514 PVV3.2019.302 443 30 PVV3.2019.303 386 28
89.3 82.3 19.3 7/8"-14 UNF 2A SAE J 514 PVV3.2023.302 452 30 PVV3.2023.303 395 28
92 85 22 1"1/16-12 UN 2A SAE J 514 PVV3.2027.302 467 30 PVV3.2027.303 411 28
AGS 2 107.6 100.6 36.6 3/4"-16 UNF 2A SAE J 514 PVV3.2019.502 482 10 PVV3.2019.503 425 28
111.1 104.1 41.1 7/8"-14 UNF 2A SAE J 514 PVV3.2023.502 486 10 PVV3.2023.503 430 28
115.4 108.4 45.4 1"1/16-12 UN 2A SAE J 514 PVV3.2027.502 519 10 PVV3.2027.503 463 28
AG 5 89 82 16 BSP 3/4" DIN 3852-2-A PVV3.2019.712 468 30 PVV3.2019.713 412 28
AG 3 81 74 11 12L M18x1.5 ISO 8434-1-L PVV3.2018.302 435 30 PVV3.2018.303 378 28
82 75 12 15L M22x1.5 ISO 8434-1-L PVV3.2022.302 439 30 PVV3.2022.303 383 28
82 75 12 18L M26x1.5 ISO 8434-1-L PVV3.2026.302 446 30 PVV3.2026.303 389 28
84 77 14 22L M30x2 ISO 8434-1-L PVV3.2030.302 449 30 PVV3.2030.303 393 28
82 75 12 10S M18x1.5 ISO 8434-1-S PVV3.2018.402 438 30 PVV3.2018.403 382 28
82 75 12 12S M20x1.5 ISO 8434-1-S PVV3.2020.402 441 30 PVV3.2020.403 385 28
84 77 14 14S M22x1.5 ISO 8434-1-S PVV3.2022.402 445 30 PVV3.2022.403 388 28
84 77 14 16S M24x1.5 ISO 8434-1-S PVV3.2024.402 448 30 PVV3.2024.403 391 28
86 79 16 20S M30x2 ISO 8434-1-S PVV3.2030.402 462 30 PVV3.2030.403 405 28
THREADS
IG 1 IG 2 AG 1 AG 2 AG 3 AG 5 AGS 2

PVV3
PVV3 DN20 - BG 4 - ISO 20 (T)
(g) (pcs.) (g) (pcs.)
AGS 3 96 89 26 12L M18x1.5 ISO 8434-1-L PVV3.2018.502 451 10 PVV3.2018.503 394 25
97 90 27 15L M22x1.5 ISO 8434-1-L PVV3.2022.502 466 10 PVV3.2022.503 409 25
97 90 27 18L M26x1.5 ISO 8434-1-L PVV3.2026.502 483 10 PVV3.2026.503 427 25
104 97 34 22L M30x2 ISO 8434-1-L PVV3.2030.502 509 10 PVV3.2030.503 453 25
97 90 27 10S M18x1.5 ISO 8434-1-S PVV3.2018.602 459 10 PVV3.2018.603 402 25
97 90 27 12S M20x1.5 ISO 8434-1-S PVV3.2020.602 467 10 PVV3.2020.603 410 25
99 92 29 14S M22x1.5 ISO 8434-1-S PVV3.2022.602 475 10 PVV3.2022.603 419 25
99 92 29 16S M24x1.5 ISO 8434-1-S PVV3.2024.602 481 10 PVV3.2024.603 425 25
104 97 34 20S M30x2 ISO 8434-1-S PVV3.2030.602 504 10 PVV3.2030.603 448 25
AGS 4 108.5 101.5 38.5 1"-14 UNS 2A SAE J 1453 PVV3.2025.532 518 10 PVV3.2025.533 462 28
110 103 40 1"3/16-12 UN 2A SAE J 1453 PVV3.2030.532 562 10 PVV3.2030.533 505 20
PVV3 DN20 - BG 4 - ISO 20 (E)
(g) (pcs.) (g) (pcs.)
IG 1 83.5 76.5 BSP 1/2" DIN 3852-2-X PVV3.2013.112 497 30 PVV3.2013.113 E 563 20
85 78 NPT 1/2" ANSI B1.20.3 PVV3.2013.012 510 30 PVV3.2013.013 E 576 20
85 78 RC 1/2" UNI ISO 7/1 PVV3.2013.042 511 30 PVV3.2013.043 E 577 20
85.5 78.5 BSP 3/4" DIN 3852-2-X PVV3.2019.112 477 30 PVV3.2019.113 E 543 20
85 78 NPT 3/4" ANSI B1.20.3 PVV3.2019.012 482 30 PVV3.2019.013 E 549 20
85 78 RC 3/4" UNI ISO 7/1 PVV3.2019.042 485 30 PVV3.2019.043 E 552 20
81.5 74.5 M18x1.5 ISO 6149-1 PVV3.2018.102 496 30 PVV3.2018.103 E 562 20
81 74 M22x1.5 ISO 6149-1 PVV3.2022.102 479 30 PVV3.2022.103 E 545 20
85 78 M26x1.5 ISO 6149-1 PVV3.2026.102 476 30 PVV3.2026.103 E 542 20
85 78 M30x1.5 ISO 6149-1 PVV3.2030.102 449 30 PVV3.2030.103 E 516 20
IG 2 81 74 3/4"-16 UNF 2B SAE J 1926-1 PVV3.2019.032 489 30 PVV3.2019.033 E 555 20
85 78 7/8"-14 UNF 2B SAE J 1926-1 PVV3.2023.032 501 30 PVV3.2023.033 E 567 20
85 78 1"1/16-12 UN 2B SAE J 1926-1 PVV3.2027.032 471 30 PVV3.2027.033 E 538 20
AG 1 86.5 79.5 18.5 1"1/16-12 UN 2A SAE J 1926-3 PVV3.2027.332 464 30 PVV3.2027.333 E 530 28
AG 2 86.7 79.7 16.7 3/4"-16 UNF 2A SAE J 514 PVV3.2019.302 443 30 PVV3.2019.303 E 509 20
89.3 82.3 19.3 7/8"-14 UNF 2A SAE J 514 PVV3.2023.302 452 30 PVV3.2023.303 E 518 20
92 85 22 1"1/16-12 UN 2A SAE J 514 PVV3.2027.302 467 30 PVV3.2027.303 E 534 20
THREADS
IG 1 IG 2 AG 1 AG 2 AGS 3 AGS 4

PVV3
PVV3 DN20 - BG 4 - ISO 20 (E)
(g) (pcs.) (g) (pcs.)
AGS 2 107.6 100.6 36.6 3/4"-16 UNF 2A SAE J 514 PVV3.2019.502 482 10 PVV3.2019.503 E 548 20
111.1 104.1 41.1 7/8"-14 UNF 2A SAE J 514 PVV3.2023.502 486 10 PVV3.2023.503 E 553 20
115.4 108.4 45.4 1"1/16-12 UN 2A SAE J 514 PVV3.2027.502 519 10 PVV3.2027.503 E 586 20
AG 5 89 82 16 BSP 3/4" DIN 3852-2-A PVV3.2019.712 468 30 PVV3.2019.713 E 535 20
AG 3 81 74 11 12L M18x1.5 ISO 8434-1-L PVV3.2018.302 435 30 PVV3.2018.303 E 501 20
82 75 12 15L M22x1.5 ISO 8434-1-L PVV3.2022.302 439 30 PVV3.2022.303 E 506 20
82 75 12 18L M26x1.5 ISO 8434-1-L PVV3.2026.302 446 30 PVV3.2026.303 E 512 20
84 77 14 22L M30x2 ISO 8434-1-L PVV3.2030.302 449 30 PVV3.2030.303 E 516 20
82 75 12 10S M18x1.5 ISO 8434-1-S PVV3.2018.402 438 30 PVV3.2018.403 E 505 20
82 75 12 12S M20x1.5 ISO 8434-1-S PVV3.2020.402 441 30 PVV3.2020.403 E 508 20
84 77 14 14S M22x1.5 ISO 8434-1-S PVV3.2022.402 445 30 PVV3.2022.403 E 511 20
84 77 14 16S M24x1.5 ISO 8434-1-S PVV3.2024.402 448 30 PVV3.2024.403 E 514 20
86 79 16 20S M30x2 ISO 8434-1-S PVV3.2030.402 462 30 PVV3.2030.403 E 528 20
AGS 3 96 89 26 12L M18x1.5 ISO 8434-1-L PVV3.2018.502 451 10 PVV3.2018.503 E 517 18
97 90 27 15L M22x1.5 ISO 8434-1-L PVV3.2022.502 466 10 PVV3.2022.503 E 532 18
97 90 27 18L M26x1.5 ISO 8434-1-L PVV3.2026.502 483 10 PVV3.2026.503 E 550 18
104 97 34 22L M30x2 ISO 8434-1-L PVV3.2030.502 509 10 PVV3.2030.503 E 576 18
97 90 27 10S M18x1.5 ISO 8434-1-S PVV3.2018.602 459 10 PVV3.2018.603 E 525 18
97 90 27 12S M20x1.5 ISO 8434-1-S PVV3.2020.602 467 10 PVV3.2020.603 E 533 18
99 92 29 14S M22x1.5 ISO 8434-1-S PVV3.2022.602 475 10 PVV3.2022.603 E 542 18
99 92 29 16S M24x1.5 ISO 8434-1-S PVV3.2024.602 481 10 PVV3.2024.603 E 548 18
104 97 34 20S M30x2 ISO 8434-1-S PVV3.2030.602 504 10 PVV3.2030.603 E 571 18
AGS 4 108.5 101.5 38.5 1"-14 UNS 2A SAE J 1453 PVV3.2025.532 518 10 PVV3.2025.533 E 585 20
110 103 40 1"3/16-12 UN 2A SAE J 1453 PVV3.2030.532 562 10 PVV3.2030.533 E 628 20
THREADS

PVV3
PVV3 DN25 - BG 5 - ISO 25 (T)
(g) (pcs.) (g) (pcs.)
IG 1 41 100 41 87.5 BSP 3/4" DIN 3852-2-X PVV3.2519.112 837 10 PVV3.2519.113 T 696 18
41 100 41 87.5 NPT 3/4" ANSI B1.20.3 PVV3.2519.012 844 10 PVV3.2519.013 T 703 18
41 100 41 87.5 RC 3/4" UNI ISO 7/1 PVV3.2519.042 844 10 PVV3.2519.043 T 703 18
41 100 41 87.5 BSP 1" DIN 3852-2-X PVV3.2525.112 782 10 PVV3.2525.113 T 641 18
41 100 41 87.5 NPT 1" ANSI B1.20.3 PVV3.2525.012 795 10 PVV3.2525.013 T 654 18
41 100 41 87.5 M30x1.5 ISO 6149-1 PVV3.2530.102 810 10 PVV3.2530.103 T 669 18
IG 2 41 100 41 87.5 1"1/16-12 UN 2B SAE J 1926-1 PVV3.2527.032 831 10 PVV3.2527.033 T 690 18
41 100 41 87.5 1"5/16-12 UN 2B SAE J 1926-1 PVV3.2533.032 772 10 PVV3.2533.033 T 631 18
AG 2 41 104.1 41 91.6 23.1 1"5/16-12 UN 2A SAE J 514 PVV3.2533.302 771 10 PVV3.2533.303 T 630 18
AGS 2 41 126.4 41 113.9 45.4 1"5/16-12 UN 2A SAE J 514 PVV3.2533.502 869 10 PVV3.2533.503 T 728 10
AG 5 41 102 41 89.5 18 BSP 1" DIN 3852-2-B PVV3.2525.212 780 10 PVV3.2525.213 T 639 18
41 100 41 87.5 16 BSP 3/4" DIN 3852-2-A PVV3.2519.712 755 10 PVV3.2519.713 T 615 18
41 102 41 89.5 18 BSP 1" DIN 3852-2-A PVV3.2525.712 781 10 PVV3.2525.713 T 641 18
AG 3 41 93 41 80.5 12 18L M26x1.5 ISO 8434-1-L PVV3.2526.302 732 10 PVV3.2526.303 T 591 18
41 95 41 82.5 14 22L M30x2 ISO 8434-1-L PVV3.2530.302 737 10 PVV3.2530.303 T 596 18
41 95 41 82.5 14 28L M36x2 ISO 8434-1-L PVV3.2536.302 742 10 PVV3.2536.303 T 601 18
46 97 46 84.5 16 35L M45x2 ISO 8434-1-L PVV3.2545.302 831 10 PVV3.2545.303 T 690 18
41 97 41 84.5 16 20S M30x2 ISO 8434-1-S PVV3.2530.402 748 10 PVV3.2530.403 T 607 18
41 99 41 86.5 18 25S M36x2 ISO 8434-1-S PVV3.2536.402 771 10 PVV3.2536.403 T 630 18
46 101 46 88.5 20 30S M42x2 ISO 8434-1-S PVV3.2542.402 852 10 PVV3.2542.403 T 711 18
55 103 55 90.5 22 38S M52x2 ISO 8434-1-S PVV3.2552.402 1039 10 PVV3.2552.403 T 898 18
AGS 3 41 115 41 102.5 34 18L M26x1.5 ISO 8434-1-L PVV3.2526.502 820 10 PVV3.2526.503 T 679 10
41 115 41 102.5 34 22L M30x2 ISO 8434-1-L PVV3.2530.502 846 10 PVV3.2530.503 T 705 10
41 115 41 102.5 34 28L M36x2 ISO 8434-1-L PVV3.2536.502 883 10 PVV3.2536.503 T 742 10
46 121 46 108.5 40 35L M45x2 ISO 8434-1-L PVV3.2545.502 1098 10 PVV3.2545.503 T 957 10
41 117 41 104.5 36 20S M30x2 ISO 8434-1-S PVV3.2530.602 863 10 PVV3.2530.603 T 722 10
41 119 41 106.5 38 25S M36x2 ISO 8434-1-S PVV3.2536.602 924 10 PVV3.2536.603 T 783 10
46 121 46 108.5 40 30S M42x2 ISO 8434-1-S PVV3.2542.602 1034 10 PVV3.2542.603 T 893 10
55 134 55 121.5 53 38S M52x2 ISO 8434-1-S PVV3.2552.602 1430 10 PVV3.2552.603 T 1289 10
THREADS
AGS 2 AGS 3

PVV3
PVV3 DN25 - BG 5 - ISO 25 (E)
(g) (pcs.) (g) (pcs.)
IG 1 41 100 41 87.5 BSP 3/4" DIN 3852-2-X PVV3.2519.112 837 10 PVV3.2519.113 E 760 18
41 100 41 87.5 NPT 3/4" ANSI B1.20.3 PVV3.2519.012 844 10 PVV3.2519.013 E 767 18
41 100 41 87.5 RC 3/4" UNI ISO 7/1 PVV3.2519.042 844 10 PVV3.2519.043 E 766 18
41 100 41 87.5 BSP 1" DIN 3852-2-X PVV3.2525.112 782 10 PVV3.2525.113 E 705 18
41 100 41 87.5 NPT 1" ANSI B1.20.3 PVV3.2525.012 795 10 PVV3.2525.013 E 717 18
41 100 41 87.5 M30x1.5 ISO 6149-1 PVV3.2530.102 810 10 PVV3.2530.103 E 732 18
IG 2 41 100 41 87.5 1"1/16-12 UN 2B SAE J 1926-1 PVV3.2527.032 831 10 PVV3.2527.033 E 753 18
41 100 41 87.5 1"5/16-12 UN 2B SAE J 1926-1 PVV3.2533.032 772 10 PVV3.2533.033 E 695 18
AG 2 41 104.1 41 91.6 23.1 1"5/16-12 UN 2A SAE J 514 PVV3.2533.302 771 10 PVV3.2533.303 E 694 18
AGS 2 41 126.4 41 113.9 45.4 1"5/16-12 UN 2A SAE J 514 PVV3.2533.502 869 10 PVV3.2533.503 E 791 10
AG 5 41 102 41 89.5 18 BSP 1" DIN 3852-2-B PVV3.2525.212 780 10 PVV3.2525.213 E 702 18
41 100 41 87.5 16 BSP 3/4" DIN 3852-2-A PVV3.2519.712 755 10 PVV3.2519.713 E 678 18
41 102 41 89.5 18 BSP 1" DIN 3852-2-A PVV3.2525.712 781 10 PVV3.2525.713 E 704 18
AG 3 41 93 41 80.5 12 18L M26x1.5 ISO 8434-1-L PVV3.2526.302 732 10 PVV3.2526.303 E 655 18
41 95 41 82.5 14 22L M30x2 ISO 8434-1-L PVV3.2530.302 737 10 PVV3.2530.303 E 660 18
41 95 41 82.5 14 28L M36x2 ISO 8434-1-L PVV3.2536.302 742 10 PVV3.2536.303 E 665 18
46 97 46 84.5 16 35L M45x2 ISO 8434-1-L PVV3.2545.302 831 10 PVV3.2545.303 E 753 18
41 97 41 84.5 16 20S M30x2 ISO 8434-1-S PVV3.2530.402 748 10 PVV3.2530.403 E 671 18
41 99 41 86.5 18 25S M36x2 ISO 8434-1-S PVV3.2536.402 771 10 PVV3.2536.403 E 693 18
46 101 46 88.5 20 30S M42x2 ISO 8434-1-S PVV3.2542.402 852 10 PVV3.2542.403 E 774 18
55 103 55 90.5 22 38S M52x2 ISO 8434-1-S PVV3.2552.402 1039 10 PVV3.2552.403 E 962 18
AGS 3 41 115 41 102.5 34 18L M26x1.5 ISO 8434-1-L PVV3.2526.502 820 10 PVV3.2526.503 E 743 10
41 115 41 102.5 34 22L M30x2 ISO 8434-1-L PVV3.2530.502 846 10 PVV3.2530.503 E 768 10
41 115 41 102.5 34 28L M36x2 ISO 8434-1-L PVV3.2536.502 883 10 PVV3.2536.503 E 806 10
46 121 46 108.5 40 35L M45x2 ISO 8434-1-L PVV3.2545.502 1098 10 PVV3.2545.503 E 1020 10
41 117 41 104.5 36 20S M30x2 ISO 8434-1-S PVV3.2530.602 863 10 PVV3.2530.603 E 785 10
41 119 41 106.5 38 25S M36x2 ISO 8434-1-S PVV3.2536.602 924 10 PVV3.2536.603 E 847 10
46 121 46 108.5 40 30S M42x2 ISO 8434-1-S PVV3.2542.602 1034 10 PVV3.2542.603 E 956 10
55 134 55 121.5 53 38S M52x2 ISO 8434-1-S PVV3.2552.602 1430 10 PVV3.2552.603 E 1353 10
THREADS
AGS 2 AGS 3

PVV3
PVV3 DN30 - BG 6 - ISO 31.5 (T)
(g) (pcs.) (g) (pcs.)
IG 1 119.2 114.5 BSP 1"¼ DIN 3852-2-X PVV3.3031.112 1876 5 PVV3.3031.113 T 2264 5
119.2 114.5 NPT 1"¼ ANSI B1.20.3 PVV3.3031.012 1894 5 PVV3.3031.013 T 2282 5
120.7 116 BSP 1"½ DIN 3852-2-X PVV3.3039.112 1804 5 PVV3.3039.113 T 2192 5
120.7 116 NPT 1"½ ANSI B1.20.3 PVV3.3039.012 1821 5 PVV3.3039.013 T 2209 5
AG 3 117.7 113 16 35L M45x2 ISO 8434-1-L PVV3.3045.302 1797 5 PVV3.3045.303 T 2185 5
117.7 113 16 42L M52x2 ISO 8434-1-L PVV3.3052.302 1815 5 PVV3.3052.303 T 2203 5
121.7 117 20 30S M42x2 ISO 8434-1-S PVV3.3042.402 1823 5 PVV3.3042.403 T 2211 5
123.7 119 22 38S M52x2 ISO 8434-1-S PVV3.3052.402 1844 5 PVV3.3052.403 T 2232 5
AGS 3 141.7 137 40 35L M45x2 ISO 8434-1-L PVV3.3045.502 2025 5 PVV3.3045.503 T 2413 5
148.7 144 47 42L M52x2 ISO 8434-1-L PVV3.3052.502 2255 5 PVV3.3052.503 T 2643 5
141.7 137 40 30S M42x2 ISO 8434-1-S PVV3.3042.602 2007 5 PVV3.3042.603 T 2395 5
154.7 150 53 38S M52x2 ISO 8434-1-S PVV3.3052.602 2232 5 PVV3.3052.603 T 2620 5
PVV3 DN30 - BG 6 - ISO 31.5 (E)
(g) (pcs.) (g) (pcs.)
IG 1 119.2 114.5 BSP 1"¼ DIN 3852-2-X PVV3.3031.112 1876 5 PVV3.3031.113 2132 5
119.2 114.5 NPT 1"¼ ANSI B1.20.3 PVV3.3031.012 1894 5 PVV3.3031.013 2150 5
120.7 116 BSP 1"½ DIN 3852-2-X PVV3.3039.112 1804 5 PVV3.3039.113 2060 5
120.7 116 NPT 1"½ ANSI B1.20.3 PVV3.3039.012 1821 5 PVV3.3039.013 2077 5
AG 3 117.7 113 16 35L M45x2 ISO 8434-1-L PVV3.3045.302 1797 5 PVV3.3045.303 2053 5
117.7 113 16 42L M52x2 ISO 8434-1-L PVV3.3052.302 1815 5 PVV3.3052.303 2071 5
121.7 117 20 30S M42x2 ISO 8434-1-S PVV3.3042.402 1823 5 PVV3.3042.403 2079 5
123.7 119 22 38S M52x2 ISO 8434-1-S PVV3.3052.402 1844 5 PVV3.3052.403 2100 5
AGS 3 141.7 137 40 35L M45x2 ISO 8434-1-L PVV3.3045.502 2025 5 PVV3.3045.503 2281 5
148.7 144 47 42L M52x2 ISO 8434-1-L PVV3.3052.502 2255 5 PVV3.3052.503 2511 5
141.7 137 40 30S M42x2 ISO 8434-1-S PVV3.3042.602 2007 5 PVV3.3042.603 2263 5
154.7 150 53 38S M52x2 ISO 8434-1-S PVV3.3052.602 2232 5 PVV3.3052.603 2488 5
THREADS
IG 1 AG 3 AGS 3

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVV3
06 1 6.3 SPVV.06002 29 120 19.5 12 SPVV.06003 29 120 19.5 11 Polypropylene

10 2 10 SPVV.10002 34 180 22.5 10 SPVV.10003 34 180 22.5 9 Polypropylene
13 3 12.5 SPVV.13002 42 135 29.5 15 SPVV.13003 41.5 135 29.5 13 Polypropylene
25 5 25 SPVV.25002 54 190 41 23 SPVV.25003 55 190 41 20 Polypropylene
30 6 31.5 SPVV.30002 75 240 55 52 SPVV.30003 77 240 55 56 Polypropylene
06 1 6.3 SPVV.06202 30 205 27 39 SPVV.06203 34 205 27 51 Aluminum

10 2 10 SPVV.10202 34 205 27 40 SPVV.10203 34 205 27 51 Aluminum
25 5 25 SPVV3.25202 55 275 47.5 75 SPVV3.25203 55 275 47.5 111 Aluminum
30 6 31.5 SPVV.30202 78 275 47.5 188 SPVV.30203 78 275 47.5 219 Aluminum

DNP BG ISO OR-I (NBR*) BK (PTFE) OR-E (NBR*)
06 1 6.3 PVV.006.120 PAV.006.130 PVV.006.121

10 2 10 PVV.010.120 PVV.010.130 PVV.013.120
13 3 12.5 PVV.013.120 PVV.013.130 PVV.013.121
20 4 20 PDV.019.120 PVV.019.130 PVV.019.121
25 5 25 PAV.025.120 PVV.025.130 PVV.025.121
30 6 31.5 PVV.030.120 PVV.030.130 PAV.050.120


PVV3 CS
SCREW/ISO 14541
INNESTI A VITE/SICURA
SCREW COUPLINGS/PIN LOCK
SCHRAUBKUPPLUNGEN/SPLINT
COUPLEURS A VISSER/GOUPILLE
• Norma: ISO 14541 (solo DN13)

Min burst pressure

Technical data E
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
• Standard: ISO 14541 (DN13 only)
Male
flow
Max
Nominal size
• Locking: screw
• Material: steel 13 3 12.5 10.5 40 45 90 120 150 140 2.7
• Finishing: Zn-Fe (Cr III) 25 5 25 17.3 30 189 280 100 130 140 16
• Threads: BSP - NPT - SAE - METRICS 30 6 31.5 29.6 30 288 480 100 100 100 30
• Norm: ISO 14541 (nur DN13)

• Kuppeln unter Druck: erlaubt (Steckerseite
oder Muffeseite)
• Norme: ISO 14541 (seulement DN13)


PVV3 CS
PVV3 CS DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 30 67 30 64.5 BSP 3/8" DIN 3852-2-X PVV3.1310.112 CS 316 40 PVV3.1310.113 CS 293 30
30 69.5 30 67 NPT 3/8" ANSI B1.20.3 PVV3.1310.012 CS 342 40 PVV3.1310.013 CS 319 30
30 69.5 30 65 RC 3/8" UNI ISO 7/1 PVV3.1310.042 CS 337 40 PVV3.1310.043 CS 314 30
30 67 30 64.5 BSP 1/2" DIN 3852-2-X PVV3.1313.112 CS 312 40 PVV3.1313.113 CS 289 30
30 70 30 67.5 NPT 1/2" ANSI B1.20.3 PVV3.1313.012 CS 326 40 PVV3.1313.013 CS 303 30
30 71.5 30 69 RC 1/2" UNI ISO 7/1 PVV3.1313.042 CS 333 40 PVV3.1313.043 CS 310 30
36 72.5 36 70 BSP 3/4" DIN 3852-2-X PVV3.1319.112 CS 365 40 PVV3.1319.113 CS 342 30
36 72.5 36 70 NPT 3/4" ANSI B1.20.3 PVV3.1319.012 CS 374 40 PVV3.1319.013 CS 351 30
30 67 30 64.5 M14x1.5 ISO 6149-1 PVV3.1314.102 CS 325 40 PVV3.1314.103 CS 302 30
IG 2 30 67 30 64.5 9/16"-18 UNF 2B SAE J 1926-1 PVV3.1315.032 CS 323 40 PVV3.1315.033 CS 300 30
30 67 30 64.5 3/4"-16 UNF 2B SAE J 1926-1 PVV3.1319.032 CS 318 40 PVV3.1319.033 CS 295 30
30 71 30 68.5 7/8"-14 UNF 2B SAE J 1926-1 PVV3.1323.032 CS 317 40 PVV3.1323.033 CS 294 30
30 69 30 66.5 M16x1.5 SAE J 2244/1 PVV3.1316.112 CS 333 40 PVV3.1316.113 CS 310 30
30 67 30 64.5 M22x1.5 SAE J 2244/1 PVV3.1322.102 CS 320 40 PVV3.1322.103 CS 297 30
AG 1 27 67.1 27 64.6 11.1 3/4"-16 UNF 2A SAE J 1926-3 PVV5.1319.332 CS 283 40 PVV5.1319.333 CS 260 30
30 70 30 67.5 16 M20x1.5 ISO 6149-2 PVV3.1320.222 CS 303 40 PVV3.1320.223 CS 280 30
AG 2 30 68.1 30 65.6 14.1 9/16"-18 UNF 2A SAE J 514 PVV3.1315.302 CS 284 40 PVV3.1315.303 CS 261 30
30 70.7 30 68.2 16.7 3/4"-16 UNF 2A SAE J 514 PVV3.1319.302 CS 293 40 PVV3.1319.303 CS 270 30
AGS 2 30 91.6 30 89.1 37.6 3/4"-16 UNF 2A SAE J 514 PVV3.1319.502 CS 320 40 PVV3.1319.503 CS 297 30
30 95.1 30 92.6 41.1 7/8"-14 UNF 2A SAE J 514 PVV3.1323.502 CS 336 40 PVV3.1323.503 CS 313 30
AG 5 30 68.5 30 66 12 BSP 3/8" DIN 3852-2-B PVV3.1310.212 CS 294 40 PVV3.1310.213 CS 271 30
30 71 30 68.5 13 BSP 1/2" DIN 3852-2-B PVV3.1313.212 CS 302 40 PVV3.1313.213CS 279 30
30 65 30 62.5 11 M16x1.5 DIN 3863-U PVV3.1316.702 CS 286 40 PVV3.1316.703 CS 263 30
THREADS

PVV3 CS
(g) (pcs.) (g) (pcs.)
AG 3 30 64 30 61.5 10 08L M14x1.5 ISO 8434-1-L PVV3.1314.302 CS 284 40 PVV3.1314.303 CS 261 30
30 65 30 62.5 11 10L M16x1.5 ISO 8434-1-L PVV3.1316.302 CS 285 40 PVV3.1316.303 CS 262 30
30 66 30 63.5 12 10S M18x1.5 ISO 8434-1-S PVV3.1318.402 CS 291 40 PVV3.1318.403 CS 268 30
30 71 30 68.5 16 20S M30x2 ISO 8434-1-S PVV3.1330.402 CS 315 40 PVV3.1330.403 CS 292 30
AGS 3 30 80 30 77.5 26 08L M14x1.5 ISO 8434-1-L PVV3.1314.502 CS 297 40 PVV3.1314.503 CS 274 30
THREADS
AG 3 AGS 3

PVV3 CS
PVV3 CS DN25 - BG 5 - ISO 25
(g) (pcs.) (g) (pcs.)
IG 1 41 100 41 87.5 BSP 3/4" DIN 3852-2-X PVV3.2519.112 CS 837 10 PVV3.2519.113 CS 760 18
41 100 41 87.5 NPT 3/4" ANSI B1.20.3 PVV3.2519.012 CS 844 10 PVV3.2519.013 CS 767 18
41 100 41 87.5 RC 3/4" UNI ISO 7/1 PVV3.2519.042 CS 844 10 PVV3.2519.043 CS 766 18
41 100 41 87.5 BSP 1" DIN 3852-2-X PVV3.2525.112 CS 782 10 PVV3.2525.113 CS 705 18
41 100 41 87.5 NPT 1" ANSI B1.20.3 PVV3.2525.012 CS 795 10 PVV3.2525.013 CS 717 18
IG 2 41 100 41 87.5 1"1/16-12 UN 2B SAE J 1926-1 PVV3.2527.032 CS 831 10 PVV3.2527.033 CS 753 18
41 100 41 87.5 1"5/16-12 UN 2B SAE J 1926-1 PVV3.2533.032 CS 772 10 PVV3.2533.033 CS 695 18
AG 2 41 104.1 41 91.6 23.1 1"5/16-12 UN 2B SAE J 514 PVV3.2533.302 CS 771 10 PVV3.2533.303 CS 694 18
AGS 2 41 126.4 41 113.9 45.4 1"5/16-12 UN 2B SAE J 514 PVV3.2533.502 CS 869 10 PVV3.2533.503 CS 791 10
AG 5 41 102 41 89.5 18 BSP 1" DIN 3852-2-B PVV3.2525.212 CS 780 10 PVV3.2525.213 CS 702 18
41 100 41 87.5 16 BSP 3/4" DIN 3852-2-A PVV3.2519.712 CS 755 10 PVV3.2519.713 CS 678 18
41 102 41 89.5 18 BSP 1" DIN 3852-2-A PVV3.2525.712 CS 781 10 PVV3.2525.713 CS 704 18
AG 3 41 93 41 80.5 12 18L M26x1.5 ISO 8434-1-L PVV3.2526.302 CS 732 10 PVV3.2526.303 CS 655 18
41 95 41 82.5 14 22L M30x2 ISO 8434-1-L PVV3.2530.302 CS 737 10 PVV3.2530.303 CS 660 18
AGS 3 41 115 41 102.5 34 18L M26x1.5 ISO 8434-1-L PVV3.2526.502 CS 820 10 PVV3.2526.503 CS 743 10
THREADS
AGS 2 AGS 3

PVV3 CS
(g) (pcs.) (g) (pcs.)
IG 1 119.2 114.5 BSP 1"¼ DIN 3852-2-X PVV3.3031.112 CS 1876 5 PVV3.3031.113 CS 2132 5
119.2 114.5 NPT 1"¼ ANSI B1.20.3 PVV3.3031.012 CS 1894 5 PVV3.3031.013 CS 2150 5
120.7 116 BSP 1"½ DIN 3852-2-X PVV3.3039.112 CS 1804 5 PVV3.3039.113 CS 2060 5
120.7 116 NPT 1"½ ANSI B1.20.3 PVV3.3039.012 CS 1821 5 PVV3.3039.013 CS 2077 5
AG 3 117.7 113 16 35L M45x2 ISO 8434-1-L PVV3.3045.302 CS 1797 5 PVV3.3045.303 CS 2053 5
117.7 113 16 42L M52x2 ISO 8434-1-L PVV3.3052.302 CS 1815 5 PVV3.3052.303 CS 2071 5
121.7 117 20 30S M42x2 ISO 8434-1-S PVV3.3042.402 CS 1823 5 PVV3.3042.403 CS 2079 5
AGS 3 141.7 137 40 35L M45x2 ISO 8434-1-L PVV3.3045.502 CS 2025 5 PVV3.3045.503 CS 2281 5
148.7 144 47 42L M52x2 ISO 8434-1-L PVV3.3052.502 CS 2255 5 PVV3.3052.503 CS 2511 5
THREADS
IG 1 AG 3 AGS 3

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVV3 CS


25 5 25 SPVV3.25202 55 275 47.5 75 SPVV3.25203 55 275 47.5 111 Aluminum

13 3 12.5 PVV.013.120 PVV.013.130

25 5 25 PAV.025.120 PVV.025.130
30 6 31.5 PVV.030.120 PVV.030.130


PVVX
SCREW/ISO 14541
INNESTI A VITE/ACCIAIO INOX

SCREW COUPLINGS/STAINLESS STEEL
SCHRAUBKUPPLUNGEN/EDELSTAHL
COUPLEURS A VISSER/ACIER INOX

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size

Technical data E 06 1 6.3 5 30 12 17 120 120 120 0.8
10 2 10 8.5 25 23 30 145 160 240 1.9
• Locking: screw 20 4 20 15.7 15 106 190 70 110 140 9.3
30 6 31.5 29.6 10 288 350 40 40 40 30
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Norm: ISO 14541 (DN06→DN20)



PVVX
PVVX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X PVVX.0606.112 122 100 PVVX.0606.113 130 45
NPT 1/4" ANSI B1.20.3 PVVX.0606.012 123 100 PVVX.0606.013 131 45
PVVX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
67.5 69.5 BSP 3/8" DIN 3852-2-X PVVX.1310.112 322 40 PVVX.1310.113 279 30
67.5 69.5 NPT 3/8" ANSI B1.20.3 PVVX.1310.012 324 40 PVVX.1310.013 281 30
67.5 69.5 BSP 1/2" DIN 3852-2-X PVVX.1313.112 306 40 PVVX.1313.113 263 30
70.5 72.5 NPT 1/2" ANSI B1.20.3 PVVX.1313.012 320 40 PVVX.1313.013 278 30

PVVX

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PVVX.2525.112 716 10 PVVX.2525.113 615 18
NPT 1" ANSI B1.20.3 PVVX.2525.012 726 10 PVVX.2525.013 628 18

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PVVX.3931.112 1802 5 PVVX.3931.113 2350 5
NPT 1"¼ ANSI B1.20.3 PVVX.3931.012 1820 5 PVVX.3931.013 2368 5
BSP 1"½ DIN 3852-2-X PVVX.3939.112 1730 5 PVVX.3939.113 2278 5
NPT 1"½ ANSI B1.20.3 PVVX.3939.012 1747 5 PVVX.3939.013 2295 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVVX
06 1 6.3 SPVV.06002 29 120 19.5 12 SPVV.06003 29 120 19.5 11 Polypropylene

06 1 6.3 SPVV.06202 30 205 27 39 SPVV.06203 34 205 27 51 Aluminum

25 5 25 SPVV.25202 55 275 47.5 75 SPVV.25203 55 275 47.5 111 Aluminum

DNP BG ISO OR-I (FKM) BK (PTFE) OR-E (FKM)
06 1 6.3 PVVX.006.120 V PVVX.006.130 PDV.010.120 V

10 2 10 PVV.010.120V PVV.010.130 PVV.013.120 V
13 3 12.5 PVV.013.120 V PVV.013.130 PVV.013.121 V
20 4 20 PDV.019.120 V PVV.019.130 PVV.019.121 V
25 5 25 PAV.025.120 V PVV.025.130 PVV.025.121 V
30 6 31.5 PAV.039.120 V PVVX.039.130 PVVX.039.121 V

VAV1
SCREW
VITE ALTA PRESSIONE

HIGH PRESSURE SCREW COUPLINGS
HOCHDRUCK-SCHRAUBKUPPLUNGEN
COUPLEURS A VISSER HAUTE PRESSION

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max

• Locking: screw 25 5 25 17.3 37.5 189 200 160 210 150 16

VAV1
VAV1 DN13 - BG 3 - ISO 12.5
(g) (pcs.) (g) (pcs.)
IG 1 BSP 1/2" DIN 3852-2-X VAV1.1313.002 268 60 VAV1.1313.003 235 60
IG 2 M22x1.5 SAE J 2244/1 VAV1.1322.102 262 60 VAV1.1322.103 229 60
VAV1 DN25 - BG 5 - ISO 25
(g) (pcs.) (g) (pcs.)
IG 1 97.8 BSP 1" DIN 3852-2-X VAV1.2525.002 803 20 VAV1.2525.003 872 12
IG 2 95.8 M30x1.5 SAE J 2244/1 VAV1.2530.102 827 20 VAV1.2530.103 896 12
THREADS
IG 1 IG 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VAV1
13 3 12.5 SVAV.13202 40 135 29.5 35 SVAV.13203 40 135 29.5 47 Aluminum with plastic tongue
25 5 25 SVAV.25202 60 275 47.5 80 SVAV.25203 60 275 47.5 194 Aluminum with chain

13 3 12.5 VAV.013.120 VAV.013.130

25 5 25 PBV.025.120 VAV.025.130


VIV1
SCREW/DN30-DN76
VITE/GRANDI DIMENSIONI
SCREW COUPLINGS/BIG DIMENSIONS
SCHRAUBKUPPLUNGEN/GROSSE BG
COUPLEURS A VISSER/GRANDES TAILLES
• Intercambiabilità: disegno Dnp

• Filettature: BSP - NPT - RC
Max working
• Connessione in pressione: non consigliata
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
30 6 31.5 21.1 16 288 480 64 64 64 30

• Interchange: Dnp profile
39 7 40 24.7 14 379 700 56 56 56 54
• Locking: screw 50 8 50 47.2 12 757 1000 50 50 50 120
• Material: steel 63 9 60 58 12 800 1100 40 40 40 135
• Finishing: Zn-Fe (Cr III) and Zn-Ni 76 10 70 71 10 1100 1700 35 35 35 150
• Threads: BSP - NPT - RC 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Connection under pressure: not suggested
• Austauschbarkeit: Dnp Zeichnung

• Gewinde: BSP - NPT - RC
• Kuppeln unter Druck: nicht empfohlen
• Interchangeabilité: projet Dnp

• Taraudage: BSP - NPT - RC
• Connexion sous pression: non conseillée

VIV1
VIV1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X VIV1.3031.002 1026 12 VIV1.3031.003 973 11
NPT 1"¼ ANSI B1.20.3 VIV1.3031.012 1038 12 VIV1.3031.013 979 11
RC 1"¼ UNI ISO 7/1 VIV1.3031.042 1038 12 VIV1.3031.043 1032 11
VIV1 DN39 - BG 7 - ISO 40

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X VIV1.3939.002 1270 11 VIV1.3939.003 1127 8
NPT 1"½ ANSI B1.20.3 VIV1.3939.012 1290 11 VIV1.3939.013 1140 8
RC 1"½ UNI ISO 7/1 VIV1.3939.042 1290 11 VIV1.3939.043 1140 8

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X VIV1.5051.002 3610 4 VIV1.5051.003 3550 3
NPT 2" ANSI B1.20.3 VIV1.5051.012 3640 4 VIV1.5051.013 3570 3

VIV1

(g) (pcs.) (g) (pcs.)
BSP 2"½ DIN 3852-2-X VIV1.6363.002 3460 5 VIV1.6363.003 3220 3
NPT 2"½ ANSI B1.20.3 VIV1.6363.012 3490 5 VIV1.6363.013 3280 3
VIV1 DN76 - BG 10 - ISO 70

(g) (pcs.) (g) (pcs.)
BSP 3" DIN 3852-2-X VIV1.7676.002 4750 2 VIV1.7676.003 5340 2
NPT 3" ANSI B1.20.3 VIV1.7676.012 5310 2 VIV1.7676.013 5900 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VIV1
30 6 31.5 SVIV.30002 69 270 46 111 SVIV.30003 69 210 46 167 Aluminum

39 7 40 SVIV.39002 78 270 46 176 SVIV.39003 78 220 46 210 Aluminum

DNP BG ISO OR (NBR*)
30 6 31.5 VIV.030.120
39 7 40 VIV.039.120
50 8 50 VIV.050.120
63 9 60 VIV.063.120
76 10 70 VIV.076.120


PVE1
SCREW
VITE/MERCATO EUROPEO
SCREW COUPLINGS/EU MARKET
SCHRAUBKUPPLUNGEN/EU MARKT
COUPLEURS A VISSER/MARCHE EUROPEEN
• Intercambiabilità: Faster CVE

• Filettature: BSP
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Interchange: Faster CVE
• Occlusion: poppet DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Locking: screw 20 4 19 16.2 35 120 240 100 100 130 10

• Material: steel 25 5 25 18.6 30 160 320 100 100 100 15
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Threads: BSP
• Austauschbarkeit: Faster CVE

• Gewinde: BSP
• Interchangeabilité: Faster CVE

• Taraudage: BSP

PVE1
PVE1 DN20 - BG 4 - ISO 19

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PVE1.2019.002 704 20 PVE1.2019.003 755 12
STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE

(g) (pcs.) (g) (pcs.)
UNI ISO 228/1 PVE1.2025.212 517 20 PVE1.2025.213 568 12
PVE1 DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PVE1.2525.002 915 18 PVE1.2525.003 874 12

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVE1
20 4 19 SPVE.20202 49.5 270 49 103 SPVE.20203 49 270 41 168 Steel with chain
25 5 25 SPVE.25202 59.5 270 49 132 SPVE.25203 59.5 270 49 217 Steel with chain

20 4 19 PVE.019.120 PVE.019.130
25 5 25 PDV.025.120 (2) -


PVR1
SCREW/RoFLEX
VITE ALTA RESISTENZA

HIGH RESISTANCE SCREW COUPLINGS
SCHRAUBKUPPLUNGEN SCHWERER BAUREIHE
COUPLEURS A VISSER HAUTE RESISTANCE
• Intercambiabilità: innesti RoFLEX

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size

Technical data E
10 2 10 8 61 23 50 260 245 245 2
• Interchange: RoFLEX couplings
13 3 12.5 11.5 47 45 85 165 210 190 3
• Locking: screw 20 4 19 13.5 40 106 120 125 150 125 10
• Material: steel 25 5 25 17.8 35 189 280 110 160 130 16
• Threads: BSP
39 7 40 22.6 30 379 700 95 150 110 54
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Austauschbarkeit: RoFLEX kupplungen

• Gewinde: BSP
• Interchangeabilité: coupleurs RoFLEX

• Taraudage: BSP

PVR1
PVR1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X PVR1.1010.002 318 45 PVR1.1010.003 352 24
BSP 3/8" DIN 3852-2-X PVR1.1010.002 C 371 32 PVR1.1010.003 C 410 20
PVR1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X PVR1.1313.002 484 24 PVR1.1313.003 480 15

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X PVR1.2019.002 660 18 PVR1.2019.003 599 13

PVR1

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X PVR1.2525.002 1179 15 PVR1.2525.003 1147 11
BSP 1" DIN 3852-2-X PVR1.2525.002 C 1257 12 PVR1.2525.003 C 1258 11
PVR1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X PVR1.3031.002 1606 12 PVR1.3031.003 1803 6
BSP 1"¼ DIN 3852-2-X PVR1.3031.002 C 1711 12 PVR1.3031.003 C 1928 6

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X PVR1.3939.002 2006 8 PVR1.3939.003 2184 6
BSP 1"½ DIN 3852-2-X PVR1.3939.002 C 2139 8 PVR1.3939.003 C 2331 5

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVR1
DNP BG ISO COD. F D L (g) COD. M D L (g)
10 2 10 SPVR.10002 48 200 53 SPVR.10003 48 200 58 PVC

13 3 12.5 SPVR.13002 51 200 57 SPVR.13003 51 200 86 PVC
20 4 19 SPVR.20002 57 200 68 SPVR.20003 57 200 81 PVC
25 5 25 SPVR.25002 68 200 78 SPVR.25003 68 200 112 PVC
30 6 31.5 SPVR.30002 76 265 105 SPVR.30003 76 265 125 PVC
39 7 40 SPVR.39002 85 265 133 SPVR.39003 86 265 146 PVC
TOOLS
NOMINAL SIZE SPANNER Dimensions Weight NOMINAL SIZE CLAMPING DEVICE Dimensions Weight
DNP BG ISO COD. (F) D L (g) DNP BG ISO COD. (F) D L (g)
10 2 10 CPVR.10 45.5 185 305 10 2 10 PPVR.10 22.5 81 278
13 3 12.5 CPVR.13 50.5 189 325 13 3 12.5 PPVR.13 26.5 88 432
20 4 19 CPVR.20 55.5 218 420 20 4 19 PPVR.20 30.5 94 486
25 5 25 CPVR.25 70.5 227 740 25 5 25 PPVR.25 40.5 109 926
30 6 31.5 CPVR.30 80.5 238 800 30 6 31.5 PPVR.30 48.5 118 1061
39 7 40 CPVR.39 87.5 251 935 39 7 40 PPVR.39 55.5 125 1416
NOMINAL SIZE ASSEMBLY TOOLS Weight

DNP BG ISO COD. (F) (g)
10 2 10 VPVR.10 466
13 3 12.5 VPVR.13 488
20 4 19 VPVR.20 664
25 5 25 VPVR.25 915
30 6 31.5 VPVR.30 1236
39 7 40 VPVR.39 1573

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVR1
SPARE PARTS NOMINAL SIZE MALE/FEMALE GASKET

DNP BG ISO SS S V SR-1 SR-2 OR (NBR) BK (PTFE)
(Thread Ring) (Spring) (Valve) (Seeger) (Seeger)
10 2 10 PVR.010.020 PVR.010.010 PVR.010.001 PVR.010.176 PVR.010.160 PVV.013.120 PVR.010.130
13 3 12.5 PVR.013.020 PVR.013.010 PVR.013.001 PVR.013.176 PVR.010.176 PVR.013.120 PVR.013.130
20 4 19 PVR.019.020 PVR.019.010 PVR.019.001 PVR.019.176 PVR.013.176 PVR.019.120 PVR.019.130
30 6 31.5 PVR.030.020 PVR.030.010 PVR.030.001 PVR.030.176 PVR.030.160 PVR.030.120 PVR.030.130

VFF1
SCREW/WING NUT
GHIERA A FARFALLA/OTTONE
WING NUT/BRASS
FLÜGELMUTTERHÜLSE/MESSING
ECROU PAPILLON/LAITON
• Materiale: ottone e acciaio
• Finitura acciaio: Zn-Fe (Cr III)
• Filettature: NPT
• Connessione in pressione: non consigliata
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
• Interchange: Parker/Snap-Tite 78
Fluid
Male
flow
Max
Nominal size
• Locking: screw
• Material: brass and steel 20 4 19 11.7 21 106 220 58 46 116 0.15
• Steel finishing: Zn-Fe (Cr III) 25 5 25 15.7 21 190 260 72 37 88 0.40
• Threads: NPT 30 6 31.5 22.7 19 260 400 57 43 52 0.65
39 7 40 26.2 17 380 600 35 43 50 0.85
• Optional seals: FKM, EPDM or more 1 MPa = 145.04 psi • 1 l = 0.264 gal

• Connection under pressure: not suggested
• Werkstoff: Messing und Stahl
• Stahl Ausführung: Zn-Fe (Cr III)
• Gewinde: NPT
• Kuppeln unter Druck: nicht empfohlen
• Matériel: laiton et acier
• Traitement acier: Zn-Fe (Cr III)
• Taraudage: NPT
• Connexion sous pression: non conseillée

VFF1
VFF1 DN20 - BG 4 - ISO 19

(g) (pcs.) (g) (pcs.)
NPT 1/2" ANSI B1.20.3 VFF1.2013.012 430 33 VFF1.2013.013 635 16
NPT 3/4" ANSI B1.20.3 VFF1.2019.012 395 33 VFF1.2019.013 602 16

(g) (pcs.) (g) (pcs.)
NPT 1" ANSI B1.20.3 VFF1.2525.012 633 21 VFF1.2525.013 1040 12

VFF1
VFF1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
NPT 1"¼ ANSI B1.20.3 VFF1.3031.012 765 18 VFF1.3031.013 1255 9

(g) (pcs.) (g) (pcs.)
NPT 1"½ ANSI B1.20.3 VFF1.3939.012 1160 8 VFF1.3939.013 1550 8

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VFF1

20 4 19 SVFF.20402 41 210 30 73 SVFF.20403 40 210 30 107 Brass
25 5 25 SVFF.25402 53 270 41 147 SVFF.25403 48 270 41 185 Brass
30 6 31.5 SVFF.30402 62 280 48 243 SVFF.30403 56 280 48 248 Brass
39 7 40 SVFF.39402 69 280 48 287 SVFF.39403 63 280 48 367 Brass
SPARE PARTS NOMINAL SIZE FEMALE GASKET MALE GASKET

DNP BG ISO OR-E (NBR) OR-I (FKM)
20 4 19 VFF.019.121 PLT.325.030 V
25 5 25 VFF.025.121 VFF.025.120 V
30 6 31.5 VFF.030.121 PTV.025.120 V
39 7 40 VFF.039.121 VFF.039.120 V

VFH1
SCREW/WING NUT
GHIERA A FARFALLA/ACCIAIO
WING NUT/STEEL
FLÜGELMUTTERHÜLSE/STAHL
ECROU PAPILLON/ACIER
• Finitura acciaio: Zn-Fe (Cr III)
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: Parker/Snap-Tite 75
20 4 19 17 35 106 190 75 140 150 8
• Locking: screw 25 5 25 22 35 189 280 90 150 160 16
• Material: steel 30 6 31.5 27 35 288 480 85 160 130 31

• Steel finishing: Zn-Fe (Cr III) 39 7 40 34 35 379 700 60 90 120 64
• Threads: BSP - NPT 50 8 50 47 35 757 1000 50 60 110 141
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Stahl Ausführung: Zn-Fe (Cr III)
• Traitement acier: Zn-Fe (Cr III)

VFH1
VFH1 DN20 - BG 4 - ISO 19

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X VFH1.2019.002 475 28 VFH1.2019.003 835 12
NPT 3/4" ANSI B1.20.3 VFH1.2019.012 480 28 VFH1.2019.013 840 12

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X VFH1.2525.002 1036 15 VFH1.2525.003 1438 8
NPT 1" ANSI B1.20.3 VFH1.2525.012 1046 15 VFH1.2525.013 1447 8
1"5/16-12 UN 2B SAE J 1926-1 VFH1.2533.032 1018 15 VFH1.2533.033 1419 8
VFH1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X VFH1.3031.002 1720 6 VFH1.3031.003 2390 6
NPT 1"¼ ANSI B1.20.3 VFH1.3031.012 1740 6 VFH1.3031.013 2410 6

VFH1

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X VFH1.3939.002 3000 6 VFH1.3939.003 3975 4
NPT 1"½ ANSI B1.20.3 VFH1.3939.012 3020 6 VFH1.3939.013 4000 4

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X VFH1.5051.002 5410 2 VFH1.5051.003 7820 2
NPT 2" ANSI B1.20.3 VFH1.5051.012 5570 2 VFH1.5051.013 7935 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VFH1

20 4 19 SVFH.20202 56 270 45 158 SVFH.20203 50 270 45 140 Aluminum
25 5 25 SVFH.25202 70 270 48 212 SVFH.25203 69.5 270 48 247 Aluminum
30 6 31.5 SVFH.30202 80.5 270 49 314 SVFH.30203 75.5 270 49 389 Aluminum
50 8 50 SVFH.50202 120 380 86 839 SVFH.50203 114 380 86 1026 Aluminum

20 4 19 PPV.325.030 VFH.019.130
25 5 25 PVV.025.121 (2) VFH.025.130 (2)
30 6 31.5 VFH.030.120 VFH.030.130
39 7 40 VFH.039.120 VFH.039.130
50 8 50 VFH.050.120 VFH.050.130

VFH1 BOP
SCREW/WING NUT
GHIERA A FARFALLA/ACCIAIO
WING NUT/STEEL
FLÜGELMUTTERHÜLSE/STAHL
ECROU PAPILLON/ACIER
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
• Interchange: Parker/Snap-Tite 75 Nominal size
• Approval: API 16D DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Occlusion: poppet 25 5 25 22 35 189 280 90 150 160 16
• Locking: screw
39 7 40 34 35 379 700 60 90 120 64
• Material: steel


VFH1 BOP
VFH1 BOP DN25 - BG 5 - ISO 25

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X VFH1.2525.002 BOP 1036 15 VFH1.2525.003 BOP 1438 8
NPT 1" ANSI B1.20.3 VFH1.2525.012 BOP 1046 15 VFH1.2525.013 BOP 1447 8
1"5/16-12 UN 2B SAE J 1926-1 VFH1.2533.032 BOP 1018 15 VFH1.2533.033 BOP 1419 8
VFH1 BOP DN39 - BG 7 - ISO 40

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X VFH1.3939.002 BOP 3000 6 VFH1.3939.003 BOP 3975 4
NPT 1"½ ANSI B1.20.3 VFH1.3939.012 BOP 3020 6 VFH1.3939.013 BOP 4000 4

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VFH1 BOP


PVS
ISO 14540/720 bar
SFERA
BALL
KUGEL
BILLE

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Technical data E
Fluid
Male
flow
Max
Nominal size
• Standard: ISO 14540 DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Occlusion: ball
06 1 6.3 3.7 72 12 12 150 200 220 0.2
• Locking: screw
10 2 10 4.8 72 23 23 150 200 220 0.6
• Material: steel
• Norm: ISO 14540



PVS
PVS DN06 - BG 1 - ISO 6.3
THREADS L2 CH3 L3 L4 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 56 19 39 NPT 1/4" ANSI B1.20.3 PVS3.0606.012 162 100 PVS1.0606.013 87 120
30 39 NPT 3/8" ANSI B1.20.3 PVS1.0610.013 131 100
AG 7 49 19 54 10 NPT 1/8" ANSI B1.20.3 PVS3.0604.022 127 100 PVS1.0604.023 115 120
53 19 58 14 NPT 1/4" ANSI B1.20.3 PVS3.0606.022 134 100 PVS1.0606.023 122 120
19 73.5 14 NPT 1/4" ANSI B1.20.3 PVS3.0606.023 150 72
53 14 NPT 3/8" ANSI B1.20.3 PVS3.0610.022 139 100
AG 5 51.5 10.5 BSP 1/4" JIS B8363 PVS3.0606.212 132 100
PVS DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 40.5 NPT 1/4" ANSI B1.20.3 PVS1.1006.013 165 100
66.5 40.5 BSP 3/8" DIN 3852-2-X PVS3.1010.112 249 70 PVS1.1010.003 144 100
66 40.5 NPT 3/8" ANSI B1.20.3 PVS3.1010.012 250 70 PVS1.1010.013 145 100
40.5 RC 3/8" UNI ISO 7/1 PVS1.1010.043 145 100
AG 7 64.5 14 NPT 1/4" ANSI B1.20.3 PVS3.1006.022 219 70
62 60.5 14 NPT 3/8" ANSI B1.20.3 PVS3.1010.022 221 70 PVS3.1010.023 187 100
62 14 R 3/8" UNI ISO 7/1 PVS3.1010.042 222 70
67.5 19.5 R 1/2" UNI ISO 7/1 PVS3.1013.042 246 70
AG 6 64.5 63 12 BSP 3/8" DIN 3852-11-E PVS3.1010.232 231 70 PVS3.1010.233 200 100
AG 5 62.5 12 BSP 3/8" DIN 3852-2-A PVS3.1010.212 224 70
64.5 63 12 BSP 3/8" DIN 3852-2-B PVS3.1010.222 231 70 PVS3.1010.223 197 100
AG 3 62 12 10S M18x1.5 ISO 8434-1-S PVS3.1018.402 225 70
THREADS
IG 1 AG 3 AG 5 AG 6 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVS

10 2 10 SPVS.10001 37 108 27 16 SPVS.10001 37 108 27 16 Polyetylene

06 1 6.3 SPVS.06100 35 205 27 79 SPVS.06101 35 205 27 78 Steel with chain
06 1 6.3 SPVS.06102 35 205 27 36 SPVS.06103 35 205 27 34 Aluminum with chain
10 2 10 SPVS.10100 C 35 205 27 97 SPVS.10103 C 35 205 27 109 Steel with chain
10 2 10 SPVS.10102 C 35 205 27 49 Aluminum with chain
10 2 10 SPVS.10100 L 35 135 29.5 114 SPVS.10103 L 35 135 29.5 104 Steel with plastic tongue
10 2 10 SPVS.10102 L 35 135 29.5 44 Aluminum with plastic tongue

06 1 6.3 PVS.006.120 PVS.006.130

10 2 10 PDV.010.120 PVS.010.130

PVM
ISO 14540/720 bar
VALVOLA
POPPET
VENTIL
CLAPET

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Locking: screw 06 1 6.3 3.7 72 12 12 270 200 220 0.5
• Material: steel 10 2 10 5 72 23 23 280 340 330 1.7
• Norm: ISO 14540



PVM
PVM DN06 - BG 1 - ISO 6.3
(pcs.)
IG 1 51.3 40.4 BSP 1/4" DIN 3852-2-X PVM3.0606.112 149 100 PVM1.0606.003 90 120
51.3 40.5 NPT 1/4" ANSI B1.20.3 PVM3.0606.012 150 100 PVM1.0606.013 91 120
AG 7 51.8 NPT 1/4" ANSI B1.20.3 PVM3.0606.022 131 100
PVM DN10 - BG 2 - ISO 10
(pcs.)
IG 1 NPT 3/8" ANSI B1.20.3 PVM1.1010.013 138 100
AG 7 NPT 3/8" ANSI B1.20.3 PVM3.1010.022 165 70
THREADS
IG 1 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVM



06 1 6.3 PVS.006.120 PVS.006.130

10 2 10 PDV.010.120 PVS.010.130


PVM4
ISO 14540/720 bar
VALVOLA/ALTA PORTATA
POPPET/HIGH FLOW
VENTIL/HOCHER DURCHFLUSS
CLAPET/HAUT DEBIT

Min burst pressure
Max working
flow rate
pressure
Coupled
spillage
Female
Technical data E
Rated
Fluid
Male
flow
Max
Nominal size
• Locking: screw 06 1 6.3 4 72 12 12 150 200 220 0.2
• Material: steel 10 2 10 5.5 72 23 23 150 200 220 0.6
• Norm: ISO 14540



PVM4
PVM4 DN06 - BG 1 - ISO 6.3
(g) (pcs.) (g) (pcs.)
IG 1 52.5 41 NPT 1/4” ANSI B1.20.3 PVM4.0606.012 171 100 PVM4.0606.013 97 120
AG 7 53 60 NPT 1/4” ANSI B1.20.3 PVM4.0606.022 162 100 PVM4.0606.023 115 66
PVM4 DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 66.5 BSP 3/8” DIN 3852-2-X PVM4.1010.112 249 70 PVM4.1010.003 129 100
66 NPT 3/8” ANSI B1.20.3 PVM4.1010.012 250 70 PVM4.1010.013 139 100
AG 7 62 NPT 3/8” ANSI B1.20.3 PVM4.1010.022 249 70
THREADS
IG 1 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVM4



06 1 6.3 PVS.006.120 PVS.006.130

10 2 10 PDV.010.120 PVS.010.130


PVSX-PVMX
ISO 14540/720 bar
ACCIAIO INOX
STAINLESS STEEL
EDELSTAHL
ACIER INOX

• Occlusione: valvola o sfera
• Filettature: NPT
• Guarnizioni opzionali: NBR, EPDM o altro
Technical data E

Min burst pressure
• Occlusion: poppet or ball
Max working
• Locking: screw
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Threads: NPT
• Working temperature: -25 °C +200 °C PVSX 10 2 10 4.8 72 23 23 140 190 190 0.6
• Optional seals: NBR, EPDM or more PVMX 10 2 10 5 72 23 23 270 210 210 1.7
• Working pressure: 720 bar 1 MPa = 145.04 psi • 1 l = 0.264 gal
• Norm: ISO 14540

• Verschluss: ventil oder kugel
• Gewinde: NPT
• Dichtungen nach Wahl: NBR, EPDM, usw.

• Obturation: clapet ou bille
• Taraudage: NPT
• Joints facultatifs: NBR, EPDM, ect.

PVSX-PVMX
PVSX DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 NPT 3/8” ANSI B1.20.3 PVSX.1010.013 172 100
AG 7 NPT 3/8” ANSI B1.20.3 PVSX.1010.022 230 70
PVMX DN10 - BG 2 - ISO 10
(g) (pcs.) (g) (pcs.)
IG 1 NPT 3/8” ANSI B1.20.3 PVMX.1010.013 154 100
AG 7 NPT 3/8” ANSI B1.20.3 PVMX.1010.022 171 70
THREADS
IG 1 AG 7

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PVSX-PVMX


10 2 10 SPVS.10302 C 35 205 27 97 SPVS.10303 C 35 205 27 109 Stainless steel with chain

10 2 10 PDV.010.120 V PVS.010.130

PCJ5
1000 bar/115
ALTISSIMA PRESSIONE
UHP COUPLINGS
HÖCHSTDRUCK
ULTRA HAUTE PRESSION
• Compatibilità: Cejn 115

• Fattore di sicurezza: 1:2.5
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Compatibility: Cejn 115
06 1 6.3 2.5 100 6 6 250 250 250 0.008
• Safety factor: 1:2.5
• Kompatibilität: Cejn 115

• Kupplung: Radialkugeln
• Werkstoff: hochwertiger Stahl
• Sicherheitsfaktor: 1:2.5
• Compatibilité: Cejn 115

• Facteur de sécurité: 1:2.5

PCJ5
PCJ5 DN06 - BG 1 - ISO 6.3
THREADS L2 CH3 L3 L4 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 54.3 22 38.1 BSP 1/8" DIN 3852-2-X PCJ5.0604.002 176 100 PCJ5.0604.003 78 150
61.3 22 38.1 BSP 1/4" DIN 3852-2-X PCJ5.0606.002 195 100 PCJ5.0606.003 71 150
58.3 22 35.7 NPT 1/4" ANSI B1.20.1 PCJ5.0606.012 186 100 PCJ5.0606.013 67 150
63.3 24 39.6 BSP 3/8" DIN 3852-2-X PCJ5.0610.002 193 100 PCJ5.0610.003 84 150
60.3 24 39.6 NPT 3/8" ANSI B1.20.1 PCJ5.0610.012 185 100 PCJ5.0610.013 78 150
AG 7 62.3 22 63.2 14 NPT 1/4" ANSI B1.20.1 PCJ5.0606.022 172 100 PCJ5.0606.023 122 100
AG 5 61.3 22 48.8 12 BSP 1/4" DIN 3852-2-A PCJ5.0606.212 171 100 PCJ5.0606.213 90 150
61.3 22 61.1 12 BSP 3/8" DIN 3852-2-A PCJ5.0610.212 174 100 PCJ5.0610.213 126 100
THREADS
IG 1 AG 5 AG 7

06 1 6.3 SPCJ.06002 29 110 22 7 SPCJ.06003 22 110 20 9 PVC

PCJ6
1500 bar/116
ALTISSIMA PRESSIONE
UHP COUPLINGS
HÖCHSTDRUCK
ULTRA HAUTE PRESSION
• Compatibilità: Cejn 116

• Finitura: Zn-Ni
• Fattore di sicurezza: 1:2.5
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Compatibility: Cejn 116
• Occlusion: poppet DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Finishing: Zn-Ni
• Safety factor: 1:2.5
• Kompatibilität: Cejn 116

• Werkstoff: hochwertiger Stahl
• Sicherheitsfaktor: 1:2.5
• Compatibilité: Cejn 116

• Joints standard: composé spécial
• Facteur de sécurité: 1:2.5

PCJ6
PCJ6 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
61.3 38.1 BSP 1/4" DIN 3852-2-X PCJ6.0606.002 196 100 PCJ6.0606.003 71 150
58.3 35.7 NPT 1/4" ANSI B1.20.1 PCJ6.0606.012 186 100 PCJ6.0606.013 66 150

06 1 6.3 SPCJ.06042 29 110 22 7 SPCJ.06043 22 110 20 9 PVC

VDV1
SCREW/VV
VITE/STANDARD
SCREW COUPLINGS/STANDARD
SCHRAUBKUPPLUNGEN/STANDARD
COUPLEURS A VISSER/STANDARD
• Intercambiabilità: Faster VV
• Aggancio: a vite e sfere radiali
Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E
• Interchange: VV Faster 06 1 6.3 6.5 35 12 24 180 140 150 1
10 2 10 9.8 30 23 46 120 180 180 2
• Locking: screw and radial balls
13 3 12.5 10.5 30 45 90 100 160 160 3
• Material: steel
• Finishing: Zn-Fe (Cr III) 20 4 19 13.7 25 106 220 100 100 130 10
• Threads: BSP - NPT 25 5 25 15.6 23 189 260 60 90 70 15
• Austauschbarkeit: VV Faster
• Kupplung: Schraubweise und Radial Kugeln
• Interchangeabilité: VV Faster
• Accrochage: a vissé et billes radiales

VDV1
VDV1 DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
33 BSP 1/4" DIN 3852-2-X VDV1.0606.002 122 70 VDV1.0606.003 49 150
38 BSP 1/4" DIN 3852-2-X PDV1.0606.003 80 200
33 NPT 1/4" ANSI B1.20.3 VDV1.0606.012 123 70 VDV1.0606.013 50 150
38 NPT 1/4" B1.20.3 PDV1.0606.013 81 200
VDV1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X VDV1.1010.002 235 48 VDV1.1010.003 95 54
BSP 3/8" DIN 3852-2-X PDV1.1010.003 80 200
NPT 3/8" ANSI B1.20.3 VDV1.1010.012 236 48 VDV1.1010.013 96 54
NPT 3/8" ANSI B1.20.3 PDV1.1010.013 81 200

VDV1
VDV1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
49 BSP 1/2" DIN 3852-2-X VDV1.1313.002 313 35 VDV1.1313.003 134 45
48 BSP 1/2" DIN 3852-2-X PAV1.1313.003 97 200
49 NPT 1/2" ANSI B1.20.3 VDV1.1313.012 316 35 VDV1.1313.013 137 45
48 NPT 1/2" ANSI B1.20.3 PAV1.1313.013 98 200

(g) (pcs.) (g) (pcs.)
62 BSP 3/4" DIN 3852-2-X VDV1.2019.002 688 20 VDV1.2019.003 263 30
57 BSP 3/4" DIN 3852-2-X PDV1.2019.003 183 45
62 NPT 3/4" ANSI B1.20.3 VDV1.2019.012 693 20 VDV1.2019.013 268 30
57 NPT 3/4" ANSI B1.20.3 PDV1.2019.013 188 45

VDV1

(g) (pcs.) (g) (pcs.)
73 BSP 1" DIN 3852-2-X VDV1.2525.002 956 18 VDV1.2525.003 410 20
65.5 BSP 1" DIN 3852-2-X PDV1.2525.003 282 30
73 NPT 1" ANSI B1.20.3 VDV1.2525.012 963 18 VDV1.2525.013 417 20
65.5 NPT 1" ANSI B1.20.3 PDV1.2525.013 289 30

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VDV1
METAL CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST MATERIAL

06 1 6.3 SVVV.06202 28 190 27 39 SVVV.06203 30 190 27 50 Aluminum
10 2 10 SVVV.10202 34 240 30 71 SVVV.10203 34 240 30 58 Aluminum

06 1 6.3 PDV.006.120 PDV.006.130

10 2 10 PDV.010.120 PDV.010.130
13 3 12.5 PAV.013.120 PAV.013.130
20 4 19 PDV.019.120 PVV.019.130
25 5 25 PDV.025.120 PDV.025.130


VVV1
SCREW/VVS
VITE ALTA PRESSIONE/ACCIAIO

HIGH PRESSURE SCREW COUPLINGS/STEEL
HOCHDRUCKSCHRAUBKUPPLUNGEN/STAHL
COUPLEURS A VISSER HAUTE PRESSION/ACIER
• Intercambiabilità: Faster VVS

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size

Technical data E
10 2 10 6.2 65 18 18 300 300 300 1.9
• Interchange: VVS Faster
13 3 12.5 9 60 23 23 250 270 220 2.7
• Locking: screw 20 4 19 11 50 45 45 240 260 210 9.3
• Material: steel 25 5 25 13.3 46 106 106 230 260 200 16

• Threads: BSP - NPT 39 7 40 24.6 36 300 300 120 150 150 54
50 8 50 30 21 757 757 130 130 105 120
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Austauschbarkeit: VVS Faster

• Interchangeabilité: VVS Faster


VVV1
VVV1 DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)
BSP 3/8" DIN 3852-2-X VVV1.1010.002 344 24 VVV1.1010.003 155 42
NPT 3/8" ANSI B1.20.3 VVV1.1010.012 346 24 VVV1.1010.013 157 42
VVV1 DN13 - BG 3 - ISO 12.5

(g) (pcs.) (g) (pcs.)
BSP 1/2" DIN 3852-2-X VVV1.1313.002 576 20 VVV1.1313.003 177 35
NPT 1/2" ANSI B1.20.3 VVV1.1313.012 582 20 VVV1.1313.013 180 35

(g) (pcs.) (g) (pcs.)
BSP 3/4" DIN 3852-2-X VVV1.2019.002 988 20 VVV1.2019.003 364 24
NPT 3/4" ANSI B1.20.3 VVV1.2019.012 997 20 VVV1.2019.013 373 24

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X VVV1.2525.002 1403 15 VVV1.2525.003 538 18
NPT 1" ANSI B1.20.3 VVV1.2525.012 1481 15 VVV1.2525.013 540 18

VVV1
VVV1 DN30 - BG 6 - ISO 31.5

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X VVV1.3031.002 2870 8 VVV1.3031.003 1050 6
NPT 1"¼ ANSI B1.20.3 VVV1.3031.012 2950 8 VVV1.3031.013 1092 6

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X VVV1.3939.002 4440 3 VVV1.3939.003 1700 8
NPT 1"½ ANSI B1.20.3 VVV1.3939.012 4470 3 VVV1.3939.013 1720 8

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X VVV1.5051.002 8730 2 VVV1.5051.003 4940 2
NPT 2" ANSI B1.20.3 VVV1.5051.012 8920 2 VVV1.5051.013 5070 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VVV1
METAL CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST MATERIAL


10 2 10 PDV.010.120 PBV.010.130
13 3 12.5 PAV.013.120 VVV.013.130
20 4 19 PAV.019.120 VVV.019.130
25 5 25 PDV.025.120 PDV.025.130
30 6 31.5 PBV.039.120 VVV.030.130
39 7 40 VVV.039.120 VVV.039.130
50 8 50 VVV.050.120 VVV.050.130


VVVX
SCREW/VVS
VITE ALTA PRESSIONE/ACCIAIO INOX

HIGH PRESSURE SCREW COUPLINGS/STAINLESS STEEL
HOCHDRUCKSCHRAUBKUPPLUNGEN/EDELSTAHL
COUPLEURS A VISSER HAUTE PRESSION/ACIER INOX
• Intercambiabilità: Faster VVS

Max working
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
Technical data E 06 1 6.3 4 90 6 6 370 380 370 0.5
• Interchange: VVS Faster 10 2 10 6.2 65 18 18 230 200 260 1.9
• Occlusion: poppet 13 3 12.5 9 60 23 23 210 270 250 2.7

• Locking: screw 20 4 19 11 50 45 45 210 170 240 9.3
30 6 31.5 22.2 36 189 189 100 100 100 30
• Working temperature: -25 °C +200 °C 39 7 40 24.6 36 300 300 90 90 90 54
• Optional seals: FFKM, EPDM or more 50 8 50 30 21 757 757 50 50 50 120
• Austauschbarkeit: VVS Faster

• Interchangeabilité: VVS Faster


VVVX
VVVX DN06 - BG 1 - ISO 6.3

(g) (pcs.) (g) (pcs.)
BSP 1/4" DIN 3852-2-X VVVX.0606.002 197 30 VVVX.0606.003 88 60
NPT 1/4" ANSI B1.20.3 VVVX.0606.012 198 30 VVVX.0606.013 89 60
VVVX DN10 - BG 2 - ISO 10

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)

(g) (pcs.) (g) (pcs.)

VVVX

(g) (pcs.) (g) (pcs.)
BSP 1" DIN 3852-2-X VVVX.2525.002 1465 15 VVVX.2525.003 524 18
NPT 1" ANSI B1.20.3 VVVX.2525.012 1481 15 VVVX.2525.013 540 18

(g) (pcs.) (g) (pcs.)
BSP 1"¼ DIN 3852-2-X VVVX.3031.002 2933 8 VVVX.3031.003 1074 10
NPT 1"¼ ANSI B1.20.3 VVVX.3031.012 2950 8 VVVX.3031.013 1092 10

(g) (pcs.) (g) (pcs.)
BSP 1"½ DIN 3852-2-X VVVX.3939.002 4550 5 VVVX.3939.003 1734 6
NPT 1"½ ANSI B1.20.3 VVVX.3939.012 4570 5 VVVX.3939.013 1730 6

(g) (pcs.) (g) (pcs.)
BSP 2" DIN 3852-2-X VVVX.5051.002 8880 2 VVVX.5051.003 5030 2
NPT 2" ANSI B1.20.3 VVVX.5051.012 8920 2 VVVX.5051.013 5070 2

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VVVX


06 1 6.3 VVVX.006.120 VVVX.006.130

10 2 10 VVVX.010.120 VVVX.010.130
13 3 12.5 VVVX.013.120 VVVX.013.130
20 4 19 VVVX.019.120 VVVX.019.130
25 5 25 VVVX.025.120 VVVX.025.130
30 6 31.5 VVVX.030.120 VVVX.030.130
39 7 40 VVVX.039.120 VVVX.039.130
50 8 50 VVVX.050.120 VVVX.050.130

PFT
BRAKE VALVE/ISO 5676
VALVOLA FRENI
BRAKE VALVE
BREMSVENTIL
VALVE FREINAGE
• Norma: ISO 5676

• Filettature: BSP - SAE - METRICHE
Min burst pressure
Max working
Technical data E
flow rate
pressure
Coupled
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Material: steel 13 3 12.5 8 15 24 48 90 62 93 0.05
• Threads: BSP - SAE - METRICS
• Norm: ISO 5676

• Gewinde: BSP - SAE - METRISCHE
• Norme: ISO 5676

• Taraudage: BSP - SAE - METRIQUES

PFT
PFT DN13 - BG 3 - ISO 12.5
THREADS CH3 L3 L4 L5 ØT F1 F2 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
COD. F Weight Pack. COD. M Weight Pack.
(g) (pcs.) (g) (pcs.)
IG 1 BSP 3/8" DIN 3852-2-X PFT1.1310.002 398 36
28 57 BSP 1/2" DIN 3852-2-X PFT1.1313.002 389 36 PFT3.1313.113 211 50
M18x1.5 ISO 6149-1 PFT1.1318.102 402 36
AG 5 48 15.5 BSP 1/2" DIN 3852-2-A PFT3.1313.213 153 50
AGS 3 49 21 12L M18x1.5 ISO 8434-1-L PFT3.1318.503 142 50
58 30 12L M18x1.5 ISO 8434-1-L PFT3.1318.523 152 50
51 23 Ø13.4 M20x1.5 - PFT3.1320.503 154 50
41 23 15L M22x1.5 ISO 8434-1-L PFT3.1322.503 172 50
32 82 28 15L M22x1.5 ISO 8434-1-L PFT3.1322.623 357 50
63 35 15L M22x1.5 ISO 8434-1-L PFT3.1322.603 198 50
AGS 6 52.5 12.5 24.5 Ø10 M16x1.5 M20x1.5 - - PFT3.1336.503 152 50
52 12.5 24 Ø12 M18x1.5 M20x1.5 - - PFT3.1338.503 152 50
AG 1 28 50 11 3/4"-16 UNF 2A SAE J 1926-2 PFT3.1319.223 131 50
AG 3 32 65 12 12L M18x1.5 ISO 8434-1-L PFT3.1318.303 287 50
32 65 12 15L M22x1.5 ISO 8434-1-L PFT3.1322.303 293 50
AGS 1 65 37 M22x1.5 DIN 3863-U PFT3.1322.613 205 50
AGS 2 28 89.5 16.7 3/4"-16 UNF 2A SAE J 514 PFT3.1319.503 192 50
32 94 40 7/8"-14 UNF 2A SAE J 514 PFT3.1378.603 365 50
PFTB DN13 - BG 3 - ISO 12.5
THREADS F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE

COD. F Weight Pack.
(g) (pcs.)
IG 1 BSP 3/8" DIN 3852-2-X PFTB.1310.002 373 36
BSP 1/2" DIN 3852-2-X PFTB.1313.002 365 36
IG 1 AG 1 AG 3 AG 5 AGS 1
THREADS
AGS 2 AGS 3 AGS 6

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - PFT
PLASTIC - METAL CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST CAP COLOR MATERIAL
Weight Dimensions Weight
DNP BG ISO COD. F (g) COD. M D L D1 (g)

13 3 12.5 PFT.013.993* 68 - - - - - Steel
13 3 12.5 - - SPFT.13053 37 135 29.5 7 Polyethylene
*NORMALMENTE FORNITO CON LA FEMMINA - SUPPLIED STANDARD WITH THE FEMALE - WIRD MIT DER MUFFE GELIEFERT
FOURNI EN STANDARD AVEC COUPLEUR

VVT
VALVE
VALVOLA VITE
SCREW VALVE
SCHRAUBVENTIL
VALVE VISSE

• Filettature: BSP - SAE - METRICHE
Min burst pressure
Max working
flow rate
pressure
Coupled
Technical data E
spillage
Female
Rated
Fluid
Male
flow
Max
Nominal size
• Occlusion: flat face DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc
• Locking: screw 13 3 12.5 8 20 24 48 100 60 130 0.1

• Threads: BSP - SAE - METRICS
• Gewinde: BSP - SAE - METRISCHE
• Taraudage: BSP - SAE - METRIQUES

VVT
VVT DN13 - BG 3 - ISO 12.5
THREADS CH3 L3 L4 L5 ØT F1 F2 F STANDARD FEMMINA - FEMALE - MUFFE - FEMELLE MASCHIO - MALE - STECKER - MALE
(g) (pcs.) (g) (pcs.)
IG 1 28 57 BSP 1/2" DIN 3852-2-X VVT3.1313.113 255 50
M18x1.5 ISO 6149-1 VVT1.1318.102 387 36
AG 5 48 15.5 BSP 1/2" DIN 3852-2-A VVT3.1313.213 197 50
AGS 3 49 21 12L M18x1.5 ISO 8434-1-L VVT3.1318.503 174 50
58 30 12L M18x1.5 ISO 8434-1-L VVT3.1318.523 196 50
51 23 Ø13.4 M20x1.5 - VVT3.1320.503 183 50
41 23 15L M22x1.5 ISO 8434-1-L VVT3.1322.503 193 50
32 82 28 15L M22x1.5 ISO 8434-1-L VVT3.1322.623 378 50
63 35 15L M22x1.5 ISO 8434-1-L VVT3.1322.603 220 50
AGS 6 52.5 12.5 24.5 Ø10 M16x1.5 M20x1.5 - - VVT3.1336.503 181 50
52 12.5 24 Ø12 M18x1.5 M20x1.5 - - VVT3.1338.503 181 50
AG 1 28 50 11 3/4"-16 UNF 2A SAE J 1926-2 VVT3.1319.223 218 50
32 65 12 12L M18x1.5 ISO 8434-1-L VVT3.1318.303 331 50
AG 3 32 65 12 15L M22x1.5 ISO 8434-1-L VVT3.1322.303 337 50
65 37 M220x1.5 DIN 3863-U VVT3.1322.613 226 50
AGS 1 28 89.5 16.7 3/4"-16 UNF 2A SAE J 514 VVT3.1319.503 236 50
AGS 2 28 89.5 16.7 3/4"-16 UNF 2A SAE J 514 VVT3.1319.503 236 50
32 94 40 7/8"-14 UNF 2A SAE J 514 VVT3.1378.603 409 50
IG 1 AG 1 AG 3 AG 5 AGS 1
THREADS
AGS 2 AGS 3 AGS 6

ACCESSORI / ACCESSORIES / ZUBEHÖR / ACCESSOIRES - VVT
PLASTIC - METAL CAPS NOMINAL SIZE FEMALE DUST PLUG MALE DUST CAP COLOR MATERIAL
Weight Dimensions Weight
DNP BG ISO COD. F (g) COD. M D L D1 (g)

13 3 12.5 VVT.013.993* 70 - - - - - - Steel
13 3 12.5 - - SVVT.13013 44 135 29.5 10 Polyethylene
*NORMALMENTE FORNITO CON LA FEMMINA - SUPPLIED STANDARD WITH THE FEMALE - WIRD MIT DER MUFFE GELIEFERT -
FOURNI EN STANDARD AVEC COUPLEUR

KFX1
IMPUGNATURA
HANDGRIP
HANDGRIFF
POIGNEE
• Pressione di esercizio: 400 bar
Min
Max working
burst
Technical data E
flow rate
pressure
pressure
Rated
flow
Max
Nominal size
• Material: steel
• Finishing: Zn-Fe (Cr III) DNP BG ISO mm MPa l/min l/min MPa
• Threads: BSP - NPT - SAE - METRICS 13 3 12.5 13 40 45 90 169

• Working pressure: 400 bar 1 MPa = 145.04 psi • 1 l = 0.264 gal

KFX1
KFX1 DN13 - BG 3 - ISO 12.5
THREADS F1 THREADS F2 CH L L4 F1 F2 COD. F Weight (g) Packaging

(pcs.)
AG 6 IG 1 25.4 95 14 BSP 1/2" DIN 3852-2-A BSP 1/2" DIN 3852-2-X KFX1.1313.113 334 35
AG 5 IG 1 27 97 14 BSP 1/2" DIN 3852-2-B BSP 1/2" DIN 3852-2-X KFX1.1321.113 342 35
AG 7 IG 1 25.4 102 22 NPT 1/2" ANSI B1.20.3 NPT 1/2" ANSI B1.20.3 KFX1.1313.013 355 35
AG 1 IG 2 25.4 93 11 3/4"-16 UNF 2A SAE J 1926-3 NPT 1/2" 3/4"-16 UNF 2B SAE J 1926-1 355 35
THREADS F1 THREADS F2 CH L L4 L5 ØT F1 F2 COD. F Weight (g) Packaging

(pcs.)
AG 5 AG 3 27 107 14 11 12L BSP 1/2" DIN 3852-2-B M18x1.5 ISO 8434-1-L KFX1.1318.303 432 35
AG 5 AG 3 27 107 14 12 15L BSP 1/2" DIN 3852-2-B M22x1.5 ISO 8434-1-L KFX1.1322.303 425 35
THREADS

GGL-GGN
GIUNTI GIREVOLI
SWIVEL JOINTS
DREHGELENKE
JOINTS TOURNANTS
Caratteristiche tecniche I GGL1- GGN1
• Materiale: acciaio (GGL1-GGN1) o acciaio inox

AISI 316 (GGLX-GGNX)
• Finitura: Zn-Fe (GGL1-GGN1)
• Guarnizioni standard: NBR (GGL1-GGN1)/
FKM (GGLX-GGNX)
• Temperatura d’esercizio: GGLX- GGNX
(GGL1-GGN1) -25 °C +100 °C
(GGLX-GGNX) -25 °C +200 °C
Technical data E
Max working
GGL1 - GGLX
flow rate
pressure
• Material: steel (GGL1-GGN1) or stainless steel
Rated
flow
Max
AISI 316 (GGLX-GGNX) Nominal size
• Finishing: Zn-Fe (GGL1-GGN1) DNP BG ISO mm MPa l/min l/min
• Threads: BSP 06 1 6.3 6.5 35 12 24
• Standard seals: NBR (GGL1-GGN1)/
10 2 10 10 35 23 45
FKM (GGLX-GGNX)
• Working temperature: 13 3 12.5 12 30 45 90
(GGL1-GGN1) -25 °C +100 °C 20 4 20 18 25 106 210

(GGLX-GGNX) -25 °C +200 °C 25 5 25 22 25 189 280
• Optional seals: FKM, EPDM or more 30 6 31.5 30 18 288 379
39 7 40 35 15 379 860
50 8 50 45 15 757 1400
1 MPa = 145.04 psi • 1 l = 0.264 gal
• Werkstoff: Stahl (GGL1-GGN1) oder rostfreiem

Stahl AISI 316 (GGLX-GGNX)
Max working
GGN1 - GGNX
• Ausführung: Zn-Fe (GGL1-GGN1)
flow rate
pressure
Rated
• Gewinde: BSP
flow
Max
Nominal size
• Standard-Dichtungen: NBR (GGL1-GGN1)/
DNP BG ISO mm MPa l/min l/min
FKM (GGLX-GGNX)
• Betriebstemperatur: 06 1 6.3 6.5 35 12 24
(GGL1-GGN1) -25 °C +100 °C 10 2 10 10 30 23 45
(GGLX-GGNX) -25 °C +200 °C 13 3 12.5 12 30 45 90
20 4 20 18 25 106 210
• Drehgeschwindigkeit: 5÷10 rpm 25 5 25 22 25 189 280
30 6 31.5 30 20 288 379
39 7 40 35 15 379 860
50 8 50 45 15 757 1400
• Matériel: acier (GGL1-GGN1) ou acier 1 MPa = 145.04 psi • 1 l = 0.264 gal

inoxydable AISI 316 (GGLX-GGNX)
• Traitement: Zn-Fe (GGL1-GGN1)
• Taraudage: BSP
• Joints standard: NBR (GGL1-GGN1)/
FKM (GGLX-GGNX)
(GGL1-GGN1) -25 °C +100 °C
(GGLX-GGNX) -25 °C +200 °C
• Vitesse de rotation: 5÷10 rpm

GGL-GGN
GGL1 / STEEL / DN06-DN50
NOMINAL SIZE L CH1 CH2 CH3 F STANDARD

COD. F Weight(g)
DNP BG ISO
06 1 6.3 75 27 24 11 BSP 1/4" DIN 3852-2 GGL1.0606.002 218
10 2 10 88 34 30 14 BSP 3/8" DIN 3852-2 GGL1.1010.002 406
13 3 12.5 101 36 32 18 BSP 1/2" DIN 3852-2 GGL1.1313.002 496
20 4 20 110 45 41 24 BSP 3/4" DIN 3852-2 GGL1.2019.002 793
25 5 25 124 55 50 30 BSP 1" DIN 3852-2 GGL1.2525.002 1365
30 6 31.5 129 60 55 38 BSP 1"¼ DIN 3852-2 GGL1.3031.002 1550
39 7 40 138 75 70 41 BSP 1"½ DIN 3852-2 GGL1.3939.002 2590
50 8 50 149 85 75 55 BSP 2" DIN 3852-2 GGL1.5051.002 3480
ALTRE FILETTATURE A RICHIESTA - OTHER THREADS ON REQUEST - ANDERE GEWINDE AUF WUNSCH EBENFALLS LIEFERBAR - AUTRES TARAUDAGES SUR DEMANDE

GGLX / STAINLESS STEEL / DN06-DN50
NOMINAL SIZE L CH1 CH2 CH3 F STANDARD

COD. F Weight(g)
DNP BG ISO
06 1 6.3 75 27 24 11 BSP 1/4" DIN 3852-2 GGLX.0606.002 230
10 2 10 88 34 30 14 BSP 3/8" DIN 3852-2 GGLX.1010.002 400
13 3 12.5 101 36 32 18 BSP 1/2" DIN 3852-2 GGLX.1313.002 500
20 4 20 110 46 41 24 BSP 3/4" DIN 3852-2 GGLX.2019.002 800
25 5 25 124 50 50 30 BSP 1" DIN 3852-2 GGLX.2525.002 1100
30 6 31.5 129 55 55 38 BSP 1"¼ DIN 3852-2 GGLX.3031.002 1400
39 7 40 138 70 70 41 BSP 1"½ DIN 3852-2 GGLX.3939.002 2300
50 8 50 149 80 75 55 BSP 2" DIN 3852-2 GGLX.5051.002 3100


GGL-GGN
GGN1 / STEEL / DN06-DN50
NOMINAL SIZE L X Y CH1 CH2 CH3 F STANDARD

COD. F Weight(g)
DNP BG ISO
06 1 6.3 78 18 65.5 32 24 11 BSP 1/4" DIN 3852-2 GGN1.0606.002 295
10 2 10 98 20.5 83 38 30 14 BSP 3/8" DIN 3852-2 GGN1.1010.002 489
13 3 12.5 108 27 89 46 32 18 BSP 1/2" DIN 3852-2 GGN1.1313.002 701
20 4 20 118 27 99 50 41 24 BSP 3/4" DIN 3852-2 GGN1.2019.002 940
25 5 25 143 32.5 119 60 50 30 BSP 1" DIN 3852-2 GGN1.2525.002 1645
30 6 31.5 156 54 125 60 55 38 BSP 1"¼ DIN 3852-2 GGN1.3031.002 2315
39 7 40 170 50.5 132.5 75 70 41 BSP 1"½ DIN 3852-2 GGN1.3939.002 4140
50 8 50 190 53 142.5 95 80 55 BSP 2" DIN 3852-2 GGN1.5051.002 6810

GGNX / STAINLESS STEEL / DN06-DN50
NOMINAL SIZE L X Y CH1 CH2 CH3 F STANDARD

COD. F Weight(g)
DNP BG ISO
06 1 6.3 78 18 65.5 32 24 11 BSP 1/4" DIN 3852-2 GGNX.0606.002 340
10 2 10 98 20.5 83 38 30 14 BSP 3/8" DIN 3852-2 GGNX.1010.002 520
13 3 12.5 108 27 89 46 32 18 BSP 1/2" DIN 3852-2 GGNX.1313.002 760
20 4 20 118 27 99 50 41 24 BSP 3/4" DIN 3852-2 GGNX.2019.002 1020
25 5 25 143 32.5 119 60 50 30 BSP 1" DIN 3852-2 GGNX.2525.002 1800
30 6 31.5 156 54 125 60 55 38 BSP 1"¼ DIN 3852-2 GGNX.3031.002 2300
39 7 40 170 50.5 132.5 75 70 41 BSP 1"½ DIN 3852-2 GGNX.3939.002 4100
50 8 50 190 53 142.5 95 80 55 BSP 2" DIN 3852-2 GGNX.5051.002 7800


VNR
VALVOLE UNIDIREZIONALI
CHECK VALVES
RÜCKSCHLAGVENTILE
CLAPETS ANTI-RETOUR
• Materiale: acciaio (VNR1) o acciaio inox

AISI 316 (VNRX)
• Finitura: Zn-Fe (VNR1)
• Guarnizioni standard: NBR (VNR1)/FKM (VNRX)
• Temperatura d’esercizio:
(VNR1) -25 °C +100 °C
Max working
(VNRX) -25 °C +200 °C
flow rate
pressure
Rated
flow
Max
Nominal size Cracking Pressure
DNP BG ISO mm MPa l/min l/min MPa
• Taratura standard: 0.5 bar
VNR1 04 0 5 4 35 3 6 0.05 ± 0.01
06 1 6.3 7 35 15 20 0.05 ± 0.01

Technical data E 10 2 10 10 35 30 40 0.05 ± 0.01
• Material: steel (VNR1) or stainless steel 13 3 12.5 11 32 50 90 0.05 ± 0.01
AISI 316 (VNRX) 20 4 20 17 30 90 180 0.05 ± 0.01

• Finishing: Zn-Fe (VNR1) 25 5 25 21 25 150 280 0.05 ± 0.01
30 6 31.5 29 25 200 379 0.05 ± 0.01
• Standard seals: NBR (VNR1)/FKM (VNRX)
39 7 40 34 21 300 860 0.05 ± 0.01
(VNR1) -25 °C +100 °C 50 8 50 40 15 430 1000 0.05 ± 0.01
(VNRX) -25 °C +200 °C VNRX 04 0 5 4 35 3 6 0.05 ± 0.01

• Optional seals: FKM, EPDM or more 06 1 6.3 7 35 12 20 0.05 ± 0.01
• Working pressure: 150-350 bar 10 2 10 10 35 23 40 0.05 ± 0.01
• Cracking point: 0.5 bar
13 3 12.5 11 35 45 90 0.05 ± 0.01
20 4 20 17 30 106 180 0.05 ± 0.01
25 5 25 21 25 189 280 0.05 ± 0.01
30 6 31.5 29 25 379 379 0.05 ± 0.01
• Werkstoff: Stahl (VNR1) oder rostfreiem Stahl 39 7 40 34 25 379 860 0.05 ± 0.01
AISI 316 (VNRX) 50 8 50 40 15 757 1400 0.05 ± 0.01
• Ausführung: Zn-Fe (VNR1)
• Standard-Dichtungen:
NBR (VNR1)/FKM (VNRX)
(VNR1) -25 °C +100 °C
(VNRX) -25 °C +200 °C
• Eichwert: 0.5 bar
• Matériel: acier (VNR1) ou acier inoxydable

AISI 316 (VNRX)
• Traitement: Zn-Fe (VNR1)
• Joints standard: NBR (VNR1)/FKM (VNRX)
(VNR1) -25 °C +100 °C
(VNRX) -25 °C +200 °C
• Tarage: 0.5 bar

VNR
VNR1 / STEEL / DN04-DN50
NOMINAL SIZE CH L F STANDARD

COD. F Weight (g)
DNP BG ISO
04 0 5 14 47 BSP 1/8" DIN 3852-2-X VNR1.04.002 50
04 0 5 14 47 NPT 1/8" DIN 3852-2-X VNR1.04.012 50
06 1 6.3 19 55 BSP 1/4" DIN 3852-2-X VNR1.06.002 93
06 1 6.3 19 58 NPT 1/4" ANSI B1.20.3 VNR1.06.012 100
10 2 10 24 65 BSP 3/8" DIN 3852-2-X VNR1.10.002 171
10 2 10 24 69 NPT 3/8" ANSI B1.20.3 VNR1.10.012 188
13 3 12.5 27 75 BSP 1/2" DIN 3852-2-X VNR1.13.002 225
13 3 12.5 27 75 NPT 1/2" ANSI B1.20.3 VNR1.13.012 231
20 4 20 35 86.5 BSP 3/4" DIN 3852-2-X VNR1.20.002 446
20 4 20 35 88.5 NPT 3/4" ANSI B1.20.3 VNR1.20.012 470
25 5 25 41 110 BSP 1" DIN 3852-2-X VNR1.25.002 731
25 5 25 41 110 NPT 1" ANSI B1.20.3 VNR1.25.012 759
30 6 31.5 55 123 BSP 1"¼ DIN 3852-2-X VNR1.30.002 1496
30 6 31.5 55 120 NPT 1"¼ ANSI B1.20.3 VNR1.30.012 1530
39 7 40 60 138 BSP 1"½ DIN 3852-2-X VNR1.39.002 2400
39 7 40 60 138 NPT 1"½ ANSI B1.20.3 VNR1.39.012 2440
50 8 50 70 160 BSP 2" DIN 3852-2-X VNR1.50.002 3000
50 8 50 75 138 NPT 2" ANSI B1.20.3 VNR1.50.012 3000
VNRX / STAINLESS STEEL / DN04-DN50
NOMINAL SIZE CH L F STANDARD

COD. F Weight (g)
DNP BG ISO
04 0 5 14 42 BSP 1/8" DIN 3852-2-X VNRX.04.002 73
04 0 5 14 42 NPT 1/8" ANSI B1.20.3 VNRX.04.012 74
06 1 6.3 19 50 BSP 1/4" DIN 3852-2-X VNRX.06.002 82
06 1 6.3 19 50 NPT 1/4" ANSI B1.20.3 VNRX.06.012 83
10 2 10 24 60 BSP 3/8" DIN 3852-2-X VNRX.10.002 155
10 2 10 24 60 NPT 3/8" ANSI B1.20.3 VNRX.10.012 159
13 3 12.5 27 65 BSP 1/2" DIN 3852-2-X VNRX.13.002 193
13 3 12.5 27 65 NPT 1/2" ANSI B1.20.3 VNRX.13.012 201
20 4 20 34 75 BSP 3/4" DIN 3852-2-X VNRX.20.002 340
20 4 20 34 75 NPT 3/4" ANSI B1.20.3 VNRX.20.012 350
25 5 25 41 93 BSP 1" DIN 3852-2-X VNRX.25.002 586
25 5 25 41 93 NPT 1" ANSI B1.20.3 VNRX.25.012 604
30 6 31.5 50 110 BSP 1"¼ DIN 3852-2-X VNRX.30.002 960
30 6 31.5 50 110 NPT 1"¼ ANSI B1.20.3 VNRX.30.012 980
39 7 40 55 112 BSP 1"½ DIN 3852-2-X VNRX.39.002 1004
39 7 40 55 112 NPT 1"½ ANSI B1.20.3 VNRX.39.012 1020
50 8 50 75 120 BSP 2" DIN 3852-2-X VNRX.50.002 2020
50 8 50 75 120 NPT 2" ANSI B1.20.3 VNRX.50.012 2160

SPPP-CTR
Caratteristiche tecniche I SPPP
SUPPORTI
• Aggancio:
ANCHOR BRACKETS
(SPPP.13102) sfere radiali
STECKERGEHÄUSE
(SPPP.13182) O-ring
DISPOSITIFS DE FIXATION
Technical data E

• Locking:
DNP BG ISO
(SPPP.13102) radial balls COD. F Weight Packaging
FOR MALES
(SPPP.13182) O-ring PAV / PDS /
(g) (pcs)
• Material: steel PKV / PKS / 13 3 12.5 SPPP.13102 119 168
PKK / PPV
• Finishing: Zn-Fe (Cr III) 13 3 12.5 SPPP.13182 182 70

• Kupplung:
(SPPP.13102) Radialkugeln
(SPPP.13182) O-ring

• Accrochage:
(SPPP.13102) billes radials
(SPPP.13102) O-ring
CTR
CONTRODADI
LOCK NUTS
KONTERMUTTERN
CONTRECROUS
CH L F COD. Weight
Technical data E (g)
• Material: steel
17 6 M12x1.5 1214.017 7
19 6 M14x1.5 1414.019 8
22 6 M16x1.5 1614.022 10
Technische Merkmale D 24 6 M18x1.5 1814.024 12
27 6 M20x1.5 2014.027 15
30 7 M22x1.5 2214.030 22
• Gewinde: BSP - METRISCHE 32 7 M24x1.5 2414.032 23
36 8 M26x1.5 2614.036 36
Caracteristiques techniques F 41 8 M30x2 3014.041 47
• Matériel: acier 46 9 M36x2 3614.046 58

• Traitement: Zn-Fe (Cr III) 50 10 BSP 1" 3114.050 63
• Taraudage: BSP - METRIQUES 50 10 M42x2 4214.050 63
55 10 M45x2 4514.055 81
60 12 M52x2 5214.060 97

I dati tecnici del presente catalogo sono indicativi
e possono essere soggetti a variazone in qualsiasi
momento.
Technical data of this catalogue are indicative and

we reserve the right to change above specifications
without notice.
Technische Angaben, müssen als rein indikativ

betrachtet werden, Änderungen behalten wir uns
ohne Anküdigung vor.
Les informations techniques conténues dans ce

catalogue sont données à titre indicatif, nous nous
réservons le droit de les modifier sans préavis.
CAT. 13 del 03/2019
DNP Catalogue 2019 www.dnp.it

DNP Industriale Srl
Via Buozzi 10 - 20861, Brugherio (MB) ITALY
Office +39 039 877451
www.dnp.it - info@dnp.it
DNP Americas
860 FM517 Alvin, TX 77511 - USA
Office +1 281 388 0253
www.dnpamericas.com

DNP Catalogue

Uploaded by

Copyright:

Available Formats

DNP Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DNP Catalogue

Uploaded by

Copyright:

Available Formats

CATALOGO 2019

DNP Catalogue 2019 www.dnp.it

STRUTTURA DEL CATALOGO / LAYOUT OF THE CATALOGUE 5

NOMOGRAMMA DI FLUSSO / FLOW NOMOGRAM 8

COMPATIBILITÁ FLUIDI-GUARNIZIONI / FLUIDS-SEALS COMPATIBILITY 9

TABELLE DI CONVERSIONE / CONVERSION TABLES 10

FILETTI DISPONIBILI / AVAILABLE THREADS 10

Prodotti Color pagina Prodotti Color pagina

CTR LOCK NUTS 319 PPV3 COLOR

GGL/GGN SWIVEL JOINTS 314 PPVX PUSH PULL/STAINLESS 209

PAO1/PAOC ISO A/STEEL/FREE FLOW 145 PST4 COLOR

PAV1 ISO A/STEEL 140 PST4 BOP COLOR

PAVX ISO A/STAINLESS STEEL 150 PST4 CS FLAT FACE/VEP/PIN LOCK 98

PBOX ISO B/STAINLESS/FREE FLOW 136 PSTF COLOR

PBV1 ISO B/STEEL 118 PTK1 TEMA/DECOMPRESSION 170

PBV1 BOP ISO B/BOP 124 PTO1 TEMA/STEEL/FREE FLOW 173

PBVM ISO B/BRASS 127 PTV1 TEMA/STEEL/POPPET 166

PBVX ISO B/STAINLESS STEEL 132 PVE1 SCREW/TRUCKS 258

PDS1 STANDARD/BALL 159 PVR1 SCREW/RoFLEX 261

PDV1 STANDARD/POPPET 154 PVS ISO 14540/700 bar/BALL 277

PGR/PGV/PSS/PSV/PNZ SPECIAL EXECUTIONS 163 PVT4 COLOR

PKK1 ISO A/DECOMPRESSION 212 PVT4 BOP COLOR

PLK4 ISO 16028/DECOMPRESSION 41 PVTF COLOR

PLS1 FLAT FACE/71 SERIES/STEEL 48 PVTX COLOR

PLSX FLAT FACE/71 SERIES/STAINLESS 52 PVTX BOP COLOR

PNO1 H SERIES/STEEL/FREE FLOW 186 VFF1 78 SERIES/WING NUT 266

PNOX H SERIES/STAINLESS/FREE FLOW 190 VFH1 75 SERIES/WING NUT 270

PNV1 H SERIES/STEEL/POPPET 177 VFH1 BOP 75 SERIES/WING NUT/BOP 274

PNVX H SERIES/STAINLESS/POPPET 182 VIV1 SCREW/DN30-DN76 254

PPK3 PUSH PULL/RIGID 221 VNR CHECK VALVES 317

PPK4 PUSH PULL/RIGID/DECOMPRESSION 224 VVT SCREW VALVE 309

PPS1 PUSH PULL/BALL 197 VVV1 SCREW/VVS/STEEL 298

PPV1 PUSH PULL/POPPET 194 VVVX SCREW/VVS/STAINLESS STEEL 302

www.dnp.it DNP Catalogue 2019 3

Nell’ultima pagina di ogni ACCESSORIES with their relative

www.dnp.it DNP Catalogue 2019 5

PERDITE DI CARICO PRESSURE DROP

6 DNP Catalogue 2019 www.dnp.it

ACCESSORI E GUARNIZIONI DI RICAMBIO ACCESSORIES AND REPLACEMENT SEALS

www.dnp.it DNP Catalogue 2019 7

Per tubi assemblati For assembled hoses

Portata/Flow in the hose (l/min)

Inside diameter of hose (mm)

Fluid velocity (m/s)

Velocità consigliata per

8 DNP Catalogue 2019 www.dnp.it

CARATTERISTICHE PHYSICAL and CHEMICAL

Prodotti Chimici 6 10 6 10 10 10 10 Chemicals

Acqua e Vapore 6 10 6 6 10 10 10 Water and Steam

Olii e Grassi MINERAL

Benzina 95-98 oct. 4 0 6 10 10 10 10 Gasoline 95-98 oct.

Gas Liquido 10 10 6 10 10 10 10 Liquid Gas

Gas Naturale 10 10 6 10 10 10 10 Natural Gas

Agenti Atmosferici 4 10 8 10 10 10 10 Weathering

Impermeabilità Gas 8 4 6 10 10 10 10 Gas Impermeability

TEMPERATURE DI LAVORO WORKING TEMPERATURE

OTTIMO 10 Particolarmente indicato per l'applicazione

www.dnp.it DNP Catalogue 2019 9

DIMENSIONI - DIMENSIONS PORTATA - FLOW

FILETTI DISPONIBILI AVAILABLE THREADS