Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Accuriopress c3080 Series Ceg

Download as pdf or txt
Download as pdf or txt
You are on page 1of 48

AccurioPress

C3080 SERIES
CUSTOMER EXPECTATIONS
GUIDE

COLOUR PRODUCTION PRINTING SYSTEM


INDEX CUSTOMER EXPECTATIONS GUIDE 2

INDEX

Introduction 3
Product overview 4
Contact 5
Expectations for technical performance and service requirements 6
Advanced services 7
CS Remote Care (CSRC) 8
Konica Minolta Color Care 9
Installation 10
Environmental and electrical requirements 12
Image quality 13
Paper specifications 15
Paper weight equipment 16
AccurioPress C3080 series productivity 18
Space requirements 19
Recommended papers 22
Technical specifications 23
Agreement 43
INTRODUCTION CUSTOMER EXPECTATIONS GUIDE 3

INTRODUCTION
Congratulations on your purchase and investment in a AccurioPress C3080/C3080P/C3070! Whether you are planning
your first investment in a digital production press or are already moving to the next level of productivity and efficiency,
you have made the right decision! Incorporating new and perfected technology, the three models in the family provide
outstanding quality, robust performance and convenience in daily operation. They are each an excellent solution for
specific digital colour print production needs and will provide you with a solid foundation for sustainable growth and
profitability.

This CUSTOMER EXPECTATIONS GUIDE is designed to help you, the operator, understand the main operational parameters
that lead to high customer satisfaction. It should help to avoid misunderstandings and will establish guidelines and mutual
agreements, and set clear performance expectations between Konica Minolta and you, our valued customer.

Please note:
– All specifications (like maximum tray capacity), are calculated according to A4, 80 gsm, if not specified different in
this document.
– All specifications refer to user selectable settings on the AccurioPress C3080 series.
PRODUCT OVERVIEW CUSTOMER EXPECTATIONS GUIDE 4

PRODUCT OVERVIEW
Entering digital production with success means that you will be able to fulfil certain standards, above all to guarantee
absolute colour consistency and deliver a superb image quality. The products in the AccurioPress C3080 series take
these challenges in their stride. They provide the ultimate performance of up to 1,681 SRA3 pages per hour with the
AccurioPress C3070, and up to 2,119 SRA3 pages per hour with the AccurioPress C3080/P. In combination with the
highest media flexibility and professional modular finishing, this is the perfect match for key operator environments.

Print volume range


The AccurioPress C3080/P models are designed for the following monthly volumes:

Average volume Optimum volume Peak volume (in Q Zone*)

A4 54,000 54,000 – 150,000 864,000

SRA3 26,000 26,000 – 75,000 432,000

The AccurioPress C3070 is designed for the following monthly volumes:

Average volume Optimum volume Peak volume (Q Zone*)

A4 32,500 32,500 – 130,000 758,000

SRA3 16,250 16,250 – 65,000 379,000

The nominal monthly engine maintenance interval for AccurioPress C3070 is about 400,000 A4 prints and for AccurioPress
C3080/P about 440,000 A4 prints. Customer expectations for print quality, run length, monthly print volumes, applications mix
and print substrates, as well as regular preventive maintenance and operator care greatly influence the main print between
service calls (MPBC) in all electro-photographic printing systems. The AccurioPress C3080 series is no exception. Customers
attending a certified Konica Minolta key operator training course generally experience improved equipment performance,
increased productivity, reduced service calls and improved overall customer satisfaction. This guide will provide additional
recommendations and guidelines to set proper expectations and further improve operations and delivered performance.

* Q Zone = quality zone


CONTACT CUSTOMER EXPECTATIONS GUIDE 5

CONTACT
Konica Minolta Europaallee 17
Business Solutions Europe GmbH 30855 Langenhagen
Phone: +49 (0) 511 / 7404 – 0
Fax. +49 (0) 511 / 741050
Branch office manager Name:

Phone:
Email:
Key account manager Name:

Phone:
Email:
System engineer Name:

Phone:
Email:
Service manager Name:

Phone:
Email:
Order for consumables Phone:

Email:
Internet:
EXPECTATION ON SERVICE CUSTOMER EXPECTATIONS GUIDE 6

EXPECTATIONS FOR TECHNICAL


PERFORMANCE AND SERVICE
REQUIREMENTS
– Service performance
Please note: The following numbers are averages and not guaranteed. Machine performance can vary widely depending on
print volume and application, customer environment, care and training.

– Service time
The utilisation of the production printing device has an impact on the required service time. While planning and scheduling
your print production you must plan downtimes for service and maintenance.

– Paper jams
While paper jams are not totally avoidable there are many
precautions that can be taken to reduce their occurrence.

– Registration
– Image-to-paper placement on a simplex print or the first
side of a duplex print can vary up to ± 0.5 mm in the feed
direction and ± 0.5 mm in the cross-feed direction. R = 0.5 mm R = 0.5 mm
– Image-to-paper alignment on the back of automatically
duplexed prints can similarly vary up to ± 0.5 mm in the feed
direction and ± 0.5 mm in the cross-feed direction.
– Front-to-back alignment can vary up to a maximum of ± 0.5
mm in the feed direction and ± 0.5 mm in the cross-feed
direction over the full sheet size. This results in a front-back
paper registration of less than 1 mm. R = 0.5 mm R = 0.5 mm

– No print area
On all media there is a leading and trailing edge deletion of
max. 4 mm and right and left edge deletion of max. 3 mm.
For thick media (above 200 gsm) the trailing edge deletion is
max. 6 mm.

– Print speed variations (PPM)


The output speed of your machine will vary depending on environmental (temperature/humidity) conditions and system
maintenance, print applications, paper size, paper thickness, user settings, print controller data streams and other factors.

Special note
Some of the following factors may negatively affect the
above expectations and results:
Note: The type of paper used has a strong
– Experience and care of operators
impact on the print results achieved. For
– Quality and cleanliness of media, materials and
optimum results the system has to operate
substrates
under proper environmental and maintenance
– Nature and cleanliness of preprinted materials
conditions, and with the correct system
– Setup, use and maintenance of peripheral accessories
settings.
– Third-party devices
– Environmental conditions
– Third-party software and workflow
- Power conditions
ADVANCED SERVICES CUSTOMER EXPECTATIONS GUIDE 7

ADVANCED SERVICES
OPERATOR REPLACEABLE UNIT-
MANAGEMENT (ORU-M)
To ensure the highest possible system uptime, Konica Minolta established the ORU-M system. This concept enables
customers to carry out preventive system maintenance and care as well as a certain amount of parts replacement
themselves, without technical/service assistance from Konica Minolta service personnel. For optimum operation
with ORU-M, Konica Minolta offers a specific training program for selected key operators. A certificate of completion
approves the operator for self-maintenance of the Konica Minolta system.

ORU-M program benefits


– The main operator can carry out maintenance tasks on the machine as part of their normal schedule to maximise uptime for
production.
– ORU-M maintenance can be carried out by the main operator to suit the production planning.
– Minimising downtime during productive daytime operation allows for a reliable, short turnaround for any print jobs.
– Self-maintenance provides a deeper understanding of the system and results in better main operator skills and overall press
management and handling.
– A skilled main operator, certified on critical machine components and maintenance tasks, improves image quality control
and overall efficiency.
– Carrying out maintenance provides a great sense of ownership among operators.
– Operator maintenance with ORU-M usually leads to extended consumables and service exchange parts life, hence reducing
production costs and overheads.

Note: An envelope fuser (EF-103) and fusing units within the ORU-M concept shouldn’t be used together. The system cannot
differentiate among the counters of three fusing units.
CS REMOTE CARE CUSTOMER EXPECTATIONS GUIDE 8

CS REMOTE CARE (CSRC)


CS Remote Care is an application which enables remote monitoring for maximised performance on each Konica
Minolta production printing device. By providing state-of-the-art machine-to-machine communication between output
devices and the Konica Minolta service organisation, all relevant system data is relayed in real time. This advises the
service side early of routine maintenance or any other required intervention.

The most important transmitted data is malfunction and maintenance notification, automated consumables ordering, copy/
print click and periodic counter reading.

Workflow

CUSTOMER KONICA MINOLTA

Logistics

Service Centre

GPRS Request GPRS


module/ module/
GSM GSM

CSRC server Backend


e-mail Service/ e-mail system (ERP)
maintenance,
consumables
requirements,
alarm messages
and counters
Fax Fax
KONICA MINOLTA COLOR CARE CUSTOMER EXPECTATIONS GUIDE 9

KONICA MINOLTA COLOR CARE


IMAGE QUALITY CONTROL AND
MANAGEMENT
With Konica Minolta Color Care, Konica Minolta offers an efficient application package to define, achieve and maintain
product-specific quality standards for any AccurioPrint or AccurioPress model. The Konica Minolta Color Care soft-
ware modules can also be accompanied by professional service offerings, precise calibration and regular maintenance
for colour production printing environments.

Key Features
– Clearly defined quality standard
– Promises superior and highly consistent print quality
– Follows market-determined principles of quality control
– Guarantees authentic colour reproduction

The Konica Minolta Color Care workflow

KONICA MINOLTA COLOR CARE SUITE

INCONSISTENT OUTPUT OPTIMISED OUTPUT


PROFILE/
EVALUATE/ANALYSE CALIBRATE APPLY COLOUR
MANAGEMENT

Reference Reference Reference


Verify Verify Verify

Confirm

REFINE
Reference
Verify

CALIBRATE PROFILE SIMULATE PRINT


INSTALLATION CUSTOMER EXPECTATIONS GUIDE 10

INSTALLATION
Please note:
The installation process depends on the organisation and contract and could differ from the following explanations.

Konica Minolta responsibilities


Before, during, and after the installation of your production printing device, different teams will be involved in ensuring that your
machine is installed as successfully as possible. The list below details the responsibilities of Konica Minolta production printing
representatives.

– On-site inspection – Service


– Power configuration, space requirements, networking – Review preventive maintenance schedules and
and others service procedures
– Review expectations – Provide ongoing production printing maintenance
– Assist in resolving hardware and software problems
– Installation team as soon as possible
– Monitor installation activities
– Schedule the delivery of the hardware
– Install your production printing device

– Training / introduction
– Provide key operation training
– Assist you in the ordering process
– Provide information and assistance on
further needs
INSTALLATION CUSTOMER EXPECTATIONS GUIDE 11

– Installation guidelines – What to expect during the installation


– The device should not be exposed to direct sunlight, – The Konica Minolta production printing technician will
external heat sources, excessive dust or vibration. inspect your production printing equipment for any
– The device must not be operated in a poorly venti- damage that may have occurred during transporta-
lated room. tion.
– The device must be located on a stable, level floor. – The installation engineer will position the machine
– Once installed, the device is a non-movable unit for into the predetermined location.
all installations on all floor types. – The installation engineer will install supplies, parts
– Machine side panels with ventilation holes must be and accessories.
kept clear from obstacles and objects so that airflow – The installation engineer will now begin the “copy
is not impeded. quality” setup.
– Any special site requirements must be communicated – Once the installation engineer is satisfied with the
to Konica Minolta prior to the commencement of performance and quality of your machine, they
installation. Additional charges may apply if special will test some documents of your choice for your
equipment is required. inspection.
– Konica Minolta is not responsible for the load bearing
capacity of floors, walls, ceilings, fixtures and fittings
specific to the installation site. Constant quality control
– Konica Minolta is not responsible for any additional
building or civil engineering work carried out prior to, Constant product quality is one of the most important
during or after the completion of installation. conditions for optimum operation of a new production
printing device. New products in particular have to be
monitored to eliminate weak points as soon as they occur.
Therefore, Konica Minolta Service checks the field quality
of newly launched products regularly so counteraction can
be taken immediately.
ENVIRONMENTAL AND ELECTRICAL REQUIREMENTS CUSTOMER EXPECTATIONS GUIDE 12

ENVIRONMENTAL AND
ELECTRICAL REQUIREMENTS
To minimise downtime and guarantee customer satisfaction it is mandatory that the device operates at all times within
the recommended range of environmental specifications. It is the responsibility of the customer to ensure that the
production printer’s environmental requirements are met at all times.

Environmental Minimum Maximum

Temperature 10°C 30°C

Relative Humidity 10% 80%


(% RH)

Optimum performance is achieved when conditions are strictly maintained at 18 – 23°C and 40 – 60% RH (Q Zone).
Poor alignment of paper in the trays of LS, FS-532, FS-531, SD-506 may occur at lower humidities. This can be minimised
by keeping the machine within the recommended range of environmental specifications.

Power consumption AccurioPress C3080 AccurioPress C3080P AccurioPress C3070

Maximum 3,600 W 3,700 W 4,200 W

Consumption during 2,600 W 2,600 W 2,800 W


printing

Standby
Without energy saving mode 610 W 570 W 610 W
With energy saving mode 195 W 185 W 195 W
Sleep mode 1.8 W 1.8 W 1.8 W
Plug-in mode 0.36 W 0.36 W 0.36 W

Current Loads 220 – 240 V 220 – 240 V 220 – 240 V

Rated Power 25 Amps 25 Amps 25 Amps


IMAGE QUALITY CUSTOMER EXPECTATIONS GUIDE 13

IMAGE QUALITY
Our perception of print quality varies greatly depending on such factors as ambient light conditions, paper quality,
texture, moisture content and colour, all of which have an influence on the image quality achieved. The print quality might
also change over time. If the output quality of a Konica Minolta system is questioned, in the first instance this should be
checked using a standard Konica Minolta print test page.

Some of the common image quality issues that are experienced by all electro-photographic printers are:
– When printing a large area with high toner coverage, small variations across the area may be seen. This will be influenced by
toner density and paper stock, amongst other factors.
– Depending on the paper qualities used, the paper finish (surface) may be responsible for a “grainy” appearance in the
halftone areas. In some difficult cases alternative media may need to be sought. Some papers may show a slight back-
ground when viewed through a magnifying glass.
– Heavier paper weights and high toner coverage may produce output with visible roller marks. This effect can be reduced by
printing face up and single-sided.
– Small random density variations may occur in the form of slight bands or lines throughout the image area. There may also
be very small shifts in density over a period of time. When producing the second side of a two-sided print, there may be
patchiness in density and break-up of fine line work. To minimise the occurrence of these issues, it may be recommended to
print the side with the lesser density first (toner coverage).
– Slight banding is to be expected in all electro-photographic processes and may at times be noticeable in some image areas.
– For optimum output quality it is recommendable to print on high-quality digital paper. Please refer to the “Recommended
papers” section.
– White spots with or without coloured core are a common issue in all dry toner/cut sheet-fed printing devices. The print may
at times deliver output that exhibits white spots caused by paper dust or other undesired particles. This will be minimised
by keeping the machine in a clean, dust-reduced environment and by regularly wiping the paper transport areas with an
anti-static, dust-free cloth. Always ensure that the cut edges of the sheets are dust-free, in particular when cutting paper
in-house.
– After printing longer runs of black and white only jobs in process colour mode, the colour quality may show higher variations
in the subsequent colour jobs. It is recommendable to avoid such sequences by:
– Printing long monochrome jobs in B&W mode exclusively
– Reducing long runs of monochrome printing by introducing colour jobs at regular intervals
– Consulting your Konica Minolta service expert
– On heavyweight coated papers, gloss differential (uneven appearance of gloss) may occur.
– When printing on a heavy paper weight and folding this printed paper, the toner at the position of paper folding may peel
off. This problem frequently occurs with thick paper when printing a high coverage image at the folding position. The result
is a white line on the fold.
– When always printing on heavy paper weights, a shorter maintenance cycle is to be expected.
– When printing on very limp papers (like coated papers below 120 gsm) with high toner coverage to the edge of the papers,
paper jams may occur in the fusing unit.
IMAGE QUALITY CUSTOMER EXPECTATIONS GUIDE 14

Duplex Printing
The device will automatically duplex print (if properly specified in the print settings) paper weights of 62 to 350gsm in sizes up to A3,
A3+ and SRA3. Special attention is required when duplex printing on heavyweight paper. The image quality and consistency of the
second side may not equal that of the first side. A combination of high toner coverage on the first side, high-gloss papers and high
paper weights will compound the adverse effects of duplexing on heavyweight papers.

Some factors can improve job performance on heavyweight substrates, such as:

– Lowering toner area/density coverage.


– Testing and consulting with your Konica Minolta service expert.
– Non-standard sized duplexing is supported as long as the paper dimensions are input by the operator and assigned to the
correct paper tray.

Image alignment
– Front-to-back image alignment for duplex output has a registration accuracy of ± 0.5 mm or less over the document length per
side. If required, “Chart Adjustment” is available from the operator setup menu for each individual paper stock to correct image
alignment.
– Factors affecting image alignment include paper type, paper weight, paper moisture content, paper geometrical accuracy,
machine setup and feed direction.

Reprint capabilities
– The device output should not be reprinted a second time using electro-photographic processes, but can be used for post
insertion.
– Similarly, prints produced on any AccurioPrint or AccurioPress model or other electro-photographic devices should not be
reprinted on the device.
– If it is necessary to reprint on other output systems, we recommend thoroughly testing the preprinted paper processing first.
Successful reprinting will depend on many factors, including the fusing temperature and the toner reaction in regards to a
second fusing, and may not be possible.
PAPER SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 15

PAPER SPECIFICATIONS
Paper setting
This section describes how to set the paper settings for each paper tray. Feature descriptions and usage of auto paper and image
rotation are also provided.

The paper settings come in two classes: the paper tray settings, for which paper conditions must be stipulated, and the specific
paper settings.

Reference
To register paper conditions for the paper to be used, see Section Copy → Basic Settings → Paper Settings of the User’s Guide.
Paper conditions specified for a paper tray can also be registered (e.g. for later reuse). The procedure is provided in this section.
Paper settings can be determined for the following trays:
– Main body trays (trays 1 to 2)
– Trays of paper feed unit PF-602m (trays 3 to 4)
– Trays of paper feed unit PF-707m (trays 3 to 5)
– Upper tray/lower tray of the post inserter of folding unit FD-503
– Cover tray of perfect binder PB-503

The paper settings for a given paper tray are determined according to the following nine paper conditions:
– Paper type: plain, fine, colour-specific, coated-GL, coated-ML, coated-GO, coated-MO
– Paper size: standard, custom, tab paper
– Weight: 62 – 74 gsm, 75 – 80 gsm, 81 – 91 gsm, 92 – 105 gsm, 106– 135 gsm, 136– 176 gsm, 177– 216 gsm, 217– 256 gsm,
257– 300 gsm, 301– 350 gsm
– Coloured paper: white, non-white
– Punch: pre-punched, no hole punch
– Both sides adjustment: specify magnification ratios (vertical, horizontal) and image shift amounts (up/down, right/left) for
both front and back sides in order to better align (register) the images printed on front and back pages in duplex printing.
Also, chart adjustments can be performed for both front and back as described in the user manual.
– Curl adjustment: make corrections for curled output sheets. Select ON or OFF for humidifier setting if relay unit RU-518
is equipped with the optional humidifier HM-103. Setting the humidifier setting to ON may help significantly reduce curled
output.
– Air-assist is required for peripheral options featuring this function, such as paper feed unit PF-602m (trays 3 to 4) and the
cover tray of perfect binder PB-503. Air-assist ON helps to greatly reduce “double feeds” or misfeeds from the feeder paper
stack.

Paper size
With the tray specified as “standard”, the machine automatically detects the standard size loaded in that tray.

Paper trays weight


Paper trays Weight
Main body trays (trays 1 to 2) 62 – 216 gsm (256 gsm for A4 or larger)
Paper feed unit PF-602m (trays 3 to 4) 64 – 256 gsm (upper tray), 64 – 300 gsm (lower tray)
Paper feed unit PF-707m (trays 3 to 5) 62 – 350 gsm
Cover tray of perfect binder PB-503 81 – 209 gsm
Post inserter (equipped in folding unit FD-503 as standard) 50 – 300 gsm
Large capacity unit LU-202m/XLm 64 – 300 gsm
Manual bypass tray MB-506 62 – 350 gsm
The setting or registration/deletion of paper weights to be specified for each paper tray is available in the paper setting menu from the machine screen.
NOTE: Be sure to use paper only of the specified weight for the tray; otherwise copy quality may deteriorate and/or machine trouble may occur.
PAPER SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 16

Paper weight equipment


Paper trays Weight
ADU 62 – 350 gsm
Relay unit RU-510 62 – 350 gsm; 62 – 216 gsm (reverse exit/conveyance mode)
Relay unit RU-518 62 – 350 gsm straight paper exit
Stapling unit FS-532 Primary (main) tray 62 – 300 gsm; staple: 62 – 300 gsm
Secondary (sub) tray 62 – 350 gsm
Open stacker OT-510 62 – 350 gsm
Output tray OT-511 62 – 350 gsm
Saddle stitching kit SD-510 (for FS-532) Fold & staple: content sheet: 62 – 216 gsm
Cover sheet: 62 – 300 gsm (depending on media type)
Saddle stitcher tray:
62 – 80 gsm: 20 sheets (19 sheets + 1 sheet)
81 – 91 gsm: 16 sheets (15 sheets + 1 sheet)
92 – 216 gsm: 5 sheets (4 sheets + 1 sheet)
217 – 244 gsm: cover only
245 – 300 gsm: cover only
Letter fold-in mode:
62 – 91 gsm: 3 sheets
92 – 105 gsm: 1 sheet
Centre-fold mode:
62 – 216 gsm: 1 – 5 sheets
217 – 300 gsm: 1 sheet
Folding and punching unit Fold mode tray Half-fold, tri-fold-in, tri-fold-out: 62 – 130 gsm
FD-503 Double-parallel-fold; gate-fold: 62 – 91 gsm
Primary (main) tray 62 – 350 gsm; punch: 62 – 216 gsm
Stacking unit LS-506 Secondary (sub) tray 62 – 350 gsm
Primary (main) tray 62 – 350 gsm
PRODUCTIVITY CUSTOMER EXPECTATIONS GUIDE 17

Paper trays Weight


Booklet making unit SD-506 Secondary (sub) tray 62 – 350 gsm
Saddle stitcher tray See also page 32 for a complete overview of paper types, paper weights and covers.
Multi tri-fold mode tray 62 – 81 gsm: 5 sheets; 82 – 91 gsm: 3 sheets
Booklet making unit Secondary (sub) tray 62– 350 gsm
SD-513 Saddle stitcher tray Fold & staple, trimming: 50 – 300 gsm
See also page 34/35 for a complete overview of paper types, paper weights and covers.
Spine corner forming unit FD-504 (Option for SD-513) 64 – 216 gsm
Slitting unit TU-503 (Option for SD-513) 80 – 300 gsm
Creasing unit CR-101 (Option for SD-513) 80 – 300 gsm (the maximum paper weight conforms to the function that is
combined with the crease mode)
Perfect binding unit PB-503 Secondary (sub) tray 62 – 300 gsm
Perfect binder tray Body: 62 – 105 gsm; cover: 82 – 216 gsm
Conveyance section 62 – 300 gsm
Multi (GBC) punching unit GP-501 62 – 350 gsm straight paper exit
Punch mode: 75 – 216 gsm plain; 120 – 216 gsm other
Auto ring binding unit GP-502 Content sheet: 75 – 120 gsm
Cover sheet: 163 – 216 gsm
Insert: 75 – 120 gsm
Numbers of sheets per book: 7 – 102 sheets
GBC Punch G2 By pass mode: 62 – 350 gsm (16 lb bond – 130 lb cover)
Punch mode: 75 – 300 gsm plain; 120 – 300 gsm coated
Watkiss Powersquare™ Saddle stitch mode 60 – 250 gsm
224KR (online)
Front trimming mode 60 – 250 gsm
Squarefold mode 60 – 250 gsm
Side trimming mode 60 – 250 gsm
Plockmatic SD-350/SD-500 Booklet maker module 64 – 300 gsm
Cover feeder module 64 – 250 gsm
Square fold module 64 – 300 gsm
Trimmer module 64 – 300 gsm
Rotate crease trim 64 – 300 gsm
module
PRODUCTIVITY CUSTOMER EXPECTATIONS GUIDE 18

AccurioPress C3080 series


PRODUCTIVITY
Productivity per hour
– The maximum print speed per minute for A4 LEF (long edge feed) size is 71 ppm for AccurioPress C3070 and 81 ppm for
AccurioPress C3080/P.
– The maximum speed per minute for A3 size is 39 ppm for AccurioPress C3070 and 45 ppm for AccurioPress C3080/P.

Many internal process functions are performed during printing to maintain high and stable image quality within and across print jobs.
– Toner supply management for transfer belt cleaning
– Colour separation registration
– Maximum density & density control
– Gamma correction

Moreover, the AccurioPress C3080 series has two basic running modes, depending on the primary objective of a typical
job run or series of jobs:
– High-quality mode: internal processes slow down the output speed to favour the highest quality capabilities of the
AccurioPress C3080 series.
– High productivity mode: speed is favoured at the expense of a slightly lower print quality.

As a consequence, true productivity per hour is as follows:

AccurioPress C3080 AccurioPress C3070

Per hour (colour & B/W) Speed mode Quality mode Per hour (colour & B/W) Speed mode Quality mode

A4 4,399 pph 4,124 pph A4 3,823 pph 3,823 pph

A3 2,439 pph 2,367 pph A3 2,113 pph 2,058 pph

SRA3 2,113 pph 2,058 pph SRA3 1,951 pph 1,903 pph

Production speed
The following charts show the AccurioPress C3080/P The following chart shows the AccurioPress C3070 simplex
simplex production speed in relation to paper weight. The production speed in relation to paper weight. The data is for
data is for A4 LEF, A3 and SRA3 paper in normal mode. A4 LEF, A3 and SRA3 paper in normal mode.

AccurioPress C3080 AccurioPress C3070

Paper weight A4 A3 SRA3 Paper weight A4 A3 SRA3

62 – 216 gsm 81 45 39 62 – 216 gsm 71 39 36

217 – 350 gsm 51 28 26 217 – 350 gsm 45 26 24

While a digital press does not stop after each print cycle, the paper path must still be cleared between jobs. When using various
paper types and sizes during a print cycle, a new job can only be printed after the last page of the current print job has been
output. By grouping several jobs with the same (paper) settings into batches, the number of job transmissions to the controller
will be reduced and the time lost between print jobs will be reduced.

In case of certain system errors, the digital press and RIP power must be switched off (full system reset) and on again for
recovery. This means that a print job will have to be sent and RIPed again.
PRODUCTIVITY CUSTOMER EXPECTATION GUIDE 19

SPACE REQUIREMENTS
If the device is installed in a carpeted room, it will be impossible to move the system at all. In such environments we
recommend the use of a metal base plate underneath the colour press to guarantee a completely safe and convenient
installation.

All standard Konica Minolta space requirements apply to this installation, including the space above, in front of and at the back
of the system, as well as shared, aisle or hallway, and operator space.

Module Width (mm) Depth (mm) Height (mm) Weight (kg)


Engine 800 903 1,076 319 (P-version 312)
RU-518 410 787 1,135 95.4
PF-602m 947 750 1,045 171
PF-707m 996 772 1,038 203
IQ-501 663 696 1,020 184
FD-503 (main tray not included) 400 723 1,231 130
MB-508 296 636 795 31.5
LU-202m 710 639 477 42
LU-202XL 1,012 639 477 60
LS-506 785 723 1,020 110
SD-506 1,170 775 1,020 280
with bundle tray pulled out 1,441
SD-513 1,170 1,431 1,020 337
with booklet tray 1,477
FS-532 with installed main tray 798 723 1,070 74

PB-503 1,360 775 1,223 270

GP-501 350 775 1,020 80

RU-510 350 775 1,020 35

GP-502 655 944 1,020 193

OT-510 844 723 1,020 55

OT-511 456 230 367 (with extended tray) 2

GBC Punch G2 445 775 1,020 95

Watkiss Powersquare™ 224KR 3,270 1,840 1,560 690

Plockmatic SD-350 / SD-500 2,940 905 1,000 459


PRODUCTIVITY CUSTOMER EXPECTATIONS GUIDE 20

Calculating the required space


Use the following instructions and table to calculate the total space required for the installation of the digital press.
Please use the diagram provided with the calculation table for a visual impression of the required space.

How to calculate the space requirements


– Indicate in the table below all modules to be installed at the location.
– Add the widths of all marked modules and enter the sum in line two under the width column.
– Add 500 mm for the left space requirement and 800 mm for the right space requirement to this total.
– Enter the total width required for the installation in the shaded area in line seven.
– Add 1,400 mm as the front space requirement to the engine depth of 500 mm; also add the rear space requirement, whic
depends on the system being installed as movable or non-movable.
– Enter the total depth required for the installation in line seven. These figures are the minimum width and depth of the space
required for the system to ensure safe working conditions for operators and the Konica Minolta service representatives.

Calculation table
Steps to follow as described above Module Width (mm) Depth (mm)
1 Components space Engine 800 903
RU-518 410 787
PF-602m 947 750
PF-707m 996 772
MB-508 296 636
IQ-501 663 696
FD-503 400 723
IQ-501 663 696
LS-506 785 723
SD-506 1,170 775
SD-513 1,241 1,431
FS-532 798 723
PB-503 1,360 775
GP-501 305 775
RU-510 350 775
GP-502 655 944
LU-202m 710 639
LU-202XLm 1012 639
OT-510 844 723
OT-511 456 230
GBC Punch G2 445 775
Watkiss Powersquare™ 3,270 1,840
224KR
Plockmatic SD-350 / SD-500 2,940 905
2 Total space taken up by the system
3 Left space (recommended) 500
4 Right space (recommended) 800
5 Rear space (recommended) 500
6 Front space (recommended) 1,400
7 Total workspace requirement
SPACE REQUIREMENTS CUSTOMER EXPECTATIONS GUIDE 21

DEPTH

Left 500 mm

FINISHER

RU-518 WIDTH

Front 1400 mm Rear 500 mm


ENGINE

PAPER FEED
UNIT
Right 800 mm
RECOMMENDED PAPERS CUSTOMER EXPECTATIONS GUIDE 22

RECOMMENDED PAPERS
The AccurioPress C3080 series supports an extensive range of media. Exclusively using media recommended by
Konica Minolta can help maximise your system’s reliability and paper-handling capabilities. Konica Minolta representa-
tives will be happy to assist you with more details on media selection and processing as well as provide you with
specific recommendations.

Manufacturer Brand Name Paper Type Paper Weight (gsm)


Konica Minolta Konica Minolta Original Uncoated, Color Specific 80
Konica Minolta Konica Minolta Profi Uncoated, Plain 80
mondi Color Copy Uncoated, Color Specific 90
mondi Color Copy Uncoated, Color Specific 100
mondi Color Copy Uncoated, Color Specific 120
mondi Color Copy Uncoated, Color Specific 160
mondi Color Copy Uncoated, Color Specific 200
mondi Color Copy Uncoated, Color Specific 220
mondi Color Copy Uncoated, Color Specific 250
mondi Color Copy Uncoated, Color Specific 280
mondi Color Copy Uncoated, Color Specific 300
mondi Color Copy Uncoated, Color Specific 350
Clairefontaine DCP white Uncoated, Color Specific 280
Konica Minolta Konica Minolta Color+ Uncoated, Color Specific 90
Stora Enso Superior Uncoated, Color Specific 160
mondi Color Copy coated glossy Coated Gloss, Laser 135
mondi Color Copy coated glossy Coated Gloss, Laser 170
mondi Color Copy coated glossy Coated Gloss, Laser 200
mondi Color Copy coated glossy Coated Gloss, Laser 250
sappi Magno Star Coated Gloss, Offset 200
Zanders Silver Image supergloss Coated Gloss, Laser 250
mondi Color Copy coated silk Coated Matt, Laser 135
mondi Color Copy coated silk Coated Matt, Laser 170
mondi Color Copy coated silk Coated Matt, Laser 200
mondi Color Copy coated silk Coated Matt, Laser 250
Konica Minolta Konica Minolta Semiglossy Reference Coated Matt, Laser 130

Note:
– Heavyweight papers typically show increased deviations in formation and surface smoothness, which may result in reduced
image quality.
– It is not recommendable to use coated stock in ambient conditions where relative humidity exceeds 60 per cent.
– Stretching occurs in all paper qualities during printing. Ambient conditions and the paper type determine the amount of
stretch, which is most prominent in coated stocks and may affect front-to-back image registration.
– Toner adherence depends heavily on the media type, and toner may not last on some types of special-coated paper. Some
media may be inappropriate for the device. Consult the Media Database which lists certified and approved media, or your
Konica Minolta service expert. Unlisted media may be inappropriate, or should at least be tested prior to production work to
find out appropriate settings (if any) that ensure acceptable toner adhesion.
– Custom-cut paper can cause problems with image registration, image quality (i.e. white spots), and machine reliability. This
is particularly likely if the paper is of poor quality, has been badly cut or if loose fibres remain on the edges after cutting.
– Image registration, image quality (i.e. white spots), and machine reliability might suffer if poor-quality punched or drilled
paper is used. This is very likely to happen if loose hole plugs remain in the paper ream – measures must be taken to avoid
this eventuality at all costs.
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 23

TECHNICAL SPECIFICATIONS
LU-202m – LARGE CAPACITY UNIT
Type Paper feed unit
Capacity 2,500 sheets
Paper weight 64 – 300 gsm
Paper format 210 x 182~330 x 487.7 mm
(with MK-746:100 x 148 mm~, Envelope: 90 mm width~)
Min. 182 x 210 (Envelope: 90 mm width)
Max. 330 x 487.7 mm

LU-202XLm – LARGE CAPACITY UNIT


Type Paper feed unit
Capacity ~487.7 mm: 2,500 sheets
~762 mm: 1,000 sheets
~762 mm coated paper: 500 sheets
Paper weight 64 – 300 gsm
Paper format 210 x 182~330 x 762 mm
(with MK-746:100 x 148 mm~, Envelope: 90 mm width~)
Min. 182 x 210 (with MK-746: 100 x 148 mm~, Envelope: 90 mm width~)
Max. 330 x 762 mm

MB-506 – MULTI BYPASS TRAY


Type Multi bypass tray
Capacity 250 sheets
Paper weight 62 – 350 gsm
Paper format SRA3, A3, B4, SRA4, A4, SRA4S, A4S, B5, B5S, A5, A5S, B6S, A6S
Min. 100 x 148 mm
Max. 330 x 487 mm
Weight 4.2 kg
Power source From main body
Max. power consumption 28 W or less

MB-508 – MULTIPLE BYPASS TRAY FOR PF-707M


Type Multi bypass tray
Capacity 250 sheets
Paper weight 62 – 300 gsm (487.8 – 1,300 mm: 128 – 256 gsm)
Paper format SRA3, A3, B4, SRA4, A4, SRA4S, A4S, B5, B5S, A5, A5S, B6S, A6S
Min. 100 x 148 mm
Max. 330 x 1300 mm with MK-740
Weight 60 kg
Power source From mainbody
Max. power consumption 100W
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 24

PF-602m – PAPER FEED UNIT


Type Paper feed unit
Upper tray
Capacity 3,000 sheets
Paper weight 64 – 256 gsm
Paper format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, SRA3, SRA4, SRA4S,
custom paper sizes
Min. 100 x 182 mm
Max. 330 x 487 mm
Lower tray
Capacity 3,000 sheets
Paper weight 64 – 300 gsm
Paper format A3, B4, A4, A4S, A5, A6S, B5, B5S, A5, A5S, B6S, A6S, SRA3, SRA4,
SRA4S, custom paper sizes
Min. 100 x 148 mm
Max. 330 x 487 mm
Other specifications
Dimension (W x H x D) 947 x 1,045 x 750 mm
Weight 171 kg
Power source From main body
Max. power consumption 100 W or less

PF-707m – PAPER FEED UNIT


Type Paper feed unit
Upper tray
Capacity 1,390 sheets
Paper weight 62 – 350 gsm
Min. 100 x 148 mm
Max. 330 x 487 mm
Middle tray
Capacity 1,390 sheets
Paper weight 62 – 350 gsm
Min. 100 x 148 mm
Max. 330 x 487 mm
Lower tray
Capacity 1,850 sheets
Paper weight 62 – 350 gsm
Min. 100 x 148 mm
Max. 330 x 487 mm
Other specifications
Dimensions (W x H x D) 996 x 1,038 x 772 mm
Weight 203 kg
Power source Own power cord
Max. power consumption 580 W or less
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 25

RU-518 – RELAY UNIT


Type Relay unit with paper straightening functionality
Decurling Mechanical zigzag decurling
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, ISO-B4, ISO-B5, ISO-B5S,
ISO-B6S, SRA3, SRA4, SRA4S, postcard-S, custom paper sizes, standard
tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media type As main body
Curl straightening Specific setting mode: 10 mm or less (curl before straightening: 40 mm
or less)
Option HM-103 (humidification unit)
Dimensions (W x H x D) 410 x 1,135 x 787 mm
Weight Approx. 95.4 kg
Power source Own power cord
Max. power consumption 600 W or less

HM-103 – HUMIDIFICATION UNIT


Function Water supply/humidifying roller/water tank section
Compatibility RU-518
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, ISO-B4, ISO-B5, ISO-B5S,
ISO-B6S, SRA3, SRA4, SRA4S, postcard-S, custom paper sizes, standard
tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media type As main body
Weight Approx. 30 kg
Power source 24/5VDC (supplied from RU-518)

HT-511 – HEATING UNIT


Product name HT-511
Type Heating unit for main body paper trays
Compatibility Main body

HT-504 – HEATING UNIT


Product name HT-504
Type Heating unit for paper feed units
Includes 2 heaters for each tray
Compatibility PF-602m

HT-506 – HEATING UNIT


Product name HT-506
Type Heating unit for paper feed units
Includes 3 heaters for each tray
Compatibility PF-707
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 26

IQ-501 – INTEGRATED COLOR CARE UNIT *


Type In-line scanner + spectrophotometer
Media format 100 x 139,7 mm
330,2 x 487,7 mm
Media weight 62 – 350 gsm
Other specifications
Dimension (W x D x H) 663 x 696 x 1,020 mm
Weight 184 kg
Power source Own power cord
Power consumption 700 W
Durability 90,000,000 or 7 years whichever comes first.
Spectrophotometer is 5 years.
*only for AccurioPress C3080 and C3080P

GP-501 – MULTI (GBC) PUNCHING UNIT


Type GBC puncher
Punch mode
Media format A4
Media type For bypass: Coated, Preprinted, High Quality, Plain, Book, Color, Rough,
Post Card, Label, OHP, Index
For punching: Coated, Preprinted, High Quality, Plain, Book, Color
Media weight Plain: 75 – 216 gsm
Other: 120 – 216 gsm
Punch precision Hole size: + 2% or less
Position: + 0.5 mm or less
Burr: + 0.3 mm or less
Power performance Offset: + 2 mm or less
Speed change: -30 ms or less
Punch trash capacity 2,500 cycle
Other specifications
Options DS-508 - DS-513, DS-515 - DS-518
Dimension (W x H x D) 305 x 1,020 x 775 mm
Weight 80 kg
Power source Own power cord
Power consumption Less than 500 W
Through pass 50 million or 5 years
Punching operation 20 million
DS-508 - DS-513, DS-515 - DS-518 500 K
DS-514 300 K
DIE sets
Media format A4
DS-508 Ring binder 4-hole, 6,5mm diameter

DS-509 Plastic bind Cerlox standard 21-hole

DS-510 Wire bind - 3:1 34 hole 4 mm diameter

DS-511 Wire bind - 2:1 23-hole 6,38 mm diameter

DS-512 Color Coil - 4:1 47-hole


TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 27

DS-513 VeloBind - 1:1 round 12-hole

DS-514 ProClick A4 34-hole die set

DS-515 Ring binder 2-hole A4 die set 6,5mm


diameter

DS-516 Plastic bind Cerlox 20-hole

DS-517 W2 Wire bind A4 square hole side set for


Australia

DS-518 W3 Wire bind A4 square hole side set for


Australia

4-hole loose leaf HD die set

21-hole ComBind HD die set

34-hole round WireB HD die set

RU-510 – RELAY UNIT


Type Paper relay unit with paper reverse functions
By pass mode
Media format Min.: 100 x 148 mm
Max.: 330 x 463 mm
Media weight 62 – 350 gsm
Reverse mode
Media format A4
Media weight Plain: 75 – 216 gsm
Other: 120 – 216 gsm
Other specifcations
Dimension (W x H x D) 410 x 1,020 x 723 mm
Weight Approx. 35 kg
Power source From main body
Power consumption 79 W
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 28

GP-502 – AUTO RING BINDING UNIT


Type Automatic (GBC) ring binder
Modes Binding mode, through pass mode
Binding mode
Media format A4, A4 tab
Media type Plain, high-quality, tab, OHP (front cover only)
Media weight Content pages: 75 – 120 gsm
Cover pages: 163 – 216 gsm
Inserts: 75 – 120 gsm
Number of sheets per book (incl. front and back cover) 75 gsm: 7 – 102 sheets
80 gsm: 7 – 96 sheets
90 gsm: 7 – 85 sheets
100 gsm: 7 – 76 sheets
120 gsm: 7 – 64 sheets
Book tray capacity 7-sheet booklet – 30 books or less
20-sheet booklet – 25 books or less
102-sheet booklet – 8 books or less
Other specifications
Dimensions (W x H x D) 655 x 1,020 x 944 mm
Weight 183 kg
Power source Own power cord
Power consumption Less than 190 W
Through pass 60 million or 5 years
Punch and binding operation 18 million or 5 years
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 29

FD-503 – PUNCHING AND FOLDING UNIT


Type Multi-folding device with punch and post inserter functions
Modes Straight mode, punch mode, fold mode, PI mode, sub tray mode
Straight mode
Function Exit to main tray without process
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, SRA3, SRA4, SRA4S, ISOB5,
ISOB5S, ISOB4, custom paper sizes, standard tab paper
Min. 100 x 148 mm
Max. 330 x 483 mm
Media weight 62 – 350 gsm
Tray capacity 2,500 sheets: A4, A4S, JISB5, ISOB5, ISOB5S
1,500 sheets: A3, B4, SRA3, SRA4, SRA4S, ISOB4
500 sheets: A5, A5S, B6S
Punch mode
Function Exit to main tray after punching process
Media formats 2 holes A3, B4, A4, A4S, B5, B5S, A5, A5S, SRA4S, ISOB5, ISOB5S, ISOB4,
Standard tab paper
Media formats 4 holes A3, B4, A4, B5, standard tab paper
Media weight 62 – 216 gsm (via post insertion down to 50 gsm)
Hole diameter 2 holes: 6.5 mm/80 mm hole pitch
4 holes: 6.5 mm/80 mm hole pitch
Adjustment Range: +4 mm
Accuracy: 0.2 mm
Punch trash box capacity 10,000 punch cycles
Fold mode
Function Exit after folding process
Type 1 Centre-fold/letter fold-in/letter fold-out/Z-fold
Type 2 Double-parallel-fold/gate-fold
Media format A3, B4, A4S, SRA4S, custom paper sizes
Min. 210 x 279 mm
Max. 305 x 458 mm
Media weight Type 1: 62 – 130 gsm
Type 2: 62 – 91 gsm
(via post insertion down to 50 gsm for both)
PI mode
Function Feed cover paper/paper to be inserted
Media format A3, B4, A4, A4S, B5, B5S, A5, SRA3, SRA4, SRA4S,
custom paper sizes, standard tab paper
Min. 182 x 140 mm
Max. 330 x 483 mm
Media type Plain, recycle, fine, special
Media weight 50 – 300 gsm
Tray capacity 2 x 500 sheets
Sub tray mode
Function Exit to sub tray without process
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, Postcard-S, SRA3, SRA4,
SRA4S, ISOB5, ISOB5S, ISOB4, custom paper sizes, standard tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media weight 62 – 350 gsm (via post insertion down to 50 gsm)
Tray capacity 200 sheets (without folder tray)
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 30

Other specifications
Dimensions (W x H x D) 400 x 1,231 x 723 mm (width: without main tray)
- Width with main tray included (stored): 667 mm
- Width with main tray included (pulled out): 784 mm
Weight Approx. 130 kg
Power source Own power cord
Power consumption 180 W
Durability 50 million or 5 years

LS-506 – STACKING UNIT


Type Large capacity stacker of horizontal stacking with gripper conveyance
Modes Straight mode, offset mode, sub tray mode
Straight mode
Function Exit to stacker without finishing
Media format A3, B4, A4, A4S, B5, A5, SRA3, SRA4, SRA4S, ISOB5, ISOB4, custom paper
sizes, standard tab paper (1-15 tab except for 4, 10)
Min. 148 x 219 mm
Max. 210 x 483 mm
Media type Plain, high-quality, colour-specific, coated
Media weight 62 – 350 gsm
Tray capacity 5,000 sheets: A3, B4, A4, A4S, SRA3, SRA4, SRA4S, ISOB4
2,000 sheets: B5, A5, ISOB5
3,000 sheets: coated paper, paper length 380 mm or more
Sub tray mode
Function Exit to sub tray without finishing
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, postcard-S, SRA3, SRA4,
SRA4S, ISOB5, ISOB5S, ISOB4, custom paper sizes, standard tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media type All engines supported
Media weight 62 – 350 gsm
Tray capacity 200 sheets (not folded)
Other specifications
Dimension (W x H x D) 785 x 1,020 x 723 mm
Weight Approx. 110 kg
Power source From main body
Power consumption 143 W or less
Durability 50 million or 5 years
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 31

SD-506 – BOOKLET MAKING UNIT


Type Saddle stitch unit that binds folded paper
Modes Saddle stitch mode, trimming mode, multi-sheet half-fold mode, multi-sheet letter fold-in
mode, sub tray mode
Saddle stitch mode
Function Exit to saddle stitch tray after fold & stitch process
Media format A3, B4, A4S, B5S, SRA3, SRA4S, ISOB4, custom paper sizes
Min. 182 x 257 mm
Max. 324 x 463 mm
Media type Plain, fine, colour-specific, coated
Media weight 62 – 244 gsm
Staple page See also page 32 for a complete overview of paper types, paper weights and covers.
Staple position Adjustable (90 – 165 mm)
Tray capacity 2 – 10 stapled sheets: 50 sets or more
11 – 20 stapled sheets: 30 sets or more
21 – 40 stapled sheets: 20 sets or more
41 – 50 stapled sheets: 15 sets or more
Trimming mode
Function Exit to saddle stitch tray after trimming
Media format A3, B4, A4S, B5S, SRA3, SRA4S, ISOB4, custom paper sizes
Min. 182 x 257 mm
Max. 324 x 463 mm
Media type Plain, high-quality, colour-specific, coated
Media weight 62 – 244 gsm
Max. sheets for trim 50 sheets (80 gsm) x 2 = 100 sheets
49 sheets (80 gsm) + 1 sheet (200 gsm) x 2 = 100 sheets
Trim position 1 edge (opposite to saddle)
Trim trash box capacity Trim of 10,000 sheets or more
Multi-sheet half-fold mode
Function Exit to saddle stitch tray after folding 1 or more sheets
Media format A3, B4, A4S, B5S, SRA3, SRA4S, ISOB4, custom paper sizes
Min. 182 x 257 mm
Max. 324 x 463 mm
Media weight 62 – 244 gsm
Max. multiple sheets 62 – 81 gsm: 5 sheets
82 – 130 gsm: 3 sheets
131 – 244 gsm: 2 sheets
Tray capacity 30 sets
Multi-sheet letter fold-in mode
Function Exit to 3-fold tray after 3-folding 1 or more sheets
Media format A4S
Media weight 62 – 91 gsm
Max. multiple sheets 62 – 81 gsm: 5 sheets
82 – 91 gsm: 3 sheets
Tray capacity 20 sets
Sub tray mode
Function Exit to sub tray without process
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, postcard-S, SRA3, SRA4, SRA4S, ISOB5,
ISOB5S, ISOB4, custom paper sizes, standard tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media weight 62 – 350 gsm
Tray capacity 200 sheets (Z-fold: 20 sheets/centre-fold: 40 sheets)
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 32

Other specifications
Dimension (W x H x D) 1,170 x 1,020 x 775 mm (saddle stitch tray stored)
1,170 x 1,020 x 1,441 mm (saddle stitch tray pulled out)
Weight Approx. 280 kg
Power source From main body
Power consumption 270 W
Durability 50 million or 5 years
Finishing operation 25 million
Booklets without cover
Weight Max no. of paper in fold & staple/SQF/trimming model *1 (Sheets)
Normal paper Fine paper Coated paper Long grain paper
Color paper
50 – 64 50 50 30 30
65 – 81 50 50 30 30
82 – 91 30 30 15 15
92 – 130 20 20 10 10
131 – 161 15 15 5 5
162 – 209 10 10 NO NO
210 – 244 5 5 NO NO
Booklets with cover
Weight Max no. of paper in fold & staple/trimming model in 200 gsm cover (Sheets)
Normal paper Fine paper Coated paper Long grain paper
Color paper
50 – 64 49+1 49+1 29+1 29+1
65 – 81 49+1 49+1 29+1 29+1
82 – 91 29+1 29+1 14+1 14+1
92 – 130 19+1 19+1 9+1 9+1
131 – 161 14+1 14+1 4+1 4+1
*1 When paper weight included within one copy of finished booklet vary, the heaviest one is applicable.

SD-513 - BOOKLET MAKING UNIT


Type Saddle stitch unit that lays folded paper
Modes Saddle stitching mode, saddle stitching trimming mode, multi half-fold mode,
multi half-fold trimming mode, multi tri-folding mode, straight mode, sub tray mode
Saddle stitch mode
Function Exit to saddle stitch tray after fold & stitch process
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, Wide paper Custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, high quality, color specific, coated
Media weight 62 – 300 gsm
Staple page See also page 34/35 for a complete overview of paper types, paper weights and covers.
Staple position At position of ½ of paper length (default)
Adjustable up to +/- 20 mm by user
(paper sizes within 165 – 296 mm)
Tray capacity 2 – 10 stapled sheets: 30 sets or more
41 – 50 stapled sheets: 10 sets or more
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 33

Trimming mode
Function Front trim of booklet
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, Wide paper, Custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, High Quality, Color Specific, Coated
Media weight 62 – 300 gsm
Max sheets for trim 50 sheets (80 gsm) x 2 = 100 sheets
Trim length 5 – 40 mm (booklet length more than 120 mm)
Trim position Fore edge (opposite of stitching)
Trim trash box capacity 1,700 sheets of trimming
Multisheet half fold mode
Function Exit to saddle stitch tray after folding 1 or more sheets
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, Wide paper, Custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, High Quality, Color Specific, Coated
Media weight 62 – 300 gsm
Max. multiple sheets 62 – 81 gsm 5 sheets
82 – 130 gsm: 3 sheets
131 – 300 gsm: 2 sheets
Tray Capacity 30 sets (5 sheets)
Multisheet letter fold-in mode
Function Exit to 3-fold tray after 3-folding 1 or more sheets
Media format A4S
Media weight 62 – 91 gsm
Max. multiple sheets 62 – 81 gsm 5 sheets
82 – 91 gsm: 3 sheets
with CR-101 80 – 216 gsm: 1 sheet
Tray Capacity Folding sheets Number of sets
1 sheet folding 40 sets
2 sheets folding 20 sets
3 sheets folding 13 sets
4 sheets folding 10 sets
5 sheets folding 8 sets
Sub tray mode
Function Exit to sub tray without process
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, Wide paper, Custom size paper
Min. 100 x 140 mm
Max. 330 x 487 mm
Media type Standard paper, Fine Paper, Coated Paper, Recycle paper
Media weight 62 – 350 gsm
Tray Capacity 200 sheets
Z-fold: 20 sheets / Center fold: 20 sheets
Creasing: 100 sheets (300 gsm or less) / 50 sheets (301 gsm or more)
Other specifications
Dimension (W x H x D) 1.241 x 1.020 x 1.431 mm
Width with booklet tray 1,477 mm
Weight Approx. 337 kg (Front console 181 kg; Rear console 156 kg
Power Source Power supply embedded
Power Consumption Less than 350 W
Durability 50 million or 5 years
Finishing operation 25 million (2,5 million sets with 10 sheets)
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 34

Booklets without cover


Weight Max no. of paper in fold & staple/SQF/trimming model *1 (Sheets) Accuracy of 4-stitch stapling
position guaranteed *5 (Sheets)
Normal paper Fine paper Coated paper Long grain Paper with a Normal paper Coated paper
Color paper paper width of under Fine paper Color paper
182 mm
62 – 80 35 35 30 30 16 35 12 – 30
81 – 91 30 30 15 30 *2 16 11 – 30 11 – 15
92 – 135 20 20 10 10 *2 8 9 – 20 9 – 10
136 – 176 15 15 5 5 4 7 – 15 NO
177 – 216 10 10 NO NO NO 6 – 10 NO
217 – 256 5 5 NO NO NO 4–5 NO
257 – 300 3 3 NO NO NO 3 NO
Booklets with 3 different cover types
Weight Max no. of paper in fold & staple/SQF/trimming model *1*3*4 (Sheets) Accuracy of 4-stitch stapling
position guaranteed *5 (Sheets)
Normal paper Fine paper Coated paper Long grain Paper with a Normal paper Coated paper
Color paper paper width of under Fine paper Color paper
182 mm
62 – 80 30 + C1 30 + C1 29 + C1 29 + C1 15 + C1/2/3 12 – 30 + C1 12 – 29 + C1
25 + C2/3 *4 25 + C2/3 *4 24 + C2/3 *4 C2 & C3 NO 11 – 25 + C2/3 11– 24 + C2/C3
81 – 91 29 + C1 29 + C1 14 + C1/2 29 + C1 *2 15 + C1/2/3 11 – 29 + C1 11 – 14 + C1
24 + C2/3 24 + C2/3 9 + C3 C2 & C3 NO 10 – 24 + C2/3 10 – 14 + C2
8 – 9 + C3
92 – 135 19 + C1/2 19 + C1/2 9 + C1/2 9 + C1 *2 7 + C1 9 – 19 + C1 9 + C1
14 + C3 14 + C3 4 + C3 C2 & C3 NO 3 + C2/3 8 – 19 + C2 8 – 9 + C2
8 – 14 + C3 C3 NO
136 – 176 14 + C1/2 14 + C1/2 4 + C1/2 4 + C1 3 + C1/2/3 7 – 14 + C1 NO
9 + C3 9 + C3 C3 NO C2 & C3 NO 6 – 14 + C2
6 – 9 + C3
177 – 216 9 + C1/2 9 + C1/2 NO NO NO 6 – 9 + C1 NO
4 + C3 4 + C3 5 – 9 + C2
4 + C3
217 – 256 4 + C1/2 4 + C1/2 NO NO NO 4 + C1 NO
3 + C3 3 + C3 3 – 4 + C2
3 + C3
257 – 300 2 + C1/2/3 2 + C1/2/3 NO NO NO 2 + C1/2 NO
2 + C3
C1 – Covers from 50 – 216 gsm
C2 – Covers from 217 – 256 gsm
C3 – Covers from 257 – 300 gsm

* 1 When paper weight included within one copy of finished booklet vary, the heaviest one is applicable.
* 2 When numbers in multiple cells in one row do not match, the smallest one is applicable.
* 3 For cover of SQF, 217 gsm and above are categorized as ‘Not guaranteed’.
* 4 For cover + 1 sheet of body, A3 or larger with a weight of 74 gsm or less is categorized as ‘Not guaranteed’.
* 5 Performance guarantee of 4-stitch stapling complies with ‘Max no. of paper in Fold & Staple/SQF/Trimming model’
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 35

FD-504 SPINE CORNER FORMING UNIT


Type Spine corner forming unit
Modes Spine corner forming (flat back) of booklets
Compatibility SD-513
Spine corner forming
Function Exit to saddle stitch tray after spine corner forming
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, wide paper, custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, high quality, color specific, coated
Media weight 64 – 216 gsm
Number of sheets per set Approximately 1.5 sec per booklet depending on thickness
Dimensions (W x H x D) 643 x 258 x 157mm ( built in SD-513)
Weight 13 kg
Power source Supplied from SD-513
Power consumption 60 W or less

CR-101 CREASING UNIT


Type Creasing Unit
Modes Saddle stitch/Half-fold+Crease, Tri-fold + Crease, Perfect Binder+Crease, Free Crease
Compatibility SD-513
Creasing mode (for Saddle Stitch, Perfect Binding & Free Crease)
Function Creasing and processing in SD or PB or output of creased sheets
1 sheet is creased at a time
Selectable between 1 to 4 creases
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, wide paper, custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, high quality, color specific, coated
Media weight 80 – 300 gsm* (For saddle stitch 300 gsm for perfect binding 216 gsm)
*Depends on the function that is combined with creasing
Minimum distance between crease 1 mm
Number of creases 1-4 (limited according to mode)
Dimensions (W x H x D) 211 x 460 x 137 (built in SD-513)
Weight 6.8 kg
Power source Supplied from SD-513
Power consumption 25 W or less
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 36

TU-503 SLITTING UNIT


Type Trimming unit
Modes Slitting (Top and bottom cutting of sheet) and processing in SD or PB or output of slitted sheets
Compatibility SD-513
Slitter mode
Media format SRA3, A3, B4, ISOB4, SRA4S, A4S, B5S, ISOB5S, wide paper, custom size paper
Min. 120 x 257 mm
Max. 330 x 487 mm
Media type Plain, High Quality, Color Specific, Coated
Output size after trimming Min 120 mm (125 – 2.5 x 2)
Output size after trimming Max. 326 mm (331 – 2.5 x 2)
Media weight 80 – 300 gsm (depending on mode)
Cut amount 5 to 26 mm top and/or bottom (difference between top and bottom amount ≤10 mm)
Dimensions (W x H x D) 304 x 630 x 381 (built in SD-513)
Weight 18.7 kg
Power source Supplied from SD-513
Power consumption 50W or less

PB-503 – PERFECT BINDING UNIT


Type Inline perfect binder using hot-melt glue technology and automated cover
sheet trimming
Modes Book binding mode, sub tray mode
Book binding mode
Function Binding a book and placing it on the stacker
Content pages
Media format A4, B5, A5, A5S, ISOB5
Min. 139 x 139 mm
Max. 307 x 221 mm
Z-fold A3, B4, A4S, ISOB4
Media type Plain, recycled, high-quality, colour, matt-coated
Media weight 62 – 105 gsm
Cover pages
Media format Vertical: same size as the inside paper (main scan direction)
Horizontal: wide size = 2 x inside paper size in sub scan direction + spine
thickness (max. = 30 mm) + 5 mm for trimming, e.g. A4 book = 2 x 210 +
30 + 5 = 455 mm
Min. 139 x 279 mm
Max. 307 x 472 mm
Media type High-quality, coated paper
Media weight 81 – 216 gsm
Paper grain direction Cover & book pages: parallel to book spine
No. of sheets for book binding Min.: 10 sheets
Max.: 300 sheets or 30 mm (colour paper or matt-coated paper: 150 sheets
or 15 mm). In case of Z-fold insertions, restrictions apply for number of
Z-fold sheets and total number of sheets.
Cover tray capacity 1,000 sheets (82 gsm)
500 sheets (216 gsm)
Book tray capacity Max.: 11 x 30 mm thick books in a row; 2 rows available; equals
about 6,600 sheets
To prevent stacking problems, capacity is limited by book thickness:
10 – 30 sheet booklet: 50 pc.
31 – 150 sheet booklet: 35 pc. or limit detector
151 – 300 sheet booklet: limit detector
Warm-up time About 20 minutes
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 37

Supply of glue
Type Hot-melt type
Hopper capacity Approx. 1 kg*
* Equivalent of approx. 110 books or approx. 33,000 sheets
(Glue thickness 1.0 mm and 30.0 mm book thickness of A4 size)
Sub tray mode
Function Exit paper without treatment on the sub tray
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, postcard-S, SRA3, SRA4,
SRA4S, ISOB5, ISOB5S, ISOB4, custom size paper, standard tab paper
Min. 100 x 148 mm
Max. 330 x 487 mm
Media weight 62 – 300 gsm
Tray capacity 200 sheets (80 gsm)
Other specifications
Dimensions (W x H x D) 1,360 x 1,223 x 775 mm
Weight 270 kg
Power source From main body
Power consumption 1,000 W or less
Durability 50 million or 5 years

FS-532 – STAPLING UNIT


Type 100-sheet staple finisher, with inline clinch and staple cut
Modes Straight exit mode, offset mode, staple and sub staple mode, sub tray mode
Offset group/Offset sort mode
Function Exit paper without treatment on the main tray
Media format Big: A3, B4, SRA3, SRA4, SRA4S, ISOB4
Small: A4, A4S, B5, B5S, 16KS, ISOB5, ISOB5S
Minimum: A5, A5S, B6S
Min. 100 x 148 mm
Max. 324 x 483 mm
Media type Plain, Fine, Colour, Coated, PrePrinted, Book/News, Envelope, Embossed,
Tab Paper
Media weight 62 – 300 gsm
Tray capacity Printing direction Paper weight Sheets
length
320 mm or longer 80 gsm 2,000
(A3, B4, 11 x 17)
250 to 319 mm 80 gsm 4,200
(A4, B5, 8.5 x 17)
249 mm or shorter 80 gsm 750
(A5, 5.5 x 8.5)
Staple mode Staple mode 182 – 364 mm Except the left
2–9 150 75
10 – 20 50 50
21 – 30 30 30
31 – 40 25 25
41 – 50 20 20
51 – 60 15 15
61 – 100 10 10
Staple capability Please see next page
Staple capability 1 in the back (parallel/45 degrees), 1 in the front (parallel), 2 in the centre
pitch (pitch: 120 mm, 140 mm and 165 mm)
Storage capacity for cut staple needles 150,000 or more
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 38

Sub tray mode


Function Exit paper without treatment on the sub tray
Media format A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, postcard-S, SRA3, SRA4,
SRA4S, ISOB5, ISOB5S, ISOB4, custom paper sizes, standard tab paper
Min. 100 x 148 mm
Max. 324 x 483 mm
Media type All engines supported
Media weight 62 – 350 gsm
Other specifications
Dimensions (W x H x D) 544 x 1,070 x 723 mm (excl. main tray)
Width incl. main tray (retracted): 798 mm
Weight Approx. 74 kg
Power source From main body
Power consumption 144 W or less
Durability 50 million or 5 years
FS-532 – STAPLE CAPABILITY
Number of staple sheets
Plain Fine Plain paper/except fine
Media weight Less than 400 mm or 320 mm or less 321 to 399 mm 400 mm or Less than 400 400 mm or
400 mm more more mm more
62 – 74 gsm 100 50 50 20 – 35 35
75 – 80 gsm 100 50 30 30 30 35 35
81 – 91 gsm 60 50 30 30 30 35 35
92 – 135 gsm 50 50 30 30 30 30 30
136 – 162 gsm 40 40 30 30 30 25 25
163 – 216 gsm 25 25 25 25 25 20 20
217 – 244 gsm 25 25 25 25 25 15 15
245 – 300 gsm 10 10 10 10 10 10 10
301 – 350 gsm – – – – – – –
Staple limitation is based on the number of sheets in one set or thickness of one set, whichever is reached first. Max. thickness of one set:
– Paper length 219 mm or less: 23 mm or less
– Paper length 220 mm or more: 20 mm or less

PK-522 – PUNCH KIT


Type 2/4 holes (selectable)
Compatibility FS-532
Media format 2 holes A3, B4, A4, A4S, B5, B5S, A5, A5S, SRA4S
Media format 4 holes A3, B4, A4, B5
Media type Plain, Fine, Colour, Coated, PrePrinted, Book/News, Embossed
Unable to punch: Label, Tab Paper, OHP, Punched Paper
Media weight 62 – 300 gsm
Hole diameter 2 holes: 6.5 mm/80 mm hole pitch
4 holes: 6.5 mm/80 mm hole pitch
Adjustment -/+ 5.0 mm
Dimensions (W x H x D) 156 x 180 x 592 mm
Weight Approx. 4.5 kg
Power source From main body
Power consumption Less than 30 W
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 39

PI-502 – POST INSERTER


Type Post insert tray (2 trays)
Compatibility FS-532
Upper tray
Media format A4, A4S, B5, B5S, A5, custom paper sizes
Min. 182 x 148 mm
Max. 314 x 297 mm
Media weight 62 – 200 gsm
Tray capacity 200 sheets or 30 mm height
Lower tray
Media format SRA3, A3, B4, A4, A4S, B5, B5S, A5, SRA4S, custom paper sizes
Min. 182 x 148 mm
Max. 314 x 458 mm
Media weight 62 – 200 gsm
Tray capacity 200 sheets or 30 mm height
Dimensions (W x H x D) 511 x 220 x 620 mm
Weight Approx. 10.5 kg
Power source From main body
Power consumption 30 W or less

SD-510 – SADDLE STITCHING KIT


Type Saddle stitching kit for FS-532
Compatibility FS-532
Modes Saddle stitch mode, multi-sheet half-fold mode, multi-sheet letter fold-in
mode, sub tray mode
Saddle stitch mode
Function Exit to saddle stitch tray after fold & stitch process
Media format A3, B4, A4S, custom paper sizes
Min. 100 x 148 mm
Max. 330 x 487 mm
Media type Plain, Fine, Colour, Coated, PrePrinted, Book/News, Embossed
Media weight Inside paper: 62 – 216 gsm
Cover paper: 62 – 300 gsm
Staple page 62 – 80 gsm: 20 sheets
81 – 91 gsm: 16 sheets
92 – 216 gsm: 5 sheets
217 – 244 gsm: cover only
245 – 300 gsm: cover only
1 sheet of 50 to 216 gsm paper is treated as 1 sheet
1 sheet of more than 217 gsm paper is treated as 5 sheets
Staple position Changeable (60 – 148.5)
Tray capacity 2 – 5 stapled sheets: 35 sets or more
6 – 10 stapled sheets: 23 sets or more
11 – 20 stapled sheets: 15 sets or more
20 – 25 stapled sheets: 15 sets or more
Tray capacity FS-532 main tray 320 mm or longer (A3, B4, 11 x 17): 2,000 sheets
250 – 319 mm (A4, B5, 8.5 x 17): 3,000 sheets
249 mm or shorter (A5, 5.5 x 8.5): 750 sheets
(Paper weight 72 – 81 gsm)
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 40

Multi-sheet half-fold mode


Function Exit to saddle stitch tray after folding 1 or more sheets
Media format A3, B4, A4S, custom paper sizes
Min. 100 x 148 mm
Max. 330 x 487 mm
Media weight 62 – 216 gsm
Max. multiple sheets 62 – 216 gsm: 1 – 5 sheets
217– 300 gsm: 1 sheet
Tray capacity 35 sets (1–5 sheets)
Multi-sheet letter fold-in mode
Function Exit to tri-fold tray after tri-folding 1 or more sheets
Media format A4S
Media weight 62 – 105 gsm
Max. multiple sheets 62 – 91 gsm: 3 sheets
92 – 105 gsm: 1 sheet
Tray capacity 50 sets (1 sheet); 40 sets (2 sheets); 30 sets (3 sheets)
Other specifications
Dimensions (W x H x D) 281 x 530 x 597 mm (installed within FS-532)
Weight Approx. 22.6 kg (excl. output tray) (output tray: 3.8 kg)
Power consumption 40 W or less

OT-510 – OPEN STACKER


Paper Size 95 x 133~331 x 488 mm
(Envelope: Width 90 mm~ With MK-740: Max.1200 mm)
Paper Weight 62 – 350 gsm
Media type Plain, Fine, Colour, Coated, PrePrinted, Book/News,
Envelope, Embossed, Tab Paper , (Banner with MK-740)
Stacking Mode Sort/Group
Tray capacity Printing direction length Paper weight Sheets
320 mm or longer (A3, B4, 11 x 17) 80 gsm 2,000
250 to 319 mm (A4, B5, 8.5 x 17) 80 gsm 4,200
249 mm or shorter (A5, 5.5 x 8.5) 80 gsm 750
Power From Mainbody
Size (WxDxH) 844 x 723 x 1020 mm
Weight Approx. 55 kg

OT-511 – OUTPUT TRAY


Paper Size Lenght: 139 – 463 mm
Width: 95 – 324 mm
Paper Weight 62 – 350 gsm
Tray capacity 150 sheets (80 gsm)
Power From Mainbody
Size (WxDxH) 456 x 230 x 364 mm (When the Tray is extended)
Weight approx. 7.9 kg
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 41

GBC PUNCH G2
Type Multi punching unit
Modes Bypass mode, punch mode and double punch mode
By pass mode
Function By pass mode
Min. 100 x 148 mm
Max. 330 x 487 mm
Media weight 62 – 350 gsm (16 lb bond – 130 lb cover)
Punch mode / Double punch mode
Function Punch mode / Double punch mode
Media format A4, A5, A3, SRA4, SRA3, 8.5x11, 9x12, 5.5x8.5, 11x14, 11x17, 12x18
Clear cover format 7 mil (unprinted)
Tab media format A4 - 5,10 tabs A5 – 3,5 tabs
Media type Plain, coated, tab paper
Media weight Plain : 75 – 300 gsm
Coated : 120 – 300 gsm
Sheet size tolerance ± 0.75mm
Punch precision Hole size: ± 2% or less
Position: ± 0.5 mm or less
Burr: ± 0.3 mm or less
Skew: ± 0.6 mm or less
Power performance Offset: ± 2 mm or less
Speed change: ± 2%
Punch trash capacity 20,000 cycles (PB die) until 100,000 cycles (4H die)
depending on die used
Other Specifications
Options 15 different dies
Dimensions (W x D x H) 445 x 775 x 1020 mm
Weight Approx. 95 kg
Power consumption Less then 440 W
Power source 230V / 50Hz
Punch misfeed rate 1 in 20,000 (uncoated 75 gsm)
Bypass misfeed rate 1 in 65,000 (uncoated 75 gsm)
Recommended monthly punch volume 300,000 cycles
Maximum monthly punch volume 400,000 cycles
Through pass 60 million or 5 years
Punching operation 20 million
DIE SETS
Weight Approx. 3 kg
Durability 750,000 sheets (punching 75gsm when lubricated)
Media format A4, A5, A3, SRA4, SRA3,
For Plastic Comb Binding
DIE SET CombBind 20-21 Hole

For Twin Loop™ Binding


DIE SET Wire 2:1, Square

DIE SET Wire 3:1, Square


TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 42

DIE SET Wire 2:1, Rnd 34 Hole

DIE SET Wire 3:1, Rnd 23 Hole

For Color Coil™ Binding


DIE SET Coil, Rnd 44/47 Hole

DIE SET Coil, Oval 44/47 Hole

For Velo® Bind


DIE SET VeloBind, 12 Hole, A4

For Color Coil™ Binding


DIE SET 2/4 Hole, 8 mm

DIE SET 2/4 Hole, 6.5 mm

DIE SET 2/4 Hole Scan

For GBC Binder G1 Binding


DIE SET eWire, Round tbd
DIE SET eWire, Square tbd

WATKISS POWERSQUARE™ 224KR


Type Saddle stitch unit
Modes Saddle stitch mode, Trimming mode, Squarefold mode
Saddle stitch mode (online)
Function Exit to saddle stitch tray after fold & stitch process
Media format Min.: 200 x 200 mm
Max.: 324 x 483 mm
Media weight 60 – 250 gsm
Staple page Minimum set thickness: 1 sheet (when folded makes an 4 page leaflet)
Maximum finished book thickness: up to 10.4 mm (approx 208 pages
80 gsm, 224 pages 70 gsm), dependent on paper type and quality
Maximum set thickness: up to 5.2 mm (approx 52 sheets 80 gsm,
56 sheets 70 gsm), dependent
Staple position & amount changeable from 1 – 6 stitches
Tray capacity 35 booklets (20 sheets of A4 80 gsm bond paper, with 2 stitches)
Optional book stacker: 930 mm
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATION GUIDE 43

Front trimming mode


Function Front Trimming of booklet
Media format Min.: 200 x 200 mm
Max.: 324 x 483 mm
Media weight 60 – 250 gsm
Max. trim 28 mm
Min. trimmed book size 78 mm
Trim position 1 edge (opposite to saddle)
Squarefold mode
Function Flattening the spine of the booklet
Media format Min.: 200 x 200 mm
Max.: 324 x 483 mm
Media weight 60 – 250 gsm
Side trimming mode
Function Front trimming of booklet
Media format Min.: 200 x 200 mm
Max.: 324 x 483 mm
Max. trim 40 mm from each side
Media weight 60 – 250 gsm
Other specifications
Dimension (W x H x D) 3,270 x 1,560 x 1,840 mm
Weight Approx. 690 kg
Power Source Power supply embedded
Power Consumption 500 W
Durability None (can be refurbished)

PLOCKMATIC SD-350 / SD-500


Type Inline Booklet Maker system
Modes Booklet maker module, Cover feeder module, Square Fold Module, Square
Fold Module, Trimmer module, Rotate Crease Trim Module (RCT)
Booklet maker module
Function Center fold
Input/Output sheets 1 – 50 sheets Stapled (For the 50 sheet version – SD-500)
1 – 35 sheets Stapled (For the 35 sheet version – SD-350)
1 – 2 sheets Non stapled folding (more than 2 sheet folding without staple
is not recommended)
Min. 206* x 275 mm (* For sheet sizes smaller than 209 mm set registration
may show limited performance)
Max. 320 x 457.2 mm
Media weight 64 – 300 gsm
Dimension (W x H x D) 1420 x 970 x 700 mm
Weight Approx. 155 kg
Power consumption 250 W
Power Source 100 – 240 V / 50 – 60 Hz
TECHNICAL SPECIFICATIONS CUSTOMER EXPECTATIONS GUIDE 44

Cover feeder module


Function Cover feeder and post Inserter functions
Cover feeder capacity 20 mm (approx. 200 sheets of 80 gsm paper)
Min. 206 x 275 mm
Max. 320 x 457.2 mm
Media weight 64 – 250 gsm
Dimensions (W x D x H) 310 x 190 x 530 mm
Weight Approx. 8 kg
Power consumption Included in Booklet Maker margin
Square fold module
Function Flattening the spine of the booklet
Input/Output sheets 1 –50 sheets
Min. 206* x 275 mm (* For sheet sizes smaller than 209 mm set registration
may show limited performance)
Max. 320 x 457.2 mm
Media weight 64 – 300 gsm
Dimensions (W x D x H) 360 x 900 x 620 mm
Weight Approx. 53 kg
Power consumption Included in Booklet Maker
Trimmer module
Function Front trimming
Input/Output sheets 1– 50 sheets
Min. 206* x 275 mm (* For sheet sizes smaller than 209 mm set registration
may show limited performance)
Max. 320 x 457.2 mm
Minimum/Maximum trimming 1 – 25 mm - Adjustable in 0.5 mm steps
Default trim length 4.5 mm - Adjustable in 0.1 mm steps
Dimension (W x H x D) 360 x 900 x 620 mm
Weight Approx. 71 kg
Power consumption Included in Booklet Maker margin
Rotate crease trim module (RCT)
Function Front Trimming of booklet
Input/Output sheets 1 – 50 sheets
Min. 206* x 275 mm (* For sheet sizes smaller than 209 mm set registration
may show limited performance)
Max. 320 x 457.2 mm
Minimum/Maximum trimming 5 mm – 30 mm (from each side of each sheet)
Crease two crease tools one fine tool for paper below 120 gsm and one coarse
tool for paper above 120 gsm
Dimensions (W x D x H) 700 x 1000 x 620 mm
Weight Approx. 218 kg
Power consumption 250 W
Power source 100 – 240 V / 50 – 60 Hz
AGREEMENT CUSTOMER EXPECTATION GUIDE 45

AGREEMENT
Additional agreements, special considerations or performance limitations agreed between Konica Minolta and the customer:

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

I have reviewed and I understand the product specifications for the configuration that will be installed in my company.
(please sign here):

Konica Minolta Sales Representative ________________________________________________________________________________

Konica Minolta Analyst Representative ______________________________________________________________________________

Konica Minolta Service Representative _______________________________________________________________________________

The image quality of a representative output sample from the AccurioPress C3080/C3080P/C3070 (attached to this
document) is representative of the print quality acceptable to my organisation

Date _________________________________________ Customer’s signature __________________________________________


NOTES CUSTOMER EXPECTATIONS GUIDE 46

NOTES
NOTES CUSTOMER EXPECTATION GUIDE 47
Your Konica Minolta Business Solutions Partner:

Konica Minolta
Business Solutions Europe GmbH
Europaallee 17
30855 Langenhagen Germany
Tel.: +49 (0) 511 74 04-0
Fax: +49 (0) 511 74 10 50
12/2017

www.konicaminolta.eu

You might also like