Class 600 Cast Carbon Steel Globe Valve

Bolted bonnet, Outside screw-and-yoke, Rising stem and handwheel, Swivel disc. Fig End Connections
RF-flanged with smooth
D Gear Operation 600 SCJ
finish on gasket surface.
for 4’’ to 12’’
Hammer-blow W600 SCJ Butt-welding ends.
D H Type Handwheel
for 3’’

Standard materials of parts

Parts Materials
Body ASTM A216 Gr.WCB
Bonnet ASTM A216 Gr.WCB
Stem ASTM A276 Tp.403
ASTM A182 Gr.F6a (2’’ ~ 4’’)
L1 L2 Disc ASTM A105 + 13Cr (6’’ ~ 10’’)
ASTM A216 Gr.WCB + 13Cr (12’’ only)
600 SCJ Buttwelding End
Lock nut ASTM A182 Gr.F6a
Dimensions Body seat ring ASTM A182 Gr.F6a
Gland ASTM A182 Gr.F6a
in 2 21/2 3 4 6 8 10 12
Valve Size Gland packing See Page 7.
mm 50 65 80 100 150 200 250 300
Gland flange ASTM A105
in 11.50 13.00 14.00 17.00 22.00 26.00 31.00 33.00 Handwheel Ductile iron
L1
mm 292 330 356 432 559 660 787 838 Gasket See Page 7.
in 11.50 13.00 14.00 17.00 22.00 26.00 31.00 33.00 Bonnet bolt / nut ASTM A193 Gr.B7/A194 Gr.2H
L2
mm 292 330 356 432 559 660 787 838 Gland bolt / nut ASTM A576 Gr.1045/A194 Gr.2H
in 15.7 18.7 19.9 34.5 38.1 45.9 52.0 62.2 Bonnet bush ASTM A182 Gr.F6a
H Yoke ASTM A216 Gr.WCB
mm 400 475 506 877 967 1165 1320 1580
Collar ASTM A182 Gr.F6a
in 9.8 11.8 13.8 19.7 19.7 23.6 23.6 24.0
D Note: Refer to Page 2 & 3 for standard
mm 250 300 350 500 500 600 600 610 seat material and construction.

Class 900 Cast Carbon Steel Globe Valve

Bolted bonnet, Outside screw-and-yoke, Rising stem and handwheel, Swivel disc. Fig End Connections
RF-flanged with smooth
900 SCJS
D finish on gasket surface.
900 SCJS
W900 SCJS Butt-welding ends.
All Gear Operation

Standard materials of parts

Parts Materials
Body ASTM A216 Gr.WCB
Bonnet ASTM A216 Gr.WCB
L2 Stem ASTM A276 Tp.403
L
ASTM A182 Gr.F6a (3’’ & 4’’)
Buttwelding End Disc ASTM A105 + 13Cr (6’’ & 8’’)
Dimensions
Lock nut ASTM A182 Gr.F6a
in 3 4 6 8
Valve Size Gland ASTM A182 Gr.F6a
mm 80 100 150 200
Gland packing See Page 7.
in 15.00 18.00 24.00 29.00 Gland flange ASTM A105
L1
mm 381 457 610 737 Gasket See Page 7.
in 15.00 18.00 24.00 29.00 Bonnet bolt / nut ASTM A193 Gr.B7/A194 Gr.2H
L2
mm 381 457 610 737 Gland bolt / nut ASTM A576 Gr.1045/A194 Gr.2H
in 34.6 36.7 46.1 53.0 Bonnet bush ASTM A182 Gr.F6a
H Yoke ASTM A216 Gr.WCB
mm 880 933 1171 1345
Collar ASTM A182 Gr.F6a
in 19.7 19.7 23.6 23.6
D Note: Refer to Page 2 & 3 for standard
mm 500 500 600 600 seat material and construction.

16
 KITZ Corporation of America

Figure Number Construction

CAST CARBON and LOW ALLOY STEEL

G- W 1500 SC L S P 6C Y -N
1 2 3 4 5 6a 7 8 6b 9

1 OPERATION 7 BONNET CONNECTION

( ) Handwheel ( ) Bolted Bonnet
G- Gear operator P Pressure Seal
E- Electric
8 SHELL MATERIALS
2 END CONNECTION ( ) A216 GR. WCB std, WCC must specify
( ) RFF, 125~250 AARH * 1C A217 Gr. WC1
K RFF, 250~500 AARH 5C A217 Gr. C5
R Ring Joint ‡ 6C A217 Gr. WC6
W Butt Weld 9C A217 Gr. WC9
12C A217 Gr. C12
3 PRESSURE CLASS (ANSI/ASME) BL A352 Gr. LCB
150 CL A352 Gr. LCC
300 1L A352 Gr. LC1
600 2L A352 Gr. LC2
900 3L A352 Gr. LC3
1500
2500 9 OTHERS
Bore Schedules: sch-std, sch-40….,
4 MATERIAL CLASSIFICATION -N NACE MR103-2003 ‡
SC - Generic for all Cast Steel -Q Special User Requirements i.e. NDE, Trims,
Packing and Gaskets, Cleaning, others ‡
5 VALVE TYPE
L Gate SPECIAL
J Globe M- Prefix used for Valves modified through
O Check QMS by KCA ‡

6 TRIMS EXAMPLES
6a ( ) 13 Cr. 150SCL
S_ ½ HF/Seal Welded Seat Ring ** 150SCLS-N
6b _B ½ HF/Threaded Seat Ring G-300SCLSMM
_D ½ HF Disc w/ Threaded Seat Ring 300SCLSBLMMY
_MM 316 SS ‡ 600SCLS5CY
_NN Monel ‡ 900SCLS12CY-Q
_A20 Alloy 20 ‡ R1500SCLS
_Y Full HF w/ Threaded Seat Rings W1500SCLSP6CY
S_Y Full HF w/ Seal Welded Seat Rings †

( ) Blank – No designation required

* KCA Standard RF
** KCA Standard for A216 & A352 materials
† KCA Standard for Chrome (A217) materials
‡ Fig. No. designation utilized by KCA only

H/tech: FigNo Construction SC