Intelligent Assembly Solutions

20 kHz
Model 220
PRESS/THRUSTER

FEATURES
• Narrow 4.5" (114mm) profile for close center-to-
center distances in multihead and automation
• Chrome-plated column and titanium booster are
installations
standard
• Rugged construction using the highest quality
components provides superior performance, preci- • High-performance Magnum™ transducer is standard
sion, and reliability • Internally mounted optional linear encoder saves
space in multihead and automated installations
• Compact, single-rail linear ball slide assembly
system offers accurate positioning, stable movement, • Remote pneumatics availability offers increased
and friction-free resistance flexibility in system integration
• D ual pressure increases clamp force to improve melt • OSHA-required lockout for air supply is standard
during the weld cycle, or to provide tighter assembly
during the hold cycle
• Ergonomic base and cycle activation switches
reduce operator fatigue
• Optional hydraulic slow speed available for precise, • Status indicators in base for Power, In Cycle, and
repeatable control of horn travel during the weld cycle Abort clearly communicate system conditions
• 7" (178mm) stroke with mechanical bottom stop • Twist-release emergency stop switch meets interna-
adjustable in .001" (.025mm) increments tional safety standards
• Top-of-stroke limit switch for automation application • Press/thruster design provides system flexibility and
upgradeability, reducing equipment investment
• All controls are accessible from the front for
convenient set-up and operation • Compatible with all current Dukane assembly
system components
• Easy to use front panel position indicators with
universal icons instantly show settings of position and • Press/thruster can be used with 20 kHz Dynamic
bottom stop, and optional slow speed, pre-trigger, Process Controllers™ in 500, 1200, 1700, 2200, and
and end-of-weld switches 3300 watt power levels

www.dukcorp.com/us • e-mail: ussales@dukcorp.com

Dukane Corporation • Ultrasonics Division • 2900 Dukane Drive • St. Charles, Illinois 60174 USA • TEL (630) 797-4900 • FAX (630) 797-4949
 SPECIFICATIONS
Options
HYDRAULIC SPEED CONTROL precision hydraulic 4' (1219mm) chrome column increases part load area
control of the melt velocity. Critical to achieve maxi- height by 12 inches
mum weld strength in staking, inserting and shear joint
applications. 1.50” (38mm), or 2.00” (51mm) and 3.00" (76mm)
air cylinder
LINEAR OPTICAL ENCODER Ability to weld by
collapse and absolute distance through out 7 inches of PROGRAMMABLE pressure profiling and force by
stroke with .0005 of an inch resolution. (requires interface with electronic pressure regulator, pressure
DPC III or IV Plus w/ distance module) transducer, and load cell press options offer increased
control, repeatability, and consistency
PRE-TRIGGER and END-of-WELD LIMIT SWITCHES
Pre-trigger provides ability to initiate weld (sonics on) OPTICAL cycle activation switches
phase of the cycle prior to contacting part. Great for
staking applications. End of weld provides ability to
weld to predetermined position in the stroke, simple
absolute distance.

16.38
1.88 (416) 6.00 RAD
9.20 3.50 DIA. COL. (152.4)
(48) 4.48 (234) (89) 10mm TAP 12.38
(114) 2 Holes (314)

3.50 RAD
(88.9)
10mm
TAP
4 Holes

13.25
(337)
18.58
(472)

31.34
(796)
39.68
(1008)
20.88
0.50 (530) 4.92 RAD
(13) (125.0))
CL 56.94 DIA 24.83 10mm TAP 2 Holes
(1450) HOLES (631)
OF HORN
& PRESS
Base
12.38
(314) Pneumatic requirements: 80-110 psi max.
19.5 MAX
(495) 8.50
clean, dry air
LESS HORN (216)
Maximum available clamp pressure: 540
4.74 lbs @ 110 psi with standard 2.50"
(120)
(63.5mm) air cylinder
18.58 24.83
(472) (631) Allow 5.00" (130mm) behind the press/
Side thruster for air line and cable connections
Front

Thruster Dimensions Press Dimensions

Housing height: 31.34" (796mm) Base width: 18.58" (472mm)
Housing width: 4.48" (114mm) Base depth: 24.83" (631mm)
Housing depth: 10.00" (254mm) at Column height: 39.00" (991mm)
greatest point Column diameter: 3.50" (89mm)
Weight: 45.00 lbs (20Kg) Maximum height: 56.94" (1450mm)
Housing width: 4.48" (114mm)
Column C.L. to
Horn C.L.: 12.38" (314mm)
Useable throat: 8.50" (216mm)
Stroke: 7.00" (178mm)
Weight: 170.00 lbs (77Kg)

Note: All specifications are subject to change without notice. Please consult Dukane Ultrasonics for any updated information. Form No. 11056-C-04