Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Aux Pump

    Uploaded by

    Mahesh Kumar
    8 views3 pages

    Original Title

    AUX PUMP

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    8 views3 pages

    Aux Pump

    Uploaded by

    Mahesh Kumar

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 87) - Systems ...

    Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product: GAS ENGINE


    Model: G3516 GAS ENGINE 4EK03629
    Configuration: G3516 Engine Electronic Ignition System 4EK00001-UP

    Specifications
    G3500 Engines
    Media Number -SENR6411-17 Publication Date -01/04/2014 Date Updated -22/04/2014

    i06177664

    Auxiliary Water Pump


    SM CS - 1371

    S/N - 4EK1-UP

    S/N - 4WD1-UP

    S/N - 5JD1-UP

    S/N - 7NJ1-UP

    S/N - 8BZ1-UP

    S/N - 8JZ1-UP

    S/N - 8LD1-UP

    S/N - 9TG1-UP

    S/N - CPG1-UP

    S/N - CPJ1-UP

    S/N - CPY1-UP

    S/N - CRN1-UP

    S/N - CSP1-UP

    S/N - CSZ1-UP

    S/N - ZAZ1-UP

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 28/09/2023
    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 87) - Systems ... Page 2 of 3

    Illustration 1 g03838200

    Table 1
    Specification for the 424-3629 Auxiliary Water Pump Gp and 9Y-8175 Auxiliary Water
    Pump Gp
    I tem Qty Part Specification Description
    430-9695 Width of groove in the shaft for thrust washer is 6.25 ± 0.05 mm
    A 1
    Shaft (0.246 ± 0.002 inch).
    423-0938
    Thickness of the new thrust washer is 6.120 ± 0.025 mm
    B 2 Thrust
    (0.2409 ± 0.0010 inch).
    Washer
    Bore in the bushing for auxiliary drive shaft is 75.000 ± 0.055 mm
    C - -
    (2.9528 ± 0.0022 inch).
    Bore diameter of the impeller is 19.000 ± 0.013 mm
    212-8183 (0.7480 ± 0.0005 inch).
    D 1
    Impeller Diameter of shaft over impeller end is 19.050 to 19.060 mm
    (0.7500 to 0.7504 inch).
    127-5400 Installation depth of the bushing in the housing assembly is
    E 1
    Bushing 1.5 ± 0.5 mm (0.06 ± 0.02 inch).
    9X-4594 Lip
    1 1 Do not lubricate the sealing lip of the lip type seal.
    Type Seal

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 28/09/2023
    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 87) - Systems ... Page 3 of 3

    3 - - Lubricate the shaft with a thin film of clean engine oil before
    pressing the impeller (2) onto the shaft. The end of the shaft must be
    flush with the face of the impeller within ± 0.15 mm (± 0.006 inch).
    235-3546 O-
    4 1 Lubricate the bore lightly with 5P-3975 Rubber Lubricant.
    Ring Seal
    9M -3786 O- Lubricate the bore of the O-ring seal with clean engine oil, glycerin,
    5 1
    Ring Seal or clean water.

    Copyright 1993 - 2023 Caterpillar Inc. Thu Sep 28 15:03:10 UTC+0100 2023
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 28/09/2023

    You might also like