Pig Popper Brochure
Pig Popper Brochure
Pig Popper Brochure
The
-2-
TEST LOG
Enduro has designed and built a test vessel especially for the testing of our pig signal devices. The vessel
presently tests our Pig Popper model: PSBD-1 units at pressure from 0 to 2,100 psi. A pneumatic plunger
resets the pig signal each time a pig simulator passes and triggers the pig signal probe.
The following charts indicate the number of cycles (pig passes) and the operating pressure maintained during
the specific testing.
The life of the Pig Popper test is the additive cycle period of each test combined.
The mechanical testing of the Pig Popper is equivalent to approximately 18 years with no failure.
! Terminated test after 6,600 cycles with a full range of psi levels having been met.
! Simulate pig passage in test vessel with mechanical pig passage and pneumatic reset.
! Further testing of the Pig Popper is constantly taking place.
! To date, the unit has exceeded all expectations and has proven sound engineering and
material selections.
! Additional models, such as a lighted version and control panel electrical units are also
available.
-3-
ENDURO Pig Popper
Specifications
Materials:
Upper Housing Nylon, Black
Housing Cap Nylon, Black
Indicator Urethane, Yellow
-4-