Eichenberber English

EichenbergerGewinde
100 % Swiss made
Main Catalogue
Carry ball screws
Carry Speed-line high-helix ball screws
Speedy high-helix lead screws
Rondo round thread lead screws
The choice is yours
Thread rolling is the core expertise of

Eichenberger Gewinde AG. Not surpris-
ingly, the Company utilizes this process to
form the thread profiles of all the screws it
makes. Thread rolling (often also referred
to as thread milling) is the cold forming Advantages of thread rolling:
of the surface of round workpieces. The – significant increase in hardness through
thread form is produced by causing a ra- cold forming
dial dynamic force to be exerted between – excellent surface smoothness on thread
the two rotating rolling dies that form the flanks and in ground radius
workpiece. As the roll die profile penetrates – reduced notch sensitivity
the workpiece surface, the material in cold – no interrupted swalfe as in machine-
state is pressed all the way down into the ground threads
root diameter of the thread roll die and – excellent dimensional accuracy
is therefore rolled according to nominal – rational manufacturing process Even though all Eichenberger lead screws
value. – extremely cost-effective especially in are made using the rational thread rolling
large production batches process, individual model series feature
distinct differences in design and perform-
ance. Product characteristics therefore
need to be considered when selecting the
right product.
Basic differences are shown in the

summary description (opposite).
2 © Eichenberger Gewinde AG – V 09 02 28
Summary description
ball screws
Due to their premium quality and preci- – ø 4–32 mm

sion, the rolled Carry ball screws are – p 1–25 mm
often an ideal substitute for expensive, – for high loads at
machine-ground screws. In general, they medium moving speeds
are suitable for all linear applications
where heavy loads need to be transferred
with optimum efficiency. pages 4/5 and 6–27
high-helix ball screws
The cold-rolled, wear-resistant Carry Speed- – ø 8–25 mm

line are marked by an extremely high helix. – p 10–50 mm
They provide for high moving speeds and – for medium loads at
deliver an efficiency which is nothing short high moving speeds
of impressive.
pages 4/5 and 28–35
high-helix lead screws
The innovative Speedy high-helix lead – ø 5–36 mm

screws with helix up to 6 x diameter pro- – p 5–200 mm
vide for maximum moving speeds at low – for low loads at
rotational speeds or efficient conversion of high moving speeds
linear to rotary movements. – slide screw unit
pages 36/37 and 38–59
round thread lead screws
The alternative to trapezoidal screws with – ø 6–16 mm

remarkable efficiency. – p 2–5 mm
– for medium loads at
medium moving speeds
– slide screw unit
pages 36/37 and 60–64
Contract work: pages 65/66
About the Company: Eichenberger Gewinde AG page 67
© Eichenberger Gewinde AG – V 09 02 28 3
4
type FBE ZYE FBR FBI FGR FGI ZYR ZYI type
pages pages
 = standard range
32/33 30/31 20/21 18/19 14–17 12/13 10/11 8/9
d0 x p d0 x p
n n
Ball screw product range
4x1 4x1
5x2 l n 5x2
5x3 l 5x3
6x1 n n 6x1
l = ECONOMY range
6x2 l 2) 6x2
Carry and Carry Speed-line ball screws

8x1 n n 8x1
2)
8 x 1.5 l n 8 x 1.5
8x2 n n l l n n 8x2
8 x 2.5 l l n 8 x 2.5
8x3 l n 8x3
8x8 l 8x8
8 x 12 n n 8 x 12
10 x 2 l l 2) n 2) 10 x 2
= also available with left-hand thread
10 x 3 l 2) n 2) 10 x 3
10 x 10 n l n 10 x 10
12 x 2 n l 2) n 2) 12 x 2
12 x 3 n 12 x 3
© Eichenberger Gewinde AG – V 09 02 28
12 x 4 n l l n 12 x 4
12 x 5 n n l 2) l 12 x 5
12.7 x 12.7 l 12.7 x 12.7
12.7 x 25.4 n n 12.7 x 25.4
14 x 2 n l 14 x 2
14 x 4 n 2) l 2) l n 2) n 14 x 4
16 x 2 n l l 2) 16 x 2
16 x 5 n 2) l l 2) n 2) 16 x 5
16 x 10 n n n l n 16 x 10
16 x 16 n n 16 x 16
16 x 50 n n 16 x 50
20 x 5 n 2) l 2) n 2) 20 x 5
20 x 10 n l 20 x 10
20 x 20 n n n l 20 x 20
25 x 5 n l n 25 x 5
25 x 10 n l 25 x 10
25 x 25 n n n l 25 x 25
32 x 5 n l n 32 x 5
32 x 10 n l 32 x 10
type FBE ZYE FBR FBI FGR FGI ZYR ZYI type
pages 32/33 30/31 20/21 18/19 14–17 12/13 10/11 8/9 pages
5
Carry and Carry Speed-line ball screws
Content Carry
ball screws
– Order system Carry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

– Carry type «ZYI»: cylindrical single nut with single-thread ball return . . . . . . . . . 8/9
– Carry type «ZYR»: cylindrical single nut with tube type ball return . . . . . . . . . 10/11
– Carry type «FGI»: nut with mounting thread and single-thread ball return . . . . 12/13
– Carry type «FGR»: nut with mounting thread and tube type ball return . . . . . . 14–17
– Carry type «FBI»: flange type B single nut with single-thread ball return. . . . . . 18/19
– Carry type «FBR»: flange type B single nut with tube type ball return. . . . . . . . 20/21
– Basic design / Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
– Ball returns / Precision / Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
– Factory length / Ball screw ends / Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
– Design fundamentals
…at dynamic loads:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25/26
- «Suitability test» rotational speed characteristics
- critical rotational speed
- nominal service life
- average axial load / average rotational speed
- efficiency
- driving torque / required power
…at static loads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
- permissible maximum load
- permissible buckling force
Visit www.gewinde.ch for the latest on existing and/or new products.
Carry ball screws

Order system Carry
Example for complete ball screw KGT 16x5 FGR RH 1 S 350 G7 A O M
Type of lead screw

KGT = Carry ball screw
Nominal size (d0 x p) [mm]
Type of nut for nut only
ZYI = cylindrical single nut with single-thread ball return

ZYR = cylindrical single nut with tube type ball return
FGI = nut with mounting thread and single-thread ball return
FGR = nut with mounting thread and tube type ball return
FBI = flange type B single nut with single-thread ball return
FBR = flange type B single nut with tube type ball return
MSX = special design according to drawing
Right-hand / left-hand thread

RH = right-hand thread (standard)
LH = left-hand thread (➞ see dimensional charts)
Number of ball circulations for nut only
1 = 1 ball circulation
2 = 2 ball circulations
Wiper (Seal) for nut only
S = with wipers (plastic or brushes)

N = without wipers
Ball screw overall length [mm] for screw only
Lead accuracy (class) for screw only
G9 = ≤ 0.1 mm/300 mm (standard)

G7 = ≤ 0.052 mm/300 mm (on special request)
G5 = ≤ 0.023 mm/300 mm (on special request)
Backlash for nut only
A = standard backlash (see dimensional charts)

R = reduced backlash upon specification
Screw end machining for screw only
O = no end machining (cut by grinding, hardened ends; nut on mounting tube)

E = end machining according to drawing
Assembly
G = screw and nut separate
M = screw and nut assembled according to drawing/specified orientation
Example for screw only KGT 16x5 RH 350 G7 O G
Example for nut only KGT 16x5 FGR RH 1 S A G
Carry ball screws

Carry type «ZYI»
Cylindrical single nut with single-thread ball return
Legend
d0 = nominal screw diameter [mm]
d1 = outside screw diameter [mm]
d2 = core diameter [mm]
p = pitch [mm]
i = number of ball circulations [–]
S = lubrication hole (position not defined) [mm]
SA = wipers
K = plastic
B = brushes
T = standard backlash [mm]
3)
= only on request
Warning! Note when selecting a ball screw that the maximum rotational speed
depends on the system’s rotational speed characteristics.
See page 25 for the appropriate calculations.
Special designs available on request.

All specifications are subject to change without notice.
Quality management ISO 9001:2008
Carry ball screws

Carry type «ZYI»
Carry Dimensions Load rates

type «ZYI» Screw Nut
d0 x p d1 d2 D1 Ln L3 i b t S SA T Cdyn Cstat
g6 P9
mm mm mm N
right-hand threads
4x1 4.0 3.2 8 10 — 3x1 ø2 1.0 — — 0.03 430 580
5x2 5.0 4.0 10 14 8 3x1 2 1.0 — — 0.03 500 800
6x1 6.0 5.0 12 14 8 3x1 2 1.0 — — 0.03 600 1 000
8x1 8.0 7.0 14 14 8 3x1 2 1.2 — — 0.03 700 1 200
8 x 1.5 8.0 6.7 14 14 8 3x1 2 1.2 — — 0.04 800 1 300
8x2 8.0 6.5 16 20 8 3x1 2 1.2 — — 0.05 1 400 2 000
8x3 8.0 6.7 14 12 8 2x1 2 1.2 — — 0.05 950 1 500
10 x 2 9.7 8.2 18 14 10 2x1 3 1.2 — — 0.06 1 250 2 100
12 x 2 12.0 10.6 20 15 10 2x1 3 1.2 — — 0.06 1 380 2 500
14 x 4 14.0 11.5 25 24 10 3x1 4 2.5 — — 0.07 3 900 6 650
14 x 4 14.0 11.5 25 32 10 3x1 4 2.5 ø4 K 0.07 3 900 6 650
16 x 5 15.7 13.0 30 43 16 3x1 4 2.5 M5 K 0.07 9 700 22 000
20 x 5 19.2 16.5 33 45 20 3x1 4 2.5 M5 K 0.07 10 800 25 000
25 x 5 24.6 21.5 38 50 20 3x1 4 2.5 M5 K 0.07 11 700 30 000
32 x 5 31.6 28.5 48 48 20 4x1 5 3.0 M5 K 0.07 19 000 54 000
left-hand threads
10 x 2 3) 9.7 8.2 18 14 10 2x1 3 1.2 — — 0.06 1 250 2 100
12 x 2 3)
12.0 10.6 20 15 10 2x1 3 1.2 — — 0.06 1 380 2 500
16 x 5 15.7 13.0 30 43 16 3x1 4 2.5 M5 K 0.07 9 700 22 000
20 x 5 19.2 16.5 33 45 20 3x1 4 2.5 M5 K 0.07 10 800 25 000
The CAD data corresponding to the types shown above are available at www.gewinde.ch
Carry ball screws

Carry type «ZYR»
Cylindrical single nut with tube type ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request

Carry ball screws

Carry type «ZYR»

type «ZYR» Screw Nut
g6 P9
mm mm mm N
right-hand threads
8x2 8.0 6.5 18 14 8 1x3.5 2 1.2 — — 0.06 2 000 3 200
8 x 2.5 8.0 6.6 18 16 10 1x3.5 3 2.0 — — 0.06 2 000 3 200
10 x 3 9.9 7.8 22 24 10 1x3.5 3 2.0 — — 0.06 2 800 5 000
10 x 3 9.9 7.8 22 24 10 1x3.5 3 2.0 ø 3.5 K 0.06 2 800 5 000
10 x 10 9.8 7.9 23 26 10 2x1.5 3 2.0 — — 0.06 2 500 4 500
12 x 4 12.0 9.8 26 24 10 1x3.5 3 1.8 — — 0.07 5 500 11 000
12 x 4 12.0 9.8 26 32 10 1x3.5 3 1.8 ø4 K 0.07 5 500 11 000
14 x 4 14.0 11.5 29 24 16 1x3.5 4 2.5 — — 0.07 8 100 16 000
14 x 4 14.0 11.5 29 32 16 1x3.5 4 2.5 ø4 K 0.07 8 100 16 000
16 x 10 15.7 13.0 32 45 16 2x2.5 4 2.5 — — 0.07 17 000 25 000
16 x 10 15.7 13.0 32 45 16 2x2.5 4 2.5 ø4 K 0.07 17 000 25 000
left-hand threads
10 x 3 9.9 7.8 22 24 10 1x3.5 3 2.0 — — 0.06 2 800 5 000
10 x 3 9.9 7.8 22 24 10 1x3.5 3 2.0 ø 3.5 K 0.06 2 800 5 000
14 x 4 14.0 11.5 29 24 16 1x3.5 4 2.5 — — 0.07 8 100 16 000
14 x 4 14.0 11.5 29 32 16 1x3.5 4 2.5 ø4 K 0.07 8 100 16 000
Carry ball screws

Carry type «FGI»
Nut with mounting thread and single-thread ball return
Legend
p = pitch [mm]
B = pin wrench hole (position not defined) [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request

Carry ball screws

Carry type «FGI»
Ln
+ 0,5
L2 B 0
– 0,1
0
d1
d2
M
D1
S

type «FGI» Screw Nut
d0 x p d1 d2 D1 M Ln L2 i B S SA T Cdyn Cstat
0/–0.1 +0.5/0
mm mm mm N
right-hand threads
5x2 5.0 4.0 10 M8x0.75 18 6 3x1 2.5 — — 0.03 500 800
5x3 5.0 4.2 10 M8x0.75 19 6 2x1 2.5 — — 0.03 340 490
8 x 1.5 8.0 6.7 16 M14x1 22 8 3x1 2.5 — — 0.04 800 1 300
8x2 8.0 6.5 16 M14x1 28 8 3x1 2.5 — — 0.05 1 400 2 000
8 x 2.5 8.0 6.6 16 M14x1 24 8 3x1 2.5 — — 0.05 1 400 2 100
8x3 8.0 6.7 16 M14x1 22 8 2x1 2.5 — — 0.05 950 1 500
10 x 2 9.7 8.2 18 M16x1 22 8 2x1 2.5 — — 0.06 1 250 2 100
12 x 2 12.0 10.6 20 M18x1 23 8 2x1 2.5 — — 0.06 1 380 2 500
12 x 4 12.0 9.8 24 M20x1 39 10 3x1 2.5 ø4 K 0.07 4 000 6 800
12 x 5 12.0 9.5 23 M20x1 42 10 3x1 3.0 ø4 K 0.07 5 000 8 600
14 x 4 14.0 11.5 25 M22x1.5 34 10 3x1 2.5 — — 0.07 3 900 6 650
14 x 4 14.0 11.5 25 M22x1.5 38 10 3x1 2.5 ø4 K 0.07 3 900 6 650
16 x 5 15.7 13.0 30.2 M26x1.5 45 12 3x1 3.5 — — 0.07 9 700 22 000
16 x 5 15.7 13.0 30.2 M26x1.5 50 12 3x1 3.5 M5 K 0.07 9 700 22 000
20 x 5 19.2 16.5 33 M30x1.5 47 12 3x1 4 M5 K 0.07 10 800 25 000
25 x 5 24.6 21.5 40 M38x1.5 57 12 3x1 4 M5 K 0.07 11 700 30 000
32 x 5 31.6 28.5 52 M48x1.5 55 15 4x1 4 M5 K 0.07 19 000 54 000
left-hand threads
10 x 2 3) 9.7 8.2 18 M16x1 22 8 2x1 2.5 — — 0.06 1 250 2 100
12 x 2 3)
12.0 10.6 20 M18x1 23 8 2x1 2.5 — — 0.06 1 380 2 500
16 x 2 16.0 14.5 25.0 M22x1.5 34 10 3x1 2.5 — — 0.05 2 400 5 200
16 x 5 3)
15.7 13.0 30.2 M26x1.5 50 12 3x1 3.5 M5 K 0.07 9 700 22 000
20 x 5 19.2 16.5 33 M30x1.5 47 12 3x1 4 M5 K 0,07 10 800 25 000
Carry ball screws

Carry type «FGR»
Nut with mounting thread and tube type ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request

Carry ball screws

Carry type «FGR» (1/2)
Ln
+ 0,5
L2 B 0
– 0,1
0
d1
d2
M
D1
S

type «FGR» Screw Nut
0/–0.1 +0.5/0
mm mm mm N
right-hand threads
6x2 5.7 4.6 16 M12x1 22 8 1x3.5 2.5 — — 0.06 1 700 2 300
8x2 8.0 6.5 18 M14x1 24 8 1x3.5 2.5 — — 0.06 2 000 3 200
8x2 8.0 6.5 18 M14x1 24 8 1x3.5 2.5 ø2 K 0.06 2 000 3 200
8 x 2.5 8.0 6.6 17.5 M15x1 24 8 1x3.5 2.5 — — 0.06 2 000 3 200
8x8 8.0 6.6 18 M14x1 25 8 2x1.5 2.5 — — 0.06 1 500 2 500
10 x 2 9.7 8.2 19.5 M17x1 22 7 1x3.5 2.5 — — 0.06 2 300 4 000
10 x 2 9.7 8.2 19.5 M17x1 22 7 1x3.5 2.5 ø2 K 0.06 2 300 4 000
10 x 3 9.9 7.8 21 M18x1 29 9 1x3.5 3 — — 0.06 2 800 5 000
10 x 3 9.9 7.8 21 M18x1 29 9 1x3.5 3 ø2 K 0.06 2 800 5 000
10 x 10 9.8 7.9 23 M18x1 35 9 2x1.5 3 — — 0.06 2 500 4 500
10 x 10 9.8 7.9 23 M18x1 35 9 2x1.5 3 ø4 K 0.06 2 500 4 500
12 x 4 12.0 9.8 26 M20x1 32 8 1x3.5 2.5 — — 0.07 5 500 11 000
12 x 4 12.0 9.8 26 M20x1 34 10 1x3.5 2.5 ø4 K 0.07 5 500 11 000
12 x 5 12.0 9.5 26 M20x1 37 8 1x3.5 3 — — 0.07 6 600 12 000
12 x 5 12.0 9.5 26 M20x1 37 8 1x3.5 3 ø4 K 0.07 6 600 12 000
12.7 x 12.7 13.1 10.3 29.5 M25x1.5 50 12 2x1.5 3 — — 0.07 8 000 15 500
12.7 x 12.7 13.1 10.3 29.5 M25x1.5 50 12 2x1.5 3 M5 B 0.07 8 000 15 500
left-hand threads
6x2 5.7 4.6 16 M12x1 22 8 1x3.5 2.5 — — 0.06 1 700 2 300
10 x 3 9.9 7.8 21 M18x1 29 9 1x3.5 3 — — 0.06 2 800 5 000
10 x 3 9.9 7.8 21 M18x1 29 9 1x3.5 3 ø2 K 0.06 2 800 5 000
12 x 5 12.0 9.5 26 M20x1 37 8 1x3.5 3 — — 0.07 6 600 12 000
Carry ball screws

Carry type «FGR»
Nut with mounting thread and tube type ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request

Carry ball screws

Carry type «FGR» (2/2)
Ln
+ 0,5
L2 B 0
– 0,1
0
d1
d2
M
D1
S

type «FGR» Screw Nut
0/–0.1 +0.5/0
mm mm mm N
right-hand threads
14 x 2 14.0 12.5 26 M22x1.5 32 10 2x2.5 3 — — 0.06 4 500 10 000
14 x 2 14.0 12.5 26 M22x1.5 32 10 2x2.5 3 ø2 K 0.06 4 500 10 000
14 x 4 14.0 11.5 29 M22x1.5 32 8 1x3.5 3 — — 0.07 8 100 16 000
14 x 4 14.0 11.5 29 M22x1.5 38 10 1x3.5 3 ø4 K 0.07 8 100 16 000
16 x 2 16.0 14.5 30 M26x1.5 28 12 1x2.5 3.5 — — 0.06 2 500 5 500
16 x 2 16.0 14.5 30 M26x1.5 28 12 1x2.5 3.5 ø2 K 0.06 2 500 5 500
16 x 5 15.7 13.0 32 M26x1.5 42 12 1x3.5 4 — — 0.07 12 000 25 000
16 x 5 15.7 13.0 32 M26x1.5 47 12 1x3.5 4 M5 K 0.07 12 000 25 000
16 x 10 15.7 13.0 32 M26x1.5 47 12 1x2.5 4 — — 0.07 8 500 12 500
16 x 10 15.7 13.0 32 M26x1.5 52 12 1x2.5 4 ø4 K 0.07 8 500 12 500
16 x 10 15.7 13.0 32 M26x1.5 47 12 2x2.5 4 — — 0.07 17 000 25 000
16 x 10 15.7 13.0 32 M26x1.5 52 12 2x2.5 4 ø4 K 0.07 17 000 25 000
20 x 10 19.5 16.5 38 M35x1.5 58 19 2x2.5 4 — — 0.07 21 000 51 000
20 x 10 19.5 16.5 38 M35x1.5 58 19 2x2.5 4 ø4 B 0.07 21 000 51 000
20 x 20 20.0 16.5 38 M35x1.5 58 19 2x1.5 4 — — 0.07 10 000 22 000
25 x 10 24.8 21.8 43 M40x1.5 58 19 2x2.5 4 — — 0.07 21 000 54 000
25 x 10 24.8 21.8 43 M40x1.5 58 19 2x2.5 4 ø4 B 0.07 21 000 54 000
25 x 25 24.5 21.2 44 M40x1.5 72 20 2x1.5 4 ø4 B 0.08 10 000 24 000
25 x 25 24.5 21.2 44 M40x1.5 72 20 4x1.5 4 ø4 B 0.08 20 000 48 000
32 x 10 31.6 28.4 52 M48x1.5 62 19 2x2.5 4 ø4 B 0.07 20 000 55 000
left-hand threads
14 x 4 14.0 11.5 29 M22x1.5 32 8 1x3.5 3 — — 0.07 8100 16 000
14 x 4 14.0 11.5 29 M22x1,5 38 10 1x3,5 3 ø4 K 0,07 8100 16 000
Carry ball screws

Carry type «FBI»
Flange type B nut following DIN 69051 with single-thread ball return
Legend
p = pitch [mm]
S = lubrication hole [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request
4)
= special master gauge for holes; only 4 instead of 6 holes
(for d0 x p = 4 x 1, 6 x 1, 8 x 1, 8 x 2 and 12 x 5)

Carry ball screws

Carry type «FBI»
Special design flange nuts according

4)
to DIN 69051 on request: type «FA» type «FC» special master gauge for holes

type «FBI» Screw Nut
d0 x p d1 d2 D1 D2 D4 D5 D6 Ln L1 L7 L8 i S SA T Cdyn Cstat
g6 hole H13 h13 h13
circle
mm mm mm N
right-hand threads
4 x 1 4) 4.0 3.2 8 7.9 12 2.7 17 14 2 3 11 3x1 — — 0.03 430 580
6x1 4)
6.0 5.0 12 11.8 18 3.4 24 18 4 4 16 3x1 ø2 K 0.03 600 1 000
8 x 1 4) 8.0 7.0 14 13.5 21 3.4 27 18 4 4 18 3x1 ø2 K 0.03 700 1 200
8x2 4)
8.0 6.5 16 15.5 22 3.4 28 30 4 6 19 3x1 ø4 K 0.05 1 400 2 000
12 x 5 4) 12.0 9.5 24 23.5 32 4.5 40 40 6 8 26 3x1 ø4 K 0.07 5 000 8 600
16 x 5 15.7 13.0 28 27.8 38 5.5 48 45 6 10 40 3x1 M6 K 0.07 9 700 22 000
20 x 5 19.2 16.5 36 35.5 47 6.6 58 50 10 10 44 3x1 M6 K 0.07 10 800 25 000
25 x 5 24.6 21.5 40 39.5 51 6.6 62 50 10 10 48 3x1 M6 K 0.07 11 700 30 000
25 x 5 24.6 21.5 40 39.5 51 6.6 62 55 10 10 48 4x1 M6 K 0.07 14 000 35 000
32 x 5 31.6 28.5 50 49.5 65 9.0 80 57 10 12 62 4x1 M6 K 0.07 19 000 54 000
left-hand threads
16 x 5 3) 15.7 13.0 28 27.8 38 5.5 48 45 6 10 40 3x1 M6 K 0.07 9 700 22 000
20 x 5 19.2 16.5 36 35.5 47 6.6 58 50 10 10 44 3x1 M6 K 0.07 10 800 25 000
Carry ball screws

Carry type «FBR»
Flange type B nut following DIN 69051 with tube type ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
B = brushes
3)
= only on request
4)
(for d0 x p = 8 x 2, 10 x 10, 12 x 2, 12 x 3, 12 x 4 and 12 x 5)

Carry ball screws

Carry type «FBR»
Special design flange nuts according

4)
to DIN 69051 on request: type «FA» type «FC» special master gauge for holes

type «FBR» Screw Nut
d0 x p d1 d2 D1 D2 D4 D5 D6 Ln L1 L7 L8 i S SA T Cdyn Cstat
g6 hole H13 h13 h13
circle
mm mm mm N
right-hand threads
8 x 2 4) 8.0 6.5 18 17.5 22 3.4 28 25 4 6 19 1x3.5 ø4 K 0.06 2 000 3 200
10 x 10 4)
9.8 7.9 23 22.5 29 4.5 37 40 6 8 24 2x1.5 M5 K 0.06 2 500 4 500
12 x 2 4)
12.0 10.6 22 21.5 29 4.5 37 30 5 8 24 1x3.5 ø4 K 0.06 2 000 3 200
12 x 3 4)
12.3 10.2 24 23.5 26 4.5 40 36 5 8 26 2x2.5 — — 0.06 5 000 11 000
12 x 4 4)
12.0 9.8 26 25.5 32 4.5 39.5 36 5 8 28 1x3.5 M5 K 0.07 5 500 11 000
12 x 5 4) 12.0 9.5 26 25.5 32 4.5 39.5 40 5 7 28 1x3.5 M5 K 0.07 6 600 12 000
14 x 2 14.0 12.5 26 25.5 32 4.5 39.5 32 5 7 28 2x2.5 ø4 K 0.06 4 500 10 000
14 x 4 14.0 11.5 29 28.6 38 5.5 48 40 6 8 36 1x3.5 M5 K 0.07 8 100 16 000
16 x 2 16.0 14.5 30 29.5 38 5.5 48 45 6 10 40 2x2.5 M6 K 0.06 4 500 11 000
16 x 2 16.0 14.5 30 29.5 38 5.5 48 45 6 10 40 3x2.5 M6 K 0.06 6 000 15 000
16 x 10 15.7 13.0 32 31.5 43 6.6 54 52 6 12 44 2x2.5 M6 K 0.07 17 000 25 000
20 x 10 19.5 16.5 38 37.5 50 6.6 62 55 7 10 48 2x2.5 M6 B 0.07 21 000 51 000
20 x 20 20.0 16.5 36 35.5 47 6.6 58 58 7 10 44 2x1.5 M6 B 0.07 10 000 22 000
25 x 10 24.8 21.8 43 42.5 55 6.6 65 55 7 10 50 2x2.5 M6 B 0.07 21 000 54 000
25 x 25 24.5 21.2 44 43.5 56 6.6 70 67 10 12 52 2x1.5 M6 B 0.08 10 000 24 000
25 x 25 24.5 21.2 44 43.5 56 6.6 70 67 10 12 52 4x1.5 M6 B 0.08 20 000 48 000
32 x 10 31.6 28.4 52 51.5 67 9 82 62 10 12 64 2x2.5 M6 B 0.07 20 000 55 000
left-hand threads
14 x 4 14.0 11.5 29 28.6 38 5.5 48 40 6 8 36 1x3,5 M5 K 0,07 8 100 16 000
Carry ball screws

Basic design / Materials
Basic design / Materials Nut designs Materials

Standard are the following three types: Screws as well as nuts are made of hard-
Carry screws are manufactured by the ened steel. Stainless steel upon request
highly economical cold-rolling process (please ask for load rates).
which offers both significant cost savings
but also maintains a precision previously
often only available with machine-ground
screws. Carry screws are complemented
by a range of single steel nuts produced
in a special cost-cutting process.
Carry offers all the advantages of the inher-

ent ball screw design:
– high efficiency, i.e. Cylindrical single nut type «ZY…»
- low power input
- low self-heating
– low frictional, stick-slip-free running
– maximum wear resistance, i.e. very
good repetition accuracy with a
constant positioning precision.
– high reliability and durability.
Thread profile
Used most commonly are gothic arc Nut with mounting thread type «FG…»
(ogival) profiles.
Flange nut type «FB…»
Of course, any other nut designs (such as

those with integrated cardanic axis) are
available upon request.
Carry ball screws

Ball return / Precision / Lubrication
Ball return Lead accuracy Lubrication

Nuts feature single-thread ball returns or Eichenberger ball screws feature the fol- The usual specifications for lubricating
tube type ball returns, both fully integrated lowing lead accuracies according to DIN ball bearings also apply to ball screws.
into the nut shape. 69051: However, lubrication applied only once
but intended to last a lifetime is not suf-
Standard ficient in most cases. Regular lubrication
• G9 = ≤ 0,1 mm/300 mm is required to extend the service life of the
ball screw.
On request
• G7 = ≤ 0,052 mm/300 mm Please note:
• G5 = ≤ 0,023 mm/300 mm When shipped, screws simply have a pro-
tective film. Before mounting or operating
the ball screw, units must be lubricated with
the proper lubricant (through the lube hole
for nuts with wipers; directly onto the screw
for nuts without wipers).
Recommended all-purpose lubricant:

– Klüber Microlube GBU Y 131
Single-thread ball return, type «…I»
When using another lubricant, please
verify compatibility with anticorrosion
agent; otherwise rinse ball screw unit prior
to lubrication.
Caution: Do not use grease containing

Reduced backlash graphite or MoS.
Reduced backlash up to ≤ 0.01 mm is
available (only with paired or assembled
screws).
Efficiency
The efficiency η for Carry ball screws is
Tube type ball return, type «…R» better than 0.9.
Operating temperatures Wipers

Regular applications: –20 to +80 ° C. Plastic or brush wipers, depending on
Please ask about other operating tempera- nut type/dimension.
tures.
Carry ball screws

Factory length / Ball screw ends / Handling
Factory length Handling Assembling

In general, Eichenberger screws are Ball screws are precision parts and must
available as threaded rods, approx. 2.8 be protected from shock, dirt or moisture 1.
to 3 m long. Upon request, lengths up to when transported or stored. Please do not
6 m are available, depending on diameter unpack until ready for use.
and supply market situation.
Please check for cleanness when mounting Remove transport lock (O-ring) on one side.
the ball screw. Dirt or foreign matter on Please keep sleeve and nut in horizontal
Ball screw ends the ball race – especially inside the nut – position. Otherwise, the nut may slide
Ball screw ends are without any machining may cause increased wear and premature from the sleeve and balls may fall out of
cut by grinding (standard). failure. the ball race.
Upon request, a so-called standard screw In the event such incident does occur, balls
end journal with three turned bearing seats Please consult lubrication recommendation must be properly re-inserted to prevent
(see figure below) is available. Dimensions on page 23 before mounting or operating damage to or blockage of the ball screw.
are as per customer specifications. ball screws. If in doubt, please contact Eichenberger
Screws may also be ordered with softened Gewinde AG.
ends for subsequent finishing by the cus-
tomer or with an application-specific end Radial loads and torque
journal. Radial loads or torque brought to bear
In each instance, a detailed drawing would upon the nut result in overload of individual
be necessary. contact surfaces, thus seriously affecting 2.
the service life of the ball screw assembly.
Note also the links to the CAD data at Therefore it is important to properly mount
www.gewinde.ch the screw and to comply with all relevant
form and positional tolerances. Insert screw end into mounting sleeve.
Caution: Operator must be able to ad-

tightening thread keyway or
vance sleeve up to the thread intake.
D profile
Otherwise, balls may fall out of the ball
race and damage or block the unit.
3 turned bearing seats

up to quality 6 3.
surface up to Ra 0,8 µm
Gently turn nut onto the screw.
recess for circlip
Carry ball screws

Design fundamentals
The following are the relevant calculations Calculations at dynamic load:

which underly screw design and safe
operation. Critical rotational speed nper Nominal service life L10 or L h
( )
Cdyn 3
For detailed information on ball screw Permissible rotational speeds must dif- L10 = –––– · 106 [R]
Fm
design, please refer to DIN 69051. fer substantially from the screw’s own
frequency. L10
L h = ––––––– [h]
nm · 60
d2
nper = KD · 106 · —— · Sn [min-1]
la2
L10 = service life in revolutions [R]
Lh = service life in hours [h]
nper = permissible rotational speed [min ]-1
Cdyn = dynamic load [N]
«Suitability test» KD = characteristic constant as a function Fm = average axial load [N]
rotational speed characteristics of bearing configuration [–] F1…n = load per cycle unit [N]
➞ see below nm = average rotational speed [min-1]
When selecting a ball screw it is important d2 = core diameter [mm] n1…n = rotational speed per cycle unit [min-1]
to first ensure that the correct nut design for la = bearing distances [mm] q1…n = cycles [%]
the ball return system required to support ➞ see below 100 = ∑q (sum of cycles q1…n) [%]
the maximum rotational speed demanded (always include maximum allow-
by the application is used (independet of able la in calculation)
the screw length). Sn = safety factor Average axial load Fm
usually Sn = 0,5…0,8 [–] at constant rotational speed nconst
The maximum rotational speed is based on and dynamic load Cdyn
the system’s rotational speed characteristics
and the outside screw diameter: Configuration 1: la q1 q2 q3
fixed – Fm = 3 F13 ––– + F23 ––– + F33 ––– +… [N]
100 100 100
fixed
rotational speed characteristic
nmax = –––––––––––––––––––——– [min-1] KD = 276
d1
Configuration 2: F [N] F4
la
F1
nmax = maximum rotational speed [min ] -1
fixed –
Fm
simple F3
F2
Rotational speed characteristics [–] for KD = 190
– single-thread ball return: 60 000
(Carry «…I» types) Configuration 3: [%]
la q1 q2 q3 q4
– tube type ball return: 80 000 simple –
• q = 100 [%]
(Carry «…R» types) simple
– end cap ball return: 80 000 KD = 122
( )
(Carry Speed-line «…E» types) Cdyn 3
Configuration 4: la ➞ L10 = –––– · 106 [R]

Fm
d1 = outside screw diameter [mm] fixed – free
KD = 43 L10
➞ L h = –––––––– [h]
nconst · 60
Carry ball screws

Design fundamentals
Calculations at dynamic load (continuation):
Average rotational speed nm Efficiency η (theoretical) Driving torque M

at constant load Fconst Depends upon the type of power trans- Depends upon the type of power transmis-
and variable rotational speeds n1…n mission. sion.
Case 1: torque ➞ linear movement Case 1: torque ➞ linear movement

q1 q2 q3
nm = n1 ––– + n2 ––– + n3 ––– +… [min-1]
tan α Fa · p
100 100 100 η ≈ –––––––––– [–] Ma = ––––––––––– [Nm]
tan (α + ρ) 2000 · π · η
n [min-1] n4
n1
Case 2: axial force ➞ torque Case 2: axial force ➞ torque
nm
n3
n2 tan (α – ρ) Fa · p · η’
η’ ≈ –––––––––– [–] Me = –––––––––– [Nm]
tan α 2000 · π
[%]
q1 q2 q3 q4
whereby Ma = input torque [Nm], case 1
• q = 100 [%]
Me = output torque [Nm], case 2
p
tan α ≈ –––––– [–] Fa = axial force [N]
d0 · π
( )
Cdyn 3
➞ L10 = –––– · 106 [R]

Fconst
η = efficiency [%] Input performance P
L10 η’ = corrected efficiency [%]

Ma · n
➞ L h = ––––––– [h] p = pitch [mm] P = ––––––– [kW]
nm · 60 9550
ρ = angle of friction [°]
Average axial load Fm ➞ ρ = 0,30…0,60° P = input performance [kW]
at constant rotational speeds nconst n = rotational speed [min-1]
and dynamic load Cdyn
Efficiency ηp (practical) A safety margin of 20 % is recommended
q1 q2 q3 The efficiency η for Carry ball screws is when selecting drives.

Fm = 3 F13 ––– + F23 ––– + F33 ––– +… [N] better than 0.9.
100 100 100
q1 q2 q3
nm = n1 ––– + n2 ––– + n3 ––– +… [min-1]
100 100 100
( )
Cdyn 3
➞ L10 = –––– · 106 [R]

Fm
L10
➞ L h = ––––––– [h]
nm · 60
Carry ball screws

Design fundamentals
Calculations at static load:
Permissible maximum load Fper. Permissible buckling force FB
Cstat KB d24
Fper. = —— [N] FB = ––– · –––– · 103 [N]
fs SB lF2
Cstat = static load [N] KB = characteristic constant of load

fs = operating coefficient (depends on design) [–]
➞ normal operation: 1…2 [–] ➞ see below
➞ shock load: 2…3 [–] d2 = nominal screw diameter [mm]
lF = force-transferring length [mm]
SB = buckling safety factor
➞ gen. SB = 2…4 [–]
la
Case 1:
KB = 400
la
Case 2:
KB = 200
la
Case 3:
KB = 100
la
Case 4:
KB = 25
Carry ball screws

Content Carry Speed-line
– Order system Carry Speed-line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

– Carry Speed-line type «ZYE»: cylindrical nut with end cap ball return. . . . . . . 30/31
– Carry Speed-line type «FBE»: flange nut with end cap ball return. . . . . . . . . . 32/33
– Basic design / Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
– Ball return / Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
– Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Carry page 23
– Factory length / Ball screw ends / Handling /
Radial loads and torque / Assembling . . . . . . . . . . . . . . . . . . . see Carry page 24
– Design fundamentals. . . . . . . . . . . . . . . . . . . . . . . . . . . . see Carry pages 25–27

Order system Carry Speed-line
Example for complete ball screw KGE 16x50 FBE RH 3 S 450 G9 A O M
Type of lead screw

KGE = high-helix ball screw Carry Speed-line
ZYE = cylindrical nut with end cap ball return

FBE = flange nut with end cap ball return
(FSS, ZYK and FBK no more in the product range)

Number of ball circulations for nut only
Wipers for nut only
S = with wipers (plastic; integrated into end cap ball return)
Ball screw overall length [mm] for screw only

G7 = ≤ 0.052 mm/300 mm (on request; up to max. 1200 mm screw length)
G5 = ≤ 0.023 mm/300 mm (on request; up to max. 1200 mm screw length)
Backlash for nut only
A = standard backlash (see technical data)

R = reduced backlash upon specification
Screw end machining for screw only
O = no end machining (cut by grinding, hardened ends; nut on mounting tube)

Assembly
G = screw and nut separate
Example for screw only KGE 16x50 RH 450 G9 O G
Example for nut only KGE 16x50 FBE RH 3 S A G

Carry Speed-line type «ZYE»
Cylindrical nut with end cap ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
T = standard backlash


Carry Speed-line type «ZYE»
Carry S-line Dimensions Load rates

type «ZYE» Screw Nut
g6 P9
mm mm mm N
right-hand threads
8 x 12 8.0 6.7 18 28 8 2x1.5 2 1.2 ø2 K 0.05 1 400 2 300
12.7 x 25.4 12.5 10.6 26 32 10 3x0.9 3 1.8 ø4 K 0.05 2 300 4 500
16 x 10 16.0 13.4 28 42 16 2x2.9 4 2.5 ø4 K 0.07 12 500 26 000
16 x 16 15.5 13.2 28 42 16 2x1.9 4 2.5 ø3 K 0.07 7 800 15 500
16 x 50 16.0 13.2 28 55 16 3x0.9 4 2.5 ø4 K 0.06 4 800 11 000
20 x 20 20.0 17.3 36 50 20 4x1.9 4 2.5 ø4 K 0.06 17 900 44 600
25 x 25 24.5 21.2 40 60 20 4x1.9 4 2.5 ø4 K 0.06 23 300 68 000

Carry Speed-line type «FBE»
Flange nut with end cap ball return
Legend
p = pitch [mm]
SA = wipers
K = plastic
T = standard backlash
4)
(for d0 x p = 8 x 12 and 12.7 x 25.4)


Carry Speed-line type «FBE»
4)
special master gauge for holes
Carry S-line Dimensions Load rates

type «FBE» Screw Nut
d0 x p d1 d2 D1 D2 D4 D5 D6 Ln L1 L3 L7 L8 i S SA T Cdyn Cstat
g6 hole H13 h13 h13
circle
mm mm mm N
right-hand threads
8 x 12 4)
8.0 6.7 18 17.8 25 3.4 30 28 4 6 4 20 2x1.5 ø2 K 0.05 1 400 2 300
12.7 x 25.4 4)
12.5 10.6 26 25.5 33 4.5 42 32 5 7 8 28 3x0.9 ø4 K 0.05 2 300 4 500
16 x 10 16.0 13.4 28 27.8 38 5.5 48 42 10 10 10 40 2x2.9 ø4 K 0.07 12 500 26 000
16 x 16 15.5 13.2 28 27.8 38 5.5 48 42 10 10 10 40 2x1.9 ø4 K 0.07 7 800 15 500
16 x 50 16.0 13.2 28 27.8 38 5.5 48 55 10 10 10 40 3x0.9 ø4 K 0.06 4 800 11 000
20 x 20 20.0 17.3 36 35.5 47 6.6 58 50 10 10 12 44 4x1.9 M6 K 0.06 17 900 44 600
25 x 25 24.5 21.2 40 39.8 51 6.6 62 60 10 10 10 48 4x1.9 ø4 K 0.06 23 300 68 000

Basic design / Materials
Basic design / Materials Nut design Materials

The cold-rolled Carry Speed-line ball screw Standard are the following two types: Screws as well as nuts are made of hard-
features an extremely high pitch. Designed ened steel. Stainless steel upon request
to meet customer demand for a wear-free (please ask for load rates).
high-helix ball screw, it delivers a high Nut end caps with integrated ball returns
transmission speed and an impressive and wipers are made of plastic.
efficiency.
Ball screws of the Carry Speed-line are
the product of the very economical cold-
rolling process. They combine with single
steel nuts produced in a unique specially
developed process.
The design and production of this high-helix Cylindrical nut type «ZYE»
ball screw derive from our experience in
making the Carry and Speedy screws.
In other words, the Carry Speed-line
integrates the know-how of both technolo-
gies.
Carry Speed-line offers all the advantages

of the inherent ball screw design:
– high efficiency, i.e.
- low power input Flange nut type «FBE»
- low self-heating
– low frictional, stick-slip-free running Other nut designs are available upon
– maximum wear resistance, i.e. very request.
good repetition accuracy with a
constant positioning precision.
– high reliability and durability.
Thread profile
A gothic arc (ogival) profile is used.

Ball return / Precision
Ball return Lead accuracy Lubrication

Nuts feature end cap ball returns, fully Eichenberger high-helix ball screws feature See Carry page 23
integrated into the nut shape and serving the following lead accuracies according to
as wipers. DIN 69051:
Factory length
Standard Ball screw ends
• G9 = ≤ 0,1 mm/300 mm Handling
Radial loads and torque
On request Assembling
up to max. 1200 mm screw length See Carry page 24.
• G7 = ≤ 0,052 mm/300 mm
• G5 = ≤ 0,023 mm/300 mm
Design fundamentals
See Carry pages 25–27.
End cap ball return type «…E»
Operating temperatures
Regular applications: –20 to +80 ° C.
Please ask about other operating tem-
peratures.
Reduced backlash
Reduced backlash up to ≤ 0.01 mm
is available (only with paired or assembled
screws).
Efficiency
The efficiency η for this Carry Speed-line
is an impressive 0.95.
Wipers
Depending on construction Carry Speed-
line features integrated wipers as part of
the plastic end caps.

36
type round thread inch thread fine-pitch thread standard thread type
pages 62/63 54/55 52/53 40–51 pages
s = standard range
d0 / p0 d0 / p0
5/5 s 5/5
5 / 20 s 2) 5 / 20
6x2 s 6x2
6 / 25 s 6 / 25
6.35 / 6.35 s 6.35 / 6.35
6.35 / 12.7 s 6.35 / 12.7
6.35 / 25.4 s 6.35 / 25.4
s
Slide lead screw product range
7.5 / 7.5 7.5 / 7.5
7.94 / 12.7 s 7.94 / 12.7
8x2 s 8x2
8 / 10 s 2) 8 / 10
X = on request
8 / 12 s 8 / 12
8 / 15 s 8 / 15
8 / 30 s 2) 8 / 30
2)
9 / 20 s 9 / 20
9.7 / 25.4 s2) 9.7 / 25.4
10 x 3 s 10 x 3
10 / 10 s 10 / 10
10 / 12 s 2) 10 / 12
10 / 15 s 10 / 15
10 / 35 s 2) 10 / 35
10 / 50 s 2) 10 / 50
11 / 40 s 11 / 40
11 / 60 s 11 / 60
11.2 / 30.5 s 11.2 / 30.5
12 x 4 s 12 x 4
= also available with left-hand thread
12 / 15 s 2) 12 / 15
12 / 25 s 2) 12 / 25
Speedy high-helix lead screws and Rondo round thread lead screws
12 / 45 s 2) 12 / 45
12.5 / 12.5 X 12.5 / 12.5
12.8 / 35.6 s 12.8 / 35.6
13 / 20 s 13 / 20
13 / 70 s 2) 13 / 70
14 x 4 s 14 x 4
14 / 8 s 14 / 8
14 / 18 s 2) 14 / 18
14 / 30 s 2) 14 / 30
14.3 / 40.6 s 2) 14.3 / 40.6
15 / 20 s 2) 15 / 20
15 / 80 s 2) 15 / 80
16 x 5 s 16 x 5
16 / 21 s 2) 16 / 21
16 / 25 s 16 / 25
16 / 35 s 16 / 35
16.0 / 45.7 X 16.0 / 45.7

2)
16 / 90 s 16 / 90
17.6 / 50.8 s 17.6 / 50.8
18 / 16 s 18 / 16
18 / 24 s 2) 18 / 24
18 / 40 s 2) 18 / 40
2)
18 / 100 s 18 / 100
19 / 30 s 19 / 30
20 / 12 s 20 / 12
20 / 45 s 20 / 45
21 / 27 s 21 / 27
21 / 35 X 21 / 35
22 / 20 s 22 / 20
22 / 50 s 22 / 50
23 / 30 s 2) 23 / 30
24 / 40 X 24 / 40
24 / 55 s 24 / 55
2)
25.7 / 76.2 s 25.7 / 76.2
26 / 16 X 26 / 16
26 / 24 s 26 / 24
26 / 60 s 26 / 60
27 / 45 X 27 / 45
28 / 65 X 28 / 65
30 / 28 s 30 / 28
30 / 50 s 30 / 50
30 / 70 s 30 / 70
32 / 20 X 32 / 20
32 / 75 X 32 / 75
32.0 / 96.5 s 2) 32.0 / 96.5
34 / 32 X 34 / 32
34 / 80 s 34 / 80
36 / 200 s 36 / 200
type round thread inch thread fine-pitch thread standard thread type
37
Speedy high-helix lead screws and Rondo round thread lead screws
pages 62/63 54/55 52/53 40–51 pages
Content Speedy
high-helix lead screws
– Order system Speedy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

– Speedy with standard thread and standard flange nut
non-preloaded/preloaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40–51
– Speedy with fine-pitch thread and standard flange nut
non-preloaded/preloaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52/53
– Speedy with inch thread and standard flange nut
non-preloaded/preloaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54/55
– Basic design / Materials / Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
– Factory length / Handling / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
…at dynamic loads:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58/59
- efficiency
Basic calculations: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
- Maximum authorized load depending on speed

Order system Speedy
Example for complete high-helix lead screw SGS 18/100 SFM RH 350 G9 O M
Type of lead screw

SGS = High-helix lead screw Speedy
Nomina size (d0 / p0 ) [mm]
SFM = standard flange nut, non-preloaded, made of POM-C black 1)

SFV = standard flange nut, axial-preloaded, made of POM-C black 1)
SFT = standard flange nut, torsion-preloaded, made of EX100 white 6)
SBM = standard flange nut, non-preloaded, made of bronze
SBV = standard flange nut, axial-preloaded, made of bronze 3)
SBT = standard flange nut, torsion-preloaded, made of bronze 3)

LH = left-hand thread (➞ see dimensional charts)
Lead screw overall length [mm] for screw only
(stainless steel quality X20Cr13, Material N° 1.4021) 1)

GX = lead accuracy upon specification
End machining for screw only
O = no end machining (cut by grinding; screw and nut separate)

Assembly
G = screw and nut separate (standard)
1)
other materials on request
3)
only on request
6)
available for square pitches and larger (with electro polished screws)
Example for screw only SGS 18/100 RH 350 G9 O G
Example for nut only SGS 18/100 SFM RH G

Speedy with standard thread
Standard flange nut, non-preloaded/preloaded
Legend
p0 = nominal pitch [mm]
p = effective pitch [mm]
i = number of threads [–]
Cstat = static load rates for non-preloaded POM-C or preloaded EX100 nuts [N];
for higher load rates, bronze nuts must be used (Cstat bronze = 1.3 x Cstat POM/EX100)
non-preloaded B = bronze CuSn12, material N° 2.1052
3)
= only on request
6)
= not available with torsion-preload
torsion-preloaded


Speedy with standard thread (1/6)
axial-preloaded (POM-C black) non-

preloaded
(standard)
POM-C / Bronze
torsion-preloaded (EX100; if p0 ≥ d0)
Speedy Dimensions Load rates

Screw Nut
d0 / p0 d1 d2 p i D1 D2 D3 D4 D5 D6 L1 L2 L3 L4 Cstat
±0,05 h8 hole POM / B for POM/EX100
circle
mm mm mm N
right-hand threads
8 / 10 8.2 5.5 10 4 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 800
8 / 12 8.0 5.9 12 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 800
8 / 15 8.0 5.9 15 6 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 850
9 / 20 8.9 5.8 20 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 850
10 / 12 10.0 7.1 12 4 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 200
10 / 15 10.0 7.4 15 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 200
12 / 15 12.2 9.2 15 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 400
12 / 25 11.9 8.0 25 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 500
left-hand threads
8 / 10 8.2 5.5 10 4 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 800
10 / 12 10.0 7.1 12 4 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 200
12 / 15 12.2 9.2 15 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 400
12 / 25 11.9 8.0 25 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 500

Legend
3)
= only on request
6)
torsion-preloaded



preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
10 / 50 10.0 7.4 50 10 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 250
11 / 60 11.7 9.1 60 12 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 500
13 / 20 13.3 8.8 20 4 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 300
13 / 70 13.5 10.9 70 14 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 750
14 / 8 6)
14.0 9.8 8 2 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 900
14 / 18 14.3 11.4 18 6 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 600
14 / 30 13.9 10.1 30 6 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 750
left-hand threads
10 / 50 10.0 7.4 50 10 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 250
13 / 70 13.5 10.9 70 14 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 750
14 / 18 14.3 11.4 18 6 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 600
14 / 30 13.9 10.1 30 6 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 750

Legend
3)
= only on request
6)
torsion-preloaded



preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
15 / 20 15.2 12.5 20 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 600
15 / 80 15.2 12.6 80 16 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000
16 / 21 16.5 13.6 21 7 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 800
16 / 25 16.0 11.5 25 5 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 550
16 / 35 15.9 12.1 35 7 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000
16 / 90 17.0 14.3 90 18 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 250
18 / 16 18.0 14.3 16 4 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 100
18 / 24 18.7 15.7 24 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000
18 / 40 17.9 14.1 40 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 250
18 / 100 18.8 16.2 100 20 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 500
19 / 30 18.8 14.2 30 6 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 800
left-hand threads
15 / 20 15.2 12.5 20 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 600
15 / 80 15.2 12.6 80 16 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000
16 / 21 16.5 13.6 21 7 29.5 30 49 39 5.1 27 58 3 7 42 / 30 1 800
16 / 90 17.0 14.3 90 18 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 250
18 / 24 18.7 15.7 24 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000
18 / 40 17.9 14.1 40 8 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 250
18 / 100 18.8 16.2 100 20 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 500

Legend
3)
= only on request
6)
torsion-preloaded



preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
20 / 12 6) 20.0 15.8 12 3 35.5 36 59 47 6.2 33 64 5 8 46 / 32 1 200
20 / 45 20.0 16.1 45 9 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 500
21 / 27 20.8 17.9 27 9 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 200
21 / 35 3)
21.5 17.0 35 7 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 050
22 / 20 22.0 18.3 20 5 35.5 36 59 47 6.2 33 64 5 8 46 / 32 1 400
22 / 50 22.0 18.1 50 10 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 750
23 / 30 23.0 20.0 30 10 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 400
24 / 40 3) 24.3 19.8 40 8 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 300
24 / 55 24.0 20.1 55 11 35.5 36 59 47 6.2 33 64 5 8 46 / 32 3 000
left-hand threads
23 / 30 23.0 20.0 30 10 35.5 36 59 47 6.2 33 64 5 8 46 / 32 2 400

Legend
3)
= only on request
6)
torsion-preloaded



preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
26 / 16 3) 6) 26.0 21.8 16 4 41.5 42 64 53 6.2 39 71 5 8 50 / 35 1 400
26 / 24 26.0 22.3 24 6 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 000
26 / 60 26.0 22.2 60 12 41.5 42 64 53 6.2 39 71 5 8 50 / 35 3 250
27 / 45 3)
27.0 22.5 45 9 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 550
28 / 65 3) 28.0 24.2 65 13 41.5 42 64 53 6.2 39 71 5 8 50 / 35 3 500
30 / 28 30.0 26.5 28 7 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 000
30 / 50 29.8 25.3 50 10 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 800
30 / 70 30.0 26.2 70 14 41.5 42 64 53 6.2 39 71 5 8 50 / 35 3 750

Legend
3)
= only on request
6)
torsion-preloaded



preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
32 / 20 3) 32.0 27.8 20 5 49.5 50 80 65 9.0 — — 10 12 70 / 50 2 000
32 / 75 3) 32.0 28.2 75 15 49.5 50 80 65 9.0 — — 10 12 70 / 50 4 000
34 / 32 3)
34.0 30.5 32 8 49.5 50 80 65 9.0 — — 10 12 70 / 50 2 300
34 / 80 34.0 30.2 80 16 49.5 50 80 65 9.0 — — 10 12 70 / 50 4 250
36 / 200 36.0 33.4 200 40 49.5 50 80 65 9.0 — — 10 12 70 / 50 4 500

Speedy with fine-pitch thread
Legend
3)
= only on request
6)
torsion-preloaded


Speedy with fine-pitch thread

preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
5/5 5.4 3.6 5 4 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 300
5 / 20 6.0 5.0 20 16 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 300
6 / 25 7.4 6.3 25 20 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 400
7.5 / 7.5 7.7 5.9 7.5 6 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 450
8 / 30 8.6 7.5 30 24 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 500
10 / 10 10.0 8.2 10 8 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 600

10 / 35 10.1 8.9 35 28 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 600
11 / 40 11.5 10.2 40 32 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 700
12 / 45 12.8 11.4 45 36 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 800
12.5/12.53) 12.3 10.4 12.5 10 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 750
left-hand threads
5 / 20 6.0 5.0 20 16 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 300
8 / 30 8.6 7.5 30 24 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 500
10 / 35 10.1 8.9 35 28 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 600

12 / 45 12.8 11.4 45 36 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 800

Speedy with inch thread
Legend
3)
= only on request
6)
torsion-preloaded


Speedy with inch thread

preloaded
(standard)
POM-C / Bronze

Screw Nut
circle
mm mm mm N
right-hand threads
6.35 / 6.35 6.4 4.4 6.35 4 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 850
6.35 / 12.7 6.3 4.6 12.70 6 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 800
6.35 / 25.4 6.35 4.2 25.40 10 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 700
7.94 / 12.7 7.9 5.8 12.70 6 20.5 21 38 29 4.2 18.5 38 3 5 25 / 18 1 100
9.7 / 25.4 9.7 6.4 25.40 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / — 1 200

11.2 / 30.5 11.2 8.0 30.48 6 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 400
12.8 / 35.6 12.8 9.6 35.56 7 23.5 24 42 32 4.2 21.5 38 3 5 25 / 18 1 600
14.3 / 40.6 14.4 11.2 40.64 8 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 800
16.0 / 45.7 3) 16.0 12.8 45.72 9 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 000

17.6 / 50.8 17.6 14.4 50.80 10 29.5 30 49 39 5.1 27 58 3 7 42 / 30 2 200
25.7 / 76.2 25.7 24.0 76.20 15 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 800
32.0 / 96.5 32.2 29.0 96.52 19 49.5 50 80 65 9.0 — — 10 12 70 / 50 4 600
left-hand threads
9.7 / 25.4 9.7 6.4 25.40 5 23.5 24 42 32 4.2 21.5 38 3 5 25 / — 1 200
14.3 / 40.6 14.4 11.2 40.64 8 25.5 26 46 36 5.1 23.5 58 3 7 42 / 30 1 800
25.7 / 76.2 25.7 24.0 76.20 15 41.5 42 64 53 6.2 39 71 5 8 50 / 35 2 800
32.0 / 96.5 32.2 29.0 96.52 19 49.5 50 80 65 9.0 — — 10 12 70 / 50 4 600

Basic design / Materials / Precision
Basic design Nut design Of course, any other application-specific

The Eichenberger high-helix lead screws For all thread types a standard flange nut nut designs can be supplied on request
are not called Speedy for nothing: never design has been defined, which is deliver- including injection-molded solutions.
before have such high moving speeds been able in the following types:
obtained at such low rotational speeds.
The Eichenberger Speedy has made this Temperature range
possible by using a helix pitch unheard of POM-C nuts: –40 to +60 °C
before. High-helix lead screws are made EX100 nuts: –40 to +60 °C
of stainless steel and are formed by the bronze nuts: –40 to +200 °C
cold-rolling process. They are coupled
with high wear-resistant thermoplastic nuts
in simple (standard, POM-C) or preloaded Lead accuracy
(POM-C or EX 100) designs. For higher Standard
loads or special applications, alternative G9 = ≤ 0,1 mm/300 mm
plastic materials or bronze may be used Flange nut, non-preloaded (according to DIN 69051)
for the nuts. – type «SFM»: POM-C black On request
– type «SBM»: bronze other lead accuracies
Materials
Screw
- stainless steel X20Cr13,
(material N° 1.4021 / AISI 420)
- other steel qualities, i.e.
· X2CrNiMo17-12-2
(material N° 1.4404 / AISI 316 L)
or
· X10CrNiS18-09 Flange nut axial-preloaded
(material N° 1.4305 / AISI 303) – type «SFV»: POM-C black
on request – type «SBV»: bronze (on request)
- other materials, i.e. hard-anodized
aluminium for fine-pitch threads on
request Duty cycle
Load rates, lubrication notice and basic
Nut calculation with load factor fL are based
- non-preloaded: POM-C black on a duty cycle of 10 % for a Speedy with
- preloaded: non-preloaded POM-C nut.
· axial-preloaded: POM-C black
· torsion-preloaded: EX100 white
(if p0 ≥ d0 ) Efficiency
- bronze CuSn12, material N° 2.1052 Flange nut torsion-preloaded (for square The efficiency η depends on the helix angle
- other plastics on request pitches and larger) and reaches values from ~0.5 to 0.75
– type «SFT»: EX100 white (see chart on page 58).
– type «SBT»: bronze (on request)

Factory length / Handling / Lubrication
Factory length Handling Applications

In general, Eichenberger screws are avail- High-helix lead screws are precision parts The Eichenberger high-helix lead screws
able as threaded rods, approx. 3 m long. (non-hardened) and must be protected from are suitable for a variety of applications.
Upon request, lengths up to 6 m are avail- shock, dirt or moisture when transported or For short strokes, they are a substitute for
able, depending on diameter and supply stored. Please do not unpack until ready drive belts due to their low production cost.
market situation. for use. In addition, they are perfectly suitable as
substitutes for hydraulic and pneumatic
Please check for cleanness when mounting cylinders. Indeed, they allow low-friction
Lead screw ends the lead screw unit. Dirt or foreign matter on acceleration as well as free positioning and
Speedy lead screws are cut to the desired the thread may cause excessive wear. operate without secondary energy sources.
length without special machining (stand- When appropriate, they are also ideal
ard). Please consult lubrication recommendation alternatives to trapezoidal or ball screws
before mounting or operating Speedy lead due to high efficiency and a convincing
Upon request, a so-called standard screw screws. cost-performance ratio.
end journal with three turned bearing seats
(see figure below) is available. Dimensions Typical applications are:
are as per customer specifications. Radial loads and torque – Drives for doors, gates and windows
Radial loads or torque brought to bear – Handling systems
Note also the links to the CAD data at upon the nut result in overload of individual – Graphics machinery
www.gewinde.ch contact surfaces, thus seriously affecting – Drives for valves and dampers
the service life of the lead screw assembly. – Climate control systems
Therefore it is important to properly mount – Medical devices
the screw and to comply with all relevant – Textile machines
form and positional tolerances. – Food and packaging industries
– Steering actuators
– Electronics industry
Lubrication etc.
In some cases, a single lubrication with
tightening thread keyway or grease or oil is sufficient. However, any
D profile lubrication cycle depends on the applica-
tion environment.
Bronze nuts have to be lubricated regu-
larly.
Lubricant used by manufacturer:
3 turned bearing seats – Klüber Microlube GBU Y 131.
up to quality 6
surface up to Ra 0,8 µm
recess for circlip

Design fundamentals
The following are the relevant calculations Calculations at dynamic load:

which underly high-helix screw design and
safe operation. Critical rotational speed nper
Permissible rotational speeds must dif- Configuration 1: la

fer substantially from the screw’s own fixed –
frequency. fixed
KD = 276
d2
nper = KD · 106 · —— · Sn [min-1]
la2
Configuration 2: la
fixed –
nper = permissible rotational speed [min-1] simple
KD = characteristic constant as a function KD = 190
of bearing configuration
➞ see below Configuration 3: la
d2 = core diameter [mm] simple –
la = bearing distances [mm] simple
➞ see opposite KD = 122
(always include maximum allow-
able la in calculation) Configuration 4: la
Sn = safety factor fixed – free
usually Sn = 0,5…0,8 [–] KD = 43
Efficiency ηp (practical)
The efficiency η depends on the helix angle
and reaches values from ~0.5 to 0.75.

Design fundamentals
Basic calculations
Driving torque M Maximum authorized load Example

depending on speed
Depends upon the type of power transmis- Parameters:
sion. Fper. = C0 · fL [N] Speedy 10/50 with non-preloaded
POM-C nut, d0 = 10 mm, p = 50 mm and
Case 1: torque ➞ linear movement C0 = static load rate [N] C0 = 1250 N;
fL = load factor [–] for POM-C nuts required moving speed vS = 200 mm/sec.
Fa · p
Ma = ––––––––––– [Nm]
2000 · π · η
We need to find: Fper.
circumferential speed load factor
Case 2: axial force ➞ torque vC [m/min] fL [–] We calculate n [min-1],
Fa · p · η’ vS [mm/sec] · 60
Me = –––––––––– [Nm] 5 0,95 n = ––––––––––––––––
2000 · π p [mm]
10 0,75
20 0,45
200 · 60
Ma = input torque [Nm] 30 0,37 = ––––––––– = 240 min-1
Me = output torque [Nm] 40 0,12 50
Fa = axial force [N] 50 0,08

η = efficiency [%] circumferential speed vC [m/min]
η’ = corrected efficiency [%]
d0 [mm] · π · n [min-1]
p = pitch [mm] vC = –––––––––––––––––––
1000
10 · π · 240
Input performance P = –––––––––––– = 7.53 m/min
1000
Ma · n
P = ––––––– [kW] and find load factor fL in above table:
9550
P = input performance [kW] fL at vC of 7.53 m/min ≈ 0.85 [–]

n = rotational speed [min ] -1
It follows:
A safety margin of 20 % is recommended
when selecting drives. Fper. = C0 · fL = 1250 · 0.85 = 1062.5 N
In other words, the maximum load for a

Speedy 10/50 at vS = 200 mm/sec.
(➞ n = 240 min-1) is 1060 N.

Content Rondo
round thread lead screws
– Order system Rondo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

– Rondo with standard round thread and standard flange nut. . . . . . . . . . . . . . 62/63
– Basic design / Materials / Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
– Factory length / Handling / Lubrication . . . . . . . . . . . . . . . . see Speedy, page 57
…at dynamic loads:. . . . . . . . . . . . . . . . . . . . . . . . . . . see Speedy, pages 58/59
- efficiency
Basic calculations: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Speedy, page 59
- Maximum authorized load depending on speed

Order system Rondo
Example for complete round thread lead screw RGS 10x3 RFM RH 350 G9 O M
Type of lead screw
RGS = Round thread lead screw Rondo
Type of nut nut only
RFM = standard flange nut, made of EX100 white 1)

LH = left-hand thread (on request)
Lead screw overall length [mm] screw only
standard steel quality: X20Cr13 (material N° 1.4021) 1)
Lead accuracy (class) screw only

GX = lead accuracy upon specification
End machining screw only
O = no end machining (cut by grinding; screw and nut separate)

Assembly
G = screw and nut separate (standard)
1)
other materials on request
Example for screw only RGS 10x3 RH 350 G9 O G
Example for nut only RGS 10x3 RFM RH G

Rondo with standard round thread
Standard flange nut
Legend
p = pitch [mm]


Rondo with standard round thread
Rondo Dimensions Load rates

Screw Nut
d0 x p d1 d2 D1 D2 D3 D4 D5 L2 L3 L4 Cstat
±0,05 h8 hole
circle
mm mm mm N
right-hand threads
6x2 5.9 4.5 20.5 21 38 29 4.2 3 5 25 600
8x2 7.9 6.5 20.5 21 38 29 4.2 3 5 25 800
10 x 3 9.9 7.8 23.5 24 42 32 4.2 3 5 25 1200
12 x 4 12.0 9.8 25.5 26 46 36 5.1 3 7 42 2500

14 x 4 14.0 11.5 25.5 26 46 36 5.1 3 7 42 3200
16 x 5 15.7 13.0 29.5 30 49 39 5.1 3 7 42 5000

Basic design / Materials / Precision
Basic design Nut design Duty cycle

Rondo screws are a true alternative to con- One standard nut design has been de- Load rates, lubrication notice and basic
ventional trapezoidal screws. They deliver fined: calculation with load factor fL are based on
outstanding efficiency and quiet running a duty cycle of 10 % for a Rondo made of
due to their round thread profile. standard materials.
Made of steel, the lead screws are com-

bined with plastic flange nuts (outer di- Factory length / Handling / Lubrication
mensions equal those of standard Speedy See Speedy page 57.
flange nuts).
Design fundamentals
Materials See Speedy pages 58/59.
Flange nut type «RFM»
Screw
- standard: steel X20Cr13 (stainless) Of course, any other application-specific
material N° 1.4021 nut designs can be supplied on request
- other materials on request including injection-molded solutions.
Nut
- standard: EX100 white Lead accuracy
- other materials on request Standard
G9 = ≤ 0,1 mm/300 mm
(according to DIN 69051)
Temperature range On request
EX100 nuts: –40 to +60 °C other lead accuracies

Contract work
As our name suggests, thread rolling is the

core business of Eichenberger Gewinde
AG. Not only do the buyers of standard
products benefit from our expert know-how
but also those manufacturers who require
economical cold rolled threads for their
mechanical parts and components.
What materials are suitable?

State-of-the-art production methods, exten- – all metals that feature an extension
sive product expertise and access to more of at least 6 % and do not exceed a
than 1000 machine tools, enable us to tensile strength of 1300 N/mm2
meet each and every demand for rolled – high-alloy, corrosion and acid-resistant
threads – however exotic they may be: steel
– special aluminium alloys
– pitches up to 6 x diameter – riveting-quality brass
– spindle length up to 6 m – copper alloys
– spindle diameter from 2 to 160 mm – threads can be rolled on hollow
– high-helix thread profiles bodies and tubes only if wall thick-
– ball screw thread profiles ness is sufficient; this wall thickness
– all standard profiles depends upon the type and depth of in-
(M, Tr, UNC, UNF, UNEF, Whitworth) tended profile as well as material used.
– multiple start threads including Please call or write for assistance.
left-hand/right-hand threads
– special profiles What materials are not suitable?
– worm gears – extremely brittle material such as
(quality and price advantages) Ms58, cast iron, etc.
– serrations and knurlings – extremely soft materials such as lead
– synthetics
Quality Management ISO 9001:2008 – wood.
We look forward to your challenge!
Thread rolling
Contract work
The examples below illustrate the range of

available cold-rolling applications. We may
even inspire you to investigate innovative
solutions. Indeed, we are convinced that
rational cold-rolling solutions are available
to solve your particular threading problem. Trapezoidal thread
Why not consider the benefits of cold roll- as per ground profile DIN 103
ing and profit from our know-how? Flat trapezoidal thread as per DIN 380
Multiple trapezoidal thread,
incl. left/right
Ball screw profile

As a rule, ogival threaded profiles
are used
Special threads with special profiles

according to customer specifications
High-helix profiles
– multiple threads with pitch up to
6 x diameter
– synthetic or brass nuts
Worm-gear profiles
as per basic profile DIN 3976
Single or multiple gears may be rolled
Milled edges as per DIN 82

– concentric
– left/right
Serrations as per DIN 5481
Threads on awkward parts
Conical threads
Thread rolling
About the company
Development, Manufacturing and QM

«Quality first»: As an ISO 9001:2008 certi-
fied company we leave nothing to chance
– from development and manufacturing to
distribution.
Efficient processes, modern production
tools and qualified personnel with a sense
of responsibility guarantee a standard of
quality which has made us the preferred
partner for many renowned companies
around the world.
Ever since the company was founded in History

1953, the name Eichenberger Gewinde 1953 Founding of a precision turning
AG has been synonymous with premium- shop by Hans Eichenberger (sole
quality threads. A leading supplier of inno- proprietorship)
vative linear power transmission products 1976 Re-registering of the company
and a complete line of cold rolled threads, as Eichenberger AG Tools and
Eichenberger offers its customers unique Machine Works
products and comprehensive know-how. 1986 Name change to Eichenberger
Gewinde AG
1988 Development started on proprietary
ball screws
1995 Replacement of individual fabrica-
tion by industrial production
1996 Kurt Husistein assumes leadership
of the company
1998 Management buy out of Eichenber-
ger Gewinde AG (APT Holding)
2004 Foundation of Eichenberger Motion
AG (Automotive subsidiary)
2006 Openning of the production exten-
sion at Burg
Eichenberger Gewinde AG
EichenbergerGewinde
�
Basel
Aarau Lenzburg Zürich

A2 �
A1
Hallwilersee
Reinach Beinwil a/See
Burg Menziken
A1 Sursee Beromünster
A2
© Eichenberger Gewinde AG Bern Luzern
The contents of this publication is protected by copyright held When in Burg, follow the signs to Eichenberger Gewinde.
by the publisher and may not be reproduced (even in part)
unless permission is granted. Every care has been taken to For detailed directions, please visit our website
ensure the accuracy of the information contained herein but www.gewinde.ch and click «Directions».
no liability shall be accepted for any loss or damage whether
direct, indirect or consequential resulting from or in connection
with the use of the information contained herein. This catalogue
supersedes previous catalogues in which the data deviate from
those contained herein. Data subject to change as required by
technological developments.
Edition: V 09 02 28 e Eichenberger Gewinde AG

Grenzstrasse 30
CH-5736 Burg
Switzerland
Phone +41 62 765 10 10
Fax +41 62 765 10 55
info@gewinde.ch
www.gewinde.ch

Eichenberber English

Uploaded by

Copyright:

Available Formats

Eichenberber English

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eichenberber English

Uploaded by

Copyright:

Available Formats

EichenbergerGewinde

100 % Swiss made

Thread rolling is the core expertise of

Basic differences are shown in the

Due to their premium quality and preci- – ø 4–32 mm

high-helix ball screws

The cold-rolled, wear-resistant Carry Speed- – ø 8–25 mm

pages 4/5 and 28–35

high-helix lead screws

The innovative Speedy high-helix lead – ø 5–36 mm

pages 36/37 and 38–59

round thread lead screws

The alternative to trapezoidal screws with – ø 6–16 mm

pages 36/37 and 60–64

Contract work: pages 65/66

About the Company: Eichenberger Gewinde AG page 67

32/33 30/31 20/21 18/19 14–17 12/13 10/11 8/9

Carry and Carry Speed-line ball screws

12.7 x 12.7 l 12.7 x 12.7

12.7 x 25.4 n n 12.7 x 25.4

– Order system Carry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Visit www.gewinde.ch for the latest on existing and/or new products.

Carry ball screws

Example for complete ball screw KGT 16x5 FGR RH 1 S 350 G7 A O M

Type of lead screw

Nominal size (d0 x p) [mm]

Type of nut for nut only

ZYI = cylindrical single nut with single-thread ball return

Right-hand / left-hand thread

Wiper (Seal) for nut only

S = with wipers (plastic or brushes)

Ball screw overall length [mm] for screw only

Lead accuracy (class) for screw only

G9 = ≤ 0.1 mm/300 mm (standard)

Backlash for nut only

A = standard backlash (see dimensional charts)

Screw end machining for screw only

O = no end machining (cut by grinding, hardened ends; nut on mounting tube)

Example for screw only KGT 16x5 RH 350 G7 O G

Example for nut only KGT 16x5 FGR RH 1 S A G

Carry ball screws

T = standard backlash [mm]

Special designs available on request.

Carry ball screws

Carry Dimensions Load rates

Carry ball screws

T = standard backlash [mm]

Special designs available on request.

Carry ball screws

Carry Dimensions Load rates

Carry ball screws

T = standard backlash [mm]

Special designs available on request.

Carry ball screws

Carry Dimensions Load rates

Carry ball screws

T = standard backlash [mm]

Special designs available on request.

Carry ball screws