BLADDER TYPE HYDROPNEUMATIC ACCUMULATORS ACSX SERIES
TOP REPAIRABLE
Bladder type hydropneumatic accumulators with body in AISI 316L
stainless steel
Technical features : Maximum working pressure (PS): 220 bar Test pressure (PT): PS x 1,43 bar Body : in AISI 316L Stainless Steel Construction methods : three different parts united whit a special threading that under conditions of dynamic pressure tends to self-block Bladder : differently type due to the fluid utilized : -Perbunan (NBR) -Butil -Nitrile (NBR) -Poliuretano -EPDM -Viton Installation position: vertical position, nitrogen valve upward Compression Ration: - recommended: P2/P0 = 2.5 - maximum : P2/P0 = 4 Mechanical life: the number of the cycles is inversely proporzioned to the increase of the compression ration. To be used as antipulsation dampner, the precharged pressure should be between 60% and 80% of the working pressure depending also to the temperature value. Warranty: see dedicated page Spare parts: see dedicated page Available: - flanged execution on requests
According to 97/23/CE – PED 94/9/CE – ATEX ASME VIII° div.1
II 2 G/D
Nitrogen Type Max Pressure Test pressure H D C B Hydraulic connection Weight Volume bar bar litri mm mm mm mm Kg ACSX 10 220 314.6 10 450 250 36 70 2“BSP 59.7 ACSX 20 220 314.6 20 735 250 36 70 2“BSP 99.2 ACSX 25 220 314.6 25 885 250 36 70 2“BSP 120.1 ACSX 35 220 314.6 35 1265 250 36 70 2“BSP 172.9 ACSX 50 220 314.6 50 1750 250 36 70 2“BSP 240.3
