Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Sheet 1

    Uploaded by

    gli7amici
    The document contains 12 questions asking to draw relay logic diagrams and power/control circuits for various industrial automation applications involving motors, lights, and switches. Specifically, it asks to: 1) Explain the differences between contactors and relays, and the functions of overload relays. 2) Draw circuits for starting and stopping motors using pushbuttons and incorporating overload indicators. 3) Draw circuits for reversing motor directions using pushbuttons. 4) Draw logic diagrams for starting/stopping a motor with a single pushbutton and controlling lights with multiple switches. 5) Draw a circuit for starting a motor in star connection then switching to delta after 10 seconds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sheet 1

    Uploaded by

    gli7amici
    25 views3 pages
    The document contains 12 questions asking to draw relay logic diagrams and power/control circuits for various industrial automation applications involving motors, lights, and switches. Specifically, it asks to: 1) Explain the differences between contactors and relays, and the functions of overload relays. 2) Draw circuits for starting and stopping motors using pushbuttons and incorporating overload indicators. 3) Draw circuits for reversing motor directions using pushbuttons. 4) Draw logic diagrams for starting/stopping a motor with a single pushbutton and controlling lights with multiple switches. 5) Draw a circuit for starting a motor in star connection then switching to delta after 10 seconds.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 12 questions asking to draw relay logic diagrams and power/control circuits for various industrial automation applications involving motors, lights, and switches. Specifically, it asks to: 1) Explain the differences between contactors and relays, and the functions of overload relays. 2) Draw circuits for starting and stopping motors using pushbuttons and incorporating overload indicators. 3) Draw circuits for reversing motor directions using pushbuttons. 4) Draw logic diagrams for starting/stopping a motor with a single pushbutton and controlling lights with multiple switches. 5) Draw a circuit for starting a motor in star connection then switching to delta after 10 seconds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views3 pages

    Sheet 1

    Uploaded by

    gli7amici
    The document contains 12 questions asking to draw relay logic diagrams and power/control circuits for various industrial automation applications involving motors, lights, and switches. Specifically, it asks to: 1) Explain the differences between contactors and relays, and the functions of overload relays. 2) Draw circuits for starting and stopping motors using pushbuttons and incorporating overload indicators. 3) Draw circuits for reversing motor directions using pushbuttons. 4) Draw logic diagrams for starting/stopping a motor with a single pushbutton and controlling lights with multiple switches. 5) Draw a circuit for starting a motor in star connection then switching to delta after 10 seconds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Sheet No.

    1
    Part 1: Relay Logic Diagram
    1. What are the basic differences between contactor and relay and why the relay couldn’t
    be used instead of the contactor and vice versa?

    2. What are the main function of overload relay?

    3. Explain the operation and function of Miniature Circuit Breaker (MCB) and Moulded
    Case Circuit Breaker (MCCB)?

    4. Draw power and control circuits for start-stop three phase induction motor by using
    normally open (N.O) pushbutton for start and normally close (N.C) pushbutton for stop.
    When the start pushbutton is pressed, the motor turned on and stays on until the stop
    pushbutton is pressed. Insert two pilot lights. The first one turned on when the motor
    start running. The second one turned on when the motor overloaded.

    5. Draw power and control circuits for start-stop three phase induction motor by using
    normally open (N.O) pushbutton for start and normally close (N.C) pushbutton for stop.
    There is a limit sensor (limit switch) and its contact is normally open (N.O), If the limit
    switch is closed its contact the motor will be turned off.

    6. Draw power and control circuits for three phase induction motor to operate in two
    directions by using two normally open (N.O) pushbuttons for start forward and
    backward directions and only one normally close (N.C) pushbutton for stop motor
    operation.

    a) Indirect Reverse Operation (to change the direction must press stop button)
    b) Direct Reverse Operation (change the direction without pressing stop button)

    7. Draw the relay logic diagram for a circuit that start-stop motor by using a single normally
    open (N.O) pushbutton. The motor will operate when the pushbutton is pressed and
    stay running when the pushbutton is released. When the pushbutton is pressed again
    the motor will be turned off and stay off until the pushbutton is pressed again to run
    motor, and so on.

    1
    8. Draw the relay logic diagram for a circuit that operates as follows:

    • When switch one (SW1) is closed, the green pilot light turns on.
    • When switch two (SW2) is closed, the yellow pilot light turns on.
    • When both SW1 and SW2 are closed, the green and yellow pilot lights turn off,
    and the red and white pilot lights turn on.

    9. Draw the relay logic diagram for the following:

    a) Three phase induction motor operates by single pushbutton (N.O) for indirect
    reverse operation as (right – stop – left – stop – right – stop …. and so on).

    b) Three phase induction motor operates by single pushbutton (N.O) for direct
    reverse operation as (right – left – stop – right – left – stop …. and so on).

    2
    10. Draw the relay logic diagram for a bulb in a staircase which has two switches (toggle
    switches), one switch being at the ground floor and the other one at the first floor. The
    bulb can be turned ON and can be turned OFF by any one of the switches irrespective
    of the state of the other switch.

    11. Draw power and control circuits for start-stop three phase induction motor (Star – Delta
    Connection) by using normally open (N.O) pushbutton for start and normally close
    (N.C) pushbutton for stop. The motor starting its operation in star connection for 10
    seconds and then continue its operation in delta connection.

    12. Draw the relay logic diagram for the following:

    You might also like