ADR X-SPACE

ball bearings
ADR created the ADR X-SPACE range to respond quickly
to requests from space customers.
This range exists in super duplex version for metric and inch
thin section ball bearings.
While maintaining an exceptional level of performance, this
range allows a reduction in development time and cost.
Typology of mechanisms targeted mainly concerns SADM
(solar panels), APM (antennas), filter wheels or small
mechanisms, a market where ADR is widely present with
its high precision ball bearings.

ࣽ Based on ADR large Space heritage

ࣽ More than 20 duplex ball bearings
ࣽ From 8 mm bore up to 142 mm outer diameter
ࣽ Fluid space lubrication in standard – Possibility solid lubricant
on specification
ࣽ Quality material for space application and outgassing tested
ࣽ Development phase reduced
ࣽ Manufacture and test tooling available
ࣽ 3 parameters always taken into account :
▪ Performance : Load capacity - Torque - Stiffness
▪ Reliability thanks to robust design
▪ Industrial optimization
Version Super duplex ball bearings Open version only
Angular contact versions only with full cage Contact angle 15°
Back-to-Back configuration (DO) Tolerance class T4/TA4 (metric/inch) – ABEC 7
Non separable version only Materials space qualified

Materials AISI 440C/X105CrMo17 + phenolic resin (space qualified)

Ø D1
Ø d1
Fluid lubrication for space application

ØD
Ød
Note: Solid or specific lubrication on demand only

Documentation Technical Definition of Product (TDP), overall dimension drawing, DML, DPL
Specific calculations (launching/orbit loads, stiffness, lifetime, friction…): personalized
document supplied on demand

METRIC ADR X-SPACE BALL BEARINGS

Basic load rating N2) for axial/radial and Nm2) for moment
Basic Dimensions in mm Radial Axial Moment Mass
designation Dyn. Stat. Dyn. Stat. Dyn. Stat.
d D B d1 D1 r1) C Co C ax. Co ax. C Mt Co Mt g
XDM608H 8 22 14 12.45 19.4 .3 3,775 2,396 2,490 2,240 21.6 12.8 24.6
XDM61801H 12 21 10 15 19.2 .3 2,002 1,694 1,315 1,313 10.7 8.5 12.3
XDM61802H 15 24 10 17.9 22.2 .3 2,382 2,378 1,535 2,117 14.1 13.4 14.5
XDM61902H 15 28 14 18.95 25.9 .3 4,656 3,781 3,040 3,648 32.7 24.9 31
XDM61804H 20 32 14 24 29.6 .3 4,000 4,230 2,550 3,327 32.1 32.3 36
XDM61905H 25 42 18 30.3 38.8 .3 7,918 8,256 5,020 7,554 80.9 80 84
XDM61806H 30 42 14 34 39.6 .3 4,572 6,085 2,830 6,042 45.8 58.6 52
XDM61907H 35 55 20 41.1 51.2 .3 10,587 12,246 6,630 8,578 136 143.4 146
XDM61807H 35 47 14 39 44.6 .3 4,752 6,893 2,900 6,864 52.2 73.5 60
XDM61813H 65 85 20 71.6 81 .6 13,149 21,940 7,880 21,870 245 405 260

THIN SECTION ADR X-SPACE BALL BEARINGS

Basic load rating N2) for axial/radial and Nm2) for moment
Basic Dimensions in mm/in inches Radial Axial Moment Mass
designation Dyn. Stat. Dyn. Stat. Dyn. Stat.
d D B d1 D1 r1) C Co C ax. Co ax. C Mt Co Mt g
26.9875 38.1 12.7 30.57 36.05 .38
XAA717H 4,866 5,909 3,200 4,695 44.9 51.3 38
1.0625 1.5 .5 1.2035 1.4193 .015
33.3375 44.45 12.7 36.92 42.4 .38
XAA721H 5,118 6,771 3,310 5,505 54 66.5 45
1.3125 1.75 .5 1.4535 1.6693 .015
38.1 47.625 9.525 41.38 45.48 .25
XAA624H 3,491 5,412 2,190 4,560 37.2 53 33
1.5 1.875 .375 1.6291 1.7906 .0098
39.6875 50.8 12.7 43.27 48.75 .38
XAA725H 5,564 8,116 3,535 6,709 65.7 89 52
1.5625 2 .5 1.7035 1.9193 .015
50.8 63.5 12.7 55.17 60.55 .635
XAA832H 5,956 9,858 3,700 8,326 84.3 128.9 79
2 2.5 .5 2.172 2.3839 .025
63.5 76.2 12.7 67.87 73.25 .635
XAA840H 6,279 11,599 3,820 9,943 104.3 177.8 96
2.5 3 .5 2.672 2.8839 .025
76.2 79.375 15.875 68.97 75.65 1.015
XAA1040H 9,789 19,131 6,700 10,360 201 187.5 151
3 3.125 .625 2.7154 2.9783 .04
77.7875 98.425 15.875 85.144 93.26 .38
XAA1349H 13,930 28,968 9,420 15,381 317 352 260
3.0625 3.875 .625 3.3521 3.6717 .015
76.2 88.9 12.7 80.57 85.92 .635
XAA848H 6,651 13,575 3,980 11,758 182.3 239 114
3 3.5 .5 3.172 3.3827 .025
88.9 101.6 12.7 93.27 98.6 .635
XAA856H 6,988 15,551 4,125 13,573 149.5 309 132
3.5 4 .5 3.672 3.8819 .025
101.6 117.475 15.875 107.07 113.7 1.015
XAA1064H 11,613 30,334 7,550 16,149 316.5 433 233
4 4.625 .625 4.2154 4.4764 .04
120.65 136.525 15.875 126.12 132.7 1.015
XAA1076H 12,356 35,940 7,920 19,044 459 579 274
4.75 5.375 .625 4.9654 5.2244 .04
127 142.875 15.875 132.47 139 1.015
XAA1080H 12,623 37,973 8,050 20,096 408.5 636 288
5 5.625 .625 5.2154 5.4724 .04
1)
Minimum bearing corner radius and maximum shaft or housing fillet radius.
2)
Load ratings per ISO 76 and ISO 281. For space application, a margin must be applied (ECSS requirements or contact ADR).
Note : References based and designed from space heritage ball bearings and compliant to ECSS standard requirements (materials, outgassing…)