Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    SGRR Urology Hvac Boq

    Uploaded by

    EDUCATE
    This document provides a bill of quantities (BOQ) for HVAC works for a urology facility. It includes: 1) Supply and installation of 4 units of 8.5 ton ductable air cooled units from Carrier, along with strip heater banks and refrigerant piping. 2) Fabrication and installation of GI sheet metal ducting in 24G and 22G, along with grilles, dampers, and external/internal insulation. 3) Internal power and control cabling between indoor and outdoor units. 4) The total cost is over 1.5 million INR including taxes, with payment terms of advances and installments upon material delivery and commissioning.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    SGRR Urology Hvac Boq

    Uploaded by

    EDUCATE
    22 views2 pages
    This document provides a bill of quantities (BOQ) for HVAC works for a urology facility. It includes: 1) Supply and installation of 4 units of 8.5 ton ductable air cooled units from Carrier, along with strip heater banks and refrigerant piping. 2) Fabrication and installation of GI sheet metal ducting in 24G and 22G, along with grilles, dampers, and external/internal insulation. 3) Internal power and control cabling between indoor and outdoor units. 4) The total cost is over 1.5 million INR including taxes, with payment terms of advances and installments upon material delivery and commissioning.

    Original Title

    Sgrr Urology Hvac Boq

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a bill of quantities (BOQ) for HVAC works for a urology facility. It includes: 1) Supply and installation of 4 units of 8.5 ton ductable air cooled units from Carrier, along with strip heater banks and refrigerant piping. 2) Fabrication and installation of GI sheet metal ducting in 24G and 22G, along with grilles, dampers, and external/internal insulation. 3) Internal power and control cabling between indoor and outdoor units. 4) The total cost is over 1.5 million INR including taxes, with payment terms of advances and installments upon material delivery and commissioning.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    22 views2 pages

    SGRR Urology Hvac Boq

    Uploaded by

    EDUCATE
    This document provides a bill of quantities (BOQ) for HVAC works for a urology facility. It includes: 1) Supply and installation of 4 units of 8.5 ton ductable air cooled units from Carrier, along with strip heater banks and refrigerant piping. 2) Fabrication and installation of GI sheet metal ducting in 24G and 22G, along with grilles, dampers, and external/internal insulation. 3) Internal power and control cabling between indoor and outdoor units. 4) The total cost is over 1.5 million INR including taxes, with payment terms of advances and installments upon material delivery and commissioning.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    BOQ HVAC WORKS FOR UROLOGY (MAHANT INDRESH SUPER

    SPECIALITY , DEHRADUN) 10/30/2023


    UNIT QTY
    S.NO. DESCRIPTION OF ITEM AND WORKS RATES AMOUNT
    1 Supply of 8.5TR DUCTABLE AIR COOLED units with Scroll compressor ,
    coi, motor and control saferty at below mentioned operating conditions ,
    CAPACITY 8.5Tr X 1Nos scroll compressor, R410a Refrigerant Greem
    Gas Microprocessor based control panel, all mounted on M.S. frame. Motor shall
    be suitable for nos

    415 volts ± 10%, 50Hz ± 5 %, three phases A.C. supply. The Outdoor Unit as
    described above shall be in line with specifications. 4 139400 557600
    MAKE: Carrier R410A

    2 STRIP HEATER BANK SECTION


    2a supply and installation testing commissioning of 9KW heater No, 2
    bank section (HEATER BANK ) 78500 157000

    Total (Part-A) TOTAL 714600


    GST 28% 200088
    PART A TOTAL WITH GST 914688
    PART-B (L0W SIDE)
    Installation, Testing & commissioning of AIR COOLED DUCTABLE UNITS
    Nos. 4
    3 8.5Tr X 4Nos. 8500 34000

    Supply & Installation of HARD DRAWN /SOFT DRAWN copper refrigerant


    piping complete with 19mm Class O closed cell physically cross linked tabular
    4
    insulation properly glued (By using Rubber based contact adhesive for pipe &
    insulation contact surface) and proper piping supporting (clamping with rubber
    gasket) etc as per approved shop dwg. (10mtr each circuit ) Rmt 40
    1550 62000
    Supply & Installation of PVC Drain piping from the indoor unit till the nearest
    drain pipe shall be 12mm thick wall Class O closed cell physically cross linked
    tabular insulation properly glued (By using Rubber based contact adhesive for pipe
    & insulation contact surface
    5
    a 32mm pipes RMT 45 290 13050
    6 G.I Ducting
    Supply, fabrication, installation & testing of G.I sheet metal ducting duly poly
    supplied sealed complete (as required) & as per specifications & as per approved
    shop
    drawings.
    G.I Ducting duly silicon sealed.
    a 24 G SMT 95 1150 109250
    b 22 G SMT 45 1550 69750

    7 Supply, installation, testing & commissioning of Powder coated Aluminum


    extruded grilles for supply & return air(with Aluminum frames if required) as per
    SQMT 8
    specification & the sizes will be as per shop drawing mention: 6800 54400
    8 Supply, installation, testing and commissioning of Aluminum. volume control
    dampers with key operated of anodized black painted matt finished in supply /
    return air
    collars. SQMT 4 4500 18000
    9 Supplying , installation, testing & commissioning of external thermal insulation
    on ducts with Closed Cell Cross Linked Polyethylene (XLPE) Foam of density
    33 Kg/m³ with 12 mm thick & thermal Conductivity not exceeding 0.035
    W/mK at an average Temperature of 40°C. The Material Shall be rated as Class 1,
    As per BS476 Part 7 , The Smoke Density as per AS - 1530.3 Shall not exceed

    1. The Material shall have Fire Approval from CBRI - Roorkie & no toxicity
    under flaming and non- flaming condition as per AITM 3.000 (1993) .Adhesive
    used for setting the insulation shall be non - flammable, Vapors Proof. All Joints
    should be sealed with 3 mm thick 50 mm wide PE tape and Flange to be
    overlapped by 6" width of the same material thickness. Finally Duct insulated
    should be strapped by 12mm Plastic Packing strip at every random meter &

    conforming to standard Spec.


    10 13 mm thick Closed Cell Cross Linked Polyethylene ( XLPE) Foam with Factory 480 67200
    SMT 140
    Laminated Al PE Foil for Supply Air Duct/Return Air Duct
    11 Supply, Installation, Testing and Commissioning of Acoustic lining inside ducts
    using Nitrile elastomeric Open Cell Acosutic Insulation as per
    drawings.
    12 mm- 15 mm thick SMT 40 560 22400
    12 Supply & Installation of internal power & control cabling between indoor &
    outdoor units complete with suitable size cables , fixing accessories, pvc condit,
    End termination , etc. Power for indoor unit/out door unit panel shall be provided Rmt 45
    & termination client scope. The power and control wiring from indoor to outdoor
    unit shall also be in HVAC vendor scope
    270 12150
    13 Supply & Installation of GI trey covered with GI Sheet closed for all exposed
    copper pipe/Electric cable RMT 15 870 13050
    14 Supply and Intallation Of Canvas Connections Set 4 2200 8800

    Design ,drawing and complete testing , Balancing and handover of Lo 1 1


    15 above system 25000 25000
    Total Rs. 509050
    GST18% 91629
    PARTB TOTAL WITH GST 600679
    GRAND TOTAL WITH GST 1515367
    General Terms And Conditions:
    Above quoted quantity of low side items are tentative, final payment shall be made after actual measurement at
    site.

    Payment Terms: AC UNITS :100 % Advance along with PO ,


    Low side : 30% Advance, 50% agaisnt material at site , 10% after installation and balance 10% after
    B.
    testing commissioning and handover.
    C. Main power supply with suitable MCB upto the AC unit shall be in your scope.
    D. All Civil Works & carpanter will be in your scope.
    E. DELIVERY :45 Days.
    F. WARRANTY : 1 year warranty
    G. FRIGHT : FOR SITE

    CLIMATIZERS ENGINEERS AND CONTRACTORS

    You might also like