High Pressure Equipment

Medium Pressure
Valves, Fittings and Tubing
20,000 psi service
High Pressure Equipment Company has developed a line of Medium Pressure products to assure safe and easy
plumbing through 20,000 psi. These needle valves, fittings, line filters, check valves, safety heads, rupture discs,
anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality.
The reliable performance of these products has made HiP one of the world’s leading suppliers of elevated
pressure components.
Medium Pressure components use a compact coned-and-threaded connection which permits the larger bore
sizes and increased flow rates common in this pressure class. Medium Pressure valves are available in 1/4", 3/8",
9
/16", 3/4", and 1" O.D. tubing sizes and five patterns to satisfy widely varied requirements. A line of fittings is available
to facilitate adapting to Taper Seal, High Pressure or other threaded pipe systems.

Index Page

20,000 psi Valves* . . . . . . . . . . .3.2-3.3

Fittings . . . . . . . . . . . . . . . . . . . . . . .3.4
Unions, Bulkheads & Caps . . . . . . .3.5
Line Filters & Check Valves . . . . . . .3.6
Safety Heads & Rupture Discs . . . .3.7
Anti-Vibration Gland Assemblies . . .3.8
Tubing . . . . . . . . . . . . . . . . . . . . . . .3.9
Coned & Threaded Nipples . . . . . . .3.9
Connection Details . . . . . . . . . . . . .3.A
. . . . . . . . . . . . . . . . . . . . . . . .Appendix

*Note: 10,000 psi large orifice

is offered in 3/4" and 1" size.

3.1
R4 2/02
 High Pressure Equipment

20,000 psi
Medium Pressure Valves
Medium Pressure (coned & threaded) type connections
for 1/4", 3/8", 9/16", 3/4", and 1" O.D. tubing.
Non-rotating tip stems are standard for on-off service and
insure long life on valve seats. Regulating tip stems are available
for all valves at no additional cost, add - REG to part number.
Glands and collars for tubing are supplied with each valve
unless otherwise requested (glands and collars shown on
LF4 (1/4") and LF6 (3/8") pages 3.4 and 3.A).
Materials include high tensile type 316 stainless steel bodies
and hardened 17-4PH stainless steel lower section stems.
Packing is Teflon (450°F) standard with optional Viton
(350°F), BUNA-N (200°F) and Grafoil (800°F) available at
no additional cost.
Air operators for remote control operation are available for all
valves. (Select required valve and add “HIPCO”. Refer to section
7.0 for additional data).
High temperatures can be accommodated by using extended
stuffing boxes (see page 6.6).

Valve Features
● Non-rotating stem tips

● Packing below stem threads

● Type 316 ss high tensile bodies
● Positive gland lock device
LF9 ( /16")
9
● No stem adjustment needed
● Black T-handles or choice of 4 colors
● Tube sizes 1/4" through 1"

*Note: 10,000 psi large orifice

LF12 (3/4") and LF16 (1")* is offered in 3/4" and 1" size.

3.2
R5 8/04
 20,000 psi Medium Pressure Valves
Two Way Straight Valves
K Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
1
/4" O.D. 20-11LF4 20,000 LF4 1
/8" 43/8" 2" 3
/8" 13
/16" 2" 3
/8" 11/4" 7
/32" 3
/4"
D
L
J 3
/8" O.D. 20-11LF6 20,000 LF6 13
/64" 43/8" 2" 3
/8" 13
/16" 2" 3
/8" 11/4" 7
/32" 3
/4"
9
/16" O.D. 20-11LF9 20,000 LF9 5
/16" 61/8" 21/2" 1
/2" 11/8" 27/8" 1
/2" 13/8" 11
/32" 1"
H 3
/4" O.D. 20-11LF12 20,000 LF12 7
/16" 7" 3" 3
/4" 11/2" 33/4" 5
/8" 13/4" 7
/16" 13/8"
F G 3
/4" O.D. 10-11LF12 10,000 LF12 33
/64" 7" 3" 3
/4" 11/2" 33/4" 5
/8" 13/4" 7
/16" 13/8"
E 1" O.D. 20-11LF16 20,000 LF16 9
/16" 827/64" 41/8" 7
/8" 113/16" 45/8" 11/8" 21/2" 9
/16" 13/4"
1" O.D. 10-11LF16 10,000 LF16 11
/16" 827/64" 41/8" 7
/8" 113/16" 45/8" 11/8" 21/2" 9
/16" 13/4"

Two Way Angle Valves

K Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
_
1
/4" O.D. 20-12LF4 20,000 LF4 1
/8" 413/16" 2" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
_
D J
3
/8" O.D. 20-12LF6 20,000 LF6 13
/64" 413/16" 2" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
L _
9
/16" O.D. 20-12LF9 20,000 LF9 5
/16" 65/8" 21/2" 15/8" 33/8" 1/2" 13/8" 11
/32" 1"
H _
3
/4" O.D. 20-12LF12 20,000 LF12 7
/16" 71/2" 3" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
_
G 3
/4" O.D. 10-12LF12 10,000 LF12 33
/64" 71/2" 3" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
1" O.D. _ 57/16" 11/8"
E
20-12LF16 20,000 LF16 9
/16" 93/8" 41/8" 29/16" 21/2" 9
/16" 13/4"
1" O.D. _ 57/16" 11/8"
10-12LF16 10,000 LF16 11
/16" 93/8" 41/8" 29/16" 21/2" 9
/16" 13/4"

Three Way Valves / Two Pressure Connections

K Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
1
/4" O.D. 20-13LF4 20,000 LF4 1
/8" 5" 2" 1" 17/16" 25/8" 3
/8" 11/4" 7
/32" 3
/4"
D J
3
/8" O.D. 20-13LF6 20,000 LF6 13
/64" 5" 2" 1" 17/16" 25/8" 3
/8" 11/4" 7
/32" 3
/4"
L 9
/16" O.D. 20-13LF9 20,000 LF9 5
/16" 67/8" 21/2" 11/4" 17/8" 35/8" 1
/2" 13/8" 11
/32" 1"
H 3
/4" O.D. 20-13LF12 20,000 LF12 7
/16" 77/8" 3" 25/8" 23/8" 45/8" 5
/8" 13/4" 7
/16" 13/8"
F G 3
/4" O.D. 10-13LF12 10,000 LF12 33
/64" 77/8" 3" 25/8" 23/8" 45/8" 5
/8" 13/4" 7
/16" 13/8"
E 1" O.D. 20-13LF16 20,000 LF16 9
/ "
16 93/4" 41/8" 21/8" 31/16" 57/8" 11/8" 21/2" 9
/16" 13/4"
1" O.D. 10-13LF16 10,000 LF16 11
/16" 93/4" 41/8" 21/8" 31/16" 57/8" 11/8" 21/2" 9
/16" 13/4"

Three Way Valves / One Pressure Connection

K Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
1
/4" O.D. 20-14LF4 20,000 LF4 1
/8" 413/16" 2" 11/4" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
D J 3
/8" O.D. 20-14LF6 20,000 LF6 13
/64" 413/16" 2" 11/4" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
L
H
9
/16" O.D. 20-14LF9 20,000 LF9 5
/16" 65/8" 21/2" 15/8" 15/8" 33/8" 1/2" 13/8" 11
/32" 1"
3
/4" O.D. 20-14LF12 20,000 LF12 7
/16" 71/2" 3" 2" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
F G 3
/4" O.D. 10-14LF12 10,000 LF12 33
/64" 71/2" 3" 2" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
E 1" O.D. 20-14LF16 20,000 LF16 9
/16" 93/8" 41/8" 25/8" 25/8" 57/16" 11/8" 21/2" 9
/16" 13/4"
1" O.D. 10-14LF16 10,000 LF16 11
/16" 93/8" 41/8" 25/8" 25/8" 57/16" 11/8" 21/2" 9
/16" 13/4"

Three Way / Two Stem Connection Valves

J
Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
F L G 1
/4" O.D. 20-15LF4 20,000 LF4 1
/8" 53/4" 2" 111/16" 13/16" 33/8" 3
/8" 11/4" 7
/32" 3
/4"
D K H 3
/8" O.D. 20-15LF6 20,000 LF6 13
/64" 53/4" 2" 111/16" 13/16" 33/8" 3
/8" 11/4" 7
/32" 3
/4"
F G 9
/16" O.D. 20-15LF9 20,000 LF9 5
/16" 83/8" 21/2" 29/16" 13/4" 51/8" 1
/2" 13/8" 11
/32" 1"
3
/4" O.D. 20-15LF12 20,000 LF12 7
/16" 93/4" 3" 31/4" 21/4" 61/2" 5
/8" 13/4" 7
/16" 13/8"
J E 3
/4" O.D. 10-15LF12 10,000 LF12 33
/64" 93/4" 3" 31/4" 21/4" 61/2" 5
/8" 13/4" 7
/16" 13/8"
1" O.D. 20-15LF16 20,000 LF16 9
/16" 123/16" 41/8" 41/8" 213/16" 81/4" 11/8" 21/2" 9
/16" 13/4"
1" O.D. 10-15LF16 10,000 LF16 11
/16" 123/16" 41/8" 41/8" 213/16" 81/4" 11/8" 21/2" 9
/16" 13/4"

Replaceable Seat Valves

K
Tubing Catalog No. psi Connection Orifice D E F G H J K L Thickness
D _
J
1
/4" O.D. 20-12LF4-R 20,000 LF4 1
/8" 55/8" 2" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
L _
3
/8" O.D. 20-12LF6-R 20,000 LF6 13
/64" 55/8" 2" 11/4" 27/16" 3/8" 11/4" 7
/32" 3
/4"
H _
9
/16" O.D. 20-12LF9-R 20,000 LF9 5
/16" 8" 21/2" 15/8" 33/8" 1/2" 13/8" 11
/32" 1"
G _
3
/4" O.D. 20-12LF12-R 20,000 LF12 7
/16" 87/8" 3" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
_
3
/4" O.D. 10-12LF12-R 10,000 LF12 33
/64" 87/8" 3" 2" 41/4" 5/8" 13/4" 7
/16" 13/8"
1" O.D. 9
/16" 111/6" 41/6" _ 29/16" 57/16" 11/8" 21/2"
E
20-12LF16-R 20,000 LF16 9
/16" 13/4"
1" O.D. 11
/16" 111/6" 41/8" _ 29/16" 57/16" 11/8" 21/2"
10-12LF16-R 10,000 LF16 9
/16" 13/4"

3.3
High Pressure Equipment Company R3 12/00
2955 W. 17th Street • Erie, PA 16505 U.S.A. • Phone: (814) 838-2028 • 1-800-289-7447 • Fax: (814) 838-6075 • Website: www.HighPressure.com
 High Pressure Equipment
Glands/Collars/Plugs
Elbows/Tees/Crosses
A complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is
high tensile 316 stainless steel. Standard tubing glands and collars are provided unless otherwise specified.
Connection Components
Tube Tube Tube
Catalog No. Size Gland Catalog No. Size Collar Catalog No. Size Plug
20-2LM4 1
/4" 20-2L4 1
/4" 20-7LM4 1
/4"
20-2LM6 3
/8" 20-2L6 3
/8" 20-7LM6 3
/8"
20-2LM9 9
/16" 20-2L9 9
/16" 20-7LM9 9
/16"
20-2LM12 3
/4" 20-2L12 3
/4" 20-7LM12 3
/4"
20-2LM16 1" 20-2L16 1" 20-7LM16 1"
15-2LM24 11/2" 15-2L24 11/2" 15-7LM24 11/2"

Medium Pressure Elbows

Pressure
E Rating
G Catalog No. psi Connections A-B E F G H Thickness
20-22LF4 20,000 1
/4" O.D. TUBE LF4 13/16" 1" /8"
7
/16"
11 5
/8"
B
20-22LF6 20,000 3
/8" O.D. TUBE LF6 13/8" 13/8" 1" 1" 3
/4"
H
20-22LF9 20,000 9
/16" O.D. TUBE LF9 13/4" 13/4" 11/4" 11/4" 1"
A F 20-22LF12 20,000 3
/4" O.D. TUBE LF12 21/4" 21/4" 11/2" 11/2" 13/8"
20-22LF16 20,000 1" O.D. TUBE LF16 3" 3" 21/16" 21/16" 13/4"
15-22LF24 15,000 11/2" O.D. TUBE LF24 53/4" 4" 27/8" 27/8" 21/4"

Medium Pressure Tees

E Pressure
G Rating
Catalog No. psi Connections A-B-C E F G H Thickness
B 20-23LF4 20,000 1
/4" O.D. TUBE LF4 13/4" 1" /8"
7
/16"
11 5
/8"
H 20-23LF6 20,000 3
/8" O.D. TUBE LF6 2" 13/8" 1" 1" 3
/4"
C A F 20-23LF9 20,000 9
/16" O.D. TUBE LF9 21/2" 13/4" 11/4" 11/4" 1"
20-23LF12 20,000 3
/4" O.D. TUBE LF12 3" 21/4" 11/2" 11/2" 13/8"
20-23LF16 20,000 1" O.D. TUBE LF16 41/8" 3" 21/16" 21/16" 13/4"
15-23LF24 15,000 11/2" O.D. TUBE LF24 53/4" 4" 27/8" 27/8" 21/4"

Medium Pressure Crosses

E
Pressure
G Rating
Catalog No. psi Connections A-B-C-D E F G H Thickness
B
H 20-24LF4 20,000 1
/4" O.D. TUBE LF4 13/4" 13/8" /8"
7
/16"
11 5
/8"
C 20-24LF6 20,000 3
/8" O.D TUBE LF6 2" 2" 1" 1" 3
/4"
A
F 20-24LF9 20,000 9
/16" O.D. TUBE LF9 21/2" 21/2" 11/4" 11/4" 1"
20-24LF12 20,000 3
/4" O.D. TUBE LF12 3" 3" 11/2" 11/2" 13/8"
D
20-24LF16 20,000 1" O.D. TUBE LF16 41/8" 41/8" 21/16" 21/16" 13/4"
15-24LF24 15,000 11/2" O.D. TUBE LF24 53/4" 53/4" 27/8" 27/8" 21/4"

3.4
R3 2/14
Union Couplings (Slip Type)
Union (slip type) couplings are ideal
for use in confined space installations.
This design allows the entire coupling
to be disconnected and slipped back A B
over the tubing to facilitate assembly
and disassembly. In installations
where tubing is easily assembled,
it is preferable (and less expensive)
Catalog No. Tubing psi A B Orifice Length Hex
to use standard straight couplings
(see section 8.0). Standard material 20-21LF4-U 1
/4" O.D. 20,000 LF4 LF4 1
/8" 19/16" /8"
5

is high tensile 316 stainless steel. 20-21LF6-U 3

/8" O.D. 20,000 LF6 LF6 7
/32" 1 /4"
3
/4"
3

Standard tubing collars and glands are

provided unless otherwise specified. 20-21LF9-U 9
/16" O.D. 20,000 LF9 LF9 23
/64" 21/8" 1"
20-21LF12-U 3
/4" O.D. 20,000 LF12 LF12 33
/64" 21/2" 13/8"
20-21LF16-U 1" O.D. 20,000 LF16 LF16 11
/16" 3 /2"
1
13/4"
15-21LF24-U 1 /2" O.D.
1
15,000 LF24 LF24 15
/16" 5" 21/4"

Bulkhead Couplings Locknut

Bulkhead couplings are designed

specifically for passing a tubing
connection through a panel or steel A B
barricade. These couplings include
a locknut as shown. Material is high
tensile 316 stainless steel. Standard
tubing collars and glands are included
unless otherwise specified.
Catalog No. Tubing psi Connections Orifice Length Hex Hole Diameter
20-21LF4-B 1
/4" O.D. 20,000 LF4 /"
1
8 17/8" 1" /16"
13

20-21LF6-B 3
/8" O.D. 20,000 LF6 7
/ "32 2" 1" /16"
15

20-21LF9-B 9
/16" O.D. 20,000 LF9 23
/64" 23/8" 13/8" 11/8"
20-21LF12-B 3/4" O.D. 20,000 LF12 33
/64" 25/8" 17/8" 111/16"
20-21LF16-B 1" O.D. 20,000 LF-16 11
/16" 31/2" 21/8" 115/16"
15-21LF24-B 11/2" O.D. 15,000 LF24 15
/16" 5" 21/2" 27/16"

Caps
Tubing end caps are offered for use A
in sealing off tubing ends either for
temporary use or permanent use,
such as on small volume reservoirs.
Standard material is high tensile
316 stainless steel. Standard tubing Catalog No. Tubing psi A Length Hex
collars and glands are provided 20-21LF4-C 1
/4" O.D. 20,000 LF4 /8"
7
/8"
5

unless otherwise specified. 20-21LF6-C 13/8"

3
/8" O.D. 20,000 LF6 /4"
3

20-21LF9-C 9
/16" O.D. 20,000 LF9 11/2" 1"
20-21LF12-C 3
/4" O.D. 20,000 LF12 21/2" 13/8"
20-21LF16-C 1" O.D. 20,000 LF16 3" 13/4"
15-21LF24-C 11/2" O.D. 15,000 LF24 31/2" 21/4"

3.5
High Pressure Equipment Company R2 2/14
2955 W. 17th Street • Erie, PA 16505 U.S.A. • Phone: (814) 838-2028 • 1-800-289-7447 • Fax: (814) 838-6075 • Website: www.HighPressure.com
 High Pressure Equipment
Line Filters
The line filters as shown utilize sintered stainless steel FLOW
filter discs 4 pc./set. Porosities are available as per
the chart to the right. If not otherwise specified, 100
micron filter discs are supplied. (One micron = 0.001
millimeters). Material of body, caps and cover is high
tensile 316 stainless steel. Standard tubing glands and
collars are provided unless otherwise specified.

Micron Size Filter

Available
Catalog No. Tubing psi Connections Orifice Length Thickness 0.5 2 5 10 40 100
20-51LF4 1
/4" O.D. 20,000 LF4 /8"
1
51/4" 13/8" • • • • • •
20-51LF6 3
/8" O.D. 20,000 LF6 7
/32" 5 /4"
1
13/8" • • • • • •
20-51LF9 9
/16" O.D. 20,000 LF9 23
/64" 51/4" 13/8" • • • • • •
Ball Check Valves FLOW

Ball type check valves insure

flow in one direction only.
Material for body, caps and
cover is high tensile 316 stainless
steel. Standard tubing glands
and collars are provided
unless otherwise specified. Catalog No. Tubing psi Connections Orifice Length Thickness
20-41LF4 1
/4" O.D. 20,000 LF4 1
/8" 33/4" 1"
20-41LF6 3
/8" O.D. 20,000 LF6 7
/32" 3 /4"
3
1"
20-41LF9 / " O.D.
9
16 20,000 LF9 23
/64" 41/2" 13/8"
20-41LF12 3
/4" O.D. 20,000 LF12 7
/16" 5 /8"
1
13/4"
20-41LF16 1" O.D. 20,000 LF16 9
/16" 6 /2"
1
21/2"
Note: 20-41LF16 material 17-4PH

Soft Seat Check Valves FLOW

Soft seat check valves insure flow in one direction
only and can be mounted in any position. These
are highly reliable for both gas and liquid service.
Standard material for the sealing surface (soft seat)
is Buna-N (nitrile) on 1/4", 3/8" and 9/16" models, and
Teflon on 3/4" and 1" models, with other materials
(including each of these, as well as Viton)
available upon request. Temperature
is limited by the choice of O-ring Catalog No. Tubing psi Connections Orifice Length Thickness
material. Material of all other parts 20-41LF4-T 33/4" 1"
1
/ " O.D.
4 20,000 LF4 1
/"
8
is high tensile 316 stainless steel.
Standard glands and collars are 20-41LF6-T 3
/8" O.D. 20,000 LF6 7
/32" 3 /4"
3
1"
provided unless otherwise specified. 20-41LF9-T /16" O.D.
9
20,000 LF9 23
/64" 41/2" 13/8"
20-41LF12-T 3
/4" O.D. 20,000 LF12 7
/16" 51/8" 13/4"

Note: 20-41LF16 material 17-4PH 20-41LF16-T 1" O.D. 20,000 LF16 9

/16" 6 /2"
1
21/2"

3.6
R4 12/13
Safety Heads
The male inlet design can be inserted directly into the
tubing connections of valves and various fittings such
as tees and crosses, or located in pressure vessels.
Outlet connections are 3/8" pipe (NPT). This outlet
may be connected to a suitable discharge line to vent
pressure to a safe location in the event of bursting of
the rupture disc. Torque required for sealing rupture
discs will range from 40 to 90 foot pounds, depending
upon pressure and media being used.
Material of body and hold down nut is high tensile
316 stainless steel. Standard tubing glands and collars
are provided unless otherwise specified.
Note: Rupture discs are not included and must be
ordered as a separate item.

Catalog No. Tubing psi Connections Orifice Length Hex

20-61LM4 1
/4" O.D. 20,000 LM4 0.125" 2" 1"
20-61LM6 3
/8" O.D. 20,000 LM6 0.219" 2" 1"
20-61LM9 9
/ " O.D.
16 20,000 LM9 0.250" 2 1/8" 1"
20-61LM12 3
/4" O.D. 20,000 LM12 0.250" 2 3/8" 11/8"
20-61LM16 1" O.D. 20,000 LM16 0.250" 3 /2"
1
11/8"

Rupture Discs
/4" Angled Seat
1
SPECIAL DISCS are Standard rupture discs are available from stock in burst
available on special order pressures as listed in the chart below. All pressures
for pressure ranges not through 20,000 psi are shaded. These discs are 316
shown above and in stainless steel (except for 1,000 psi which are inconel)
numerous materials and and may be used with any of the safety heads shown.
coatings. Consult factory Note that these rupture discs are supplied with a
for price and delivery. tolerance of plus 6% and minus 3% of specified burst
pressure. Samples of each batch are tested and the
actual average burst pressure is stamped on an
1/4"
accompanying metal tag. Factors influencing rupture
effective
area disc life include corrosion, metal fatigue, and cyclic
effects. Periodic replacement is recommended to
prevent premature failure.

Standard Burst Pressures (in psi at 72°F)

1,000 3,000 5,000 7,000 9,000 11,000 17,500 25,000 37,500 55,000
1,500 3,500 5,500 7,500 9,500 11,500 18,000 27,000 40,000 60,000
2,000 4,000 6,000 8,000 10,000 12,500 20,000 30,000 45,000 65,000
2,500 4,500 6,500 8,500 10,500 15,000 22,500 35,000 50,000

3.7
High Pressure Equipment Company R5 9/07
2955 W. 17th Street • Erie, PA 16505 U.S.A. • Phone: (814) 838-2028 • 1-800-289-7447 • Fax: (814) 838-6075 • Website: www.HighPressure.com
 High Pressure Equipment
Anti-Vibration Gland Assemblies
Tubing systems that are subject to extreme vibration or shock, such as mobile pressure systems or long
tubing runs culminating at a compressor, will benefit from the use of High Pressure Equipment Company's
Anti-Vibration Gland Assemblies. These assemblies utilize the same reliable connection geometries as the
standard HiP fittings, with the added benefit of essentially unlimited vibrational fatigue life.
A coned and threaded tube, when subjected to unusual or excessive vibration, may fail prematurely and
break at the last thread. The Anti-Vibration Gland Assembly acts to move the fulcrum of vibration away from
the threaded portion of the tube and onto the strong, solid wall of the tubing. A wedge-like collet firmly holds
the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leak-free
connection between the tube and the connection seat.

Medium Pressure Anti-Vibration Gland Assemblies

Pressure
Rating
Catalog No. psi Connections A B C
A 20-3LM4 20,000 1
/4" MEDIUM PRESSURE 5
/8" /2"
1
17/16"
20-3LM6 20,000 3
/8" MEDIUM PRESSURE 3
/4" /8"
5
15/8"
20-3LM9 20,000 9
/16" MEDIUM PRESSURE 1" /8"
7
17/8"
20-3LM12 20,000 3
/4" MEDIUM PRESSURE 1 /4"
1
11/8" 2 1/8"
20-3LM16 20,000 1" MEDIUM PRESSURE 1 /2"
1
1 /8"
3
2 1/2"

C
Anti-Vibration Components
B Tubing Slotted Collet Collet
Size Collet Gland Body Collar

1
/4" 2-8769 2-8770 2-8768 20-2L4

3 "
/8 2-8772 2-8773 2-8771 20-2L6

9
/16" 2-8775 2-8776 2-8774 20-2L9

3 "
/4 2-8778 2-8779 2-8777 20-2L12

1" 2-8781 2-8782 2-8780 20-2L16

3.8
Medium Pressure Tubing
Tubing is cold drawn, seamless, and is supplied in the 1/8 hard condition (not annealed). Tensile strength is approximately
40 percent higher than that of annealed tubing. All tubing is manufactured in strict accordance with High Pressure Equipment
Company specifications to insure tolerances and bore quality. Tubing is stocked in lengths of 18 to 22 feet but may be ordered
in shorter lengths with no additional cutting charge.

Working Type of Catalog

Tubing Size Pressure psi Connection Used Material Order Number
1
/4" 1
/4" O.D. x 0.109" I.D. 20,000 1
/4" MEDIUM PRESSURE (LF4) 316 SS 20-9M4-316

3 "
/8 3
/8" O.D. x 0.203" I.D. 20,000 3
/8" MEDIUM PRESSURE (LF6) 316 SS 20-9M6-316

9
/16" O.D. x 0.359" I.D. 10,000 316 SS 10-9M9-316
9
/16" 9
/16" O.D. x 0.312" I.D. 20,000
9
/16" MEDIUM PRESSURE (LF9)
304 SS 20-9M9-304
316 SS 20-9M9-316
3
/4" O.D. x 0.516" I.D. 10,000 10-9M12-316
3
/4" 3
/4" MEDIUM PRESSURE (LF12) 316 SS
3
/4" O.D. x 0.438" I.D. 20,000 20-9M12-316

1" O.D. x 0.688" I.D. 10,000 10-9M16-316

1" 1" MEDIUM PRESSURE (LF16) 316 SS
1" O.D. x 0.562" I.D. 20,000 20-9M16-316

11/2" 11/2" O.D. x 0.937" I.D. 15,000 11/2" MEDIUM PRESSURE (LF24) 316 SS 15-9M24-316

Nipples
Nipples are stocked in 316 stainless steel. Nipples
in lengths other than those shown are supplied upon
request. Nipples are not furnished with collars and
glands, unless specified at time of order.

Coned and Threaded Nipples

Tubing Size (O.D. x I.D.)
Length /4" O.D. x
1 3
/8" O.D. x /16" O.D. x
9 3
/4" O.D. x
3
/4" O.D. x 1" O.D. x 1" O.D. x 11/2" O.D. x
7
/64" I.D. 13
/64" I.D. 5
/16" I.D. 33
/64" I.D.
7
/16" I.D. 11
/16" I.D. 9
/16" I.D. 15
/16" I.D.
psi 20,000 psi 20,000 psi 20,000 psi 10,000 psi 20,000 psi 10,000 psi 20,000 psi 15,000 psi
2 /4"
3 20-LM4-2.75
3" 20-LM6-3
4" 20-LM9-4 10-LM12-4
6" 20-LM4-6 20-LM6-6 20-LM9-6 10-LM12-6 20-LM12-6 10-LM16-6 20-LM16-6 15-LM24-6
8" 20-LM4-8 20-LM6-8 20-LM9-8 10-LM12-8 20-LM12-8 10-LM16-8 20-LM16-8 15-LM24-8
10" 20-LM4-10 20-LM6-10 20-LM9-10 10-LM12-10 20-LM12-10 10-LM16-10 20-LM16-10 15-LM24-10
12" 20-LM4-12 20-LM6-12 20-LM9-12 10-LM12-12 20-LM12-12 10-LM16-12 20-LM16-12 15-LM24-12

3.9
High Pressure Equipment Company R5 2/14
2955 W. 17th Street • Erie, PA 16505 U.S.A. • Phone: (814) 838-2028 • 1-800-289-7447 • Fax: (814) 838-6075 • Website: www.HighPressure.com
 High Pressure Equipment
Medium Pressure Connections Tubing Gland Collar
(Coned and Threaded) 20,000 psi service Materials. All of the components
required for make-up of a Medium
The Medium Pressure tubing connection is available for 1/4", 3/8", 9/16" 3/4", and 1" O.D.
tubing. The tubing may be prepared with the use of tooling (see tooling section 9.0) Pressure connection (glands, collars
and plugs) are produced in Type
or prepared at the factory to specified lengths. Additionally, standard length coned 316 stainless steel.
and threaded nipples are available from stock (see page 3.9).
Glands and collars. All valves
This connection has become an industry standard for use at elevated pressures and fittings are provided (except
and temperatures in both liquid and gas applications. It may be disassembled and nipples) unless otherwise requested.
retightened indefinitely. The threads of the gland are right-hand while the threads of (See chart on the right for size
the collar and tubing are left-hand to prevent rotation of the collar during assembly. details and catalog numbers).
20,000 psi
LF4
1/4" O.D. Tubing
LF6
3/8" O.D. Tubing
LF9
9/16" O.D. Tubing 3
LF12 LF16 LF24
/4" O.D. Tubing 1" O.D. Tubing 11/2" O.D. Tubing
3/4" - 14 NPSM 1- 3/8" - 12 TH'D 1- 7/8" – 12" Thread
Female Opening Detail 9/16" - 18 13/16" - 16
7/16" - 20
3/4" 15/16"
5/8" 60° 60° 60° 1- 5/16" 60° 1- 5/8"
1/2"
60°
60°

1/8" 7/32" 23/64" 33/64" 15/16"

3/16" 11/16" 1- 3/8"
5/16" 1/2" 5/8"
LF4 LF6 LF9 LF12 LF16 7/8" LF24
1- 3/8" HEX 1- 7/8" Hex
Gland 7/8" 1- 1/8" HEX
5/8"
1/2"

13/16" 1-1/16" 1- 1/2" 2

11/16" 1- 1/8"

9/16" - 18
7/16" - 20 13/16" - 16 3/4" - 14 NPSM
1- 3/8" 12 1- 7/8" – 12" Thread
20-2LM4 20-2LM6 20-2LM9 20-2LM12 20-2LM16 15-2LM24
1- 1/4" 1-3/4"
Collar 3/8" -24 L.H. 9/16" -18 L.H. 3/4" -16 L.H. 1"-14 L.H. 1- 1/2" –12 L.H.
1/4"-28 L.H.
1/4" 5/16" 3/8" 1/2" 1/2"
7/32"
3/8" 15/32" 23/32" 15/16"
20-2L4 20-2L6 20-2L9 20-2L12 20-2L16 15-2L24
Plug 9/16"
3/8"
1-9/16" 2"
1/4"
1-1/8"
1-1/4" 1-9/16" 2-3/8" 2-15/16"
1"
1-3/4"

3/8" 15/32"
23/32" 9/16" 23/32" 1-1/16"
20-7LM4 20-7LM6 20-7LM9 20-7LM12 20-7LM16 15-7LM24
Tube End Prep
59° 59° 59°
59° 59° 59°

7/16" 1/2" 25/32" 15/16"

11/32" 5/8"
9/64" 1/4" 13/32" 9/16" 15/16"
9/16" 1-1/16"
1/4" - 28 L.H. 3/8" - 23/32" I.D.
24 L.H. 9/16" - 18 L.H. 3/4" - 16 L.H. 1" - 14 L.H. 1-1/2 " – 12 L.H.
LM4 LM6 LM9 LM12 LM16 LM24

3.A
Appendix R3 4/14