Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
0% found this document useful (0 votes)
9 views4 pages

Ds 30325

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 4

DDTA (R1 = R2 SERIES) UA

PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR

Features
• Epitaxial Planar Die Construction A SOT-323
• Complementary NPN Types Available (DDTC)
Dim Min Max
• Built-In Biasing Resistors, R1 = R2
• Lead Free/RoHS Compliant (Note 2) A 0.25 0.40
• "Green" Device, Note 3 and 4 B C B 1.15 1.35
C 2.00 2.20
Mechanical Data
D 0.65 Nominal
• Case: SOT-323 G
E 0.30 0.40
• Case Material: Molded Plastic, "Green" Molding H
Compound, Note 4. UL Flammability Classification G 1.20 1.40
Rating 94V-0 K H 1.80 2.20
M
• Moisture Sensitivity: Level 1 per J-STD-020C J 0.0 0.10
• Terminal Connections: See Diagram
K 0.90 1.00
• Terminals: Solderable per MIL-STD-202, Method 208 J
D E L L 0.25 0.40
• Lead Free Plating (Matte Tin Finish annealed over
Alloy 42 leadframe). M 0.10 0.18
• Marking Information: See Page 4 α 0° 8°
• Type Code: See Table Below
All Dimensions in mm
• Ordering Information: See Page 4 OUT

• Weight: 0.006 grams (approximate) 3


C

IN B C OUT
B R1 1 3
P/N R1, R2 (NOM) Type Code
DDTA123EUA 2.2KΩ P04 R2

DDTA143EUA 4.7KΩ P08

2
E
DDTA114EUA 10KΩ P13
1 2 E
DDTA124EUA 22KΩ P17
DDTA144EUA 47KΩ P20 IN GND(+)
GND (+)
DDTA115EUA 100KΩ P24
Schematic and Pin Equivalent Inverter Circuit
Configuration

Maximum Ratings @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit


Supply Voltage, (3) to (2) VCC -50 V
Input Voltage, (1) to (2) DDTA123EUA +10 to –12
DDTA143EUA +10 to –30
DDTA114EUA +10 to –40
VIN V
DDTA124EUA +10 to –40
DDTA144EUA +10 to –40
DDTA115EUA +10 to –40
Output Current DDTA123EUA -100
DDTA143EUA -100
DDTA114EUA -50
IO mA
DDTA124EUA -30
DDTA144EUA -30
DDTA115EUA -20
Output Current All IC (Max) -100 mA
Power Dissipation Pd 200 mW
Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C

Notes: 1. Mounted on FR4 PC Board with recommended pad layout as shown on Diodes Inc., suggested pad layout document AP02001, which can be found on
our website at http://www.diodes.com/datasheets/ap02001.pdf
2. No purposefully added lead.
3. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
4. Product manufactured with date code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to date
code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants.

DS30325 Rev. 8 - 2 1 of 4 DDTA (R1 = R2 SERIES) UA


© Diodes Incorporated
www.diodes.com
Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Min Typ Max Unit Test Condition

Vl(off) -0.5 -1.1 ⎯ V VCC = 5V, IO = 100μA


VO = 0.3V, IO = 20mA, DDTA123EUA
VO = 0.3V, IO = 20mA, DDTA143EUA
Input Voltage
VO = 0.3V, IO = 10mA, DDTA114EUA
Vl(on) ⎯ -1.9 -3 V
VO = 0.3V, IO = 5mA, DDTA124EUA
VO = 0.3V, IO = 2mA, DDTA144EUA
VO = 0.3V, IO = 1mA, DDTA115EUA
IO/Il =10mA/0.5mA, DDTA123EUA
IO/Il =10mA/0.5mA, DDTA143EUA
IO/Il =10mA/0.5mA, DDTA114EUA
Output Voltage VO(on) ⎯ -0.1 -0.3 V
IO/Il =10mA/0.5mA, DDTA124EUA
IO/Il =10mA/0.5mA, DDTA144EUA
IO/Il =5mA/0.25mA, DDTA115EUA
DDTA123EUA -3.8
DDTA143EUA -1.8
DDTA114EUA -.88
Input Current Il ⎯ ⎯ mA VI = -5V
DDTA124EUA -.36
DDTA144EUA -.18
DDTA115EUA -.15
Output Current IO(off) ⎯ ⎯ 0.5 μA VCC = -50V, VI = 0V
DDTA123EUA -20 VO = -5V, IO = -20mA
DDTA143EUA -20 VO = -5V, IO = -10mA
DDTA114EUA -30 VO = -5V, IO = -5mA
DC Current Gain Gl ⎯ ⎯ ⎯
DDTA124EUA -56 VO = -5V, IO = -5mA
DDTA144EUA -68 VO = -5V, IO = -5mA
DDTA115EUA -82 VO = -5V, IO = -5mA
Input Resistor (R1) Tolerance ΔR1 -30 ⎯ +30 % ⎯

Resistance Ratio R2/R1 0.8 1 1.2 ⎯ ⎯


V = -10V, IE = 5mA,
Gain-Bandwidth Product* fT ⎯ 250 ⎯ MHz CE
f = 100MHz
* Transistor - For Reference Only

DS30325 Rev. 8 - 2 2 of 4 DDTA (R1 = R2 SERIES) UA


© Diodes Incorporated
www.diodes.com
Typical Curves –DDTA143EUA
250 1

VCE(SAT), COLLECTOR EMITTER VOLTAGE (V)


IC/IB = 10
Pd, POWER DISSIPATION (mW)

200

75°C
0.1
-25°C
150
25°C

100
0.01

50

0 0.001
-50 0 50 100 150 0 10 20 30 40 50
TA, AMBIENT TEMPERATURE (°C) IC, COLLECTOR CURRENT (mA)
Fig. 1 Derating Curve Fig. 2 VCE(SAT) vs. IC

1,000 12
f = 1MHz

10
COB, CAPACITANCE (pF)
hFE, DC CURRENT GAIN

100 8

10 4

1 0
1 10 100 0 5 10 15 20 25 30
IC, COLLECTOR CURRENT (mA) VR, REVERSE BIAS VOLTAGE (V)
Fig. 3 DC Current Gain Fig. 4 Output Capacitance

100 10
VO = 5V VO = 0.2V
75°C
25°C
IC, COLLECTOR CURRENT (mA)

10
Vin, INPUT VOLTAGE (V)

-25°C

1 1

0.1

0.01 0
0 1 2 3 4 5 6 7 8 9 10 0 10 20 30 40 50
Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA)
Fig. 5 Collector Current vs. Input Voltage Fig. 6 Input Voltage vs. Collector Current

DS30325 Rev. 8 - 2 3 of 4 DDTA (R1 = R2 SERIES) UA


© Diodes Incorporated
www.diodes.com
Ordering Information (Note 4 & 5)
Device Packaging Shipping
DDTA1xxEUA-7-F SOT-323 3000/Tape & Reel
DDTA1xxEUA-13-F SOT-323 10,000/Tape & Reel
Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.

Marking Information

XXX = Product Type Marking Code, See Table on Page 1

YM
YM = Date Code Marking
XXX Y = Year ex: T = 2006
M = Month ex: 9 = September

Date Code Key


Year 2006 2007 2008 2009 2010 2011 2012
Code T U V W X Y Z

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Code 1 2 3 4 5 6 7 8 9 O N D

IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product
described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,
harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written
approval of the President of Diodes Incorporated.

DS30325 Rev. 8 - 2 4 of 4 DDTA (R1 = R2 SERIES) UA


© Diodes Incorporated
www.diodes.com

You might also like