Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Desmodur TG2xx Based Systems

    Uploaded by

    Kris Szong

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Desmodur TG2xx Based Systems

    Uploaded by

    Kris Szong
    13 views2 pages

    Original Title

    Desmodur TG2xx based systems

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views2 pages

    Desmodur TG2xx Based Systems

    Uploaded by

    Kris Szong

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DESMODUR® TG2xx + BAYTEC® XL 1705 85 à 95 Shore A

    NATURE OF COMPONENTS
    Prepolymer nature Nature of chain extender and other components
    TDI - PPG BAYTEC® XL 1705 Amine chain extender

    CHARACTERISTICS OF COMPONENTS
    DESMODUR® DESMODUR® DESMODUR® DESMODUR®
    Unit BAYTEC® XL 1705
    TG244 TG250 TG256 TG263
    % NCO % 4.35 (± 0.2) 5.35 (± 0.2) 5.90 (± 0.2) 6.25 (± 0.2) -

    Physical appearance at room temperature - liquid liquid liquid liquid liquid

    Processing temperature °C 70 70 70 70 30

    Viscosity at processing temperature cps 1000 600 600 1200 300

    Specific gravity at processing temperature - 1.01 1.02 1.04 1.06 1.21

    ELASTOMER TYPICAL PROPERTIES (DATA GIVEN AS AN INDICATION)


    Prepolymer DESMODUR® TG244 DESMODUR® TG250 DESMODUR® TG256 DESMODUR® TG263
    Chain extender BAYTEC® XL 1705 BAYTEC® XL 1705 BAYTEC® XL 1705 BAYTEC® XL 1705
    Hardness at 23°C ISO 48-4 Shore 85 A 90 A 92 A 95 A
    10% Modulus DIN 53504 MPa 2.7 3.4 4.3 6.4
    100% Modulus DIN 53504 MPa 7.7 9.5 11.7 15.1
    200% Modulus DIN 53504 MPa 9.5 11.3 14.0 19.2
    300% Modulus DIN 53504 MPa 11.2 13.3 17.2 24.4
    Tensile strength DIN 53504 MPa 25 25 26 30
    Elongation DIN 53504 % 550 500 420 370
    Tear strength : without nick ISO 34-1 kN/m 84 88 92 105
    Tear strength : with nick ISO 34-1 kN/m 35 37 40 50
    Resilience DIN 53512 % 35 34 32 29
    Abrasion loss ISO 4649 mm³ 40 45 45 45
    Compression set (deflection / 22 h / 70 °C) ISO 815-1 % 46 46 47 53
    Hardness at -5°C ISO 48-4 Shore 90 A 94 A 97 A 99 A
    Hardness at 80°C ISO 48-4 Shore 86 A 89 A 91 A 93 A
    Specific gravity 1.11 1.12 1.12 1.14
    Depending on process conditions, curing and post curing temperature, hardness may vary from ± 2 Shore A.
    Labelling : This system data sheet is only valid in combination with the corresponding components current safety data sheets ! Any updating of safety relevant information – in accordance with EU directives – will only be reflected in
    the Safety Data Sheets, copies of which will be revised and distributed. For further technical information relating to safety, the Safety Data Sheets should be consulted.
    Covestro Elastomers SAS - 46, avenue des Allobroges - BP 116 - 26103 Romans cedex - France - Tel. 33 (0)4 75 72 72 75 - Fax 33 (0)4 75 02 11 73 - E-mail: info.elastomers@covestro.com – www.elastomers.covestro.com
    Covestro Elastomers SAS is certified ISO 9001 : 2008
    version 04
    DESMODUR® TG2xx + BAYTEC® XL 1705 85 à 95 Shore A

    STORAGE AND USE PRECAUTIONS


    Unit DESMODUR® TG244 DESMODUR® TG250 DESMODUR® TG256 DESMODUR® TG263 BAYTEC® XL 1705
    Optimal storage temperature of the drums °C < 30 < 30 < 30 < 30 < 30
    Storage time (sealed drum) Month 12 12 12 12 12
    PREPARATION BEFORE PROCESSING
    Preheating time / preheating temperature hr / °C 12 / 60 -
    Homogenization before processing required - no no no no no
    Degassing required - yes yes yes yes no

    Keep from heat and protect against moisture.

    PROCESSING
    Prepolymer DESMODUR® TG244 DESMODUR® TG250 DESMODUR® TG256 DESMODUR® TG263
    Chain extender BAYTEC® XL 1705 BAYTEC® XL 1705 BAYTEC® XL 1705 BAYTEC® XL 1705
    Hardness Shore 85 A 90 A 92 A 95 A
    Prepolymer processing temperature °C 70
    BAYTEC® XL 1705 processing temperature °C 30
    Parts by weight of prepolymer 100 100 100 100
    Parts by weight of BAYTEC® XL 1705 10.5 12.9 14.3 15.1
    MOLDING AND CURING
    Mold temperature °C 100
    Pot life (400g mixture) min 5’ 3’ 2’40’’ 2’10’’
    Demolding time min 40’ 30’ 30’ 20’
    Post-curing hr / °C 16 / 100

    Use of degassing agent is recommended for hand casting.


    A one week aging at room temperature is required to obtain the optimal properties of the elastomer.

    The following information and our technical advice – whether verbal, in writing or by way of trials – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice
    does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by
    you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our advice concerning safety does not release you from the obligation to determine the safety measures designed for
    your production environment, that we may not be able to anticipate, to check abilities and to inform the people who will use, handle or be in contact with these products.

    Covestro Elastomers SAS - 46, avenue des Allobroges - BP 116 - 26103 Romans cedex - France - Tel. 33 (0)4 75 72 72 75 - Fax 33 (0)4 75 02 11 73 - E-mail: info.elastomers@covestro.com – www.elastomers.covestro.com
    Covestro Elastomers SAS is certified ISO 9001 : 2008
    version 04

    You might also like