DGC1B e

TM
SERVICE MANUAL
DGC1B(Control Unit: DKC60RCD)
CONTENTS
PROTECTION OF EYES
FROM LASER BEAM DURING SERVICING .............. 3
SPECIFICATIONS .................................................................... 4
PANEL LAYOUT ....................................................................... 6
CIRCUIT BOARD LAYOUT ...................................................... 9
DISASSEMBLY PROCEDURE ............................................... 10
LSI PIN DESCRIPTION .......................................................... 26
IC BLOCK DIAGRAM ............................................................. 35
CIRCUIT BOARDS ................................................................. 38
TEST MODE ........................................................................... 53
MAINTENANCE MODE (MENU) ............................................ 58
ERROR MESSAGES .............................................................. 63
PEDAL ADJUSTMENT PROCEDURE (MK#) ...................... 64
DIP SWITCH ON MN BOARD ................................................ 64
WRITING NEW PROGRAM TO FLASH MEMORY ............... 65
RESETTING YOUR DISKLAVIER .......................................... 68
TROUBLESHOOTING ............................................................ 70
MIDI IMPLEMENTATION CHART .......................................... 73
MIDI DATA FORMAT .............................................................. 74
PARTS LIST
BLOCK DIAGRAM
WIRING
OVERALL CIRCUIT DIAGRAM
PP 008612 HAMAMATSU, JAPAN

Copyright (c) Yamaha Corporation. All rights reserved. PDF ’06.11
DGC1B
IMPOR TANT NOTICE

This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed
that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and under-
stood by the users, and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components and failure of the product to perform as specified. For
these reasons, we advise all Yamaha product owners that all service required should be performed by an
authorized Yamaha Retailer or the appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certifi-
cation, recognition of any applicable technical capabilities, or establish a principal-agent relationship of
any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and
service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor’s Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to
this bus.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power
to the unit.
WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT
SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
148EX
2
DGC1B
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
The Control Unit is classified as a Class 1 laser product. One of the labels below is located on the inside of the CD drive unit.
Top cover
CLASS 1 LASER PRODUCT

LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
APAREIL A LASER DE CLASSE 1
EN60825
1/2" CD-ROM
Bottom chassis
Laser Diode Properties

* Material: GaAlAs
* Wavelength: 790/795 nm
* Laser Output Power at the lens of the Laser Pick Up Unit: max. 0.34 mW
3
DGC1B
This set employs a laser. Therefore, be sure to carefully follow the instructions below when servicing.
When checking the laser diode emission, keep your eyes more than 30 cm away from the objective lens.
WARNING Laser Safety

This product contains a laser beam component. This component may emit invisible, as well as visible
radiation, Which may cause eye damage. To protect your eyes and skin from laser radiation, the following
precaution must be used during servicing of the unit.
1) When testing and / or repairing any component within the product, keep your eyes and skin more than
30 cm away from the laser pick-up unit at all time. Do not stare the laser beam at any time.
2) Do not attempt readjustment, disassemble and repair of the laser pick-up, unless noted elsewhere in
this manual.
3) CAUTION - Use of controls or readjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Do not disassemble the CD drive unit.
SPECIFICATIONS
Key Sensors Single-beam, optical, incremental (GP)
Sensor System Sustain & shift: incremental, position-sensing, optical
Pedal Sensors
Sostenuto (GP): on/off, optical
Keys 16-note polyphonic
Drive System
Pedals Sustain & shift: incremental response
4 MB x 16 flash memory disks (64 MB (Maximum)); up to 9
Internal Memory
Data Storage groups and 99 program sets; built-in calendar/clock/timer
File Format Standard MIDI File (format 0, 1) / E-SEQ
Removable Floppy Disk 3.5" 2DD (720 KB) or 2HD (1.44 MB) floppy disk
Media Compact Disc Yamaha PianoSoft . PlusAudio, audio CD
Main Display Song number plus 24-character x 2-line LCD
Function Indicators LEDs, including drive/disk number indicator
Drive CD and floppy disk
Control Unit
Switches Power, Host Select (MIDI, PC1, PC2, Mac)
Dimensions (WHD) 227 x 87 x 180 mm (9" x 3 1/2" x 7")
Weight 2.2 kg (4.8 lbs)
Amplification 60W x 2; tone and volume controls
(GP) Speakers 16 cm (6 1/4") woofer x 2, 2.5 cm (1") tweeter x 2
Outlet Box
AC Outlet x 2, Main Switch, Output Jack x 2
(UP)
MIDI In/Out, AUX In/Out (R, L/Mono),
Connectors To Host (serial port), To Piano, CD Control,
Audio/Analog MIDI In, Foot Controller
4
DGC1B
Type Advanced Wave Memory 2 (AWM2)

Polyphony 32-note max.
Ensemble Parts 16
Ensemble Tone Voice Module Modes XG,GM
Normal Voices 676 (480 selectable)
Drum Voices 21 kits total (11 selectable)
Set at A=440, tunable –50 cents in 1-cent steps
Pitch
(in unison with digital piano tone)
SmartKey Capability Yes
Power Source Local AC current
Wireless remote control unit w/batteries, PianoSoft sample disk,
Supplied Accessories CD software, blank 3.5" 2HD floppy disk, owner’s manuals,
control unit suspension bracket (GP),
Optional Accessories FC-4, FC-5 foot switches, FC-7 foot controller
Function & Controls

Media Select Floppy disk, Memory Disks (1 to 16),CD
Song Select Rev/fwd, song by song; numerical selection
Playback Music Search Rev/fwd, w/ or w/o sound; direct by time or measure
Functions Repeat Disk, song, random, segment A~B, segmentA~
Programming 9 disk groups, 99 program sets, chain play, timer play
Others L/R part select, auto start, space playbacK
Volume 11 levels (0 ~ -10)
Tempo -50 ~ +20 in 1 % steps
Playback
Transposition –24 semitones (2 octaves) in 1-semitone steps
Controls
Balance Balancing volume of ensemble voices and piano
Others Keyboard cancel, pedal cancel, pedal count-in
Tracks 16 (including 2 for piano)
Recording L/R Dual Recording Separate L/R or assignable split point
Functions Quantize 1/4, 1/6, 1/8, 1/12, 1/16 of a quarter note
Others Re-recording
Range 30 ~ 400 beats per minute
Metronome Time Signatures 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 8/4, 9/4
Function Audible (tick, on/off), visual (LEDs)
Editing
Track Mix, move, copy, delete, transpose
Functions
Copy, sort, delete, type convert (SMF, E-SEQ, earlier Disklavier),
Song
time format convert
Utility Disk Format, copy, type convert
Functions Calendar/Clock/Timer Current time display, time/date stamp for recording
Disk: 64 characters max.
Title Entry
Song: 32 characters max.
Specifications are subject to change without prior notice.
5
DGC1B
PANEL LAYOUT
Amplifier, Speakers & Foot Controller

Foot Controller connector Amplifier
(see illustration below)
i
MAINS
AUX OUT AUX IN VOLUME BASS TREBLE

L/L+R R L/L+R R
Mounted underneath
Mounted underneath
Mounted underneath
Amplifier Panel q w
MAINS
AUX OUT AUX IN VOLUME BASS TREBLE

L/L+R R L/L+R R
e r t y u
q AC LINE INLET y BASS knob

w MAINS (ON/OFF) switch u TREBLE knob
e AUX OUT L/L+R, R connectors i Foot Controller connector
r AUX IN L/L+R, R connectors o Amplified speakers
t VOLUME knob
6
DGC1B
Control Unit
Front Panel
q w e r t y u i o
DRIVE SELECT
PLAY/PAUSE STOP REC SONG SELECT/REV • FWD ENTER VOLUME ••• -10 -8 -6 -4 -2 0
TEMPO
TRANSPOSE -/NO +/YES
METRO-
PART VOICE FUNC. NOME BALANCE
STANDBY
ON L R
!0 !1 !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2
q [STANDBY/ON] button !2 [REC] button

w Remote control sensor !3 [SONG SELECT/REV • FWD] buttons
e Display (LCD) !4 PART [L] [R] buttons
r DRIVE indicator !5 [ENTER] button
t [SELECT] buttons !6 [VOICE] button
y CD drive !7 [[] [a] cursor buttons
u CD eject button !8 [FUNC.] button
i Floppy disk drive !9 [METRONOME] button
o Floppy disk eject button @0 Selector button
!0 [PLAY/PAUSE] button @1 [–/NO] [+/YES] buttons
!1 [STOP] button @2 LED volume level indicators
Rear Panel q w
CD CONTROL R L
AUDIO/ANALOG MIDI IN
OUT MIDI IN
TO HOST HOST SELECT TO CONTROL CABLE
FOR PIANO
PC1 PC2
MIDI MAC
e r t y u
q CD CONTROL connector t TO CONTROL CABLE FOR PIANO connector

w AUDIO/ANALOG MIDI IN R, L connector y MIDI OUT connector
e TO HOST (serial port) connector u MIDI IN connector
r HOST SELECT switch(MIDI/PC1/PC2/MAC)
7
DGC1B
Remote Controller
q [RECORD] button
w Number keypad *
e [REPEAT] button *
RECORD PART SELECT
q L R !0 r [A-B] button *
1 2 3
SEARCH
!1 t [REV • FWD] buttons
w 4 5 6
DRIVE
!2 y [SONG SELECT] buttons
7 8 9 0
u [PLAY] button
REPEAT TRANSPOSE i [PAUSE] button
e 0 + !3
A-B TEMPO o [STOP] button
r 0 + !4
REV FWD VOLUME
!0 [PART SELECT] buttons
t + !5 !1 [SEARCH] button
SONG SELECT !2 [DRIVE] button
y
PLAY PAUSE STOP
!3 [TRANSPOSE] buttons
u o !4 [TEMPO] buttons
PPR-102E
!5 [VOLUME] buttons
* Available on the remote control, but not on the

Control Unit.
8
DGC1B
CIRCUIT BOARD LAYOUT
Bottom view MA120 assembly
MA120
MN
DB
Power transformer
Amplifier unit
NF
PWB
FU
JACK1
Speaker box assembly NW
(Right)
Speaker box assembly
NW
(Left)
DRIVE B
Key drive unit
PK-CTL DRIVE A
Control assembly DRIVE A
CTRL G DRIVE C
Right side view
Action unit
Key Sensor unit

KEY SENSOR
Key drive unit
Control assembly Pedal drive unit
PEDAL DRIVE
9
DGC1B
DISASSEMBLY PROCEDURE
1. Control Unit (Time required: About 2 minutes)

1-1 Loosen the two (2) screws marked [A]. The D-SUB
CD-SWP Connector
connector can then be removed. (Fig.1)
1-2 Remove the four (4) screws marked [H11G]. The
control unit can then be removed. (Fig.1)
Warning:
Use the four (4) screws marked [H11G] when you
[H11G] [A]
install the control unit in the hanger. Use the
screw of original [C301G] when you gain the top [A]
cover because it is moved with the simple Control unit
D-SUB Connector
substance through the control unit. If you use Hanger
different screws, it will damage the inside [H11G]
component. (Fig.1,2)
[H11G]: Flat Head Screw 4.0X10 MFZN2B3 (WG489400)
(Fig.1)
• Control Unit (DKC60RCD)
2. Top Cover CD 5. DSP Circuit Board

(Time required: About 4 minutes) (Time required: About 7 minutes)
2-1 Remove the control unit. (See procedure 1.) 5-1 Remove the control unit. (See procedure 1.)
2-2 Remove the four (4) screws marked [C101G], the 5-2 Remove the top cover CD. (See procedure 2.)
four (4) screws marked [C301G] and the three (3) 5-3 Remove the 1/2" CD-ROM. (See procedure 3.)
screws marked [C302G]. The top cover CD can then 5-4 Remove the screw marked [C232G] and the two (2)
be removed. (Fig.2, Photo.3) screws marked [C234G]. The DSP circuit board can
then be removed. (Fig.2, Photo.1,3)
3. 1/2" CD-ROM (Time required: About 6 minutes)
3-1 Remove the control unit. (See procedure 1.) 6. Panel (Time required: About 5 minutes)
3-2 Remove the top cover CD. (See procedure 2.) 6-1 Remove the control unit. (See procedure 1.)
3-3 Remove the two (2) screws marked [C201G] and 6-2 Remove the top cover CD. (See procedure 2.)
the two (2) screws marked [C231G]. The CD base 6-3 Remove the screw marked [C102G]. The panel can
can then be removed with the 1/2" CD-ROM from then be removed. (Fig.2)
the top cover CD. (Fig.2, Photo.1)
3-4 Remove the four (4) screws marked [C211G]. The 7. CD PANEL Circuit Board
1/2" CD-ROM can then be removed from the CD (Time required: About 6 minutes)
base. (Fig.2, Photo.1) 7-1 Remove the control unit. (See procedure 1.)
7-2 Remove the top cover CD. (See procedure 2.)
4. ATAPI (DA) Circuit Board 7-3 Remove the panel. (See procedure 6.)
(Time required: About 7 minutes) 7-4 Remove the three (3) screws marked [C141G]. The
4-1 Remove the control unit. (See procedure 1.) CD PANEL circuit board can then be removed. (Fig.2)
4-3 Remove the 1/2" CD-ROM. (See procedure 3.)
4-4 Remove the two (2) screws marked [C222G]. The
ATAPI (DA) circuit board can then be removed from
the 1/2" CD-ROM. (Fig.2, Photo.1)
10
DGC1B
Top cover CD [C302G] [C232G]

[C302G]
[C301G] ATAPI (DA)
[C222G]
DSP
1/2" CD-ROM
& DSP
Upper side shield cover
ATAPI (DA) [C231G]
[C211G] [C222G] [C211G] [C232G]
[C201G]
[C301G]
[C201G] CD base
[71G] [C211G]
[C234G]
[C211G]
CD base [C231G]
DSP
1/2" CD-ROM [C211G] [C231G] [C234G] FDD
[43G]
(Photo.1) FDD base
Lower side [43G]
CONTROLLER (CTRL)
[43G] [71G]
[72G]
CONTROLLER
(CTRL)
FDD [73]
[C141G] [41GA]
[C101G] [61GA]
[C102G] [41GA]
[71G]
FDD
base
[74G]
[43G] [74G] [61GA] [72G]
Transistor holder
[43G] [73] CD PANEL
Bottom chassis
(Photo.2)
Rear view Sounder assembly
Top cover CD [C302G] Panel

[C232G] [21G]
Panel unit CD
[C302G] [74G] [61GA] [73] [72G]

[C302G] Control Unit (DKC55CD)
[21G]
(Photo.3)
[73]: Lock Screw RDG-LNA-W1(01) (VN632900) [C141G]: Bind Head Tapping Screw-P 2.6X8 MFZN2W3 (WF267300)
[21G]: Flat Head Tapping Screw-S 3.0X6 MFZN2B3 (WE986900) [C201G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800)
[41GA]: Screw 3X7X3 MFZN2-W3 (WG000800) [C211G]: Bind Head Screw 2.0X2.5 MFZN2W3 (WG487100)
[43G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800) [C222G]: Bind Head Screw 2.0X6 MFZN2W3 (WG487600)
[61GA]: Bind Head Screw 3.0X10 MFZN2B3 (WF304400) [C231G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800)
[71G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800) [C232G]: Bind Head Tapping Screw-P 3.0X12 MFZN2B3 (WF507300)
[72G]: Bind Head Tapping Screw-P 3.0X12 MFZN2B3 (WF507300) [C234G]: Bind Head Tapping Screw-S 3.0X8 MFZN2W3 (WE972100)
[74G]: Bonding Tapping Screw-C 3.0X6 MFZN2B3 (WG488600) [C301G]: Flat Head Screw 4.0X10 MFZN2B3 (WG489400)
[C101G]: Flat Head Tapping Screw-S 3.0X5 MFZN2B3 (WG489200) [C302G]: Bonding Tapping Screw-C 3.0X6 MFZN2B3 (WG488600)
[C102G]: Flat Head Tapping Screw-P 3.0X8 MFZN2B3 (WG489100)
(Fig.2)
11
DGC1B
8. Panel Unit CD (Time required: About 7 minutes) 11. FDD (Time required: About 8 minutes)
8-1 Remove the control unit. (See procedure 1.) 11-1 Remove the control unit. (See procedure 1.)
8-2 Remove the top cover CD. (See procedure 2.) 11-2 Remove the top cover CD. (See procedure 2.)
8-3 Remove the panel. (See procedure 6.) 11-3 Remove the panel unit CD. (See procedure 8.)
8-4 Remove the five (5) screws marked [21G]. The panel 11-4 Remove the three (3) screws marked [43G]. The
unit CD can then be removed. (Fig.2) FDD base can then be removed with the FDD. (Fig.2,
Photo.2)
9. PASW Circuit Board 11-5 Remove the four (4) screws marked [41GA]. The
(Time required: About 9 minutes) FDD can then be removed from the FDD base.
9-1 Remove the control unit. (See procedure 1.) (Fig.2, Photo.2)
9-3 Remove the panel unit CD. (See procedure 8.) 12. CONTROLLER (CTRL) Circuit Board
9-4 Remove the eight (8) screws marked [61GB]. The (Time required: About 10 minutes)
PASW circuit board can then be removed. (Fig.3) 12-1 Remove the control unit. (See procedure 1.)
10. LCD Assembly 12-3 Remove the panel unit CD. (See procedure 8.)
(Time required: About 8 minutes) 12-4 Remove the FDD base. (See procedure 11-4.)
10-1 Remove the control unit. (See procedure 1.) 12-5 Remove the screw marked [61GA], the three (3)
10-2 Remove the top cover CD. (See procedure 2.) screws marked [71G], the two (2) screws marked
10-3 Remove the panel unit CD. (See procedure 8.) [72G], the two (2) lock screws marked [73G] and
10-4 Remove the three (3) screws marked [51GA]. The the screw marked [74G]. The CONTROLLER
LCD assembly can then be removed. (Fig.3) (CTRL) circuit board can then be removed. (Fig.2,
Photo.2,3)
13. Sounder Assembly

(Time required: About 11 minutes)
13-1 Remove the control unit. (See procedure 1.)
13-3 Remove the panel unit CD. (See procedure 8.)
13-4 Remove the FDD base. (See procedure 11-4.)
13-5 Remove the sounder assembly, which is attached
[51GA] to the bottom chassis with adhesive tape. (Fig.2)
LCD assembly
[61GB]
PASW
Panel unit CD
[51GA]: Bind Head Tapping Screw-P 2.6X8 MFZN2B3 (WE973600)

[61GB]: Bind Head Tapping Screw-P 2.6X8 MFZN2B3 (WE973600)
(Fig.3)
12
DGC1B
14. Action Unit (Time required: About 5 minutes) 14-4 Lift up the key slip and pull out towards you. (Fig.6)
14-2 Position the key cover diagonally and pull towards
you to remove. (Fig.4)
Key cover
Key slip
(Fig.6)
14-5 Pull out the action unit towards you. (Fig.7)

The hammer can be damaged while removing
(Fig.4) the action unit and caution should be taken to
avoid touching the keys.
14-3 Remove the screws marked [B] on the left and right
Turn off the power before pulling out the action
sides. The end blocks at on both sides can then be
unit to avoid damaging the hammer.
removed. (Fig.5)
End block
End block
Action unit
[B]
(Fig.7)
[B]
(Fig.5)
15. Pedal Lyre Assembly

15-1 Remove the connector. (Photo.4) Connector
15-2 Loosen the two (2) screws marked [C]. The pedal
lyre assembly can then be removed. (Photo.4)
[C] x 2
Pedal lyre
assembly
(Photo.4)
13
DGC1B
16. Yoke Cover A (Time required: About 2 minutes) 17-5 Yoke cover B:
16-1 Remove the split pin for the sostenuto (base damper) 17-5-1 Remove the four (4) screws marked [151GC]. The
pedal lever. The pedal lever hook for the sostenuto yoke cover B can then be removed. (Fig.8)
(base damper) pedal can then be removed. (Fig.8, 17-6 Yoke cover C:
Photo.5) 17-6-1 Remove the four (4) screws marked [83S] and the
16-2 Remove the sostenuto (base damper) pedal lever. five (5) screws marked [151GD], and loosen the
(Fig.8, Photo.5, Photo.6) screw marked [151GE]. The yoke cover C can then
The damper lifting rod may fall during removal be removed with the drive holder. (Fig.8)
of the sostenuto (base damper) pedal lever and
so caution should be taken. 18 Yoke Cover D (Time required: About 1 minute)
16-3 Remove the five (5) screws marked [151GA] and 18-1 Remove the five (5) screws marked [151GF] and
loosen the screw marked [151GB]. (Fig.8) loosen the screw marked [151GG]. The yoke cover
16-4 Pull out the connector of the CTRL G circuit board D can then be removed. (Fig.8)
then remove the yoke cover A. (Fig.8, Photo.7)
17. Yoke Cover B and Yoke Cover C

(Time required: About 3 minutes each)
17-1 Remove the pedal lyre assembly. (See procedure 15.)
17-2 Rotate the pedal lever hook for the damper pedal.
(Fig.8, Photo.8)
17-3 Lower the damper pedal lever assembly. (Photo.8)
17-4 Remove the damper lifting rod. (Photo.9)
The damper lifting rod may fall when the damper
pedal lever assembly is lowered and so caution
should be taken.
Bottom view
Damper pedal lever assembly
[151GF] [151GD] [83S] [151GD] [151GC] [151GA]
[151GG]
Yoke cover C CTRL G [151GB]

[83S] [151GC]
Yoke cover D
Drive holder [151GE] Yoke cover B Yoke cover A
Sostenuto (Base damper)
pedal lever
[83S]: Truss Head Tapping Screw-1 4.0X30 MFZN2B3 (WF110100)

[151G]: Bind Head Screw 4.0X6 MFZN2B3 (WE878400)
(Fig.8)
14
DGC1B
Pedal lever hook

The split pin is attached to the The damper lifting
opposite side of the hook. Damper lifting rod Yoke cover C rod will be inside.
Damper pedal Yoke cover B

lever assembly
Pedal lever hook
Sostenuto (Base damper) Yoke cover A (Photo.8)

pedal lever
(Photo.5)
Yoke cover B
Damper lifting rod
Damper
lifting rod
Pedal lever
hook
Damper pedal Yoke cover C

lever assembly
Sostenuto (Base damper)
pedal lever
(Photo.6) (Photo.9)
CTRL G
Connector
Yoke cover A
(Photo.7)
15
DGC1B
19. Plunger Assembly and Coil Assembly

19-1 Remove the control unit. (See procedure 1.) Although the number of screws fastening the
19-2 Remove the action unit. (See procedure 14.) upper yoke and the location of the yoke cover to
19-3 Remove the yoke cover A. (See procedure 16.) be removed will be different, the plunger
19-4 The 4mm hexagonal wrench is used to remove the assembly and the coil assembly in other
five (5) screws marked [101G]. The upper yoke can locations can be removed in the same manner.
then be removed with the plunger assembly. (Fig.9, (Photo.10)
Fig.10, Photo.10, Photo.11) Loosen the five (5) screws marked [D] and lift
19-5 Remove the coil assembly. (Fig.9) up the damper stop rail before removing the
upper yoke in the back. (Fig.11)
[101G]
The felt of the plunger assembly will be white in
Plunger assembly
the front (towards you) and black in the back
Upper yoke (away from you). (Photo.10)
Coil assembly
[101G]: Cap Screw 4.0X40 MFZN2W3 (WG489900)
(Fig.9)
Top view
Remove the yoke cover A. Remove the yoke cover A, B, C. Remove the yoke cover C, D.
Plunger assembly x 13 Plunger assembly x 14 Plunger assembly x 17
[101G] x 5 Upper yoke [101G] x 5 Upper yoke [101G] x 6 Upper yoke
[101G] x 5 Upper yoke [101G] x 5 Upper yoke [101G] x 6 Upper yoke

Plunger assembly x 13 Plunger assembly x 14 Plunger assembly x 17
Remove the yoke cover A. Remove the yoke cover A, B, C. Remove the yoke cover C, D.
(Fig.10)
Plunger assembly
Felt (Black) Felt (White) Upper yoke

(Photo.10)
Front view
[D] [D] [101G]
Upper yoke Plunger assembly

Damper stop rail
(Fig.11) (Photo.11)
16
DGC1B
20. Key Sensor Unit

20-2 Remove the action unit. (See procedure 14.)
20-3 Remove the sixteen (16) screws marked [62S]. The
key sensor unit can then be removed. (Fig.12)
When removing the keyboard, take care not to
[62S]x16
damage the key shutter on each key. (Photo.12,
Photo.13)
Key
Key sensor unit
(Photo.12)
[62S]: Bind Head Tapping Screw-1 3.0X10 MFZN2B3 (WF109400)
Sutter assembly (WC368200) (Fig.12)
(Photo.13)
21. KEY SENSOR Circuit Board

21-2 Remove the action unit. (See procedure 14.)
21-3 Remove the key sensor unit. (See procedure 20.)
21-4 Remove the two (2) screws marked [51GB]. The KEY
SENSOR circuit board can then be removed. (Fig.13)
Bottom view
Key sensor unit
[51GB]
KEY SENSOR
[51GB]: Bind Head Tapping Screw-S 3.0X4 MFZN2W3 (WG242400)
(Fig.13)
17
DGC1B
22. Pedal Drive Unit 23. PEDAL DRIVE Circuit Board

22-1 Remove the pedal lyre assembly. (See procedure 15.) 23-1 Remove the pedal lyre assembly. (See procedure 15.)
22-2 Remove the four (4) screws marked [14G]. The pedal 23-2 Remove the pedal main cover. (See procedure 22-2.)
main cover can then be removed. (Fig.14) 23-3 Remove the two (2) screws marked [12GA]. The top
22-3 Remove the four (4) screws marked [16G] and the cover can then be removed. (Fig.15, Photo.14)
two (2) screws marked [41GB]. The pedal drive unit 23-4 Remove the two (2) screws marked [12GB]. The
can then be removed. (Fig.14) bottom cover can then be removed. (Fig.15,
Photo.14)
23-5 Remove the two (2) screws marked [03GA] and the
two (2) screws marked [13GA]. The loud solenoid
assembly can then be removed. (Fig.15, Photo.14)
23-6 Remove the two (2) screws marked [03GB] and the
two (2) screws marked [13GB]. The shift solenoid
assembly can then be removed. (Fig.15, Photo.14)
23-7 Remove the three (3) screws marked [35G] and the
two (2) screws marked [55G]. The PEDAL DRIVE
circuit board can then be removed. (Fig.15, Photo.15)
[41GB]
[16G]
[14G]
Pedal main cover
[14G]
Pedal drive unit
[14G]: Bind Head Screw 4.0X6 MFZN2B3 (WE878400)

[16G]: Truss Head Tapping Screw-1 4.0X20 MFZN2B3 (WE965300)
[41GB]: Truss Head Tapping Screw-1 4.0X12 MFZN2B3 (WE965200)
(Fig.14)
18
DGC1B
[12GA] x 2
Top cover
Shift solenoid
assembly
[35G]
[35G]
Bottom cover
[55G] [12GB] x 2
[03GB]
[55G]
Loud solenoid assembly
[03GA]
[13GA]
[13GB]
PEDAL DRIVE
[03G]: Bind Head Screw 4.0X6 MFZN2W3 (WF105800)

[12G]: Bind Head Screw 4.0X4 MFZN2B3 (WG488000)
[35G]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)
[55G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 IT (WG486700)
(Fig.15)
PEDAL DRIVE [12GA] Top cover [12GA] Pedal drive unit
[35G] [35G]
[03GB]
[03GA] [55G] [55G]
PEDAL DRIVE [35G]
[35G]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)

Shift solenoid [55G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 IT (WG486700)
Loud solenoid [13GA] [13GB]
assembly assembly
[12GB] Bottom cover [12GB] (Photo.15)
[03G]: Bind Head Screw 4.0X6 MFZN2W3 (WF105800)

(Photo.14)
19
DGC1B
24. Circuit Boards and Units

24-1 Remove the individual circuit boards and units.
(Fig.16)
These circuit boards and units are attached to
the bottom of the piano.
Bottom view
Upper box cover
[372G]
[B128S]
[51GB]
Speaker saran
net cover
Amplifier unit
Speaker box
[B121S] assembly (Left)
[30G]
[30G]
Speaker box
assembly (Right)
Speaker saran
net cover
DRIVE C
DRIVE B
Yoke cover D
DRIVE A [331G] x 4 Yoke cover A

PK-CTL Pedal connector
(Higher tones) DRIVE A
Yoke cover C Yoke cover B CTRL G (Lower tones)
[30G]: Bind Head Screw 5.0X14 MFZN2B3 (WG490200) [372G]: Bind Head Screw 4.0X10 MFZN2B3 (WE980400)
[51GC]: Bonding Tapping Screw-C 4.0X8 MFZN2B3 (WG488800) [B121S]: Pan Washer Head Screw 4.0X8 MFZN2B3 (WF107600)
[331G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800) [B128S]: Truss Head Tapping Screw-1 4.0X20 MFZN2B3 (WE965300)
(Fig.16)
Connection key numbers for each drive circuit board.

1. DRIVE C circuit board ............................... 1KEY~12KEY
2. DRIVE A circuit board (lower tones) ........ 13KEY~44KEY
3. DRIVE A circuit board (higher tones) ...... 45KEY~76KEY
4. DRIVE B circuit board ............................... 77KEY~88KEY
20
DGC1B
PK-CTL
A. PK-CTL Circuit Board
A-1 Remove the yoke cover D. (See procedure 18.)
A-2 Remove the three (3) screws marked [221GA]. The
PK-CTL circuit board can then be removed. (Fig.16,
Photo.16)
B. DRIVE A Circuit Board (Higher Tones)

B-1 Remove the pedal lyre assembly. (See procedure 15.)
B-2 Remove the yoke cover C. (See procedure 17.)
B-3 Remove the three (3) screws marked [221GB]. The
DRIVE A circuit board (higher tones) can then be [221GA]
removed. (Fig.16, Photo.17)
[221GA]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)
(Photo.16)
DRIVE A (Higher tones)
[221GB]
[221GB]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)

(Photo.17)
C. DRIVE A Circuit Board (Lower Tones) C-3 Remove the yoke cover B. (See procedure 17.)
(Time required: About 6 minutes) C-4 Remove the three (3) screws marked [221GC]. The
C-1 Remove the pedal lyre assembly. (See procedure 15.) DRIVE A circuit board (lower tones) can then be
C-2 Remove the yoke cover A. (See procedure 16.) removed. (Fig.16, Photo.18)
DRIVE A (Lower tones)
[221GC]
[221GC]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)
(Photo.18)
21
DGC1B
D. DRIVE B Circuit Board E. DRIVE C Circuit Board

D-1 Remove the yoke cover D. (See procedure 18.) E-1 Remove the yoke cover A. (See procedure 16.)
D-2 Remove the two (2) screws marked [221GD]. The E-2 Remove the two (2) screws marked [221GE]. The
DRIVE B circuit board can then be removed. (Fig.16, DRIVE C circuit board can then be removed. (Fig.16,
Photo.19) Photo.20)
DRIVE B DRIVE C
[221GD] [221GE]
[221GD]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200) [221GE]: Bind Head Tapping Screw-S 3.0X5 MFZN2W3 (WE980200)
(Photo.19) (Photo.20)
F. CTRL G Circuit Board

F-1 Remove the yoke cover A. (See procedure 16.)
F-2 Remove the hexagonal nut marked [11G]. The CTRL
G circuit board can then be removed. (Fig.16,
Photo.21, Photo.22)
Bottom view Inside view

CTRL G
Yoke cover A [11G] Yoke cover A
[11G]: Hexagonal Nut M12x14x2 P=1.0 (WF559900)

(Photo.22)
(Photo.21)
22
DGC1B
Pedal connector Yoke cover B

G. Pedal connector
G-1 Remove the pedal lyre assembly. (See procedure 15.)
G-2 Remove the yoke cover B. (See procedure 17.)
G-3 Remove the four (4) screws marked [331G]. The
pedal connector can then be removed. (Fig.16,
Photo.23)
H. Amplifier Unit and Upper Box Cover

H-1 Remove the six (6) screws marked [B121S] and the
screw marked [B128S]. The amplifier unit can then
be removed. (Fig.16)
[331G]
H-2 Remove the five (5) screws marked [51GB] and the
screw marked [372G]. The upper box cover can then [331G]: Bind Head Tapping Screw-S 3.0X6 MFZN2B3 (WE877800)
be removed. (Fig.16) (Photo.23)
I. MN Circuit Board and DB Circuit Board

L. PWB Circuit Board
I-1 Remove the amplifier unit. (See procedure 24-H.)
L-1 Remove the amplifier unit. (See procedure 24-H.)
I-2 Remove the upper box cover. (See procedure 24-H.)
L-2 Remove the upper box cover. (See procedure 24-H.)
I-3 Remove the four (4) screws marked [102G]. The MN
L-3 Remove the MN circuit board. (See procedure 24-I.)
circuit board and the MN shield unit can then be
L-4 Remove the two (2) screws marked [81G] and
removed with the DB circuit board. (Fig.17)
remove either side of the MN bracket. (Fig.17)
I-4 Remove the two (2) screws marked [112G]. The DB
L-5 Remove the six (6) screws marked [161G]. The PWB
circuit board can then be removed from the MN
circuit board can then be removed. (Fig.17)
circuit board. (Fig.17)
J. JACK1 Circuit Board M. NF Circuit Board

M-1 Remove the amplifier unit. (See procedure 24-H.)
J-1 Remove the amplifier unit. (See procedure 24-H.)
M-2 Remove the upper box cover. (See procedure 24-H.)
J-2 Remove the upper box cover. (See procedure 24-H.)
M-3 Remove the JACK1 circuit board. (See procedure 24-J.)
J-3 Remove the four (4) hexagonal nuts marked [121],
N-4 Remove the two (2) screws marked [128G]. The JK
the three (3) knobs marked [127], the three (3)
shield plate can then be removed with the JK shield
hexagonal nuts marked [E] and the two (2) screws
cover. (Fig.17)
marked [123G] fastening the ground wire. The JACK
M-5 Remove the three (3) screws marked [131GA]. The
circuit board can then be removed. (Fig.17)
NF circuit board can then be removed. (Fig.17,
Fig.18)
K. MA120 Assembly and MA120 Circuit Board
K-1 Remove the amplifier unit. (See procedure 24-H.)
N. FU Circuit Board
K-2 Remove the upper box cover. (See procedure 24-H.)
N-1 Remove the amplifier unit. (See procedure 24-H.)
K-3 Remove the MN circuit board. (See procedure 24-I.)
N-2 Remove the upper box cover. (See procedure 24-H.)
K-4 Remove the two (2) screws marked [81G] and
N-3 Remove the JACK1 circuit board. (See procedure 24-J.)
remove either side of the MN bracket. (Fig.17)
N-4 Remove the NF circuit board. (See procedure 24-M.)
K-5 Remove the four (4) screws marked [141G]. The
N-5 Remove the three (3) spacers and the screw marked
MA120 assembly can then be removed. (Fig.17)
[131GB]. The FU circuit board can then be removed.
K-6 Remove the five (5) screws marked [1], the four (4)
(Fig.17, Fig.18)
screws marked [2] and the screw marked [3]. The
MA120 circuit board can then be removed. (Fig.17,
Fig.19)
23
DGC1B
Left side view Top view

[161G] x 6 PWB [81G]
[131GA] x2
MN bracket [141G]
[123G]
[128G] [102G]
JACK1 FU MA120 assembly
[131GB]
[127] [102G]
[E] [112G] x 2
NF
[E] x 3
DB
[131GA]
[121]
[121]
MN
[121] & MN Shield unit
Power transformer
[102G]
[128G] JK shield plate & [102G] MN bracket MA120 [141G]

[123G]
JK shield cover [151GH] x 4 [81G] x 2
[121]: Hexagonal Nut M12X14X2 P=1.0 (WF559900) [128G]: Bind Head Tapping Screw-S 4.0X6 MFZN2B3 (WE974300)
[81G]: Bind Head Tapping Screw-S 3.0X6 MFZN2W3 (WE877900) [131G]: Bind Head Tapping Screw-S 3.0X6 MFZN2W3 (WE877900)
[102G]: Bind Head Tapping Screw-S 3.0X8 MFZN2W3 (WE972100) [141G]: Bind Head Screw 4.0X5 MFZN2B3 (WG488100)
[112G]: Bind Head Tapping Screw-S 3.0X6 MFZN2W3 (WE877900) [151GB]: Bind Head Screw 4.0X5 MFZN2B3 (WG488100)
[123G]: Bind Head Screw 4.0X5 MFZN2B3 (WG488100) [161G]: Bonding Tapping Screw-C 4.0X8 MFZN2B3 (WG488800)
(Fig.17)
FU Spacer
MA120 assembly
Top view
[2] [3] [2] [2] [2]
Spacer
Spacer
NF
[1]
[131GB]
[1] [1] MA120

[131GA] [131GA]
Cord binder Cord binder [131GA] [1]: Bind Head Tapping Screw-B 4.0X8 MFZN2W3 (WE974600)
[2]: Bind Head Tapping Screw-B 3.0X10 MFZN2W3 (WE774200)
[131G]: Bind Head Tapping Screw-S 3.0X6 MFZN2W3 (WE877900) [3]: Bind Head Tapping Screw-B 3.0X16 MFZN2W3 (WE973400)
(Fig.18) (Fig.19)
24
DGC1B
O. Power Transformer
Speaker Box Assembly (Left)
O-1 Remove the amplifier unit. (See procedure 24-H.)
Speaker (Tweeter/2.5cm) [L51G] x 4
O-2 Remove the upper box cover. (See procedure 24-H.)
O-3 Remove the JACK1 circuit board. (See procedure 24-J.)
O-4 Remove the two (2) screws marked [128G]. The JK
shield plate can then be removed with the JK shield
cover. (Fig.17)
NW
O-5 Remove the four (4) screws marked [151GH]. The
power transformer can then be removed. (Fig.17)
[L61] x 4
P. Speaker Box Assembly
(Time required: About 1 minute)
P-1 Remove the three (3) screws marked [30G]. The
speaker box assembly can then be removed. (Fig.16)
The speaker box assemblies on the left and right
sides can be removed in the same manner.
Q. Speaker (Woofer/16.0cm)
Q-1 Remove the speaker box assembly (left or right).
(See procedure 24-P.)
Q-2 Remove the speaker saran net cover. (Fig.16,
Photo.24)
[L42G] x 4 Speaker (Woofer/16.0cm)
Q-3 Remove the four (4) screws marked [L42G]. The
speaker (woofer) can then be removed. (Fig.20)
[L61]: Support, PCB LCBS-04T (CB046030)
[L42G]: Bind Head Tapping Screw-1 4.0X16 MFZN2W3 (WF109500)
R. Speaker (Tweeter/2.5cm) [L51G]: Bind Head Tapping Screw-1 4.0X16 MFZN2W3 (WF109500)
R-1 Remove the speaker box assembly (left or right). (Fig.20)
R-2 Remove the speaker saran net cover. (Fig.16, Speaker saran net cover
Photo.24)
R-3 Remove the four (4) screws marked [L51G]. The
speaker (tweeter) can then be removed. (Fig.20)
S. NW Circuit Board
S-1 Remove the speaker box assembly (left or right).
S-2 Remove the speaker saran net cover. (Fig.16,
Photo.24)
S-3 Remove the speaker (tweeter).
(See procedure 24-R.)
S-4 Remove the NW circuit board from the four (4)
supports marked [L61] by using the pliers. (Fig.20)
(Photo.24)
25
DGC1B
LSI PIN DESCRIPTION
AK4520AVF-E2 (XT802A00) ADC & DAC ...................................................... 29

HD63266FV (XI939A00) FDC (Floppy Disk Controller) ................................... 29
HD6417014F28V (XU147A00) CPU ................................................................ 28
HD64F2128F16 (X2690A00) CPU (FLASH) .................................................... 26
HG73C205AFDV (XU947C00) SWX00B (Tone Generator) ............................ 32
M37732S4BFP-25 (X7527A00) CPU ............................................................... 27
M38881M2-062FP (XS345A00) SCI ................................................................ 34
PCM1702U (XP551A00) DAC (Digital to Analog Converter) ........................... 31
R5F21142SP (X7801A00) CPU ....................................................................... 27
TC203C760HFG-001 (XR738A00) SWP30 (Standard Wave Processor) ........ 33
TC203C760HFG-002 (XS725A00) SWP30B (Standard Wave Processor) ...... 33
TMS320VC5402 (XW685A00) DSP ................................................................. 30
µPD63200GS-E1 (XP867A00) DAC (Digital to Analog Converter) .................. 31
XC9572XL-10VQG64C (XW774E00) PLD ...................................................... 31
YM3421-FZ (XL150A00) PWM GENERATOR ................................................. 34
HD64F2128F16 (X2690A00) CPU (FLASH) KEY SENSOR: CPU1

PIN PIN
NAME I/O FUNCTION NAME I/O FUNCTION
NO. NO.
1 P50/TxD0 I/O Port5 / Transmission data 33 P26/RxD1 I/O Port2 / Reception data
2 P51/RxD0 I/O Port5 / Reception data 34 P25/TxD1 I/O Port2 / Transmission data
3 P52/SCL0 I/O Port5 / Serial clock 35 P24/SCL1 I/O Port2 / Serial clock
4 /RES I Reset 36 P23/SDA1 I/O Port2 / Serial data
5 NMI I Non-maskable interrupt 37 P22 I/O
6 Vcc Power supply +5V 38 P21 I/O Port2
7 /STBY I Stand-by mode signal 39 P20 I/O
8 Vss Ground 40 Vss Ground
9 XTAL I 41 P17 I/O
Crystal oscillator
10 EXTAL I 42 P16 I/O
11 MD1 I 43 P15 I/O
Mode select
12 MD0 I 44 P14 I/O
Port1
13 AVss Analog ground 45 P13 I/O
14 P70/AN0 I 46 P12 I/O
15 P71/AN1 I 47 P11 I/O
16 P72/AN2 I 48 P10 I/O
17 P73/AN3 I 49 P30 I/O
Port7 / Analog input
18 P74/AN4 I 50 P31 I/O
19 P75/AN5 I 51 P32 I/O
20 P76/AN6 I 52 P33 I/O
Port3
21 P77/AN7 I 53 P34 I/O
22 AVcc Analog power supply +5V 54 P35 I/O
23 P60 I/O 55 P36 I/O
24 P61 I/O 56 P37 I/O
25 P62 I/O 57 P40//IRQ2 I/O
26 P63 I/O 58 P41//IRQ1 I/O Port4 / Interrupt request
Port6
27 P64 I/O 59 P42//IRQ0 I/O
28 P65 I/O 60 P43 I/O
29 P66 I/O 61 P44 I/O
Port4
30 P67 I/O 62 P45 I/O
31 Vcc Power supply +5V 63 P46 I/O
32 P27/SCK1 I/O Port2 / Serial clock 64 P47/SDA0 I/O Port4 / Serial data
26
DGC1B
R5F21142SP (X7801A00) CPU CONTROLLER: IC020

PIN PIN
NO. NO.
1 P3_5/SSCK/CMP1_2 I/O Port I/O / Clock I/O / Timer C output 11 P1_6/CLK0 I/O Port I/O / Transfer clock I/O
2 P3_7/CNTR0/SSO I/O Port I/O / Timer X output / Data I/O 12 P1_5/RXD0/CNTR01/INT11 I/O Port I/O / Serial data input / Timer X I/O / Interrupt input
3 RESET I Reset 13 P1_4/TXD0 I/O Port I/O / Serial data output
4 XOUT/P4_7 I/O Main clock output / Port I/O 14 P1_3/KI3/AN11/TZOUT I/O Port I/O / Key input interrupt / A/D converter analog input / Timer output
5 Vss/AVss I Power supply / Analog power supply 15 P1_2/KI2/AN10/CMP0_2 I/O Port I/O / Key input interrupt / A/D converter analog input / Timer C output
6 XIN/P4_6 I Main clock input / Port I/O 16 AVcc/VREF I Analog power supply / Reference voltage input
7 Vcc I Power supply 17 P1_1/KI1/AN9/CMP0_1 I/O Port I/O / Key input interrupt / A/D converter analog input / Timer C output
8 MODE I Mode 18 P1_0/KI0/AN8/CMP0_0 I/O
9 P4_5/INT0 I/O Port I/O / Interrupt input 19 P3_3/TCIN/INT3/SSI/CMP1_0 I/O Port I/O / Timer C input / Interrupt inout / Data I/O / Timer C output
10 P1_7/CNTR00/INT10 I/O Port I/O / Timer X I/O / Interrupt input 20 P3_4/SCS/CMP1_1 I/O Port I/O / Chip select I/O / Timer C output
M37732S4BFP-25 (X7527A00) CPU PK-CTL: IC04

PIN PIN
NO. NO.
1 P70/AD0 I/O CMOS in/out port 7/Analog input 41 P23/A19/D3 I/O
2 P67/TB2IN I/O 42 P22/A18/D2 I/O
CMOS in/out port 2/Address bus/Date bus
3 P66/TB1IN I/O (Timer B0-B2 in) 43 P21/A17/D1 I/O
4 P65/TB0IN I/O 44 P20/A16/D0 I/O
5 P64/INT2 I/O 45 P17/A15/D15 I/O
CMOS in/out port 4
6 P63/INT1 I/O 46 P16/A14/D14 I/O
7 P62/INT0 I/O (Interrupt request in) 47 P15/A13/D13 I/O
8 P61/TA4IN I/O 48 P14/A12/D12 I/O
(Timer A4 in/out) CMOS in/out port 1/Address bus/Date bus
9 P60/TA4OUT I/O 49 P13/A11/D11 I/O
10 P57/TA3IN I/O 50 P12/A10/D10 I/O
11 P56/TA3OUT I/O 51 P11/A9/D9 I/O
12 P55/TA2IN I/O 52 P10/A8/D8 I/O
13 P54/TA2OUT I/O 53 P07/A7 I/O
CMOS in/out port 4/Timer A0-A3 in
14 P53/TA1IN I/O 54 P06/A6 I/O
15 P52/TA1OUT I/O 55 P05/A5 I/O
16 P51/TA0IN I/O 56 P04/A4 I/O
CMOS in/out port 0/Address bus
17 P50/TA0OUT I/O 57 P03/A3 I/O
18 P47 58 P02/A2 I/O
19 P46 59 P01/A1 I/O
20 P45 60 P00/A0 I/O
21 P44 I/O 61 P87/TXD1 I/O (Data transmission)
CMOS in/out port 4
22 P43 I/O 62 P86/RXD1 I/O (Data reception)
23 P42/ I/O ( output) 63 P85/CLK1 I/O (Clock)
24 P41/RDY I/O (Ready) 64 P84/CTS1/RTS1 I/O CMOS in/out port 8/Clear to send/Request to sen
25 P40/HOLD I/O (Hold request) 65 P83/TXD0 I/O (Data transmission)
26 BYTE I 8bit/16bit select 66 P82/RXD0 I/O (Data reception)
27 CNVss I Chip mode select 67 P81/CLK0 I/O (Clock)
28 RESET I Reset 68 P80/CTS0/RTS0 I/O
29 XIN I 69 Vcc Power supply
Internal clock osc. in/out
30 XOUT O 70 AVCC Analog power supply
31 E I Enable 71 VREF I Reference voltage
32 Vss Ground 72 AVSS Analog ground
33 P33/HLDA I/O (Hold acknowledge) 73 Vcc Ground
34 P32/ALE I/O CMOS in/out port 3/(Address latch enable) 74 P77/AN7/ADTRG I/O (A/D trigger)
35 P31/BHE I/O (Byte high enable) 75 P76/AD6 I/O
36 P31/RW I/O (Read/Write) 76 P75/AD5 I/O
37 P27/A23/D7 I/O 77 P74/AD4 I/O CMOS in/out Port 7/Analog input
38 P26/A22/D6 I/O 78 P73/AD3 I/O
CMOS in/out port 2/Address bus/Date bus
39 P25/A21/D5 I/O 79 P72/AD2 I/O
40 P24/A20/D4 I/O 80 P71/AD1 I/O
27
DGC1B
CONTROLLER: IC007
HD6417014F28V (XU147A00) CPU MN: IC002
PIN PIN
NO. NO.
1 TIOC4/DACK0/PE14 I/O MTU I/O / DMA acknowledge / Port E 57 D11 I/O
2 PE15 O Port E 58 D10 I/O
Data bus
3 VSS I Ground 59 D9 I/O
4 A0 O 60 D8 I/O
5 A1 O 61 VSS I Ground
6 A2 O 62 D7 I/O
7 A3 O 63 D6 I/O Data bus
8 A4 O 64 D5 I/O
9 A5 O 65 VCC I Power supply
10 A6 O 66 D4 I/O
11 A7 O 67 D3 I/O
12 A8 O Address bus 68 D2 I/O Data bus
13 A9 O 69 D1 I/O
14 A10 O 70 D0 I/O
15 A11 O 71 VSS I Ground
16 A12 O 72 XTAL I Crystal oscillator
17 A13 O 73 MD3 I Mode control
18 A14 O 74 EXTAL I Crystal oscillator
19 A15 O 75 MD2 I Mode control
20 A16 O 76 NMI I Non-maskable interrupt request
21 VCC I Power supply 77 VCC I Power supply
22 A17 O Address bus 78 MD1 I Mode control
23 VSS I Ground 79 MD0 I Mode control
24 /RAS//IRQ0/PB2 I/O Row address strobe/Interrupt request/Port B 80 PLLVCC I PLL Power supply
25 /CASL//IRQ1/PB3 I/O Column address strobe (low)/Interrupt request/Port B 81 PLLCAP I PLL capacitor
26 /CASH//IRQ2/PB4 I/O Column address strobe (high)/Interrupt request/Port B 82 PLLVSS I PLL Ground
27 VSS I Ground 83 CK / PA15 O Clock / Port A
28 RDWR //IRQ3/PB5 I/O DRAM read/write / Interrupt request/ Port B 84 /RES I Power on reset
29 A18//BACK/PB6 I/O Address bus / Bus acknowledge / Port B 85 DREQ0/PE0 I/O DMA request / Port E
30 A19//BREQ/PB7 I/O Address bus / Bus request / Port B 86 DRAK0/PE1 O DMA acknowledge / Port E
31 A20//IRQ6/PB8 O Address bus / Interrupt request / Port B 87 PE2 O
32 A21//IRQ7/PB9 O 88 PE3 O Port E
33 VSS I Ground 89 PE4 O
34 /RD O Read 90 VSS I Ground
35 /WDTOVF O Watch dog timer overflow 91 AN0 / PF0 I
36 /WRH/PA13 O High write / Port A 92 AN1 / PF1 I
37 VCC I Power supply 93 AN2 / PF2 I Analog input / Port F
38 /WRL O Low write 94 AN3 / PF3 I
39 VSS I Ground 95 AN4 / PF4 I
40 /CS1 O Chip select 96 AN5 / PF5 I
41 /CS0 O Chip select 97 AVSS I Analog ground
42 /IRQ3/TCLKD/PA9 I/O Interrupt request / Timer clock/ Port A 98 AN6 / PF6 I Analog input / Port F
43 TCLKC//IRQ2 /PA8 I/O Timer clock / Interrupt request / Port A 99 AN7 / PF7 I
44 /CS3/TCLKB/PA7 O Chip select / Timer clock / Port A 100 AVCC I Power supply
45 /CS2/TCLKA/PA6 O Chip select / Timer clock / Port A 101 VSS I Ground
46 /IRQ1/SCK1/PA5 I/O Interrupt request / Serial clock / Port A 102 PE5 O Port E
47 TXD1/PA4 O Data transmission / Port A 103 VCC I Power supply
48 RXD/PA3 I Data reception / Port A 104 PE6 I/O
49 /IRQ0/PA2 I/O Interrupt request / Port A 105 PE7 I/O
50 TXD0/PA1 O Data transmission / Port A 106 PE8 I/O Port E
51 RXD0/PA0 I Data reception / Port A 107 PE9 O
52 D15 I/O 108 PE10 O
53 D14 I/O Data bus 109 VSS I Ground
54 D13 I/O 110 PE11 O Port E
55 VSS I Ground 111 PE12 O
56 D12 I/O Data bus 112 /MRES/PE13 I Manual reset / Port E
28
DGC1B
AK4520AVF-E2 (XT802A00) ADC & DAC DSP: IC002

PIN PIN
NO. NO.
1 VREFH I Positive Voltage Reference Input, VA 15 MCLK I Master Clock Input
2 VREFL I Negative Voltage Reference Input, AGND 16 DEM0 I De-emphasis Frequency Select
3 AINR+ I Rch Analog Positive Input 17 DEM1 I De-emphasis Frequency Select
4 AINR- I Rch analog Negative Input 18 TST3 I/O
5 AINL+ I Lch Analog Positive Input 19 TST2 I/O Test Pins (Pull Down Pins)
6 AINL- I Lch analog Negative Input 20 TST1 I
7 VA - Analog Power Supply 21 VD - Digital Power Supply
8 AGND - Analog Ground 22 DGND - Digital Ground
9 DIF0 I Audio Data Interface Format 23 /PWDA I DAC power-Down Mode
10 DIF1 I Audio Data Interface Format 24 /PWAD I ADC power-Down Mode
11 LRCK I Input/Output Channel Clock 25 CMODE I Master Clock Select (“H”:384 fs,“L”:256 fs)
12 SCLK I Audio Serial Data Clock 26 AOUTL O Lch Analog Output
13 SDTI I Audio Serial Data Input 27 AOUTR O Rch Analog Output
14 SDTO O Audio Serial Data Output 28 VCOM O Common Voltage Output, VA/2
HD63266FV (XI939A00) FDC (Floppy Disk Controller) CONTROLLER: IC029

PIN PIN
NO. NO.
1 8"//5" I Data transmission speed 33 /TRKO I Track 00 signal
2 XTALSET I Clock select 34 /INDEX I Index signal
3 /RESET I Rest 35 /RDATA I Read data input from FDD
4 E//RD I Enable/Read 36 XTAL2
Clock
5 RW//WR I Read/write/Write 37 EXTAL2
6 /CS I Chip select 38 NC
7 /DACK I DMA acknowledge 39 XTAL1
Clock
8 RS0 I 40 EXTAL1
Register select
9 RS1 I 41 VSS4
Ground
10 VSS1 42 VSS5
Ground
11 VSS2 43 NC
12 D0 I/O 44 VCC2
13 D1 I/O 45 VCC3 Power supply
14 D2 I/O 46 VCC4
15 D3 I/O 47 /WGATE O Write control
Data bus
16 D4 I/O 48 /WDATA O Writ data to FDD
17 D5 I/O 49 VSS6 Ground
18 D6 I/O 50 /STEP O Step signal to control head of FDD
19 D7 I/O 51 /HDIR O Direction
20 /DREQ O DMA request 52 /HLOAD O Head load
21 /IRQ O Interrupt request 53 /HSEL O Head select
22 /DEND I Data end 54 VSS7 Ground
23 VSS3 Ground 55 /DS0 O
24 1/2 EX1 56 /DS1 O
Drive select
25 VCC1 Power supply 57 /DS2 O
26 NUM1 I 58 /DS3 O
27 NUM3 I 59 VSS8
Ground
28 IFS I Host interface select 60 /MON0 O
29 SFORM I Format data 61 /MON1 O
Motor on
30 /INP I Index pulse 62 /MON2 O
31 /READY I Ready from FDD 63 /MON3 O
32 /WPRT I Write control signal 64 VSS9 Ground
29
DGC1B
TMS320VC5402 (XW685A00) DSP DSP: IC001
PIN NAME I/O FUNCTION PIN NAME I/O FUNCTION

No. No.
1 NC 73 NC
2 NC 74 NC
3 Vss 75 DVDD Power supply 1.8V
4 DVDD Power supply 1.8V 76 Vss Ground
5 A10 O Address bus 77 CLKMD1 I
6 HD7 I/O Parallel bidirectional data bus. 78 CLKMD2 I Clock mode select signals.
7 A11 O 79 CLKMD3 I
8 A12 O 80 NC
9 A13 O Address bus 81 HD2 I/O Parallel bidirectional data bus.
10 A14 O 82 TOUT0 O Timer 0 output.
11 A15 O 83 EMU0 I/O Emulator 0 pin.
12 NC 84 EMU1/OFF I/O Emulator 1 pin/disable outputs.
13 HAS I Address strobe. 85 TDO O Testdata output
14 Vss Ground 86 TDI I Test data input pin with interral pullup device.
15 NC 87 TRST I Test reset.
16 CVDD Power supply 3.3V 88 TCK I Test clock.
17 HCS I Chip Select. 89 TMS I Test mode output
18 HR/W I Read/write. 90 NC
19 READY I Data ready. 91 CVDD Power supply 3.3V
20 PS O 92 HPIENA I HPI module select.
21 DS O Data, program, and I/O space select signals. 93 Vss Ground
22 IS O 94 CLKOUT O Master clock output signal.
23 R/W O Read/write signal. 95 HD3 I/O Parallel bidirectional data bus.
24 MSTRB O Memory strobe signal. 96 X1 O Output pin from the internal oscillator for the crystal.
25 IOSTRB O I/O strobe signal. 97 X2/CLKIN I Oscillator input. This is the input to the on-chip oscillator.
26 MSC O Microstate complete. 98 RS I Reset.
27 XF O External flog output (latched software-programmable signal). 99 D0 I/O (LSB)
28 HOLDA O Hold acknawledge. 100 D1 I/O
29 IAQ O Instraction acquisition signal. 101 D2 I/O
30 HOLD I 102 D3 I/O Data bus
31 BIO I Branch control. 103 D4 I/O
32 MP/MC I Microprocessor/microcomputer mode select. 104 D5 I/O
33 DVDD Power supply 1.8V 105 A16 O Address bus
34 Vss Ground 106 Vss Ground
35 NC 107 A17 O
36 NC 108 A18 O Address bus
37 NC 109 A19 O (MSB)
38 NC 110 NC
39 HCNTL0 I Control. 111 Vss Ground
40 Vss Ground 112 DVDD Power supply 1.8V
41 BCLKR0 I/O Receive clock input. 113 D6 I/O
42 BCLKR1 I/O Receive clock input. 114 D7 I/O
43 BFSR0 I/O Frome synchronization pulse for receive input. 115 D8 I/O
44 BFSR1 I/O Frome synchronization pulse for receive input. 116 D9 I/O
45 BDR0 I Serial deta receive input 117 D10 I/O
46 HCNTL1 I Control. 118 D11 I/O Data bus
47 BDR1 I Serial deta receive input 119 D12 I/O
48 BCLKX0 I/O Transmit clock. 120 HD4 I/O
49 BCLKX1 I/O Transmit clock. 121 D13 I/O
50 Vss Ground 122 D14 I/O
51 HINT/TOUT1 O Host interrupt/Timer 1 output. 123 D15 I/O (MSB)
52 CVDD Power supply 3.3V 124 HD5 I/O Parallel bidirectional data bus.
53 BFSX0 I/O Frome synchronization pulse for transmitinput/output. 125 CVDD Power supply 1.8V
54 BFSX1 I/O Frome synchronization pulse for transmitinput/output. 126 NC
55 HRDY O Ready. 127 HDS1 I Data strobe.
56 DVDD Power supply 1.8V 128 Vss Ground
57 Vss Ground 129 HDS2 I Data strobe.
58 HD0 I/O Parallel bidirectional data bus. 130 DVDD Power supply 3.3V
59 BDX0 O Signal data transmit output. 131 A0 O (LSB)
60 BDX1 O Signal data transmit output. 132 A1 O
61 IACK O Interrupt acknowledge signal. 133 A2 O Address bus
62 HBIL I Byte identification. 134 A3 O
63 NMI I Nonmaskable interrupt. 135 HD6 I/O Parallel bidirectional data bus.
64 INT0 I 136 A4 O
65 INT1 I 137 A5 O
66 INT2 I Interrupt acknowledge signal. 138 A6 O Address bus
67 INT3 I 139 A7 O
68 CVDD Power supply 3.3V 140 A8 O
69 HD1 I/O Parallel bidirectional data bus. 141 A9 O
70 Vss Ground 142 CVDD Power supply 1.8V
71 NC 143 NC
72 NC 144 NC
30
DGC1B
PCM1702U (XP551A00) DAC (Digital to Analog Converter) MN: IC105,106

PIN PIN
NO. NO.
1 DATA I Data input 11 +VCC Power supply (+5 V)
2 CLK I Clock 12 BPO Bipolar de-couple
3 NC 13 NC
4 +VDD Power supply (+5 V) 14 IOUT O Output current
5 D.GND Digital ground 15 A.GND Analog ground
6 -VDD Power supply (-5 V) 16 A.GND Analog ground
7 L.E I Latch enable 17 SERV Servo de-couple
8 NC 18 NC
9 NC 19 REF Reference de-couple
10 NC 20 -VCC Power supply (-5 V)
µ PD63200GS-E1 (XP867A00) DAC (Digital to Analog Converter) DB: IC4

PIN PIN
NO. NO.
1 4/8F I 4/8 Fs selection 9 R. REF Channel R voltage reference
2 D. GND Digital ground 10 L. REF Channel L voltage reference
3 16 BIT I 16 bit/18 bit selection 11 L. OUT O Channel L output
4 D. VDD Digital power supply 12 A. GND Analog ground
5 A. GND Analog ground 13 WDCK I Word clock
6 R. OUT O Channel R output 14 RSI I Channel R series input
7 A. VDD 15 SI/LSI I Series input/Channel L series input
Analog power supply
8 A. VDD 16 CLK I Clock
XC9572XL-10VQG64C (XW774E00) PLD DSP: IC015

No. No.
1 INTTO O Output INTTO MIDI Transmission Interrupt Signal. 33 OEMO O Output OEMO Memory OUTPUT ENABLE Signal.
2 PGND - GND (Programable) 34 CEBO O Output CEBO Buffer Chip Select Signal.
3 VCC Power Supply (3.3V) 35 WEMO O Output WEMO memory WRITE ENABLE Signal.
4 PGND - GND (Programable) 36 ARINI I Input ARINI ATAPI READY Signal.
5 PGND - GND (Programable) 37 VCC Power Supply (3.3V)
6 AT160 O Output AT16O ATAPI 16bit data notice signal 38 AH10 I Output AH1O ATAPI Chip Select Signal.
7 BUSUA7 I/O Input/ Output Data Bus bit 7 for BUSUA7 MIDI 39 PGND - GND (Programable)
8 BUSUA5 I/O Input/ Output Data Bus bit 5 for BUSUA5 MIDI 40 PGND - GND (Programable)
9 BUSUA4 I/O Input/ Output Data Bus bit 4 for BUSUA4 MIDI 41 GND - GND
10 BUSUA3 I/O Input/ Output Data Bus bit 3 for BUSUA3 MIDI 42 AH0O O Output AH0O ATAPI Chip Select Signal.
11 RGI I Input for Generation of RGI Reset Pulse. 43 MOUO O Output MOUD MIDI Signal.
12 PGND - GND (Programable) 44 PGND - GND (Programable)
13 PGND - GND (Programable) 45 RAI I Input for Generation of RAI Reset Pulse.
14 GND - GND 46 PGND - GND (Programable)
15 MCLKIN I Input Master Clock for MCLKIN Synchronous Opedration 47 PGND - GND (Programable)
16 CLKIN I Input Clock for CLKIN MIDI. 48 MINI I Input MINI MIDI Signal.
17 ISBI I Input IOSTRB Signal for ISBI Address Decode. 49 RSTO O Output RSTO Reset Pulse.
18 BUSUA2 I/O Output/ Input Data Bus Bit 2 for BUSUA2 MIDI. 50 RWI I Input ReadWrite Signal for RWI Address Decode.
19 BUSUA1 I/O Output/ Input Data Bus Bit 1 for BUSUA2 MIDI. 51 PGND - GND (Programable)
20 BUSUA0 I/O Output/ Input Data Bus Bit 0 for BUSUA2 MIDI. 52 ATRDYO O Output ATRDYO ATAPI READY Signal.
21 GND - GND 53 PTDO Signal for PTDO Internal Rewirte.
22 AIOR O Output AIOR ATAPI READ Signal (DIOR) 54 GND - GND
23 PGND - GND (Programable) 55 VCCIO Power Supply (3.3V)
24 DSI I Input Data Select Signal for DSI Address Decode. 56 PSI I Input Program Select Signal for PSI Address Decode.
25 ISI I Input IO Select Signal for ISI Address Decode. 57 A16INI I Input A16INI ATAPI 16bit Data Notice Signal.
26 VCCIO Power Supply (3.3V) 58 BUSUA6 O Input/ Output Data Bus for BUSUA6 MIDI.
27 CESO O Output CESO SRAM Chip Select Signal. 59 PGND - GND (Programable)
28 PTDI Signal for PTDI Internal Rewrite Signal 60 A15I I Address Input bit15 for A15I Address Decode.
29 PTMS Signal for PTMS Internal Rewrite Signal 61 A14I I Address Input bit14 for A14I Address Decode.
30 PTCK Signal for PTCK Internal Rewrite Signal 62 INTRO O Output INTRO MIDI Receipt Interrupt Signal.
31 CEF O Output CEF FLASH Chip Select Signal. 63 MSBI I Input MSTRB Signal for MSBI Address Decode.
32 AIWO O Output AIWO ATAPI WRITE Signal (DIOW). 64 PGND - GND (Programable)
31
DGC1B
HG73C205AFDV (XU947C00) SWX00B (Tone Generator) DB: IC5

NO. NO.
1 ICN I Initial clear 85 CMA3 O Program address bus
2 RFCLKI I PLL Clock 86 CMA8 O Program address bus
3 TM2 I PLL Control 87 CMA2 O Program address bus
4 AVDD_PLL Power supply 88 CRD O read signal
5 AVSS_PLL Ground 89 CMA1 O Program address bus
6 MODE0 I SWX dual mode 90 CUB O high byte effective signal
7 VCC7 Power supply 91 VCC91 Power supply
8 GND8 Ground 92 GHND92 Ground
9 XIN I crystal oscillator 93 CS1 O CS signal
10 XOUT O crystal oscillator 94 CMA0 O Program address bus
11 MODE1 I SWX separate mode 95 CLB O low byte effective signal
12 TEST0 I TEST pin 96 CMA12 O Program address bus
13 TESTON I TEST pin 97 CMA11 O Program address bus
14 AN0-P40 I A/D converter 98 CMA10 O Program address bus
15 AN1-P41 I A/D converter 99 CMA9 O Program address bus
16 AN2-P42 I A/D converter 100 GND100 Ground
17 AN3-P43 I A/D converter 101 CWE O write signal
18 AVDD_AN Power supply 102 CMA16 O Program address bus
19 AVSS_AN Ground 103 CMA15 O Program address bus
20 TXD0 O for MIDI or TO-HOST 104 CMA14 O Program address bus
21 TXD1 O for MIDI 105 CMA13 O Program address bus
22 EXCLK I Crystal oscillator 106 CMD8 I/O Program memory Data bus
23 SMD11 I/O Wave memory data bus 107 CMD7 I/O Program memory Data bus
36 GND36 Ground 120 GND115 Ground
40 SMD15 I/O Wave memory data bus 124 CMA21 O Program address bus
41 SOE O read signal 125 PDT15 I/O SWX access data bus
42 SWE O write signal 126 PDT14 I/O SWX access data bus
43 SRAS O RAS signal 127 PDT13 I/O SWX access data bus
44 SCAS O CAS signal 128 PDT12 I/O SWX access data bus
45 REFRESH O REFRESH signal 129 PDT11 I/O SWX access data bus
46 CS0 O CS signal 130 PDT10 I/O SWX access data bus
47 SMA0 O Memory address bus 131 PDT9 I/O SWX access data bus
59 SMA5 O Memory address bus 143 VCA143 Power supply
61 VCC61 Power supply 145 PAD2 I SWX access address bus
62 SMA11 O Memory address bus 146 PAD1 I SWX access address bus
63 SMA6 O Memory address bus 147 PAD0 I SWX access address bus
64 SMA10 O Memory address bus 148 VCC148 Power supply
65 SMA7 O Memory address bus 149 GND149 Ground
66 SMA9 O Memory address bus 150 PCS I Chip select
67 SMA17 O Memory address bus 151 PWR I write enable
68 SMA8 O Memory address bus 152 PRD I read enable
69 SMA18 O Memory address bus 153 RXD0 I for Midi or TO-HOST
70 SMA19 O Memory address bus 154 RXD1 I for Midi or Key scan
71 SMA20 O Memory address bus 155 SCLKI I EXT Clock
72 SMA21 O Memory address bus 156 ADIN I A/D converter
73 SMA22 O Memory address bus 157 ADLR O A/D converter LR clock
74 SMA23 O Memory address bus 158 DO0 O DAC
75 CMA20 O Program address bus 159 DO1 O DAC
76 CMA19 O Program address bus 160 SYSCLK O 1/2 clock
78 GND78 O Ground 162 GND162 Ground
79 CMA18 O Program address bus 163 WCLK O for DAC LR clock
80 CMA17 O Program address bus 164 QCLK O 1/12 clock
81 CMA5 O Program address bus 165 BCLK O IIS-DAC clock
82 CMA6 O Program address bus 166 SYI I Synch signal
83 CMA4 O Program address bus 167 IRQ0 I Interrupt request
84 CMA7 O Program address bus 168 NMI I Interrupt request
32
DGC1B
TC203C760HFG-001 (XR738A00) SWP30

TC203C760HFG-002 (XS725A00) SWP30B
(AWM Tone Generator coped with MEG) Standard Wave Processor MN: IC007
PIN PIN
NO. NAME I/O FUNCTION NO. NAME I/O FUNCTION
1 Vss (Ground) 121 VSS (Ground)
2 CA0 I 122 HMD0 I/O
Address bus internal register
Wave memory data bus (Upper data memory)
10 CA8 I 130 HMD8 I/O
11 CA9 I 131 HMD9 I/O
12 CA10 I 132 HMD10 I/O
13 CA11 I 133 HMD11 I/O
14 VSS (Ground) 134 HMD12 I/O
15 CD0 I/O 135 HMD13 I/O
16 CD1 I/O 136 HMD14 I/O
17 CD2 I/O 137 HMD15 I/O
18 CD3 I/O 138 VSS (Ground)
19 CD4 I/O 139 HMA0 O
20 CD5 I/O 140 HMA1 O
21 CD6 I/O 141 HMA2 O
22 CD7 I/O Data bus of internal register 142 HMA3 O
23 CD8 I/O 143 HMA4 O
24 CD9 I/O 144 HMA5 O
25 CD10 I/O 145 HMA6 O
26 CD11 I/O 146 HMA7 O
27 CD12 I/O 147 HMA8 O
28 CD13 I/O 148 HMA9 O
29 CD14 I/O 149 HMA10 O
30 VDD (Power supply) 150 VSS (Ground)
31 VSS (Ground) 151 VDD (Power supply)
32 CD15 I/O 152 HMA11 O Wave memory address bus (Upper 16 bits)
33 /CS I Chip select 153 HMA12 O
34 /WR I Write strobe 154 HMA13 O
35 /RD I Read strobe 155 HMA14 O
36 VDDS (Power supply) 156 HMA15 O
37 SYSH0 O 157 HMA16 O
NSYS/LNSYS upper 16 bits
45 KONO0 O 165 HMA24 O
46 KONO1 O 166 VSS (Ground)
Key on data
47 KONO2 O 167 /MRAS O RAS when DRAM(s) is connected to wave memory
48 KONO3 O 168 /MCAS O CAS when DRAM(s) is connected to wave memory
49 VSS (Ground) 169 /MOE O Wave memory output enable
50 SYSL0 I/O 170 /MWE O Wave memory write enable
51 SYSL1 I/O 171 VSS (Ground)
52 SYSL2 I/O 172 LMD0 I/O
NSYS input/LNSYS output lower 8 bits
58 KONI0 I 178 LMD6 I/O
60 VDDS I 180 VDDS
Key on data (Power supply) Wave memory data bus (Lower data memory)
61 VSS 181 VSS
(Ground) (Power supply)
(Ground)
64 DAC0 O 184 LMD10 I/O
DAC output
65 DAC1 O 185 LMD11 I/O
66 WCLK O DAC0/DAC1 word clock 186 LMD12 I/O
67 MELO0 O 187 LMD13 I/O
70 MELO3 O MEL wave data output 190 VSS (Ground)
71 MELO4 O 191 LMA0 O
75 VDDS (Power supply) 195 LMA4 O
76 ADLR O ADC word clock 196 LMA5 O
77 MELI0 I 197 LMA6 O
MEL wave data input
83 MELI6 I 203 VSS (Ground)
Wave memory address bus (Lower data memory)
85 VSS (Ground) 205 LMA13 O
86 /RCAS O DRAM column address strobe 206 LMA14 O
87 RA8 O 207 LMA15 O
88 RA7 O 208 LMA16 O
89 RA6 O 209 LMA17 O
90 VDD (Power supply) 210 VDD (Power supply)
91 VSS (Ground) 211 VSS (Ground)
92 RA5 O DRAM address bus 212 LMA18 O
93 RA4 O 213 LMA19 O
94 RA3 O 214 LMA20 O
95 RA2 O 215 LMA21 O
96 RA1 O 216 LMA22 O
97 RA0 O 217 LMA23 O
98 /RRAS O DRAM row address strobe 218 LMA24 O
99 /RWE O DARM write enable 219 VSS (Ground)
100 VSS (Ground) 220 SYO O Sync. signal for master clock
101 RD7 I/O 221 SYOD O Sync. signal for HCLK/QCLK
102 RD6 I/O 222 QCLK O 1/12 master clock (64 Fs)
103 RD5 I/O 223 HCLK O 1/6 master clock (128 Fs)
104 RD4 I/O 224 CK256 O 1/3 master clock (256 Fs)
105 RD3 I/O 225 SYSCLK O 1/2 master clock (384 Fs)
106 RD2 I/O 226 VDDS (Power supply)
107 RD1 I/O 227 SYI I Sync. clock
108 RD0 I/O 228 MCLKI I Master clock input
109 VSS (Ground) 229 MCLKO O Master clock output
110 RD17 I/O DRAM data bus 230 VDD (Power supply)
111 RD16 I/O 231 XIN I Crystal osc. input
112 RD15 I/O 232 XOUT O Crystal osc. output
113 RD14 I/O 233 VSS (Ground)
114 RD13 I/O 234 /IC I Initial clear
115 RD12 I/O 235 CHIP2 I 2 chips mode enable
116 RD11 I/O 236 SLAVE I Master/Slave select when 2 chips mode
117 RD10 I/O 237 /TESTO I
118 RD9 I/O 238 /ACI I Test pin
119 RD8 I/O 239 DCTEST I
120 VDDS (Power supply) 240 VDDS (Power supply)
33
DGC1B
DRIVE A: IC1
YM3421-FZ (XL150A00) PWM GENERATOR DRIVE B: IC101
NO. NO.
1 D6 I 33 C2# O
2 D5 I 34 C1 O
3 D4 I 35 B1 O
4 D3 I Data bus 36 A1# O
5 D2 I 37 A1 O
6 D1 I 38 G1# O
7 D0 I 39 G1 O
8 C3 O 40 F1# O
9 B3 O Key drive pulse 41 F1 O
10 A3# O 42 E1 O
11 VSS Ground 43 D1# O
12 A3 O 44 D1 O
13 G3# O 45 C1# O Key drive pulse
14 G3 O 46 C0 O
15 F3# O 47 B0 O
16 F3 O 48 A0# O
17 E3 O 49 A0 O
18 D3# O 50 G0# O
19 D3 O Key drive pulse 51 G0 O
20 C3# O 52 F0# O
21 C3 O 53 F0 O
22 B2 O 54 E0 O
23 A2# O 55 D0# O
24 A2 O 56 D0 O
25 G2# O 57 C0# O
26 VSS Ground 58 VDD I Power supply
27 G2 O 59 ø/M I Clock
28 F2# O 60 /IC I Initial clear
29 F2 O 61 /CS I Chip select
30 E2 O Key drive pulse 62 /AE I Address enable
31 D2# O 63 /DE I Touch data enable
32 D2 O 64 D7 I Data bus
M38881M2-062FP (XS345A00) SCI CONTROLLER: IC026

No. No.
1 D0 I/O Data 0 33 PB7 O NC
2 /WR O /WR 34 PB6 O NC
3 /RD O /RD 35 PB5 O Panel matrix sink 5
4 /S I Chip Enable 36 PB4 O Panel matrix sink 4
5 BM I Fixed to Low 37 PB3 O Panel matrix sink 3
6 INTR O IRQ Request 38 PB2 O Panel matrix sink 2
7 RxD3 I Receive data CH3 39 PB1 O Panel matrix sink 1
8 TxD3 O Transmit data CH3 40 PB0 O Panel matrix sink 0
9 RxD2 I Receive data CH2 41 PA7 O Panel matrix source 7
10 TxD2 O Transmit data CH2 42 PA6 O Panel matrix source 6
11 RxD1 I Receive data CH1 43 PA5 O Panel matrix source 5
12 TxD1 O Transmit data CH1 44 PA4 O Panel matrix source 4
13 P16 I Remote control data6 45 PA3 O Panel matrix source 3
17 P12 I Remote control data2 49 A7 I Address 7
18 CNVss - GND 50 A6 I Address 6
19 /RES I Reset 51 A5 I Address 5
20 INT I Not used 52 A4 I Address 4
21 P10 I Remote control data1 53 A3 I Address 3
22 XIN I 8MHz 54 A2 I Address 2
23 XOUT O NC 55 A1 I Address 1
24 Vss - GND 56 A0 I Address 0
25 PO7 I Panel switch read 7 57 Vcc - +5
26 PO6 I Panel switch read 6 58 D7 I/O Data 7
34
DGC1B
IC BLOCK DIAGRAM
HD74LVC04FP (XW905A00) MM74HC08SJX (X3073A00) HD74LVC14FP (XY751A00)

Hex Inverter Quad 2 Input AND MM74HC14SJX_NL (XW104A00)
DSP: IC023 PK-CTL: IC10,14 TC74AC14F (XS343A00)
Hex Inverter
DSP: IC024 KEY SENSOR: IC006
1A 1 14 VDD PK-CTL: IC07 CONTROLLER: IC001,012
1A 1 14 VDD
1B 2 13 4B
1Y 2 13 6A 1A 1 14 VDD
1Y 3 12 4A
2A 3 12 2
6Y 1Y 13 6A
2A 4 11 4Y
2Y 4 11 5A 3 12
2A 6Y
5
2B 5 10 3B
3A 10 5Y 4 11
2Y 5A
6 9 2Y 6 9 3A
3Y 4A 3A 5 10 5Y
7 8 VSS 7 8 3Y
Vss 4Y 3Y 6 9
4A
GND 7 8 4Y
MM74HC32SJX_NL (XW106A00) M74HC74AMTCX (X3075A00) HD74HC123AFP (XL106A00)

TC74AC32F(EL,F) (XR771A00) Dual D-Type Flip-Flop Dual Retriggerable Single Shot
Quad 2 Input OR PK-CTL: IC18 CONTROLLER: IC009
PK-CTL: IC09 PK-CTL: IC08
CONTROLLER: IC017,025 1CLR 1 14 VCC
CLR
1D 2 D 13 1A 1 16 Vcc
2CLR
1A 1 14 Vcc
CLR
3 D 12 1B 2 15 1 Rext / Cext
1CK CK 2D
1B 2 13 4B
1PR 4 PR CK 11 2CK 1 3 CLR 14 Cext
1Y 3 12 4A
1Q 5 Q 10
PR 2PR 1Q 4 Q Q 13 1Q
2A 4 11 4Y
6 Q 9
1Q Q 2Q 2Q 5
Q Q 12 2Q
2B 5 10 3B
GND 7 Q 8 2Q CLR
2 Cext 6 11 CLR
2Y 6 9 3A
2 Rext / Cext 7 10 2B
GND 7 8 3Y
INPUTS OUTPUTS GND 8 9 2A
PR CLR CLK D Q Q
L H X X H L
H L X X L H
L L X X H H
H H f H H L
H H f L L H
H H L X QO QO
SN74HC132NSR (XW792A00) HD74AC138FPEL-E (XP446A00) TC74ACT139F(EL,F) (XZ519A00)

Quad 2 Input NAND 3 to 8 Demultiplexer Dual 2 to 4 Demultiplexer
MN: IC008 CONTROLLER: IC011 MN: IC011
1A 1 14 VDD A 1 16 Vcc 1
1G 16 Vcc
A
1B 2 13 4B Select 2 B Y0 15 2
G
G
B YO 1A A 15 2G
1Y 3 12 4A 3 C Y1 14 3 A
C Y1 1B B 14 2A
2Y 4 11 4Y G2A 4 G2A Y2 13 Y2 1Y0 4 Y0 B 13 2B

Output
2A 5 10 3Y Enable 5 G2B Y3 12 5 Y0
G2B Y3 1Y1 Y1 12 2Y0
2B 6 9 3B 6 G1 Y4 11 6 Y1 11
G1 Y4 1Y2 Y2 2Y1
GND 7 8 3A Output Y7 7 Y7 Y5 10 Y5 1Y3 7 Y3 Y2 10 2Y2

Y6 Y3
GND 8 9 Y6 GND 8 9 2Y3
35
DGC1B
HD74LVC245A (XW148A00) HD74LV541AFPEL-E (IS054100) MM74HC573SJX (X3074A00)

Octal 3-State Bus Transceiver TC74AC541F (XS344A00) Octal 3-State D-Latches
DSP: IC017,018 Octal 3-State Buffer PK-CTL: IC16
CONTROLLER: IC032,036,039
1 Output
D1R 20 Vcc G1 1 20 Vcc 1 20 Vcc
Control
2 19
A1 G A1 2 19 G2 D1 2 D Q 19 Q1
C OE
18
A2 3 B1 A2 3 18 Y1 D2 3 D Q 18 Q2
C OE
4 17
A3 B2 A3 4 17 Y2 D3 4 D Q 17 Q3
C OE
5 16
A4 B3 A4 5 16 Y3 D4 5 D Q 16 Q4
C OE
6 15
A5 B4 A5 6 15 Y4 D5 6 D Q 15 Q5
C OE
A6 7 14 A6
B5 7 14 Y5 D6 7 D Q 14 Q6
C OE
A7 8 13 A7
B6 8 13 Y6 D7 8 D Q 13 Q7
C OE
A8 9 12 B7 A8 9 12 Y7 D Q
D8 9 12 Q8
C OE
GND 10 11 B8 GND 10 11 Y8 10 11 Clock
GND
SN74LV574ANSR (IS057410) SN75C1168NSR (XU073A00) MM74HC4040SJX (XY348A00)

TC74AC574F(EL) (X6327A00) Line Driver / Receiver 12-Stage Binary Ripple Counter
Octal D-Type Flip-Flop CONTROLLER: IC013 CONTROLLER: IC021
CONTROLLER: IC016,031,037 DSP: IC025
MN: IC026
Output
1 20 Vcc 1B 1 16 Vcc Q12 1 Q12 16 VDD
Control
D0 2 D Q 19 Q0 1A 2 15 1D Q6 2 Q6 Q11 15 Q11
CK OE
D1 3 D Q 18 Q1 1R 3 14 1Y 3 14
Q5 Q5 Q10 Q10
CK OE
D2 4 D Q 17 Q2 1DE 4 13 1Z Q7 4 Q7 Q8 13 Q8
CK OE
D3 5 D Q 16 Q3 2R 5 12 2DE Q4 5 Q4 Q9 12 Q9
CK OE
D4 6 D Q 15 Q4 6 11 6 11
2A 2Z Q3 Q3 CL CLR
CK OE
D5 7 D Q 14 Q5 2B 7 10 2Y Q2 7 Q2 CK 10 Input Pulses ( )
CK OE
D6 8 D Q 13 Q6 GND 8 9 2D Vss 8 Q1 9 Q1
CK OE
D7 9 D Q 12 Q7
CK OE
GND 10 11 Clock
TC74HC4052AF(EL,F) (XS790A00) TC7SU04F (XY447A00) NJM2115M-T1 (XS511A00)

Differential 4-Channel Inverter Gate NJM2115M-TE1 (X3852A00)
Multiplexer/Demultiplexer CONTROLLER: IC008 PC4570C-A (XC520A00)
DSP: IC003 PC4570G2-E1-A (X7351A00)
Dual Operational Amplifier
0Y 1 16 VDD NC 1 5 Vcc DB: IC7
JACK1: IC03-06
0Y
2Y 2 2Y 2X 15 2X IN A 2
MN: IC107,108,114
Y-COM 3 Y-COM 1X 14 1X GND 3 4 OUT Y
3Y 4 3Y X-COM 13 X-COM +DC Voltage

Output A 1 +V 8
Supply
1Y 5 1Y 0X 12 0X Inverting
2 7 Output B
Input A - +
INH 6 INH 3X 11 3X Non-Inverting Inverting
3 6
Input A + - Input B
VEE 7 A 10 A Non-Inverting
-DC Voltage Supply 4 -V 5
B
Input B
VSS 8 9 B
36
DGC1B
NJM2403D (XG061A00) PC4570HA-A (XB247A00) HA1630Q04T (X2869A00)

NJM2903M(TE1) (X5814A00) Dual Operational Amplifier NJM2112V (TE2) (XT617A00)
Dual Operational Amplifier JACK1: IC01,02 Quad Operational Amplifier
PEDAL DRIVE: IC1 KEY SENSOR: OP001,002
PK-CTL: IC15 DSP: IC021,022
+
A B OUT A 1 14 OUT D
- -
-IN A 2 - + 13 -IN D
+ -
1 2 3 4 5 6 7 8 9
+IN A 3 12 +IN D
Output A 1 +V 8
+DC Voltage +V -IN -V -IN +V
Supply OUT +IN +IN OUT
Inverting +VDD 4 +V -V 11 -VSS
2 7 Output B A A A B B B
Input A - +
Inverting +IN B 5 10 +IN C
Non-Inverting 3 6
Input A + - Input B
- +
6 + -
Non-Inverting -IN B 9 -IN C
Ground 4 5
Input B
OUT B 7 8 OUT C
M62320FP (X2896A00)
I/O Expander
CONTROLLER: IC023
CS0 CS1 CS2 PIN NO. NAME I/O FUNCTION

16 15 14 1 SO O Serial data output
SO 1 16 CS0 2 SCL I Serial clock input
SCL 2
I2C BUS Interface 2 15
3 SDA I/O Serial data input/output
SCL CS1
SDA 3 Shift Resistor 1 SO 4 D0 I/O
Output Data Input/Output SDA 3 14 CS2 5 D1 I/O
8 8 8
Parallel data input/output
4 13
6 D2 I/O
D0 VDD
Output Data Direction Input Data 7 D3 I/O
Latch Resistor Latch D1 5 12 D7 8 GND Ground
Reset 6 11
9 D4 I/O
8 8 D2 D6
VDD 13 8 Input Data 10 D5 I/O
Power On Parallel data input/output
Reset
D3 7 10 D5 11 D6 I/O
GND 8 I/O Port
8 9
12 D7 I/O
GND D4
13 VDD Power supply +5V
14 CS2 I
12 11 10 9 7 6 5 4 15 CS1 I Chip select
D7 D6 D5 D4 D3 D2 D1 D0 16 CS0 I
YH-S1 (XK413A00)
Regulator (Half Bridge)
PWB(HIC unit): 3
9 8
10 13
Starting Power
Driver1
11 Circuit1 SW.TR1 14
16
17
1 21
4 19
Starting Power
Driver2
5 Circuit2 SW.TR2 20
SUB 21 NC
3 2 1
NC Empty Pin: 6 7 12 15 18
, , , ,
37
DGC1B
LA6517-E (XM804A00) RS5C372A-E2 (XU401A00)

Dual Low Voltage Power Amplifier Real Time Clock
JACK1: IC07 CONTROLLER: IC024
INTRB 1 8 VDD
SCL 2 7 OSCIN
Output A 1 8
Inverting
Input A
- +
SDA 3 6 OSCOUT
VDD 2 7
Non-Inverting
Input A
Vss 4 5 INTRA
Inverting
Output B 3 6
Input B
- +
Vss 4 5 Non-Inverting
Input B
CIRCUIT BOARDS
ATAPI (DA) Circuit Board (XY021A0) ........................................................................ 43
CD PANEL Circuit Board (XY109C0) ........................................................................ 42
CONTROLLER (CTRL) Circuit Board (X7372A0) ................................................ 42/43
CTRL G Circuit Board (XR147A0) ............................................................................. 50
DB Circuit Board (XV176C0) ..................................................................................... 49
DRIVE A Circuit Board (XL114D0) ....................................................................... 46/47
DRIVE B Circuit Board (XL114D0) ....................................................................... 46/47
DRIVE C Circuit Board (XL114D0) ....................................................................... 46/47
DSP Circuit Board (XW912A0) .................................................................................. 44
FU Circuit Board (XY228B0) ...................................................................................... 50
JACK1 Circuit Board (X7379A0) ............................................................................... 39
KEY SENSOR Circuit Board (X2329B0) ................................................................... 52
MA120 Circuit Board (XQ393H0) .............................................................................. 48
MN Circuit Board (XY932A0) ................................................................................ 40/41
NF Circuit Board (X6968A0) ...................................................................................... 52
NW Circuit Board (XU777A0) .................................................................................... 50
PASW Circuit Board (XV883A0) ................................................................................ 49
PEDAL DRIVE Circuit Board (XL479E0) ................................................................... 51
PK-CTL Circuit Board (XY168C0) ............................................................................. 51
PWB Circuit Board (XL056D0) .................................................................................. 45
Note: See parts list for details of circuit board component parts.
38
DGC1B
JACK1 Circuit Board

N.C.
L/L+R
AUX OUT
L/L+R
AUX IN
N.C.
R
to MN-CN102
to MN-CN104 VOLUME
to MA120-CN6
BASS
not installed
TREBLE
to MA120-CN5
to NW-CN1
Component side
WG54610
39
DGC1B
MN Circuit Board
to JACK1-CN2
not installed
to DSP-CNSWP
not installed
to DB-CN1
to CONTROLLER
-CN001
not installed
DIP SWITCH
not installed to MA120-CN4
not installed
not installed
to PK-CTL-CN02
to KEY SENSOR
-CN1
N.C. N.C. not installed N.C. to JACK1-CN2
Component side
V590890 1
40
DGC1B
MN Circuit Board
Pattern side
V590890
41
DGC1B
to PK-CTL-CN01
CONTROLLER (CTRL) Circuit Board to MN-CN7
to FU-CN5
TO CONTROL CABLE
IN MIDI OUT FOR PIANO HOST SELECT TO HOST
POWER
to FDD
to DSP-CN1
to FDD
to Speaker
not installed
LCD DRIVE
to LCD to PASW-CN1 N.C.
Component side
CD PANEL Circuit Board

DRIVE SELECT
Component side
Pattern side
CONTROLLER (CTRL): WJ08980
CD PANEL: WG91780
42
DGC1B
CONTROLLER (CTRL) Circuit Board
Pattern side
ATAPI (DA) Circuit Board
Component side
to DSP-CNA1 to DSP-CNA2
CD-ROM drive
Pattern side
CONTROLLER (CTRL): WJ08980
ATAPI (DA): V525550
43
DGC1B
DSP Circuit Board

to ATAPI-CN3
to ATAPI-CN2 to CONTROLLER-CN002
CD CONTROL
to MN-CN12
AUDIO/ANALOG MIDI IN
L
not installedR
RESET
Component side
Pattern side
V525430
44
DGC1B
PWB Circuit Board

to NF-CN2
to DRIVE A-CN34 to PK-CTL-CN03

VN54330 to FU-CN4
Component side
45
DGC1B
DRIVE A Circuit Board A
A A'
A' Component side

CN2: to KEY 13, 45 CN10: to KEY 21, 53 CN18: to KEY 29, 61 CN26: to KEY 37, 69 CN34: to PWB-CB5
CN3: to KEY 14, 46 CN11: to KEY 22, 54 CN19: to KEY 30, 62 CN27: to KEY 38, 70 to DRIVE B-CN114
CN4: to KEY 15, 47 CN12: to KEY 23, 55 CN20: to KEY 31, 63 CN28: to KEY 39, 71 CN35: to PK-CTL-CN04
CN6: to KEY 17, 49 CN14: to KEY 25, 57 CN22: to KEY 33, 65 CN30: to KEY 41, 73 CN36: to PEDAL DRIVE-CN3
CN7: to KEY 18, 50 CN15: to KEY 26, 58 CN23: to KEY 34, 66 CN31: to KEY 42, 74 to DRIVE C-CN215
CN8: to KEY 19, 51 CN16: to KEY 27, 59 CN24: to KEY 35, 67 CN32: to KEY 43, 75 CN37: to PK-CTL-CN06
CN38: to THERMOSTAT
DRIVE B Circuit Board
CN101: to PK-CTL-CN06 CN106: to KEY 81 CN112: to KEY 87 Component side

to DRIVE A-CN37 CN107: to KEY 82 CN113: to KEY 88
CN102: to KEY 77 CN108: to KEY 83 CN114: to DRIVE A-CN34
CN103: to KEY 78 CN109: to KEY 84 CN115: to DRIVE C-CN201
CN104: to KEY 79 CN110: to KEY 85 CN116: to PEDAL DRIVE-CN4
CN105: to KEY 80 CN111: to KEY 86 CN117: to PK-CTL-CN04
to DRIVE A-CN35 CN201: to DRIVE B-CN115
CN202: to KEY 1
DRIVE C Circuit Board CN203: to KEY 2
CN204: to KEY 3
CN205: to KEY 4
CN206: to KEY 5
CN207: to KEY 6
CN208: to KEY 7
CN209: to KEY 8
CN210: to KEY 9
CN211: to KEY 10
CN212: to KEY 11
CN213: to KEY 12
CN214: N.C
CN215: to DRIVE A-CN36
DRIVE A: VN94030 4
DRIVE B: VN94030 4
Component side
DRIVE C: VN94030 4
46
DGC1B
DRIVE A Circuit Board B
B B'
B'
Pattern side
DRIVE B Circuit Board
Pattern side
DRIVE C Circuit Board
Pattern side
DRIVE A: VN94030 3
DRIVE B: VN94030 3
DRIVE C: VN94030 3
47
48
DGC1B
to JACK1-CN5
(Secondary)
to Power Transformer
MA120 Circuit Board
to JACK1-CN7
N.C.
Component side
CAUTION: REPLACE WITH
to MN-CN103 not installed
SAME TYPE 5A 125V FUSE.
ATTENTION: UTILISER UN
FUSIBLE DE RECHANGE DE
MÉME TYPE DE 5A 125V.
NOTE : The symbol ( ) shows Slow operating fuse.
Pattern side
VT14320
N.C.
DB:
PASW: V378990
2NA-V306900
DB Circuit Board
to MN-CN107
Pattern side
Component side
SONG SELECT
REV FWD ENTER
DRIVE VOLUME -10 -8 -6 -4 -2 0

TEMPO
PLAY/PAUSE L-L TRANSPOSE
VOICE
L-R R-L FUNC. METRONOME BALANCE
R-R
STANDBY/ON
Component side
PLAY/PAUSE STOP REC L R VOICE FUNC. METRONOME Selector +/YES -/NO
PART
PASW Circuit Board
Pattern side
to CONTROLLER-CN007
DGC1B
49
DGC1B
FU Circuit Board
to Power Transformer (Primary) to MAINS Power Switch
not installed
to PWB -CB6
to CONTROLLER-CN001
Component side
NW Circuit Board CTRL G Circuit Board
FOOT
CONTROLLER
to Speakers
to PK-CTL-CN08
to JACK1-CN8 Component side
Component side
FU: V525850
NW: V525130
CTRL G: VT83570
50
DGC1B
PK-CTL Circuit Board to DRIVE A-CN35

to DRIVE B-CN117
to MN-CN2
N.C. to KEY SENSOR-CN1
to PWB-CB6
to DRIVE A-CN37 to CTRL G to CONTROLLER-CN001
to DRIVE B-CN101
Component side
Pattern side
PEDAL DRIVE Circuit Board

to LOUD Solenoid Assembly SHIFT Adjustment to SHIFT Solenoid Assembly
to DRIVE B-CN116
LOUD Adjustment to DRIVE A -CN36

to LOUD Solenoid Assembly
Component side
to SHIFT Solenoid Assembly
PK-CTL: V520220
PEDAL DRIVE: VP18870
51
DGC1B
KEY SENSOR Circuit Board

not installed N.C.
WRITE MODE
to PK-CTL-CN02
to MN-CN2
not installed
Component side
Pattern side
NF Circuit Board
to MAINS to PWB-CB1
power switch
Component side
KEY SENSOR: WJ03100
NF: WG00060
52
DGC1B
TEST MODE
+/YES
L R + Power +/YES +/YES +/YES
← →
–/NO –/NO –/NO –/NO
V5.00 Aur 25 2006

V 01. 24 021126 60 REC GP V 1 . 04 06. 07. 14
Factory use only
Test
Select button X4
L: COS. R: SIN 440 Hz → →
53
DGC1B
PLAY PLAY
SNSR PROGRAM MN ROM V 1. 00 MESSAGE

Ver 1. 00 00. 04. 01
PLAY PLAY
KEY SENSOR
DEPTH TEST
SOSTENUTO
PEDAL TEST (GP)
NO RST 255 K1 K2 K3 K4
01 150 149 119 93 67 45
AD 255 test OK
NO RST 255 K1 K2 K3 K4
01 150 149 119 93 67 45
Please perform this measurement when you

AD 255 test OK
replace the key sensor or sensor board.
AD 87 test OK
AD_RATE
SENSOR MEASURE SENSOR ALL KEY MEASURE SENSOR ONE KEY MEASURE SENSOR MANUAL ADJ
( )
VELOCITY CHECK SENSOR ALL KEY MEASURE SENSOR ONE KEY MEASURE SENSOR MANUAL ADJ
WAIT A MOMENT SELECT KEY SELECT KEY
PLAY Press the key that you wish to measure. Press a KEY(ex. 41C#)
SENSOR ALL KEY MEASURE SENSOR ONE KEY = XX SENSOR ONE ADJ : K=41C#
READING REST READING REST +00 VEL=102
REST (soft) (load)
READING END READING END +03 VEL=102
END
NOW WRITING TO FLASH NOW WRITING TO FLASH NOW WRITING TO FLASH
SENSOR ALL KEY MEASURE SENSOR ONE KEY = XX

COMPLETED OK COMPLETED OK SENSOR ONE ADJ : K=41C#
OFF COMPLETED OK A
(another KEY) OFF
READING
Rest: Put the 88 keys in the rest position.
End: Play each of the 88 keys once, lowering them (not too strongly, not too softly) to the end of the stroke.
(A chromatic scale is sufficient.)
54
DGC1B
DSP SHEET TEST
• DSP sheet program and test program version No. display

V 01.21 020405 TEST : V 01.30 010601
• DSP sheet RAM test (There is no memory to clear.)

OK !
• DSP sheet Flash Memory Write/Read test (There is no memory to clear.)

OK !
• DSP sheet Flash Memory Read test

OK ! 9DF947D5 891AC0B8
• DSP sheet A/D, D/A converter, operational amplifier IC test

OK !
• Connect the test cable to the [CD CONTROL] terminal to perform the test.
OK ! (Refer to the following diagram.)
• DSP sheet ~ CONTROL (CTRL) sheet communication test

OK ! (There is the same test for communication from the CONTROL (CTRL) sheet.)
Read Test Read Test

• CD Read test using the test CD (Not used in the field.)
OK !
• Test tone playback test. Check the headphone playback sound without the speakers.
L: COS, R: SIN 1,760 Hz Use the [-/NO], [+/YES] buttons to change the frequency. 110/440/1760/7040 Hz
Make sure there is no playback sound distortion.
Digital I/O Test Cable Wiring Diagram

1 2
Connect the MINI DIN 6P plug to the [CD CONTROL]

3 4 terminal according to the diagram, and test.
5 6 Wire between the 1-5-4 pins.

Wire between the 2-6-3 pins.
55
DGC1B
CONTROL (CTRL) SHEET TEST

• CONTROL (CTRL) sheet test screen
V4.41 Apr 9 2002 Test & Loader : V3.00

PLY GP PLY GP
Version No. check (Left: controller sheet version No./Right: test program version No.)
Controller type: Self-diagnosis display, cannot change the settings.
LCD display “JPN” (Japanese)/“ENG” (English) Use the [L] and [R] buttons to change settings. Select “ENG”.
Re-record/Playback only type: Self-diagnosis display, cannot change the settings.
Piano type GP/UP/GT2/GT7 Change settings: Use the [-/NO] or [+/YES] buttons to select “GP.”
Silent function Change settings: Use the [DRIVE] button to select nothing.
Ensemble sound type: Self-diagnosis display, cannot change the settings.
• 7-segment LED and operation button LED lighting test
• LCD test Alternate left/right screen display
• Buzzer sound test 2 Buzzer sounds

1000 Hz 2000 Hz
• Operation button/remote control switching test

Each button switch No. will be displayed on the 7-segment LED.
• CONTROL (CTRL) sheet

wait 30 sec. wait 15 sec. OK!
RAM test (There is no
memory to clear.)
• CONTROL (CTRL) sheet Flash Memory
Sect = 0C050000 OK! (0%) ....................... Write/Read test
This test will take approximately 10 minutes.
• CONTROL (CTRL) sheet Flash Normal operations cannot be used during this
OK! (FD52F97D) Memory Read test time. (There is no memory to clear.)
[MIDI] • [TO HOST] terminal test (Not used in the field.)

Use the [HOST SELECT] switch to change between the [MAC], [PC2], [PC1], and [MIDI] displays.
• MIDI communication test

(Connect a cable between the [MIDI OUT] and [MIDI IN] terminals to perform the test.)
• Control unit ~ PK-CTL sheet communication test

(Do not use the keyboard or pedals.)
• Control unit ~ DB51 sheet communication, Sound output test

Connect the headphones, and check the L/R sound functions at the same time as the L/R displays.
• CONTROL (CTRL) sheet ~ DSP sheet communication test
• FDD test (Not used for field service.)

(Do not tamper with the FD data.)
• FDD test (Not used for field service.)
• Check the date and time.
56
DGC1B
PK-CTL SHEET TEST
• PK-CTL sheet test screen
• Version No. display

V 1 . 03 02. 01. 29
• Pedal-sensing data display

S=029 L=029 The data will be displayed after depressing the pedals.
(S: Shift pedal/L: Loud pedal)
• Foot controller test
SW Type ON Switch type: ON (depress)/OFF (release)
Vol Type 000% Volume type: 30 ~ 100% (use the foot pedal)
• PK-CTL sheet ROM test
OK!
• PK-CTL sheet RAM test

OK!
• PK-CTL sheet EEP-ROM test

OK! (Memory data will not be deleted.)
Press the Selector button four (4) times.

1 [VOLUME]
2 [TEMPO]
3 [TRANSPOSE]
4 [BALANCE]
R
Cleared • PK-CTL sheet EEP-ROM clear
→ → EEP ROM!! ∗Memory data will be deleted.
MN SHEET TEST
• MN sheet test screen
MN + A ROM V1.20 • Version No. display

’00.02.23
ERROR HISTORY
• The error conditions will be displayed.
LOUD PEDAL TIME OUT COUNT=002
SOFT PEDAL TIME OUT COUNT=001
• Display contents...Error No. in frequency order/Error message/Number of error occurrences

• Operation ...... Press the [PLAY/PAUSE] button to display the error items, press the [STOP] button to display the
number of occurrences, and then press the [REC] button followed by the [R] button to clear the error history.
Re-display
57
DGC1B
MAINTENANCE MODE (MENU)
PRESS + Power GP **
REV FWD P (Playback Models)
or
R (Full-function Models)
S (with Silent)
PRESS R button
Important test item
1. Minimum-pressure single-note check.
Playability check
13. Sustain pedal (Half pedal) time check.
14.15. Sustain pedal half point hold check.
R
Adjustment item
Minimum-pressure check 1. 1 key correction
Adjustment of playback 2. All key correction
Data minimum value
R
Sustain pedal measurement
Re-writing of table data for
sustain pedal Should be performed each time
the piano is serviced
Half point manual adjustment
R Adjustment
Mute time: 1.5 sec.
Maintenance Mode 03 - Loud (Right) pedal measurement
Sustain pedal measurement

DRIVE
Playback Models Pow: Drive power applied to solenoid
LOUD MEASURE Pos: Current position of the pedal
Pow–XX Pos–XXX
LOUD HP–XXX Sustain pedal range display

XXX XXX XXX XXX
Adjust 1.5sec Sustain pedal half point adjustment

and PRESS [REC] Manual adjustment through mute time of sustain pedal half point
–/NO +/YES
Adjust the mute time to 1.5sec by using the dial
LOUD PEDAL
HARF POINT – XX Show the half point data
Playback
Models DRIVE +/YES
–/NO Restore the data and quit
LOUD PEDAL Press the REC button. In the case of quitting the function without
OK! ( PASS XXX ) pressing the REC button.
END!
PASS number display
Take appropriate action corresponding to the PASS number, if it is
* MAINTENANCE * displayed after measurement.
*** MODE GP ***
58
DGC1B
* * SOFT PEDAL * * Re-writing of table data for Shift pedal measurement

* * MEASUREMENT * shift pedal Should be performed each time
Measurement of mute position the piano is serviced.
R
Maintenance Mode 04 - Shift (Left) pedal measurement
* * SOFT PEDAL * *
* * MEASUREMENT *
Soft pedal measurement
SOFT MEASURE
Pow: Drive power applied to solenoid
Pow–XXX Pos–XXX Pos: Current position of the pedal
SOFT MUTE–XXX
XXX XXX XXX XXX
Soft pedal range display
END! PASS number display

Take appropriate action corresponding to the PASS number, if it is
* MAINTENANCE * displayed after measurement.
*** MODE GP ***
* * * KEYBOARD * * * Re-writing of table data for Keyboard measurement

* * MEASUREMENT * keyboard
Following delivery or adjustment of the action,
R
or uneven pianissimo.
Maintenance Mode 05 - Keyboard measurement

Reason for keyboard measurement
* * * KEYBOARD * * *
* * MEASUREMENT * Improvement of minimum pressure playback through the piano
action regulation also depends on the condition of the piano action
regulation, and the keyboard playback table (which matches the
condition of the action).
KEYBOARD MEASURE
PDL–01 PHS–01
Keyboard measurement shuld be carried out when:
• the piano is delivered and installed
CALCULATION ! • when piano action regulation has been carried out
• when instability of pianissimo passages in detected in automatic
playback
OK !
PRESS [STOP] Measurement phases
* There are 5 kinds of measurement phases.
01 (minimum pressure) ~ 05 (fortissimo)
END! * Each measurement phase measures four pedal ON/OFF
conditions as listed below.
* Calculation starts after the measurement.
* MAINTENANCE *
*** MODE GP *** Push 'YES' button for displayed PASS No. and which key No.
when PASS occurs
Piano tables condition/PASS

number check
R
59
DGC1B
Display only
Display only
Display of playback table in

the memory
R
Pedal record/play mode
Keyboard damping data

adjustment
R
Power OFF
60
DGC1B
• Pass Numbers and Error Messages

Pedal Pass Numbers
PASS No. Pedal play-
Message Causes Countermeasure
Sustain Soft/shift backmode
0 1 LOUD (SOFT) Data has been erased or corrupted Measure again SW

CHECK SUM ERROR
2 – ADJUST LOUD PEDAL Too much of lost motion for sustain pedal Pedal acoustic adjustment SW
3 – ADJUST LOUD PEDAL Too little lost motion for sustain pedal Pedal acoustic adjustment SW
LOUD (SOFT) Pedal measurement
6 7 SENSOR ERROR Pedal A/D value = 0 Check the sensor condition SW
LOUD (SOFT)
8 9 PEDAL OVER WEIGHT The pedal is too heavy Pedal acoustic adjustment SW
LOUD (SOFT) Unusual sensor condition Pedal measurement
10 11 SENSOR ERROR Pedal is depressed during measurement Check the sensor condition SW
124 – ADJUST HALF POINT Pedal half point could not be found Perform the half point measurement HP
127 127 Normal HP

* Pedal measurement should always be done after finishing the above countermeasures
Keyboard Pass Numbers

PASS No. Condition Countermeasures
00 Nomal
01 Pedal movement problem Pedal acoustic adjustment, Pedal measurement
02 Acoustic adjustment problem Piano acoustic adjustment
03 Hammer sensor problem Check the hammer sensor (sensor test)
04
10, 20, 30 Key drive problem Check key drive unit
Hammer sensor problem Check the hammer sensor (sensor test)
11, 21, 31 Pedal movement problem Pedal acoustic adjustment, Pedal measurement
12, 22, 32 Acoustic adjustment problem Piano acoustic adjustment
13, 23, 33 Hammer sensor problem Check the hammer sensor (sensor test)
14, 24, 34
Key sensor problem Check the key sensor (sensor test)
17, 27, 37 Pedal movement problem Pedal acoustic adjustment, Pedal measurement
18, 28, 38
19, 29, 39 Connector problem Perform each measurement again
while the power is ON
The Playback Conditions when Pass has occured

PASS No. Condition
00 All kinds of measurement phases (5 kinds) were used when calculating
01~03 4 kinds of measurement phases were used
04 3 kinds of measurement phases were used
10~19 The same table data of the next (black/white) before was used
20~29 The same table data of the next but one (black/white) before was used
30~39 Emergency table data was used
61
DGC1B
• Error Numbers and Messages

Controller board
No. Message Description No. Message Description
ERROR OCCURRED !! Rear buffer overflow ERROR OCCURRED !! End of file
60 (PUSH STOP KEY!) 83 (PUSH STOP KEY!) (Disk error)
ERROR OCCURRED !! Front buffer overflow ERROR OCCURRED !! File not opened
ERROR OCCURRED !! 500 msec delay buffer overflow ERROR OCCURRED !! File already opened
–DISPLAY ERROR DATA– ERROR OCCURRED !! Illegal sector no.
63 86 (PUSH STOP KEY!) (Disk error)
PIANO DISCONNECT Piano disconnect when recording ERROR OCCURRED !! File name already exists
64 REC ERROR! 87 (PUSH STOP KEY!) (Disk error)
MIDI DISCONNECT MIDI disconnect when recording UNFORMATTED DISK! Unformatted disk inserted
65 REC ERROR! 88 (Disk error)
PIANO IN/OUT Piano IN data receive error ERROR OCCURRED !! Illegal record no.
66 DATA ERROR! 89 (PUSH STOP KEY!) (Disk error)
MIDI IN/OUT MIDI IN data receive error INSERT DISK! Disk not ready
67 DATA ERROR! 90 (Disk error)
PIANO IN/OUT Piano IN/OUT buffer overflow DISK WRITE Write protected
68 DATA ERROR! 91 PROTECTED! (Disk error)
MIDI IN/OUT MIDI IN/OUT buffer overflow ERROR OCCURRED !! Allocation error
69 DATA ERROR! 92 (PUSH STOP KEY!) (Disk error)
REPEAT 255 TIMES The disk or a song on the disk has repeated DISK FULL! Directory full
70 ALREADY! a maximum of 255 times in a row 93 (Disk error)
CANNOT PAUSE IN Use of pause when recording in MDR mode DISK FULL! Disk full
71 THIS MODE! 94 (Disk error)
ERROR OCCURRED !! Song file setting error ERROR OCCURRED !! Disk read / write error
CANNOT CONVERT! Convert error ERROR OCCURRED !! Disk read / write error
CANNOT FORMAT! Format error ERROR OCCURRED !! FAT read / write error
FILE NOT FOUND! File which is stored in piano ERROR OCCURRED !! File not found
81 RE-CONVERT DISK! DIR file is not found 98 (PUSH STOP KEY!) (Disk error)
CONVERT DISK! Unsuitable disk format DIR file is not found TRAP! System program malfunction
82 99
PK-CTL board - Protect Function

No. Message Causes Contents and countermeasures
06 LOUD PEDAL The keyboard & sustain, soft / shift pedal playback The sustain pedal solenoid continually requiries excessive drive
TIME OUT!! stop → Press STOP button to reset voltage to function. → Check sustain pedal acoustic adjustment
07 SOFT PEDAL Soft / shift pedal playback stop → Turn power off The soft / shift pedal solenoid continually requiries excessive drive
TIME OUT!! then back on to reset voltage to function. → Check soft / shift pedal acoustic adjustment
08 SENSOR LCD display only. Recording and Keyboard Data communication between emitter and receiver is not done when
LED ON ERROR! measurement cannot be performed LEDs are ON. → Check each connector
09 SENSOR LCD display only. Recording and Keyboard Data communication between emitter and receiver is not done when
NOT CONNECTED! measurement cannot be performed LEDs are OFF. → Check each connector
11 SOFT PEDAL LCD display only. The acoustic adjustment of the soft pedal is not correct → Check
MUTE ERROR!! pedal adjustment
12 LOUD PEDAL OVER The keyboard & sustain, soft / shift pedal playback Sustain pedal movement and operation is not within acceptable range.
LOAD! ERROR! stop → Press STOP button to reset → Check the acoustic pedal adjustment and pedal sensor board.
13 SOFT PEDAL OVER Soft / shift pedal playback stop → Turn power off Soft / shift pedal movement and operation is not within acceptable range.
LOAD! → DISABLE! then back on to reset → Check the acoustic pedal adjustment and pedal sensor board.
14 PIANO POWER OFF! The keyboard & sustain, soft / shift pedal playback 100V of power to Keyboard and pedal drive OFF.
(THERMOSTAT) stop. Playback functions cannot be restored until the Either the sustain or soft / shift solenoid thermostat has activated because
solenoid has cooled down sufficiently. the solenoid become too hot. → Check pedal acoustic adjustment or
replace the broken thermostat.
15 PIANO POWER OFF! The keyboard & sustain, soft / shift pedal playback 100V (120V for Grand) of power to Keyboard and pedal drive OFF.
(PWM OVER) stop. Playback functions cannot be restored until the One or more key drive transistors have become too hot and the protect
drive transistor(s) has/have cooled down sufficiently circuit has activated. → Check the drive board.
and the power has been turned off, then turned back
on.
62
DGC1B
ERROR MESSAGES
While operating your Disklavier an error message may appear in the display. If an error message appears,
refer to the table below for an explanation of the message.
Note: This table does not explain every error message.
PianoSoft songs are write-protected and cannot be

re-recorded.
The current function cannot be executed because

protected files exist on the floppy disk.
No more song data can be recorded onto the floppy disk

because the disk is full.
Use another floppy disk.
The current function cannot be performed because the

floppy disk’s erasure protection tab is set to “protected.”
Set the disk’s erasure protection tab to “unprotected.”
No more song data can be recorded onto the disk because

the disk is nearly full.
No more than 60 songs can be recorded onto an E-SEQ

type disk.
No more than 99 songs can be recorded onto an SMF

type disk.
The current function cannot be performed because this

disk contains no songs or only one song.
A wrong floppy disk has been inserted as the destination

disk. Insert the correct floppy disk.
The floppy disk is either new and has not yet been
formatted for use with the Disklavier or uses a format not
recognized by the Disklavier.
Format the floppy disk.
In order to be copied, the destination disk must be the
same format as the floppy disk.
You must select the track you want to record before

recording.
Only E-SEQ files can be recorded onto an E-SEQ type

disk.
The disk may be damaged.

Press the Stop key to clear the message.
If this message appears frequently with other disks as
well, contact your nearest Yamaha service representative.
63
DGC1B
PEDAL ADJUSTMENT PROCEDURE ( MK3 )
Inside the piano unit is a label containing the pedal adjustment procedures. Please refer to this label for the proper
adjustment procedure.
The label is attached to the inside cover of the pedal drive unit
PEDAL ADJUSTMENT PROCEDURES

(1) Check and adjust (L) measurement to the following
standard.
Damper pedal: 15 ± 0.5 mm
Shift pedal: 15.5 ± 0.5mm
Loosen the pedal nut (A).
Rotate the connecting rod (B) up to the standard above.
Then, tighten the nut (A) to lock it.
(2) Adjust the cap nut (C) to the following standard.
Damper pedal: 2 mm of gap between the damper
levers and the lifting rail.
Shift pedal: No lost motion
(3) Adjust the capstan button (D) so that the gap (L)
becomes 1.5 ± 0.5 mm
when each pedal is fully.
depressed.
(Be sure to confirm that hammers should strike two
strings in case of the shift pedal is depressed.)
Note:
When using disklavier a certain period of time,
the green pedal cloth at back underneath of the
(right) pedal may be pressed and causes the
solenoid stroke room (L) becomes wider than
standard.
In the case, it must be adjusted the (L)
measurement as instructed above first in order
to place the sensor at the correct position. Then
adjust the rod cap nut (C) for the acoustic
adjustment.
DIP SWITCH ON MN BOARD
The DGC1B include a 4-bit DIP-switch on the MN board. The all switch bits (SW1-SW4) are being set to OFF
at the time of factory shipping.
64
DGC1B
WRITING NEW PROGRAM TO FLASH MEMORY
A new version of the system program may be supplied from time to time in order to improve the functionality and
performance of the control unit.
The DGC1B control unit, key and pedal drive unit, key sensor unit and amplifier unit each incorporate a separate
CPU, with each unit running under the control of a dedicated program.
The system program version update involves update of a portion of the control unit control program.
For the SEP prior to HQ-SXG, the version is updated by replacing the ROM, however with the DGC1B the
update is achieved by transferring the new program from a floppy disk to the flash memory in the DGC1B by
operation from the panel on the control unit.
The updated system program is retained in memory during operation, and while power is OFF.
(See the following page for operating procedure.)
∗ If power is switched OFF, or the disk is removed from the floppy disk drive, during the version update, the
update will be incomplete and the system will not operate correctly when power is switched ON again.
Switch power ON while pressing the [PLAY/PAUSE] button again and repeat the version update procedure.
Version Update Table

Unit Circuit board Version update method
Control unit CONTROLLER circuit board, DSP circuit board Use update disk.
Key sensor unit SENSOR circuit board Use update disk.
Key and pedal drive unit PK-CTL circuit board Use update disk.
MN circuit board Replace MN circuit board, replace ROM IC
Amplifier unit
DB circuit board Replace DB circuit board
∗ Make the update disk by downloading the latest program from the YSISS website.
65
DGC1B
• Program Update Procedure
Power ON +
Power on while pushing the [PLAY/PAUSE] button.
PLEASE WAIT Starting the UPDATE mode.
CONTROLLER C.B.
CTRL system V4.41
*UPDATE (ENT) When the display appears for the circuit board that
you wish to rewrite, push [ENTER] button.
PK-CTL C.B.
KEY system V1.03
*UPDATE (ENT)
SENSOR C.B.
SNSR system V1.00
*UPDATE (ENT)
DSP C.B.
DSP system V1.21
*UPDATE (ENT)
ENTER Push [ENTER] button.
REWRITE SYSTEM PROGRAM

(ENT)
ENTER Push [ENTER] button.
INSERT UPDATE DISK! Insert the UPDATE DISK.
PLEASE WAIT
Current virsion New virsion Current virsion New virsion

V*.** → V*.** V*.** → V*.**
CTRL-SURE? (YES, NO) KEY-SURE? (YES, NO)
-/NO +/YES -/NO +/YES
V*.** → V*.** V*.** → V*.**

DO NOT REMOVE DISK xxxx DO NOT REMOVE DISK xxxx
xxxx: countdown xxxx: countdown
PLEASE WAIT PLEASE WAIT
66
DGC1B
Current virsion New virsion

V*.** → V*.**
SNSR-SURE? (YES, NO)
-/NO +/YES
V*.** → V*.**
DO NOT REMOVE DISK xxxx
xxxx: countdown
PLEASE WAIT
Current virsion New virsion

V**.** → V**.**
DSP-SURE? (YES, NO)
-/NO +/YES
V**.** → V**.**
DO NOT REMOVE DISK xxxx
xxxx: countdown
PLEASE WAIT
CANCEL COMPLETE
Turn OFF, Turn ON again! Turn OFF, Turn ON again!
Eject UPDATE DISK Eject UPDATE DISK
Power OFF Power OFF
67
DGC1B
RESETTING YOUR DISKLAVIER
If you want to return your Disklavier to its initial factory settings, follow the Reset function below.
Resetting Your 4 Use the [–/NO] and [+/YES]

Disklavier buttons to select the item that
you want to reset. Then press
[ENTER].
You can reset all settings, the Memory Disks, or
both.
Option Description
Setup All settings (See next page.)
Memory Memory disk number [X] and
1 Specify a disk. Disk [X] + all settings (SMF format;
Setup sample song included) (See
When you select a Memory Disk, the reset also next page.)
function will be effective for the selected Memory Memory disk number [X]
disk only. Disk [X] only (SMF format; sample
If you select Memory Disk 0, the disk is song included)
reset in SMF format, and an “opening” Factory init. All Memory Disks are ret-
song or songs are automatically re-recorded setting urned to initial factory settings
on the disk. If you select Memory Disk 1 The table on the next page lists the default
to F, the disks are reset in SMF format, and settings for the items that can be reset.
nothing is recorded on the disk.
5a If you selected Setup, Memory
Disk [X] + Setup or Memory Disk
2 Press [FUNC.]. [X], press [+/YES] when a display
similar to the following appears.
The FUNC. indicator lights and the
Function menu appears.
3 Press [ ] until the cursor is next

to the Reset option, then press 5b If you selected Factory init.
[ENTER]. setting, press [ENTER] when the
following display appears, then
The following display appears. press [+/YES].
68
DGC1B
Forced Reset 2 Reset the Memory Disk as

When the message “UNFORMATTED described above.
MEMORY DISK” appears, this indicates that all
Memory Disks are damaged. Note: If you accidentally turn off the Control Unit
while data is being stored to a Memory Disk,
1 In the Reset display, press [ENTER]. one or all Memory Disks may be damaged.
They can only be recovered by returning them
The following display appears. to initial factory settings.
Note: Be sure to keep a backup of important data.
Note: You cannot back up write-protected songs
such as PianoSoft and PianoSoft.Plus songs
onto floppy disks.
Parameter Default Options

General
Volume 0 -10 to 0
Tempo 0 -50 to +20
Transpose 0 -24 to +24
Repeat OFF ALL, RPT, RND, A-B
Pedal Cancel PD on PDoff, PD on
Voice
Basic Voice 001 001 to 128
Variation Voice 0 0 to 101 (depending on basic voice)
Vol 100 000 to 127
Metronome
Click ON OFF, ON
Tempo 117 30 to 400
Beat 4/4 1/4 to 9/4
Pedal Count OFF OFF, ON
M-Tune
TG Master Tune 00 -50 to 00 to +50
BALANCE
TG Master Balance 100 0 to 127, OFF
CD Master Balance 64 0 to 127, OFF
MIDI Setup
Piano Rcv Ch 01 ##, 01 - 16, 1+2, Prg, Prg(all)
Delay In (500 ms) ON ON, OFF
Import File L Prg ##, 01 - 16, Prg, Prg(all)
Import File R Prg ##, 01 - 16, Prg
Piano Part ESBL Out OFF OFF, ON
MIDI Out KBD OUT ESBL Out, KBD Out, Thru Port2
Out Ch 01 01 to 16
Split OFF OFF, A1 to C7
Trans L 00 -60 to 00 to +60
Trans R 00 -60 to 00 to +60
Remote Out OFF OFF, ON
Remote In OFF OFF, ON
Local ON OFF, ON
69
DGC1B
TROUBLESHOOTING
If you are having difficulty operating your Disklavier, see if any of the symptoms listed below apply to
your problem and follow the recommended remedy.
Power Playback
You cannot turn on the Disklavier. None of the playback functions can be
• Make sure the power cord is connected to a used.
suitable AC outlet. • Insert a Disklavier song disk into the disk
• Switch on the Disklavier’s “MAINS” switch. drive.
• Press the [STANDBY / ON] button and turn
on the Control Unit. Songs are played back at the wrong
• If the Disklavier still cannot be turned on, tempo or in the wrong key.
disconnect it from the AC wall outlet, and • Reset the tempo or transposition functions.
consult your Disklavier dealer. Once the tempo or transposition functions
have been set, they will affect playback of all
songs until another disk is inserted, or they are
Control Unit reset.
Songs are not played back in the normal

The Control Unit does not appear to song order.
work correctly. • Check that the “RND” and “RPT” repeat
• Turn off the Control Unit, wait 5 seconds, then functions are off.
turn it back on.
If the problem continues, consult your You selected a song using the remote
Disklavier dealer. control’s number pad, but the last song
on the disk is selected.
• If a song number higher than the last song
Remote Control number on the disk is specified, the last song
will be selected.
You cannot control the Disklavier using A search time is specified using the
the remote control. remote control, but the end of the song is
• Make sure that you are pointing the remote selected.
control at the Control Unit’s remote control • If a time value higher than the total length of
sensor. the song is specified, the end of the song will
• Make sure that you are within the remote be selected.
control’s specified operating range.
• Make sure that the remote control’s batteries During playback, complex note trills and
have been installed correctly. faint pianissimo passages are
• Check the condition of the remote control’s occasionally missed.
batteries.
70
DGC1B
• Increase the Disklavier’s volume level. Pedal

The Disklavier lowers the playback volume by
reducing the force applied to each hammer. So
for notes that are already quiet (pianissimo, During playback, the pedals do not
etc.), when the playback volume is reduced operate.
there may not be enough force applied to a • Check that the pedal cancel function is not set
hammer for it to strike the strings. to “PDoff.”
• The sustain pedal is not made to move. Only
The metronome does not sound during the internal mechanism operates.
song playback.
• Check that the song uses a measures and beats
time format. If not, the metronome will not Tone Generator (Ensemble
sound. Playback)
When you play back a song you
downloaded from the internet, the volume During Ensemble song playback, the
of the piano parts is too loud. Ensemble parts cannot be heard.
• Song data created for use with other electronic • Make sure that the amp’s volume control is set
instruments often include sound with high to an appropriate level.
velocity (loudness). Edit the volume of the • Readjust the volume balance.
track containing high velocity.
The pitch of the Disklavier and internal
XG tone generator do not match.
• Use the TG Master Tune function to tune the
PianoSmart
internal XG tone generator.
Pianosmart fails to work (fails to The TG Master Balance function does

synchronize). not adjust the volume of the internal XG
• Check whether the CD is the same as the tone generator.
number of the CD printed on the Smart • Make sure that the BALANCE parameter is
PianoSoft package, etc. set to OFF.
• When the songs are all the same even if the
CD is different, copy Smart PianoSoft onto the
Recording
memory disk, and execute “Change to a
different CD.”
• When a copied CD and Smart PianoSoft are to When recording the second part of an L/
be played simultaneously, their playback R song, the first part will not play back
timing may not coincide. for monitoring.
• Set the Monitor Piano option to ON.
71
DGC1B
When recording a new part to an Disk Utilities

existing track, the new part replaces the
existing parts.
• Set the Record Tr option to OVERDUB. You cannot copy a song in a Memory
Disk onto a floppy disk.
You cannot re-record. • Copy-protected songs in a Memory Disk
• Re-recording is not possible on protected disks cannot be copied onto a floppy disk. They can
such as PianoSoft and PianoSoft.Plus disks. only be copied onto another Memory Disk.
• Make sure that the floppy disk’s erasure tab is
set to “unprotected.”
Connection with External
Devices
The Disklavier cannot send and receive

MIDI data with other MIDI instruments.
• Make sure the MIDI cables are connected
properly.
A MIDI loop was accidentally created

when you connected a computer to the
MIDI OUT connector on your
Disklavier, so that song data is sent back
and forth between the computer and
piano.
• Set MIDI Out to KBD Out.
72
DGC1B
YAMAHA [Disklavier] MIDI IMPLEMENTATION CHART Date : 01-Feb-2000
Model: Mark III Playback Version : 1.00
Function... Transmitted Recognized Remarks
Basic Default × 1-16 Memorized

Channel Changed × 1-16
Default × 3
Mode Messages × 3, 4 (m=1) *2, *3
Altered **************** ×
Note × 0-127
Number : True voice **************** 0-127
Velocity Note ON × O v=1-127

Note OFF × O
After Key s × O *1, *2

Touch Ch s × O *1, *2
Pitch Bend × O 0-24 semi *1, *2

0, 32 O O *1, *2 Bank Select
7, 11 O O *1
1, 5, 10 × O *1, *2
6, 38 × O *2 Data Entry
64 × O Hold1 (Sustain)
Control 65 × O *2 Portament
66 × O *2 Sostenuto
Change 67 × O Soft (Shift) Pedal
71-74, 84 × O *2
91, 93, 94 × O *2 Effect Depth
96-101 × O *1, *2
Prog O 0-127 O 0-127 *2

Change : True # ****************
System Exclusive O O
: Song Pos O *1 O *1
Common : Song Sel O *1 O *1
: Tune × ×
System : Clock O ×
Real Time : Commands O *1 O *1
Aux : All Sound OFF O O (120, 126, 127)
: Reset All Cntrls × O (121)
: Local ON/OFF × O
: All Notes OFF O O (123-125)
Mes- : Active Sense O O
sages : Reset × ×
Notes *1 = Received (transmitted) if switch is on.
*2 = Only ESBL Part can recognize.
*3 = m is always treated as 1 regardless of its value.
Mode 1 : OMNI ON. POLY Mode 2 : OMNI ON. MONO O : Yes

Mode 3 : OMNI OFF. POLY Mode 4 : OMNI OFF. MONO × : No
73
DGC1B
MIDI Data Format

If you are familiar with MIDI, or are using a computer to control your music software with computer-generated
MIDI messages, the data provided in this section can help you to control your Disklavier.
Messages include those that can be received by the piano part and/or those that can be received by an ESBL part.
Messages that can be transmitted as well as received are shown as “transmitted”.
1. CHANNEL MESSAGES 1.2.7 Expression
(Piano Part, ESBL Part)
1.1 Key On / Key Off
(Piano Part, ESBL Part) (transmitted) Cntrl# Parameter Data Range
11 Expression 0...127
Piano Part reception note range = A-1~C7 : C3=60
ESBL part reception note range = C-2~G8 1.2.8 Hold1
Velocity range = 1~127 (Only the Key On velocity is received) (Piano Part, ESBL Part) (transmitted)
1.2 Control Change Cntrl# Parameter Data Range
1.2.1 Bank Select 64 Hold1 0...127
(ESBL Part) (transmitted) (0-63:off, 64-127:on)
1.2.9 Portamento
Cntrl# Parameter Data Range
(ESBL Part)
0 Bank Select MSB 0: Normal,
63: User voice, Cntrl# Parameter Data Range
64: SFX, 65 Portamento 0...127
126: SFX kit, (0-63:off, 64-127:on)
127: Drum
1.2.10 Sostenuto
32 Bank Select LSB 0...127
(Piano Part, ESBL Part) (transmitted)
You can select the Voice banks with MSB and LSB numbers.
MSB and LSB functions differently depending on the play
66 Sostenuto 0...127
mode.
(0-63:off, 64-127:on)
In XG mode, MSB numbers select Voice type (Normal Voice or
Drum Voice), and LSB number select Voice banks. 1.2.11 Soft Pedal
In TG300B mode, LSB is fixed, and MSB numbers select Voice (Piano Part, ESBL Part) (transmitted)
banks.
(See Normal Voice List Drum Voice List.)
67 Soft Pedal 0...127
A new bank selection will not become effective until the next
(0-63:off, 64-127:on)
Program Change message is received.
1.2.12 Harmonic Content
1.2.2 Modulation (ESBL Part)
(ESBL Part)
Messages which adjust the resonance set for each Voice.
1 Modulation 0...127 Cntrl# Parameter Data Range
71 Harmonic Content 0...127
1.2.3 Portamento Time (0:-64, 64:+0, 127:+63)
(ESBL Part)
Higher values will result in a more characteristic, resonant
Cntrl# Parameter Data Range sound.
5 Portamento Time 0...127
Depending on the Voice, the effective range may be narrower
When the parameter 1.2.9 Portamento = ON, values will adjust than the range available for adjustment.
the speed of pitch change.
1.2.13 Release Time
A setting of 0 - minimum portamento time, and 127 - maximum
(ESBL Part)
portamento time.
1.2.4 Data Entry Messages which adjust the envelope release time set for each
(ESBL Part) Voice.
Messages which set the value for the parameter specified by Cntrl# Parameter Data Range
RPN/NRPN. 72 Release Time 0...127
(0:-64, 64:+0, 127:+63)
Cntrl# Parameter Data Range 1.2.14 Attack Time
6 Data Entry MSB 0...127
(ESBL Part)
38 Data Entry LSB 0...127
Messages which adjust the envelope attack time set for each
Parameter value is determined by combining MSB and LSB. Voice.
1.2.5 Main Volume
(Piano Part, ESBL Part) (transmitted)
73 Attack Time 0...127
Cntrl# Parameter Data Range (0:-64, 64:+0, 127:+63)
7 Main Volume 0...127 1.2.15 Brightness
1.2.6 Pan (ESBL Part)
(ESBL Part) Messages which adjust the filter cutoff frequency set for each
Cntrl# Parameter Data Range Voice.
10 Pan 0...127
74
DGC1B
Cntrl# Parameter Data Range rr : drum instrument note number

74 Brightness 0...127 $16 $rr $mm Drum EG Attack
(0:-64, 64:+0, 127:+63) mm : $00 - $40 - $7F (-64 - 0 - +63)
1.2.16 Portamento Control rr : drum instrument note number
(ESBL Part) $17 $rr $mm Drum EG Decay Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
Messages which apply a portamento between the currently- rr : drum instrument note number
sounding note and the subsequent note. Applies to both Decay1 and 2.
Cntrl# Parameter Data Range $18 $rr $mm Drum Instrument Pitch Coarse
84 Portamento Control 0...127 mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
1.2.17 Effect1 Depth (Reverb Send Level) $19 $rr $mm Drum Instrument Pitch Fine
(ESBL Part) mm : $00 - $40 - $7F (-64 - 0 - +63)
91 Effect1 Depth 0...127 $1A $rr $mm Drum Instrument Level
mm : $00 - $7F (0 - max)
1.2.18 Effect3 Depth (Chorus Send Level) rr : drum instrument note number
(ESBL Part) $1C $rr $mm Drum Instrument Pan
Cntrl# Parameter Data Range mm : $00 - $40 - $7F (random, left -
93 Effect3 Depth 0...127 center - right)
1.2.19 Effect4 Depth (Variation Effect Send Level)
$1D $rr $mm Drum Instrument Reverb Send Level
(ESBL Part)
mm : $00 - $7F (0 -max)
94 Effect4 Depth 0...127 $1E $rr $mm Drum Instrument Chorus Send Level
mm : $00 - $7F (0 - max)
1.2.20 Data Increment / Decrement (for RPN)
(ESBL Part)
$1F $rr $mm Drum Instrument Variation Send Level
Cntrl# Parameter Data Range mm : $00 - $7F (0 - max)
96 RPN Increment 0...127 rr : drum instrument note number
97 RPN Decrement 0...127 MSB 14H- 1FH (for Drum) is valid only if the Multi Part
1.2.21 NRPN (Non-Registered Parameter Number) parameter PART MODE = DRUMS 1 or DRUMS2 for that
(ESBL Part) channel. (If PART MODE = DRUM, no values will be changed.)
Cntrl# Parameter Data Range 1.2.22 RPN (Registered Parameter Number)
98 NRPN LSB 0...127 (ESBL Part)
99 NRPN MSB 0...127
First send the NRPN MSB and NRPN LSB to specify the 100 RPN LSB 0...127
parameter which is to be controlled. Then use Data Entry to set 101 RPN MSB 0...127
the value of the specified parameter.
The following RPN numbers can be received.
* Note that once the NRPN has been set for a channel
subsequent data entry will be recognized as the same NRPN’s RPN Data entry
value change. Therefore, after you use the NRPN, you should set MSB LSB MSB LSB PARAMETER NAME and VALUE
a Null (7FH, 7FH) value to avoid an unexpected result. RANGE
00H 00H mmH — Pitch Bend Sensitivity
The following NRPN number can be received. mm:00-18H (0-24 chromatic steps)
NRPN Data entry Assignable in chromatic steps up to
MSB LSB MSB PARAMETER NAME and VALUE 2 octaves
RANGE Default : 02H
$01 $08 $mm Vibrato Rate LSB value is ignored.
mm : $00 - $40 - $7F (-64 - 0 - +63) 00H 01H mmH 11H Fine Tuning
$01 $09 $mm Vibrato Depth mm: 00H-40H-7FH (-64-0-+63)
mm : $00 - $40 - $7F (-64 - 0 - +63) 00H 02H mmH — Coarse Tuning
$01 $0A $mm Vibrato Delay mm: 28H - 40H - 58H (-24 - +24
mm : $00 - $40 - $7F (-64 - 0 - +63) chromatic steps)
$01 $20 $mm Filter Cutoff Frequency LSB value is ignored.
mm : $00 - $40 - $7F (-64 - 0 - +63) 7FH 7FH — — RPN null
$01 $21 $mm Filter Resonance Cancels RPN and NRPN numbers
mm : $00 - $40 - $7F (-64 - 0 - +63) 1.2.23 Channel Mode Messages
$01 $63 $mm EG Attack Time
The following Channel Mode Messages can be received.
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $64 $mm EG Decay Time 2nd byte 3rd byte
mm : $00 - $40 - $7F (-64 - 0 - +63) 120 0 All Sound Off
$01 $66 $mm EG Release Time 121 0 Reset All Controllers
mm : $00 - $40 - $7F (-64 - 0 - +63) 123 0 All Note Off
$14 $rr $mm Drum Filter Cutoff Frequency 124 0 Omni Off
mm : $00 - $40 - $7F (-64 - 0 - +63) 125 0 Omni On
rr : drum instrument note number 126 0 ~ 16 Mono
$15 $rr $mm Drum Filter Resonance 127 0 Poly
mm : $00 - $40 - $7F (-64 - 0 - +63)
75
DGC1B
1.2.23.1 All Sound Off When Multi Part Parameter Rcv PITCH BEND CHANGE=OFF,
(Piano Part, ESBL Part) (transmitted) pitch bend for that part is not received.
ESBL part; 1.5 Channel Aftertouch
Terminates all sounds currently sounding on the specified (ESBL Part)
channel. However, the status of channel messages such as 1.6 Polyphonic Aftertouch
Note On and Hold On is maintained. (ESBL Part) (PianoPart) (transmitted)
Piano Part; Applying further pressure on the key does not output “key
The status of channel messages is not maintained. aftertouch” information. Instead, key position is transmitted as
additional information.
1.2.23.2 Reset All Controllers
(ESBL Part)
2. SYSTEM EXCLUSIVE MESSAGES
The values of the following controllers will be reset to the
defaults. 2.1 Parameter Change
CONTROLLER VALUE The Disklavier receives the following parameter change

Pitch Bend Change ±O (center) messages.
Channel Aftertouch 0 (off) [UNIVERSAL REALTIME MESSAGE]
Polyphonic Aftertouch 0 (off) 1) Master Volume
Modulation 0 (off)
Expression 127 (max) [UNIVERSAL NON REALTIME MESSAGE]
Hold l 0 (off) 1) General MIDI Mode On
Portamento 0 (off)
[XG NATIVE]
Sostenuto 0 (off)
1) XG System on
Soft Pedal 0 (off)
2) XG System Data parameter change
Portamento Control cancels the Portamento Source Key
3) Multi Effect1 Data parameter change
Number that was received
4) Multi Part Data parameter change
RPN number not specified; internal data
5) Drums Setup Data parameter change
will not change
NRPN number not specified; internal data [OTHER]
will not change 1) Master tuning
1.2.23.3 All Note Off 2) TG300 System Data Parameter change
(Piano Part, ESBL Part) (transmitted) 3) TG300 Multi Effect Data parameter change
4) TG300 Multi Part Data parameter change
Terminates all notes currently on for the specified channel.
2.1.2 Universal Realtime Messages
However, if Hold 1 or Sostenuto is on, notes will continue
sounding until these are turned off. 2.1.2.1 Master Volume
1.2.23.4 Omni Off
(Piano Part, ESBL Part) 11110000 F0 = Exclusive status
Performs the same function as when an All Notes Off message is 01111111 7F = Universal Real Time
received. 01111111 7F = ID of target device
00000100 04 = Sub-ID #1=Device Control Message
1.2.23.5 Omni On 00000001 01 = Sub-ID #2=Master Volume
(Piano Part, ESBL Part) 0sssssss *SS = Volume LSB
Performs the same function as when an All Notes Off message is 0ttttttt TT = Volume MSB
received. 11110111 F7 = End of Exclusive
or
1.2.23.6 Mono
11110000 F0 = Exclusive status
01111111 7F = Universal Real Time
Performs the same function as when an All Sounds on message 0xxxnnnn XN = Device Number, xxx = don’t care
is received, and if the 3rd byte (mono number) is in the range of 00000100 04 = Sub-ID #1=Device Control Message
0 - 16, sets the corresponding channel to Mono Mode (Mode 4 : 00000001 01 = Sub-ID #2=Master Volume
m = 1). 0sssssss SS = Volume LSB
1.2.23.7 Poly 0ttttttt TT = Volume MSB
(Piano Part, ESBL Part) 11110111 F7 = End of Exclusive
Performs the same function as when an All Sounds Off message When received, the Volume MSB will be effective for the
is received. and sets the corresponding channel to Poly Mode System Parameter MASTER VOLUME.
(Mode 3). * “SS” is the hexadecimal expression of Osssssss; same as for
“tt”, “aa”, etc.
1.2.24 Local Control
(Piano Part, ESBL Part) 2.1.3 Universal Non-Realtime Messages
0;Off Disklavier keyboard does not play the internal voices. 2.1.3.1 General MIDI Mode On
127;On (ESBL Part)
1.3 Program Change 11110000 F0 = Exclusive status

(ESBL Part) (transmitted) 01111110 7E = Universal Non-Real Time
01111111 7F = ID of target device
Messages for Voice selection. 00001001 09 = Sub-ID #1=General MIDI Message
With a combination of Bank Select, you can select not only basic 00000001 01 = Sub-ID #2=General MIDI On
Voice numbers, but also variation Voice bank numbers. 11110111 F7 = End of Exclusive
1.4 Pitch Bend or
(ESBL Part) 11110000 F0 = Exclusive status
76
DGC1B
01111110 7E = Universal Non-Real Time the Drum Setup parameter values will be initialized.
0xxxnnnn XN = Device Number, xxx = don’t care Selecting a Drum Set will cause the Drum Setup parameter
00001001 09 = Sub-ID #1=General MIDI Message values to be initialized.
00000001 01 = Sub-ID #2=General MIDI On
2.1.5 Other parameter changes
11110111 F7 = End of Exclusive
2.1.5.1 Master Tuning
When General MIDI Mode On is received. the play mode will
(ESBL Part)
be changed to XG mode.
When this happens, the ESBL part will receive the MIDI 11110000 F0 Exclusive status
messages which compatible with GM System Level 1, and 01000011 43 YAMAHA ID
consequently will not receive NRPN and Bank Select messages. 0001nnnn 1n Device Number
Since approximately 50ms is required to execute this messag, be 00100111 27 Model ID
sure to leave an appropriate interval before the subsequent 00110000 30 Sub ID2
message. 00000000 00
00000000 00
2.1.4 XG Native Parameter Change 0mmmmmmm mm Master Tune MSB
(ESBL Part) 0lllllll ll Master Tune LSB
With the Parameter Change messages as listed below, you can 0ccccccc cc
change the characteristic of a Voice, such as by Effect Type or 11110111 F7 End of Exclusive
effect parameter, transpose, tuning, and others. This message simultaneously changes the pitch of all channels.
11110000 F0 Exclusive status 2.2 Bulk Dump
01000011 43 YAMAHA ID (ESBL Part)
0001nnnn 1n Device Number The Disklavier receives the following bulk dump data.
01001100 4C XG Model ID
[XG NATIVE]
0aaaaaaa aaaaaaa Address High
1) XG System Data
0aaaaaaa aaaaaaa Address Mid
2) Multi Effect1 Data
0aaaaaaa aaaaaaa Address Low
3) Multi Part Data
0ddddddd ddddddd Data
4) Drums Setup Data
| |
11110111 F7 End of Exclusive [QS300 NATIVE]
1) QS300 User Normal Voice Data
* Any number is OK since the device number for the Disklavier
is fixed to “All”. 2.2.1 XG Native Bulk Dump
For parameters with data size of 2 or 4, transmit the appropriate 11110000 F0 Exclusive status
number of data bytes. 01000011 43 YAMAHA ID
When sending the parameter change messages consecutively, be 0000nnnn 0n Device Number
sure to leave an appropriate interval (if the time base is 480. ca 5 01001100 4C XG Model ID
unit) between the messages. 0bbbbbbb bbbbbbb ByteCount
2.1.4.1 XG System On 0bbbbbbb bbbbbbb ByteCount
(ESBL Part) 0aaaaaaa aaaaaaa Address High
0aaaaaaa aaaaaaa Address Mid
11110000 F0 Exclusive status 0aaaaaaa aaaaaaa Address Low
01000011 43 YAMAHA ID 0ddddddd dd Data
0001nnnn 1N Device Number | |
01001100 4C XG Model ID | |
0aaaaaaa 00 Address High 0ccccccc ccccccc Checksum
0aaaaaaa 00 Address Mid 11110111 F7 End of Exclusive
0aaaaaaa 7E Address Low
00000000 00 Data For the Address and Byte Count, refer to the supplementary
11110111 F7 End of Exclusive tables.
The Checksum is the value that results in a value of 0 for the
When this data is received. the Disklavier will switch to XG lower 7 bits when the Start Address, Byte Count, plus the
mode and all the parameters will be initialized accordingly, and Checksum itself are added.
XG-compatible messages such as NRPN and Bank Select
messages can be received. 2.2.1.1 XG System Data bulk dump
Since approximately 50ms is required to execute this message, (ESBL Part)
be sure to leave an appropriate interval before the subsequent See tables <1-1> and <1-2>.
message 2.2.1.2 Multi Effect1 Data bulk dump
2.1.4.2 XG System Data parameter change (ESBL Part)
(ESBL Part) See tables <1-1> and <1-3>.
See tables <1-1> and <1-2>. 2.2.1.3 Multi Part Data bulk dump
2.1.4.3 Multi Effect1 Data parameter change (ESBL Part)
See tables <1-1> and <1-3>. 2.2.1.4 Drums Setup Data bulk dump
(ESBL Part)
2.1.4.4 Multi Part Data parameter change
See tables <1-1> and <1-4>. 2.2.2 QS300 Native Bulk Dump
11110000 F0 Exclusive status
2.1.4.5 Drums Setup Data parameter change 01000011 43 YAMAHA ID
(ESBL Part) 0000nnnn 0n Device Number
See tables <1-1> and <1-5>. 01001101 4B QS300 Model ID
If a Drum Setup Reset parameter change message is received, 0bbbbbbb bbbbbbb ByteCount
77
DGC1B
0bbbbbbb bbbbbbb ByteCount a) Transmission

0aaaaaaa aaaaaaa Address High Transmitted.
0aaaaaaa aaaaaaa Address Mid b) Reception
0aaaaaaa aaaaaaa Address Low Once FE has been received. if no MIDI data is subsequently
0ddddddd dd Data received for longer than an interval of approximately
| | 300msec. the Disklavier will perform the same function as
| | when ALL SOUNDS OFF. ALL NOTES OFF, and RESET
0ccccccc ccccccc Checksum ALL CONTROLLERS messages are received, and will
11110111 F7 End of Exclusive then return to a status in which FE is not monitored.
2.2.2.1 QS300 User Normal Voice Data bulk damp 4.2 Timing Clock
(ESBL Part) a) Transmission
See tables <2-1> and <2-2>. This message is transmitted only when the REMOTE OUT
parameter is set to On.
3. SYSTEM COMMON MESSAGES
b) Reception
3.1 Song Position Pointer Not recognized.
a) Transmission
4.3 Start
This message is transmitted only when the REMOTE OUT
a) Transmission
parameter is set to On.
This message is transmitted only when the REMOTE OUT
b) Reception parameter is set to On.
This message is received only when REMOTE IN
b) Reception
Parameter is set to On.
This message is received only when REMOTE IN
3.2 Song Select Parameter is Set to On.
a) Transmission 4.4 Stop
This message is transmitted only when the REMOTE OUT a) Transmission
parameter is set to On. This message is transmitted only when the REMOTE OUT
b) Reception parameter is set to On.
This message is received only when REMOTE IN b) Reception
Parameter is set to On. This message is received only when REMOTE IN
4. SYSTEM REALTIME MESSAGES Parameter is Set to On.
4.1 Active Sensing
<Table 1-1>
Parameter Bass Address
Model ID = 4C [XG]
PegnahCretemara
Asserdd
(H) (M) (L) Description
XG SYSTEM 00 00 00 System
00 00 7D Drum setup Reset
00 00 7E XG System On
00 00 7F All Parameter Reset
EFFECT1 02 01 00 Effect1 (Reverb, Chorus, Variation)
MULTI PART 08 00 00 Multi Part 1
:
08 0F 00 Multi Part 16 -------> Address Parameter
DRUM 30 18 00 Drum Setup 1
3n 0B 00 note number 13
30 18 00 Drum Setup 2
3n 0C 00 note number 14
: :
3n 5B 00 note number 91
n: Drum setup number (0, 1)
<Table 1-2>
MIDI Parameter Change table (SYSTEM) [XG]
Address Size Data Parameter Description Default value
(H) (H) (H) (H)
00 00 00 4 0000-07FF MASTER TUNE -102.4 - +102.3 [cent] 00 04 00 00
1st bit3-0➝bit15-12 -400
2nd bit3-0➝bit11-8
3rd bit3-0➝bit7-4
4th bit3-0➝bit3-0
04 1 00 - 7F MASTER VOLUME 0 - 127 7F
05 1 00 - 7F not used
06 1 28 - 58 TRANSPOSE -24 - +24 [semitones] 40
7D n DRUM SETUP RESET n=Drum setup number
7E 00 XG SYSTEM ON 00=XG system ON (receive only)
7F 00 ALL PARAMETER RESET 00=ON (receive only)
TOTAL SIZE 07
78
DGC1B
<Table 1-3>
MIDI Parameter Change table (EFFECT 1) [XG]
(H) (H) (H) (H)
02 01 00 2 00-7F REVERB TYPE MSB see Effect Type List 01(=HALL1)
00-7F REVERB TYPE LSB 00 : basic type 00
02 1 00-7F REVERB PARAMETER 1 see Effect Parameter List Depends on reverb type
03 1 00-7F REVERB PARAMETER 2 ’’ ’’
0A 1 00-7F REVERB PARAMETER 9 ’’ ’’
0B 1 00-7F REVERB PARAMETER 10 ’’ ’’
0C 1 00-7F REVERB RETURN -∞ dB...0dB...+6dB(0...64...127) 40
0D 1 01-7F REVERB PAN L63...C...R63(1...64...127) 40
TOTAL SIZE 0E
02 01 10 1 00-7F REVERB PARAMETER 11 see Effect Parameter List Depends on reverb type
TOTAL SIZE 6
02 01 20 2 00-7F CHORUS TYPE MSB see Effect Type List 41 (=CHORUS1)
00-7F CHORUS TYPE LSB 00 : basic type 00
22 1 00-7F CHORUS PARAMETER 1 see Effect Parameter List Depends on chorus Type
23 1 00-7F CHORUS PARAMETER 2 ’’ ’’
2A 1 00-7F CHORUS PARAMETER 9 ’’ ’’
2B 1 00-7F CHORUS PARAMETER 10 ’’ ’’
2C 1 00-7F CHORUS RETURN -∞ dB...0dB...+6dB(0...64...127) 40
2D 1 01-7F CHORUS PAN L63...C...R63(1...64...127) 40
2E 1 00-7F SEND CHORUS TO REVERB -∞ dB...0dB... +6dB(0...64...127) 00
TOTAL SIZE 0F
02 01 30 1 00-7F CHORUS PARAMETER 11 see Effect Parameter List Depends on chorus Type
TOTAL SIZE 6
02 01 40 2 00-7F VARIATION TYPE MSB see Effect Type List 05 (=DELAY L, C, R)
00-7F VARIATION TYPE LSB 00 : basic type 00
42 2 00-7F VARIATION PARAMETER 1 MSB see Effect Parameter List Depends on variation type
00-7F VARIATION PARAMETER 1 LSB ’’ ’’
44 2 00-7F VARIATION PARAMETER 2 MSB ’’ ’’
4A 2 00-7F VARIATION PARAMETER 5 MSB ’’ ’’
4C 2 00-7F VARIATION PARAMETER 6 MSB ’’ ’’
4E 2 00-7F VARIATION PARAMETER 7 MSB ’’ ’’
56 1 00-7F VARIATION RETURN -∞ dB...0dB...+6dB(0...64...127) 40
57 1 01-7F VARIATION PAN L63...C...R63(1...64...127) 40
58 1 00-7F SEND VARIATION TO REVERB -∞ dB...0dB...+6dB(0...64...127) 00
59 1 00-7F SEND VARIATION TO CHORUS -∞ dB...0dB...+6dB(0...64...127) 00
5A 1 00-01 VARIATION CONNECTION 0:INSERTION, 1:SYSTEM 00
5B 1 00-0F,7F VARIATION PART Part1...16(0...15) 7F
0FF (127)
79
DGC1B
5C 1 00-7F MW VARIATION CONTROL DEPTH -64 - +63 40

5D 1 00-7F BEND VARIATION CONTROL DEPTH -64 - +63 40
5E 1 00-7F CAT VARIATION CONTROL DEPTH -64 - +63 40
5F 1 00-7F AC1 VARIATION CONTROL DEPTH -64 - +63 40
60 1 00-7F AC2 VARIATION CONTROL DEPTH -64 - +63 40
TOTAL SIZE 21
02 01 70 1 00-7F VARIATION PARAMETER 11 see Effect Parameter List Depends on variation type
71 1 00-7F VARIATION PARAMETER 12 ’’ ’’
TOTAL SIZE 6
<Table 1-4>
MIDI Parameter Change table (MULTI PART) [XG]
(H) (H) (H) (H)
08 nn 00 1 00 - 20 ELEMENT RESERVE 0 - 32 part10=0, other =2
nn 01 1 00 - 7F BANK SELECT MSB 0 - 127 part10=7F, other=0
nn 02 1 00 - 7F BANK SELECT LSB 0 - 127 00
nn 03 1 00 - 7F PROGRAM NUMBER 1 - 128 00
nn 04 1 00 - 0F, 7F Rcv CHANNEL 1 - 16,OFF part no.
nn 05 1 00 - 01 MONO/POLY MODE 0:MONO 01
1:POLY
nn 06 1 00 - 02 SAME NOTE NUMBER KEY ON ASSIGN 0:SINGLE 1 (all part)
1:MULTI part10=2, other=0
2:INST (for DRUM)
nn 07 1 00 - 03 PART MODE 0:NORMAL 00 (other than Part10)
1:DRUM 02 (Part10)
2-3:DRUMS1 - 2
nn 08 1 28 - 58 NOTE SHIFT -24 - +24 [semitones] 40
nn 09 2 00 - FF DETUNE -12.8 - +12.7 [Hz] 08 00
nn 0A 1st bit3-0➝bit7-4 (80)
2nd bit3-0➝bit3-0
nn 0B 1 00 - 7F VOLUME 0 - 127 64
nn 0C 1 00 - 7F VELOCITY SENSE DEPTH 0 - 127 40
nn 0D 1 00 - 7F VELOCITY SENSE OFFSET 0 - 127 40
nn 0E 1 00 - 7F PAN 0/random, 1/L63-64/C-127/R63 40
nn 0F 1 00 - 7F NOTE LIMIT LOW C-2 - G8 00
nn 10 1 00 - 7F NOTE LIMIT HIGH C-2 - G8 7F
nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F
nn 12 1 00 - 7F CHORUS SEND 0 - 127 00
nn 13 1 00 - 7F REVERB SEND 0 - 127 40
nn 14 1 00 - 7F VARIATION SEND 0 - 127 00
nn 15 1 00 - 7F VIBRATO RATE -64 - +63 40

nn 16 1 00 - 7F VIBRATO DEPTH -64 - +63 40 (drum part ignores)
nn 17 1 00 - 7F VIBRATO DELAY -64 - +63 40 (drum part ignores)
nn 18 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
nn 19 1 00 - 7F FILTER RESONANCE -64 - +63 40
nn 1A 1 00 - 7F EG ATTACK TIME -64 - +63 40
nn 1B 1 00 - 7F EG DECAY TIME -64 - +63 40
nn 1C 1 00 - 7F EG RELEASE TIME -61 - +63 40
nn 1D 1 28 - 58 MW PITCH CONTROL -24 -+24 [semitones] 40

nn 1E 1 00 - 7F MW FILTER CONTROL -9600 - +9450 [cent] 40
nn 1F 1 00 - 7F MW AMPLITUDE CONTROL -64 - +63 40
nn 20 1 00 - 7F MW LFO PMOD DEPTH 0 - 127 0A
nn 21 1 00 - 7F MW LFO FMOD DEPTH 0 - 127 00
nn 22 1 00 - 7F MW LFO AMOD DEPTH 0 - 127 00
nn 23 1 28 - 58 BEND PITCH CONTROL -24 - +24 [semitones] 42

nn 24 1 00 - 7F BEND FILTER CONTROL -9600 - +9450 [cent] 40
nn 25 1 00 - 7F BEND AMPLITUDE CONTROL -64 - +63 40
nn 26 1 00 - 7F BEND LFO PMOD DEPTH +100 - +100 [%] 40
nn 27 1 00 - 7F BEND LFO FMOD DEPTH +100 - +100 [%] 40
nn 28 1 00 - 7F BEND LFO AMOD DEPTH +100 - +100 [%] 40
TOTAL SIZE 29
nn 30 1 00 - 01 Rcv PITCH BEND 0/OFF, 1/ON 01
nn 31 1 00 - 01 Rcv CH AFTER TOUCH (CAT) 0/OFF, 1/ON 01
nn 32 1 00 - 01 Rcv PROGRAM CHANGE 0/OFF, 1/ON 01
nn 33 1 00 - 01 Rcv CONTROL CHANGE 0/OFF, 1/ON 01
nn 34 1 00 - 01 Rcv POLY AFTER TOUCH (PAT) 0/OFF, 1/ON 01
80
DGC1B
nn 35 1 00 - 01 Rcv NOTE MESSAGE 0/OFF, 1/ON 01

nn 36 1 00 - 01 Rcv RPN 0/OFF, 1/ON 01
nn 37 1 00 - 01 Rcv NRPN 0/OFF, 1/ON XG=01, GM=00
nn 38 1 00 - 01 Rcv MODULATION 0/OFF, 1/ON 01
nn 39 1 00 - 01 Rcv VOLUME 0/OFF, 1/ON 01
nn 3A 1 00 - 01 Rcv PAN 0/OFF, 1/ON 01
nn 3B 1 00 - 01 Rcv EXPRESSION 0/OFF, 1/ON 01
nn 3C 1 00 - 01 Rcv HOLD1 0/OFF, 1/ON 01
nn 3D 1 00 - 01 Rcv PORTAMENTO 0/OFF, 1/ON 01
nn 3E 1 00 - 01 Rcv SOSTENUTO 0/OFF, 1/ON 01
nn 3F 1 00 - 01 Rcv SOFT PEDAL 0/OFF, 1/ON 01
nn 40 1 00 - 01 Rcv BANK SELECT 0/OFF,1/ON XG=01, GM=00
nn 41 1 00 - 7F SCALE TUNING C -64 - +63 [cent] 40
nn 42 1 00 - 7F SCALE TUNING C# -64 - +63 [cent] 40
nn 43 1 00 - 7F SCALE TUNING D -64 - +63 [cent] 40
nn 44 1 00 - 7F SCALE TUNING D# -64 - +63 [cent] 40
nn 45 1 00 - 7F SCALE TUNING E -64 - +63 [cent] 40
nn 46 1 00 - 7F SCALE TUNING F -64 - +63 [cent] 40
nn 47 1 00 - 7F SCALE TUNING F# -64 - +63 [cent] 40
nn 48 1 00 - 7F SCALE TUNING G -64 - +63 [cent] 40
nn 49 1 00 - 7F SCALE TUNING G# -64 - +63 [cent] 40
nn 4A 1 00 - 7F SCALE TUNING A -64 - +63 [cent] 40
nn 4B 1 00 - 7F SCALE TUNING A# -64 - +63 [cent] 40
nn 4C 1 00 - 7F SCALE TUNING B -64 - +63 [cent] 40
nn 4D 1 28 - 58 CAT PITCH CONTROL -24 - +24 [semitones] 40
nn 4E 1 00 - 7F CAT FILTER CONTROL -9600 - +9450 [cent] 40
nn 4F 1 00 - 7F CAT AMPLITUDE CONTROL -64 - +63 40
nn 50 1 00 - 7F CAT LFO PMOD DEPTH 0 - 127 00
nn 51 1 00 - 7F CAT LFO FMOD DEPTH 0 - 127 00
nn 52 1 00 - 7F CAT LFO AMOD DEPTH 0 - 127 00
nn 53 1 28 - 58 PAT PITCH CONTROL -24 - +24 [semitones] 40
nn 54 1 00 - 7F PAT FILTER CONTROL -9600 - +9450 [cent] 40
nn 55 1 00 - 7F PAT AMPLITUDE CONTROL -64 - +63 40
nn 56 1 00 - 7F PAT LFO PMOD DEPTH 0 - 127 00
nn 57 1 00 - 7F PAT LFO FMOD DEPTH 0 - 127 00
nn 58 1 00 - 7F PAT LFO AMOD DEPTH 0 - 127 00
nn 59 1 00 - 5F AC1 CONTROLLER NUMBER 0 - 95 10
nn 5A 1 28 - 58 AC1 PITCH CONTROL -24 - +24 [semitones] 40
nn 5B 1 00 - 7F AC1 FILTER CONTROL -9600 - +9450 [cent] 40
nn 5C 1 00 - 7F AC1 AMPLITUDE CONTROL -64 - +63 40
nn 5D 1 00 - 7F AC1 LFO PMOD DEPTH 0 - 127 00
nn 5E 1 00 - 7F AC1 LFO FMOD DEPTH 0 - 127 00
nn 5F 1 00 - 7F AC1 LFO AMOD DEPTH 0 - 127 00
nn 60 1 00 - 5F AC2 CONTROLLER NUMBER 0 - 95 11
nn 61 1 28 - 58 AC2 PITCH CONTROL -24 - +24 [semitones] 40
nn 62 1 00 - 7F AC2 FILTER CONTROL -9600 - +9450 [cent] 40
nn 63 1 00 - 7F AC2 AMPLITUDE CONTROL -64 - +63 40
nn 64 1 00 - 7F AC2 LFO PMOD DEPTH 0 - 127 00
nn 65 1 00 - 7F AC2 LFO FMOD DEPTH 0 - 127 00
nn 66 1 00 - 7F AC2 LFO AMOD DEPTH 0 - 127 00
nn 67 1 00 - 01 PORTAMENTO SWITCH 0/OFF, 1/ON 00
nn 68 1 00 - 7F PORTAMENTO TIME 0 - 127 00
nn 69 1 00 - 7F PITCH EG INITIAL LEVEL -64 -+63 40
nn 6A 1 00 - 7F PITCH EG ATTACK TIME -64 - +63 40
nn 6B 1 00 - 7F PITCH EG RELEASE LEVEL -64 - +63 40
nn 6C 1 00 - 7F PITCH EG RELEASE TIME -64 - +63 40
nn 6D 1 01 - 7F VELOCITY LIMIT LOW 1 - 127 01
nn 6E 1 01 - 7F VELOCITY LIMIT HIGH 1 - 127 7F
TOTAL SIZE 3F
nn = Part Number (0:1Part, 1:2Part, 2:3Part, ..., 15:16Part)

For the DRUM PART, the following parameters have no effect.
• SOFT PEDAL • PITCH EG INITIAL LEVEL

• BANK SELECT LSB • PITCH EG ATTACK TIME
• MONO/POLY • PITCH EG RELEASE LEVEL
• SCALE TUNING • PITCH EF RELEASE TIME
• PORTAMENTO • POLY AFTER TOUCH
81
DGC1B
<Table 1-5>
MIDI Parameter Change table (DRUM SETUP) [XG]
Address Size Data Parameter Description Default
(H) (H) (H) (H)
3n rr 00 1 00 - 7F PITCH COARSE -64 - +63 40
3n rr 01 1 00 - 7F PITCH FINE -64 - +63 [cent] 40
3n rr 02 1 00 - 7F LEVEL 0 - 127 Depends on the note
3n rr 03 1 00 - 7F ALTERNATE GROUP 0/OFF, 1 - 127 ’’
3n rr 04 1 00 - 7F PAN 0/random, 1/L63 - 64/C - 127/R63 ’’
3n rr 05 1 00 - 7F REVERB SEND 0 - 127 ’’
3n rr 06 1 00 - 7F CHORUS SEND 0 - 127 ’’
3n rr 07 1 00 - 7F VARIATION SEND 0 - 127 7F
3n rr 08 1 00 - 01 KEY ASSIGN 0/SINGLE, 1/MULTI 00
3n rr 09 1 00 - 01 Rcv NOTE OFF 0/OFF, 1/ON Depends on the note
3n rr 0A 1 00 - 01 Rcv NOTE ON 0/OFF, 1/ON 01
3n rr 0B 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
3n rr 0C 1 00 - 7F FILTER RESONANCE -64 - +63 40
3n rr 0D 1 00 - 7F EG ATTACK RATE -64 - +63 40
3n rr 0E 1 00 - 7F EG DECAY1 RATE -64 - +63 40
3n rr 0F 1 00 - 7F EG DECAY2 RATE -64 - +63 40
TOTAL SIZE 10
[Note]
n: Drum number (0 - 1)
rr: note number (0D - 5B)
When XG system on or GM mode on messages are received, all Drum Setup parameters are initialized.
The Drum Setup Reset message can be used to initialized each Drum Setup parameter.
Selecting a Drum Set will cause the Drum Setup parameter values to be initialized.
<Table 2-1>
Parameter Bass Address
Model ID = 4B [QS300]
Bulk Dump
Address Description
(H) (M) (L)
USER 11 00 00 User Normal Voice 1
NORMAL :
VOICE 00 1F 00 User Normal Voice 32
<Table 2-2>
MIDI Bulk Dump table (USER NORMAL VOICE) [QS300]
Address Size Data Parameter Description Default
(H) (H) (H) (H)
[Common]
11 nn 00 17D 20-7E Voice Name
:
07
08 not used
: ”
0A ”
0B 01-03 Element Switch 1:Element 1 on, 2:Element 2 on, 3:Element 1 and 2 on
0C 00-7F Voice Level
0D not used
: ”
3C ”
[Element 1]
3D 00-7F Wave Number High bit13-bit7
3E 00-7F Wave Number Low bit6-bit0
3F 00-7F Note Limit Low
40 00-7F Note Limit High
41 00-7F Velocity Limit Low
42 00-7F Velocity Limit High
43 00-01 Filter EG Velocity Curve
44 00-02 LFO Wave Select 0:saw, 1:tri, 2:S&H
45 00-01 LFO Phase Initialize 0:OFF, 1:ON
46 00-3F LFO Speed
47 00-7F LFO Delay
48 00-7F LFO Fade Time
49 00-3F LFO PMD Depth
4A 00-0F LFO CMD Depth
4B 00-1F LFO AMD Depth
82
DGC1B
4C 20-60 Note Shift

4D 0E -72 Detune
4E 00-05 Pitch Scaling 0:100%, 1:50%, 2:20%, 3:10%, 4:5%, 5:0%
4F 00-7F Pitch Scaling Center Note
50 00-03 Pitch EG Depth 0:1/2oct, 1:1oct, 2:2oct, 3:4oct
51 39-47 Velocity PEG Level Sensitivity
52 39-47 Velocity PEG Rate Sensitivity
53 39-47 PEG Rate Scaling
54 00-7F PEG Rate Scaling Center Note
55 00-3F PEG Rate 1
56 00-3F PEG Rate 2
57 00-3F PEG Rate 3
58 00-3F PEG Rate 4
59 00-7F PEG Level 0
5A 00-7F PEG Level 1
5B 00-7F PEG Level 2
5C 00-7F PEG Level 3
5D 00-7F PEG Level 4
5E 00-3F Filter Resonance
5F 00-07 Velocity Sensitivity
60 00-7F Cutoff Frequency
61 00-7F Cutoff Scaling Break Point 1
65 00-7F Cutoff Scaling Offset 1
69 39-47 Velocity FEG Level Sensitivity
6A 39-47 Velocity FEG Rate Sensitivity
6B 39-47 FEG Rate Scaling
6C 00-7F FEG Rate Scaling Center Note
6D 00-3F FEG Rate 1
6E 00-3F FEG Rate 2
6F 00-3F FEG Rate 3
70 00-3F FEG Rate 4
71 00-7F FEG Level 0
76 00-7F Element Level
77 00-7F Level Scaling Break Point 1
7A 00-7F Level Scaling Break Point 4
7B 00-7F Level Scaling Offset 1
7C 00-7F Level Scaling Offset 2
7D 00-7F Level Scaling Offset 3
7E 00-7F Level Scaling Offset 4
7F 00-06 Velocity Curve
80 00-0F Pan 0 (Left)-14 (Right), 15:Scaling
81 39-47 AEG Rate Scaling
82 00-7F AEG Scaling Center Note
83 00-0F AEG Key on Delay
84 00-7F AEG Attack Rate
85 00-7F AEG Decay 1 Rate
86 00-7F AEG Decay 2 Rate
87 00-7F AEG Release Rate
88 00-7F AEG Decay 1 Level
89 00-7F AEG Decay 2 Level
8A 00-7F Address Offset High bit13-bit7
8B 00-7F Address Offset Low bit6-bit0
8C 39-47 Resonance Sensitivity
[Element 2]
8D same as [Element 1]
: ”
DC ”
[Element 3]
DD not used
: ”
12C ”
12D [Element 4]
: not used
17C ”
TOTAL SIZE 17D
nn=Voice Number (00-1F)
83
DGC1B
XG Normal Voice List

Bank Select MSB = 000, LSB = Bank Number
Voice names in bold typeface are voices that can be selected in the Disklavier.
The Disklavier can produce all the voices listed below, but can only display bank 0 voices.
Instrument Program Bank Ele- Instrument Program Bank Ele- Instrument Program Bank Ele- Instrument Program Bank Voice Name Ele-
Group # # Voice Name ment Group # # Voice Name ment Group # Voice Name ment Group # ment
# #
Piano 1 0 GrandPno 1 Organ 17 0 DrawOrgn 1 Bass 33 0 Aco.Bass 1 Ensemble 49 0 Strings1 1
1 GrndPnoK 1 32 DetDrwOr 2 40 JazzRthm 2 3 S.Strngs 2
18 MelloGrP 1 33 60sDrOr1 2 45 VXUprght 2 8 SlowStr 1
40 PianoStr 2 34 60sDrOr2 2 34 0 FngrBass 1 24 ArcoStr 2
41 Dream 2 35 70sDrOr1 2 18 FingrDrk 2 35 60sStrng 2
2 0 BritePno 1 36 DrawOrg2 2 27 FlangeBa 2 40 Orchestr 2
1 BritPnoK 1 37 60sDrOr3 2 40 Ba&DstEG 2 41 Orchstr2 2
3 0 E.Grand 2 38 EvenBar 2 43 FngrSlap 2 42 TremOrch 2
1 ElGrPnoK 2 40 16+2"2/3 2 45 FngBass2 2 45 VeloStr 2
32 Det.CP80 2 64 Organ Ba 1 65 ModAlem 2 50 0 Strings2 1
40 ElGrPno1 2 65 70sDrOr2 2 35 0 PickBass 1 3 S.SlwStr 2
41 ElGrPno2 2 66 CheezOrg 2 28 MutePkBa 1 8 LegatoSt 2
4 0 HnkyTonk 2 67 DrawOrg3 2 36 0 Fretless 1 40 Warm Str 2
1 HnkyTnkK 2 18 0 PercOrgn 1 32 Fretles2 2 41 Kingdom 2
5 0 E.Piano1 2 24 70sPcOr1 2 33 Fretles3 2 64 70s Str 1
1 El.Pno1K 1 32 DetPrcOr 2 34 Fretles4 2 65 Str Ens3 1
18 MelloEP1 2 33 LiteOrg 2 96 SynFretl 2 51 0 Syn.Str1 2
32 Chor.EP1 2 37 PercOrg2 2 97 Smooth 2 27 ResoStr 2
40 HardEl.P 2 19 0 RockOrgn 2 37 0 SlapBas1 1 64 Syn Str4 2
45 VX El.P1 2 64 RotaryOr 2 27 ResoSlap 1 65 SS Str 2
64 60sEl.P 1 65 SloRotar 2 32 PunchThm 2 52 0 Syn.Str2 2
6 0 E.Piano2 2 66 FstRotar 2 38 0 SlapBas2 1 53 0 ChoirAah 1
1 El.Pno2K 1 20 0 ChrchOrg 2 43 VeloSlap 2 3 S.Choir 2
32 Chor.EP2 2 32 ChurOrg3 2 39 0 SynBass1 1 16 Ch.Aahs2 2
33 DX Hard 2 35 ChurOrg2 2 18 SynBa1Dk 1 32 MelChoir 2
34 DXLegend 2 40 NotreDam 2 20 FastResB 1 40 ChoirStr 2
40 DX Phase 2 64 OrgFlute 2 24 AcidBass 1 54 0 VoiceOoh 1
41 DX+Analg 2 65 TrmOrgFl 2 35 Clv Bass 2 55 0 SynVoice 1
42 DXKotoEP 2 21 0 ReedOrgn 1 40 TeknoBa 2 40 SynVox2 2
45 VX El.P2 2 40 Puff Org 2 64 Oscar 2 41 Choral 2
7 0 Harpsi. 1 22 0 Acordion 2 65 SqrBass 1 64 AnaVoice 1
1 Harpsi.K 1 32 AccordIt 2 66 RubberBa 2 56 0 Orch.Hit 2
25 Harpsi.2 2 23 0 Harmnica 1 96 Hammer 2 35 OrchHit2 2
35 Harpsi.3 2 32 Harmo 2 2 40 0 SynBass2 2 64 Impact 2
8 0 Clavi. 2 24 0 TangoAcd 2 6 MelloSB1 1 Brass 57 0 Trumpet 1
1 Clavi. K 1 64 TngoAcd2 2 12 Seq Bass 2 16 Trumpet2 1
27 ClaviWah 2 Guitar 25 0 NylonGtr 1 18 ClkSynBa 2 17 BriteTrp 2
64 PulseClv 1 16 NylonGt2 1 19 SynBa2Dk 1 32 WarmTrp 2
65 PierceCl 2 25 NylonGt3 2 32 SmthBa 2 2 58 0 Trombone 1
Chromatic 9 0 Celesta 1 43 VelGtHrm 2 40 ModulrBa 2 18 Trmbone2 2
Percussion 10 0 Glocken 1 96 Ukulele 1 41 DX Bass 2 59 0 Tuba 1
11 0 MusicBox 2 26 0 SteelGtr 1 64 X WireBa 2 16 Tuba 2 1
64 Orgel 2 16 SteelGt2 1 Strings 41 0 Violin 1 60 0 Mute.Trp 1
12 0 Vibes 1 35 12StrGtr 2 8 SlowVln 1 61 0 Fr.Horn 2
1 VibesK 1 40 Nyln&Stl 2 42 0 Viola 1 6 FrHrSolo 2
45 HardVibe 2 41 Stl&Body 2 43 0 Cello 1 32 FrHorn2 1
13 0 Marimba 1 96 Mandolin 2 44 0 Contrabs 1 37 HornOrch 2
1 MarimbaK 1 27 0 Jazz Gtr 1 45 0 Trem.Str 1 62 0 BrasSect 1
64 SineMrmb 2 18 MelloGtr 1 8 SlowTrStr 1 35 Tp&TbSec 2
97 Balafon2 2 32 JazzAmp 2 40 Susp Str 2 40 BrssSec2 2
98 Log Drum 2 28 0 CleanGtr 1 46 0 Pizz.Str 1 41 HiBrass 2
14 0 Xylophon 1 32 ChorusGt 2 47 0 Harp 1 42 MelloBrs 2
15 0 TubulBel 1 29 0 Mute.Gtr 1 40 YangChin 2 63 0 SynBras1 2
96 ChrchBel 2 40 FunkGtr1 2 48 0 Timpani 1 12 QuackBr 2
97 Carillon 2 41 MuteStlG 2 20 RezSynBr 2
16 0 Dulcimer 1 43 FunkGtr2 2 24 PolyBrss 2
35 Dulcimr2 2 45 Jazz Man 1 27 SynBras3 2
96 Cimbalom 2 30 0 Ovrdrive 1 32 JumpBrss 2
97 Santur 2 43 Gt.Pinch 2 45 AnaVelBr 2
31 0 Dist.Gtr 1 64 AnaBrss1 2
40 FeedbkGt 2 64 0 SynBras2 1
41 FeedbGt2 2 18 Soft Brs 2
32 0 GtrHarmo 1 40 SynBras4 2
65 GtFeedbk 1 41 ChorBrss 2
66 GtrHrmo2 1 45 VelBras2 2
64 AnaBras2 2
Bank 0 : (GM) Bank 18 : Dark Bank 34 : Detune 3 Bank 43 : Velo-Switch Bank 71 : Other wave
Bank 1 : Key Scale Planning Bank 19 : Dark Bank 35 : Octave 1 Bank 45 : Velo-Xfade Bank 72 : Other wave
Bank 3 : Stereo Bank 20 : Resonant Bank 36 : Octave 2 Bank 64 : Other wave Bank 96 : Other wave
Bank 6 : Single Bank 24 : Attack Bank 37 : 5th 1 Bank 65 : Other wave Bank 97 : Other wave
Bank 8 : Slow Bank 24 : Release Bank 38 : 5th 2 Bank 66 : Other wave Bank 98 : Other wave
Bank 12 : Fast Decay Bank 27 : Reso Sweep Bank 39 : Bend Bank 67 : Other wave Bank 99 : Other wave
Bank 14 : Double Attack Bank 28 : Muted Bank 40 : Tutti Bank 68 : Other wave Bank 100 : Other wave
Bank 16 : Bright Bank 32 : Detune 1 Bank 41 : Tutti Bank 69 : Other wave Bank 101 : Other wave
Bank 17 : Bright Bank 33 : Detune 2 Bank 42 : Tutti Bank 70 : Other wave
84
DGC1B
Bank Select
MSB = 064, LSB = 000
SFX Voice
Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele- Program MSB=064 Ele- Program MSB=064 Ele-
Group # # ment Group # # ment Group # # ment # LSB=000 ment # LSB=000 ment
Reed 65 0 SprnoSax 1 Synth Pad 92 0 ChoirPad 2 Ethnic 105 0 Sitar 1 1 CuttngNz 1 65 Tel.Dial 1
66 0 Alto Sax 1 64 Heaven2 2 32 DetSitar 2 2 CttngNz2 2 66 DoorSqek 1
40 Sax Sect 2 66 Itopia 2 35 Sitar 2 2 3 67 Door Slam 1
43 HyprAlto 2 67 CC Pad 2 96 Tambra 2 4 Str Slap 1 68 Scratch 1
67 0 TenorSax 1 93 0 BowedPad 2 97 Tamboura 2 5 69 Scratch 2 2
40 BrthTnSx 2 64 Glacier 2 106 0 Banjo 1 6 70 WindChm 1
41 SoftTenr 2 65 GlassPad 2 28 MuteBnjo 1 7 71 Telphon2 1
64 TnrSax 2 1 94 0 MetalPad 2 96 Rabab 2 8 72
68 0 Bari.Sax 1 64 Tine Pad 2 97 Gopichnt 2 9 73
69 0 Oboe 2 65 Pan Pad 2 98 Oud 2 10 74
70 0 Eng.Horn 1 95 0 Halo Pad 2 107 0 Shamisen 1 11 75
71 0 Bassoon 1 96 0 SweepPad 2 108 0 Koto 1 12 76
72 0 Clarinet 1 20 Shwimmer 2 96 T. Koto 2 13 77
Pipe 73 0 Piccolo 1 27 Converge 2 97 Kanoon 2 14 78
74 0 Flute 1 64 PolarPad 2 109 0 Kalimba 1
15 79
75 0 Recorder 1 66 Celstial 2 110 0 Bagpipe 2
16 80
76 0 PanFlute 1 Synth 97 0 Rain 2 111 0 Fiddle 1
17 Fl.KClik 1 81 CarEngin 1
77 0 Bottle 2 Effects 45 ClaviPad 2 112 0 Shanai 1
18 82 Car Stop 1
78 0 Shakhchi 2 64 HrmoRain 2 64 Shanai2 1
19 83 Car Pass 1
79 0 Whistle 1 65 AfrcnWnd 2 96 Pungi 1
20 84 CarCrash 1
80 0 Ocarina 1 66 Caribean 2 97 Hichriki 2
21 85 Siren 2
Synth Lead 81 0 SquareLd 2 98 0 SoundTrk 2 Percussive 113 0 TnklBell 2
22 86 Train 1
6 Square 2 1 27 Prologue 2 96 Bonang 2
23 87 Jetplane 2
8 LMSquare 2 64 Ancestrl 2 97 Gender 2
24 88 Starship 2
18 Hollow 1 99 0 Crystal 2 98 Gamelan 2
25 89 Burst 2
19 Shmoog 2 12 SynDrCmp 2 99 S.Gamlan 2
64 Mellow 2 14 Popcorn 2 100 Rama Cym 2
26 90 Coaster 2
65 SoloSine 2 18 TinyBell 2 101 AsianBel 2 27 91 SbMarine 2
66 SineLead 1 35 RndGlock 2 114 0 Agogo 2 28 92
82 0 Saw.Lead 2 40 GlockChi 2 115 0 SteelDrm 2 29 93
6 Saw 2 1 41 ClearBel 2 97 GlasPerc 2 30 94
8 ThickSaw 2 42 ChorBell 2 98 ThaiBell 2 31 95
18 DynaSaw 1 64 SynMalet 1 116 0 WoodBlok 1 32 96
19 DigiSaw 2 65 SftCryst 2 96 Castanet 1 33 Rain 1 97 Laughing 1
20 Big Lead 2 66 LoudGlok 2 117 0 TaikoDrm 1 34 Thunder 1 98 Scream 1
24 HeavySyn 2 67 XmasBell 2 96 Gr.Cassa 1 35 Wind 1 99 Punch 1
25 WaspySyn 2 68 VibeBell 2 118 0 MelodTom 2 36 Stream 2 100 Heart 1
40 PulseSaw 2 69 DigiBell 2 64 Mel Tom2 1 37 Bubble 2 101 FootStep 1
41 Dr. Lead 2 70 AirBells 2 65 Real Tom 2 38 Feed 2 102
45 VeloLead 2 71 BellHarp 2 66 Rock Tom 2 39 103
96 Seq Ana 2 72 Gamelmba 2 119 0 Syn.Drum 1 40 104
83 0 CaliopLd 2 100 0 Atmosphr 2 64 Ana Tom 1 41 105
65 Pure Pad 2 18 WarmAtms 2 65 ElecPerc 2 42 106
84 0 Chiff Ld 2 19 HollwRls 2 120 0 RevCymbl 1 43 107
64 Rubby 2 40 NylonEP 2 Sound 121 0 FretNoiz 2 44 108
85 0 CharanLd 2 64 NylnHarp 2 Effects 122 0 BrthNoiz 2 45 109
64 DistLead 2 65 Harp Vox 2 123 0 Seashore 2 46 110
65 WireLead 2 66 AtmosPad 2 124 0 Tweet 2 47 111
86 0 Voice Ld 2 67 Planet 2 125 0 Telphone 1 48 112
24 SynthAah 2 101 0 Bright 2 126 0 Helicptr 1 49 Dog 1 113 MchinGun 1
64 VoxLead 2 64 FantaBel 2 127 0 Applause 1 50 Horse 1 114 LaserGun 2
87 0 Fifth Ld 2 96 Smokey 2 128 0 Gunshot 1 51 Bird 2 1 115 Xplosion 2
35 Big Five 2 102 0 Goblins 2 52 116 FireWork 2
88 0 Bass &Ld 2 64 GobSyn 2 53 117
16 Big&Low 2 65 50sSciFi 2
54 118
64 Fat&Prky 2 66 Ring Pad 2
55 Ghost 2 119
65 SoftWurl 2 67 Ritual 2
56 Maou 2 120
Synth Pad 89 0 NewAgePd 2 68 ToHeaven 2
57 121
64 Fantasy2 2 70 Night 2
58 122
90 0 Warm Pad 2 71 Glisten 2
59 123
16 ThickPad 2 96 BelChoir 2
60 124
17 Soft Pad 2 103 0 Echoes 2
61 125
18 SinePad 2 8 EchoPad2 2
62 126
64 Horn Pad 2 14 Echo Pan 2
63 127
65 RotarStr 2 64 EchoBell 2
64 128
91 0 PolySyPd 2 65 Big Pan 2
64 PolyPd80 2 66 SynPiano 2
65 ClickPad 2 67 Creation 2
: No Sound
66 Ana Pad 2 68 Stardust 2
67 SquarPad 2 69 Reso Pan 2
104 0 Sci-Fi 2
64 Starz 2
85
DGC1B
TG300B Normal Voice List

Bank Select MSB = Bank Number, LSB = ooo
Instrument Program Bank Ele- Instrument Program Bank Ele- Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele-
Group # # Voice Name ment Group # Voice Name ment Group # ment Group # ment
# # #
Piano 1 0 GrandPno 1 Organ 17 0 DrawOrgn 1 Guitar 29 0 Mute.Gtr 1 Strings 41 0 Violin 1
8 GrndPnoK 1 1 70sDrOr1 2 8 FunkGtr1 2 8 SlowVln 1
16 MelloGrP 1 8 DetDrwOr 2 16 FunkGtr2 2 126 E-Organ4 2
126 A-Piano1 2 9 70sDrOr2 2 126 A-Bass 2 127 synecho1 2
127 a.piano1 1 16 60sDrOr1 2 127 synbass1 1 42 0 Viola 1
2 0 BritePno 1 17 60sDrOr2 2 30 0 Ovrdrive 1 126 E-Organ5 2
8 BritPnoK 1 18 60sDrOr3 2 126 Choir-1 1 127 rain 2
126 A-Piano2 2 24 CheezOrg 2 127 synbass2 1 43 0 Cello 1
127 a.piano2 1 32 DrawOrg2 2 31 0 Dist.Gtr 1 126 E-Organ6 2
3 0 E.Grand 2 33 EvenBar 2 8 FeedbkGt 2 127 synoboe 2
1 ElGrPno1 2 40 Organ Ba 1 9 FeedbGt2 2 44 0 Contrabs 1
2 ElGrPno2 2 126 Slap-2 2 126 Choir-2 1 126 E-Organ7 2
8 ElGrPnoK 2 127 harpsi1 1 127 synbass3 2 127 synecho2 2
126 A-Piano3 2 18 0 PercOrgn 1 32 0 GtrHarmo 1 45 0 Trem.Str 1
127 a.piano3 1 1 70sPcOr1 2 8 GtFeedbk 1 8 SlowTrStr 1
4 0 HnkyTonk 2 8 DetPrcOr 2 126 Choir-3 2 9 Susp Str 2
8 HnkyTnkK 2 32 PercOrg2 2 127 synbass4 1 126 E-Organ8 2
126 A-Piano4 2 126 Slap-3 2 Bass 33 0 Aco.Bass 1 127 synsolo 2
127 e.piano1 1 127 harpsi2 2 126 Choir-4 2 46 0 Pizz.Str 1
5 0 E.Piano1 2 19 0 RockOrgn 2 127 newagepd 2 126 E-Organ9 2
8 Chor.EP1 2 8 RotaryOr 2 34 0 FngrBass 1 127 synrdorg 2
16 VX El.P1 2 16 SloRotar 2 1 FngBass2 2 47 0 Harp 1
24 60sEl.P 1 24 FstRotar 2 126 Strngs-1 2 126 SoftTP-1 1
25 HardEl.P 2 126 Slap-4 2 127 synharmo 2 127 synbell 1
26 MelloEP1 2 127 harpsi3 1 35 0 PickBass 1 48 0 Timpani 1
32 El.Pno1K 1 20 0 ChrchOrg 2 8 MutePkBa 1 126 SoftTP-2 1
126 A-Piano5 1 8 ChurOrg2 2 126 Strngs-2 2 127 squareld 2
127 e.piano2 1 16 ChurOrg3 2 127 choir pd 2 Ensemble 49 0 Strings1 1
6 0 E.Piano2 2 24 OrgFlute 2 36 0 Fretless 1 1 Slow Str 1
8 Chor.EP2 2 32 TrmOrgFl 2 1 Fretles2 2 8 Orchestr 2
16 VX El.P2 2 126 Slap-5 2 2 Fretles3 2 9 Orchstr2 2
24 DX Hard 2 127 clavi1 1 3 Fretles4 2 10 TremOrch 2
32 El.Pno2K 1 21 0 ReedOrgn 1 4 SynFretl 2 11 ChoirStr 2
126 A-Piano6 1 126 Slap-6 2 5 Smooth 2 16 S.Strngs 2
127 e.piano3 1 127 clavi2 1 126 Strngs-3 2 24 VeloStr 2
7 0 Harpsi. 1 22 0 Acordion 2 127 bowed pd 2 126 TP/TRB-1 1
8 Harpsi.3 2 8 AccordIt 2 37 0 SlapBas1 1 127 strsect1 2
16 Harpsi.K 1 126 Slap-7 2 8 ResoSlap 1 50 0 Strings2 1
24 Harpsi.2 2 127 clavi3 1 126 Strngs-4 2 1 70s Str 1
126 A-Piano7 1 23 0 Harmnica 1 127 soundtrk 2 8 LegatoSt 2
127 e.piano4 1 1 Harmo 2 2 38 0 SlapBas2 1 9 Warm Str 2
8 0 Clavi. 2 126 Slap-8 2 126 E-Organ1 2 10 S.SlwStr 2
8 Clavi. K 1 127 celesta1 1 127 atmosphr 2 126 TP/TRB-2 1
126 E-Piano1 2 24 0 TangoAcd 2 39 0 SynBass1 1 127 strsect2 2
127 hnkytnk 2 126 Finger-1 1 1 SynBa1Dk 1 51 0 Syn.Str1 2
Chromatic 9 0 Celesta 1 127 celesta2 1 8 AcidBass 1 1 Syn Str4 2
Percussion 126 E-Piano2 2 Guitar 25 0 NylonGtr 1 9 FastResB 1 126 TP/TRB-3 1
127 e.organ1 2 8 Ukulele 1 10 TeknoBa 2 127 strsect3 2
10 0 Glocken 1 16 NylonGt3 2 16 ResoBass 1 52 0 Syn.Str2 2
126 E-Piano3 2 24 VelGtHrm 2 126 E-Organ2 2 126 TP/TRB-4 1
127 e.organ2 2 32 NylonGt2 1 127 syn warm 2 127 pizz.str 1
11 0 MusicBox 2 40 LequintG 1 40 0 SynBass2 2 53 0 ChoirAah 1
126 A-Guitr1 1 126 Finger-2 2 1 ClkSynBa 2 8 S.Choir 2
127 e.organ3 1 127 synbras1 2 2 ModulrBa 2 9 MelChoir 2
12 0 Vibes 1 26 0 SteelGtr 1 3 Seq Bass 2 32 Ch.Aahs2 2
1 HardVibe 2 8 12StrGtr 2 8 DX Bass 2 126 TP/TRB-5 2
8 VibesK 1 9 Nyln&Stl 2 9 X WireBa 2 127 violin 1 2
126 A-Guitr2 2 16 Mandolin 2 16 RubberBa 2 54 0 VoiceOoh 1
127 e.organ4 1 32 SteelGt2 1 17 SynBa2Dk 1 126 TP/TRB-6 2
13 0 Marimba 1 126 Picked-1 1 18 MelloSB1 1 127 violin 2 1
8 MarimbaK 1 127 synbras2 2 19 SmthBa 2 2 55 0 SynVoice 1
17 Balafon2 2 27 0 Jazz Gtr 1 126 E-Organ3 2 8 SynVox2 2
24 Log Drum 2 1 MelloGtr 1 127 synfunny 1 126 Sax-1 1
126 A-Guitr3 2 8 PdlSteel 1 127 cello 1 1
127 pipeorg1 2 126 Picked-2 2 56 0 Orch.Hit 2
14 0 Xylophon 1 127 synbras3 2 1 OrchHit2 2
126 E-Guitr1 2 28 0 CleanGtr 1 8 Impact 2
127 pipeorg2 2 8 ChorusGt 2 16 LoFiRave 2
15 0 TubulBel 1 126 FretlsBs 1 126 Sax-2 1
8 ChrchBel 2 127 synbras4 2 127 cello 2 1
9 Carillon 2
126 E-Guitr2 1
127 pipeorg3 2
16 0 Dulcimer 1
1 Dulcimr2 2
8 Cimbalom 2
126 Slap-1 2
127 acordion 2
86
DGC1B
Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele- Instrument Program Bank Voice Name Ele-
Group # # ment Group # # ment Group # # ment Group # # ment
Brass 57 0 Trumpet 1 Synth Lead 81 0 SquareLd 2 Synth 97 0 Rain 2 Percussive 113 0 TnklBell 2
1 Trumpet2 1 1 Square 2 1 Effects 1 HrmoRain 2 8 Bonang 2
24 BriteTrp 2 2 Hollow 1 2 AfrcnWnd 2 9 Gender 2
25 WarmTrp 2 3 Mellow 2 8 ClaviPad 2 10 Gamelan 2
126 Sax-3 1 4 SoloSine 2 127 brssect2 2 11 S.Gamlan 2
127 contrabs 1 5 Shmoog 2 98 0 SoundTrk 2 16 Rama Cym 2
58 0 Trombone 1 6 LMSquare 2 1 Ancestrl 2 127 timpani 1
1 Trmbone2 2 8 SineLead 1 2 Prologue 2 114 0 Agogo 2
126 Sax-4 2 127 sax3 1 127 vibe1 1 127 melotom 1
127 harp 1 1 82 0 Saw.Lead 2 99 0 Crystal 2 115 0 SteelDrm 2
59 0 Tuba 1 1 Saw 2 1 1 SynMalet 1 127 deepsnar 1
1 Tuba 2 1 2 PulseSaw 2 2 SftCryst 2 116 0 WoodBlok 1
126 Brass-1 1 3 ThickSaw 2 3 RndGlock 2 8 Castanet 1
127 harp 2 1 4 Big Lead 2 4 LoudGlok 2 127 e.perc1 1
60 0 Mute.Trp 1 5 VeloLead 2 5 GlockChi 2 117 0 TaikoDrm 1
126 Brass-2 1 6 HeavySyn 2 6 ClearBel 2 8 Gr.Cassa 1
127 guitar 1 1 7 DynaSaw 1 7 XmasBell 2 127 e.perc2 1
61 0 Fr.Horn 2 8 Dr. Lead 2 8 VibeBell 2 118 0 MelodTom 2
1 FrHorn2 2 16 WaspySyn 2 9 DigiBell 2 1 Real Tom 2
8 FrHrSolo 1 127 sax4 1 16 ChorBell 2 8 Mel Tom2 1
16 HornOrch 2 83 0 CaliopLd 2 17 AirBells 2 9 Rock Tom 2
126 Brass-3 2 2 Pure Pad 2 18 BellHarp 2 127 taiko 1
127 guitar 2 1 127 clarint1 1 19 Gamelmba 2 119 0 Syn.Drum 1
62 0 BrasSect 1 84 0 Chiff Ld 2 127 vibe2 1 8 Ana Tom 1
8 BrssSec2 2 127 clarint2 1 100 0 Atmosphr 2 9 ElecPerc 2
126 Brass-4 2 85 0 CharanLd 2 1 WarmAtms 2 127 taikorim 1
127 elecgtr1 2 8 DistLead 2 2 NylnHarp 2 120 0 RevCymbl 1
63 0 SynBras1 2 127 oboe 1 3 Harp Vox 2 127 cymbal 2
1 PolyBrss 2 86 0 Voice Ld 2 4 HollwRls 2 Sound 121 0 FretNoiz 2
8 SynBras3 2 127 eng.horn 1 5 NylonEP 2 Effects 1 CuttngNz 1
9 QuackBr 2 87 0 Fifth Ld 2 6 AtmosPad 2 2 Str Slap 1
16 AnaBrss1 2 1 Big Five 2 127 symallet 1 3 CttngNz2 2
126 Brass-5 2 127 bassoon 1 101 0 Bright 2 127 castanet 1
127 elecgtr2 2 88 0 Bass &Ld 2 127 maletwin 2 122 0 BrthNoiz 2
64 0 SynBras2 1 1 Big&Low 2 102 0 Goblins 2 1 Fl.KClik 1
1 Soft Brs 2 2 Fat&Prky 2 1 GobSyn 2 127 triangle 1
8 SynBras4 2 127 harmnica 1 2 50sSciFi 2 123 0 Seashore 2
16 AnaBrss2 2 Synth Pad 89 0 NewAgePd 2 127 glocken 2 1 Rain 1
17 VelBras2 2 1 Fantasy2 2 103 0 Echoes 2 2 Thunder 1
126 Orch-Hit 1 127 trumpet1 1 1 EchoBell 2 3 Wind 1
127 sitar 1 90 0 Warm Pad 2 2 Echo Pan 2 4 Stream 2
Reed 65 0 SprnoSax 1 1 ThickPad 2 3 EchoPad2 2 5 Bubble 2
127 a.bass 1 1 2 Horn Pad 2 4 Big Pan 2 127 orchehit 1
66 0 Alto Sax 1 3 RotarStr 2 6 SynPiano 2 124 0 Tweet 2
8 HyprAlto 2 4 Soft Pad 2 127 tubulbel 1 1 Dog 1
127 a.bass 2 1 127 trumpet2 1 104 0 Sci-Fi 2 2 Horse 1
67 0 TnrSax 2 1 91 0 PolySyPd 2 1 Starz 2 3 Bird 2 1
8 BrthTnSx 2 1 PolyPd80 2 127 xylophon 1 127 telphone 1
127 e.bass 1 1 127 trmbone1 2 Ethnic 105 0 Sitar 1 125 0 Telphone 1
68 0 Bari.Sax 1 92 0 ChoirPad 2 1 Sitar 2 2 1 Tel.Dial 1
127 e.bass 2 1 1 Heaven2 2 2 DetSitar 2 2 DoorSqek 1
69 0 Oboe 2 127 trmbone2 2 8 Tambra 2 3 DoorSlam 1
127 slapbas1 1 93 0 BowedPad 2 16 Tamboura 2 4 Scratch 1
70 0 Eng.Horn 1 127 fr.horn1 1 127 marimba 2 5 WindChm 1
127 slapbas2 1 94 0 MetalPad 2 106 0 Banjo 1 6 Scratch2 2
71 0 Bassoon 1 1 Tine Pad 2 1 MuteBnjo 1 127 bird 1
127 fretles1 1 2 Pan Pad 2 8 Rabab 2 126 0 Helicptr 1
72 0 Clarinet 1 127 fr.horn2 2 16 Gopichnt 2 1 CarEngin 1
127 fretles2 1 95 0 Halo Pad 2 24 Oud 2 2 Car Stop 1
Pipe 73 0 Piccolo 1 127 tuba 2 127 koto 1 3 Car Pass 1
127 flute1 1 96 0 SweepPad 2 107 0 Shamisen 1 4 CarCrash 1
74 0 Flute 1 1 PolarPad 2 127 sho 2 5 Siren 2
127 flute2 1 8 Converge 2 108 0 Koto 1 6 Train 1
75 0 Recorder 1 9 Shwimmer 2 8 T. Koto 2 7 Jetplane 2
127 piccolo1 1 10 Celstial 2 16 Kanoon 2 8 Starship 2
76 0 PanFlute 1 127 brssect1 1 127 shakhchi 2 9 Burst 2
127 piccolo2 2 109 0 Kalimba 1 16 Coaster 2
77 0 Bottle 2 127 whistle1 2 127 jam 1
127 recorder 1 110 0 Bagpipe 2 127 0 Applause 1
78 0 Shakhchi 2 127 whistle2 1 1 Laughing 1
127 panpipes 2 111 0 Fiddle 1 2 Scream 1
79 0 Whistle 1 127 bottle 2 3 Punch 1
127 sax1 2 112 0 Shanai 1 4 Heart 1
80 0 Ocarina 1 1 Shanai2 1 5 FootStep 1
127 sax2 1 8 Pungi 1 127 efctwatr 2
16 Hichriki 2 128 0 Gunshot 1
127 breath 2 1 MchinGun 1
2 LaserGun 2
3 Xplosion 2
127 efctjngl 2
87
DGC1B
XG Drum Voice List

Bank Select MSB = Bank Number, LSB = 000
Drum kit names in bold typeface are those that can be selected in the Disklavier.
Bank 127 127 127 127 127 127 127 127 127 126 126
Program # 1 2 9 17 25 26 33 41 49 1 2
Note# Note Key Alternate Standard Kit Standard2 Kit Room Kit Rock Kit Electro Kit Analog Kit Jazz Kit Brush Kit Classic Kit SFX 1 SFX 2
off assign
13 C# -1 3 Surdo Mute
14 D -1 3 Surdo Open
15 D# -1 Hi Q
16 E -1 Whip Slap
17 F -1 4 Scratch Push
18 F# -1 4 Scratch Pull
19 G -1 Finger Snap
20 G# -1 Click Noise
21 A -1 Metronome Click
22 A# -1 Metronome Bell
23 B -1 Seq Click L
24 C 0 Seq Click H
25 C# 0 Brush Tap
26 D 0 O Brush Swirl L
27 D# 0 Brush Slap
28 E 0 O Brush Swirl H Reverse Cymbal Reverse Cymbal
29 F 0 O Snare Roll Snare Roll 2
30 F# 0 Castanet Hi Q Hi Q
31 G 0 Snare L Snare L 2 SD Rock M Snare M SD Rock H Brush Slap L
32 G# 0 Sticks
33 A 0 Bass Drum L Bass Drum M Bass Drum H 4 Bass Drum M Bass Drum L2
34 A# 0 Open Rim Shot Open Rim Shot 2
35 B 0 Bass Drum M Bass Drum M 2 Bass Drum H 3 BD Rock BD Analog L Gran Cassa
36 C 1 Bass Drum H Bass Drum H 2 BD Rock BD Gate BD Analog H BD Jazz BD Soft Gran Cassa Mute Guitar Cutting Noise Dial Tone
37 C# 1 Side Stick Analog Side Stick Guitar Cutting Noise 2 Door Creaking
38 D 1 Snare M Snare M 2 SD Room L SD Rock SD Rock L Analog Snare L Brush Slap M Marching Sn M Door Slam
39 D# 1 Hand Clap String Slap Scratch
40 E 1 Snare H Snare H 2 SD Room H SD Rock Rim SD Rock H Analog Snare H Brush Tap H Marching Sn H Scratch 2
41 F 1 Floor Tom L Room Tom 1 Rock Tom 1 E Tom 1 Analog Tom 1 Jazz Tom 1 Brush Tom 1 Jazz Tom 1 Windchime
42 F# 1 1 Hi-Hat Closed Analog HH Closed 1 Telephone Ring2
43 G 1 Floor Tom H Room Tom 2 Rock Tom 2 E Tom 2 Analog Tom 2 Jazz Tom 2 Brush Tom 2 Jazz Tom 2
44 G# 1 1 Hi-Hat Pedal Analog HH Closed 2
45 A 1 Low Tom Room Tom 3 Rock Tom 3 E Tom 3 Analog Tom 3 Jazz Tom 3 Brush Tom 3 Jazz Tom 3
46 A# 1 1 Hi-Hat Open Analog HH Open
47 B 1 Mid Tom L Room Tom 4 Rock Tom 4 E Tom 4 Analog Tom 4 Jazz Tom 4 Brush Tom 4 Jazz Tom 4
48 C 2 Mid Tom H Room Tom 5 Rock Tom 5 E Tom 5 Analog Tom 5 Jazz Tom 5 Brush Tom 5 Jazz Tom 5
49 C# 2 Crash Cymbal 1 Analog Cymbal Hand Cym.Open L
50 D 2 High Tom Room Tom 6 Rock Tom 6 E Tom 6 Analog Tom 6 Jazz Tom 6 Brush Tom 6 Jazz Tom 6
51 D# 2 Ride Cymbal 1 Hand Cym.Closed L
52 E 2 Chinese Cymbal FL.Key Click Engine Start
53 F 2 Ride Cymbal Cup Tire Screech
54 F# 2 Tambourine Car Passing
55 G 2 Splash Cymbal Crash
56 G# 2 Cowbell Analog Cowbell Siren
57 A 2 Crash Cymbal 2 Hand Cym.Open H Train
58 A# 2 Vibraslap Jetplane
59 B 2 Ride Cymbal 2 Hand Cym.Closed H Starship
60 C 3 Bongo H Burst Noise
61 C# 3 Bongo L Coaster
62 D 3 Conga H Mute Analog Conga H SbMarine
63 D# 3 Conga H Open Analog Conga M
64 E 3 Conga L Analog Conga L
65 F 3 Timbale H
66 F# 3 Timbale L
67 G 3 Agogo H
68 G# 3 Agogo L Rain Laughing
69 A 3 Cabasa Thunder Screaming
70 A# 3 Maracas Analog Maracas Wind Punch
71 B 3 O Samba Whistle H Stream Heartbeat
72 C 4 O Samba Whistle L Bubble Footsteps
73 C# 4 Guiro Short Feed
74 D 4 O Guiro Long
75 D# 4 Claves Analog Claves
76 E 4 Wood Block H
77 F 4 Wood Block L
78 F# 4 Cuica Mute Scratch Push Scratch Push
79 G 4 Cuica Open Scratch Pull Scratch Pull
80 G# 4 2 Triangle Mute
81 A 4 2 Triangle Open
82 A# 4 Shaker
83 B 4 Jingle Bell
84 C 5 Bell Tree Dog Machine Gun
85 C# 5 Horse Gallop Laser Gun
86 D 5 Bird 2 Explosion
87 D# 5 FireWork
88 E 5
89 F 5
90 F# 5 Ghost
91 G 5 Maou
: Same as Standard kit

: No sound
88
DGC1B
TG300B Drum Voice List

Program # 1 9 17 25 26 33 41 49 57 128
Note# Note Alternate Standard Kit Room Kit Power Kit Electro Kit Analog Kit Jazz Kit Brush Kit Orchestra Kit SFX Set C/M Kit
assign
25 C# 0 Snare Roll
26 D 0 Finger Snap
27 D# 0 Hi Q Hi-Hat Closed
28 E 0 Whip Slap Hi-Hat Pedal
29 F 0 7 Scratch Push Hi-Hat Open
30 F# 0 7 Scratch Pull Ride Cymbal 1
31 G 0 Sticks
32 G# 0 Click Noise
33 A 0 Metronome Click
34 A# 0 Metronome Bell
35 B 0 Bass Drum M BD Jazz
36 C 1 Bass Drum H BD Power BD Electronic BD Analog H BD Jazz BD Soft Gran Cassa
37 C# 1 Side Stick Analog Side Stick
38 D 1 Snare M SD Power SD Electronic Analog Snare L Brush Tap Concert SD
39 D# 1 Hand Clap Brush Slap Castanet High-Q
40 E 1 Snare H SD Power Brush Swirl Concert SD Slap SD Electro
41 F 1 Floor Tom L Room Tom 1 Room Tom 1 E Tom 1 Analog Tom 1 Jazz Tom 1 Jazz Tom 1 Timpani F Scratch Push
42 F# 1 1 Hi-Hat Closed Analog HH Closed 1 Timpani F# Scratch Pull
43 G 1 Floor Tom H Room Tom 2 Room Tom 2 E Tom 2 Analog Tom 2 Jazz Tom 2 Jazz Tom 2 Timpani G Sticks
44 G# 1 1 Hi-Hat Pedal Analog HH Closed 2 Timpani G# Square Click Hi-Hat Open 1
45 A 1 Low Tom Room Tom 3 Room Tom 3 E Tom 3 Analog Tom 3 Jazz Tom 3 Jazz Tom 3 Timpani A Metronome Click
46 A# 1 1 Hi-Hat Open Analog HH Open Timpani A# Metronome Bell Hi-Hat Open 2
47 B 1 Mid Tom L Room Tom 4 Room Tom 4 E Tom 4 Analog Tom 4 Jazz Tom 4 Jazz Tom 4 Timpani B Guitar Fret Noise
48 C 2 Mid Tom H Room Tom 5 Room Tom 5 E Tom 5 Analog Tom 5 Jazz Tom 5 Jazz Tom 5 Timpani C Guitar Cutting Down
49 C# 2 Crash Cymbal 1 Analog Cymbal Timpani C# Guitar Cutting Up
50 D 2 High Tom Room Tom 6 Room Tom 6 E Tom 6 Analog Tom 6 Jazz Tom 6 Jazz Tom 6 Timpani D Ac Bass Slap
51 D# 2 Ride Cymbal 1 Timpani D# FL.Key Click
52 E 2 Chinese Cymbal Reverse Cymbal Timpani E Laughing
53 F 2 Ride Cymbal Cup Timpani F Screaming
54 F# 2 Tambourine Punch
55 G 2 Splash Cymbal Heartbeat
56 G# 2 Cowbell Analog Cowbell Footsteps 1
57 A 2 Crash Cymbal 2 Hand Cym.1 Footsteps 2
58 A# 2 Vibraslap Applause
59 B 2 Ride Cymbal 2 Hand Cym.2 Door Creaking
60 C 3 Bongo H Door Slam
61 C# 3 Bongo L Scratch
62 D 3 Conga H Mute Analog Conga H Windchime
63 D# 3 Conga H Open Analog Conga M Engine Start
64 E 3 Conga L Analog Conga L Tire Screech
65 F 3 Timbale H Car Passing
66 F# 3 Timbale L Crash
67 G 3 Agogo H Siren
68 G# 3 Agogo L Train
69 A 3 Cabasa Jetplane
70 A# 3 Maracas Analog Maracas Helicopter
71 B 3 2 Samba Whistle H Starship
72 C 4 2 Samba Whistle L Gunshot
73 C# 4 3 Guiro Short Machine Gun Vibraslap
74 D 4 3 Guiro Long Laser Gun
75 D# 4 Claves Analog Claves Explosion
76 E 4 Wood Block H Dog Laughing
77 F 4 Wood Block L Horse Gallop Screaming
78 F# 4 4 Cuica Mute Bird Tweet Punch
79 G 4 4 Cuica Open Rain Heartbeat
80 G# 4 5 Triangle Mute Thunder Footsteps 1
81 A 4 5 Triangle Open Wind Footsteps 2
82 A# 4 Shaker Seashore Applause
83 B 4 Jingle Bell Stream Door Creaking
84 C 5 Bell Tree Bubble Door Slam
85 C# 5 Castanet Scratch
86 D 5 6 Surdo Mute Windchime
87 D# 5 6 Surdo Open Engine Start
88 E 5 Applause Tire Screech
89 F 5 Car Passing
90 F# 5 Crash
91 G 5 Siren
92 G# 5 Train
93 A 5 Jetplain
94 A# 5 Helicopter
95 B 5 Starship
96 C 6 Gunshot
97 C# 6 Machine Gun
98 D 6 Laser Gun
99 D# 6 Explosion
100 E 6 Dog
101 F 6 Horse Gallop
102 F# 6 Bird Tweet
103 G 6 Rain
104 G# 6 Thunder
105 A 6 Wind
106 A# 6 Seashore
107 B 6 Stream
108 C 7 Bubble
: Same as Standard kit : No sound

89
DGC1B
Effect Type List
Exclusive Effect Type Description
MSB LSB
REVERB
00 00 NO EFFECT Effect turned off.
01 00 HALL1 Reverb simulating the resonance of a hall.
02 00 ROOM1 Reverb simulating the resonance of a room.
03 00 STAGE1 Reverb appropriate for a solo instrument.
04 00 PLATE Reverb simulating a metal plate reverb unit.
10 00 WHITE ROOM A unique short reverb with a bit of initial delay.
11 00 TUNNEL Simulation of a tunnel space expanding to left and right.
13 00 BASEMENT A bit of initial delay followed by reverb with a unique resonance.
CHORUS
41 00 CHORUS1 Conventional chorus program that adds natural spaciousness.
41 08 CHORUS4 Chorus with stereo input. The pan setting specified for the Part will also apply to the effect sound.
42 00 CELESTE1 A 3-phase LFO adds modulation and spaciousness to the sound.
42 08 CELESTE4 Celeste with stereo input. The pan setting specified for the Part will also apply to the effect sound.
43 00 FLANGER1 Adds a jet-airplane effect to the sound.
VARIATION
04 00 PLATE Reverb simulating a metal plate reverb unit.
05 00 DELAY L, C, R A program that creates three delay sounds; L, R, and C (center).
06 00 DELAY L, R A program that creates two delay sounds; L and R. Two feedback delays are provided.
07 00 ECHO Two delays (L and R) and independent feedback delays for L and R.
08 00 CROSS DELAY A program that crosses the feedback of two delays.
09 00 EARLY REF1 An effect that produces only the early reflection component of reverb.
09 01 EARLY REF2 An effect that produces only the early reflection component of reverb.
0A 00 GATE REVERB A simulation of gated reverb.
0B 00 REVERSE GATE A program that simulates gated reverb played backwards.
14 00 KARAOKE 1 A delay with feedback of the same types as used for karaoke reverb.
41 00 CHORUS1 Conventional chorus program that add natural spaciousness.
41 08 CHORUS4 Chorus with stereo input.
42 08 CELESTE4 Celeste with stereo input.
44 00 SYMPHONIC A multi-phase version of CELESTE.
45 00 ROTARY SPEAKER A simulation of a rotary speaker. You can use AC1 (assignable controller) etc. to control the speed of rotation.
46 00 TREMOLO An effect that cyclically modulates the volume.
47 00 AUTO PAN A program that cyclically moves that sound image to left and right, front and back.
48 00 PHASER1 Cyclically changes the phase to add modulation to the sound.
48 08 PHASER2 Phaser with stereo input.
49 00 DISTORTION Adds a sharp-edged distortion to the sound.
4A 00 OVER DRIVE Adds mild distortion to the sound.
4B 00 AMP SIMULATOR A simulation of a guitar amp.
4C 00 3BAND EQ (MONO) A mono EQ with adjustable LOW, MID, and HIGH equalizing.
4D 00 2BAND EQ (STEREO) A stereo EQ with adjustable LOW and HIGH. Ideal for drum Parts.
4E 00 AUTO WAH (LFO) Cyclically modulates the center frequency of a wah filter. With an AC1 etc. this can function as a pedal wah.
40 00 THRU Bypass without applying any effect.
* MSB, LSB is represented in hexadecimal.
* LCB=0 is the basic effect type.
90
DGC1B
Effect Parameter List

No Parameter Range Value See Con- No Parameter Range Value See Con-
Table trol Table trol
HALL1, HALL2, ROOM 1, 2, 3, STAGE 1, 2, PLATE ECHO
1 Reverb Time 0.3~30.0s 0-69 table#4 1 Lch Delay1 0.1~355.0ms 1-3350
2 Diffusion 0~10 0-10 2 Lch Feedback Level -63~+63 1-127
3 Initial Delay 0~63 0-63 table#5 3 Rch Delay1 0.1~355.0ms 1-3550
4 HPF Cutoff Thru~8.0kHz 0-52 table#3 4 Rch Feedback Level -63~+63 1-127
5 LPF Cutoff 1.0k~Thru 34-60 table#3 5 High Damp 0.1~1.0 1-10
6 6 Lch Delay2 0.1~355.0ms 1-3550
7 7 Rch Delay2 0.1~355.0ms 1-3550
8 8 Delay2 Level 0~127 0-127
9 9
10 Dry/Wet D63>W~D=W~D<W63 1-127 • 10 Dry/Wet D63>W~D=W~D<W63 1-127 •
11 Rev Delay 0~63 0-63 table#5 11
12 Density 0~3 0-3 12
13 Er/Rev Balance E63>R ~ E=R ~ E>R63 1-127 13 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
14 14 EQ Low Gain -12~+12dB 52-76
15 Feedback Level -63~+63 1-127 15 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
16 16 EQ High Gain -12~+12dB 52-76
WHITE ROOM, TUNNEL, BASEMENT CROSS DELAY
1 Reverb Time 0.3~30.0s 0-69 table#4 1 L->R Delay 0.1~355.0ms 1-3550
2 Diffusion 0~10 0-10 2 R->L Delay 0.1~355.0ms 1-3550
3 Initial Delay 0~63 0-63 table#5 3 Feedback Level -63~+63 1-127
4 HPF Cutoff Thru~8.0kHz 0-52 table#3 4 Input Select L, R, L&R 0-2
5 LPF Cutoff 1.0k~Thru 34-60 table#3 5 High Damp 0.1~1.0 1-10
6 Width 0.5~10.2m 0-37 table#11 6
7 Height 0.5~20.2m 0-73 table#11 7
8 Depth 0.5~30.2m 0-104 table#11 8
9 Wall Vary 0~30 0-30 9
11 Rev Delay 0~63 0-63 table#5 11
12 Density 0~3 0-3 12
13 Er/Rev Balance E63>R~E=R~E>R63 1-127 13 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
14 14 EQ Low Gain -12~+12dB 52-76
15 Feedback Level -63~+63 1-127 15 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
16 16 EQ High Gain -12~+12dB 52-76
DELAY L, C, R EARLY REF1, EARLY REF2
1 Lch Delay 0.1~715.0ms 1-7150 1 Type S-H, L-H, Rdm, Rvs, Plt, Spr 0-5
2 Rch Delay 0.1~715.0ms 1-7150 2 Room Size 0.1~7.0 0-44 table#6
3 Cch Delay 0.1~715.0ms 1-7150 3 Diffusion 0~10 0-10
4 Feedback Delay 0.1~715.0ms 1-7150 4 Initial Delay 0~63 0-63 table#5
5 Feedback Level -63~+63 1-127 5 Feedback Level -63~+63 1-127
6 Cch Level 0~127 0-127 6 HPF Cutoff Thru~8.0kHz 0-52
7 High Damp 0.1~1.0 1-10 7 LPF Cutoff 1.0k~Thru 34-60
8 8
9 9
11 11 Liveness 0~10 0-10
12 12 Density 0~3 0-3
13 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 13 High Damp 0.1~1.0 1-10
14 EQ Low Gain -12~+12dB 52-76 14
15 EQ High Frequency 500Hz~16.0kHz 28-58 table#3 15
16 EQ High Gain -12~+12dB 52-76 16
DELAY L, R GATE REVERB, REVERSE GATE
1 Lch Delay 0.1~715.0ms 1-7150 1 Type TypeA, TypeB 0-1
2 Rch Delay 0.1~715.0ms 1-7150 2 Room Size 0.1~7.0 0-44 table#6
3 Feedback Delay1 0.1~715.0ms 1-7150 3 Diffusion 0~10 0-10
4 Feedback Delay2 0.1~715.0ms 1-7150 4 Initial Delay 0~63 0-63 table#5
5 Feedback Level -63~+63 1-127 5 Feedback Level -63~+63 1-127
6 High Damp 0.1~1.0 1-10 6 HPF Cutoff Thru~8.0kHz 0-52
7 7 LPF Cutoff 1.0k~Thru 34-60
8 8
9 9
11 11 Liveness 0~10 0-10
12 12 Density 0~3 0-3
13 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 13 High Damp 0.1~1.0 1-10
14 EQ Low Gain -12~+12dB 52-76 14
15 EQ High Frequency 500Hz~16.0kHz 28-58 table#3 15
16 EQ High Gain -12~+12dB 52-76 16
• : Can be controlled by AC1 (Assignable Controller 1)
No.* : T hese numbers correspond to the Parameter Suffix numbers in <Table 1-3>
See Table** : Refer to “Effect Data Assign Table” 91
DGC1B
KARAOKE 1, 2, 3 ROTARY SPEAKER
1 Delay Time 0~127 0-127 table#7 1 LFO Frequency 0.00~39.7Hz 0-127 table#1 •
2 Feedback Level -63~+63 1-127 2 LFO Depth 0~127 0-127
3 HPF Cutoff Thru~8.0kHz 0-52 3
4 LPF Cutoff 1.0k~Thru 34-60 4
5 5
6 6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
7 7 EQ Low Gain -12~+12dB 52-76
8 8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
9 9 EQ High Gain -12~+12dB 52-76
10 Dry/Wet D63>W~D=W~D<W63 1-127 • 10 Dry/Wet D63>W~D=W~D<W63 1-127
11 11
12 12
13 13
14 14
15 15
16 16
CHORUS 1, 2, 3, 4, CELESTE 1, 2, 3, 4 TREMOLO
1 LFO Frequency 0.00~39.7Hz 0-127 table#1 1 LFO Frequency 0.00~39.7Hz 0-127 table#1 •
2 LFO PM Depth 0~127 0-127 2 AM Depth 0~127 0-127
3 Feedback Level -63~+63 1-127 3 PM Depth 0~127 0-127
4 Delay Offset 0~127 0-127 table#2 4
5 5
6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
7 EQ Low Gain -12~+12dB 52-76 7 EQ Low Gain -12~+12dB 52-76
8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3 8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
9 EQ High Gain -12~+12dB 52-76 9 EQ High Gain -12~+12dB 52-76
10 Dry/Wet D63>W~D=W~D<W63 1-127 • 10
11 11
12 12
13 13
14 14 -180~+180deg 4-124
15 Input Mode mono/stereo 0-1 15 Input Mode mono/stereo 0-1
16 16
FLANGER 1, 2, 3 AUTO PAN
1 LFO Frequency 0.00~39.7Hz 0-127 table#1 1 LFO Frequency 0.00~39.7Hz 0-127 table#1 •
2 LFO Depth 0~127 0-127 2 L/R Depth 0~127 0-127
3 Feedback Level -63~+63 1-127 3 F/R Depth 0~127 0-127
4 Delay Offset 0~63 0-63 table#2 4 PAN Direction L<->R, L->R, L<-R,
5 Lturn, Rturn, L/R 0-5
6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 5
7 EQ Low Gain -12~+12dB 52-76 6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3 7 EQ Low Gain -12~+12dB 52-76
9 EQ High Gain -12~+12dB 52-76 8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
10 Dry/Wet D63>W~D=W~D<W63 1-127 • 9 EQ High Gain -12~+12dB 52-76
11 10
12 11
13 12
14 LFO Phase Difference -180~+180deg 4-124 13
15 14
16 15
SYMPHONIC 16
1 LFO Frequency 0.00~39.7Hz 0-127 table#1 PHASER1, PHASER2
2 LFO Depth 0~127 0-127 1 LFO Frequency 0.00~39.7Hz 0-127 table#1
3 Delay Offset 0~127 0-127 table#2 2 LFO Depth 0~127 0-127
4 3 Phase Shift 0~127 0-127
5 4 Feedback Level -63~+63 1-127
6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 5
7 EQ Low Gain -12~+12dB 52-76 6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3 7 EQ Low Gain -12~+12dB 52-76
9 EQ High Gain -12~+12dB 52-76 8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
10 Dry/Wet D63>W~D=W~D<W63 1-127 • 9 EQ High Gain -12~+12dB 52-76
11 10 Dry/Wet D63>W~D=W~D<W63 1-127 •
12 11 Stage 3~10 3-10
13 12 Diffusion Mono/Stereo 0-1
14 13 LFO Phase Di -180~+180deg 4-124
15 14
16 15
16
See Table** : Refer to “Effect Data Assign Table”
92
DGC1B
DISTORTION, OVERDRIVE 2-BAND EQ
1 Drive 0~127 0-127 • 1 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
2 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3 2 EQ Low Gain -12~+12dB 52-76
3 EQ Low Gain -12~+12dB 52-76 3 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
4 LPF Cutoff 1.0k~Thru 34-60 table#3 4 EQ High Gain -12~+12dB 52-76
5 Output Level 0~127 0-127 5
6 6
7 EQ Mid Frequency 500Hz~10.0kHz 28-54 table#3 7
8 EQ Mid Gain -12~+12dB 52-76 8
9 EQ Mid Width 1.0~12.0 10-120 9
10 Dry/Wet D63>W~D=W~D<W63 1-127 10
11 Edge (Clip Curve) 0~127 0-127 mild ~sharp 11 EQ Mid Frequency 100Hz~10.0kHz 14-54 table#3
12 12 EQ Mid Gain -12~+12dB 52-76
13 13 EQ Mid Width 1.0~12.0 10-120
14 14
15 15
16 16
GUITAR AMP SIMULATOR AUTO WAH
1 Drive 0~127 0-127 • 1 LFO Frequency 0.00~39.7Hz 0-127 table#1
2 AMP Type Off, Stack, Combo, Tube 0-3 2 LFO Depth 0~127 0-127
3 LPF Cutoff 1.0k~Thru 34-60 table#3 3 Cutoff Frequency 0~127 0-127 •
4 Output Level 0~127 0-127 4 Resonance 1.0~12.0 10-120
5 5
6 6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
7 7 EQ Low Gain -12~+12dB 52-76
8 8 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
9 9 EQ High Gain -12~+12dB 52-76
10 Dry/Wet D63>W~D=W~D<W63 1-127 10 Dry/Wet D63>W~D=W~D<W63 1-127
11 Edge (Clip Curve) 0~127 0-127 mild ~sharp 11
12 12
13 13
14 14
15 15
16 16
3-BAND EQ
1 EQ Low Gain -12~+12dB 52-76
2 EQ Mid Frequency 500Hz~10.0kHz 28-54 table#3
3 EQ Mid Gain -12~+12dB 52-76
4 EQ Mid Width 1.0~12.0 10-120
5 EQ High Gain -12~+12dB 52-76
6 EQ Low Frequency 50Hz~2.0kHz 8-40 table#3
7 EQ High Frequency 500Hz~16.0kHz 28-58 table#3
8
9
10
11
12
13
14
15
16
See Table** : Refer to “Effect Data Assign Table”
93
DGC1B
Effect Data Assign Table

Table#1 Table#2 Table#3 Table#4
LFO Frequency (Hz) Modulation Delay Offset (ms) EQ Frequency (Hz) Reverb Time (ms)
Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value
0 0.00 43 1.81 86 5.38 0 0.0 43 4.3 86 8.6 0 THRU(20) 43 2.8k 0 0.3 43 4.6
1 0.04 44 1.85 87 5.55 1 0.1 44 4.4 87 8.7 1 22 44 3.2k 1 0.4 44 4.7
2 0.08 45 1.89 88 5.72 2 0.2 45 4.5 88 8.8 2 25 45 3.6k 2 0.5 45 4.8
3 0.13 46 1.94 89 6.06 3 0.3 46 4.6 89 8.9 3 28 46 4.0k 3 0.6 46 4.9
4 0.17 47 1.98 90 6.39 4 0.4 47 4.7 90 9.0 4 32 47 4.5k 4 0.7 47 5.0
5 0.21 48 2.02 91 6.73 5 0.5 48 4.8 91 9.1 5 36 48 5.0k 5 0.8 48 5.5
6 0.25 49 2.06 92 7.07 6 0.6 49 4.9 92 9.2 6 40 49 5.6k 6 0.9 49 6.0
7 0.29 50 2.10 93 7.40 7 0.7 50 5.0 93 9.3 7 45 50 6.3k 7 1.0 50 6.5
8 0.34 51 2.15 94 7.74 8 0.8 51 5.1 94 9.4 8 50 51 7.0k 8 1.1 51 7.0
9 0.38 52 2.19 95 8.08 9 0.9 52 5.2 95 9.5 9 56 52 8.0k 9 1.2 52 7.5
10 0.42 53 2.23 96 8.41 10 1.0 53 5.3 96 9.6 10 63 53 9.0k 10 1.3 53 8.0
11 0.46 54 2.27 97 8.75 11 1.1 54 5.4 97 9.7 11 70 54 10.0k 11 1.4 54 8.5
12 0.51 55 2.31 98 9.08 12 1.2 55 5.5 98 9.8 12 80 55 11.0k 12 1.5 55 9.0
13 0.55 56 2.36 99 9.42 13 1.3 56 5.6 99 9.9 13 90 56 12.0k 13 1.6 56 9.5
14 0.59 57 2.40 100 9.76 14 1.4 57 5.7 100 10.0 14 100 57 14.0k 14 1.7 57 10.0
15 0.63 58 2.44 101 10.10 15 1.5 58 5.8 101 11.1 15 110 58 16.0k 15 1.8 58 11.0
16 0.67 59 2.48 102 10.80 16 1.6 59 5.9 102 12.2 16 125 59 18.0k 16 1.9 59 12.0
17 0.72 60 2.52 103 11.40 17 1.7 60 6.0 103 13.3 17 140 60 THRU(20.0k) 17 2.0 60 13.0
18 0.76 61 2.57 104 12.10 18 1.8 61 6.1 104 14.4 18 160 18 2.1 61 14.0
19 0.80 62 2.61 105 12.80 19 1.9 62 6.2 105 15.5 19 180 19 2.2 62 15.0
20 0.84 63 2.65 106 13.50 20 2.0 63 6.3 106 17.1 20 200 20 2.3 63 16.0
21 0.88 64 2.69 107 14.10 21 2.1 64 6.4 107 18.6 21 225 21 2.4 64 17.0
22 0.93 65 2.78 108 14.80 22 2.2 65 6.5 108 20.2 22 250 22 2.5 65 18.0
23 0.97 66 2.86 109 15.50 23 2.3 66 6.6 109 21.8 23 280 23 2.6 66 19.0
24 1.01 67 2.94 110 16.20 24 2.4 67 6.7 110 23.3 24 315 24 2.7 67 20.0
25 1.05 68 3.03 111 16.80 25 2.5 68 6.8 111 24.9 25 355 25 2.8 68 25.0
26 1.09 69 3.11 112 17.50 26 2.6 69 6.9 112 26.5 26 400 26 2.9 69 30.0
27 1.14 70 3.20 113 18.20 27 2.7 70 7.0 113 28.0 27 450 27 3.0
28 1.18 71 3.28 114 19.50 28 2.8 71 7.1 114 29.6 28 500 28 3.1
29 1.22 72 3.37 115 20.90 29 2.9 72 7.2 115 31.2 29 560 29 3.2
30 1.26 73 3.45 116 22.20 30 3.0 73 7.3 116 32.8 30 630 30 3.3
31 1.30 74 3.53 117 23.60 31 3.1 74 7.4 117 34.3 31 700 31 3.4
32 1.35 75 3.62 118 24.90 32 3.2 75 7.5 118 35.9 32 800 32 3.5
33 1.39 76 3.70 119 26.20 33 3.3 76 7.6 119 37.5 33 900 33 3.6
34 1.43 77 3.87 120 27.60 34 3.4 77 7.7 120 39.0 34 1.0k 34 3.7
35 1.47 78 4.04 121 28.90 35 3.5 78 7.8 121 40.6 35 1.1k 35 3.8
36 1.51 79 4.21 122 30.30 36 3.6 79 7.9 122 42.2 36 1.2k 36 3.9
37 1.56 80 4.37 123 31.60 37 3.7 80 8.0 123 43.7 37 1.4k 37 4.0
38 1.60 81 4.54 124 33.00 38 3.8 81 8.1 124 45.3 38 1.6k 38 4.1
39 1.64 82 4.71 125 34.30 39 3.9 82 8.2 125 46.9 39 1.8k 39 4.2
40 1.68 83 4.88 126 37.00 40 4.0 83 8.3 126 48.4 40 2.0k 40 4.3
41 1.72 84 5.05 127 39.70 41 4.1 84 8.4 127 50.0 41 2.2k 41 4.4
42 1.77 85 5.22 42 4.2 85 8.5 42 2.5k 42 4.5
Table#5 Table#6 Table#7 Table#8

Delay Time (ms) Room Size (m) Delay Time (ms) Reverb Width; Depth; Height
Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value Data Value
0 0.1 43 67.8 86 135.5 0 0.1 43 6.8 0 0.1 43 135.5 86 270.9 0 0.5 43 11.8 86 24.2
1 1.7 44 69.4 87 137.0 1 0.3 44 7.0 1 3.2 44 138.6 87 274.0 1 0.8 44 12.1 87 24.5
2 3.2 45 70.9 88 138.6 2 0.4 2 6.4 45 141.8 88 277.2 2 1.0 45 12.3 88 24.9
3 4.8 46 72.5 89 140.2 3 0.6 3 9.5 46 144.9 89 280.3 3 1.3 46 12.6 89 25.2
4 6.4 47 74.1 90 141.8 4 0.7 4 12.7 47 148.1 90 283.5 4 1.5 47 12.9 90 25.5
5 8.0 48 75.7 91 143.3 5 0.9 5 15.8 48 151.2 91 286.6 5 1.8 48 13.1 91 25.8
6 9.5 49 77.2 92 144.9 6 1.0 6 19.0 49 154.4 92 289.8 6 2.0 49 13.4 92 26.1
7 11.1 50 78.8 93 146.5 7 1.2 7 22.1 50 157.5 93 292.9 7 2.3 50 13.7 93 26.5
8 12.7 51 80.4 94 148.1 8 1.4 8 25.3 51 160.7 94 296.1 8 2.6 51 14.0 94 26.8
9 14.3 52 81.9 95 149.6 9 1.5 9 28.4 52 163.8 95 299.2 9 2.8 52 14.2 95 27.1
10 15.8 53 83.5 96 151.2 10 1.7 10 31.6 53 167.0 96 302.4 10 3.1 53 14.5 96 27.5
11 17.4 54 85.1 97 152.8 11 1.8 11 34.7 54 170.1 97 305.5 11 3.3 54 14.8 97 27.8
12 19.0 55 86.7 98 154.4 12 2.0 12 37.9 55 173.3 98 308.7 12 3.6 55 15.1 98 28.1
13 20.6 56 88.2 99 155.9 13 2.1 13 41.0 56 176.4 99 311.8 13 3.9 56 15.4 99 28.5
14 22.1 57 89.8 100 157.5 14 2.3 14 44.2 57 179.6 100 315.0 14 4.1 57 15.6 100 28.8
15 23.7 58 91.4 101 159.1 15 2.5 15 47.3 58 182.7 101 318.1 15 4.4 58 15.9 101 29.2
16 25.3 59 93.0 102 160.6 16 2.6 16 50.5 59 185.9 102 321.3 16 4.6 59 16.2 102 29.5
17 26.9 60 94.5 103 162.2 17 2.8 17 53.6 60 189.0 103 324.4 17 4.9 60 16.5 103 29.9
18 28.4 61 96.1 104 163.8 18 2.9 18 56.8 61 192.2 104 327.6 18 5.2 61 16.8 104 30.2
19 30.0 62 97.7 105 165.4 19 3.1 19 59.9 62 195.3 105 330.7 19 5.4 62 17.1
20 31.6 63 99.3 106 166.9 20 3.2 20 63.1 63 198.5 106 333.9 20 5.7 63 17.3
21 33.2 64 100.8 107 168.5 21 3.4 21 66.2 64 201.6 107 337.0 21 5.9 64 17.6
22 34.7 65 102.4 108 170.1 22 3.5 22 69.4 65 204.8 108 340.2 22 6.2 65 17.9
23 36.3 66 104.0 109 171.7 23 3.7 23 72.5 66 207.9 109 343.3 23 6.5 66 18.2
24 37.9 67 105.6 110 173.2 24 3.9 24 75.7 67 211.1 110 346.5 24 6.7 67 18.5
25 39.5 68 107.1 111 174.8 25 4.0 25 78.8 68 214.2 111 349.6 25 7.0 68 18.8
26 41.0 69 108.7 112 176.4 26 4.2 26 82.0 69 217.4 112 352.8 26 7.2 69 19.1
27 42.6 70 110.3 113 178.0 27 4.3 27 85.1 70 220.5 113 355.9 27 7.5 70 19.4
28 44.2 71 111.9 114 179.5 28 4.5 28 88.3 71 223.7 114 359.1 28 7.8 71 19.7
29 45.7 72 113.4 115 181.1 29 4.6 29 91.4 72 226.8 115 362.2 29 8.0 72 20.0
30 47.3 73 115.0 116 182.7 30 4.8 30 94.6 73 230.0 116 365.4 30 8.3 73 20.2
31 48.9 74 116.6 117 184.3 31 5.0 31 97.7 74 233.1 117 368.5 31 8.6 74 20.5
32 50.5 75 118.2 118 185.8 32 5.1 32 100.9 75 236.3 118 371.7 32 8.8 75 20.8
33 52.0 76 119.7 119 187.4 33 5.3 33 104.0 76 239.4 119 374.8 33 9.1 76 21.1
34 53.6 77 121.3 120 189.0 34 5.4 34 107.2 77 242.6 120 378.0 34 9.4 77 21.4
35 55.2 78 122.9 121 190.6 35 5.6 35 110.3 78 245.7 121 381.1 35 9.6 78 21.7
36 56.8 79 124.4 122 192.1 36 5.7 36 113.5 79 248.9 122 384.3 36 9.9 79 22.0
37 58.3 80 126.0 123 193.7 37 5.9 37 116.6 80 252.0 123 387.4 37 10.2 80 22.4
38 59.9 81 127.6 124 195.3 38 6.1 38 119.8 81 255.2 124 390.6 38 10.4 81 22.7
39 61.5 82 129.2 125 196.9 39 6.2 39 122.9 82 258.3 125 393.7 39 10.7 82 23.0
40 63.1 83 130.7 126 198.4 40 6.4 40 126.1 83 261.5 126 396.9 40 11.0 83 23.3
41 64.6 84 132.3 127 200.0 41 6.5 41 129.2 84 264.6 127 400.0 41 11.2 84 23.6
42 66.2 85 133.9 42 6.7 42 132.4 85 267.7 42 11.5 85 23.9
94
TM
DGC1B
PARTS LIST
CONTENTS
UNIT COMPARISON ............................................................... 2
OVERALL ASSEMBLY ............................................................. 3
AMPLIFIER UNIT ..................................................................... 7
CONTROL ASSEMBLY .......................................................... 10
PANEL UNIT .......................................................................... 12
SPEAKER BOX ASSEMBLY .................................................. 13
KEY DRIVE UNIT .................................................................... 14
PEDAL DRIVE UNIT ............................................................... 16
KEY SENSOR UNIT ............................................................... 18
MA120 ASSEMBLY ............................................................... 19
ELECTRICAL PARTS ......................................................... 20-44
Notes : DESTINATION ABBREVIATIONS

A: Australian model Q: South-east Asia model
B: British model T: Taiwan model
C: Canadian model U: U.S.A. model
D: German model V: General export model (110V)
E: European model W: General export model (220V)
F: French model APTH: General export model (220V)
H: North European model N,X: General export model
I : Indonesian model Y: Export model
J : Japanese model APTW: Taiwan model
M: South African model APHK: Hong Kong model
O: Chinese model
WARNING
Components having special characteristics are marked and must be replaced with parts having
specification equal to those originally installed.
The numbers “QTY” show quantities for each unit.

The parts with “--” in “PART NO.” are not available as spare parts.
This mark “ } ” in the REMARKS column means these parts are interchangeable.
The second letter of the shaded ( ) part number is O, not zero.
The second letter of the shaded ( ) part number is I, not one.
DGC1B
UNIT COMPARISON
Overall Assembly (WH64210) Speaker Box Assembly Left+Right (V559220)

Control Assembly (WJ01510) Speaker Box Unit Left (V525070)
Control Unit (WJ01520) Speaker Box Assembly V5250500
CONTROLLER (CTRL) Circuit Board WJ089800 Speaker (16.0 cm) XQ797C00
3.5” FDD V6492300 Speaker (2.5 cm) XI168A00
CD PANEL Circuit Board WG917800 NW Circuit Board V5251300
1/2” CD-ROM V7194700 Speaker Box Unit Right (V525080)
WA111200 Speaker Box Assembly V5250600
ATAPI (DA) Circuit Board V5255500 Speaker (16.0 cm) XQ797C00
DSP Circuit Board V5254300 Speaker (2.5 cm) XI168A00
Panel Unit CD (WJ01530) NW Circuit Board V5251300
Panel V3187500 Amplifier Unit (WH64250)
LCD WC934600 MN Circuit Board V5908900
PASW Circuit Board V3795900 DB Circuit Board V3069000
Key Sensor Unit WJ030900 JACK1 Circuit Board WG546100
KEY SENSOR Circuit Board WJ031000 FU Circuit Board (V525850)
Key Drive Unit V5788300 NF Circuit Board WG000600
PK-CTL Circuit Board V5202200 Power Transformer XQ426A00
DRIVE A Circuit Board VN588200 PWB Circuit Board VN543300
DRIVE B Circuit Board VN588300 DB Unit (VN81290)
DRIVE C Circuit Board VN588400 DI Unit (VN81320)
CTRL G Circuit Board VT836600 H IC Unit (VN81310)
Coil Assembly (Front Yellow) (V524600) PW Unit (VN81330)
Coil Assembly (Front Green) (V524610) MA120 Assembly VT492000
Coil Assembly (Front Black) V5246200 MA120 Circuit Board VT143200
Coil Assembly (Rear Yellow) (V524630) AC Cord Set VP185200
Coil Assembly (Rear Green) (V524640) Remote Controller V5179500
Coil Assembly (Rear Black) V5246500
Pedal Drive Unit VP191600
PEDAL DRIVE Circuit Board VP188700
The parts that correspond to the number with ( ) are not prepared as service parts.
2
DGC1B
OVERALL ASSEMBLY
Right side view
170 170a 170b
B
60
62S
83S
81S 84S 93
82S
1
Control assembly: See page 10.
70 Key drive unit:

A view See page 14.
91
90 Pedal drive unit:
92 See page 16.
B view
1
63 64S
Control assembly:
See page 10. 60
62S
3
DGC1B
Bottom view
Amplifier unit:
See page 7.
B120 270
B126S
B232
B121S B233S
Speaker box assembly:
B125 See page 13.
B128S
Speaker box assembly: 2
See page 13.
2 B131S
B131S
81S 260 262S

250 251S C
272S 271 80 82S Key drive unit:
303 See page 14.
301S 70
71
302S 72
300
76S
305S
73S
250 74S
251S 75S
84S 83S
77S
150S
1 Control assembly: See page 10.
C view B274S High sound (right) side section

221S 262S
B273 220 230 261
263 191S 202S 304
240 200 201S
231S 190 192S
241S 222
4
DGC1B
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY RANK

OVERALL ASSEMBLY 総組立 DGC1B
-- Overall Assembly Ｐプレーヤ総組立 (WH64210)
1 -- Control Assembly Black DKC60RCD コントロールＡｓｓ ' ｙ (WJ01510)
2 -- Speaker Box Assembly LEFT+RIGHT ＳＰ．ＢＯＸＡｓｓ ' ｙ (V559220)
* 60 WJ030900 Key Sensor Unit GEK2(KS1) キーセンサユニット

63 CB065520 Nylon Clamp NK-3N ナイロンクランプ 2 01
70 V5788300 Key Drive Unit Black GA1 UL キードライブユニット 83
71 VH113300 Spacer, Key Drive Ｋドライブスペーサ 6 05
72 VJ411300 Spacer, Key Drive Ｋドライブスペーサ 2 05
80 VP183800 Drive Holder GP ドライブ受 05
90 VP191600 Pedal Drive Unit Black Ｐ．ドライブユニット 69
91 VP187800 Pedal Main Cover ペダルメインカバー 13
92 -- Label Pedal adjustment ペダル調整ラベル (VP18850)
93 VV224500 Ferrite Core Black SFC-10 フェライトコア（カット） 07
170 WC870100 Shutter Assembly GS GP シャッターＡｓｓ ' ｙ 88 02
170a WC368200 Key Shutter Gray Scale GP ＫＳグレスケールＧＰ 88 01
170b V7977900 Key Shutter Gray Scale Block UPS ＫＳＧＳブロック 88
190 -- Nylon Clamp Black NK-14N ナイロンクランプ (V574900)
200 CB818120 Nylon Clamp NK-4N ナイロンクランプ 2 01
220 -- Plate GP 奥かまちプレート (V579070)
222 CB069250 Cord Holder BK-1 インシュロックタイ 2 01
230 -- Nylon Clamp Black NK-14N ナイロンクランプ (V574900) 4
240 VP359000 Nylon Clamp Black NK-8N ナイロンクランプ 01
250 CB040540 Cord Binder S-72B-E L=50 束線止め 2 01
260 -- Nylon Clamp Black NK-5N ナイロンクランプ (VP35910)
261 CB817510 Cord Binder S-14B-E,S-14 束線止め 2 03
263 VV910400 Clamp Filter ZCAT3035-1330 クランプフィルタ 07
270 VP185200 AC Cord Set UC 3P 10A 電源コードセット 08
271 -- Nylon Clamp Black NK-5N ナイロンクランプ (VP35910)
300 -- Label UC 120 銘板シール１２０ (V526190)
303 -- Caution Mark MKX-5 UL コーションマーク (VB95110) 2
304 -- Caution Label B アクション注意ラベル (V264370)
62S WF109400 Bind Head Tapping Screw-1 3.0X10 MFZN2B3 ＴＰ＃１＋ＢＩＮＤ 16 01
64S WF109400 Bind Head Tapping Screw-1 3.0X10 MFZN2B3 ＴＰ＃１＋ＢＩＮＤ 2 01
* 73S WF113900 Bolt 6.0X50 MFZN2B3 ボルト６ＳＯＣＫ 4
* 74S WF556600 Flat Washer 6.0X13X1.0 MFZN2B3 平座みがき丸 4
* 75S WF578500 Spring Washer 6.0 MFZN2B3 バネ座金 4
* 76S WF110100 Truss Head Tapping Screw-1 4.0X30 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 4
* 77S WF585100 Nut 6.0X25.0 D ナットオニメ 4
* 81S WE996400 Bind Head Screw 5.0X16 MFZN2B3 小ネジ＋ＢＩＮＤ 2
* 82S WF584700 Hexagonal Nut M5 #1 MFZN2B3 ナット６角 2
* 83S WF110100 Truss Head Tapping Screw-1 4.0X30 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 4
* 84S WE969300 Bind Head Screw 5.0X10 MFZN2W3 小ネジ＋ＢＩＮＤ
* 150S WF581700 Nut 5.0X13.0 D ナットオニメ 3
191S WE965600 Truss Head Tapping Screw-1 4.0X16 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 01
192S WF106500 Bind Head Screw IT 4.0X8 MFZN2W3 小ネジ＋ＢＩＮＤ 01
201S WE965200 Truss Head Tapping Screw-1 4.0X12 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 2 01
202S WF108700 Pan Head Tapping Screw-1 2.6X16 MFZN2B3 ＴＰ＃１＋ＰＡＮ 2 01
301S -- Model Name Label モデル名シール (WJ01680)
302S VA039300 Label ラベル 03
305S -- Label SER.NO. MODEL NAME 製番シール (WH65060)
B120 -- Amplifier Unit Black UL アンプユニット (WH64250)

B125 VP343900 Angle, Power Supply 電源アングル 09
B232 VP939400 Cord Binder L L=210 コード止めバンドＬ 04
B273 VP939400 Cord Binder L L=210 コード止めバンドＬ 04
* B121S WF107600 Pan Washer Head Screw 4.0X8 MFZN2B3 小ネジ＋ＰＷＨ 6
* B126S WF110100 Truss Head Tapping Screw-1 4.0X30 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 4
B128S WE965300 Truss Head Tapping Screw-1 4.0X20 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 2 01
* B131S WF581700 Nut 5.0X13.0 D ナットオニメ 6
B233S VP960600 Staple B1214 5000 ステープル 2 09
B274S VP960600 Staple B1214 5000 ステープル 2 09
: New Parts RANK: Japan only
5
DGC1B

ACCESSORIES 付属品
* WJ508700 Floppy Disk DKV EX ドウコンソフトＤＫＶ
V 5 1 7 9 5 0 0 Remote Controller PPR-102E リモートコントローラ 11
-- Battery R6DW マンガン電池２ＰＣ (WA78070)
XY941A00 Compact Disk COVER-P-CASE 同梱ＣＤ − ＲＯＭ 07
6
DGC1B
AMPLIFIER UNIT
270
210 230 260 280 340 351
352G
162
162
353G
281 41
40
350
43G
121
71G
81G
360
127
204 70
42G 202G 71G
113G 203G 200
200 160 70
200a
200b
201G
150 133
130 140
MA120
assembly:
135 161G See page 19.
134
135
141G
151G 131G
131G 80
331 250
104
131G 103 103a 103b
136
330 240
123G 80
128
240a
124 128G 101
120
100
390
380 132
123G
102G
101
290a
290
111
111
370 50 110
372G 112G
51G 7
DGC1B

AMPLIFIER UNIT アンプユニット DGC1B
-- Amplifier Unit Black UL アンプユニット (WH64250)
40 V5257200 Amplifier Box アンプボックス 17
41 -- Caution Mark MKX-5 UL コーションマーク (VB95110)
50 V5257300 Box Cover U UPPER ボックスカバー上 09
70 -- Support BASE サポートＢＡＳＥ (VP09250) 2
80 V5257500 Bracket MN ＭＮ取付金具 2 03
100 V5908900 Circuit Board MN ＭＮシート 48
101 CB040540 Cord Binder S-72B-E L=50 束線止め 2 01
103 -- Shield Unit MN ＭＮシールドユニット (V804090)
103a -- Shield Cover MN AMP ＭＮシールドカバー (V559740)
103b -- Insulating Sheet MN120 N-7 200X90 絶縁シートＭＮ１２０ (V804080)
104 CB817510 Cord Binder S-14B-E,S-14 束線止め 2 03
110 V3069000 Circuit Board DB ＤＢシート (V263610) 23
* 111 WG837500 Spacer ASB-314E L=14 六角スペーサー 2
* 120 WG546100 Circuit Board JACK1 ＪＡＣＫ１シート
121 WF559900 Hexagonal Nut M12X14X2 P=1.0 ナット特殊 4 01
124 -- Shield Cover AMP JK ＪＫシールドカバー (V559730)
127 CB028970 Knob Black ツマミ VOLUME,BASS,TREBLE 3 03
128 -- Shield Plate JK ＪＫシールドプレート (V639890)
130 -- Circuit Board FU ＦＵシート (V525850)
132 CB040540 Cord Binder S-72B-E L=50 束線止め 01
133 -- Connector Assembly AC CONNECTION 3P 束線ＡＣ中継 (WF88600)
* 134 WG000600 Circuit Board NF ＮＦシート
* 135 WG837700 Spacer BSB-330E L=30 六角スペーサー 3
136 CB040540 Cord Binder S-72B-E L=50 束線止め 01
140 VT492000 MA120 Assembly J,U ＭＡ１２０Ａｓｓ ' ｙ 23
150 XQ426A00 Power Transformer UL/CSA A 電源トランス 13
160 VN543300 Circuit Board PWB ＰＷＢパワー
162 -- Caution Label 注意書ラベル (VQ15160) 2
200 -- Connector Assembly POWER SW 3P 束線電源ＳＷ (V525770)
200a VH785100 Switch SDDT-DPST J.U.C.S. シーソーＳＷ MAINS ON/OFF 04
200b VN774700 AC Inlet M1816 3P ＡＣインレット３Ｐ AC LINE INLET 03
204 V6074400 Ferrite Core ESD-R-38D フェライトコア 07
210 V5624100 Connector Assembly GPS 5P/6P/7P/10P 束線ＧＰＳ 14
230 -- Connector Assembly MN-SENS 9P/11P/16P 束線ＭＮ−ＳＥＮＳ (WJ01670)
230a VC362700 Ferrite Core FR25/15/12-1400L フェライトコア 04
240 -- Connector Assembly CONNECTION-FU 束線中継 − ＦＵ (V525810)
250 -- Connector Assembly MA-JA2 VH 4P 束線ＭＡ−ＪＡ２ (V525820)
260 -- Connector Assembly JA-SP 2P/VH 8P 束線ＪＡ − ＳＰ (V525830)
270 VZ172500 Connector Assembly Black GDS-98B 15P 束線ＧＤＳ−９８Ｂ 24
280 WD041100 Connector Assembly Black CDSWP2 3.9m 束線ＣＤＳＷＰ２ 07
281 VV910400 Clamp Filter ZCAT3035-1330 クランプフィルタ 07
290 -- Connector Assembly JA-MN 5P/8P/10P 束線ＪＡ − ＭＮ (V526450)
330 VK105800 Connector Assembly KRD-KRD 7P-300 ＫＲＤ−ＫＲＤ束線 02
331 VC362700 Ferrite Core FR25/15/12-1400L フェライトコア 04
340 -- Connector Assembly KRD-KRD 9P-250 ＫＲＤ−ＫＲＤ束線 (VK10420)
350 VP603700 Bushing KG-024L 自在ブッシュ 01
351 CB818540 Cord Holder T-30RF-2 インシュロックタイ 2 01
370 V5261600 Holder, AMP. GP ＡＭＰ取付金具 03
380 V5600600 Connector Assembly VOL JACK PHR-8P 束線ＶＯＬ再専 03
390 V5600700 Connector Assembly HP JACK PH 7P 束線ＨＰ再専 02
42G -- Label 仕向けシール (V612770)
43G CB550900 Adhesive Tape 570F 30m W=10 粘着テープ 08
* 51G WG488800 Bonding Tapping Screw-C 4.0X8 MFZN2B3 Ｃタイト＋ＢＯＮＤ 5
* 71G WG488100 Bind Head Screw 4.0X5 MFZN2B3 小ネジ＋ＢＩＮＤ 4
81G WE877900 Bind Head Tapping Screw-S 3.0X6 MFZN2W3 Ｓタイト＋ＢＩＮＤ 4 01
128G WE974300 Bind Head Tapping Screw-S 4.0X6 MFZN2B3 Ｓタイト＋ＢＩＮＤ 2 01
* 161G WG488800 Bonding Tapping Screw-C 4.0X8 MFZN2B3 Ｃタイト＋ＢＯＮＤ 6
8
DGC1B

* 202G WG488400 Bind Head Screw OT 4.0X6 MFZN2B3 小ネジ＋ＢＩＮＤ
* 203G WF567400 Toothed Lock Washer-B 4.0 MFZN2B3 歯付座金外歯
352G WF000900 Bind Head Screw 4.0X30 MFZN2B3 小ネジ＋ＢＩＮＤ 01
* 353G WF557500 Hexagonal Nut M4 #1 ナット６角
372G WE980400 Bind Head Screw 4.0X10 MFZN2B3 小ネジ＋ＢＩＮＤ 01
9
DGC1B
CONTROL ASSEMBLY
Hanger assembly
H1
Control unit
1
H11G
H12G
C232G H11G
C300
H12G
C233G
C302G C222G
C301G
C220
C221
C234 C210
C230 C240 C201G
C301G
C260 C200
C211G
C234G 71G
C231G
C211G
C250
70 C261G
C270 100
43G
93 43G
C150
42G
90 91 40
72G
92 73
41G 42G
C141G 41G
C101G C140
C102G 60 74G
12G 61G
80a
C120 10
22 50
C110
11G 80
81G 50
C100
21G
50
20
Panel unit: See page 12.
Sounder assembly
21G
10
DGC1B

CONTROL ASSEMBLY コントロールＡｓｓ ' ｙ DGC1B
-- Control Assembly Black DKC60RCD コントロールＡｓｓ ' ｙ (WJ01510)
1 -- Control Unit Black DKC60RCD コントロールユニット (WJ01520)
H1 V 5 2 3 8 6 00 Hanger Assembly Black ハンガーＡｓｓ ' ｙ黒 08
* H11G WG489400 Flat Head Screw 4.0X10 MFZN2B3 小ネジ＋ＦＬＡＴ 4
H12G WE969200 Bind Head Screw 5.0X12 MFZN2B3 小ネジ＋ＢＩＮＤ 3 01
-- Control Unit Black DKC60RCD コントロールユニット (WJ01520)

10 V 3 1 8 8 0 00 Bottom Chassis LC ボトムシャーシ 09
20 -- Panel Unit CD Black DKC60RCD パネルユニットＣＤ (WJ01530)
22 -- Panel Shield Cover CON パネルシールドカバー (V943280)
40 V 3 1 8 8 2 00 FDD Base LC ベースＦＤＤ 05
50 CB826590 Foot SJ-5023 ゴムアシ 4 02
60 AA058660 Transistor Holder トランジスターホルダー 03
* 70 WJ089800 Circuit Board CONTROLLER (CTRL) コントローラシート
73 VN632900 Lock Screw RDG-LNA-W1(01) ロックネジ 2 01
80 V 3 7 9 6 8 00 Sounder Assembly PH 2P/PHR-6P サウンダＡｓｓ ' ｙ 03
80a XE143A00 Speaker PKM22EPPH4001-B0 スピーカ Beep 02
90 V 3 7 9 6 6 00 FFC Cable P=1.0-K-16-172 ＦＦＣケーブル 02
91 V 3 7 9 6 7 00 FFC Cable P=1.0-K-21-120 ＦＦＣケーブル 02
92 V 3 7 9 6 3 00 Connector Assembly FDD POWER XH 4P 束線ＦＤＤ電源 03
93 V 3 7 9 6 4 00 Connector Assembly FDD SIGNAL 34P 束線ＦＤＤ信号 07
100 V 6 4 9 2 3 00 3.5" Floppy Disk Drive 1M/2M ALPS DF3 ３．５ " ＦＤＤ 13
11G -- Label SER.NO ラベル (VP54470)
12G -- WEEE Mark Label ＷＥＥＥマークラベル (WG07730)
21G WE986900 Flat Head Tapping Screw-S 3.0X6 MFZN2B3 Ｓタイト＋ＦＬＡＴ 5 01
* 41G WG000800 Screw 3X7X3 MFZN2-W3 ショルデックねじ 4
42G VT706900 Grommet G-462-1 グロメット 4 04
* 61G WF304400 Bind Head Screw 3.0X10 MFZN2B3 小ネジ＋ＢＩＮＤ
72G WF507300 Bind Head Tapping Screw-P 3.0X12 MFZN2B3 Ｐタイト＋ＢＩＮＤ 2 01
74G WG488600 Bonding Tapping Screw-C 3.0X6 MFZN2B3 Ｃタイト＋ＢＯＮＤ
81G -- Adhesive Tape 両面粘着テープ (VP55650)
C100 V 4 8 7 8 7 00 Panel CD パネル 06
* C110 WG918000 7SEG. LED Cover CD VER.B ７ＳｅｇマスクＢ海外
C120 V 4 8 7 9 0 00 Key Top CD キートップ SELECT <,> 04
* C140 WG917800 Circuit Board CD PANEL シートＣＤパネル
C150 V 5 2 5 5 8 00 FFC Cable CDPA P=1.0-12-180 ＦＦＣケーブルＣＤＰＡ 01
C200 -- Base CD ベース (V487880)
C210 V 7 1 9 4 7 00 1/2" CD-ROM Drive CR-177B １／２ " ＣＤ−ＲＯＭ 26
C210 WA111200 1/2" CD-ROM Drive SR244W1/R74-2121 １／２ " ＣＤ−ＲＯＭ 25
C220 V 5 2 5 5 5 00 Circuit Board ATAPI (DA) シートＡＴＡＰＩ 17
C221 V 5 1 9 1 4 00 Spacer, CD Connector スペーサＣＤコネクタ 02
C230 V 5 2 5 4 3 00 Circuit Board DSP シートＤＳＰ 45
C234 -- DSP Shield Cover CON ＤＳＰシールドカバー (V607820)
C240 V 4 8 7 9 2 00 Support, MINI-DIN CD Ｍｉｎｉ＿ＤＩＮ 02
C250 V 5 8 6 7 6 00 FFC Cable ATA30 BNCD-K P=1.0 30-10 ＦＦＣケーブルＡＴＡ３０ 02
C260 V 5 8 6 7 7 00 FFC Cable ATA25 BNCD-P=1.0-K 25-13 ＦＦＣケーブルＡＴＡ２５ 02
C270 V J 9 8 2 9 00 Connector Assembly KRD-KRD 10P-200L ＫＲＤ−ＫＲＤ束線 05
C300 V 4 8 7 8 6 00 Top Cover CD トップカバーＣＤ 09
* C101G WG489200 Flat Head Tapping Screw-S 3.0X5 MFZN2B3 Ｓタイト＋ＦＬＡＴ 4
* C102G WG489100 Flat Head Tapping Screw-P 3.0X8 MFZN2B3 Ｐタイト＋ＦＬＡＴ
C141G WF267300 Bind Head Tapping Screw-P 2.6X8 MFZN2W3 Ｐタイト＋ＢＩＮＤ 3 01
C201G WE877800 Bind Head Tapping Screw-S 3.0X6 MFZN2B3 Ｓタイト＋ＢＩＮＤ 2 01
* C211G WG487100 Bind Head Screw 2.0X2.5 MFZN2W3 小ネジ＋ＢＩＮＤ 4
* C222G WG487600 Bind Head Screw 2.0X6 MFZN2W3 小ネジ＋ＢＩＮＤ 2
C231G WE877800 Bind Head Tapping Screw-S 3.0X6 MFZN2B3 Ｓタイト＋ＢＩＮＤ 2 01
C232G WF507300 Bind Head Tapping Screw-P 3.0X12 MFZN2B3 Ｐタイト＋ＢＩＮＤ 01
* C233G WF304400 Bind Head Screw 3.0X10 MFZN2B3 小ネジ＋ＢＩＮＤ 2
C234G WE972100 Bind Head Tapping Screw-S 3.0X8 MFZN2W3 Ｓタイト＋ＢＩＮＤ 2 01
C261G -- Adhesive Tape 両面粘着テープ (VP55650)
* C301G WG489400 Flat Head Screw 4.0X10 MFZN2B3 小ネジ＋ＦＬＡＴ 4
C302G WG488600 Bonding Tapping Screw-C 3.0X6 MFZN2B3 Ｃタイト＋ＢＯＮＤ 3
11
DGC1B
PANEL UNIT
30
51G
50
61G
40
20
60
10

PANEL UNIT CD パネルユニットＣＤ DGC1B
-- Panel Unit CD Black DKC60RCD パネルユニットＣＤ (WJ01530)
10 V 3 1 8 7 5 0 0 Panel LC パネル 08
20 V 3 1 8 7 8 0 0 Key Top LC キートップ PLAY/PAUSE,STOP,REC, 09
SONG SELECT REV•FWD,
PART L•R,ENTER,VOICE,<,>,
FUNC.,METRONOME,Selector,
-/NO,+/YES
30 V3187900 Key Top LC PW キートップＰＷ STANDBY/ON 03
* 40 WJ015400 LCD Cover CD DKC60RCD ＬＣＤマスク
* 50 WC934600 LCD 24X2+7 液晶ディスプレイ
60 V3795900 Circuit Board PASW ＰＡＳＷシート 14
* 51G WE973600 Bind Head Tapping Screw-P 2.6X8 MFZN2B3 Ｐタイト＋ＢＩＮＤ 3
* 61G WE973600 Bind Head Tapping Screw-P 2.6X8 MFZN2B3 Ｐタイト＋ＢＩＮＤ 8
12
DGC1B
SPEAKER BOX ASSEMBLY
Top view (Left) Side view (Left) Speaker saran net cover
L51G
L60
L50 30G
L80
L42G L90
L41G L61
L30
L40 L81G
L93 L32 R32
10
30G L31G
20
10
L92G 20
L70
L91G
L71G

SPEAKER BOX ASSEMBLY ＳＰ．ＢＯＸＡｓｓ ' ｙ DGC1B
-- Speaker Box Assembly LEFT+RIGHT ＳＰ．ＢＯＸＡｓｓ ' ｙ (V559220)
10 -- Speaker Box Unit LEFT ＳＰ．ＢＯＸユニット (V525070)
20 -- Speaker Box Unit RIGHT ＳＰ．ＢＯＸユニット (V525080)
-- Speaker Box Unit LEFT ＳＰ．ＢＯＸユニット (V525070)

L30 V5250500 Speaker Box Assembly LEFT ＳＰＢＯＸ集成 13
* L32 WA877000 Saran Net CLOTH RC-820-03UL サランネット
L40 XQ797C00 Speaker 16.0cm 8ohm 60W スピーカ WOOFER 10
L50 XI168A00 Speaker 2.5cm 8ohm 60W スピーカ TWEETER 10
L60 V5251300 Circuit Board NW ＮＷシート 08
L61 CB046030 Support, PCB LCBS-04T 基板サポート 4 01
L70 -- Connector Assembly SP-L VH 2P 束線ＳＰ − Ｌ (V525090)
L80 -- Connector Assembly SP-IN VH 4P 束線ＳＰ − ＩＮ (V525110)
L90 -- Speaker Angle Bracket A ＳＰアングル金具Ａ (V525140)
L93 -- Speaker Caution Seal GP E+J N コーションシールＮ (V632620)
L31G -- Felt GP 吸音材ＧＰ (V578890)
L41G VT301800 Packing W パッキン（Ｗ） 03
L42G WF109500 Bind Head Tapping Screw-1 4.0X16 MFZN2W3 ＴＰ＃１＋ＢＩＮＤ 4 01
L51G WF109500 Bind Head Tapping Screw-1 4.0X16 MFZN2W3 ＴＰ＃１＋ＢＩＮＤ 4 01
L71G CB070450 Cord Binder L=100 束線止め 2 01
L81G CB070450 Cord Binder L=100 束線止め 2 01
L91G WF694700 Nut B 4.0X9.5 MFZN2W3 鬼目ナット 4
L92G WF456600 Bind Head Screw 4.0X12 MFZN2B3 小ネジ＋ＢＩＮＤ 4 01
-- Speaker Box Unit RIGHT ＳＰ．ＢＯＸユニット (V525080)

R30 V5250600 Speaker Box Assembly RIGHT ＳＰＢＯＸ集成 13
* R32 WA877000 Saran Net CLOTH RC-820-03UL サランネット
R40 XQ797C00 Speaker 16.0cm 8ohm 60W スピーカ WOOFER 10
R50 XI168A00 Speaker 2.5cm 8ohm 60W スピーカ TWEETER 10
R60 V5251300 Circuit Board NW ＮＷシート 08
R61 CB046030 Support, PCB LCBS-04T 基板サポート 4 01
R70 -- Connector Assembly SP-R VH 2P/4P 束線ＳＰ − Ｒ (V525100)
R80 -- Connector Assembly SP-IN VH 4P 束線ＳＰ − ＩＮ (V525110)
R90 -- Speaker Angle Bracket A ＳＰアングル金具Ａ (V525140)
R93 -- Speaker Caution Seal GP E+J N コーションシールＮ (V632620)
R31G -- Felt GP 吸音材ＧＰ (V578890)
R41G VT301800 Packing W パッキン（Ｗ） 03
R42G WF109500 Bind Head Tapping Screw-1 4.0X16 MFZN2W3 ＴＰ＃１＋ＢＩＮＤ 4 01
R51G WF109500 Bind Head Tapping Screw-1 4.0X16 MFZN2W3 ＴＰ＃１＋ＢＩＮＤ 4 01
R71G CB070450 Cord Binder L=100 束線止め 2 01
R81G CB070450 Cord Binder L=100 束線止め 2 01
R91G WF694700 Nut B 4.0X9.5 MFZN2W3 鬼目ナット 4
R92G WF456600 Bind Head Screw 4.0X12 MFZN2B3 小ネジ＋ＢＩＮＤ 4 01
13
DGC1B
14
Top view
KEY DRIVE UNIT

221G 500 221G 510 221G 500 510 500 221G 510 520 500 221G
381G 420 410 410 400 430 381G
380 250 100 230 120 230 220 130 340 240 380
105 530 390a 110 540 530 540 530 540 130 550 530
Front view
140
Bottom view 370

U, A, APTW, APTH,
APHK models 370a
351 150 151G 152 371G 160 331G 350 170 370 370a 371G 180
390 390a 390b 331G
Side view
211G
550 210
101G
540
530 141G
520
200
510
500
190
DGC1B

KEY DRIVE UNIT キードライブユニット DGC1B
V5788300 Key Drive Unit Black GA1 UL キードライブユニット 83
100 -- Upper Yoke C3LF 上部ヨーク (V524220)
105 -- Upper Yoke C3LB 上部ヨーク (V578850)
110 -- Upper Yoke C3CF 上部ヨーク (V524360)
120 -- Upper Yoke C3CB 上部ヨーク (V524370)
130 -- Upper Yoke C3R 上部ヨーク (V524380) 2
140 -- Lower Yoke C3 下部ヨーク (V524470)
150 -- Yoke Cover Black GHA ヨークカバー (V578860)
152 -- Label Ｆコントロールラベル (VP49650)
160 -- Yoke Cover 3B ヨークカバー (V524500)
170 -- Yoke Cover 3C ヨークカバー (V524510)
180 -- Yoke Cover 3D ヨークカバー (V524520)
190 -- Side Rail C3 サイドレール (V524570)
200 -- Circuit Board Case C3 シートケース (V524580)
210 VP166900 Connector Case コネクターケース 05
220 V5202200 Circuit Board PK-CTL ＰＫ−ＣＴＬシート 44
230 VN588200 Circuit Board DRIVE A ドライブＡシート 2 19
240 VN588300 Circuit Board DRIVE B ドライブＢシート 19
250 VN588400 Circuit Board DRIVE C ドライブＣシート 19
260 -- Connector Assembly GKD-A2 F2 KRD 16P 束線ＧＫＤ−Ａ２ (VP56470)
270 -- Connector Assembly GKD-B PH 14P 束線ＧＫＤ − Ｂ (VP16710)
280 -- Connector Assembly GKD-C PHR-3P/4P 束線ＧＫＤ − Ｃ (VP16720)
290 -- Connector Assembly GKD-D XH 3P 束線ＧＫＤ − Ｄ (VP16730)
300 -- Connector Assembly GKD-E XH 3P 束線ＧＫＤ − Ｅ (VP16740)
310 -- Connector Assembly GKD-F 8P/10P 束線ＧＫＤ − Ｆ (VP16750)
320 -- Connector Assembly GKD-G PH/DF1B 9P 束線ＧＫＤ − Ｇ (VP16760)
330 VP167700 Connector Assembly GKD-H 3P/6P/7P/16P 束線ＧＫＤ − Ｈ 18
330a VC362700 Ferrite Core FR25/15/12-1400L フェライトコア 2 04
340 VP603700 Bushing KG-024L 自在ブッシュ 01
350 -- Hole Cover Black 120 ホールカバー１２０ (V622090)
351 -- Hole Cover Black 120 ホールカバー１２０ (V622090)
370 VP167900 Thermostat Assembly GP KD TH PH 2P サーモスタットＡｓｓ ' ｙ 2 08
370a VG927300 Thermostat サーモスタット Key drive 2 04
380 -- Side Angle Bracket サイドアングル (V524740) 2
390 VP169000 Phone Jack Assembly PHR-3P/PHR-4P ホーンジャックＡｓｓ ' ｙ 08
390a VT836600 Circuit Board CTRL G ＣＴＲＬＧシート 08
390b VC362700 Ferrite Core FR25/15/12-1400L フェライトコア 04
400 -- Insulation Form PK 絶縁フォームＰＫ (VP16910)
410 -- Insulation Form A 絶縁フォームＡ (VP16920) 2
420 -- Insulation Form B 絶縁フォームＢ (VP16930)
430 -- Insulation Form C 絶縁フォームＣ (VP16950)
500 -- Coil Assembly WY95F FRONT コイルＡｓｓ ' ｙ White, Yellow (V524600) 30
510 -- Coil Assembly WG165F FRONT コイルＡｓｓ ' ｙ White, Green (V524610) 11
520 V5246200 Coil Assembly WB210F FRONT コイルＡｓｓ ' ｙ White, Black 3 06
530 -- Coil Assembly WY95B REAR コイルＡｓｓ ' ｙ White, Yellow (V524630) 32
540 -- Coil Assembly WG165B REAR コイルＡｓｓ ' ｙ White, Green (V524640) 10
550 V5246500 Coil Assembly WB210B REAR コイルＡｓｓ ' ｙ White, Black 2 06
* 101G WG489900 Cap Screw 4.0X40 MFZN2W3 六角穴付ボルト 32
151G WE878400 Bind Head Screw 4.0X6 MFZN2B3 小ネジ＋ＢＩＮＤ 22 01
* 211G WG489800 Cap Screw 4.0X30 MFZN2W3 六角穴付ボルト 2
221G WE980200 Bind Head Tapping Screw-S 3.0X5 MFZN2W3 Ｓタイト＋ＢＩＮＤ 13
371G -- Adhesive Tape 両面粘着テープ (VP55650) 2
15
DGC1B
PEDAL DRIVE UNIT
53
32 07G
6 31
9 32
07G
9 31 12G
08G 6
10
43
08G 45
37 45 43
21
22G
20G
38
41G
2 19 20G 14G
44 40G 45G
30 35G 38
42G 19
32 52G
16G 31 46G
11
23 5
55G 12G
35G
4
15
24G
56
55G
17 34
1
16G 58
16G 33 46 14G
46
03G
33
16G 13G
29
26 28
27G
16
DGC1B

PEDAL DRIVE UNIT Ｐ．ドライブユニット DGC1B
VP191600 Pedal Drive Unit Black Ｐ．ドライブユニット 69
1 VP186200 Loud Solenoid Assembly MD-2008YA ラウドソレノイドＡｓｓｙ 28
2 VP186300 Shift Solenoid Assembly MD-2008YB シフトソレノイドＡｓｓｙ 28
4 -- Inner Bracket L インナーブラケットＬ (VP18650)
5 -- Inner Bracket S インナーブラケットＳ (VP18660)
6 VP186700 Block GP 固定ブロック 2 05
9 VP186900 Gray Scale Holder グレースケール押さえ 2 04
10 VP187400 Top Cover トップカバー 09
11 VP187600 Bottom Cover ボトムカバー 09
15 VP188000 Pedal Base Plate ペダルベースプレート 10
17 VP910100 Pedal Rear Cover Black ペダルリヤカバー黒 05
19 -- Guide Angle ガイドアングル (VP18860) 2
21 -- Guide Roller ガイドローラー (VP18880) 4
23 -- Sostenuto Bracket ＳＯＳＴＥブラケット (VP18910)
26 VP189500 Sostenuto Ring ソステヌートリング 06
28 VP189700 Rod Assembly White LEFT,RIGHT 突き上げ棒ＬＲＡｓｓｙ 2 15
29 VP189900 Sostenuto Rod White ソステヌートロット 07
30 VH166900 Nut 袋ナット 05
31 VH167000 Rod Nut 突き上げ棒ナット 3 05
32 VH167100 Packing パッキング 3 03
33 VH167000 Rod Nut 突き上げ棒ナット 2 05
34 VP188700 Circuit Board PEDAL DRIVE Ｐドライブシート 15
37 VP188900 Connector Assembly GPD 3P/5P/6P/16P 束線 19
38 VP359500 Nylon Clamp Black NK-6N ナイロンクランプ 3 01
43 VP186400 Damper Stopper ダンパー止メ 2 03
44 VB582500 Cord Binder #04054 S-72B-E 束線止め 4 01
45 CX559100 Bearing B 軸受け B 4 03
46 CX559090 Bearing A 軸受け A 4 03
53 VH166900 Nut 袋ナット 2 05
56 VR245400 Sostenute Cloth L HQG (GP-PP) ソステヌートクロスＬ 2 02
58 -- Insulation Form PD GP 絶縁フォームＰＤ (V529190)
03G WF105800 Bind Head Screw 4.0X6 MFZN2W3 小ネジ＋ＢＩＮＤ 8 01
* 07G WF305600 Bind Head Tapping Screw-P 3.0X6 MFZN2B3 Ｐタイト＋ＢＩＮＤ 4
08G VP033600 Gray Scale GP グレースケールＧＰ 2 06
16G WE965300 Truss Head Tapping Screw-1 4.0X20 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 4 01
20G WF105800 Bind Head Screw 4.0X6 MFZN2W3 小ネジ＋ＢＩＮＤ 4 01
* 22G WE987200 Bind Head Screw 3.0X8 MFZN2W3 小ネジ＋ＢＩＮＤ 4
* 27G WF305600 Bind Head Tapping Screw-P 3.0X6 MFZN2B3 Ｐタイト＋ＢＩＮＤ 2
35G WE980200 Bind Head Tapping Screw-S 3.0X5 MFZN2W3 Ｓタイト＋ＢＩＮＤ 3
41G WE965200 Truss Head Tapping Screw-1 4.0X12 MFZN2B3 ＴＰ＃１＋ＴＲＵＳ 2 01
42G WF556500 Flat Washer 4.0X10X0.8 MFZN2B3 平座みがき丸 4 01
* 45G WG488000 Bind Head Screw 4.0X4 MFZN2B3 小ネジ＋ＢＩＮＤ
* 46G WF567200 Toothed Lock Washer-A 4.0 MFZN2W3 歯付座金内歯 3
52G WE878400 Bind Head Screw 4.0X6 MFZN2B3 小ネジ＋ＢＩＮＤ 01
* 55G WG486700 Bind Head Tapping Screw-S 3.0X6 MFZN2B3 IT Ｓタイト＋ＢＩＮＤ 2
17
DGC1B
KEY SENSOR UNIT
Rear view
A
90 51G
100
30 96G 31G 70
TOP view
Unit type stamp
A view
95G 90 40 92 96G
91 30
90
51G 60
50 62G 61G

KEY SENSOR UNIT キーセンサユニット DGC1B
* WJ030900 Key Sensor Unit GEK2(KS1) キーセンサユニット
30 -- Key Sensor Bracket GPS R C3 ＫＳブラケット (WH38420)
40 -- Sensor Head GS UPS センサーヘッドＧＳ (V797750) 89
50 -- Plug AS 1.2mm センサープラグＡＳ (V708030)
60 VN371200 Optical Fiber 0 0.5 光ファイバー素材 52 01
* 70 WJ031000 Circuit Board KEY SENSOR シート分割Ｋセンサー (V858590)
90 -- Key Sensor Stay B ＫセンサステーＢ (WG12620) 4
91 -- Key Sensor Holder GP Ｋセンサー台 (WC87070) 4
92 -- Height Adjustment Spring SS 高さ調整バネＳＳ (WD19500) 8
100 VZ141800 Connector Assembly SENSOR C3 10P 束線ＳＮＳＲＣ３ 10
31G WG526800 Adhesive Tape 15X30 アセテートクロス粘着 01
51G WG242400 Bind Head Tapping Screw-S 3.0X4 MFZN2W3 Ｓタイト＋ＢＩＮＤ 2
61G -- String, Fiber 束線糸 (VP20580)
62G -- String, Fiber 束線糸 (VP20580)
95G WG489300 Flat Head Screw 3.0X18 MZFN2W3 小ネジ＋ＦＬＡＴ 8
96G WG484100 Pan Washer Head Screw 3.0X5 MFZN2W3 ＋ＰＷＨ小ネジ 16 01
18
DGC1B
MA120 ASSEMBLY
Top view
2 3 2 2 2
1 1 7
Front view
4 5 4 6

MA120 ASSEMBLY ＭＡ１２０Ａｓｓ ' ｙ DGC1B
VT492000 MA120 Assembly J,U ＭＡ１２０Ａｓｓ ' ｙ 23
1 WE974600 Bind Head Tapping Screw-B 4.0X8 MFZN2W3 Ｂタイト＋ＢＩＮＤ 5 01
2 WE774200 Bind Head Tapping Screw-B 3.0X10 MFZN2W3 Ｂタイト＋ＢＩＮＤ 4 01
3 WE973400 Bind Head Tapping Screw-B 3.0X16 MFZN2W3 Ｂタイト＋ＢＩＮＤ 01
4 VT461100 Transistor Holder A トランジスターホルダーＡ 4 03
5 VT461200 Transistor Holder B トランジスターホルダーＢ 03
6 VT444300 Heat Sink 放熱器 11
7 VT143200 Circuit Board MA120 ＭＡ１２０シート 20
19
DGC1B
ELECTRICAL PARTS
ATAPI and CD PANEL and CONTROLLER
ELECTRICAL PARTS 電気部品 DGC1B
V5255500 Circuit Board ATAPI (DA) シートＡＴＡＰＩ (V578320)(XY021A0) 17
* WG917800 Circuit Board CD PANEL シートＣＤパネル (WG91760,X7437A0,XY109C0)
* WJ089800 Circuit Board CONTROLLER (CTRL) コントローラシート (WJ09060)(X7372A0)
VT836600 Circuit Board CTRL G ＣＴＲＬＧシート (VT83570)(XR147A0) 08
V3069000 Circuit Board DB ＤＢシート (V263610)(XV176C0) 23
VN588200 Circuit Board DRIVE A ドライブＡシート (VN94030)(XL114D0) 19
VN588300 Circuit Board DRIVE B ドライブＢシート (VN94030)(XL114D0) 19
VN588400 Circuit Board DRIVE C ドライブＣシート (VN94030)(XL114D0) 19
V5254300 Circuit Board DSP シートＤＳＰ (XW912A0) 45
-- Circuit Board FU ＦＵシート (V525850)(XY228B0)
* WG546100 Circuit Board JACK1 ＪＡＣＫ１シート (X7379A0)
* WJ031000 Circuit Board KEY SENSOR シート分割Ｋセンサー (V858590)(X2329B0)
VT143200 Circuit Board MA120 ＭＡ１２０シート (VT14340)(XQ393H0) 20
V5908900 Circuit Board MN ＭＮシート (XY932A0) 48
* WG000600 Circuit Board NF ＮＦシート (X6968A0)
V5251300 Circuit Board NW ＮＷシート (XU777A0) 08
V3795900 Circuit Board PASW ＰＡＳＷシート (V378990)(XV883A0) 14
VP188700 Circuit Board PEDAL DRIVE Ｐドライブシート (VP49770)(XL479E0) 15
V5202200 Circuit Board PK-CTL ＰＫ−ＣＴＬシート (V520210)(XY168C0) 44
VN543300 Circuit Board PWB ＰＷＢパワー (XL056D0)
-- DB Unit J UC ＤＢユニット (VN81290)
-- HIC Unit J EX ＨＩＣユニット (VN81310)
-- DI Unit J EX ＤＩユニット (VN81320)
-- PW Unit J EX ＰＷユニット (VN81330)
V5255500 Circuit Board ATAPI (DA) シートＡＴＡＰＩ (V578320)(XY021A0) 17

CN001 V5789200 Connector KX14-50K5F1-E1000E 基板対基板接続コネクタ 05
CN002 V4776400 Connector, FFC/FPC 52808-3070TP 30P ＦＦＣ／ＦＰＣコネクタ 02
* WG917800 Circuit Board CD PANEL シートＣＤパネル (WG91760,X7437A0,XY109C0)

DL VV925900 Diode RLS-73 TE-11 TP ダイオード 01
DR VV925900 Diode RLS-73 TE-11 TP ダイオード 01
* LD1 WG530800 LED Display HDSP-U511 7-seg. ＬＥＤディスプレイ DRIVE
* LD2 WG530800 LED Display HDSP-U511 7-seg. ＬＥＤディスプレイ DRIVE
SWL VV439800 Tact Switch SKQNAJ タクトＳＷ SELECT < 01
SWR VV439800 Tact Switch SKQNAJ タクトＳＷ SELECT > 01
* WJ089800 Circuit Board CONTROLLER (CTRL) コントローラシート (WJ09060)(X7372A0)

C0001 US145100 Ceramic Capacitor-F (chip) 0.1000 25V Z RECT. チップセラ（Ｆ） 01
C0002 US062100 Ceramic Capacitor-SL(chip) 100P 50V J RECT. チップセラ（ＳＬ） 01
C0004 VU377800 Electrolytic Cap. 3300 16.0V TATEJI ケミコン 02
C0006 UR838470 Electrolytic Cap. 470.00 16.0V RX TP ケミコン 01
-0009 US145100 Ceramic Capacitor-F (chip) 0.1000 25V Z RECT. チップセラ（Ｆ） 01
-0016 US062100 Ceramic Capacitor-SL(chip) 100P 50V J RECT. チップセラ（ＳＬ） 01
C0019 UN817470 Electrolytic Cap.-BP 47.00 6.3V RX TP ＢＰケミコン 01
C0023 UI566100 Electrolytic Cap. 1.00 50.0 ケミコン 01
C0026 US061270 Ceramic Capacitor-CH(chip) 27P 50V J RECT. チップセラ（ＣＨ） 01
C0036 VU544900 Super Capacitor 1F5.5V EECS5R5H105 スーパーキャパシタ 05
20
DGC1B
CONTROLLER
C0067 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
CN001 VY638000 D-Sub Connector KHEY-15S-1A3G SE Ｄ−Ｓｕｂコネクタ TO CONTROL CABLE FOR PIANO 05
CN002 VB390600 Base Post Connector PH 10P TE ベースポスト 01
CN003 VJ264900 Jumper Header RE 3P TE ジャンパーヘッダー 01
CN004 LB919040 Base Post Connector XH 4P SE ベースツキポスト 01
CN005 VK633200 Connector Header HIF3FC-34PA2.54DS コネクタヘッダー 03
CN006 V2731000 Connector, FMN FMN 16P TE ＦＭＮコネクター 02
CN007 V3892800 Connector, FFC 52806-2110 21P TE ＦＦＣコネクター 01
CN008 V4928200 Connector, FFC 52806-1210 12P TE ＦＦＣコネクター 01
CN011 VB858100 Base Post Connector PH 2P SE ベースポスト 01
D0001 VV925900 Diode RLS-73 TE-11 TP ダイオード 01
-0008 VV925900 Diode RLS-73 TE-11 TP ダイオード 01
D0009 V5734900 Diode HSC119 SC79 ダイオード 01
* EM001 WG491900 LC Filter DSS6NF31C223U31A ＬＣフィルター
EWSR VN774800 GND Washer MEP1866 アースワッシャー 2 01
IC001 XS343A00 IC TC74AC14F ＩＣ INVERTER 02
IC003 VR903700 Photo Coupler HCPL-M600-500E フォトカプラ 04
-005 VR903700 Photo Coupler HCPL-M600-500E フォトカプラ 04
IC006 XM967A00 IC UPC24A05HF-AZ ＩＣ REGULATOR +5V 05
IC007 XU147A00 IC HD6417014F28V ＩＣ CPU 09
IC008 XY447A00 IC TC7SU04F ＩＣ INVERTER 01
IC009 XL106A00 IC HD74HC123AFP ＩＣ SINGLE SHOT 02
IC010 XT384A00 IC PST600C-MMP3P ＩＣ SYSTEM RESET 03
IC011 XP446A00 IC HD74AC138FPEL-E ＩＣ DECODER 03
IC012 XS343A00 IC TC74AC14F ＩＣ INVERTER 02
IC013 XU073A00 IC SN75C1168NSR ＩＣ LINE TRANSCEIVER 05
IC015 XV932B00 IC MSM5118160F-60J3R1 ＩＣ DRAM 16M 08
* IC016 X6327A00 IC TC74AC574F(EL) ＩＣ D-FF
IC017 XR771A00 IC TC74AC32F(EL,F) ＩＣ OR 01
* IC018 XY558B00 IC PP-BSL ＩＣ FLASH MEMORY V1.00
* IC020 X7801A00 IC R5F21142SP U0 ＩＣ CPU
IC021 XY348A00 IC MM74HC4040SJX ＩＣ BINARY COUNTER 03
IC023 X2896A00 IC M62320FP ＩＣ I/O EXPANDER 05
IC024 XU401A00 IC RS5C372A-E2 ＩＣ REAL TIME CLOCK 04
IC025 XR771A00 IC TC74AC32F(EL,F) ＩＣ OR 01
IC026 XS345A00 IC M38881M2-062FP ＩＣ SCI 09
* IC027 X8044A00 IC HY27US08121A-TPCB ＩＣ FLASH ROM 512M
IC029 XI939A00 IC HD63266FV ＩＣ FDC 09
* IC031 X6327A00 IC TC74AC574F(EL) ＩＣ D-FF
IC032 XS344A00 IC TC74AC541F ＩＣ BUFFER 04
IC033 VN516800 Transistor Array LB1215-E トランジスタアレイ 03
IC034 VN516900 Transistor Array LB1211-E トランジスタアレイ 03
IC036 IS054100 IC HD74LV541AFPEL-E ＩＣ BUFFER 03
IC037 IS057410 IC SN74LV574ANSR ＩＣ D-FF 02
IC038 XU965A00 IC UPC29M33T-E1 ＩＣ REGULATOR +3.3V 03
IC039 IS054100 IC HD74LV541AFPEL-E ＩＣ BUFFER 03
JK001 VQ098700 DIN Connector 3P YKF51-5057 ＤＩＮコネクタ MIDI IN/OUT 03
JK002 VV269500 DIN Connector DIN 8P MD-S813 複合コネクタ TO HOST 03
21
DGC1B
CONTROLLER
L0001 VT620400 Chip Inductance BLM21AH102SN1D チップインダクタ 01
-0013 VT620400 Chip Inductance BLM21AH102SN1D チップインダクタ 01
R0003 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
-0011 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
R0014 RD356330 Carbon Resistor (chip) 3.3K 63M J RECT. チップ抵抗 01
-0021 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
R0034 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
R0044 RD359100 Carbon Resistor (chip) 1.0M 63M J RECT. チップ抵抗 01
R0103 HF754820 Carbon Resistor 82.0 1/4 J AX TP カーボン抵抗 01
22
DGC1B
CONTROLLER and CTRL G and DB

RA001 RE044220 Resistor Array 22X4 抵抗アレイ 01
-015 RE044220 Resistor Array 22X4 抵抗アレイ 01
SW001 VQ665200 Slide Switch SSSF143400 スライドＳＷ HOST SELECT 03
SW002 VV020300 Tact Switch SKQNAA タクトＳＷ Boot switch 01
SW003 VQ949900 Switch SSGM18 ディップタイプＳＷ Timer adjustment 03
TR001 VV556400 Transistor 2SC2412K Q,R,S TP トランジスタ 01
-007 VV556400 Transistor 2SC2412K Q,R,S TP トランジスタ 01
VR001 VA788000 Trimmer Potentiometer B 10.0K AX 3P RHE 半固定ＶＲ LCD drive 01
X0001 VS486900 Quartz Crystal Unit 8.0MHz SMD-49 水晶振動子 03
X0002 VQ523100 Quartz Crystal Unit 32.768KHz DT-26 水晶振動子 01
* ZD1 VU173800 Zener Diode UDZS33B TE-17 33V ツェナーダイオード
* ZD2 VU173800 Zener Diode UDZS33B TE-17 33V ツェナーダイオード
VT836600 Circuit Board CTRL G ＣＴＲＬＧシート (VT83570)(XR147A0) 08

1 VN638300 Phone Jack HLJ2306-01-3080 ホーンジャック Foot controller 02
2 WA093400 LC Filter ZJSR5101-223TA-01 ＬＣフィルターＥＭＩ 01
3 VB390000 Base Post Connector PH 4P TE ベースポスト 01
5 VF968800 Coil SBT-0260TF RX 60uH コイルＳＢ６０ｕＨ 01
11G WF559900 Hexagonal Nut M12X14X2 P=1.0 ナット特殊 01
V3069000 Circuit Board DB ＤＢシート (V263610)(XV176C0) 23

C1 UB245100 Monolithic Ceramic Cap. F 0.10 25V Z RECT. チップ積層セラコン 01
23
DGC1B
DB
C2 UE027470 Electrolytic Cap. (chip) 47 10V RV2-10V470M チップケミコン 01
-7 UB245100 Monolithic Ceramic Cap. F 0.10 25V Z RECT. チップ積層セラコン 01
C9 UE017470 Electrolytic Cap. (chip) 47 6.3V RV2-6V-470 チップケミコン 01
-22 UE037100 Electrolytic Cap. (chip) 10 16V RV2-16V100M チップケミコン 01
C23 UB013820 Monolithic Ceramic Cap. 8200P 50V K RECT. チップ積層セラコン 01
C27 UB215100 Monolithic Ceramic Cap. B 0.100 25V K RECT チップ積層セラコン 01
C28 UB215100 Monolithic Ceramic Cap. B 0.100 25V K RECT チップ積層セラコン 01
C41 UB051220 Monolithic Ceramic Cap. SL 22P 50V J RECT. チップ積層セラコン 01
CN1 VU341400 Straight Connector CL616 26P TE ストレートコネクター 03
CN2 V3060000 Connector, FF FF 5P SE ＦＦコネクタ 01
D1 VS201100 Diode D1F60 1A 600V TP ダイオード 01
D2 VS201100 Diode D1F60 1A 600V TP ダイオード 01
IC1 X0088B00 IC K6R1016C1D-JC12T ＩＣ  SRAM 1M

IC1 X3849A00 IC K6R1016C1D-JC10 ＩＣ 

IC1 XV729A00 IC IDT71016S15YG8 ＩＣ  09

IC1 XV730A00 IC W26010AJ-15 ＩＣ  09

IC1 XZ628A00 IC CY7C1021-15VC ＩＣ  07

IC1 XZ635A00 IC IC61C6416-15K ＩＣ  07

IC1 XZ965A00 IC K6R1016C1C-JC15T00 ＩＣ  08

* IC1 X8444A00 IC IS61C6416AL-12KLI ＩＣ 
IC2 XU965A00 IC UPC29M33T-E1 ＩＣ REGULATOR +3.3V 03
IC3 X4458A00 IC UPC29M05AT-E1-AZ ＩＣ REGULATOR +5V 03
IC4 XP867A00 IC UPD63200GS-E1-A ＩＣ DAC 07
IC5 XU947C00 IC HG73C205AFDV ＩＣ SWX00B 09
IC6 XV721B00 IC MX23C3210TC-10 ＩＣ  MASK ROM 32M 09

IC6 XV721C00 IC MX23C3210TC-10G ＩＣ  07
IC7 X3852A00 IC NJM2115M-TE1 ＩＣ  OP AMP 01

IC7 XS511A00 IC NJM2115M-T1 ＩＣ  02
R1 RD257100 Carbon Resistor (chip) 10.0K 0.1 J RECT. チップ抵抗 01
24
DGC1B
DB and DRIVE A and DRIVE B

R27 RD255330 Carbon Resistor (chip) 330.0 0.1 J RECT. チップ抵抗 01
X1 VZ703600 Quartz Crystal Unit 8.4672MHzSMD-49 TP 水晶振動子 03
VN588200 Circuit Board DRIVE A ドライブＡシート (VN94030)(XL114D0) 19

C1 UI538100 Electrolytic Cap. 100.00 16.0V ケミコン 01
C3 VN715400 Mylar Capacitor 0.1000 250V K TP マイラーコン 01
-5 VN715400 Mylar Capacitor 0.1000 250V K TP マイラーコン 01
CN2 VC014700 Connector Base Post EH 3P TE コネクタベースポスト 01
-33 VC014700 Connector Base Post EH 3P TE コネクタベースポスト 01
CN34 LB918030 Base Post Connector XH 3P TE ベースツキポスト 01
CN37 VF283400 Base Post Connector PH 16P TE ベースポスト 01
D1 WB880800 Diode 10EDA40-TA2B5 52 ダイオード 01
-32 WB880800 Diode 10EDA40-TA2B5 52 ダイオード 01
D33 VN517300 Diode D1NL20U4060 1A200V ダイオード 01
-64 VN517300 Diode D1NL20U4060 1A200V ダイオード 01
EMI1 WA093400 LC Filter ZJSR5101-223TA-01 ＬＣフィルターＥＭＩ 01
IC1 XL150A00 IC YM3421-FZ ＩＣ PWM GENERATOR 09
-19 RD256330 Carbon Resistor (chip) 3.3K 0.1 J RECT. チップ抵抗 01
* TA1 WG226700 Transistor Array STA404A トランジスタアレイ
* -8 WG226700 Transistor Array STA404A トランジスタアレイ
VN588300 Circuit Board DRIVE B ドライブＢシート (VN94030)(XL114D0) 19

C106 UB012220 Monolithic Ceramic Cap. B 220P 50V K RECT. チップ積層セラコン  01

-108 UB012220 Monolithic Ceramic Cap. B 220P 50V K RECT. チップ積層セラコン  01

C106 UB052220 Monolithic Ceramic Cap. 220P 50V J RECT. チップ積層セラコン  01

-108 UB052220 Monolithic Ceramic Cap. 220P 50V J RECT. チップ積層セラコン  01
CN115 VE352600 Base Post Connector PH 14P TE ベースポスト 01
25
DGC1B
DRIVE B and DRIVE C and DSP

IC101 XL150A00 IC YM3421-FZ ＩＣ PWM GENERATOR 09
VN588400 Circuit Board DRIVE C ドライブＣシート (VN94030)(XL114D0) 19

CN201 VE352600 Base Post Connector PH 14P TE ベースポスト 01
V5254300 Circuit Board DSP シートＤＳＰ (XW912A0) 45

* 1G WF104400 Pan Head Screw 3.0X8 MFZN2W3 小ネジ＋ＰＡＮ
2G ES200060 Hexagonal Nut #1 3.0 MFZN2Y 六角ナット 01
4G -- Wire Black AWG24 1061 AWG ビニール線．クロ (V613430)
C0002 UB052330 Monolithic Ceramic Cap. 330P 50V J RECT. チップ積層セラコン 01
C100 FG651680 Ceramic Capacitor-SL 68P 50V J RX TP セラコン（ＳＬ） 01
C01V1 UF066100 Electrolytic Cap. (chip) 1 50V チップケミコン 01
C01V2 UF018100 Electrolytic Cap. (chip) 100 6.3V チップケミコン 01
C01V4 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
C03V2 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
-03V5 UF018100 Electrolytic Cap. (chip) 100 6.3V チップケミコン 01
CAD09 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CAD11 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
CADL4 US063150 Ceramic Capacitor-B (chip) 1500P 50V K RECT. チップセラ（Ｂ） 01
CADR2 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CADR3 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
CADR4 US063150 Ceramic Capacitor-B (chip) 1500P 50V K RECT. チップセラ（Ｂ） 01
CADR5 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CAT01 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CB001 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CB002 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CCDL1 UF237220 Electrolytic Cap.-BP(chip) 22 16V UWP チップＢＰコン 01
CCDR1 UF237220 Electrolytic Cap.-BP(chip) 22 16V UWP チップＢＰコン 01
CD001 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
-D012 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CDAOU US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CDEF1 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CF001 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CMA01 UF237220 Electrolytic Cap.-BP(chip) 22 16V UWP チップＢＰコン 01
26
DGC1B
DSP
CMA02 UF237220 Electrolytic Cap.-BP(chip) 22 16V UWP チップＢＰコン 01
CMI01 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CMUL1 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CNA01 V4776400 Connector, FFC/FPC 52808-3070TP 30P ＦＦＣ／ＦＰＣコネクタ 02
CNA02 V4776500 Connector, FFC/FPC 52808-2570TP 25P ＦＦＣ／ＦＰＣコネクタ 01
CNRCA V5715200 Pin Connector RD/WH YKC21-4206N ピンコネクタ AUDIO/ANALOG MIDI IN 02
CNSWP V5259200 DIN Connector MD-S6000-90 複合コネクタ CD CONTROL 02
CP001 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
-P004 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CRS01 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CRST1 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
CRST2 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CS001 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CS002 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CX001 US061180 Ceramic Capacitor-CH(chip) 18P 50V J RECT. チップセラ（ＣＨ） 01
CX002 US061180 Ceramic Capacitor-CH(chip) 18P 50V J RECT. チップセラ（ＣＨ） 01
CX003 FG651390 Ceramic Capacitor-SL 39P 50V J RX TP セラコン（ＳＬ） 01
CXL01 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
DMI01 VV925900 Diode RLS-73 TE-11 TP ダイオード 01
IC001 XW685A00 IC TMS320VC5402 ＩＣ DSP 10
IC002 XT802A00 IC AK4520AVF-E2 ＩＣ ADC/DAC 07
IC003 XS790A00 IC TC74HC4052AF(EL,F) ＩＣ MULTIPLEXER 02
IC010 XY051B00 IC MBM29F400BC-70PFTN ＩＣ FLASH MEMORY 10
IC011 XL122A00 IC PST572CMT-R ＩＣ SYSTEM RESET 02
IC012 XP154A00 IC M5237ML ＩＣ REGULATOR +3.3V 02
* IC015 XW774E00 IC XC9572XL-10VQG64C ＩＣ PLD
* IC016 X7702A00 IC IS61LV6416-10TL ＩＣ SRAM 1M
IC017 XW148A00 IC HD74LVC245A ＩＣ TRANSCEIVER 02
IC018 XW148A00 IC HD74LVC245A ＩＣ TRANSCEIVER 02
IC019 V9924900 Photo Coupler PC410L0NIP フォトカプラ 03
IC021 XT617A00 IC NJM2112V(TE2) ＩＣ OP AMP 03
IC022 XT617A00 IC NJM2112V(TE2) ＩＣ OP AMP 03
IC023 XW905A00 IC HD74LVC04FP ＩＣ INVERTER 01
IC024 XY751A00 IC HD74LVC14FP ＩＣ INVERTER 02
R01V1 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
R01V2 RD356200 Carbon Resistor (chip) 2.0K 63M J RECT. チップ抵抗 01
R03V1 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
R03V4 RD250000 Carbon Resistor (chip) 0.0 0.0 J RECT. チップ抵抗 01
R03V5 RD250000 Carbon Resistor (chip) 0.0 0.0 J RECT. チップ抵抗 01
R0559 HF855270 Carbon Resistor 270.0 1/4 J ST カーボン抵抗 01
R0560 HF855220 Carbon Resistor 220.0 1/4 J ST カーボン抵抗 01
R16P0 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
R5INT RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
R5IOR RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RAD09 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RAD10 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RADL1 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RADL5 RD355330 Carbon Resistor (chip) 330.0 63M J RECT. チップ抵抗 01
RADL9 RD355330 Carbon Resistor (chip) 330.0 63M J RECT. チップ抵抗 01
RADM0 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RADPW RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RADR1 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
27
DGC1B
DSP
RADR5 RD355330 Carbon Resistor (chip) 330.0 63M J RECT. チップ抵抗 01
RADR8 RD355330 Carbon Resistor (chip) 330.0 63M J RECT. チップ抵抗 01
RAT01 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RB000 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-B015 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RBCL0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RBFD0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RCDL1 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RCDL2 RD356360 Carbon Resistor (chip) 3.6K 63M J RECT. チップ抵抗 01
RCDR1 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RCDR2 RD356360 Carbon Resistor (chip) 3.6K 63M J RECT. チップ抵抗 01
RCLKO RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RCLR1 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RCLR2 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RCM01 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RCM02 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RDAPW RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDAQ0 RD356560 Carbon Resistor (chip) 5.6K 63M J RECT. チップ抵抗 01
RDBIO RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDCM2 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDCM4 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDCM6 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDD00 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-DD15 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RDDS0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDE10 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
-DE12 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDEF1 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDEF2 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDEF3 RD155150 Carbon Resistor (chip) 150.0 1/4 J TP チップ抵抗
RDEF5 RD155150 Carbon Resistor (chip) 150.0 1/4 J TP チップ抵抗
RDEF7 RD255150 Carbon Resistor (chip) 150.0 0.1 J RECT. チップ抵抗 01
RDEF8 RD255150 Carbon Resistor (chip) 150.0 0.1 J RECT. チップ抵抗 01
RDEF9 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDIO0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDIS0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDM02 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDMS0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDNM0 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDPS0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDRDY RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDRW0 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDS01 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDS02 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RDS03 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RDSA0 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-DSA9 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RDSAA RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-DSAJ RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
REMU0 RD356470 Carbon Resistor (chip) 4.7K 63M J RECT. チップ抵抗 01
REMU1 RD356470 Carbon Resistor (chip) 4.7K 63M J RECT. チップ抵抗 01
RF001 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RGND2 RD250000 Carbon Resistor (chip) 0.0 0.0 J RECT. チップ抵抗 01
RHLD0 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RJT01 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
-JT03 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RMI01 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
RMI03 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
RNO01 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
-NO07 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
28
DGC1B
DSP and FU and JACK1

RPD01 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
-PD10 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RPR01 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
RPTDI RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RPTDO RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RRES1 RD355680 Carbon Resistor (chip) 680.0 63M J RECT. チップ抵抗 01
RRES2 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RRST2 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RRST3 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
RRST4 RD355470 Carbon Resistor (chip) 470.0 63M J RECT. チップ抵抗 01
RSCLK RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RSDA0 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RSDTO RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
RSLR0 RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RSWOU RD354820 Carbon Resistor (chip) 82.0 63M J RECT. チップ抵抗 01
RT000 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
RT001 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
RVD00 RD253470 Carbon Resistor (chip) 4.7 0.1 J RECT. チップ抵抗 01
RX001 RD359100 Carbon Resistor (chip) 1.0M 63M J RECT. チップ抵抗 01
RX002 RD355220 Carbon Resistor (chip) 220.0 63M J RECT. チップ抵抗 01
SHIGE VV020300 Tact Switch SKQNAA タクトＳＷ RESET 01
TR001 VJ828100 Transistor 2SA1451A-O,Y(F)O.Y トランジスタ 04
TR002 VV556500 Transistor 2SA1037AK Q,R,S TP トランジスタ 01
XTAL1 VP864800 Quartz Crystal Unit 11.2896MHz SMD-49 水晶振動子 04
-- Circuit Board FU ＦＵシート (V525850)(XY228B0)


C2 FI383470 Capacitor 4700P 400V U.C.S.V 規格認定コン  01
-4 FI383470 Capacitor 4700P 400V U.C.S.V 規格認定コン  01

C2 V7683000 Capacitor 4700P 250V J.U.C.S 規格認定コンＫＨ  01

-4 V7683000 Capacitor 4700P 250V J.U.C.S 規格認定コンＫＨ  01
CN2 LB932060 Base Post Connector VH 6P TE ベースポスト 01
CN-FU LB201530 Fuse Holder PIN TYPE PC-FH1 ヒューズホルダ 2 01
D1 VB941200 Diode 1SS133,1SS176 TE ダイオード 01
F1 KB003630 Fuse 5.00A JU 125V ヒューズ 01
G-J -- Jumper Wire L=20.0mm ジャンパー線 (VY94720)
L3 VF790900 Coil SU10V-D20010 10uH コイル１０Ｕ 03
RY1 V5974200 Relay DC FTR-H2AL005T リレー  03

RY1 V5990700 Relay DC FTR-F2AL005T リレー 
* WG546100 Circuit Board JACK1 ＪＡＣＫ１シート (X7379A0)

-- Jumper Wire 0.55 ジャンパー線 (VD04170)
C001 FG644100 Ceramic Capacitor-F 0.0100 50V Z RX TP セラコン（Ｆ） 01
C002 VC694800 Semiconductive Cera. Cap. 0.1000 25V Z TATET 半導体セラコン 01
C019 FG612390 Ceramic Capacitor-B 390P 50V K RX TP セラコン（Ｂ） 01
29
DGC1B
JACK1
C029 VE326000 Monolithic Mylar Capacitor 0.10 50V J RX TP 積層マイラーコン 01
C030 VE326000 Monolithic Mylar Capacitor 0.10 50V J RX TP 積層マイラーコン 01
C031 UA352470 Mylar Capacitor 470P 50V J RX TP マイラーコン 01
C032 UA354220 Mylar Capacitor 0.0220 50V J RX TP マイラーコン
C033 UA354220 Mylar Capacitor 0.0220 50V J RX TP マイラーコン
C034 UA352470 Mylar Capacitor 470P 50V J RX TP マイラーコン 01
C035 UA354820 Mylar Capacitor 0.082 50V J RX TP マイラーコン 01
* C036 WG760600 Monolithic Mylar Capacitor 2.7 50V J TP 積層マイラーコン
* C037 WG760600 Monolithic Mylar Capacitor 2.7 50V J TP 積層マイラーコン
C039 UA353150 Mylar Capacitor 1500P 50V J RX TP マイラーコン
C042 UA353150 Mylar Capacitor 1500P 50V J RX TP マイラーコン
CN007 LB933040 Base Post Connector VH 4P SE ベースポスト 01
CN008 LB933080 Base Post Connector VH 8P SE ベースポスト 01
IC01 XB247A00 IC UPC4570HA-A ＩＣ OP AMP 02
IC02 XB247A00 IC UPC4570HA-A ＩＣ OP AMP 02
IC03 XC520A00 IC UPC4570C-A ＩＣ OP AMP 01
-06 XC520A00 IC UPC4570C-A ＩＣ OP AMP 01
IC07 XM804A00 IC LA6517-E ＩＣ OPERATIONAL POWER AMP 04
JK05 VS115400 Phone Jack Black LGR4609-7100F ホーンコネクタ（黒） AUX IN L/L+R 01
JK06 VS115400 Phone Jack Black LGR4609-7100F ホーンコネクタ（黒） AUX IN R 01
JK07 VS115400 Phone Jack Black LGR4609-7100F ホーンコネクタ（黒） AUX OUT L/L+R 01
JK08 VS115400 Phone Jack Black LGR4609-7100F ホーンコネクタ（黒） AUX OUT 01
L001 VF456600 Coil SBT-0180W RX 80uH コイル８０Ｕ 03
-004 VF456600 Coil SBT-0180W RX 80uH コイル８０Ｕ 03
R001 HF757220 Carbon Resistor 22.0K 1/4 J AX TP カーボン抵抗 01
-004 HF757220 Carbon Resistor 22.0K 1/4 J AX TP カーボン抵抗 01
30
DGC1B
JACK1 and KEY SENSOR

RY01 VL406800 Relay G5V-2A DC12V リレー１２Ｖ  05

RY01 VR745400 Relay DC G5V-2-H1 12V リレー１２Ｖ  04
TR01 IC1815M0 Transistor 2SC1815 Y,GR TP トランジスタ 01
VR01 VQ862900 Rotary Variable Resistor A 10.0K RK0971210 二連ロータリーＶＲ VOLUME 04
VR02 V4857800 Rotary Variable Resistor 100KB RK09712 PP 二連ロータリーＶＲ BASS 04
VR03 V4857800 Rotary Variable Resistor 100KB RK09712 PP 二連ロータリーＶＲ TREBLE 04
WIRE1 VG925900 Cable, Earth GND L=100mm アース束線１００ｍｍ 03
* WJ031000 Circuit Board KEY SENSOR シート分割Ｋセンサー (V858590)(X2329B0)

-0011 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
-0018 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
C0019 UR839100 Electrolytic Cap. 1000 16.0V RX TP ケミコン 01
CA000 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
-A013 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
CAN00 US062470 Ceramic Capacitor-SL(chip) 470P 50V J RECT. チップセラ（ＳＬ） 01
CAN01 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
CCN00 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
-CN04 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
CCP01 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CCP02 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CCP04 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
CCP05 UF066100 Electrolytic Cap. (chip) 1 50V チップケミコン 01
CCRS1 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
CFT01 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
CFT02 US063100 Ceramic Capacitor-B (chip) 1000P 50V K RECT. チップセラ（Ｂ） 01
CH000 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
-H009 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
CHC14 US135100 Ceramic Capacitor-F (chip) 0.1000 16V Z RECT. チップセラ（Ｆ） 01
CK000 US062100 Ceramic Capacitor-SL(chip) 100P 50V J RECT. チップセラ（ＳＬ） 01
-K013 US062100 Ceramic Capacitor-SL(chip) 100P 50V J RECT. チップセラ（ＳＬ） 01
CM001 US061470 Ceramic Capacitor-CH(chip) 47P 50V J RECT. チップセラ（ＣＨ） 01
-M004 US061470 Ceramic Capacitor-CH(chip) 47P 50V J RECT. チップセラ（ＣＨ） 01
31
DGC1B
KEY SENSOR
CN001 VB858900 Base Post Connector PH 10P SE ベースポスト 01
CNH01 VR623200 Connector Header 20 HIF3FC-20PA-2.5 コネクタヘッダー 03
CPD01 UF018100 Electrolytic Cap. (chip) 100 6.3V チップケミコン 01
CPD02 UF018100 Electrolytic Cap. (chip) 100 6.3V チップケミコン 01
CS001 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
CV000 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
CV001 US062120 Ceramic Capacitor-SL(chip) 120P 50V J RECT. チップセラ（ＳＬ） 01
FL001 VR243700 Chip Inductance 56U LEM2520 T 560J 巻線チップインダクタ 01
-004 VR243700 Chip Inductance 56U LEM2520 T 560J 巻線チップインダクタ 01
FT001 VZ427900 FET 2SJ278MYTR-E ＦＥＴ 01
FT002 VZ427900 FET 2SJ278MYTR-E ＦＥＴ 01
CPU1 X2690A00 IC HD64F2128F16 ＩＣ CPU (FLASH) 12
IC004 XT384A00 IC PST600C-MMP3P ＩＣ SYSTEM RESET 03
IC006 XW104A00 IC MM74HC14SJX_NL ＩＣ INVERTER 01
LD000 VU087300 LED KR3308S ＬＥＤ 02
-011 VU087300 LED KR3308S ＬＥＤ 02
OP001 X2869A00 IC HA1630Q04T 4CH ＩＣ OP AMP 03
OP002 X2869A00 IC HA1630Q04T 4CH ＩＣ OP AMP 03
PC080 VN406200 Photo Coupler HCPL-0600-500 フォトカプラ 05
PD000 VB434400 Photo Diode S2506-02 シリコンフォトダイオード 03
-007 VB434400 Photo Diode S2506-02 シリコンフォトダイオード 03
Q0080 VV556400 Transistor 2SC2412K Q,R,S TP トランジスタ 01
R0030 VI190900 Metal Film Resistor (chip) 22.0 1/10 D RECT. チップ金被抵抗 01
-0041 VI190900 Metal Film Resistor (chip) 22.0 1/10 D RECT. チップ金被抵抗 01
R0050 VC759900 Metal Oxide Film Resistor 330.0 2W J 酸化金属被膜抵抗 01
R0097 V2885100 Carbon Resistor (chip) 27.0 1/0 J RECT チップ抵抗 01
R0098 V2885100 Carbon Resistor (chip) 27.0 1/0 J RECT チップ抵抗 01
RA000 RD356560 Carbon Resistor (chip) 5.6K 63M J RECT. チップ抵抗 01
-A011 RD356560 Carbon Resistor (chip) 5.6K 63M J RECT. チップ抵抗 01
RAL00 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-AL07 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RAN08 RD356270 Carbon Resistor (chip) 2.7K 63M J RECT. チップ抵抗 01
RAN09 RD355100 Carbon Resistor (chip) 100.0 63M J RECT. チップ抵抗 01
RAY01 RE044680 Resistor Array 68X4 抵抗アレイ 01
-Y03 RE044680 Resistor Array 68X4 抵抗アレイ 01
-B007 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RFT01 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
RFT02 RD356100 Carbon Resistor (chip) 1.0K 63M J RECT. チップ抵抗 01
RH000 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-H009 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RK000 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
-K013 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RL001 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
-L007 RD357100 Carbon Resistor (chip) 10.0K 63M J RECT. チップ抵抗 01
RL008 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
32
DGC1B
KEY SENSOR and MA120

RN000 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
-N004 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RRS00 RD356470 Carbon Resistor (chip) 4.7K 63M J RECT. チップ抵抗 01
RS001 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RSW02 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RV000 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RV001 RD354470 Carbon Resistor (chip) 47.0 63M J RECT. チップ抵抗 01
RXM01 RD359100 Carbon Resistor (chip) 1.0M 63M J RECT. チップ抵抗 01
SW001 VV020300 Tact Switch SKQNAA タクトＳＷ 01
SW002 VV020300 Tact Switch SKQNAA タクトＳＷ 01
TA001 V9808400 Transistor Array TD62003AFG(5,S,EL) トランジスタアレイ 02
TA002 V9808400 Transistor Array TD62003AFG(5,S,EL) トランジスタアレイ 02
X0001 V8564300 Ceramic Resonator 20.0MHz CSTCW20M0 セラミック振動子 01
Z0001 VU120900 Key Sensor Socket Black AS センサーソケットＡＳ 05
Z0002 V9543200 Base, Key Sensor Socket PBT NATURAL センサーソケットＢ 08
Z011G WG490100 Pan Head Tapping Screw-P 3.0X6 MFZN2B3 Ｐタイト＋ＰＡＮ 3
Z014G -- Label 種別ラベル (V906370)
VT143200 Circuit Board MA120 ＭＡ１２０シート (VT14340)(XQ393H0) 20

VT443500 Support, PCB VT44351 T=8 三端子用スペーサー 03
VT740000 Support, PCB 3T-9 T=9 三端子用スペーサー 3 03
* WE752900 Insulation Sheet PT-SS 放熱シート（Ｐ）
-- Jumper Wire 0.55 ジャンパー線 (VD04170)
01 VP206500 Fuse Holder EYF-52BC ヒューズホルダ  6 01

01 WC050700 Fuse Clip EYF52BCY ヒューズクリップ  6 01
C0001 VA302600 Ceramic Capacitor-E 0.0100 500V P TATE セラコン（Ｅ） 01
C0002 VA302600 Ceramic Capacitor-E 0.0100 500V P TATE セラコン（Ｅ） 01
C0003 V0069900 Electrolytic Cap. 4700 16.0V TATEJI ケミコン 

C0003 VU642700 Electrolytic Cap. 4700 16.0V FORMING ケミコン  03
C0004 V0069900 Electrolytic Cap. 4700 16.0V TATEJI ケミコン 

C0004 VU642700 Electrolytic Cap. 4700 16.0V FORMING ケミコン  03
C0005 VL232200 Electrolytic Cap. 3300 50.0V TATEJI ケミコン 04
-0008 VL232200 Electrolytic Cap. 3300 50.0V TATEJI ケミコン 04
-0011 UR866100 Electrolytic Cap. 1.00 50.0V RX TP ケミコン 01
C0014 VL232300 Electrolytic Cap. 2200 25.0V TATEJI ケミコン  03

C0014 VY861100 Electrolytic Cap. 2200 25.0V FORMING ケミコン  03
C0015 VL232300 Electrolytic Cap. 2200 25.0V TATEJI ケミコン  03

C0015 VY861100 Electrolytic Cap. 2200 25.0V FORMING ケミコン  03
C0020 VY715600 Electrolytic Cap. 100 50.0V TP ケミコン 

C0020 VT888400 Electrolytic Cap. 100 50.0V TATETE- ケミコン  01
C0021 VY715600 Electrolytic Cap. 100 50.0V TP ケミコン 

C0021 VT888400 Electrolytic Cap. 100 50.0V TATETE- ケミコン  01

D0001 V7803100 Diode 1T4 A0 TE- 52 ダイオード 

-0005 V7803100 Diode 1T4 A0 TE- 52 ダイオード 
33
DGC1B
MA120 and MN

D0001 V9362200 Diode 1T4 A1 TE- 26 ダイオード 

-0005 V9362200 Diode 1T4 A1 TE- 26 ダイオード 
D0001 VB481900 Diode 11ES4 ダイオード  01

-0005 VB481900 Diode 11ES4 ダイオード  01

D0001 WB880800 Diode 10EDA40-TA2B5 52 ダイオード  01

-0005 WB880800 Diode 10EDA40-TA2B5 52 ダイオード  01
DB001 VK421800 Diode Stack D5SBA20 6.0A 200V ダイオードスタック 03
DB002 VQ111500 Diode Stack D3SBA20-7103 4.0A ダイオードスタック 03
DB003 VR253700 Diode Stack S1NB20 1.0A 200V ダイオードスタック 02
F0001 KB003630 Fuse 5.00A JU 125V ヒューズ 01
-0003 KB003630 Fuse 5.00A JU 125V ヒューズ 01
IC001 XQ437A00 IC SI-3051N ＩＣ REGULATOR +5V 03
IC002 XP154A00 IC M5237ML ＩＣ REGULATOR +5V 02
IC003 XJ602A00 IC NJM78M12FA ＩＣ REGULATOR +12V 0.5A 02
IC004 XD343A00 IC NJM79M12FA ＩＣ REGULATOR -12V 03
IC005 XQ374A00 IC STK401-090-E ＩＣ POWER AMP. 60W 09
R0001 VU253100 Fuse Resistor 0.47 1/2 J JIRITSU ヒューズ抵抗 01
R0002 VU253100 Fuse Resistor 0.47 1/2 J JIRITSU ヒューズ抵抗 01
R0006 VC328800 Metal Film Resistor 10.0K 1/4 F YOKO52 金属被膜抵抗  01

R0006 HB027100 Metal Film Resistor 10.0K 1/4 F AX TP 金属被膜抵抗  01
R0007 VC327600 Metal Film Resistor 3.3K 1/4 F YOKO52 金属被膜抵抗  01

R0007 HB026330 Metal Film Resistor 3.3K 1/4 F AX TP 金属被膜抵抗  01
R0008 HW095100 Fuse Resistor 100.0 1/4 J ヒューズ抵抗 01
R0009 HW095100 Fuse Resistor 100.0 1/4 J ヒューズ抵抗 01
RY001 WB476400 Relay DC G5PA-28 12V リレー１２Ｖ 03
-004 IC1815M0 Transistor 2SC1815 Y,GR TP トランジスタ 01
V5908900 Circuit Board MN ＭＮシート (XY932A0) 48

C0005 UF037100 Electrolytic Cap. (chip) 10 16V チップケミコン 01
34
DGC1B
MN
C0064 UF138470 Electrolytic Cap. (chip) 470 16V UUR1C4 チップケミコン 02
C0123 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
-0125 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
C0130 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
* C0131 US064100 Ceramic Capacitor-B (chip) 0.0100 50V K RECT. チップセラ（Ｂ） 01
C0201 UF266100 Electrolytic Cap.-BP(chip) 1.0 50V UWP チップＢＰコン 01
C0202 UF266100 Electrolytic Cap.-BP(chip) 1.0 50V UWP チップＢＰコン 01
C0226 UF119100 Electrolytic Cap. (chip) 1000 6.3V UUR0J1 チップケミコン 02
C0227 UF017220 Electrolytic Cap. (chip) 22 6.3V チップケミコン 01
C0244 UF246470 Electrolytic Cap.-BP(chip) 4.7 25V UWP1E4 チップＢＰコン 01
C0246 UF246470 Electrolytic Cap.-BP(chip) 4.7 25V UWP1E4 チップＢＰコン 01
CN107 V3888200 Connector HIF3H-26PB-2.54DSA コネクタ 04
35
DGC1B
MN
EM101 WA260100 Noise Filter ZJSR5101-333TA-01 ノイズフィルターＥＭＩ
FB100 VQ724900 Chip Inductance BK212 5HM601-T チップインダクタ 01
-103 VQ724900 Chip Inductance BK212 5HM601-T チップインダクタ 01
FL100 VJ928500 Chip Inductance BLM31BE601SN1L 3 チップインダクタ 01
FL101 VJ928500 Chip Inductance BLM31BE601SN1L 3 チップインダクタ 01
H01 BA808520 Heat Sink T220M16-25 ヒートシンク 03
IC002 XU147A00 IC HD6417014F28V ＩＣ CPU 09
IC003 XU462B00 IC MSM514260E-60T3K ＩＣ DRAM 4M 07
IC005 XZ052A00 IC M27C160-100F1 ＩＣ EPROM 8M
IC007 XR738A00 IC TC203C760HFG-001(Z ＩＣ  SWP30 20

IC007 XS725A00 IC TC203C760HFG-002(Z ＩＣ  SWP30B 19
IC008 XW792A00 IC SN74HC132NSR ＩＣ NAND 02
IC011 XZ519A00 IC TC74ACT139F(EL_F) ＩＣ DEMULTIPLEXER 02
IC013 XU462B00 IC MSM514260E-60T3K ＩＣ DRAM 4M 07
IC015 XV451C00 IC ＩＣ ROM WAVE L 64M 07
IC016 XV452C00 IC ＩＣ ROM WAVE H 64M 07
IC103 XJ598A00 IC NJM78L05UA ＩＣ REGULATOR +5V 02
IC104 XN086A00 IC NJM79L05UA(TE1) ＩＣ REGULATOR -5V 02
IC105 XP551A00 IC PCM1702U ＩＣ DAC 08
IC106 XP551A00 IC PCM1702U ＩＣ DAC 08
IC107 X7351A00 IC UPC4570G2-E1-A ＩＣ OP AMP 01
L0001 RD255150 Carbon Resistor (chip) 150.0 0.1 J RECT. チップ抵抗 01
-0004 RD255150 Carbon Resistor (chip) 150.0 0.1 J RECT. チップ抵抗 01
NG1 WE983600 Bind Head Screw 3.0X8 MFZN2B3 小ネジ＋ＢＩＮＤ 01
36
DGC1B
MN
R0107 RD155150 Carbon Resistor (chip) 150.0 1/4 J TP チップ抵抗
-0247 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
-0255 RD350000 Carbon Resistor (chip) 0 63M J RECT. チップ抵抗 01
R0256 HF857330 Carbon Resistor 33.0K 1/4 J ST カーボン抵抗 01
R0257 HF857330 Carbon Resistor 33.0K 1/4 J ST カーボン抵抗 01
SK1 VK863100 IC Socket DICF-42CS-E ＩＣソケット 03
* SN001 WH170200 Chip Inductance 5.0U SN-S3M-2005T チップインダクタ
* -003 WH170200 Chip Inductance 5.0U SN-S3M-2005T チップインダクタ
SW001 VR757300 Slide Switch SSGM14 スライドＳＷ DIP Switch 03
TR004 VJ927200 Transistor 2SA1162-Y(TE85R,F) トランジスタ 01
37
DGC1B
MN and NF and NW and PASW and PEDAL DRIVE

X0001 VV762900 Quartz Crystal Unit 7MHz SMD-49 TP 水晶振動子 03
X0002 VV335600 Quartz Crystal Unit 33.8688MHz DSO751S 水晶発振器 06
* WG000600 Circuit Board NF ＮＦシート (X6968A0)

* C1 WF884700 Capacitor 0.068 250V U.C.S 規格認定コン
* C2 WF884700 Capacitor 0.068 250V U.C.S 規格認定コン
C3 WD090900 Capacitor 3300P 250V J.U.C.S 規格認定コン
C4 WD090900 Capacitor 3300P 250V J.U.C.S 規格認定コン
CN1 LB301470 Base Post Connector LB 3P TE ベースポスト 02
* CN2 WG093000 Base Post Connector B04P-VL-VN-1.8 ベースポスト
* L1 WF997300 Common Mode Coil TF2420VU-302Y3R0 コモンモードコイル
* L2 WF997300 Common Mode Coil TF2420VU-302Y3R0 コモンモードコイル
V5251300 Circuit Board NW ＮＷシート (XU777A0) 08

C1 VS919300 Electrolytic Cap.-BP 4.70 50.0V TATESUT ＢＰケミコン 02
C2 -- Jumper Wire L=5.0mm ジャンパー線 (VS19560)
L1 V7649600 Network Coil 0.6MH ネットワークコイル 05
V3795900 Circuit Board PASW ＰＡＳＷシート (V378990)(XV883A0) 14

CN1 V3891500 Connector, FFC/FPC 52808-2170 ＦＦＣ／ＦＰＣコネクタ 01
LED01 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ 0 01
LED02 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ -2 01
LED07 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ VOLUME 01
LED08 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ TEMPO 01
LED09 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ TRANSPOSE 01
LED10 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ BALANCE 01
LED11 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ METRONOME 01
LED12 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ FUNC. 01
LED13 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ VOICE 01
LED14 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ PART R-R 01
LED15 VT940900 LED Red SLZ-190B-02-T1 ＬＥＤ PART R-L 01
LED16 VT940900 LED Red SLZ-190B-02-T1 ＬＥＤ PART L-R 01
LED17 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ PART L-L 01
LED18 VT940900 LED Red SLZ-190B-02-T1 ＬＥＤ REC 01
LED19 V3860100 LED Green SLZ290B02T1 H=4 ＬＥＤ PLAY/PAUSE 01
PS VN388300 Push Switch SPPH23 プッシュスイッチ STANDBY/ON 03
R-CON V3860200 IR Receive Unit SPS-446-1 リモコン受光ユニット  03

R-CON V9344000 IR Receive Unit SPS-450-1-VP リモコン受光ユニット  03
SW01 VV439800 Tact Switch SKQNAJ タクトＳＷ -/NO 01
SW02 VV439800 Tact Switch SKQNAJ タクトＳＷ +/YES 01
SW03 VV439800 Tact Switch SKQNAJ タクトＳＷ Selector 01
SW04 VV439800 Tact Switch SKQNAJ タクトＳＷ METRONOME 01
SW05 VV439800 Tact Switch SKQNAJ タクトＳＷ > 01
SW06 VV439800 Tact Switch SKQNAJ タクトＳＷ < 01
SW07 VV439800 Tact Switch SKQNAJ タクトＳＷ FUNC. 01
SW08 VV439800 Tact Switch SKQNAJ タクトＳＷ VOICE 01
SW09 VV439800 Tact Switch SKQNAJ タクトＳＷ ENTER 01
SW10 VV439800 Tact Switch SKQNAJ タクトＳＷ FWD 01
SW11 VV439800 Tact Switch SKQNAJ タクトＳＷ R 01
SW12 VV439800 Tact Switch SKQNAJ タクトＳＷ L 01
SW13 VV439800 Tact Switch SKQNAJ タクトＳＷ REV 01

SW14 VV439800 Tact Switch SKQNAJ タクトＳＷ REC 01
SW15 VV439800 Tact Switch SKQNAJ タクトＳＷ STOP 01
SW16 VV439800 Tact Switch SKQNAJ タクトＳＷ PLAY/PAUSE 01
VP188700 Circuit Board PEDAL DRIVE Ｐドライブシート (VP49770)(XL479E0) 15

WE974200 Bind Head Tapping Screw-S 3.0X10 MFZN2W3 Ｓタイト＋ＢＩＮＤ 2 01
VN774800 GND Washer MEP1866 アースワッシャー 2 01
38
DGC1B
PEDAL DRIVE and PK-CTL

VP189200 Pedal TR Plate ペダルＴＲプレート 04
-- Jumper Wire L=10mm ジャンパー線 (VP34160)
* C1 WF146000 Electrolytic Cap.-SS 220.00 35.0V TP ケミコンＳＳ
C2 VI307100 Monolithic Ceramic Cap. 0.100 50V Z T=52 積層セラコン 01
C7 VQ019700 Mylar Capacitor 0.1000 400V K マイラーコン 01
F1 VE439400 Ferrite Bead DSS9ND31H223Q55B フェライトビーズ 01
IC1 XG061A00 IC NJM2403D ＩＣ OP AMP 03
L1 VF968800 Coil SBT-0260TF RX 60uH コイルＳＢ６０ｕＨ 01
LED1 VD180200 LED Red SLZ-981C-12 ＬＥＤ 01
LED2 VN518200 LED Green SLZ-389C-02-T2 ＬＥＤ 01
PI1 VP216000 PI Sensor ON1108 ＰＩセンサー 04
PI2 VP216000 PI Sensor ON1108 ＰＩセンサー 04
PI3 VP216100 PI Sensor ON2153-S ＰＩセンサー 06
R2 VA787800 Trimmer Potentiometer B3.3KTERH0615CN3J0 半固定ＶＲ Loud adjustment 01
R3 VA787500 Trimmer Potentiometer B 470 AX 3P RHEOA 半固定ＶＲ Loud adjustment 01
R7 VA787800 Trimmer Potentiometer B3.3KTERH0615CN3J0 半固定ＶＲ Shift adjustment 01
R8 VA787500 Trimmer Potentiometer B 470 AX 3P RHEOA 半固定ＶＲ Shift adjustment 01
TR1 VM610600 Transistor 2SD1792(TP7L20) ST トランジスタ 03
TR2 VM610600 Transistor 2SD1792(TP7L20) ST トランジスタ 03
V5202200 Circuit Board PK-CTL ＰＫ−ＣＴＬシート (V520210)(XY168C0) 44

C01 VF624200 Electrolytic Cap. 220.00 16V TP ケミコンＲＳ（８Ｘ９） 01
C02 VF624200 Electrolytic Cap. 220.00 16V TP ケミコンＲＳ（８Ｘ９） 01
39
DGC1B
PK-CTL
-34 UB013100 Monolithic Ceramic Cap. 1000P 50V K RECT. チップ積層セラコン 01
-41 UI566100 Electrolytic Cap. 1.00 50.0 ケミコン 01
C-URA UB012470 Monolithic Ceramic Cap. B 470P 50V K RECT. チップ積層セラコン 01
* CL1 WE693500 Ceramic Resonator CSALS16M0X55-B0 セラミック振動子
D3 VN681100 Diode EC10DS4TE12L1A400V ダイオード  01

D3 VS201100 Diode D1F60 1A 600V TP ダイオード  01
IC03 XJ607A00 IC NJM7805FA ＩＣ REGULATOR +5V 02
* IC04 X7527A00 IC M37732S4BFP-25 ＩＣ CPU
IC05 XY340C00 IC MBM29F800BA-70PFT ＩＣ FLASH ROM 4M V1.03 09
IC06 X4623A00 IC BS62LV1026SCP-55 ＩＣ SRAM 1M (LOWER) 05
IC07 XW104A00 IC MM74HC14SJX_NL ＩＣ INVERTER 01
IC08 XL106A00 IC HD74HC123AFP ＩＣ SINGLE SHOT 02
IC09 XW106A00 IC MM74HC32SJX_NL ＩＣ OR 01
IC10 X3073A00 IC MM74HC08SJX SOP ＩＣ AND 01
IC13 XL122A00 IC PST572CMT-R ＩＣ SYSTEM RESET 02
IC14 X3073A00 IC MM74HC08SJX SOP ＩＣ AND 01
IC15 X5814A00 IC NJM2903M(TE1) SOP ＩＣ OP AMP 01
IC16 X3074A00 IC MM74HC573SJX SOP ＩＣ LATCH 02
IC18 X3075A00 IC M74HC74AMTCX SSOP ＩＣ D-FF 02
L02 RD254220 Carbon Resistor (chip) 22.0 0.1 J RECT. チップ抵抗 01
L12 VF968800 Coil SBT-0260TF RX 60uH コイルＳＢ６０ｕＨ 01
-19 VT620400 Chip Inductance BLM21AH102SN1D チップインダクタ 01
R38 RD259100 Carbon Resistor (chip) 1.0M 0.1 J RECT. チップ抵抗 01
40
DGC1B
PK-CTL and PWB

T1 VV556400 Transistor 2SC2412K Q,R,S TP トランジスタ 01
T2 VV556500 Transistor 2SA1037AK Q,R,S TP トランジスタ 01
T3 VV556500 Transistor 2SA1037AK Q,R,S TP トランジスタ 01
ZD1 VP615600 Zener Diode RD62P-T2 62V TP ツェナーダイオード 02
VN543300 Circuit Board PWB ＰＷＢパワー (XL056D0)

6 VP271700 Rivet 1.4 XG-BM14-3000 ハトメ 10 01
7 VP271900 Rivet 2 XG-BM14-30922 ハトメ 4 01
11 VN774800 GND Washer MEP1866 アースワッシャー 6 01
20 VQ187800 Transformer Cover CSA トランスカバー
C0001 VN921500 Capacitor 0.470 250V U.C.S 規格認定コン 03
C0002 VN698300 Electrolytic Cap. 470.00 25.0V FORM. ケミコンＰＳ 01
C0003 FI383220 Capacitor 2200P 400V U.C.S.V 規格認定コン  01

C0003 V5090300 Capacitor 2200P 250V U.C.S.V 規格認定コンＫＨ  01
C0004 VO035100 Capacitor 0.220 250V U.C.S 規格認定コン 02
C0005 FI383220 Capacitor 2200P 400V U.C.S.V 規格認定コン  01

C0005 V5090300 Capacitor 2200P 250V U.C.S.V 規格認定コンＫＨ  01
C0007 VN695300 Electrolytic Cap. 220.00 16.0V RX TP ケミコンＰＳ 01
C0008 V2653100 Capacitor 0.010 250V U.C.S 規格認定コン 01
C0009 VO005400 Polypropylene Capacitor 1500P 630V K FORM. ＰＰコン 01
C0010 VO005400 Polypropylene Capacitor 1500P 630V K FORM. ＰＰコン 01
C0012 VJ762800 Electrolytic Cap. 100.00 6.3V RX TP ケミコンＰＳ 01
C0013 VQ188500 Electrolytic Cap. 1800 200.0V FORM. ケミコンＧＱ 09
C0015 VJ762800 Electrolytic Cap. 100.00 6.3V RX TP ケミコンＰＳ 01
C0016 VN997800 Electrolytic Cap. 1800 200.0V FORM. ケミコンＧＱ  08

C0016 VP286400 Electrolytic Cap. 1800 200.0V FORM. ケミコン 
C0017 VN775900 Polypropylene Capacitor 2.2 250V K FORMING ＰＰコン 03
C0019 VP011700 Electrolytic Cap. 1200 200.0V FORM. ケミコンＧＱ  07

C0019 VP286600 Electrolytic Cap. 1200 200.0V FORM. ケミコンＨＡ 
C0021 VN698400 Electrolytic Cap. 1000 25.0V FORMING ケミコンＰＳ 02
41
DGC1B
PWB
C0024 VP011800 Electrolytic Cap. 1200 160.0V FORM. ケミコンＧＱ  06

C0024 VP286700 Electrolytic Cap. 1200 160.0V FORM. ケミコンＨＡ 
C0026 VN695500 Electrolytic Cap. 470.00 16.0V FORM. ケミコンＰＳ 01
C0028 VN760400 Electrolytic Cap. 820.0 160.0V FORM. ケミコンＧＱ  05

C0028 VP286300 Electrolytic Cap. 820.0 160.0V FORM. ケミコンＨＡ 
CB001 LB301470 Base Post Connector LB 3P TE ベースポスト 02
CB005 LB932070 Base Post Connector VH 7P TE ベースポスト 01
CB006 VD005300 Base Post Connector PH 10P TE ベースポストステック入り 01
CB007 WC050700 Fuse Clip EYF52BCY ヒューズクリップ 01
-012 WC050700 Fuse Clip EYF52BCY ヒューズクリップ 01
D0001 IF004600 Diode 1SS133 T-77 TP ダイオード 01
D0002 VH770800 Diode 1SR139-100 T-32 TP ダイオード 01
D0003 VN771700 Diode D1NS4-4083 1A40V T ダイオード 01
D0009 VN478200 Diode D1NL20U-5083 ダイオード 01
D0011 VT208800 Diode D3S4M 7002 P7.5 ダイオード 02
D0016 VG439300 Zener Diode MTZ J 9.1C 9.1V TP ツェナーダイオード 01
D0018 VN478200 Diode D1NL20U-5083 ダイオード 01
F0001 VN579200 Fuse ULTSCN16.3A125VJUC ヒューズ 04
F0002 VN579200 Fuse ULTSCN16.3A125VJUC ヒューズ 04
F0003 VN579100 Fuse ULTSCN12A125VJUC ヒューズ 02
F0006 VN793100 Fuse K 374/3.15A 250V 小型ヒューズ２５０Ｖ 02
F0007 VN793100 Fuse K 374/3.15A 250V 小型ヒューズ２５０Ｖ 02
J0004 -- Jumper Wire 平型ジャンパー線 (VM60000)
-0037 -- Jumper Wire 平型ジャンパー線 (VM60000)
L0002 VP234300 Coil ELF-18D850CF 8.2mH コイル２ｘ８．２ｍＨ 06
L0003 VN433600 Choke Coil BP-074 RX 200uH チョークコイル２００ｕ 06
L0004 VN433700 Choke Coil BP-133 RX 200uH チョークコイル２００ｕ 05
L0005 VQ459600 Choke Coil S24-R793HV 220uH チョークコイル 05
L0006 VQ459600 Choke Coil S24-R793HV 220uH チョークコイル 05
Q0001 VD678500 Digital Transistor DTA114ES TP デジタルトランジスタ  01

Q0001 VH800700 Digital Transistor UN4111-(TA) TP デジタルトランジスタ  03
Q0002 IC1815M0 Transistor 2SC1815 Y,GR TP トランジスタ 01
Q0003 IC174020 Transistor 2SC1740S R,S TP トランジスタ  01

Q0003 IC260320 Transistor 2SC2603 E,F TP トランジスタ  01

Q0003 VH800600 Transistor 2SC3311ARA Q,R,S T トランジスタ  01
Q0008 VN838300 Transistor 2SC2336B Q,P ST トランジスタ  03

Q0008 VQ116500 Transistor 2SC4793(F) ST トランジスタ  02
Q0009 IB056020 Transistor 2SB560E/F-MP TP トランジスタ 01
Q0010 ID043820 Transistor 2SD438 E,F TP トランジスタ 01
Q0011 VN932000 Transistor 2SC3334 トランジスタ 01
Q0014 VN931900 Transistor 2SA1321 TP トランジスタ 01
Q0016 IA101590 Transistor 2SA1015 O,Y TP トランジスタ 01
R0001 HV757100 Flame Proof C. Resistor 10.0K 1/4 J RX TP 不燃化カーボン抵抗 01
R0004 HV755510 Flame Proof C. Resistor 510.0 1/4 J RX TP 不燃化カーボン抵抗 01
R0007 VN067400 Wire Wound Resistor 6.8 5W K TATESUTO セメント抵抗 03
R0013 VN765700 Wire Wound Resistor 0.33 3W K FORMING セメント抵抗 01
42
DGC1B
PWB
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK
R0018 HL214470 Metal Oxide Film Resistor 47.0 1W J FORMING 酸化金属被膜抵抗  01

R0018 HL714470 Metal Oxide Film Resistor 47.0 1W J FORMING 酸化金属被膜抵抗  01
R0038 HV757180 Flame Proof C. Resistor 18.0K 1/4 J TP 不燃化カーボン抵抗 01
R0053 VP265300 Wire Wound Resistor 6.8 5W K FORMING セメント抵抗 02
RY001 V2695300 Relay DC DG12D1-O(M)-II リレー１２Ｖ  04

RY001 V6881300 Relay DC DG12D1-O(M)-II リレー１２Ｖ  04

RY001 VD506000 Relay DC DG12D1-0(M) 12V リレー１２Ｖ  05
RY002 VJ888700 Relay DC DG24D1-0(M) 24V リレー２４Ｖ 04
* T0001 XC083B00 Power Transformer U,C P1053H(Y) 電源トランス
T0002 XL084A00 Power Transformer EX 電源トランス 09
1 V8727300 Radiator Assembly SEMKO DB ラジエータＤＢＡｓｓ ' ｙ 03
2 VN932100 Diode Stack RBV-606 6.0A 600V ダイオードスタック  04

2 VN953300 Diode Stack D5SBA60 5.0A 600V ダイオードスタック  04
3 VN774500 Triac TM1641S-L 16.00A トライアック 04
11 VP033300 Support SUS301CSP TRI サポートＴＲＩ 07
12 EZ000570 Cup Screw-B 3.0X8 MFC2BL カップＢタイト 01
* 13 WF112500 Bind Head Tapping Screw-B 3.0X5 MFZN2B3 Ｂタイト＋ＢＩＮＤ

1 VN412200 Support SUS301CSP HIC サポートＨＩＣ 08
2 VN473800 Radiator Assembly J EX HIC ラジエータＨＩＣＡｓｓｙ 04
3 XK413A00 IC XK413A0-E YH-SI ＩＣ REGULATOR (HARF BRIDGE) 11
11 VN757800 Insulator A インシュレーターＡ 08
12 VP055500 Case, HIC PRE 94V-1 L ＨＩＣケースＬ 01
1 VN412700 Radiator Assembly J EX DI ラジエータＤＩＡｓｓ ' ｙ 04
* 2 X6794A00 IC NJM7820FA ＩＣ REGULATOR +20V 1A
3 VC407900 Transistor 2SD1913 R,S ST トランジスタ 01
4 VN399400 Diode Stack FMU-12R 5.00A 200V ダイオードスタック 03
5 VN399300 Diode Stack FMU-12S 5.00A 200V ダイオードスタック 03
11 VN447600 Support SUS301CSP DI サポートＤＩ 2 07
* 12 WF112500 Bind Head Tapping Screw-B 3.0X5 MFZN2B3 Ｂタイト＋ＢＩＮＤ 2
* 13 WF516700 Sarcon TR 30T-TO-220 18X13 サーコンＴＲ
43
DGC1B
PWB
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK
1 VN412600 Radiator Assembly J EX PW ラジエータＰＷＡｓｓ ' ｙ 04
2 VN399500 Diode Stack FMU-36S 20.0A 600V ダイオードスタック 05
3 VN137600 Transistor 2SC3263 - ST トランジスタ 05
4 VN715800 Diode Stack D5LC40 5.0A 400V ダイオードスタック 03
5 VN838200 Transistor 2SA1006B-AZ Q,P トランジスタ 03
6 VN822000 Bushing TRB1749-A ブッシング 01
* 11 WF112400 Bind Head Tapping Screw-C IT 3.0X10 MFZN2B3 Ｃタイト＋ＢＩＮＤ
12 VK195900 Radiation Sheet BFG-20ADH-3 19X24 シート放熱 01
13 VN829800 Radiation Sheet BFG-20AD 13X18 シートホウネツ 01
14 VP047400 Support SUS301CSP DH サポートＤＨ 07
15 VP049500 Support SUS301CSP PW サポートＰＷ 07
* 16 WF112500 Bind Head Tapping Screw-B 3.0X5 MFZN2B3 Ｂタイト＋ＢＩＮＤ 3
17 VP244800 Socket J PW ＰＷソケット 03
* WC934600 LCD 24X2+7 液晶ディスプレイ
V7194700 1/2" CD-ROM Drive CR-177B １／２ " ＣＤ−ＲＯＭ 26

WA111200 1/2" CD-ROM Drive SR244W1/R74-2121 １／２ " ＣＤ−ＲＯＭ 25
V6492300 3.5" Floppy Disk Drive 1M/2M ALPS DF3 ３．５ " ＦＤＤ 13
XE143A00 Speaker PKM22EPPH4001-B0 スピーカ Beep 02

XQ797C00 Speaker 16.0cm 8ohm 60W スピーカ WOOFER 10
X I 1 6 8 A 0 0 Speaker 2.5cm 8ohm 60W スピーカ TWEETER 10
VP167900 Thermostat Assembly GP KD TH PH 2P サーモスタットＡｓｓ ' ｙ Key drive 2 08

VG927300 Thermostat サーモスタット Key drive 2 04
VH785100 Switch SDDT-DPST J.U.C.S. シーソーＳＷ MAINS ON/OFF 04

VN774700 AC Inlet M1816 3P ＡＣインレット３Ｐ AC LINE INLET 03
VP185200 AC Cord Set UC 3P 10A 電源コードセット 08
XQ426A00 Power Transformer UL/CSA A 電源トランス 13
44
A B C D E F G H I J K L M N O P Q
<Page 1> DGC1B

DGC1B BLOCK DIAGRAM, WIRING SPEAKER BOX UNIT (LEFT)
1 1
NW !6 -1
BLOCK DIAGRAM WIRING !4 !3 !5 CN1
(2P)
CN2
(4P) TWEETER L
to CONTROL UNIT N.C. N.C. Front View Front View
KEY DRIVE UNIT L
CONTROL UNIT
R L R L
(CTRL) D(00-15)
WOOFER L
D-FF
8MHz JACK1 CN6 CN1
FLASH
BUFFER IC037
FLASH DRAM SHRxD0 (7P) (8P) !6 -2
ROM MEMORY 16M
(20P) 16M CN5 (9P)
512M IC039 AUX IN AUX OUT
IC027 (20P) 20 IC018 IC015 50 LINE JK6 JK5 JK8 JK7 CN8
74 72 MINI-DIN 8PIN
(48P) BUFFER (48P) (42P)
51
SHTxD0 3 DRIVER 15
16M !2 (8P)
CN01
(10P) PLAY DATA 5 62
PC RxD1 29
1,14 20 CPU IC013 TO HOST IC01 (6P) Connector assembly (JA-SP) SPEAKER BOX UNIT (RIGHT)
REGULATOR (16P) VH
+3.3V +3.3D 20 IC036 A(01-16)
+5D
IC038 (3P) D-FF (20P) IC007 JK002
30 FLASH SRAM y u NW !8 -1
(112P) PC 5 66
RxD0 CPU ROM 1M CN1 CN2
8M CN7 (4P)
CN9 (2P) (4P) TWEETER R
LCD module IC031 83 48 47 IC02 (6P) VH
(20P)
23 P42 IC04 (5P)
AMPLIFIER UNIT not
CN006
(80P) IC05 IC06 R
16MHz
SHRxD1
SHTxD1
P41 CN2 CN4 VH installed
CN02
(9P) SENS DATA (48P) (32P) (10P) (11P)
~
2 (16P) BUFFER INVERTER MAC P70
CN6 CN5
!7 WOOFER R
2
2 4 PC2 HOST MA120 not installed
IC032
D0-7 1MHz
1MHz PC1 SELECT
(9P) (4P)
!8 -2
IC008 +5DV +5D
(20P) (5P) MIDI
SW001 (8P) REGULATOR KEY SENSOR UNIT
CN03
FDC CN1
POWER
CN005
(34P)
IC03 (3P) DATA BUS (Primary)
TRANSFORMER (8P)
FDD IC029
(Secondary)
KEY SENSOR
D-FF
24
(64P) 40
ADDRESS BUS !0 Connector assembly (JA-MN)
D0-7 PHOTO
@8
A0-7
COUPLER JK001 r
CN004
+5D IC016 D0-7 IC004

+5D
MIDI IN
16P
(4P) TO PK-CTL
DGND (20P)
10
TxD2 (6P) D-FF 8M RESET N.C.
NPA0-6 SCI RES
TxD1 4M IC18 (14P) 3 CONTROL SENSOR/MN/PK CONNECTION:
NPB0-6 12 9 8 MIDI OUT CN2 CN3 CN4 SNSR PK MN
TxD3 (16P) GATE ARRAY IC07,IC13 FU (6P) (3P) (7P)
CN011
SWRD0-7
CN06
Speaker IC026 8
RxD3 (14P) (3P)
PASW (2P)
(64P) 7 IC012
(14P)
IC08,IC10 N.C.
(16P) (14P) CN104 CN102
MRC1-6
Panel MN (8P) (5P)
Switches THERMO CN2
CPU IC012 (11P)
TRANSISTOR 6 CONTROL
ARRAY (14P) CN3 CN4 CN5 XH
CN007
LED IC020 IC15 (8P) SENSOR FOOT (4P) (3P) (2P)

CN1
3,8 11 12
IC033 (16P)
(21P) (21P)
MINI
INPUT I/F CONTROL
3 IR Receive
Unit
(16P)
10
BINARY
7 PHOTO
D-Sub (4P)
THERMO
IC09,TR1
(14P)
3
COUNTER CONNECTOR
w CN1
CN04
8MHz COUPLER
POWER TRANSISTOR IC021
6 to CONTROL CN103
(7P) DB (26P)
SWITCH ARRAY (16P) 1MHz
IC003,005 IC012
(14P)
CABLE CTRL G
IC034 (6P)
13 12
FOR PIANO
CN05 CN08 EMI NF
(16P) (7P) (3P) FIL. COIL
CN001
CD PANEL
CN008
!1
CN1
FOOT
7SEG LED x 2 (12P) (12P) (15P) (4P) CONTROLLER w CONTROL UNIT
REGULATOR EMI COIL Front View
+5V FIL.
+5D MAINS
IC006 (3P) power
+5VD switch
CN009
PORT BUS
N.C. IC001
PROTECT CN37
(4P)
(14P) +100V DRIVE C (16P)
FROM
PWB TO CONTROL UNIT
13 12 TxD3 CN12 MIDI MIDI TO HOST
CN215
ADJ FOR_CD
PWM Key No.1~12 (6P) IN OUT
o
CN002
4MHz CN37 JK002
REAL TIME I/O RxD3 Signal JK001
(16P)
CLOCK EXPAND (3P) IC1
CN003
PHOTO PWM TO MN-CN12

N.C.
IC024 IC023 5 COUPLER CN201 CN214 (64P) YM3421-F 4MHz
q
(3P) (10P) CN101
(14P)
PWB
AC INLET
(8P) (16P) N.C.(3P)
DRIVE A
CN38
IC014 (1) Key No.13~44 PWM
IC1 (16P)
CB5
(6P) (7P)
CN36 CN37 CN34 CN35 (64P) YM3421-F 4MHz
THERMO (3P) (16P) (3P) (3P) CB1
TO CONTROL UNIT CNSWP (6P)
DRIVE A (2) CN7
CN38
IC1
4 STAT
CN37 CN36 CN35 CN34
Key No.45~76 PWM
(64P) YM3421-F
(3P) (4P)
Connector assembly
(GPS)
4
THERMO
(16P) (3P) (3P) (3P)
TA1~3 e -3
CN115
STAT TO CONTROL UNIT
(14P) TR
CB6
(10P) Connector assembly (CONNECTION-FU) TO FU : FU RELAY CONTROL
t
CN116
BUS 98 CD CONTROL ARRAY
ATAPI (DA) RESET 45
e -1 i
CNA1
BUFFER SRAM MIDI MIDI (6P)

CN2
DRST DRST
(30P) (30P) (20P) IC23 DSP CONTROLLER 48 5 I/F 1
CN1
FROM PWB (HIGH VOLTAGE)
CN114
IC17, 18 (14P)
1M PLD (6P)
(10P) DRIVE B Key No.77~88 +100V FROM PWB (LOW VOLTAGE)
3 4 1 2 IC19
(3P) CN101 CN117
FLASH 97 SWP
(64P) (16P) (3P)
ROM XTAL1 (44P) PROTECT Signal
CNA2
CN3
(48P) (144P) 120,

124
IC16 IC15
THERMOSTAT
KEY DRIVE UNIT not installed TO SENSOR
(25P) (25P) IC10 IC1 (TO MD)
11.2896MHz TO PWB TO SENSOR/MN CN001
TO PWB
@5
CN1
(50P) e -2 (15P)
DATA BUS PEDAL DRIVE UNIT

CN01
ADDRESS BUS CTRL G CN08 CN10 CN02 CN03
(10P)
@4
TO CONTROL UNIT e -4 EL
(14P) LINE 10, 11 (3P) (7P) (9P) (8P)
FOOT
IC21 DRIVER CONTROLLER
(16P)
CD
@9 -1 @9 -2 @9 -3
9 8 (14P) +5D CNSWP (6P) (5P)
MULTI- (4P)
5 -
PLEXER IC22 ADC RESET RESET
IC25 (6P)
CONTROL
LOUD PWM
SOLENOID
TO CONTROL UNIT
@6 -1 @0 5
CONTROL SHIFT PWM @7
CN1
13 - 14 3 9 - 8 SRCN
&DAC PRESET DRIVER LOUD
CN4
CNRCA 16, 17 IC11, 24 PROTECT
2 1 13 13 - 14 PRESET (3P) (14P) TH PEDAL DRIVE UNIT PK-CTL @3
R - (28P) CN05
AUDIO/ANALOG +5D CN34 CN36 CN34
(4P) (7P)
6 7 (16P) IC2 +3.3V, +1.8V CN3 CN5 CN4 CN214 CN215 CN36 (3P) (3P) (3P) CN114 (3P)
MIDI IN L -
IC3 REGULATOR
+3.3D (2P) (3P) (5P) (6P) (3P)
CN201 (14P)
(3P) @2 (3P)
DRIVE A (1) DRIVE A (2) CN115 (14P)
CN2
CD ROM drive +1.8V SHIFT VH PH PH 100V/120 CN116
CN7
IC12,13 TR1, 2 N.C. Key No.13~44 Key No.45~76 Key (6P)
(3P) TR1,2, D1-4 GND
CN38 (2P)
DRIVE B No.77~88
PEDAL DRIVE
CN15
CN06 (16P) CN04 (4P) DRIVE C CN38 (2P) CN117
@6 -4
(3P) (2P) CN37 (16P) CN35 (3P) CN37 (16P) CN35 (3P) CN101 (16P) (3P)
(2P) Key No.1~12
CN3
CN6
XH XH
IC1 (8P) LED1 CN2 CN1 N.C.
(TO MD) THERMO THERMO
(5P) SENSOR 3 1 (4P) (5P)
CONTROL RED
CN5
LED2
5 7
PI1-PI3 GREEN !9
COMPARATOR
@6 -2 @1
PWB HIGH VOLTAGE: TO PEDAL DRIVE
TO PEDAL DRIVE UNIT
SHIFT LOUD
6 6
@6 -3
KEY SENSOR UNIT

Parts List Connector
PK-CTL Location Unit Name Ref No. Part No. Assembly Destination Remarks Availability
KEY SENSOR SENS
SOSTENUTE
(10P)
q Amplifier Unit 133 (WF88600) AC CONNECTION PWB-CB1 NF-CN2 3P-4P
PC80,Q80 CN1 NF-CN1 AC INLET 3P
IRQ 59
60 6
2 CMD CMD
w Amplifier Unit 200 (V525770) SW-ASSY
CPU1 1
2 MIDI SENS FU-CN3 AC INLET 4P
HD64F2128 +5V e-1 PWB-CB5 Connector 6P 7P-6P 1820L
CNH1 CPU(FLASH)
+12V
AMPLIFIER UNIT Connector 6P 10P-6P 150L
(20P) (64P)
GND e-2 PWB-CB6
Amplifier Unit Connector 10P 10P-10P 1820L
7 CN1 e-3
210 V5624100 GPS
Connector 6P Connector 10P 6P-10P 200L
7
(26P)
AN0~7
PD(PD0-7)
N.C. (2P) N.C. (9P) (4P) (26P) e-4 Connector 10P Connector 10P 10P-10P 1720L
CN9 CN6 CN7 CN107
TA1,2 DRIVE &
7MHz
X1 r Amplifier Unit 230 (WJ01670) MN-SENS MN-CN2 KEY SENSOR-CN1 11P-9P-16P (1450+460)
OP-AMP(14P) 1 3
OP1,2 72 74 1 FU-CN4 3P-6P 210L
50 MIDI
MIDI ME0,ME1,ME2 IC25 +5D t Amplifier Unit 240 (V525810) CONNECTION-FU FU-CN5 Connector 6P 2P-6P 210L
CN2
KEY (6P)
51
SHUTTER 84
5 +12D MN-CN7 4P-6P 180L
SH7014
IC 91 REVAD y Amplifier Unit 250 (V525820) MA-JA2 MA120-CN5 JACK1-CN7 4P-4P 200L
CN5
(11P) N.C.
CPU 105 DGND Connector 2P 8P-2P 1210L
MU
LED UNIT DRAM EPROM IC2 u Amplifier Unit 260 (V525830) JA-SP JACK1-CN8
4M 8M CS2 (10P) Connector 4P 8P-4P 1210L
LD0~LD11 (112P) DEC 12
IC3 IC5 A13 IC11 i Amplifier Unit 270 VZ172500 GDS-98B Connector 10P CONTROLLER-CN001 10P-15P
o
(44P) (42P) (16P)
Amplifier Unit 280 WD041100 CDSWP2 MN-CN12 DSP-CNSWP 6P-6P 3.9m
A(1-9) A(1-20)
MN-CN102 10P-5P 250L
ADDRESS BUS
IC
INITIAL CLEAR +B !0 Amplifier Unit 290 (V526450) JA-MN JACK1-CN2
DATA BUS CONTROL MN-CN104 10P-8P 250L
8 D(0-15) IC8, TR3,4 +5D !1 Amplifier Unit 330 VK105800 KRD-KRD MN-CN103 MA120-CN4 7P-7P 300L 8
A(1-12) (14P)
33.8688MHz !2 Amplifier Unit 340 (VK10420) KRD-KRD MA120-CN6 JACK1-CN5 9P-9P 250L
X2 !3 Amplifier Unit 380 V5600600 VOL JACK1-CN1 8P 20L
SWPCS +3.3D +3.3DC +5D !4 Amplifier Unit 390 V5600700 HP JACK1-CN6 7P 20L
REGULATOR
33
IC24,TR8 !5 Speaker Box Unit (Left) L70 (V525090) SP-L NW-CN1 Connector 2P 2P-2P
LMA(0-21) ROM HMA(0-21) ROM
WAVE L WAVE H (3P) !6-1 Speaker L (Tweeter)
228 64M 64M Speaker Box Unit (Left) L80 (V525110) SP-IN NW-CN2 4P
LMD(0-15) !6-2 Speaker L (Woofer)
SWP30 IC15 IC16
+3.3D (44P) (44P) !7 Speaker Box Unit (Right) R70 (V525100) SP-R NW-CN1 Connector 4P 2P-4P
IC7
HMD(0-15) !8-1 Speaker R (Tweeter)
30,210,230 Speaker Box Unit (Right) R80 (V525110) SP-IN NW-CN2 4P
MAINS
(240P)
RD(2-17) JACK1 2/2 JACK1 !8-2 Speaker R (Woofer)
DRAM
power NF 4M DRIVE A(1)-CN37
switch (3P) (4P)
L1 L2 RA(0-8) IC13 !9 Key Drive Unit 260 (VP56470) GKD-A2 PK-CTL-CN06 DRIVE A(2)-CN37 16P-16P
(44P)
DRIVE B-CN101
CN1
CN2
77 76 66 222 65 64
OP AMP OP AMP IC5 (16P) @0 Key Drive Unit 270 (VP16710) GKD-B DRIVE B-CN115 DRIVE C-CN201 14P-14P
DBR
DBL
OP AMP 1 +
9 DACL 1 IC107 (8P) IC114 (8P) (10P) IC2 (9P)
EQUALIZER
(9P)
POWER AMP. 60W
(4P) (4P) (8P)
(2P)
2
- TWEETER L DRIVE A(1)-CN35 9
DAC
CN1
CN2
GCLK 2 14 6
-
7 3 + 1 2 - 1 L 7
-
8 VR02 2 L L 1 15 L 3 L @1 Key Drive Unit 280 (VP16720) GKD-C PK-CTL-CN04 DRIVE A(2)-CN35 4P-3P
LE IC105 IC1 (9P) BASS
MELDATA
7 4 DRIVE B-CN117
(20P) +
7 8
CN5
CN7
CN8
- RY1 (4P) - WOOFER L @2

GCLK
Key Drive Unit 290 (VP16730) GKD-D DRIVE A(1)-CN36 DRIVE C-CN215 3P-3P
ADLR
VR01 IC3-IC6
CN104
CN5
CN6
CN2
OP AMP OP AMP VOLUME (8P) 5 16 R @3 Key Drive Unit 300 (VP16740) GKD-E DRIVE A(2)-CN34 DRIVE B-CN114 3P-3P
(2P)
2 IC114 (8P) OP AMP
IC108 (8P)
CN5
LINE DACR 1 DAC PK-CTL-CN01 10P-10P

DRIVER 2 14 7 VR03 9 R R 1 + @4 Key Drive Unit 310 (VP16750) GKD-F Connector 10P
CN12
GCLK 6 - 3 + 1 6 - 7 R
IC26 LE
IC106
3
-
2 TREBLE
2
- TWEETER R PK-CTL-CN03 8P-10P
(3P) 7 IC1 (9P) MUTE
CN1
1 (20P)
MUTING @5 Key Drive Unit 320 (VP16760) GKD-G PK-CTL-CN02 Connector 9P 9P-9P
CN2
(16P)
CN4
3
-
2 OP AMP CTL
3 R
(4P)
F1
(6P) (8P) IC2 (9P) (9P)
TR2-4
(2P)
4
+
@6-1 DRIVE A(1)-CN34 Connector 6P 3P-6P
(6P) OP AMP OP AMP (4P) - WOOFER R @6-2 DRIVE A(2)-CN36 3P-16P
NOISE RY IC7 (8P) Key Drive Unit 330 VP167700 GKD-H
@6-3
CN3
CN2
RY1 JK7 DRIVE B-CN116 Connector 16P 6P-16P

FILTER 6 3
+
L/L+R @6-4 PK-CTL-CN05 7P-16P
OP AMP @7 Key Drive Unit 390 VP169000 PHONE JACK PK-CTL-CN08 CTRL G 3P-4P
IC7 (8P) AUX OUT
JK8
10
7
+
1
@8 Key Sensor 100 VZ141800 SENSOR KEY SENSOR-CN1 Connector 9P 10P 10
R @9-1 PEDAL DRIVE-CN3 3P-16P
MUTING CTL
+B +B @9-2 Pedal Drive Unit 37 VP188900 GPD PEDAL DRIVE-CN5 Connector 16P 5P-16P
TR1 JK5
POWER
(8P)
(7P)
REGULATOR
@9-3 PEDAL DRIVE-CN4 6P-16P
TRANSFORMER +5V +5A L/L+R
CN103
+5 +5D The parts that correspond to the number with ( ) are not prepared as service parts.
CN4
REGULATOR IC103,IC104
CN102
GND3 (3P) (3P) -5A MU

IC2, TR1 AUX IN
(3P)
(7P) JK6
(Primary)
(5P)
+5V
(3P)
+12A R
+5
CN3
REGULATOR N.C. -12A

HPSW
HPSW
GND1
IC1 (3P)
R1
L1
R0
L0
(Secondary)
CONTENTS
CN1
CN1 CN6
(8P) (7P)
N.C. Circuit diagram notational explanations.
BV
REGULATOR
+B N.C. DGC1B OVERALL CIRCUIT DIAGRAM
DB3 -B (Example)
PWB
ATAPI(DA)...........................4 MN........................................2
CB6
P.SW P.ON
11 to PK-CTL-CN02 11
12V +12
REGULATOR GND2
(9P) (10P) (Page 5: K-8) CD PANEL...........................3 JACK1..................................6
CN6
CONTROLLER(CTRL).........3 KEY SENSOR......................6

to JACK-CN5
IC3,IC4 -12
(3P) (3P) Page 5 are the page of a circuit diagram.
RY RY
K-8 is indicates the location of the counter inter-sheet connector. CTRL G................................5 MA120..................................6
DB........................................2 NF........................................6
(7P)
F1 F6 F2 (The alphabet indicates horizontal direction and the number indicates vertical direction)
CB5
NOISE +100V
DRIVE A(1)..........................5 NW.......................................6

CB1
FILTER F7 F3
+8V
(3P) +20V
DRIVE A(2)..........................5 PASW...................................3
DRIVE B...............................5 PEDAL DRIVE.....................5
DRIVE C...............................5 PK-CTL................................5
DSP......................................4 PWB.....................................5
12 FU........................................6 12
DGC1B DGC1B
<Page 2> DGC1B

DGC1B OVERALL CIRCUIT DIAGRAM 1/5 (DB, MN)
1 1
MN DB
NAND
DRAM 4M EPROM 8M RAM 1M
N.C. DIP SWITCH
2 ROM 1M 2
not installed
DEMULTIPLEXER
to PK-CTL-CN02 CPU
(Page 5: K-8)
KEY SENSOR-CN1
3 (Page 6: P-5) 3
SWX00B
not installed
N.C.
Photo Coupler
4 4
REGULATOR +3.3V
ROM WAVE L 64M D/A CONVERTER

REGULATOR +5V
Photo Coupler
5 to CONTROLLER 5
-CN001 OP AMP
(Page 3: B-8)
SWP30
N.C. V306900
6 6
DRAM 4M
ROM WAVE H 64M

: Ceramic Capacitor
LINE DRIVER
N.C.
7 7
Note : See parts list for details of circuit board
component parts.
REGULATOR -5V
3 1
8 REGULATOR +3.3V 8
REGULATOR +5V
DAC
3 1
to MA120 -CN4 not installed
(Page 6: H-8) 2
OP AMP OP AMP
9 DAC not installed 9

to DSP-CNSWP
(CD CONTROL)
(Page 4: O-8)
OP AMP
10 not installed 10
Parts inside of ( ), are not installed.

V590890
N.C
to JACK1-CN2
(Page 6: A-4)
11 11
12 12
DGC1B DGC1B
<Page 3> DGC1B

DGC1B OVERALL CIRCUIT DIAGRAM 2/5 (CD PANEL, CONTROLLER(CTRL), PASW)
1 1
REGULATOR +3.3V
CONTROLLER (CTRL) BUFFER
OR OR OR LCD
2 2
XX
SYSTEM RESET
XX
FLASH ROM 512M
XX
XX
BOOT Switch
XX
D-FF D-FF
FDD
INVERTER
LCD DRIVE
3 3
XX
XX
XX
DRAM 16M FLASH MEMORY BUFFER

V1.00 BUFFER
XX
CPU
PASW
INVERTER
4 STANDBY/ON 4
OR
XX (0) (-10)
XX
FDC
(-2)
5 (-4) VOICE REC 5

(-6)
(-8)
XX
DECODER
Photo Coupler
6 6
IN
MIDI
CN1
OUT Pin No. FUNCTION
FWD
INVERTER
REV
REC
INVERTER VOICE
7 7
to DSP-CN1
(PAGE 4: N-2)
TRANSISTOR
ARRAY
Photo Coupler
SINGLE SHOT
V379590
INVERTER SCI
INVERTER
8 8
to PK-CTL-CN01
(PAGE 5: K-8)
to MN-CN7 Photo Coupler
(PAGE 2: A-5) TRANSISTOR
CPU ARRAY
to FU-CN5
(PAGE 6: B-11)
TO CONTROL N.C. CD PANEL

CABLE
9 FOR PIANO Photo Coupler 9
REGULATOR +5V
XX
DRIVE
to SPEAKER
(Sounder
assembly)
XX
BINARY COUNTER
not installed
10 10
HOST SELECT
D-FF
OR
TO HOST
REAL TIME CLOCK SELECT
INVERTER WG91780
11 11
DRIVE SELECT
LINE TRANSCEIVER Timer adjustment

N.C.
: Ceramic Capacitor CD-ROM PANEL

I/O EXPAND
XX : Not installed
WARNING
Note : See parts list for details of circuit board Components having special characteristics are marked
component parts. and must be replaced with parts having specifications equel
WJ08980
12 to those originally installed. 12
DGC1B DGC1B
<Page 4> DGC1B

DGC1B OVERALL CIRCUIT DIAGRAM 3/5 (ATAPI(DA), DSP)
1 1
DSP
to CONTROLLER-CN002
2 (Page 3: B-7) 2
Photo Coupler
PLD
3 3
TRANSCEIVER
SRAM 1M
4 4
TRANSCEIVER
FLASH MEMORY
INVERTER
5 5
DSP For RESET

INVERTER
INVERTER SYSTEM RESET
6 6
LINE DRIVER
7 7
MULTIPLEXER
AUDIO/ANALOG
MIDI IN CD CONTROL to MN - CN12
(Page 2: A-9)
OP AMP
INVERTER
INVERTER
8 8
ADC / DAC
INVERTER
OP AMP REGULATOR +3.3V

OP AMP
9 OP AMP 9
REGULATOR +1.8V
Parts inside of are not installed.

V525430 0
: Ceramic Capacitor
10 10
ATAPI (DA)
Note : See parts list for details of circuit board
component parts.
11 11
V525550
CD-ROM DRIVE
12 12
DGC1B DGC1B
<Page 5> DGC1B

DGC1B OVERALL CIRCUIT DIAGRAM4/5 (CTRL G, DRIVE A(1), DRIVE A(2), DRIVE B, DRIVE C, PEDAL DRIVE, PK-CTL, PWB)
1 1
DRIVE C DRIVE A (1) DRIVE A (2) DRIVE B

TRANSISTOR ARRAY TRANSISTOR ARRAY
TRANSISTOR ARRAY TRANSISTOR ARRAY
YM3421-F
!
YM3421-F TRANSISTOR ARRAY
YM3421-F TRANSISTOR ARRAY
!
! !
2 to Key Solenoid Assembly 2

(Key No. 1 - 12) to Key Solenoid
Assembly
(Key No. 77 - 88)
N.C.
VN58840 3
PWM GENERATOR
to Key Solenoid to Key Solenoid
3 Assembly Assembly
3
(Key No. 13 - 44) (Key No. 45 - 76)
4 4
PEDAL DRIVE
5 5
PWM GENERATOR PWM GENERATOR
VN58830 7
LOUD Solenoid
Assembly
! VN58820 7 VN58820 7
SHIFT Solenoid
Assembly
LOUD
! !
COIL !
!
6 ! 6
SHIFT
!
VP18870 5
7 7
PK-CTL
Photo COMPARATOR
to CONTROLLER-CN001
Coupler
TEKTRONIX 2232 TEKTRONIX 2232 TEKTRONIX 2232 TEKTRONIX 2232 TEKTRONIX 2232 TEKTRONIX 2232
(Page 3: B-8) 456
FLASH ROM SRAM 1M
INVERTER
8 8
to MN-CN2
(Page 2: B-3)
to KEY SENSOR-CN1
(Page 6: P-5)
PLAY OFF PLAY ON OR
to FU-CN4 REGULATOR
PWB (Page 6: B-11) +5V
AND
5
DTA114ES GND
Q1
GND
OR
DG1U(12V)
1SS133
1
10K
R32
D1
R1
RY1
T2
9 9
C18
F2
0.1
1SR139 22 10 D9 R11 CB9 CB10 +HV

T1 R52 R10
R2 6.8K D2 R5 D3 7
19 20 21
47 s5 +HV
9 27 27 D1NL20U A10068(Q/P)
22
C1815(Y/GA)
D1NL20U 8 +HV
Q3
R6
1/50
C32
1K
11
C9
C1740S(A/S)
s19
R1
470/25
CB5
INVERTER
R34
R41
100
390
100K
C2
R57
Q2 100K
R4
C3263 D17 1
1/50
VHIS
C32
510
2
16 17
R17 1SS133
FMU-36S
CPU
D6
R18
12
1P47
Q7 A1321
C10
s19
1 Q8
5P6.8
Q14
R53
RY2
YH-S1
6 R12 R17 C23368(Q/P)

100K
s11
R56
D4 RBV-606 3 R20 R35

SYSTEM RESET
13 14
s16
10 Q5 1
D5
R36 82K
13 C3263 RY2
1200/200
R21 10K 12K

1SS133
RY1 L3
C3334
C3334
CB7 F1 CB8 D61U(24V)

D12
C19
Q11
Q15
R13
3P0.33
3P0.33
R51 10 14 Q16
2200P/400
s4
R15
9 10 11
6 R42 A1015(Q/Y)
CB1 C8 R7 200uH R22
1
4.7/160
C35
C3
L 1 L2 4 5P6.8 1 12K
to NF-CN2
L1 0.01
7
2.7K
14 R43
SW+
AND
C37
R24 Q12
C1
100/6.3 F6
s7
s7
SW–
s7
C4
14
4.7/100
8
200uH
(Page 6: B-8) C12
C33
1K
22/16
R46
R45
C3334
6.8K
18K
1200/160
C22
R38
PO–
2200P/400
3P0.1
10K
820/160
D5LC40
s13
s18
1
D-FF
D10
s3
C24
R48
C28
PO+
C13
L5
s14
C5
R23 1
FMU-12S
CB1815(Y/GR)
Q17
15 E
IC 1
1K
5
D7
1 2 E
4
R47
10K
4 E
3
100/6.3 5 REGULATOR +20V +8V

2
16 F7
C15 IC2
+8V
1
s13 NJM78M20FA
R58
220
s10 IN OUT +20
10 C17
COM CB6 10
47/50
4700P/400
C34
2.2/250
REGULATOR
C39
100/50
PHI
C20
SINGLE SHOT
4700P/400
R54 R25 D18

C40
390 390 D1NL20U OR

C30
0.1
R27
56
B560(E/F)
Q9
R39
Interchangeable Parts at Manufacture - Stage

1K
R28
U, APTW
47
Mark Reference Parts Number Parts Name D1913(R/S)

VN54330 Q6
1 D1, D12, D14, D17 1SS133 R40
1SS176 s1 TEKTRONIX 2232 Q10
s2 D438(F/F) 1K
1SS133
10/16
2 Q3 2SC1740S(R/S) s3
C36
FMN-12R
8. 2mHz2 10
D14
R29
2SC2603(E/F)
1
D8
1000/25
10
C1815(Y/GR)
s4
C21
2SC311A(Q/A/S) 6.3A125V 200uH Q13 F3

CB9 CB10
s5 6.3A125V R31 L6
1 10
3 s5
s6 2.0A125V L4 1K 200uH
s7 0.47/125(U)
4 R33 1
0.47/250(C)
s8 3P0.22
LATCH
MTZJ9.1C
D3S3M
470/16
470/10
5 Q1 DTA11EES s9
D11
C26
C31
D16
UN4111
s10 XL207
6 D4 ABN-606 s11 XC083
11 D5SBA60 s12
s13 3.15A250V CTRL G N.C. 11
7 R7 VN06740
VN63060
s14 1800/200 SINGLE SHOT INVERTER OR AND AND D-FF AND
s15
s16
s17
TM1641S-L
0.22/125(U)
VN54330: U, APTW models
0.22/250(C)
s18
s19 : Flame Proof Carbon Resistor
: installed
: not installed : Wire Wound Resistor FOOT
CONTROLLER V520220 2
WARNING Note : See parts list for details of circuit board
Components having special characteristics are marked and must be replaced with parts having component parts.
specifications equel to those originally installed.
VT83660
12 12
DGC1B DGC1B
<Page 6> DGC1B

DGC1B OVERALL CIRCUIT DIAGRAM5/5 (FU, JACK1, KEY SENSOR, MA120, NF, NW)
1 1
JACK1
KEY SENSOR
OP AMP N.C.
OP AMP
N.C.
VOLUME
2 2
OP AMP
not installed
TREBLE BASS
OP AMP
OP AMP
CPU (FLASH)
3 CPU1
3
not installed
to MN-CN102
(Page 2: C-11) OP AMP
MN-CN104
(Page 2: H-11) Transistor Transistor
OP AMP Array Array
L/L+R
4 4
AUX IN
INVERTER
R
SYSTEM RESET
L/L+R Photo Coupler OP AMP
OPERATIONAL
AUX OUT
POWER AMP
5 R 5
to MN-CN2
(Page 2: B-3)
to PK-CTL-CN02
(Page 5: K-8)
N.C.
INVERTER
KSN05A-V858590
6 WG54610 6
not installed
NW NJM7820FA (X6794A00)
REGULATOR +20V 1A
NJM79M12FA (XD343A00)
REGULATOR -12V
NJM78L05UA (XJ598A00)
REGULATOR +5V
NJM78M12FA (XJ602A00)
REGULATOR +12V
µPC24A05HF (XM967A00)
REGULATOR +5V
NJM79L05UA (XN086A00)
REGULATOR -5V
MAINS power switch PWB(DI unit): 2 MA120: IC004 MN: IC103 NJM7805FA (XJ607A00) CONTROLLER: IC006 MN: IC104
REGULATOR +5V
TWEETER L MA120: IC003
AC PK-CTL: IC03
INLET 1
1 2
2
MA120 REGULATOR +5V
WOOFER L
32
1
3 3
V525130 32
1: IN 1: OUTPUT 1: OUTPUT 1 1: OUTPUT 1: INPUT 1: COMMON
1
FG 12 2: GND 2: INPUT 2: COMMON 2: COMMON 2 2: COMMON 2: INPUT
3 3
7 N.C. 3: OUT 3: COMMON 3: INPUT 3: INPUT 3: OUTPUT 3: OUTPUT 7
NW M5237ML (XP154A00) SI-3051N (XQ437A00) µPC29M33T-E1 (XU965A00) 2SJ278MYTR-E (VZ427900) HSC119 SC79 (V5734900) EC10DS4-TE12L (VN681100)
REGULATOR +3.3V REGULATOR +5V REGULATOR +3.3V FET DIODE DIODE 1.0A 400V
DSP: IC012, 013 MA120: IC001 µPC29M05AT (X4458A00) KEY SENSOR: FT001,002 CONTROLLER: D0009 PK-CTL: D3
MA120: IC002 REGULATOR +5V
TWEETER R MN: IC024 CONTROLLER: IC038 4
DB: IC2, 3
NF REGULATOR +5V
4
1
2
2 1
! WOOFER R 3
to MN-CN103 V525130 1
2 2
3 1: INPUT 1: GATE 1
(Page 2: A-8) 1: OUTPUT 1: GND 2 2: GND 2: DRAIN
12 1
2: COMMON 3 2: OUTPUT 3: OUTPUT 3: SOURCE 1: CATHODE 1: ANODE
3 4: GND(Fin) 2: ANODE
3: INPUT 3: INPUT 4: DRAIN 2: CATHODE
to PWB-CB1 D1F60 (VS201100) RLS-73 TE-11 (VV925900) RLS-73 TE-11 (VV925900) D5SBA20 (VK421800) FMU-12R (VN399400) FMU-36S (VN399500)
(Page 5: B-10) DIODE 1.0A 600V DIODE DIODE DIODE STACK 6.0A 200V FMU-12S (VN399300) DIODE STACK 20.0A 600V
8 DB: D1, 2 CD PANEL: DL,DR KEY SENSOR: D0080 D3SBA20-7103 (VQ111500) DIODE STACK 5.00A 200V PWB(PW unit): 2 8
PK-CTL: D3 CONTROLLER: D0001-0008,010 MN: D0002-0005 DIODE STACK 4.0A PWB(DI unit): 4, 5
DSP: DMI01 PK-CTL: D1, 2, 4 MA120: DB001, 002
!
POWER AMP. 60W PASW: D01-16
WG00060
1
1 1
2
1: ANODE 2 1: ANODE 2 1: ANODE

!
2: CATHODE 2: CATHODE 2: CATHODE
POWER
D5LC40 (VN715800) RBV-606 (VN932100) S1NB20 (VR253700) RD62P (VP615600) UDZS33B (VU173800) 2SC1815 (IC1815M0)
TRANSFORMER DIODE STACK 5.0A 400V DIODE STACK 6.0A 600V DIODE STACK 1.0A 200V ZENER DIODE 62V ZENER DIODE 33V TRANSISTOR
3 2 PWB(PW unit): 4 D5SBA60 (VN953300) MA120: DB003 PK-CTL: ZD1 CONTROLLER: ZD1, 2 JACK1: TR01
DIODE STACK 5.0A 600V MA120: TR002-004
PWB(DB unit): 2
9 9
NC 1
K
A
2 2
A: BASE 3 1: EMITTER
4 1
K: COLLECTOR 1: ANODE 12 2: COLLECTOR
NC: 2: CATHODE 1 3 3: BASE
(Primary) (Secondary)
2SC1815 (IC1815M0) 2SC1740S (IC174020) 2SC2603 (IC260320) 2SD438 (ID043820) DTA114ES (VD678500) UN4111 (VH800700)
TRANSISTOR 2SC3311ARA (VH800600) 2SB560E (IB056020) 2SA1015 (IA101590) DIGITAL TRANSISTOR DIGITAL TRANSISTOR
PEDAL DRIVE: TR3 TRANSISTOR TRANSISTOR TRANSISTOR PWB: Q0001 PWB: Q0001
PWB: Q0002, 0013, 0017 PWB: Q0003 PWB: Q0003, 0009 PWB: Q0010, 0016
POWER AMP. 60W
10 : Ceramic Capacitor 10
2 2 2
FU : Semiconductive Cera Cap 3 1: EMITTER 3
1
1: EMITTER 1: EMITTER 1: EMITTER
1
1: GND 3
1
1: EMITTER
12 2: COLLECTOR 2 3 2: COLLECTOR 12 2: COLLECTOR 12 2: COLLECTOR 2 2: OUT 2 3 2: COLLECTOR
1 3 3: BASE 1 3: BASE 3 3: BASE 3 3: BASE 3 3: IN 1 3: BASE
: Mylar Capacitor
2SA1451A (VJ828100) 2SA1162-Y (VJ927200) 2SD1792 (VM610600) 2SA1321 (VN931900) 2SC3263 (VN137600) 2SD1913 (VC407900)
: Metal Oxide Film Resistor 2SC4793 (VQ116500) TRANSISTOR TRANSISTOR 2SC3334 (VN932000) TRANSISTOR TRANSISTOR
TRANSISTOR MN: TR004 PEDAL DRIVE: TR1, 2 TRANSISTOR PWB(PW unit): 3
PWB(DI unit): 3
: Metal Film Resistor DSP: TR001 MA120: TR001 PWB: Q0011, 0012, 0014, 0015
MN: TR008 PWB: Q0008
3
to CONTROLLER-CN001 1
(Page 3: B-8) 2
3
1: BASE 1 1: BASE
REGULATOR +12V 12 1: BASE 1: EMITTER 1: BASE 1: BASE
to PWB-CB6 2: COLLECTOR 2: EMITTER 3 2: COLLECTOR 12 2: COLLECTOR 1 2 2: COLLECTOR 12 2: COLLECTOR
3 3
11 (Page 5: H-10) Note : See parts list for details of circuit board
12
3
3: EMITTER 2 3: COLLECTOR 3: EMITTER 3 3: BASE 3: EMITTER 3: EMITTER 11
component parts. 2SA1006B (VN838200) 2SC2412K(VV556400) 2SA1037AK(VV556500)
2SC2336B (VN838300) TRANSISTOR TRANSISTOR
TRANSISTOR CONTROLLER: TR001-007 DSP: TR002
PWB(PW unit): 5 KEY SENSOR: Q0080 PK-CTL: T1
PWB: Q0008 MN: TR003, 006, 007 3
4 PK-CTL: T2, 3
3
WARNING
REGULATOR –12V 2 1
V525850 VT14320 3 Components having special characteristics are marked and must be replaced with parts having 1: BASE 3
2 1 1: EMITTER
3
2: COLLECTOR 2 2 1: EMITTER
specifications equel to those originally installed. 3: EMITTER 2: BASE 2: BASE
12
3 4: FIN 1 3: COLLECTOR 1 3: COLLECTOR
12 12
DGC1B DGC1B

DGC1B e

Uploaded by

Copyright:

Available Formats

DGC1B e

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DGC1B e

Uploaded by

Copyright:

Available Formats

TM

PP 008612 HAMAMATSU, JAPAN

IMPOR TANT NOTICE

WARNING: CHEMICAL CONTENT NOTICE!

PROTECTION OF EYES FROM LASER BEAM DURING SERVICING

CLASS 1 LASER PRODUCT

Laser Diode Properties

WARNING Laser Safety

Do not disassemble the CD drive unit.

Type Advanced Wave Memory 2 (AWM2)

Function & Controls

Amplifier, Speakers & Foot Controller

AUX OUT AUX IN VOLUME BASS TREBLE

AUX OUT AUX IN VOLUME BASS TREBLE

q AC LINE INLET y BASS knob

q [STANDBY/ON] button !2 [REC] button

q CD CONTROL connector t TO CONTROL CABLE FOR PIANO connector

* Available on the remote control, but not on the

CIRCUIT BOARD LAYOUT

Bottom view MA120 assembly

Right side view

Key Sensor unit

Key drive unit

Control assembly Pedal drive unit

1. Control Unit (Time required: About 2 minutes)

• Control Unit (DKC60RCD)

2. Top Cover CD 5. DSP Circuit Board

Top cover CD [C302G] [C232G]

ATAPI (DA) [C231G]

[C211G] [C222G] [C211G] [C232G]

Top cover CD [C302G] Panel

[C302G] [74G] [61GA] [73] [72G]

13. Sounder Assembly

[51GA]: Bind Head Tapping Screw-P 2.6X8 MFZN2B3 (WE973600)

14-5 Pull out the action unit towards you. (Fig.7)

15. Pedal Lyre Assembly

17. Yoke Cover B and Yoke Cover C

[151GF] [151GD] [83S] [151GD] [151GC] [151GA]

Yoke cover C CTRL G [151GB]

[83S]: Truss Head Tapping Screw-1 4.0X30 MFZN2B3 (WF110100)

Pedal lever hook

Damper pedal Yoke cover B

Pedal lever hook

Sostenuto (Base damper) Yoke cover A (Photo.8)

Damper lifting rod

Damper pedal Yoke cover C

19. Plunger Assembly and Coil Assembly

[101G]: Cap Screw 4.0X40 MFZN2W3 (WG489900)

[101G] x 5 Upper yoke [101G] x 5 Upper yoke [101G] x 6 Upper yoke

Felt (Black) Felt (White) Upper yoke

Upper yoke Plunger assembly

20. Key Sensor Unit

Key sensor unit

Sutter assembly (WC368200) (Fig.12)

21. KEY SENSOR Circuit Board

[51GB]: Bind Head Tapping Screw-S 3.0X4 MFZN2W3 (WG242400)

22. Pedal Drive Unit 23. PEDAL DRIVE Circuit Board

Pedal drive unit

[14G]: Bind Head Screw 4.0X6 MFZN2B3 (WE878400)