JZ LSR Catalog All

LIQUID SILICONE RUBBER
Product Catalog
One-stop service support to solve your silicone rubber

material procurement and application problems
One-stop service support to solve your silicone rubber material
procurement and application problems
Company Profiles
JZ Supply Management Limited is a supply chain management company specializing in providing China's leading
insulation, fireproofing and environmental protection polymer materials and products. With the upgrading of market
demand, JZ Supply Management has upgraded to a system solution provider on the basis of traditional material
supplier, combining product output with system service solutions, continuously studying customers and market
demand, building a modern material and product service provider model, and bringing a new material and product
procurement experience to customers, thus realizing "professional silicon material and product supply,
comprehensive system service".
Our main business products.
I. Silicone rubber materials: silicone materials mainly used for the production of molded, extruded and injected
silicone rubber products. Including the following series of silicone materials.
⚫ Silicone rubber for electronic and electrical appliances.
⚫ Silicone rubber for sports goods.
⚫ Silicone rubber for adult products.
⚫ Silicone rubber for kitchen products.
⚫ High temperature resistant silicone rubber.
⚫ Environmental protection flame retardant silicone rubber.
⚫ Silicone rubber for automotive products.
⚫ Silicone rubber for mother and child products.
⚫ Medical and food grade silicone rubber.
Ⅱ. Silicone rubber products
⚫ Silicone rubber hoses for automobile, truck, ship and other engines.
⚫ Mainly used in bus, truck, automobile and industrial market. The products meet the strict requirements of Euro 5
and above. Our partners use the best quality raw materials and the latest processing technology and production
equipment to produce and test according to the most stringent industry standards.
The silicone rubber hoses we supply are made of high-quality silicone rubber, fluor silicone, high temperature
resistant silicone sandwich polyester fiber, aramid cloth, fluorocarbon lining various high and low temperature
resistant, oil resistant automotive breakdance hoses, so that your engine can work under the most severe usage
conditions.
⚫ Automotive electrical harness, connectors, sealing coils, seals and other sealed precision silicone parts.
⚫ Silicone rubber mother and baby products, pacifiers, bottles and other food and silicone rubber daily necessities.
⚫ Medical equipment: Anti-reflux series of intravenous indwelling needle.
III . Graphite fireproof materials.
⚫ Flame-retardant ring: used for fireproofing and blocking of plastic pipe penetrations.
⚫ Firestop: used for fireproofing and sealing of doors and windows
⚫ Fireproof sponge: with the characteristics of heat preservation, heat insulation, shock absorption, flame retardant,
breathable performance, etc., used for fireproofing and sealing of cable bridges, air conditioners and other
building penetrations.
JZ Supply Management always insists on innovation and advances with the times to provide systematic solutions for
our customers. We always uphold the enterprise spirit of "honesty, truthfulness, innovation and development" to
provide customers with quality and satisfactory products and services!
2
Silicone Rubber Material Solution Provider
With the upgrade of market demand, JZ Supply Management upgraded to a system solution
provider on the basis of traditional material supplier, combined product output and system
service solution, continuously researched customer and market demand, built modern material
service provider model, brought new material purchasing experience to customer, thus realizes
"professional silicon material supply, whole system service".
Professional material supply

Full technical support
Providing
material
solutions
Customization of Personality
System after-sales service
Products
3
Silicone Rubber Solution Provider Service Process
We provide you with systematic solutions and support services from project evaluation to
material selection, production process planning, auxiliary equipment configuration,
production staff technical briefing and late material problem solving, one-stop solution to
your material procurement problems.
Professional
Customer needs Assessment
Material Selection
Improvements on
Material Preparation Material Customization
demand
Material supply
Production Schedule Sample testing Transport delivery
Use Guide
Operation Manual Usage specifications Production processes
Technical Support
Performance
Technical Difficulties Problem solving
improvement
Service Support
Customer Service
Export
4
Customization Individual Products

We can provide you with personalized material solutions for different products and production
processes, as well as professional material development and non-standard product selection
and production, 100% customized for you. At the same time, we can also provide you with
material development services, where customers only need to provide material application
requirements, and JZ Supply Management can develop new materials for you individually.
Worldwide sales
Development of new and improved

materials for you according to your actual Common Choice for More Than 1,000 Independent research and development
needs Corporate Customers with core technologies
5
One-stop Service Supports Resolve

All Your Worries And Troubles
3. Service
support
2. Production Feedback on issues

support Material issues
handling
Mold selection
Production process control
1. Material
Material usage
selection specifications
Finished product
production support
Material Properties
Material Advantages
Suitable for Products
Custome
r
We provide you with more systematic

and complete material and related
Customer Technical
support solutions to better solve your Salesperson
Sales Service Advisors
person
material procurement and production
application problems.
Supply Technical
Product tracking
management Support
Purchasing
We provide you with a professional Delivery control Troubleshooting
Management
Project Team
project team that is dedicated to you
throughout the entire process, with a Question
feedback
clear division of labor and a clear
process that will meet your individual
needs as quickly as possible.
Project
Team
6
Eliminating Traditional Material Supplier Role

Upgrade Service Provider Mode
Product System Solutions Project Team Services

Programmer
Specialized Product Set up a dedicated

Solution Output for project group as a unit
Customer to serve the customer
Personalization and better serve the
customer
customer
Innovatlons To Resolve The Purchasing Problems Thoroughly
R&D Innovation
Product innovation Service Innovation
Innovative Technology
Product Solution Development Service model upgrade
Development
Providing a more product- Providing a more personalized Strength Support

friendly solution programmer service
7
Testing
Our dedicated factory is equipped with an extensive range of test equipment which allows us to
monitor, maintain and provide materials and product to both customer and
our own unique and demandingspecications.

All product used in our hose building process is supplied with customer ceritfication. We carry out
our own in house testing to verify batch to batch consistency.
In addition, We are able to carry out product testing. Our factory has the facilities to carry out burst
pressure testing, heat ageing, vibration and flex testing and pressure cycle testing.
8
Liquid Silicone Rubber
A Liquid Silicone Rubber material is a two-part platinum-cured elastomer that can be injected into a mold
cavity to manufacture a part. LSR is very versatile in the elastomer industry and is seen across a whole
spectrum of parts from consumer products to medical devices and everything in between.
The operating temperature range for LSR can be

between -65°C to150°C, which short peaks to 260°C.
With post cure, it offers very low compression set
and can meet low outgassing down to TML < 1
percent and CVCM < 0.1percent. These polymers
are translucent, which means they can be pigmented
to match any color requirement. LSR also has quick
cycle times and less raw material handling — leading
to quicker delivery times and greater throughput.
To help manufacturers unleash the full potential of this material, we compiled everything you need to know
about liquid silicone rubber.
Making the polymer

There are a couple of different ways to make the base polymer for an LSR. Like all elastomeric materials,
there needs to a polymerization reaction to create molecular chains. Vinyl and methyl siloxane groups are
polymerized to form polydimethylsiloxane chains. These chains provide strength and flexibility to the
material. This process will change it from the liquid, almost watery starting components, to the more
viscous basic form of the LSR. It’s in here that a lot of other properties can also be designed into the
material, as well.
Once that main polymer gets created, the material gets reinforced normally with fumed silica. Unlike the
organic materials where the filler of choice is carbon black or clays (pigmented materials), LSR materials
use other silicates to reinforce the polymer chains and add tensile strength to the material.
From here, the material is split into two halves and the catalyst (platinum) and crosslinker are added to
separate halves. This greatly increases the shelf life of these materials. When blended together, there’s a
short working life of LSRs, averaging around eight hours. By splitting these halves, the material can
potentially be stored for years with little worry of it curing during that time.
9
Types of LSR
There are many types of LSR materials. Some include:
Medical grades: In the later stages, an LSR will get

stripped of extractable for medical applications,
which have very sensitive requirements to avoid
interacting with tissues. Removing the extractables
also increases the strength of the material.
These grades are typically broken down to restrictive
(implant less than 30 days) and unrestricted (implant
greater than 30 days). The composition of these
grades are normally the same, but it is the level of
biocompatibility testing that was performed on the
material. Many vendors establish FDA master files to
help customers get approval in their medical device.
Self-lubricating: Incompatible fluids can be mixed into
the components. Once the silicone cures, this material will bloom to the surface to create a slippery surface.
Then, 1.5 to 3 percent of a phenyl fluid is added to the silicone depending on the rate of fluid the customer
wants to bloom.
Conductive: Conductive-grade carbon black is added to the LSR components. These grades have very
good mechanical properties compared to metal particle filled silicones and can get down to 9 ohm-cm
volume resistivity.
Self-bonding: Adhesion promoters are added. This offers primerless adhesion to various substrates. The
material works well on glass filled nylons, stainless steel, aluminum and polysulfones. It offers a perfect
solution for composite seals to reduce assembly components or provide even better sealing between two
mating components.
Radio Opaque: Barium sulfate is added to allow the silicone part to be detected under X-Ray. This works
well for medical applications such as wound drains and catheters.
FLSR: Fluorine is reacted to the polymer chain and can be blended typically at 60/40 ratio or a 100 percent
fluorosilicone LSR (FLSR) polymer. The benefit is a highly resistant silicone for fuels and oils. Typically,
these FLSR won’t meet current MIL standards for fluorosilicone. At the present time there is no FDA food
grade or medical polymers.
Flame Retardant: Most LSR rubber will meet a UL 94 HB rating without any additives. Higher ratings, like
V1 or VO, require additives that release water when decomposed.
Fast Cure: Just like with an ethylene propylene where a terpolymer with double bonds is added, a
manufacturer of LSRs can determine the level of crosslinking of the elastomer by controlling the amount of
functional groups that are added as cure sites in the material. This results in higher reactivity to produce
10
very quick cycle times for mass production of silicone parts.

The LSR manufacturing process
When a high-consistency silicone is brought into our
facility, it almost always needs some sort of labor to
transform it into a moldable size and shape. In most
cases, all that’s required is the material be sized and
shaped for the mold cavity — which is referred to as
performing the material.
Some materials have an extra step of adding cures to

the material (which were left out to increase the shelf
stability of the material). An LSR removes all of those
steps. Here is a look at the LSR manufacturing process:
1. LSR A + B components typically come in a 5 gallon pail or 55 gallon drum. A process controlled pumping
kit presses down on the buckets to force the material into static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed
together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed
to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either
an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick
efficient process, that typically averages 30 seconds.
4. Conversely, with an organic material or high consistency silicone, the average cycle time to get a part
made is around six or more minutes. Peroxide cured materials take even longer, commonly around nine
minutes. LSR can lead to a significant cost savings in labor over a high consistency silicone material.
5. Secondary steps like post bake can help reduce volatilities and improve compression set. And the
deflashing process removes unwanted flashing. It’s then cleaned to remove foreign material and packaged
for shipment.
For more information on liquid silicone rubber, connect with us on Twitter or LinkedIn or contact our
engineering team for assistance.
11
Liquid Silicone Rubber Applications
Liquid Silicone Rubber Package & Transportation & Storage
JZ Supply Management supplies liquid silicone rubber as standard in plastic drums wrapped in PE film
with a 1:1 mass mix of A:B. Small drums of 20 kg each and large drums of 200 kg each are available.
Package
20Kgs/Pail, 200Kgs/Drum.
Storage Condition
Room temperature less than 30°C, do not contact
water, avoid sun exposure.
Expiry Date
12 months, finish within 6 months is the best.
12
JZ-LSR20 AB SERIERS LSR

Features
This series applies to platinum cured addition type two-component common
precipitation liquid silicone rubber for injection molding process. !
• Fast curing speed, high efficient.

• Excellent impermissibility with color paste, easy coloring.
• Excellent rebound resilience.
• Excellent heat stability and weather fastness (used temperature: -60°C~200°C).
• Heat aging resistance.
• Excellent mobility and injection.
Applications
Common industry sundries, kitchen appliances, O ring, silicone rubber gifts and
toys.
Technical Data
Physical Measuring Test
Unit Data
Properties Equipment Method
Model JZ-LSR2020 JZ-LSR2030 JZ-LSR2040 JZ-LSR2050 JZ-LSR2060 JZ-LSR2070
Sub Sub Sub Sub Sub Sub
Appearance
transparent transparent transparent transparent transparent transparent
Viscosity Viscometer mPa.s 500,000 500,000 500,000 600,000 600,000 600,000
Shore Shore GB/T 531.1-
A° 20 30 40 50 58 67
Hardness Durometer 2008
Tensile Electronic
GB/T 528-2009 Mpa 5 0-5.5 6.5 6.5 5.5 5
Strength Tension Tester
Elongation At Electronic
GB/T 528-2009 % 500 450 400 300 250 200
Break Tension Tester
Tear Strength Electronic
GB/T 529-2008 KN/m 10 12 15 20 15 12
Die B Tension Tester
Processing Technic
Mixing Ratio 1:1 weight mixing.
Test Condition Mold temperature 120°C, cured time 5 minutes.
Package & Storage

Package 20Kgs/Pail, 200Kgs/Drum.
Storage Condition Room temperature less than 30°C, do not contact water, avoid sun exposure.
Expiry Date 12 months, finish within 6 months is the best.
13

Features
This series applies to platinum cured addition type two-component liquid
silicone rubber for injection molding process.

• Choose the hitting life (times) according to product requirements.
• Excellent rebound resilience,
• Excellent heat stability and weather fastness (used temperature: -60°C ~
200°C).
• Excellent mold release property.
• Stable product size.
Applications
Button and key of electronic products, all kinds of single key and sheet key.
ISO9001:2015 / REACH / RoHS
Technical Data

Unit Data
Sub Sub Sub Sub Sub Sub

Appearance
transparent transparent transparent transparent transparent transparent
Viscosity Viscometer Pas 500,000 500,000 500,000 600,000 600,000 600,000
Shore Shore
GB/T 531.1-2008 A° 20 30 40 50 58 67
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 5 5.5 6.5 6.5 5.5 5
Elongation Electronic
GB/T 528-2009 % 500 450 400 300 250 200
At Break Tension Tester
GB/T 529-2008 KN/m 10 12 15 20 15 12
Processing Technic
Package & Storage
14

Features
This series applies to platinum cured addition type two-component common fumed
sub transparent liquid silicone rubber for injection molding process.

• Excellent heat stability and weather fastness (used temperature: -60°C ~ 200°C).
• Yellow-stain resistance,
• Comply with FDA, RoHS, LFGB standards.
Applications
Common industry sundries, kitchen appliance, computer/mobile/pad related
products, O ring, Silicone rubber decorations, toys etc. ISO9001:2015 / REACH / RoHS
Technical Data

Unit Data
Model JZ-LSR6020 JZ-LSR6030 JZ-LSR6040 JZ-LSR6050 JZ-LSR6060 JZ-LSR6070 JZ-LSR6080
Sub Sub Sub Sub Sub Sub Sub

Appearance
transparent transparent transparent transparent transparent transparent transparent
Viscosity Viscometer mPa.s 800,000 800,000 850,000 850,000 900,000 900,000 1,000,000
Shore Shore
GB/T 531.1-2008 A° 20 30 40 50 58 68 78
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 5 6 7 8.5 7.5 6.5 6
GB/T 528-2009 % 600 650 650 580 450 350 150
GB/T 529-2008 KN/m 10 15 22 28 32 20 12
Processing Technic
Package & Storage

15

Features
This series applies to platinum cured addition type two- component common fumed
transparent liquid silicone rubber for injection molding process.

• Excellent light transmittance.
• Excellent heat stability and weather fastness (used temperature: -60 ° C ~ 200°C)
• Yellow-stain resistance.
• Low VOC.
Applications
Baby products like milk bottle, nipple, teethers, primary color kitchenware etc. ISO9001:2015 / REACH / RoHS
Technical Data

Unit Data
Appearance Transparent Transparent Transparent Transparent Transparent Transparent Transparent
Viscosity Viscometer mPa.s 800,000 850,000 850,000 900,000 950,000 950,000 1,100,000
Shore Shore
GB/T 531.1-2008 A° 20 30 40 50 58 68 78
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 6 6.5 7.5 9 8 6.5 6
GB/T 528-2009 % 750 6800 680 600 450 350 150
GB/T 529-2008 KN/m 10 15 25 30 35 25 12
Processing Technic
Package & Storage

16

Features
This series applies to platinum cured addition type two- component liquid
silicone rubber for injection molding process.

• Excellent hydrophobicity.
• Excellent rate of the permanent deformation.
• Excellent heat stability (application temperature: -60°C ~ 250 C).
• Color can be customized, common color: grey, red and black.
• Tracking and Erosion resistance: 1A 3.5.
• Excellent insulative and fire resistance.
• Excellent weatherability.
Applications
Cold-shrink wire and cable accessories, include low middle and high voltage. ISO9001:2015 / REACH / RoHS
Technical Data

Unit Data
Model JZ-LSR8240S JZ-LSR8240T JZ-LSR8050 JZ-LSR8240D JZ-LSR8240Z JZ-LSR8240P
Appearance Grey Grey Grey Grey Grey Grey
Viscosity Viscometer mPa.s 750,000 750,000 750,000 750,000 750,000 750,000

Shore Shore
GB/T 531.1-2008 A° 40 40 40 40 40 40
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 10 10 10 10 10 10
GB/T 528-2009 % 750 750 750 750 750 750
GB/T 529-2008 KN/m 10 25 30 35 25 12
Tracking & Erosion
Class 1A3.5 1A3.5 1A3.5 1A3.5 1A3.5 1A3.5
Resistance
Processing Technic
Package & Storage

17

Features
This series applies to platinum cured addition type two-component heat and oil
resistance liquid silicone rubber for injection molding process.

• Excellent mechanical property.
• Good compression set.
• Excellent heat stability (application temperature: -60°C ~ 350 °C ).
• Color can be customized, common color is original color.
• Excellent oil resistance, pass IRM901, 902, 903 test.
• Comply with related requirements of ASTM D2000.
Applications
Spare and accessory parts of automobile, new energy automobile, spaceflight
and rail traffic vehicle.
Technical Data
Physical Properties Measuring Equipment Test Method Unit Data
Model JZ-LSR8350HT JZ-LSR8360HT
Appearance Sub transparent Sub transparent
Viscosity Viscometer mPa.s 750,000 800,000
Shore Hardness Shore Durometer GB/T 531.1-2008 A° 50 58
Tensile Strength Electronic Tension Tester GB/T 528-2009 Mpa 9.5 10
Elongation At Break Electronic Tension Tester GB/T 528-2009 % 600 450
Tear Strength Die B Electronic Tension Tester GB/T 529-2008 KN/m 35 45
Processing Technic
Package & Storage

18

Features
This series applies to platinum cured addition type two-component sel lubrication
liquid silicone rubber for injection molding process.

• Excellent mechanical property.
• Good compression set.
• Excellent heat stability (application temperature: -60°C ~ 350°C).
• Color can be customized, common color is milk white.
• Excellent self lubrication ability, can last long time.
• Comply with related requirements of ASTM D2000.
Applications
Automobile, new energy automobile, spaceflight, water proof seal parts of rail traffic
vehicle light, other easy-plug products.
Technical Data
Physical Properties Measuring Equipment Test Method Unit Data
Model JZ-LSR83540SL JZ-LSR8350SL
Appearance Milk White Milk White
Viscosity Viscometer mPa.s 850,000 1,000,000
Shore Hardness Shore Durometer GB/T 531.1-2008 A° 40 50
Tensile Strength Electronic Tension Tester GB/T 528-2009 Mpa 7 7.5
Elongation At Break Electronic Tension Tester GB/T 528-2009 % 600 500
Tear Strength Die B Electronic Tension Tester GB/T 529-2008 KN/m 25 28
Processing Technic
Package & Storage

19

Features
This series applies to platinum cured addition type two-component common fumed high transparent liquid silicone
rubber for injection molding process.

• Excellent heat stability and weather fastness (used temperature: -60°C~200°C).
• Low VOC.
Applications
High transparent parts like swimming goggles frame, baby products etc.
Technical Data

Unit Data

High High High High High High High
Appearance
Transparent Transparent Transparent Transparent Transparent Transparent Transparent
mPa.
Viscosity Viscometer 800,000 850,000 850,000 900,000 950,000 950,000 1,100,000
s
Shore Shore
GB/T 531.1-2008 A° 20 30 40 50 58 68 78
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 5 6.5 7.5 9 8 6.5 6
GB/T 528-2009 % 600 680 680 600 450 350 150

GB/T 529-2008 KN/m 10 15 25 30 35 25 12
Processing Technic
Package & Storage

20

Features
This series applies to platinum cured addition type two-component common fumed high transparent liquid silicone
rubber for injection molding process.
• Fast Curing speed, high efficient.

• Excellent heat stability and weather fastness (used temperature: -60'°C~200 C).
• No-toxic, odorless and no by products.
• Excellent biocompatibility.
• Comply with FDA,ROHS,LFGB, biocapacity test standards.
• Low VOC.
Applications
ISO9001:2015 / REACH / RoHS
Medical apparatus and instruments like breathing mask, all kinds of sacculus, catheter, human body artificial limb etc.
Technical Data

Unit Data
High High High High High High
Appearance
Transparent Transparent Transparent Transparent Transparent Transparent
Viscosity Viscometer mPa.s 850,000 850,000 900,000 950,000 950,000 1.100,000
Shore Shore
GB/T 531.1-2008 A° 30 40 50 58 68 78
Hardness Durometer
Tensile Electronic
GB/T 528-2009 Mpa 6.5 8.5 10 10 9 6
GB/T 528-2009 % 680 680 600 450 350 150
GB/T 529-2008 KN/m 15 25 40 45 25 12
Processing Technic
Package & Storage

21
LSR7XX Liquid Silicone Rubber REGISTERED
Features:
⊙ FDA Grade
⊙ LFGB Grade
⊙ High Transparent
⊙ High Tear Resistance
Storage :
⊙ Store at room temperature in ventilated and cool place
⊙ Transport according to non-hazardous chemicals and should keep away
from pollution source, sunshine and wate.
Application and Packaging
LSR7XX INJECTION MOLDING SILICONE RUBBER COMPOUND

⊙ For injection molding.
⊙ The manufacture of automotive, household and medical industries.
LSR7XX Series products are high flow liquid injection molding silicone rubber compound formulated
to provide good result when making injection molding parts.
These materials is compliant with US FDA 21 CFR 177.2600 and German Food, Articles of Daily Use and Feed
Code of September 1,2005(LFGB), Section 30 and BfR recommendation.
Typical properties:
Item Appearance LSR730 LSR740 LSR750 LSR760 LSR770

Application Transparent Transparent Transparent Transparent Transparent
Rate(3.2m m,90psi) A:300 B:310 A:300 B:310 A:300 B:310 A:290 B:280 A:260 B:270
g/min
Pot life (25°C) 3 3 3 3 3
days
A:B Mix Ratio 1:1 1:1 1:1 1:1 1:1
Hardness(JIS) 30 40 50 60 70
JIS (A)
Tear Strength Die B(ISO 34) 25 28 32 35 37
kgf/cm
Tensile Strength(ISO/DIS -37) 70 80 85 80 75
kgf/cm2
Elongation(ISO/DIS -37) 650 550 450 450 400
%
Specific Gravity(25°C) (ISO- 1.11 1.12 1.12 1.13 1.13
g/cm3
2781)
Com pression Set (ASTM-D395) 18 20 22 25 26
%
TS2(150°C)(ASTM-D5 2 89 ) 23 24 23 25 23
second
TC90(150'C)(ASTM-D52 8 9) 47 46 47 48 45
second
Curing Condition:
Press cure 140℃/3mins
22
TLR132 Silicone Resin Coating REGISTERED
Features：
⊙ Low viscosity Coating Grades
⊙ Non-Solvent Type
⊙ Excellent Weather Resistance
Storage :
⊙ Transport according to non-hazardous chemicals and should keep away from
pollution source, sunshine and wate
Application industry
TLR132 SILICONE RESIN COATING

Silicone resin coating.
Manufacture of high temperature wire and glass sleeve coating.
TLR132A/B is a non-solvent type liquid two component silicone resin coating material. It is widely used in high
temperature wire, and glass sleeve coating.
Typical properties:
Property Unit TLR132A/B

Appearance Transparent/Milky
Viscosity CPS 18000
Hardness shore A(JIS) 33
A:B (mix ratio) 100:2
Solid Content % 100
Pot Life (days) Days >6
TC90 (150oC) Second 62
Curing condition 180oC/3mins
Adhesion Strength kgf/cm 0.26
23
Platinum Catalyst REGISTERED
TL-C 25 A & TL-C 25B is two-part addition curing catalyst for silicone rubber.
The system bringslower curing temperature and shorter curing time than peroxide curing agent. The catalyst canmeet
the standard of FDA and LFGB.
Remark:
1. The temperature in operating open mill with platinum catalyst should not exceed 60°C.
2. The shelf life of the mixed compound is not over 24 hours under room temperature.
Storage condition
1. Keep away from high temperature, direct sunlight, acidic materials and flammable material.
2. Shelf life is 6 months for storage in dry place and temperature under 25°C.
Typical Properties
Part No. TL-C25 A TL-C25 B
Appearance Translucent Translucent

Specific gravity(g/cm³) 1.19 0.98
Recommended dosage : TL-C 25 A:2.0% TL-C 25B:1.5%

Curing condition : 120℃*6mins
Testing items Result

Appearance Transparent
Hardness shore A(JIS) 70
Tear Strength (Die B) kgf/cm 49.09
Tensile Strength ( Mpa) 9.37
Elongation (%) 650
Specific gravity (g/cm³) 1.193
Compression set ( 100°C*22 hours) ( %) 7.12
TC 90(120°C*3mins) min 62
For Example : add platinum catalyst into fumed silica silicone base - E70
Mixing Instructions :
1)Take 2x10kg silicone base to mill completely until it becomes soft.
2)Add TLC 25 A 2% mill with 10kg base (it calls Part A) and add TL-C25B 1.5% mill withanother 10kg base (it calls Part
B) completely.
3)Take Part A mix with Part B and mill together completely, it calls the compound.4) Leave the compound to cool
down for 5-6 hours before using it in molding or extruding.
24
High Purity Dimethyl Fluid REGISTERED
Features
⊙ High Purity
⊙ No Inorganic Salt
⊙ Low Volatile content
⊙ Available Viscosity Range: 100~600,000mpa.s
Storage :
DMF dimethyl fluid

Manufacture of cosmetic industry, elastomer industry, electronic industry
DMF is high purity dimethyl fluid. It contains no inorganic salt suitable for use in
various applications including elastomer and plastic lubricant, electrical insulation
fluid, mold release agent and thread industries.
Typical properties:
Properties Unit DMF-100 DMF-350 DMF-500 DMF-1000

Appearance Colorless Colorless Colorless Colorless
Viscosity (25℃) cps 80-120 300-400 450-550 900-1100
Flash Point(pen-cup) °C≥ 290 300 300 300
Density (25℃) g/cm³ 0.96-0.97 0.965-0.975 0.965-0.975 0.965-0.975
Volatile(1500℃/3hr) % <1.5 <1.5 <1.5 <1.5
Typical properties:
Properties Unit DMF-10000 DMF-12500 DMF-60M DMF-600M
Appearance Colorless Colorless Colorless Colorless
Viscosity (25℃) cps 9500-10500 12000-13000 55M-65M 550M-650M
Flash Point(pen-cup) °C≥ 320 320 320 320
Density (25℃) g/cm³ 0.97-0.98 0.97-0.98 0.975-0.985 0.98-0.99
Volatile(1500℃/3hr) % <1.5 <1.5 <1.5 <1.5
Packing : 200kg drum or 1000kg IBC

25
High Purity Vinyl Fluid REGISTERED
Features
⊙ High Purity
⊙ No Inorganic Salt
⊙ Low Volatile content
⊙ Available Viscosity Range: 100~165,000cSt
Storage :
TVF HIGH PURITY VINYLFLUID

TVF is high purity vinyl polymer. It contains no inorganic salt suitable for use in
Electronic and Electrical Industry
Typical properties:
Parameter TVF-100 TVF-200 TVF-500 TVF-1M TVF-10M TVF-65M TVF-100M TVF-165M

Appearance Colorless Colorless Colorless Colorless Colorless Colorless Colorless Colorless
Odor odorless odorless odorless odorless odorless odorless odorless odorless
Volatile content (wt%)
<0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5 <0.5
(150℃, 3h)
Viscosity (25℃, cSt) 90-110 180-220 450-550 900-1100 9000-11000 60000-70000 90000-110000 150000-180000
Vinyl content (mmol/g) 0.38-0.42 0.24-0.28 0.14-0.17 0.1-0.14 0.045-0.065 0.02-0.04 0.015-0.03 0.01-0.03
D4 (%) <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1
D5 (%) <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1

D6 (%) <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1 <0.1
Mono Vinyl Silicone Fluid

Parameter TVMF-500 TVMF-1000 TVMF-10M
Appearance Colorless Colorless Colorless
Odor odorless odorless odorless
Volatile content (wt%) (150℃, 3h) <0.5 <0.5 <0.5
Viscosity (25℃, cSt) 450-550 900-1100 9000-11000
Vinyl content (mmol/g) 0.09-0.12 0.05-0.08 0.03-0.06
D4 (%) <0.1 <0.1 <0.1

D5 (%) <0.1 <0.1 <0.1
D6 (%) <0.1 <0.1 <0.1
26

JZ LSR Catalog All

Uploaded by

Copyright:

Available Formats

JZ LSR Catalog All

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JZ LSR Catalog All

Uploaded by

Copyright:

Available Formats

LIQUID SILICONE RUBBER

One-stop service support to solve your silicone rubber

Silicone Rubber Material Solution Provider

Professional material supply

Silicone Rubber Solution Provider Service Process

Production Schedule Sample testing Transport delivery

Operation Manual Usage specifications Production processes

Customization Individual Products

Development of new and improved

One-stop Service Supports Resolve

2. Production Feedback on issues

We provide you with more systematic

Eliminating Traditional Material Supplier Role

Product System Solutions Project Team Services

Specialized Product Set up a dedicated

Innovatlons To Resolve The Purchasing Problems Thoroughly

Providing a more product- Providing a more personalized Strength Support

our own unique and demandingspecications.

Liquid Silicone Rubber

The operating temperature range for LSR can be

Making the polymer

Medical grades: In the later stages, an LSR will get

very quick cycle times for mass production of silicone parts.

Some materials have an extra step of adding cures to

Liquid Silicone Rubber Applications

Liquid Silicone Rubber Package & Transportation & Storage

JZ-LSR20 AB SERIERS LSR

• Fast curing speed, high efficient.

Test Condition Mold temperature 120°C, cured time 5 minutes.

Package & Storage

Expiry Date 12 months, finish within 6 months is the best.

JZ-LSR21 AB SERIERS LSR

• Fast curing speed, high efficient.

Physical Measuring Test

Model JZ-LSR2020 JZ-LSR2030 JZ-LSR2040 JZ-LSR2050 JZ-LSR2060 JZ-LSR2070

Sub Sub Sub Sub Sub Sub

Viscosity Viscometer Pas 500,000 500,000 500,000 600,000 600,000 600,000

Test Condition Mold temperature 120°C, cured time 5 minutes.

Package & Storage

Package 20Kgs/Pail, 200Kgs/Drum.

Expiry Date 12 months, finish within 6 months is the best.

JZ-LSR60 AB SERIERS LSR

• Fast curing speed, high efficient.

Physical Measuring Test

Model JZ-LSR6020 JZ-LSR6030 JZ-LSR6040 JZ-LSR6050 JZ-LSR6060 JZ-LSR6070 JZ-LSR6080

Sub Sub Sub Sub Sub Sub Sub

Mixing Ratio 1:1 weight mixing.

Test Condition Mold temperature 120°C, cured time 5 minutes.

Package & Storage

Expiry Date 12 months, finish within 6 months is the best.

JZ-LSR80 AB SERIERS LSR

• Fast curing speed, high efficient.

Physical Measuring Test

Appearance Transparent Transparent Transparent Transparent Transparent Transparent Transparent

Mixing Ratio 1:1 weight mixing.

Test Condition Mold temperature 120°C, cured time 5 minutes.

Package & Storage

Expiry Date 12 months, finish within 6 months is the best.

JZ-LSR82 AB SERIERS LSR