Filtro Desecante 023Z4824
Filtro Desecante 023Z4824
Filtro Desecante 023Z4824
AI192386435941en-001404
Hermetic filter drier Type DML/DMLE and DCL/DCLE
Features
The Shell
• DML and DCL are PED approved for PS 46 bar
• DMLE and DCLE are PED approved for PS 50 bar
• Available with solder (Cu-plated steel connectors) and flare connections
• Corrosion resistant powder-painted finish. Special coating for marine applications available upon request
• Allows installation with any orientation provided the arrow is in the flow direction
• Available in sizes 1.5 – 75 cubic inches
The Filter
• 25 μm (0.001 in.) filter provides high retention with minimal pressure drop
• Thermally stable up to 120 °C
Application
Intro-diagram
ELIMINATOR® Hermetic filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid
particles.
With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive
impurities.
Figure 1: Application
R64-2107.10
Danfoss
AKS EKC
EVR
TCAE
SGN GBC
DML / DMLE / DCL / DCLE GBC
Product specification
Technical data
Table 1: Technical data
Flare connection Solder connection(cu-plated steel connectors) Solder connector(pure copper)
(1)
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
Temperature range:
-40 – 70 °C
Maximum working pressure DML/DCL: 46 bar
(1)
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
Temperature range:
-40 – 70 °C
Maximum working pressure DML/DCL: 46 bar
(1)
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
Temperature range:
-40 – 70 °C
Maximum working pressure DMLE/DCLE: 50 bar
(1)
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
Temperature range:
-40 – 70 °C
Maximum working pressure DMLE/DCLE: 50 bar
Conversions
[1 kg of refrigerant × (Initial PPM of water − Final PPM of water)]
Drops of water =
50
See ARI standard 710-86 for recommended initial and final PPM values for different refrigerants.
Identification
Table 8: Identification
Type Codes Description
Filter drier D Drier
C 80% Molecular Sieve / 20% activated alumina
Solid core
M 100% Molecular Sieve core
L Liquid line
Application
E Flammable refrigerants
3 3 in.3
5 5 in.3
8 8 in.3
16 16 in.3
Size (volume) 30 30 in.3
38 38 in.3
41 41 in.3
60 60 in.3
75 75 in.3
D Filter drier
C Solid core
L Application
05 Size (volume)
3 Connection (filter connection in 1⁄8 of an inch increments)
s Connection type
Selection
Type selection is made considering the application
Table 9: Selection
Refrigerant and oil types DCL DML
HFO Recommended Recommended
HC (1) Recommended Recommended
Refrigerant
HFC Recommended Recommended
HCFC Recommended Recommended
Mineral or AB Recommended Recommended
Oil POE or PAG, pure Recommended Recommended
POE or PAG, with additives Not recommended (2) Recommended
(1)
Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants now.
(2)
DCL Hermetic filter driers contain activated alumina, which is a polar material used for acid adsorption. Many oil additives are also polar
substances and can be adsorbed by the activated alumina, rendering them useless, and reducing the drier’s acid capacity, though this is not
harmful to the system.
Design
Table 10: Design
DML / DMLE / DCL / DCLE 1.5 DML / DMLE / DCL / DCLE 1.5
1 2 3 4 5 7
1 2 3 4 5 7
23Z7012
Danfoss
23Z74.10
Danfoss
DML / DMLE / DCL / DCLE 08, DML / DCL 16 DML / DCL 30, DML / DCL 41
23Z22.11.13
Danfoss
The relatively large diameter of the hermetic filter drier means that the liquid flow velocity is suitably low and the
pressure drop minimal.
Powder formation is eliminated because the solid core grains are bonded and cannot move against each other.
23Z81.10
Danfoss
23Z83.10
Danfoss
Solder connections
Figure 10: DML/DMLE 1.52s Figure 11: DCL 1.52x2/2s
23Z7018.10
23Z7011.10
L L
Danfoss
Danfos
B B
A A
A2 A2
D2
D2
D1
D1
L
Danfoss
A2
D1
D2
A A2 B L D1 D2 Net weight
Type
[in.] [in.] [in.] [in.] [in.] [in.] [lbs]
DML/DMLE 1.52s 1.77 1.3 2.48 3 1.81 1.69 0.26
DML 1.52x2/2s 1.77 1.3 2.48 3 1.81 1.69 0.26
DCL 1.52XL/2.8mm s 1.77 1.3 – 4.17 1.81 1.69 0.26
A A1 A2 B L D1 D2 Net weight
Type
[in.] [in.] [in.] [in.] [in.] [in.] [in.] [lbs]
DCL/DML 165s 4.33 2.17 2.17 5.28 6.22 3.15 2.99 1.45
DCL/DML 166s 4.33 2.17 2.17 5.51 6.69 3.15 2.99 1.47
DCL/DML 167s 4.33 2.17 2.17 5.35 6.77 3.15 2.99 1.49
Ordering
(1)
Wire mesh in filter drier outlet
(2)
India make is available with code 023ZXXXX91
Type Connection size Multi pack Industrial pack for OEM only
[in.] [mm] Code no. Qty. Code no. Qty.
DML 303 3⁄8 10 023Z0049 8 023Z3049 8
DML 304 1⁄2 12 023Z0050 8 023Z3050 8
DML 305 5⁄8 16 023Z0051 8 023Z3051 8
DML 306 3⁄4 19 023Z0193 8 023Z3193 8
DML 385 5⁄8 16 023Z0189 8 – –
DML 413 3⁄8 10 023Z0108 8 – –
DML 414 1⁄2 12 023Z0109 8 – –
DML 415 5⁄8 16 023Z0110 8 023Z3110 6
DML 416 3⁄4 19 023Z0195 8 023Z0210 6
(1)
Wire mesh in filter drier outlet
(2)
India make is available with code 023ZXXXX91
(1)
India make is available with code 023ZXXXX91
(1)
India make is available with code 023ZXXXX91
(1)
Wire mesh in filter drier outlet
The list contains all certificates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.
Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.
(1)
UL approval currently only form DML / DCL
WARNING:
Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for for A3
refrigerants.
Only connection sizes below 25 mm are approved for A2L.
Filter sizes above 60 cu.in shall not be used with A3 refrigerants.
Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.
Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.