Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    KST Eng

    Uploaded by

    Gaby CoCa
    The document describes a ball valve called the CeraValve type KST that is used for abrasive and corrosive media. It has a ceramic lining and floating ball design. The valve comes in a range of sizes from DN 15 to DN 300 with pressure ratings up to PN 63. It can be used in applications like controlling lime slurry in paper/pulp plants or dosing additives in steel production.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    KST Eng

    Uploaded by

    Gaby CoCa
    24 views2 pages
    The document describes a ball valve called the CeraValve type KST that is used for abrasive and corrosive media. It has a ceramic lining and floating ball design. The valve comes in a range of sizes from DN 15 to DN 300 with pressure ratings up to PN 63. It can be used in applications like controlling lime slurry in paper/pulp plants or dosing additives in steel production.

    Original Description:

    Original Title

    KST eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a ball valve called the CeraValve type KST that is used for abrasive and corrosive media. It has a ceramic lining and floating ball design. The valve comes in a range of sizes from DN 15 to DN 300 with pressure ratings up to PN 63. It can be used in applications like controlling lime slurry in paper/pulp plants or dosing additives in steel production.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    KST Eng

    Uploaded by

    Gaby CoCa
    The document describes a ball valve called the CeraValve type KST that is used for abrasive and corrosive media. It has a ceramic lining and floating ball design. The valve comes in a range of sizes from DN 15 to DN 300 with pressure ratings up to PN 63. It can be used in applications like controlling lime slurry in paper/pulp plants or dosing additives in steel production.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Ball valve x KST

    46
    15

    11

    04

    17
    05

    02

    01

    Item Part description Materials Material options Item Part description Materials Material options
    01 Housing 1.4301 1.4462 - 1.4571 - 1.4539 - P250GH - PVDF -PP - 3.7035 17 Wear protection sleeve Al2O3 Si3N4 - SSiC
    02 Seat ring Al2O3 Si3N4 - SSiC 46 Bonnet flange 1.4301 1.4462 - 1.4571 - 1.4539 - P250GH - 3.7035
    04 Ball socket Al2O3 Si3N4 - SSiC O-rings FKM(Viton) FFKM (Kalrez)
    05 Ball ZrO2 Si3N4 - WoC - 2.4605 - 1.4112 Seals FKM(Viton) PTFE - Viton/FEP - Graphite
    11 Shaft 1.4462 3.7035 - Tantal - ZrO2 - 2.4605 Bearing bushes PTFE
    15 Flange 1.4301 1.4462 - 1.4571 - 1.4539 - P250GH - PVDF -PP - 3.7035 Screws / nuts A2-/A4-70

    10
    Function: Options:
    The CeraValve type KST is a ball valve with ceramic lining for ࡳ all metallic materials for the housing
    open / close function and control tasks to be used in excessively ࡳ Plastic housing (e.g. PP or PVDF)
    abrasive and corrosive media. It is to be preferably used if ࡳ Fire-safe design
    special requirements are placed on the stem sealing, on the ࡳ TA-Luft design
    housing materials (PVDF, titanium) or if there are very high or ࡳ High temperature design (KST-HT type)
    very low operating temperatures and high pressures. The basic ࡳ Wafer-type
    principle is based on the floating ball design. The seats are ࡳ Chemistry design (KSC type)
    rigid (fixed), the ball has a defined clearance and is pressed
    Temperature Range:
    against the downstream seat by the differential pressure, sea-
    ling it. The ¼-turn movement of the ball between 0 and 90 ° Up to 310 °C / 590 °F possible with Kalrez + graphite
    releases an accurately defined opening cross-section. The
    Typical application areas:
    geometric shape of the ball defines the function and control
    characteristics. This ball valve has a “three part body” design. Steel works:
    Consequently, it can be adapted to existing pipelines and the ࡳ Control valve for coal injection (PCI)
    flow and control characteristics can be optimised. These valves ࡳ Expansion valve for coal silo
    are available with manual lever or gear box, as well as with ࡳ Dosing of additive in Electric arc furnace (EAF):
    pneumatic, electric and hydraulic actuators. The actuator is e.g. carbon powder
    mounted by means of a yoke and adapter arrangement. All ࡳ Raw iron desulphurisation with CaC, SiO2, MgO2 …
    customary actuators can be used as part-turn valve actuators. ࡳ Slag formation with quartz sand
    Special connections are possible. Paper & pulp:
    ࡳ Control valve for lime slurry
    ࡳ Control valve for Kaolin, talcum, pulp with wood residue
    …
    Nominal size range:
    Chemistry: (with PVDF housing)
    Flange connections DN 15 (½˝) up to DN 300 (12˝) ࡳ Solid-containing media with a low pH value
    Center housing: DN 15 (½˝) to DN 150 (6˝)
    Abbreviations:
    Pressure range:
    PCI: Pulverised Coal Injection
    PN 10 to PN 63 EAF: Electric Arc Furnance
    ANSI class 150, class 300, and class 600
    Other nominal pressure ranges on request

    Overall length:
    according to EN 558-1 Series 1+27
    according to ASME / ANSI B16.10 / EN 558-2 Series 37+38

    11

    You might also like