SAUDIARAMCO.

M16 BOLTS NOTES:

50
23mm DIA HOLES LIST OF MATERIAL
(TYP. FOR 4 PLACES) (TYP. FOR 16 PLACES)
STEEL TYP. 1.ALL DIMENSIONS ARE IN MILLIMETER UNLESS
POLE ITEM ISSUE REQD.
B 58
NO.
CAT #
UNIT QTY.
DESCRIPTION OTHERWISE SPECIFIED.

STEEL 2.POLES SHALL BE PRE-DRILLED WITH 20MM DIA

W6x20 1 EA BOLT: MACHINE STEEL: ƒ" x 12" LONG. 18,350 LBS. MINIMUM STRENGTH (14-489-360)
CS 4
POLE HOLES AT LOCATIONS SPECIFIED IN THIS DRAWING.
W6x20 TRANSFORMER 2 CS EA 8 WASHER; SPRING FOR ƒ" DIA BOLT (10-891-214)
3.ALL PRE-DRILLED HOLES SHALL BE PROVIDED WITH
53 L3x3x…"
3 CS EA 16 WASHER; ROUND FLAT FOR ƒ" DIA BOLT (10-889-372) CAPS OR PLUGS (DURABLE PLASTIC OR COMPOSITE
61
DC

OF
4 EA 3 CLEVIS; CLEVIS, STEEL, 30,000 LBS UTS MATERIALS)
DETAIL-A 53 STEEL
POLE 5 CS EA 6 CONNECTOR; COMPRESSION, TYPE 4/0 ACSR (14-272-830)
4.GROUNDING NUT SHALL BE WITH BOLT AND WASHER

L3x3x… "
25

CONSENT
1000

L3x3x… "
6 EA 3 CLEVIS EYE (BEFORE DEADEND CLAMP) 30,000 LBS UTS

660
DC

860

900
C9x15

C9x15
SEE 7 DC EA 3 INSULATOR; SUSPENSION 5.POLE SHALL BE PERMANENTLY MARKED WITH MANU-
61
DETIAL-1 FACTURER'S NAME, YEAR MANUFACTURED, LENGTH
8 DC EA 3 CLAMP: DEAD END FOR 4/0 AWG
AND ULTIMATE LOAD RATING.
610 9 DC EA 3 BOLT; EYE
60 60 W6x20 6. CONTRACTOR SHALL DRILL HOLES IN FIELD FOR
760 10 DC EA 3 INSULATOR, POST
25 SEE

TTEN
REQUIRED INSTALLTION ON STEEL POLES AND
MC6x12 DETIAL-2 11 CS SF 2 PLATE: STEEL, ‚" THICK
MC9x15 PROVIDE HIGH PERFORMANCE COLD GALVANIZING
STEEL EA BRACKET; MOUNTING, XARM FOR SURGE ARRESTER (14-352-040)
A A 12 CS 3

WRI
POLE SECTION A-A 13 4503193751-001 EA
SPRAY TO THE FIELD DRILLED LOCATION.
1 TRANSFORMER

PLACES)
SCALE 1:10 7. FOR SIDE GUY INSTALLATION SEE TYPICAL DRAWING
14 16-041-496 EA 1 CIRCUIT BREAKER, 100AF/50AT WITH ENCLOSURE
53 BD-496284 SH. 002.

THE
DC EA 2 POLE; STEEL, OCTAGONAL, 55 FEET LONG
B 15

50
8. EITHER COMPOSITE OR PORCELAIN TYPE INSULATORS
16 DC EA 3 STUD; POST INSULATOR ANGLE MOUNTING ‡" DIA x7" LG
150 460 150 MAY BE USED. REFER TO SAES-P-107 FOR DETAILS.
17 CS EA 4 BOLT, MACHINE STL: ƒ" x 22" LONG 18,350 LBS MINIMUM STRENGTH (14-489-376)

LG.

THOUT
8
745 760 745 18 CS EA 5 CROSSARM; STEEL 4"X6"X10FT LONG WITHOUT BRACE

TYP.FOR
19 CS ST 4 BOLT ASSEMBLY, MACHINE: M20, ASTM A307, 20mm DIA x40LG NUT & WASHER

18{ x36
2250
2500

WI
20 CS PC 1 PLATE: STEEL 150 x 75 x 6MM THICK, ASTMA36

SLOT
PLAN 21 CS EA 3 BRACKET: MOUNTING; X-ARM USED FOR CUT OUT (14-352-040)

NG
(
OPGW SEE DRAWING SCALE 1:10 22 CS EA 3 CUT OUT; FUSE: DISTRIBUTION
200

DRAWI
BA-496289 SH. 002
W6x20 23 1000385547 EA 3 SURGE ARRESTOR; POLE MOUNTED.
OPGW SEE DRAWING SLOT
BA-496289 SH. 002 58 24 CS PC PLATE: STEEL•" THICK
18{x36 LG. 4
25 CS FT 7 MISC. CHANNEL: GALVANIZED STEEL ASTM MC9x15 1.58M LG
EA

S
26 3

150
CS LINK FUSE; RATING AS REQUIRED

THI
75
1200

27 CS MT 2.4 PIPE; FIBER GLASS, 250mm DIA. (01-514-610)

4 6 7 8 9 6
150
DETAIL-2 28 CS EA 3 CLAMP; HOTLINE FOR 4/0 AWG (14-103-524)

FROM
1250 29 CS MT 5 CONDUCTOR; BARE, 50MM/SQ, COPPER
5 (TYP. FOR-3) 23{ HOLE SCALE 1:10
20 19
FOR M20 BOLT 30 CS MT 40 WIRE; BARE COPPER HARD DRAWN STRANDED 50mm/SQ (# 1/0 AWG)

75 31 CS RO 3 TAPE,ELECTRICAL:25,4MM WD,10M LG,1MM THK, RUBBER, RED (14-970-100)

37.5

NED
32 CS EA 2 NIPPLE; CONDUIT 2"x4" LONG (15-444-382)
127 75
1 2 3 2 CLAMP; FOR HOLDING TRANSFORMER MOUNT PLATFORM

OBTAI
33 CS EA
34 CS EA 12 CONNECTOR: ELECT. TERM. LUG 1/0 AWG (14-198-135)
(TYP. FOR-2)
DETAIL-A 35 1000417525 FT CABLE DIRECT BURID, 3-1/C 70mm (15-118-961)
A 100
2
SCALE 1:10 TYP 36 1000419988 MT 45 WIRE; ELEC: 25mm CONDUCTOR; GREEN (15-195-390)
1097

28

BE
30 31 52 37 CS EA 1 HEAD; SERVICE ENTRANCE FOR 2" DIA. CONDUIT
MC9x15 MC9x15 38 CONDUIT; RGS PVC COATED 2" DIA.
CS PC 4

PART,SHALL
(TYPICAL)
39 CS EA 2 UNION: CONDUIT; PVC COATED RGS 2" DIA.
56 10 16 25
40 CS EA 4 BUSHING; CONDUIT INSULATION GRD; 2" DIA. PVC COATED
(TYP. FOR-2)
41 CS EA 2 CONDUIT, COUPLING 2" DIA. RGS PVC COATED
SEE NOTE-7
1296

42 CS EA 4 ELBOW, RIGID CONDUIT, PVC COATED, 2" DIA. x 90°, 30" RADIUS
30 31 52 TYP
5 43 CS EA 15 STRAP: FOR CONDUIT AND GROUND WIRE

44 CS PC 2 CONDUIT; RGS, PVC COATED 1•" DIA.

(TYPICAL)

N
W6x20 45 CS EA 4 BUSHING; INSULATING 1•" DIA.

I
17
34 60 A 46 CS CM 0.4 CONCRETE: READY MIX, 2500 PSI

FULL,OR
34
2 3 47 CS FT 2 ANGLE BAR, 3"x3"x3/8" THK ROLLED (12-460-315)
REFERENCE DRAWINGS
DETAIL-1 48 CS PK 1 MOLD FOR GROUNDING WIRE 10FT. LONG
(TYP. FOR-4) DWG. CONTROL FOR J.O.
26 21 22 SCALE N.T.S 49 CS EA 2 METAL FRAMING CHANNEL, SINGLE, UNISTRUT
50 CS EA 2 CLAMP: RIGID STEEL CONDUIT, 1•" DIA HOT DIP GALV.
1196

(TYP. FOR-3) 61

N
51 CS MT 6 BAR; CONC.; REINF. 12mm DIA. (12-720-560)

I
(TYP.)
MC9x15 52 CS MT 40 RAYCHEM H. V. TUBE

ON
18 53 CS FT 5 EQUAL ANGLE: GALVANIZED STEEL ASTM A36, L3x3x…" 75CM LG.

REPRODUCTI
54 CS FT 6 PIPE; PVC 1•" DIA. (01-515-441)
23
W6x20 55 CS PK 1 DUXSEAL: COMPOUND (14-872-276)
12 23 25 56 1000392957 ST 2 ROD: ARMOR FOR 4/0 AWG (14-616-990)
70 24
57 CS EA 6 CONNECTOR: ELECTRICAL TERMINAL, LUG 1-HOLE 2/0 (14-198-136)
TYP.
5 58 CS ST 20 BOLT ASSEMBLY, MACHINE: M16, ASTM A307, 16mm DIA x38LG NUT & WASHER
30
15 59 MT 10
CS EQUAL ANGLE: GALVANIZED STEEL ASTM A36, L1x1x…" 27CM LG.

SAUDIARAMCO.NO
60 CS EA 0.25 MISC. CHANNEL: GALVANIZED STEEL ASTM MC6x12 1.58M LG
61 CS FT 15 WIDE FLANGE: GALVANIZED STEEL ASTM A36, W6x20 2.25M LG.
SECTION A-A 12mm
62 CS EA 2 ROD; GROUND †" DIA. x 10' LONG COPPER WELD WITH CLAMP (14-246-542)
H1 H2 H3 34 STIFF PLATES
34 SCALE N.T.S 63 CS EA 1 OPGW SPLICE JUNCTION BOX
64 CS EA 4 THERMIT WELD TO GROUND ROD
57
860 65 CS FT 6 PIPE; PVC 1•" DIA.(01-551-441)

X0 X1 X2 X3 66 CS PC 2 CONDUIT; 1" DIA. PVC DB-120

36 660 2
67 1000374602 EA 6 LUG; TERMINATING, 25MM (#4AWG) CABLE
13
50 50 68 1000420040 MT 10 WIRE; 25MM (#4AWG) 1, GREEN, PVC INSU. COPPER
36

OF
13 33 50 D 50 100
M16 BOLTS 69 ELBOW; 1" DIA. 90° RADIUS PVC DB-120
CS EA 1
53 70 CS EA 1 HV TAPE

PROPERTY
58

50
35
37 55

267
61 M12 EARTHING NUT (WELDED)
W6x20 (TYP.)
45 59

SOLE
35 HEX. HEAD BOLT WITH WASHER
M12x30LG. (SUPPLIED WITH STEEL POLE)
50

L1x1x…"
43 15
MC6x12

THE
38 60
(TYPICAL)
44
STEEL POLE L3x3x…" (TYP.)
68 69

ARE
POLE SHAFT
5000

43
66 67

N
HEREI
50 OPGW SPLICE
63 32
CLOSURE OPGW SPLICE SECTION B-B
63
CLOSURE SCALE 1:10
14
38 39

NED
GROUND LEVEL
SCALE: NONE
47 11

CONTAI
1200

36 40
TOP OF
PAVED AREA REVISION VALIDATION

41 42
50

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

FINISH GRADE

ON
FINISH GRADE 765200-0915-001
27

NFORMATI
450

64 DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

THERMIT WELD RM JAB RM JAB

09/01/15 09/01/15 09/01/15 09/01/15
1500
REV.NO. DATE REVISION DESCRIPTION

I
62 00 09/01/15 NEW STANDARD FOR STEEL POLE

62

THE
450

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR
54 765200 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
CLEAN SAND
DRAWING TYPE
27 46 47
TERMINAL POLE WITH 3 PHASE TRANSFORMER STD

NG
13.8KV -34.5KV OVERHEAD POWERLINE

DRAWI
48 51 62

STANDARD DRAWING
TO GROUNDING 64 65
GRID POLE GROUNDING STD. DWG. SAUDI ARABIA
SIDE ELEVATION GROUND ROD INSPECTION PIT
FRONT ELEVATION

S
GROUND ROD FOR PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
LIGHTNING ARRESTER AND NOT TO SCALE

TRANSFORMER 990 P AA-036142 010 00

Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-01