Ladder Program Converter

Ladder Program Converter
Operation Manual
Rev: V1.31
Ladder Program Converter Operation Manual
CONTENTS
1. About Ladder Program Converter...........................................................8

2. Operation Environment............................................................................8
2.1. OS Object Operation System ..........................................................8
2.2. Object PLC Series ............................................................................8
3. Installation and uninstall .........................................................................9
3.1. Installation ........................................................................................9
3.2. Uninstall............................................................................................9
4. Notice about the conversion .................................................................10
4.1. Notice of the Copy-Paste Conversion Method ............................10
4.2. Conversion limition........................................................................10
5. Copy-Paste Conversion Method in CX-P..............................................12
5.1. Copy Program from GX-Developer of Mitsubishi........................12
5.2. Copy Program from STEP 7 MicroWIN of Siemens.....................20
5.3. Conversion List File.......................................................................27
6. ERROR List and Solutions ....................................................................29
7. Appendix .................................................................................................30
7.1. Instruction Convert list..................................................................30
2 / 56
Introduction
This manual contains information required to use the Ladder Program Converter.
Please refer to the user’s manual of PLC unit while you use Ladder Program Converter.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical systems
(an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
Note
This manual contains information required to use the Ladder Program Converter.
Read this manual completely and be sure you understand the contents before attempting to use the Ladder
Program Converter.
Pease keep the manual and always keep it at hand after reading.
Read and Understand this Manual

1． WARRANTY
This software is used to convert the instructions of FX3/2/1N/1S series made by Mitsubishi Electric
Corporation and S7-200 series made by Siemens to OMRON instructions according to the conversion rules
as much as possible.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING
NONINFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE
PRODUCTS.
After conversion operation, the Programmable Logic Controller is responsible for the operation of
CX-Programmer. Please refer to the programmable manual of our company.
Related Manuals
CP1H CPU Unit Operation Manual (Cat. No.W450)
CP1L CPU Unit Operation Manual (Cat. No.W462)
CP1E CPU Unit Hardware User’s Manual (Cat. No. W479)
CP1E CPU Unit Software User’s Manual (Cat. No. W480)
2. LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
3 / 56
3. SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the
combination of products in the customer's application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying
ratings and limitations of use that apply to the products. This information by itself is not sufficient for a
complete determination of the suitability of the products in combination with the end product, machine,
system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not
intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses
listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or
uses not described in this manual.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, safety equipment, and installations subject to separate
industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other
reasons.
4 / 56
Requirement of configuration
Environment of the converter can be installed
Microsoft Windows 2000 Microsoft Windows XP Microsoft
Service Pack2 or higher Windows Vista/Windows 7
（32bit version）
CPU Pentium series CPU Pentium series CPU DOS/V(IBM AT compatible
150MHz or better CPU 300MHz or better CPU machine) equipped with
Pentium III 1GHz or better Pentium III 1GHz or better processor that Microsoft
central processors central processors recommended
configuration （ 1GHz or
better CPU）
Memory（RAM） 256MB or more 384MB or more Must be 512MB or more
1GB or more is better
Hard drive space 50MB of free 50MB of free 50MB of free
Trademarks
Windows is a registered trademark of Microsoft Corporation.
Other system names and product names in this document are the trademarks or registered trademarks
of their respective companies.
5 / 56
Safety Precautions
Definition of Precautionary Information
The following notation is used in this manual to provide precautions required to ensure safe usage of Ladder
Program Converter, CX-Programmer and Programmable Logic Controller (PLC). The safety precautions
that are provided are extremely important to safety. Always read and heed the information provided in all
safety precautions.
Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.
Additionally, there may be severe property damage.
Indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate
injury, or property damage.
Precautions for Safe Use

Indicates precautions on what to do and what not to do to ensure using the product safely.
Precautions for Correct Use

Indicates precautions on what to do and what not to do to ensure proper operation and performance.
Additional Information
Additional information to increase understanding or make operation easier.
Symbols
The triangle symbol indicates precautions (including
warnings). The specific operation is shown in the
triangle and explained in text. This example indicates
a precaution for electric shock.
The circle and slash symbol indicates operations that

you must not do. The specific operation is shown in
the circle and explained in text.
The filled circle symbol indicates operations that you

must do. The specific operation is shown in the circle
and explained in text. This example shows a general
precaution for something that you must do.
6 / 56
a general precaution.

a precaution for hot surfaces.
This tool is just used to convert the instructions of Mitsubishi and

Siemens to instructions of OMRON according to the conversion rules as
much as possible. Because the ladder program can not be converted
completely, it is necessary to modify the instructions and memory area
which have not been converted. The operation of the made ladder
program must be confirmed enough before carrying out a formal
operational.
System operation may be abnormal without confirmation.
The I/O memory convert specification is made before instruction

conversion. If you want to add program after conversion, it is necessary
to confirm there is no repetition of I/O memory.
System operation may be abnormal without confirmation.
7 / 56
1. About Ladder Program Converter

This tool is used to convert the instructions of Mitsubishi and Siemens to instructions of OMRON according
to the conversion rules.
2. Operation Environment
2.1. Operation System
Ladder Program Converter can only run in Microsoft Windows 2000(Service Pack2 or higher), Microsoft
Windows XP, Microsoft Windows Vista (32bit version) and Microsoft Windows 7 (32bit version).
2.2. Object PLC Series

PLC type of Conversion Source includes FX3/2/1N/1S of Mitsubishi as well as S7-200 series of Siemens.
OMRON PLC type of Conversion Destination is CP1H/CP1L/CP1E.
8 / 56
3. Installation and uninstall

3.1. Installation
The install steps are as follows:
(1) Uninstall the previous version of Ladder Program Converter before installing the new version. Please
refer to the section 3.2 for details of the method of uninstall.
(2) Copy the install files of Ladder Program Converter to object folder specified by users.
(3) Run “setup.exe” in the install files.
(4) Install Ladder Program Converter according to the installation prompts.
Note:
When installing CX-Programmer 9.0, the converter tool “Ladder Program Converter v1.1” will be
installed at the same time. For the new version with “Ladder Program Converter v1.3”, please refer
to the above install step (2) – (4).
3.2. Uninstall
Please perform the Uninstall of Ladder Program Converter through the Add/Remove Programs.
Select Start -Setting - Control Panel - Add/Remove Programs.
Select Ladder Program Converter from the dialogue box.
Click the Remove Button.
And then finish uninstall under the instruction of install-shield wizard.
Note:
(1) Please don’t delete the folder where Ladder Program Converter is installed directly, otherwise
the operation of reinstall and uninstall can’t carry out correctly.
(2) If the converter tool is installed (updated) in the CX-Programmer 9.0, it can’t be uninstalled
without CX-Programmer 9.0. When uninstalling CX-Programmer 9.0, the converter tool will be
uninstalled at the same time.
9 / 56
4. Notice about the conversion

4.1. Notice of the Copy-Paste Conversion Method
(1) Setting FX3/2/1N/1S series of Mitsubishi as the copy source has been tested. The program of
other series PLC could not be identified.
(2) In Omron CX-P, paste can be performed in the Diagram view and Mnemonic view of Section.
(3) The UNDEFINST will be output when Instruction of Mitsubishi can not be identified. The UNDEFOPER
will be output to substitute for the operand of Mitsubishi which can not be identified.
(4) When the Source instruction can not been converted to the OMRON instruction, a “Mi_” will be added
before the Mitsubishi instruction and a “Si_” will be added before the Siemens instruction as the
conversion result in the CXT file.
(5) That copy from Siemens program should start with Network 1 and the minimum copy unit is one Network
otherwise some programs will lost.
(6) Because the Channel length of Siemens is different from that of MONRON, Siemens channel length is 8
bits, while OMRON channel length is16 bits, the Error will occur during the conversion. Please pay
more attention to it.
4.2. Conversion Limition

(1) About Siemens Instructions:
Problem Detail
OB Series can not be

Converting will break the LD’s structure, so it can not be converted.
converted
Because of the different Resolution, the Tim Number will change
TON after converted.
TONR function is changed When set value is arrived, OMRON TIM will stop and Siemens TIM
after being converted will continue
DIV It occur address across problem after converted.
SBR/CALL It’s a subroutine instruction.
In Siemens, SBR/CALL is used to jump to the subroutine section
directly, the section number is regarded as the sign.
In OMRON, it jumps from SBS to SBN, SBN is regarded as the sign.
Float can not be converted The OMRON PLC doesn’t support float constant, so it can not be
directly converted.
Flag SM1.1 can not be The Flag SM1.1of Siemens needs the special Flags (P_CY, P_OF
converted and P_UF) of OMRON to correspond.
10 / 56
(2) About Mitsubishi Instructions:
Problem Detail
Mitsubishi area X,Y Each point of Mitsubishi area X,Y corresponds a physical I/O.
ÆOmron area CIO Not every point of Omron area CIO corresponds a physical I/O.
Mitsubishi area The area C200~C255 of Mitsubishi is 32 bits length;
C200~C255Æ Omron area The area C200~C255 of Omron is 16 bits length.
C200~C255
When data is beyond max. range in Mitsubishi, the result is
recalculated from 0. The carry flag is active;
When data is less than min. range in Mitsubishi, the result is
recalculated from 0. The borrow flag is active.
The flag couldn’t reset until changing next time.
Ex.when the operand is 16 bit length,, 32767+1=0;-32768-1=0
The carry and borrow flag is the same flag (CF) in Omron.
The marker bit and the It’s the difference with that in Mitsubishi.
structure of arithmetic is CF is active when data changes from plus to negative or from
difference. negative to plus.
When data is beyond max. range in Omron, the data is cycle
operation.The overflow flag is active.
When data is less than min. range in Omron, the data is cycle
operation. The underflow flag is active.
The flag will reset next cycle.
Ex.when the operand is 16 bit length,
32767+1=-32768;-32768-1=32767
The pulse instruction of Mitsubishi P instruction will execute one time after contact M8000.
Mitsubishi is difference with Omron @ instruction won’t execute after cotact P_on.
that of Omron
Sequence Control Mitsubishi’s sequence control logo can’t be converted.So Function
Instructions and can not be achieved.
SUBROUTINE instructions
will no function after being
converted
In Mitsubishi PLC, program can be divided into a shorter period of
WDT function is changed
time, through WDT (watchdog timer) monitor the cycle time;
after being converted
EI/DI function is changed The Mitsubishi PLC default disable interrupts,

after being converted The Omron PLC default ensable interrupts.
To ASC instructions, if the string of first operand contains symbol ‘,’,
The function of ASCII code
then the characters after this symbol will be abandoned.If this string
instructions is difference
contains two or more symbols ‘,’, then the second operand will be
after being converted
abandoned too.
11 / 56
5. Copy-Paste Conversion Method in CX-P
The Ladder Program Converter supports copying the program from the conversion source software
(Mitsubishi GX-Developer, Siemens STEP 7 MicroWIN) directly and pasting to the CX-Programmer 9.0，
CX-Programmer for CP1E 1.00 or higher Version.
5.1. Copy Program from GX-Developer of Mitsubishi
Only Fx3/2/1N/1S series PLC of Mitsubishi supports the direct-copy method. The integrity of program
reading can not be guaranteed when the method are used to other series PLC.
(1) Open the source program in GX-Developer.
Fig.5-1 Mitsubishi GX-Developer
12 / 56
(2) Click , enter the mnemonic list window.
Fig.5-2 Mitsubishi instruction list View
(3) Select the Program needed to be converted and copy it.
13 / 56
(4) Start up CX-Programmer and create a new project. (Once you've created a new project, if converted Omron's
PLC model is CP1H/CP1L, please follow the steps to perform actions. If the converted Omron's PLC model is CP1E,
please step 7.)
Fig.5-3 OMRON CX-Programmer View
14 / 56
(5) Right-click NewPLC, click properties
Fig. 5-4 Change properties box
15 / 56
(6) Choose Execute Timer/Counter as Binary
Fig. 5-5 Choose Execute Timer/Counter as Binary box
(7) Paste the source program in the Diagram view or Mnemonics view. And the following dialogue box will
be displayed.
Fig. 5-6 Ladder Conversion Dialogue box
16 / 56
(8) Click the Browse Button; designate the name and path of conversion list file.(Fig.5-7)
Fig. 5-7 Conversion list file saving dialogue box
(9) Select the conversion source PLC type. Click the OK Button and the Converting progress bar will be
displayed.
Fig. 5-8 Converting progress bar
17 / 56
(10)The converted program will be displayed in the CX-Programmer.
Fig.5-9 the result of conservation
18 / 56
(11)Insert the temporary variable created during the conversion into the global variable table.
Fig. 5-10 insert the temporary variable
19 / 56
5.2. Copy Program from STEP 7 MicroWIN of Siemens

S7-200 series PLC of Siemens can be selected as the copy source.
(1) Open the program needed to be converted by STEP 7 MicroWIN of Siemens.
Fig.5-11 STEP 7 MicroWIN of Siemens
20 / 56
(2) Convert Siemens SIMATIC to International Symbol
When STEP 7 MicroWIN is started, click Tools menu or right button, select Options, the “Options” screen
is displayed.
Fig.5-12 “Options” Screen of Siemens
Select General in the left tree menu and International in the item of Mnemonic Set.
Fig.5-13 “General” Screen of Siemens
21 / 56
(3) Select view – STL. View the program in STL mode (Mnemonic list).
Fig. 5-14 Siemens Instruction （Mnemonic） list View
(4) Select the program needed to be converted.
Note: It has to start from Network1, and the minimum copy unit is one Network.
22 / 56
(5) Start up CX-Programmer and create a new project.
Fig. 5-15 OMRON CX-Programmer
(6) Paste the source program in the Diagram view or Mnemonics view. And the in following dialogue box will
be displayed.
Fig. 5-16 Ladder Conversion Dialogue box
23 / 56
(7) Click the Browse Button; Designate the name and path of conversion list file.
Fig.5-17 conversion list file selection Dialogue box
(8) Select the conversion destination PLC type. Click the OK Button and the Converting progress bar will be
displayed.
Fig. 5-18 Converting Progress Bar
24 / 56
(9) The converted program will be displayed in the CX-Programmer. Corresponding converter information
will display in the output window.If the conversion list file designated in step 6, the conversion results will
be output to this file.
Fig. 5-19 the result of conversion
25 / 56
(10)Insert the temporary variables created during the conversion into the global variable table.
Fig. 5-20 Insert temporary variable
26 / 56
5.3. Conversion List File

Conversion List File is the instruction list before and after the conversion. It is a CSV file.
(1) Conversion List File specification

6 columns:
1) Conversion Source Step (Step No. for Mitsubishi instruction, NetWork No. for Siemens
instruction)
2) Conversion Source Instruction
3) Conversion Source Operand
4) Conversion Destination Step
5) Conversion Destination Instruction
6) Conversion Destination Operand
When the conversion type is 1:N*Note1, only the first OMRON instruction of conversion destination has
the Step No.
When the instruction conversion error occurs, the instruction of conversion destination has not Step No.
When the operand conversion error occurs, the Step No. will be generated normally.
When converting the Mitsubishi program by the COPY-PASTE conversion method, the content of CSV file
first column (Conversion Source Step) is not the Step No. in GX-D but the Instruction Quantity No.
*Note 1:
One source instruction is converted to more than one destination instruction or one source
instruction being converted to one destination instruction with different number and order of
operands
(2) Open the CSV File in Excel

When Opening the CSV file in Excel, please pay attention to the following items:
1) When the operand of OMRON instruction is bool type and the decimal fraction part is 0, the
decimal fraction part will be lost. For example 0.00 will be displayed as 0.
2) The +L、-L、++L and --L instruction of OMRON will be displayed as “#NAME？”. Please modify it
manually.
3) The +、-、++ and -- instruction of OMRON in excel will be as maths symbols .Please modify it
manually.
4) Please edit the CSV file in Notepad, not in Excel.
27 / 56
(3) Conversion Example

Example of Mitsubishi:
SrcStep SrcInst SrcMem DstStep DstInst DstMem
0 LD X000 0 LD 0.00
1 BIN T0 1 BIN（023） T0
T1 (No Step number) T1
6 LD X001 2 LD 0.01
7 REF X000 (No Step number) MI_REF X000
K0 (No Step number) K0
12 END 3 END
Example of Siemens:
SrcStep SrcInst SrcMem DstStep DstInst DstMem
NetWork 1 LD I0.0 0 LD 0.00
NetWork 1 MOVW VW0 1 MOV（021） D0
VW2 (No Step number) D2
NetWork 2 LD I0.1 2 LD 0.01
NetWork 2 STR VB0 (No Step number) SI_STR VB0
VB1 (No Step number) VB1
VB2 (No Step number) VB2
END
ORGANIZATION ENDP 3 END
BLOCK
28 / 56
6. ERROR List and Solutions

Error List Solutions
Choose the “Generated a

conversion list” and click the
“OK” button when the path and
name of conversion list file is
not designated. The warning
will be displayed.
If the converter destination

PLC type is not supported, the
warning dialog box will display.
Please install CX-Programmer

(v9.0 or up version) or
CX-Program for CP1E, and
then install this tool again.
If CX-Programmer doesn’t
suppor this tool, please use
this tool by CX-Program for
CP1E.
29 / 56
7. Appendix
7.1. Instruction Convert list
Conversion status：
○: Complete conversion △: Incomplete conversion (Restrict Condition)
×: No conversion ●: Corresponding Mitsubish PLC
(1) Mitsubishi PLC Instruction Convert List
(Note: Specific conversion information, refer to Appendix: Mitsubishi Convert Specification)
Fx Fx Fx Fx Convert
No. Instruction Function Class Remark
3 2 1N 1S Status
1 LD Load Contact Instruction ● ● ● ● ○
2 LDI Load Inverse Contact Instruction ● ● ● ● ○
3 LDP Load Pulse Contact Instruction ● ● ● ● ○
4 LDF Load Falling Pulse Contact Instruction ● ● ● ● ○
5 AND And Contact Instruction ● ● ● ● ○
6 ANI And Inverse Contact Instruction ● ● ● ● ○
7 ANDP And Pulse Contact Instruction ● ● ● ● ○
8 ANDF And Falling Pulse Contact Instruction ● ● ● ● ○
9 OR Or Contact Instruction ● ● ● ● ○
10 ORI Or Inverse Contact Instruction ● ● ● ● ○
11 ORP Or Pulse Contact Instruction ● ● ● ● ○
12 ORF Or Falling Pulse Contact Instruction ● ● ● ● ○
13 ANB And Block Contact Instruction ● ● ● ● ○
14 ORB Or Block Contact Instruction ● ● ● ● ○
15 MPS Memory Point Contact Instruction ● ● ● ● ○
Store
16 MRD Memory Read Contact Instruction ● ● ● ● ○
17 MPP Memory POP Contact Instruction ● ● ● ● ○
18 INV Inverse Contact Instruction ● ● ● ● ○
19 MEF MEF Contact Instruction ● ○
20 MEP MEP Contact Instruction ● ○
21 OUT Out Out Instruction ● ● ● ● ○
22 OUT [C] Out Out Instruction ● ● ● ● ○
23 OUT [T] Out Out Instruction ● ● ● ● ○
24 SET Set Out Instruction ● ● ● ● ○
25 RST Reset Out Instruction ● ● ● ● ○
26 PLS Pulse Out Instruction ● ● ● ● ○
27 PLF Falling pulse Out Instruction ● ● ● ● ○
28 MC Master Control Master Control ● ● ● ● ○
Instruction
29 MCR Master control reset Master Control ● ● ● ● ○
Instruction
30 NOP No Operation Other Instruction ● ● ● ● ○
31 END End End Instruction ● ● ● ● ○
32 STL Step Ladder Step Ladder ● ● ● ● ×
Instruction
33 RET Return Step Ladder ● ● ● ● ×
Instruction
34 CJ Conditional jump Program Flow ● ● ● ● ○
35 CJP Conditional jump Program Flow ● ● ● ● ○
36 CALL Call Subroutine Program Flow ● ● ● ● ○
37 CALLP Call Subroutine Program Flow ● ● ● ● ○
38 SRET Subroutine Return Program Flow ● ● ● ● ○
39 IRET Interrupt Return Program Flow ● ● ● ● ×
40 EI Enable Iinterrupt Program Flow ● ● ● ● ○
41 DI Disable Interrupt Program Flow ● ● ● ● ○
42 FEND Main Routine Program Flow ● ● ● ● ○
Program End
43 WDT Watchdog Timer Program Flow ● ● ● ● ○
Refresh
44 WDTP Watchdog Timer Program Flow ● ● ● ● ○
Refresh
30 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
45 FOR Start of a For/Next Program Flow ● ● ● ● △ Operand includes KZ、KV、
loop KXZ、KYZ、KSZ、KMZ、
TZ、TV、CZ、CV. NO
conversion.
46 NEXT End a For/Next Program Flow ● ● ● ● ○
loop
47 CMP Compare Move and Compare ● ● ● ● △ Operand includes KZ、KV、
KXZ、KYZ、KSZ、KMZ、
conversion.
48 CMPP Compare Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
49 DCMP Compare Move and Compare ● ● ● ● △ Operand includes KZ、
TZ、CZ NO conversion.
50 DCMPP Compare Move and Compare ● ● ● ● △ Operand includes KZ、
51 ZCP Zone Compare Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
52 ZCPP Zone Compare Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
53 DZCP Zone Compare Move and Compare ● ● ● ● △ Operand includes KZ、
54 DZCPP Zone Compare Move and Compare ● ● ● ● △ Operand includes KZ、
55 MOV Move Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
56 MOVP Move Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
57 DMOV Move Move and Compare ● ● ● ● △ Operand includes KZ、
58 DMOVP Move Move and Compare ● ● ● ● △ Operand includes KZ、
59 SMOV Shift Move Move and Compare ● ● ×
60 SMOVP Shift Move Move and Compare ● ● ×
61 CML Complement Move and Compare ● ● ○
62 CMLP Complement Move and Compare ● ● ○
63 DCML Complement Move and Compare ● ● △ To CP1E.No Conversion.
64 DCMLP Complement Move and Compare ● ● △ To CP1E.No Conversion.
65 BMOV Block Move Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
66 BMOVP Block Move Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
67 FMOV Fill Move Move and Compare ● ● ×
68 FMOVP Fill Move Move and Compare ● ● ×
69 DFMOV Fill Move Move and Compare ● ● ×
70 DFMOVP Fill Move Move and Compare ● ● ×
71 XCH Exchange Move and Compare ● ● ○
72 XCHP Exchange Move and Compare ● ● ○
31 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
73 DXCH Exchange Move and Compare ● ● △ To CP1E.No Conversion.
74 DXCHP Exchange Move and Compare ● ● △ To CP1E.No Conversion.
75 BCD Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、KV、
Binary Coded KXZ、KYZ、KSZ、KMZ、
Decimal TZ、TV、CZ、CV. NO
conversion.
76 BCDP Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、KV、
Decimal TZ、TV、CZ、CV. NO
conversion.
77 DBCD Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、
Decimal TZ、CZ. NO conversion.
78 DBCDP Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、
Decimal TZ、CZ. NO conversion.
79 BIN Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、KV、
Binary KXZ、KYZ、KSZ、KMZ、
conversion.
80 BINP Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、KV、
conversion.
81 DBIN Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、
TZ、CZ. NO conversion.
82 DBINP Conversion to Move and Compare ● ● ● ● △ Operand includes KZ、
83 ADD Addition Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
Logical operations KXZ、KYZ、KSZ、KMZ、
conversion.
84 ADDP Addition Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
85 DADD Addition Arithmetic and ● ● ● ● △ Operand includes KZ、
86 DADDP Addition Arithmetic and ● ● ● ● △ Operand includes KZ、
87 SUB Subtraction Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
88 SUBP Subtraction Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
89 DSUB Subtraction Arithmetic and ● ● ● ● △ Operand includes KZ、
90 DSUBP Subtraction Arithmetic and ● ● ● ● △ Operand includes KZ、
91 MUL Multiplication Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
92 MULP Multiplication Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
32 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
93 DMUL Multiplication Arithmetic and ● ● ● ● △ Operand includes KZ、
94 DMULP Multiplication Arithmetic and ● ● ● ● △ Operand includes KZ、
95 DIV Division Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
96 DIVP Division Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
97 DDIV Division Arithmetic and ● ● ● ● △ Operand includes KZ、
98 DDIVP Division Arithmetic and ● ● ● ● △ Operand includes KZ、
99 INC Increment Arithmetic and ● ● ● ● △ Operand includes KZ、
100 INCP Increment Arithmetic and ● ● ● ● △ Operand includes KZ、
101 DINC Increment Arithmetic and ● ● ● ● △ Operand includes KYZ、
Logical operations KSZ、KMZ、TZ、CZ. NO
conversion.
102 DINCP Increment Arithmetic and ● ● ● ● △ Operand includes KYZ、
conversion.
103 DEC Decrement Arithmetic and ● ● ● ● △ Operand includes KZ、
104 DECP Decrement Arithmetic and ● ● ● ● △ Operand includes KZ、
105 DDEC Decrement Arithmetic and ● ● ● ● △ Operand includes KYZ、
conversion.
106 DDECP Decrement Arithmetic and ● ● ● ● △ Operand includes KYZ、
conversion.
107 WAND Logical Word AND Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
108 WANDP Logical Word AND Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
109 DAND Logical Word AND Arithmetic and ● ● ● ● △ Operand includes KZ、
110 DANDP Logical Word AND Arithmetic and ● ● ● ● △ Operand includes KZ、
111 WOR Logical Word OR Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
112 WORP Logical Word OR Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
33 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
113 DOR Logical Word OR Arithmetic and ● ● ● ● △ Operand includes KZ、
114 DORP Logical Word OR Arithmetic and ● ● ● ● △ Operand includes KZ、
115 WXOR Logical Exclusive Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
OR Logical operations KXZ、KYZ、KSZ、KMZ、
conversion.
116 WXORP Logical Exclusive Arithmetic and ● ● ● ● △ Operand includes KZ、KV、
conversion.
117 DXOR Logical Exclusive Arithmetic and ● ● ● ● △ Operand includes KZ、
118 DXORP Logical Exclusive Arithmetic and ● ● ● ● △ Operand includes KZ、
119 NEG Negation Arithmetic and ● ● △ Operand includes address
Logical operations out of converter range and
KY、KM、KS、TV、TZ、
CV、CZ、DV、DZ、KYZ、
KSZ、KMZ. NO
conversion.
120 NEGP Negation Arithmetic and ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
121 DNEG Negation Arithmetic and ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
To CP1E. NO conversion.
122 DNEGP Negation Arithmetic and ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
To CP1E. NO conversion.
123 ROR Rotation Right Rotation and Shift ● ● ×
Operation
124 RORP Rotation Right Rotation and Shift ● ● ×
Operation
125 DROR Rotation Right Rotation and Shift ● ● ×
Operation
126 DRORP Rotation Right Rotation and Shift ● ● ×
Operation
127 ROL Rotation Left Rotation and Shift ● ● ×
Operation
128 ROLP Rotation Left Rotation and Shift ● ● ×
Operation
129 DROL Rotation Left Rotation and Shift ● ● ×
Operation
130 DROLP Rotation Left Rotation and Shift ● ● ×
Operation
131 RCR Rotation Right with Rotation and Shift ● ● ×
Carry Operation
132 RCRP Rotation Right with Rotation and Shift ● ● ×
Carry Operation
133 DRCR Rotation Right with Rotation and Shift ● ● ×
Carry Operation
34 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
134 DRCRP Rotation Right with Rotation and Shift ● ● ×
Carry Operation
135 RCL Rotation Left with Rotation and Shift ● ● ×
Carry Operation
136 RCLP Rotation Left with Rotation and Shift ● ● ×
Carry Operation
137 DRCL Rotation Left with Rotation and Shift ● ● ×
Carry Operation
138 DRCLP Rotation Left with Rotation and Shift ● ● ×
Carry Operation
139 SFTL Bit Shift Left Rotation and Shift ● ● ● ● △
Operation
140 SFTLP Bit Shift Left Rotation and Shift ● ● ● ● △
Operation
141 SFTR Bit Shift Right Rotation and Shift ● ● ● ● △
Operation
142 SFTRP Bit Shift Right Rotation and Shift ● ● ● ● △
Operation
143 WSFR Word Shift Right Rotation and Shift ● ● ×
Operation
144 WSFRP Word Shift Right Rotation and Shift ● ● ×
Operation
145 WSFL Word Shift Left Rotation and Shift ● ● ×
Operation
146 WSFLP Word Shift Left Rotation and Shift ● ● ×
Operation
147 SFWR Shift write Rotation and Shift ● ● ● ● △ Operand 1 includes KZ、
[FIFO/FILO control] KV、KXZ、KYZ、KSZ、
KMZ、TZ、TV、CZ、CV. NO
conversion.
Operand 2 isn’t T、C、D.
NO conversion.
148 SFWRP Shift write Rotation and Shift ● ● ● ● △ Operand 1 includes KZ、
[FIFO/FILO control] KV、KXZ、KYZ、KSZ、
KMZ、TZ、TV、CZ、CV. NO
conversion.
Operand 2 isn’t T、C、D.
NO conversion.
149 SFRD Shift Read [FIFO Rotation and Shift ● ● ● ● △ Operand 1 isn’t T、C、D.
Control] NO conversion.
Operand 2 isn’t T、C、D、
V、Z、DV、DZ. NO
conversion.
150 SFRDP Shift Read [FIFO Rotation and Shift ● ● ● ● △ Operand 1 isn’t T、C、D.
Control] NO conversion.
V、Z、DV、DZ. NO
conversion.
151 ZRST Zone Reset Data Operation ● ● ● ● △ Operand includes TZ，TV，
CZ，CV. NO conversion.
152 ZRSTP Zone Reset Data Operation ● ● ● ● △ Operand includes TZ，TV，
CZ，CV. NO conversion.
153 DECO Decode Data Operation ● ● ● ● △ Operand includes KZ、KV、
KX、KY、KS、KM、KXZ、
KYZ、KSZ、KMZ、TZ、
TV、CZ、CV. NO
conversion.
154 DECOP Decode Data Operation ● ● ● ● △ Operand includes KZ、KV、
TV、CZ、CV. NO
conversion.
155 ENCO Encode Data Operation ● ● ● ● △ Operand 1 isn’t T、C、D、
V、Z、DZ、DV. NO
conversion.
V、Z、DV、DZ. NO
conversion.
35 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
156 ENCOP Encode Data Operation ● ● ● ● △ Operand 1 isn’t T、C、D、
V、Z、DZ、DV. NO
conversion.
V、Z、DV、DZ. NO
conversion.
157 SUM Sum of Active Bits Data Operation ● ● ×
158 SUMP Sum of Active Bits Data Operation ● ● ×
159 DSUM Sum of Active Bits Data Operation ● ● ×
160 DSUMP Sum of Active Bits Data Operation ● ● ×
161 BON Check Specified Bit Data Operation ● ● ×
Stauts
162 BONP Check Specified Bit Data Operation ● ● ×
Stauts
163 DBON Check Specified Bit Data Operation ● ● ×
Stauts
164 DBONP Check Specified Bit Data Operation ● ● ×
Stauts
165 MEAN Mean Data Operation ● ● ×
166 MEANP Mean Data Operation ● ● ×
167 DMEAN Mean Data Operation ● ● ×
168 DMEANP Mean Data Operation ● ● ×
169 ANS (Timed)Annunciator Data Operation ● ● ×
Set
170 ANR Annunciator Reset Data Operation ● ● ×
171 ANRP Annunciator Reset Data Operation ● ● ×
172 SQR Square Root Data Operation ● ● ×
173 SQRP Square Root Data Operation ● ● ×
174 DSQR Square Root Data Operation ● ● △ To CP1E.No Conversion.
175 DSQRP Square Root Data Operation ● ● △ To CP1E.No Conversion.
176 FLT Conversion to Data Operation ● ● ○
Floating Point
177 FLTP Conversion to Data Operation ● ● ○
Floating Point
178 DFLT Conversion to Data Operation ● ● ○
Floating Point
179 DFLTP Conversion to Data Operation ● ● ○
Floating Point
180 REF Refresh High Speed ● ● ● ● ×
Processing
181 REFP Refresh High Speed ● ● ● ● ×
Processing
182 REFF Refresh and filter High Speed ● ● ● ● ×
adjust Processing
183 REFFP Refresh and filter High Speed ● ● ● ● ×
adjust Processing
184 MTR Input matrix High Speed ● ● ● ● ×
Processing
185 DHSCR High speed cunter High Speed ● ● ● ● ×
reset Processing
186 DHSCS High speed cunter High Speed ● ● ● ● ×
set Processing
187 DHSZ High speed zone High Speed ● ● ×
compare Processing
188 SPD Speed detection High Speed ● ● ● ● ×
Processing
189 DSPD Speed detection High Speed ● ×
Processing
190 PLSY Pulse Y output High Speed ● ● ● ● ×
Processing
191 DPLSY Pulse Y output High Speed ● ● ● ● ×
Processing
192 PWM Pulse width High Speed ● ● ● ● ×
modulation Processing
193 PLSR Ramp Pulse output High Speed ● ● ● ● ×
Processing
194 DPLSR Ramp Pulse output High Speed ● ● ● ● ×
Processing
36 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
195 IST Initial State Handy Instructions ● ● ● ● ×
196 SER Search Handy Instructions ● ● ×
197 SERP Search Handy Instructions ● ● ×
198 DSER Search Handy Instructions ● ● ×
199 DSERP Search Handy Instructions ● ● ×
200 ABSD Absolute Drum Handy Instructions ● ● ● ● ×
201 DABSD Absolute Drum Handy Instructions ● ● ● ● ×
202 INCD Incremental Drum Handy Instructions ● ● ● ● ×
203 TTMR Teaching Timer Handy Instructions ● ● ×
204 STMR Special Timer - Handy Instructions ● ● ×
Definable
205 ALT Altermate State Handy Instructions ● ● ● ● ×
206 ALTP Altermate State Handy Instructions ● ● ● ● ×
207 RAMP Ramp-Variable Handy Instructions ● ● ● ● ×
Value
208 ROTC Rotart Table Handy Instructions ● ● ×
Control
209 SORT Sort Data Handy Instructions ● ● ×
210 TKY Ten Key Input External FX I/O ● ● ×
Devices
211 DTKY Ten Key Input External FX I/O ● ● ×
Devices
212 HKY Hexadecimal Input External FX I/O ● ● ×
Devices
213 DHKY Hexadecimal Input External FX I/O ● ● ×
Devices
214 DSW Digital Switch External FX I/O ● ● ● ● ×
Devices
215 SEGD Seven Segment External FX I/O ● ● ×
Decoder Devices
216 SEGDP Seven Segment External FX I/O ● ● ×
Decoder Devices
217 SEGL Seven Segment External FX I/O ● ● ● ● ×
With Latch Devices
218 ARWS Arrow Switch External FX I/O ● ● ×
Devices
219 ASC ASCII Code External FX I/O ● ● ×
Devices
220 PR Print' To A Display External FX I/O ● ● ×
Devices
221 FROM Read From A External FX I/O ● ● ● ×
Special Function Devices
Block
222 FROMP Read From A External FX I/O ● ● ● ×
Block
223 DFROM Read From A External FX I/O ● ● ● ×
Block
224 DFROMP Read From A External FX I/O ● ● ● ×
Block
225 TO Write To A Special External FX I/O ● ● ● ×
Function Block Devices
226 TOP Write To A Special External FX I/O ● ● ● ×
227 DTO Write To A Special External FX I/O ● ● ● ×
228 DTOP Write To A Special External FX I/O ● ● ● ×
229 RS RS External FX Serial ● ● ● ● ×
Communications Devices
230 PRUN Parallel run External FX Serial ● ● ● ● ×
Devices
231 PRUNP Parallel run External FX Serial ● ● ● ● ×
Devices
232 DPRUN Parallel run External FX Serial ● ● ● ● ×
Devices
37 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
233 DPRUNP Parallel run External FX Serial ● ● ● ● ×
Devices
234 ASCI HEX to ASCII External FX Serial ● ● ● ● ×
Devices
235 ASCIP HEX to ASCII External FX Serial ● ● ● ● ×
Devices
236 HEX ASCII to HEX External FX Serial ● ● ● ● ×
Devices
237 HEXP ASCII to HEX External FX Serial ● ● ● ● ×
Devices
238 CCD Check Code External FX Serial ● ● ● ● ×
Devices
239 CCDP Check Code External FX Serial ● ● ● ● ×
Devices
240 VRRD Volume Read External FX Serial ● ● ● ● ×
Devices
241 VRRDP Volume Read External FX Serial ● ● ● ● ×
Devices
242 VRSC Volume Scale External FX Serial ● ● ● ● ×
Devices
243 VRSCP Volume Scale External FX Serial ● ● ● ● ×
Devices
244 RS2 Serial External FX Serial ● ×
Communication 2 Devices
245 PID PID Control Loop External FX Serial ● ● ● ×
Devices
246 ANRD Analog Read Special Module ● ×
Instruction
247 ANRDP Analog Read Special Module ● ×
Instruction
248 ANWR Analog Write Special Module ● ×
Instruction
249 ANWRP Analog Write Special Module ● ×
Instruction
250 BLK BLOCK Special Module ● ×
Instruction
251 BLKP BLOCK Special Module ● ×
Instruction
252 MCDE Machine Code Special Module ● ×
Instruction
253 MCDEP Machine Code Special Module ● ×
Instruction
254 MNET Mini Net Special Module ● ×
Instruction
255 MNETP Mini Net Special Module ● ×
Instruction
256 RMMN RM Monitor Special Module ● ×
Instruction
257 RMMNP RM Monitor Special Module ● ×
Instruction
258 RMRD RM Read Special Module ● ×
Instruction
259 RMRDP RM Read Special Module ● ×
Instruction
260 RMST RM Start Special Module ● ×
Instruction
261 RMWR RM Write Special Module ● ×
Instruction
262 RMWRP RM Write Special Module ● ×
Instruction
263 ZPUSH Batch Store of Data Transfer 2 ● ×
Index Register
264 ZPUSHP Batch Store of Data Transfer 2 ● ×
Index Register
265 ZPOP Batch POP of Index Data Transfer 2 ● ×
Register
266 ZPOPP Batch POP of Index Data Transfer 2 ● ×
Register
38 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
267 DECMP Floating Point Floating Point ● ● ×
Compare
268 DECMPP Floating Point Floating Point ● ● ×
Compare
269 DEZCP Floating Point Zone Floating Point ● ● ×
Compare
270 DEZCPP Floating Point Zone Floating Point ● ● ×
Compare
271 DEMOV Floating Point Floating Point ● ○
Move
272 DEMOVP Floating Point Floating Point ● ○
Move
273 DESTR Floating Point to Floating Point ● ×
Character String
Conversion
274 DESTRP Floating Point to Floating Point ● ×
Character String
Conversion
275 DEVAL Character String to Floating Point ● ○
Floating Point
Conversion
276 DEVALP Character String to Floating Point ● ○
Floating Point
Conversion
277 DEBCD Floating Point to Floating Point ● ● ×
Scientific
278 DEBCDP Floating Point to Floating Point ● ● ×
Scientific
279 DEBIN Scientific to Floating Point ● ● ×
Floating Point
280 DEBINP Scientific to Floating Point ● ● ×
Floating Point
281 DEADD Floating Point Add Floating Point ● ● ○
282 DEADDP Floating Point Add Floating Point ● ● ○
283 DESUB Floating Point Floating Point ● ● ○
Subtract
284 DESUBP Floating Point Floating Point ● ● ○
Subtract
285 DEMUL Floating Point Floating Point ● ● ○
Multiplication
286 DEMULP Floating Point Floating Point ● ● ○
Multiplication
287 DEDIV Floating Point Floating Point ● ● ○
Division
288 DEDIVP Floating Point Floating Point ● ● ○
Division
289 DEXP Floating Point Floating Point ● △ To CP1E.No Conversion.
Exponent
290 DEXPP Floating Point Floating Point ● △ To CP1E.No Conversion.
Exponent
291 DLOGE Floating Point Floating Point ● △ To CP1E.No Conversion.
Natural Logarithm
292 DLOGEP Floating Point Floating Point ● △ To CP1E.No Conversion.
Natural Logarithm
293 DLOG10 Floating Point Floating Point ● ×
Common Logarithm
294 DLOG10P Floating Point Floating Point ● ×
Common Logarithm
295 DESQR Floating Point Floating Point ● ● △ To CP1E.No Conversion.
Square Root
296 DESQRP Floating Point Floating Point ● ● △ To CP1E.No Conversion.
Square Root
297 DENEG Floating Point Floating Point ● ×
Negation
298 DENEGP Floating Point Floating Point ● ×
Negation
299 INT Floating Point to Floating Point ● ● ○
Integer
39 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
300 INTP Floating Point to Floating Point ● ● ○
Integer
301 DINT Floating Point to Floating Point ● ● ○
Integer
302 DINTP Floating Point to Floating Point ● ● ○
Integer
303 DSIN Sine Floating Point ● ● △ To CP1E.No Conversion.
304 DSINP Sine Floating Point ● ● △ To CP1E.No Conversion.
305 DCOS Cosine Floating Point ● ● △ To CP1E.No Conversion.
306 DCOSP Cosine Floating Point ● ● △ To CP1E.No Conversion.
307 DTAN Tangent Floating Point ● ● △ To CP1E.No Conversion.
308 DTANP Tangent Floating Point ● ● △ To CP1E.No Conversion.
309 DASIN Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Sine
310 DASINP Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Sine
311 DACOS Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Cosine
312 DACOSP Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Cosine
313 DATAN Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Tangent
314 DATANP Floating Point Arc Floating Point ● △ To CP1E.No Conversion.
Tangent
315 DRAD Floating Point Floating Point ● △ To CP1E.No Conversion.
Degrees to
Radians
Conversion
316 DRADP Floating Point Floating Point ● △ To CP1E.No Conversion.
Degrees to
Radians
Conversion
317 DDEG Floating Point Floating Point ● △ To CP1E.No Conversion.
Radians to
Degrees
Conversion
318 DDEGP Floating Point Floating Point ● △ To CP1E.No Conversion.
Radians to
Degrees
Conversion
319 WSUM Sum of Word Data Data Operation 2 ● ×
320 WSUMP Sum of Word Data Data Operation 2 ● ×
321 DWSUM Sum of Word Data Data Operation 2 ● ×
322 DWSUMP Sum of Word Data Data Operation 2 ● ×
323 WTOB WORD to BYTE Data Operation 2 ● ×
324 WTOBP WORD to BYTE Data Operation 2 ● ×
325 BTOW BYTE to WORD Data Operation 2 ● ×
326 BTOWP BYTE to WORD Data Operation 2 ● ×
327 UNI 4-bit Linking of Data Operation 2 ● ×
Word Data
328 UNIP 4-bit Linking of Data Operation 2 ● ×
Word Data
329 DIS 4-bit Grouping of Data Operation 2 ● ×
Word Data
330 DISP 4-bit Grouping of Data Operation 2 ● ×
Word Data
331 SWAP Float to Scientific Data Operation 2 ● ● △ Operand includes address
out of converter range and
KSZ、KMZ. NO
conversion.
332 SWAPP Float to Scientific Data Operation 2 ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
40 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
333 DSWAP Float to Scientific Data Operation 2 ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
334 DSWAPP Float to Scientific Data Operation 2 ● ● △ Operand includes address
KSZ、KMZ. NO
conversion.
335 SORT2 Sort Tabulated Data Operation 2 ● ×
Data 2
336 DSORT2 Sort Tabulated Data Operation 2 ● ×
Data 2
337 DSZR DOG Search Zero Positioning Control ● ×
Return
338 DVIT Interrupt Positioning Control ● ×
Positioning
339 DDVIT Interrupt Positioning Control ● ×
Positioning
340 DTBL Batch Data Positioning Control ● ×
Positioning Mode
341 DABS Absolute current Positioning Control ● ● ● ● ×
value read
342 ZRN Zero return Positioning Control ● ● ● ● ×
343 DZRN Zero return Positioning Control ● ● ● ● ×
344 PLSV Pulse V Positioning Control ● ● ● ● ×
345 DPLSV Pulse V Positioning Control ● ● ● ● ×
346 DRVI Drive to increment Positioning Control ● ● ● ● ×
347 DDRVI Drive to increment Positioning Control ● ● ● ● ×
348 DDRVA Drive to absolute Positioning Control ● ● ● ● ×
349 DRVA Drive to absolute Positioning Control ● ● ● ● ×
350 TCMP Time Compare Real Time clock ● ● ● ● ×
Control
351 TCMPP Time Compare Real Time clock ● ● ● ● ×
Control
352 TZCP Time Zone Real Time clock ● ● ● ● ×
Compare Control
353 TZCPP Time Zone Real Time clock ● ● ● ● ×
Compare Control
354 TADD Time Add Real Time clock ● ● ● ● ×
Control
355 TADDP Time Add Real Time clock ● ● ● ● ×
Control
356 TSUB Time Subtract Real Time clock ● ● ● ● ×
Control
357 TSUBP Time Subtract Real Time clock ● ● ● ● ×
Control
358 HTOS Hour to second Real Time clock ● ×
conversion Control
359 HTOSP Hour to second Real Time clock ● ×
conversion Control
360 DHTOS Hour to second Real Time clock ● ×
conversion Control
361 DHTOSP Hour to second Real Time clock ● ×
conversion Control
362 STOH Second to hour Real Time clock ● ×
conversion Control
363 STOHP Second to hour Real Time clock ● ×
conversion Control
364 DSTOH Second to hour Real Time clock ● ×
conversion Control
365 DSTOHP Second to hour Real Time clock ● ×
conversion Control
366 TRD Read RTC data Real Time clock ● ● ● ● ×
Control
41 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
367 TRDP Read RTC data Real Time clock ● ● ● ● ×
Control
368 TWR Set RTC data Real Time clock ● ● ● ● ×
Control
369 TWRP Set RTC data Real Time clock ● ● ● ● ×
Control
370 DHOUR Hour meter Real Time clock ● ● ● ● ×
Control
371 HOUR Hour meter Real Time clock ● ● ● ● ×
Control
372 GRY Decimal to Gray Gray Codes ● ● ×
Code
373 GRYP Decimal to Gray Gray Codes ● ● ×
Code
374 DGRY Decimal to Gray Gray Codes ● ● ×
Code
375 DGRYP Decimal to Gray Gray Codes ● ● ×
Code
376 GBIN Gray Code to Gray Codes ● ● ×
Decimal
377 GBINP Gray Code to Gray Codes ● ● ×
Decimal
378 DGBIN Gray Code to Gray Codes ● ● ×
Decimal
379 DGBINP Gray Code to Gray Codes ● ● ×
Decimal
380 RD3A Read form External Device ● ● ● ×
Dedicated Analog
Block
381 RD3AP Read form External Device ● ● ● ×
Dedicated Analog
Block
382 WR3A Write to Dedicated External Device ● ● ● ×
Analog Block
383 WR3AP Write to Dedicated External Device ● ● ● ×
Analog Block
384 EXTR External ROM Extension Function ● ● ×
Function
385 EXTRP External ROM Extension Function ● ● ×
Function
386 DEXTR External ROM Extension Function ● ● ×
Function
387 DEXTRP External ROM Extension Function ● ● ×
Function
388 COMRD Read Device Others ● ×
Comment Data
389 COMRDP Read Device Others ● ×
Comment Data
390 RND Random Number Others ● ×
Generation
391 RNDP Random Number Others ● ×
Generation
392 DUTY Timing Pulse Others ● ×
Generation
393 CRC Cyclic Redundancy Others ● ×
Check
394 CRCP Cyclic Redundancy Others ● ×
Check
395 DHCMOV High Speed Others ● ×
Counter Move
396 ADPRW Adapter Others ● ×
397 BK+ Block Data Addition Block Data Operation ● ×
398 BK+P Block Data Addition Block Data Operation ● ×
399 DBK+ Block Data Addition Block Data Operation ● ×
400 DBK+P Block Data Addition Block Data Operation ● ×
401 BK- Block Data Block Data Operation ● ×
Subtraction
42 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
402 BK-P Block Data Block Data Operation ● ×
Subtraction
403 DBK- Block Data Block Data Operation ● ×
Subtraction
404 DBK-P Block Data Block Data Operation ● ×
Subtraction
405 BKCMP= Block Data Block Data Operation ● ×
Compare S1=S2
406 BKCMP=P Block Data Block Data Operation ● ×
Compare S1=S2
407 DBKCMP= Block Data Block Data Operation ● ×
Compare S1=S2
408 DBKCMP=P Block Data Block Data Operation ● ×
Compare S1=S2
409 BKCMP> Block Data Block Data Operation ● ×
Compare S1>S2
410 BKCMP>P Block Data Block Data Operation ● ×
Compare S1>S2
411 DBKCMP> Block Data Block Data Operation ● ×
Compare S1>S2
412 DBKCMP>P Block Data Block Data Operation ● ×
Compare S1>S2
413 BKCMP< Block Data Block Data Operation ● ×
Compare S1<S2
414 BKCMP<P Block Data Block Data Operation ● ×
Compare S1<S2
415 DBKCMP< Block Data Block Data Operation ● ×
Compare S1<S2
416 DBKCMP<P Block Data Block Data Operation ● ×
Compare S1<S2
417 BKCMP<> Block Data Block Data Operation ● ×
Compare S1<>S2
418 BKCMP<>P Block Data Block Data Operation ● ×
Compare S1<>S2
419 DBKCMP<> Block Data Block Data Operation ● ×
Compare S1<>S2
420 DBKCMP<>P Block Data Block Data Operation ● ×
Compare S1<>S2
421 BKCMP<= Block Data Block Data Operation ● ×
Compare S1<=S2
422 BKCMP<=P Block Data Block Data Operation ● ×
Compare S1<=S2
423 DBKCMP<= Block Data Block Data Operation ● ×
Compare S1<=S2
424 DBKCMP<=P Block Data Block Data Operation ● ×
Compare S1<=S2
425 BKCMP>= Block Data Block Data Operation ● ×
Compare S1>=S2
426 BKCMP>=P Block Data Block Data Operation ● ×
Compare S1>=S2
427 DBKCMP>= Block Data Block Data Operation ● ×
Compare S1>=S2
428 DBKCMP>=P Block Data Block Data Operation ● ×
Compare S1>=S2
429 STR BIN to Character Character String ● ×
String Control
Conversion
430 STRP BIN to Character Character String ● ×
String Control
Conversion
431 DSTR BIN to Character Character String ● ×
String Control
Conversion
432 DSTRP BIN to Character Character String ● ×
String Control
Conversion
43 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
433 VAL Character String to Character String ● ×
BIN Control
Conversion
434 VALP Character String to Character String ● ×
BIN Control
Conversion
435 DVAL Character String to Character String ● ×
BIN Control
Conversion
436 DVALP Character String to Character String ● ×
BIN Control
Conversion
437 $+ Link Character Character String ● △ To CP1E.No Conversion.
Strings Control
438 $+P Link Character Character String ● △ To CP1E.No Conversion.
Strings Control
439 LEN Character String Character String ● △ To CP1E.No Conversion.
Length Control
Detection
440 LENP Character String Character String ● △ To CP1E.No Conversion.
Length Control
Detection
441 RIGHT Extracting Character String ● △ Operand includes address
Character String Control out of converter range and
Data from the Right KX、KY、KM、KS、TV、
TZ、CV、CZ、DV、DZ、
KXZ、KYZ、KSZ、KMZ.
NO conversion.
To CP1E.No Conversion.
442 RIGHTP Extracting Character String ● △ Operand includes address
Data from the Right KX、KY、KM、KS、TV、
NO conversion.
443 LEFT Extracting Character String ● △ Operand includes address
Data from the Left KX、KY、KM、KS、TV、
NO conversion.
444 LEFTP Extracting Character String ● △ Operand includes address
Data from the Left KX、KY、KM、KS、TV、
NO conversion.
445 MIDR Random Selection Character String ● ×
of Character Control
Strings
446 MIDRP Random Selection Character String ● ×
of Character Control
Strings
447 MIDW Random Character String ● ×
Replacement of Control
Character Strings
448 MIDWP Random Character String ● ×
Replacement of Control
Character Strings
449 INSTR Character string Character String ● ×
search Control
450 INSTRP Character string Character String ● ×
search Control
451 $MOV Character String Character String ● ○ To CP1E.No Conversion.
Transfer Control
44 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
452 $MOVP Character String Character String ● ○ To CP1E.No Conversion.
Transfer Control
453 FDEL Deleting Data from Data Operation 3 ● △ Operand includes address
Tables out of converter range and
TV、TZ、CV、CZ、DV、
DZ. NO conversion.
454 FDELP Deleting Data from Data Operation 3 ● △ Operand includes address
DZ. NO conversion.
455 FINS Inserting Data to Data Operation 3 ● △ Operand includes address
DZ. NO conversion.
456 FINSP Inserting Data to Data Operation 3 ● △ Operand includes address
DZ.NO conversion.
457 POP Shift Last Data Data Operation 3 ● ×
Read
FILO Control
458 POPP Shift Last Data Data Operation 3 ● ×
Read
FILO Control
459 SFR Bit Shift Right with Data Operation 3 ● ○
Carry
460 SFRP Bit Shift Right with Data Operation 3 ● ○
Carry
461 SFL Bit Shift Left with Data Operation 3 ● ○
Carry
462 SFLP Bit Shift Left with Data Operation 3 ● ○
Carry
463 LD= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
TV、CZ、CV、DZ、DV. NO
conversion.
464 LDD= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
465 LD> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
466 LD< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
467 LDD> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
468 LDD< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
45 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
469 LD<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
470 LDD<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
471 LD<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
472 LDD<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
473 LD>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
474 LDD>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
475 AND= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
476 ANDD= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
477 AND> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
478 ANDD> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
479 AND< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
480 ANDD< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
481 AND<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
46 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
482 ANDD<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
483 AND<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
484 ANDD<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
485 AND>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
486 ANDD>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
487 OR= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
488 ORD= (S1)=(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
489 OR> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
490 ORD> (S1)>(S1) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
491 OR< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
492 ORD< (S1)<(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
493 OR<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
494 ORD<> (S1)≠(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
47 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
495 OR<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
496 ORD<= (S1)≦(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
497 OR>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
498 ORD>= (S1)≧(S2) Inline Comparisons ● ● ● ● △ Operand includes KZ、KV、
conversion.
499 LIMIT Limit Control Data Table Operation ● ×
500 LIMITP Limit Control Data Table Operation ● ×
501 DLIMIT Limit Control Data Table Operation ● ×
502 DLIMITP Limit Control Data Table Operation ● ×
503 BAND Dead Band Control Data Table Operation ● ×
504 BANDP Dead Band Control Data Table Operation ● ×
505 DBAND Dead Band Control Data Table Operation ● ×
506 DBANDP Dead Band Control Data Table Operation ● ×
507 ZONE Zone Control Data Table Operation ● ×
508 ZONEP Zone Control Data Table Operation ● ×
509 DZONE Zone Control Data Table Operation ● ×
510 DZONEP Zone Control Data Table Operation ● ×
511 SCL Scaling Data Table Operation ● ×
(Coordinate by
Point Data)
512 SCLP Scaling Data Table Operation ● ×
(Coordinate by
Point Data)
513 DSCL Scaling Data Table Operation ● ×
(Coordinate by
Point Data)
514 DSCLP Scaling Data Table Operation ● ×
(Coordinate by
Point Data)
515 DABIN Decimal ASCII to Data Table Operation ● ×
BIN
Conversion
516 DABINP Decimal ASCII to Data Table Operation ● ×
BIN
Conversion
517 DDABIN Decimal ASCII to Data Table Operation ● ×
BIN
Conversion
518 DDABINP Decimal ASCII to Data Table Operation ● ×
BIN
Conversion
519 BINDA BIN to Decimal Data Table Operation ● ×
ASCII
Conversion
520 BINDAP BIN to Decimal Data Table Operation ● ×
ASCII
Conversion
521 DBINDA BIN to Decimal Data Table Operation ● ×
ASCII
Conversion
522 DBINDAP BIN to Decimal Data Table Operation ● ×
ASCII
Conversion
48 / 56
Fx Fx Fx Fx Convert
3 2 1N 1S Status
523 SCL2 Scaling 2 Data Table Operation ● ×
(Coordinate by X/Y
Data)
524 SCL2P Scaling 2 Data Table Operation ● ×
(Coordinate by X/Y
Data)
525 DSCL2 Scaling 2 Data Table Operation ● ×
(Coordinate by X/Y
Data)
526 DSCL2P Scaling 2 Data Table Operation ● ×
(Coordinate by X/Y
Data)
527 IVCK Inverter Status External Device ● ×
Check Communication
528 IVDR Inverter Drive External Device ● ×
Communication
529 IVRD Inverter Parameter External Device ● ×
Read Communication
530 IVWR Inverter Parameter External Device ● ×
Write Communication
531 IVBWR Inverter Parameter External Device ● ×
Block Write Communication
532 RBFM Divided BFM Read Data Transfer 3 ● ×
533 WBFM Divided BFM Write Data Transfer 3 ● ×
534 DHSCT High Speed High Speed ● ×
Counter Compare Processing 2
With Data Table
535 LOADR Load From ER Extension File ● ×
Register Control
536 LOADRP Load From ER Extension File ● ×
Register Control
537 SAVER Save to ER Extension File ● ×
Register Control
538 INITR Initialize R and ER Extension File ● ×
Register Control
539 INITRP Initialize R and ER Extension File ● ×
Register Control
540 LOGR Logging R and ER Extension File ● ×
Register Control
541 LOGRP Logging R and ER Extension File ● ×
Register Control
542 RWER Rewrite to ER Extension File ● ×
Register Control
543 RWERP Rewrite to ER Extension File ● ×
Register Control
544 INITER Initialize ER Extension File ● ×
Register Control
545 INITERP Initialize ER Extension File ● ×
Register Control
49 / 56
(2) Siemens PLC Instruction Convert List
(Note: Specific conversion information, refer to Appendix: Siemens Convert Specification)
Instruction Convert
No. Class Function Remark
(S7-200) Status
1 AENO Bit Logic Instructions And ENO ○
2 LD Bit Logic Instructions Load ○
3 LDN Bit Logic Instructions Load Not ○
4 A Bit Logic Instructions And ○
5 AN Bit Logic Instructions And Not ○
6 O Bit Logic Instructions Or ○
7 ON Bit Logic Instructions Or Not ○
8 LDI Bit Logic Instructions Load immediate ○
9 LDNI Bit Logic Instructions Load Not immediate ○
10 AI Bit Logic Instructions And immediate ○
11 ANI Bit Logic Instructions And Not immediate ○
12 OI Bit Logic Instructions Or immediate ○
13 ONI Bit Logic Instructions Or Not immediate ○
14 ALD Bit Logic Instructions And Block ○
15 OLD Bit Logic Instructions Or Block ○
16 NOT Bit Logic Instructions Not ○
17 EU Bit Logic Instructions Pulse ○
18 ED Bit Logic Instructions Falling Pulse ○
19 = Bit Logic Instructions Output ○
20 =I Bit Logic Instructions Output immediate ○
21 S Bit Logic Instructions Set ○
22 R Bit Logic Instructions Reset ○
23 SI Bit Logic Instructions Set immediate ×
24 RI Bit Logic Instructions Reset immediate ×
25 SR Bit Logic Instructions Set Dominant Bistable ○
Reset Dominant Bistable
26 RS Bit Logic Instructions
instruction
×
27 NOP Bit Logic Instructions Nop ×

28 LDB= Compare Instructions Compare Load Byte N1=N2 ○
29 LDB< Compare Instructions Compare Load Byte N1<N2 ○
30 LDB> Compare Instructions Compare Load Byte N1>N2 ○
31 LDB<> Compare Instructions Compare Load Byte N1<>N2 ○
32 LDB<= Compare Instructions Compare Load Byte N1<=N2 ○
33 LDB>= Compare Instructions Compare Load Byte N1>=N2 ○
34 LDW= Compare Instructions Compare Load Word N1=N2 ○
35 LDW< Compare Instructions Compare Load Word N1<N2 ○
36 LDW> Compare Instructions Compare Load Word N1>N2 ○
37 LDW<> Compare Instructions Compare Load Word N1<>N2 ○
38 LDW<= Compare Instructions Compare Load Word N1<=N2 ○
39 LDW>= Compare Instructions Compare Load Word N1>=N2 ○
Compare Load Double Word
40 LDD= Compare Instructions
N1=N2
○
41 LDD< Compare Instructions
N1<N2
○
42 LDD> Compare Instructions
N1>N2
○
50 / 56
Instruction Convert
(S7-200) Status
43 LDD<> Compare Instructions ○
N1<>N2
44 LDD<= Compare Instructions ○
N1<=N2
45 LDD>= Compare Instructions ○
N1>=N2
46 LDR= Compare Instructions Compare Load Real N1=N2 ○
47 LDR< Compare Instructions Compare Load Real N1<N2 ○
48 LDR> Compare Instructions Compare Load Real N1>N2 ○
49 LDR<> Compare Instructions Compare Load Real N1<>N2 ○
50 LDR<= Compare Instructions Compare Load Real N1<=N2 ○
51 LDR>= Compare Instructions Compare Load Real N1>=N2 ○
52 AB= Compare Instructions Compare And Byte N1=N2 ○
53 AB< Compare Instructions Compare And Byte N1<N2 ○
54 AB> Compare Instructions Compare And Byte N1>N2 ○
55 AB<> Compare Instructions Compare And Byte N1<>N2 ○
56 AB<= Compare Instructions Compare And Byte N1<=N2 ○
57 AB>= Compare Instructions Compare And Byte N1>=N2 ○
58 AW= Compare Instructions Compare And Word N1=N2 ○
59 AW< Compare Instructions Compare And Word N1<N2 ○
60 AW> Compare Instructions Compare And Word N1>N2 ○
61 AW<> Compare Instructions Compare And Word N1<>N2 ○
62 AW<= Compare Instructions Compare And Word N1<=N2 ○
63 AW>= Compare Instructions Compare And Word N1=>N2 ○
Compare And Double Word
64 AD= Compare Instructions ○
N1=N2
65 AD< Compare Instructions ○
N1<N2
66 AD> Compare Instructions ○
N1>N2
67 AD<> Compare Instructions ○
N1<>N2
68 AD<= Compare Instructions ○
N1<=N2
69 AD>= Compare Instructions ○
N1>=N2
70 AR= Compare Instructions Compare And Real N1=N2 ○
71 AR< Compare Instructions Compare And Real N1<N2 ○
72 AR> Compare Instructions Compare And Real N1>N2 ○
73 AR<> Compare Instructions Compare And Real N1<>N2 ○
74 AR<= Compare Instructions Compare And Real N1<=N2 ○
75 AR>= Compare Instructions Compare And Real N1>=N2 ○
76 OB= Compare Instructions Compare Or Byte N1=N2 ○
77 OB< Compare Instructions Compare Or Byte N1<N2 ○
78 OB> Compare Instructions Compare Or Byte N1>N2 ○
79 OB<> Compare Instructions Compare Or Byte N1<>N2 ○
80 OB<= Compare Instructions Compare Or Byte N1<=N2 ○
81 OB>= Compare Instructions Compare Or Byte N1>=N2 ○
82 OW= Compare Instructions Compare Or Word N1=N2 ○
83 OW< Compare Instructions Compare Or Word N1<N2 ○
84 OW> Compare Instructions Compare Or Word N1>N2 ○
51 / 56
Instruction Convert
(S7-200) Status
85 OW<> Compare Instructions Compare Or Word N1<>N2 ○
86 OW<= Compare Instructions Compare Or Word N1<=N2 ○
87 OW>= Compare Instructions Compare Or Word N1=>N2 ○
Compare Or Double Word
88 OD= Compare Instructions
N1=N2
○
89 OD< Compare Instructions
N1<N2
○
90 OD> Compare Instructions
N1>N2
○
91 OD<> Compare Instructions
N1<>N2
○
92 OD<= Compare Instructions
N1<=N2
○
93 OD>= Compare Instructions
N1>=N2
○
94 OR= Compare Instructions Compare Or Real N1=N2 ○

95 OR< Compare Instructions Compare Or Real N1<N2 ○
96 OR> Compare Instructions Compare Or Real N1>N2 ○
97 OR<> Compare Instructions Compare Or Real N1<>N2 ○
98 OR<= Compare Instructions Compare Or Real N1<=N2 ○
99 OR>= Compare Instructions Compare Or Real N1>=N2 ○
100 LDS= Compare Instructions Compare Load String IN1=IN2 ×
101 LDS<> Compare Instructions Compare Load String IN1<>IN2 ×
102 AS= Compare Instructions Compare And String IN1=IN2 ×
103 AS<> Compare Instructions Compare And String IN1<>IN2 ×
104 OS= Compare Instructions Compare Or String IN1=IN2 ×
105 OS<> Compare Instructions Compare Or String IN1<>IN2 ×
106 TON Timer Instructions On-Delay Timer ○
107 TONR Timer Instructions Retentive On-Delay Timer ○
108 TOF Timer Instructions Off-Delay Timer ×
109 TP Timer Instructions Pulse Timer ×
110 BGN_ITIME Timer Instructions Beginning Interval Time ×
111 CAL_ITIME Timer Instructions Calculate Interval Time ×
112 CTU Counter Instructions CU increments the current value ○
CU increments the current value
113 CTUD Counter Instructions CD decrements the current ○
value
CD decrements the current
114 CTD Counter Instructions
value
○
115 ADD_I Math Instructions Add Integer IN1+OUT=OUT ○

116 SUB_I Math Instructions Subtract Integer IN1-OUT=OUT ○
Add double Integer
117 ADD_DI Math Instructions
IN1+OUT=OUT
○
118 SUB_DI Math Instructions Subtract Integer IN1-OUT=OUT ○

119 MUL_I Math Instructions Multiply Interger IN1*OUT=OUT ○
120 DIV_I Math Instructions Divide Interger IN1/OUT=OUT ○
Multiply Double Interger
121 MUL_DI Math Instructions
IN1*OUT=OUT
○
Divide Double Interger
122 DIV_DI Math Instructions
IN1/OUT=OUT
○
Multiply Integer to Double
123 MUL Math Instructions
Interger（16*16-〉32）
○
124 DIV Math Instructions Divide Interger（16/16-〉32） ○

52 / 56
Instruction Convert
(S7-200) Status
125 INCB Math Instructions Bit Increment ○
126 DECB Math Instructions Bit Decrement ○
127 INCW Math Instructions Word Increment ○
128 DECW Math Instructions Word Decrement ○
129 INCD Math Instructions Double Word Increment ○
130 DECD Math Instructions Double Word Decrement ○
131 ADD_R Real Math Instructions Add Real IN1+OUT=OUT ○
132 SUB_R Real Math Instructions Subtract Real IN1-OUT=OUT ○
133 MUL_R Real Math Instructions Multiply Real IN1*OUT=OUT ○
134 DIV_R Real Math Instructions Divide Real IN1/OUT=OUT ○
135 SQRT Real Math Instructions Square Root ×
136 LN Real Math Instructions Natural Logarithm ×
137 EXP Real Math Instructions Natural Exponential ×
138 SIN Real Math Instructions Sine ×
139 COS Real Math Instructions Cosine ×
140 TAN Real Math Instructions Tangent ×
141 PID Real Math Instructions PID Loop ×
142 MOV_B Move Instructions Move Byte ○
143 MOV_W Move Instructions Move Word ○
144 MOV_DW Move Instructions Move Double Word ○
145 MOV_R Move Instructions Move Real ○
146 BLKMOV_B Move Instructions Block Move Byte ×
BLKMOV_
147 W
Move Instructions Block Move Word ○
148 BLKMOV_D Move Instructions Block Move Double Word ○

149 SWAP Move Instructions Conversion Byet ○
150 MOV_BIR Move Instructions Move Byte Immediate Read ×
151 MOV_BIW Move Instructions Move Byte Immediate Write ×
Logical Operations
152 WAND_B
Instructions
And Byte ○
Logical Operations
153 WOR_B
Instructions
Or Byte ○
Logical Operations
154 WXOR_B
Instructions
Exclusive Or Byet ○
Logical Operations
155 WAND_W
Instructions
And Word ○
Logical Operations
156 WOR_W
Instructions
Or Word ○
Logical Operations
157 WXOR_W
Instructions
Exclusive Or Word ○
Logical Operations
158 WAND_DW
Instructions
And Double Word ○
Logical Operations
159 WOR_DW
Instructions
Or Double Word ○
Logical Operations
160 WXOR_DW
Instructions
Exclusive Or Double Word ○
Logical Operations
161 INV_B
Instructions
Invert Byte ○
Logical Operations
162 INV_W
Instructions
Invert Word、 ○
Logical Operations
163 INV_DW
Instructions
Invert Double Word ○
53 / 56
Instruction Convert
(S7-200) Status
Shift and Rotate
164 SHR_B Shift Right Byte ×
Instructions
Shift and Rotate
165 SHL_B Shift Left Byte ×
Instructions
Shift and Rotate
166 SHR_W Shift Right Word ○
Instructions
Shift and Rotate
167 SHL_W Shift Left Word ○
Instructions
Shift and Rotate
168 SHR_DW Shift Right Double Word ○
Instructions
Shift and Rotate
169 SHL_DW Shift Left Double Word ○
Instructions
Shift and Rotate
170 ROR_B Rotate Right Byte ×
Instructions
Shift and Rotate
171 ROL_B Rotate Left Byte ×
Instructions
Shift and Rotate
172 ROR_W Rotate Right Word ○
Instructions
Shift and Rotate
173 ROL_W Rotate Left Word ○
Instructions
Shift and Rotate
174 ROR_DW Rotate Right Double Word ○
Instructions
Shift and Rotate
175 ROL_DW Rotate Left Double Word ○
Instructions
Shift and Rotate
176 SHRB Shift and Rotate Register ×
Instructions
Conversion
177 BCD_I BCD to integer ○
Instructions
Conversion
178 I_BCD Integer to BCD ○
Instructions
Conversion
179 DI_R(DTR) Double Integer to Real ○
Instructions
Conversion
180 ROUND Round ○
Instructions
Conversion
181 TRUNC Truncate ○
Instructions
Conversion
182 DI_I Double Integer to Integer ×
Instructions
Conversion
183 I_DI Integer to Double Integer ○
Instructions
Conversion
184 B_I Byte to Integer ×
Instructions
Conversion
185 I_B Interger to byte ×
Instructions
Conversion
186 DECO Decode ○
Instructions
Conversion
187 ENCO Encode ○
Instructions
Conversion
188 SEG Segment ○
Instructions
Conversion
189 ATH ASCll to Hexadecimal ×
Instructions
Conversion
190 HTA Hexadecimal to ASCll ×
Instructions
Conversion
191 ITA Integer to ASCll ×
Instructions
Conversion
192 DTA Double Integer to ASCll ×
Instructions
Conversion
193 RTA Real to ASCll ×
Instructions
Conversion
194 I_S Integer to String ×
Instructions
54 / 56
Instruction Convert
(S7-200) Status
Conversion
195 DI_S Double Integer to String ×
Instructions
Conversion
196 R_S Real to String ○
Instructions
Conversion
197 S_I String to Integer ×
Instructions
Conversion
198 S_DI String to Double Integer ×
Instructions
Conversion
199 S_R String to Real ○
Instructions
Program Control
200 JMP Jump to Label ○
Instructions
Program Control
201 LBL Label ○
Instructions
Program Control
202 SBR Subroutine Start ○
Instructions
Program Control Condutional Return from
203 CRET ×
Instructions Subroutine
Program Control
204 FOR For/Next Loop ○
Instructions
Program Control
205 NEXT For/Next Loop ○
Instructions
Program Control
206 SCR Load SCR ○
Instructions
Program Control
207 SCRT SCR Transition ○
Instructions
Program Control
208 CSCRE Conditional SCR End ×
Instructions
Program Control
209 SCRE SCR End ×
Instructions
Program Control
210 CALL Call Subroutine ○
Instructions
FOR/NEXT loop number
Program Control
211 FINAL
Instructions
(Included in FOR when ○
converted)
Program Control
212 END
Instructions
END ×
Program Control
213 DIAG_LED
Instructions
Diagnostic LED ×
Program Control
214 STOP
Instructions
Stop ×
Program Control
215 WDR
Instructions
Watchdot Reset（300ms） ×
Logic Stack
216 LPS
Instructions
Logic Push ○
Logic Stack
217 LRD
Instructions
Logic Read ○
Logic Stack
218 LPP
Instructions
Logic Pop ○
Logic Stack
219 LDS
Instructions
Load Stack ×
High-Speed Counter
220 HDEF
Instructions
High-Speed Counter Definition ×
High-Speed Counter
221 HSC
Instructions
High-Speed Counter ×
High-Speed Counter
222 PLS
Instructions
Pulse Output ×
223 READ_RTC Clock Instructions Read-Time Clock ×

224 SET_RTC Clock Instructions Set Read-Time Clock ×
READ_RTC
225 Clock Instructions Read Real Time Clock Extended ×
X
55 / 56
Instruction Convert
(S7-200) Status
226 SET_RTCX Clock Instructions Set Real Time Clock Extended ×
227 ATT Table Instructions Add to Table ×
228 FND= Table Instructions Table Find ×
229 FND<> Table Instructions Table Find ×
230 FND< Table Instructions Table Find ×
231 FND> Table Instructions Table Find ×
232 FIFO Table Instructions First-In-First-Out ×
233 LIFO Table Instructions Last-In-First-Out ×
234 FILL Table Instructions Memory Fill ×
235 ATCH Interrupt Instructions Attach Interrupt ×
236 DTCH Interrupt Instructions Detach Interrupt ×
237 CRETI Interrupt Instructions Conditional Return from Interrupt ×
238 ENI Interrupt Instructions Enable Interrupt ×
239 DISI Interrupt Instructions Disable Interrupt ×
240 CEVNT Interrupt Instructions Clear Interrupt Event ×
Communications
241 NETR
Instructions
Network Read ×
Communications
242 NETW
Instructions
Network Write ×
Communications
243 XMT
Instructions
Transmit ×
Communications
244 RCV
Instructions
Receive ×
Communications
245 GET_ADDR
Instructions
Get Port Address ×
Communications
246 SET_ADDR
Instructions
Set Port Address ×
247 STR_LEN String Instructions String Length ×

248 STR_CPY String Instructions Copy String ×
249 STR_CAT String Instructions Concatenate String ×
250 SSTR_CPY String Instructions Copy Substring from String ×
251 STR_FIND String Instructions Find String Within String ×
Find First Character Within
252 CHR_FIND String Instructions
String
×
56 / 56
Operation Manual - Appendix
Mitsubishi Convert Specification
Rev 1.10
CONTENTS
Appendix 1: Mitsubishi Instruction Convert List ..................................................................4

Appendix 2: Mitsubishi Instruction Convert Solution 1: N ................................................22
OUT instruction ........................................................................................................22
RST instruction.........................................................................................................22
CJ instruction............................................................................................................23
CJP instruction .........................................................................................................23
FOR instruction ........................................................................................................24
CMP instruction ........................................................................................................25
CMPP instruction......................................................................................................28
DCMP instruction .....................................................................................................31
DCMPP instruction ...................................................................................................34
ZCP instruction.........................................................................................................37
ZCPP instruction ......................................................................................................42
DZCP instruction ......................................................................................................46
DZCPP instruction....................................................................................................50
MOV instruction........................................................................................................53
MOVP instruction .....................................................................................................54
DMOV instruction .....................................................................................................55
DMOVP instruction...................................................................................................56
BMOV instruction .....................................................................................................57
BMOVP instruction ...................................................................................................59
BCD instruction ........................................................................................................61
BCDP instruction ......................................................................................................62
DBCD instruction......................................................................................................63
DBCDP instruction ...................................................................................................64
BIN instruction ..........................................................................................................65
BINP instruction........................................................................................................66
DBIN instruction .......................................................................................................67
DBINP instruction .....................................................................................................68
ADD instruction ........................................................................................................69
ADDP instruction ......................................................................................................71
DADD instruction......................................................................................................72
DADDP instruction ...................................................................................................73
SUB instruction.........................................................................................................75
SUBP instruction ......................................................................................................76
DSUB instruction ......................................................................................................78
DSUBP instruction....................................................................................................80
MUL instruction ........................................................................................................82
MULP instruction ......................................................................................................83
DMUL instruction......................................................................................................85
DMULP instruction ...................................................................................................86
DIV instruction ..........................................................................................................88
2
DIVP instruction........................................................................................................90
DDIV instruction .......................................................................................................92
DDIVP instruction .....................................................................................................93
INC instruction..........................................................................................................95
INCP instruction .......................................................................................................96
DINC instruction .......................................................................................................97
DINCP instruction.....................................................................................................98
DEC instruction ........................................................................................................99
DECP instruction ....................................................................................................100
DDEC instruction....................................................................................................101
DDECP instruction .................................................................................................102
WAND instruction ...................................................................................................103
WANDP instruction.................................................................................................105
DAND instruction....................................................................................................106
DANDPinstruction ..................................................................................................108
WOR instruction .....................................................................................................110
WORP instruction...................................................................................................111
DOR instruction ......................................................................................................113
DORP instruction....................................................................................................114
WXOR instruction...................................................................................................116
WXORP instruction ................................................................................................117
DXOR instruction....................................................................................................119
DXORP instruction .................................................................................................120
SFTR instruction.....................................................................................................122
SFTRP instruction ..................................................................................................122
SFTL instruction .....................................................................................................122
SFTLP instruction...................................................................................................122
SFWR instruction ...................................................................................................123
SFWRP instruction .................................................................................................126
SFRD instruction ....................................................................................................129
SFRDP instruction..................................................................................................131
ZRST instruction.....................................................................................................133
ZRSTP instruction ..................................................................................................134
DECO instruction....................................................................................................135
DECOP instruction .................................................................................................139
ENCO instruction....................................................................................................145
ENCOP instruction .................................................................................................146
Appendix 3: Mitsubishi I/O Memory Convert Table ..........................................................148
3
Appendix 1: Mitsubishi Instruction Convert List
Convert Solution: 1: 1: Convert Solution 1: 1
1: N: Convert Solution 1: N
×: No Convert Solution
No. Source Destination CP CP CP Function
Instruction Instruction 1H 1L 1E
1 LD LD 1:1 1:1 1:1 Load
2 LDI LDNOT 1:1 1:1 1:1 Load Inverse
3 LDP @LD 1:1 1:1 1:1 Load Pulse
4 LDF %LD 1:1 1:1 1:1 Load Falling Pulse
5 AND AND 1:1 1:1 1:1 And
6 ANI ANDNOT 1:1 1:1 1:1 And Inverse
7 ANDP @AND 1:1 1:1 1:1 And Pulse
8 ANDF %AND 1:1 1:1 1:1 And Falling Pulse
9 OR OR 1:1 1:1 1:1 Or
10 ORI ORNOT 1:1 1:1 1:1 Or Inverse
11 ORP @OR 1:1 1:1 1:1 Or Pulse
12 ORF %OR 1:1 1:1 1:1 Or Falling Pulse
13 ANB ANDLD 1:1 1:1 1:1 And Block
14 ORB ORLD 1:1 1:1 1:1 Or Block
15 MPS OUT TR 1:1 1:1 1:1 Memory Point Store
16 MRD LD TR 1:1 1:1 1:1 Memory Read
17 MPP LD TR 1:1 1:1 1:1 Memory POP
18 INV NOT 1:1 1:1 1:1 Inverse
19 MEF DOWN 1:1 × × MEF
20 MEP UP 1:1 × × MEP
21 OUT OUT 1:1 1:1 1:1 Out
22 OUT [C] TIMX/TIMHX/TMHHX/ 1:1 1:1 1:1 Out
TTIMX
23 OUT [T] CNTX 1:1 1:1 1:1 Out
24 SET SET 1:1 1:1 1:1 Set
25 RST RST 1:1 1:1 1:1 Reset
26 PLS DIFU 1:1 1:1 1:1 Pulse
27 PLF DIFD 1:1 1:1 1:1 Falling pulse
28 MC MILR 1:1 1:1 1:1 Master Control
29 MCR MILC 1:1 1:1 1:1 Master control reset
30 NOP NOP 1:1 1:1 1:1 No Operation
31 END END 1:1 1:1 1:1 End
32 STL MI_STL × × × Step Ladder
33 RET MI_RET × × × Return
34 CJ CJP 1:1 1:1 1:1 Conditional jump
35 CJP Refer to Appendix 2 1:N 1:N 1:N Conditional jump
Convert Solution
4
36 CALL SBS 1:1 1:1 1:1 Call Subroutine
37 CALLP @SBS 1:1 1:1 1:1 Call Subroutine
38 SRET RET 1:1 1:1 1:1 Subroutine Return
39 IRET MI_IRET × × × Interrupt Return
40 EI EI 1:1 1:1 1:1 Enable Iinterrupt
41 DI DI 1:1 1:1 1:1 Disable Interrupt
42 FEND END 1:1 1:1 1:1 Main Routine Program
End
43 WDT WDT 1:1 1:1 1:1 Watchdog Timer Refresh
44 WDTP @WDT 1:1 1:1 1:1 Watchdog Timer Refresh
45 FOR FOR 1:1 1:1 1:1 Start of a For/Next loop
46 NEXT NEXT 1:1 1:1 1:1 End a For/Next loop
47 CMP Refer to Appendix 2 1:N 1:N 1:N Compare
Convert Solution
48 CMPP Refer to Appendix 2 1:N 1:N 1:N Compare
Convert Solution
49 DCMP Refer to Appendix 2 1:N 1:N 1:N Compare
Convert Solution
50 DCMPP Refer to Appendix 2 1:N 1:N 1:N Compare
Convert Solution
51 ZCP Refer to Appendix 2 1:N 1:N 1:N Zone Compare
Convert Solution
52 ZCPP Refer to Appendix 2 1:N 1:N 1:N Zone Compare
Convert Solution
53 DZCP Refer to Appendix 2 1:N 1:N 1:N Zone Compare
Convert Solution
54 DZCPP Refer to Appendix 2 1:N 1:N 1:N Zone Compare
Convert Solution
55 MOV MOV 1:1 1:1 1:1 Move
56 MOVP @MOV 1:1 1:1 1:1 Move
57 DMOV MOVL 1:1 1:1 1:1 Move
58 DMOVP @MOVL 1:1 1:1 1:1 Move
59 SMOV MI_SMOV × × × Shift Move
60 SMOVP MI_SMOVP × × × Shift Move
61 CML MVN 1:1 1:1 × Complement
62 CMLP @MVN 1:1 1:1 × Complement
63 DCML MVNL 1:1 1:1 × Complement
64 DCMLP @MVNL 1:1 1:1 × Complement
65 BMOV XFER 1:1 1:1 1:1 Block Move
66 BMOVP @XFER 1:1 1:1 1:1 Block Move
67 FMOV MI_FMOV × × × Fill Move
5
68 FMOVP MI_FMOVP × × × Fill Move
69 DFMOV MI_DFMOV × × × Fill Move
70 DFMOVP MI_DFMOVP × × × Fill Move
71 XCH XCHG 1:1 1:1 1:1 Exchange
72 XCHP @XCHG 1:1 1:1 1:1 Exchange
73 DXCH XCGL 1:1 1:1 × Exchange
74 DXCHP @XCGL 1:1 1:1 × Exchange
75 BCD BCD 1:1 1:1 1:1 Conversion to Binary
Coded Decimal
76 BCDP @BCD 1:1 1:1 1:1 Conversion to Binary
Coded Decimal
77 DBCD BCDL 1:1 1:1 1:1 Conversion to Binary
Coded Decimal
78 DBCDP @BCDL 1:1 1:1 1:1 Conversion to Binary
Coded Decimal
79 BIN BIN 1:1 1:1 1:1 Conversion to Binary
80 BINP @BIN 1:1 1:1 1:1 Conversion to Binary
81 DBIN BINL 1:1 1:1 1:1 Conversion to Binary
82 DBINP @BINL 1:1 1:1 1:1 Conversion to Binary
83 ADD + 1:1 1:1 1:1 Addition
84 ADDP @+ 1:1 1:1 1:1 Addition
85 DADD +L 1:1 1:1 1:1 Addition
86 DADDP @+L 1:1 1:1 1:1 Addition
87 SUB - 1:1 1:1 1:1 Subtraction
88 SUBP @- 1:1 1:1 1:1 Subtraction
89 DSUB -L 1:1 1:1 1:1 Subtraction
90 DSUBP @-L 1:1 1:1 1:1 Subtraction
91 MUL * 1:1 1:1 1:1 Multiplication
92 MULP @* 1:1 1:1 1:1 Multiplication
93 DMUL *L 1:1 1:1 1:1 Multiplication
94 DMULP @*L 1:1 1:1 1:1 Multiplication
95 DIV / 1:1 1:1 1:1 Division
96 DIVP @/ 1:1 1:1 1:1 Division
97 DDIV /L 1:1 1:1 1:1 Division
98 DDIVP @/L 1:1 1:1 1:1 Division
99 INC ++ 1:1 1:1 1:1 Increment
100 INCP @++ 1:1 1:1 1:1 Increment
101 DINC ++L 1:1 1:1 1:1 Increment
102 DINCP @++L 1:1 1:1 1:1 Increment
103 DEC -- 1:1 1:1 1:1 Decrement
104 DECP @-- 1:1 1:1 1:1 Decrement
6
105 DDEC --L 1:1 1:1 1:1 Decrement
106 DDECP @--L 1:1 1:1 1:1 Decrement
107 WAND ANDW 1:1 1:1 1:1 Logical Word AND
108 WANDP @ANDW 1:1 1:1 1:1 Logical Word AND
109 DAND ANDL 1:1 1:1 1:1 Logical Word AND
110 DANDP @ANDL 1:1 1:1 1:1 Logical Word AND
111 WOR ORW 1:1 1:1 1:1 Logical Word OR
112 WORP @ORW 1:1 1:1 1:1 Logical Word OR
113 DOR ORWL 1:1 1:1 1:1 Logical Word OR
114 DORP @ORWL 1:1 1:1 1:1 Logical Word OR
115 WXOR XORW 1:1 1:1 1:1 Logical Exclusive OR
116 WXORP @XORW 1:1 1:1 1:1 Logical Exclusive OR
117 DXOR XORL 1:1 1:1 1:1 Logical Exclusive OR
118 DXORP @XORL 1:1 1:1 1:1 Logical Exclusive OR
119 NEG NEG 1:1 1:1 1:1 Negation
120 NEGP @NEG 1:1 1:1 1:1 Negation
121 DNEG NEGL 1:1 1:1 1:1 Negation
122 DNEGP @NEGL 1:1 1:1 1:1 Negation
123 ROR MI_ROR × × × Rotation Right
124 RORP MI_RORP × × × Rotation Right
125 DROR MI_DROR × × × Rotation Right
126 DRORP MI_DRORP × × × Rotation Right
127 ROL MI_ROL × × × Rotation Left
128 ROLP MI_ROLP × × × Rotation Left
129 DROL MI_DROL × × × Rotation Left
130 DROLP MI_DROLP × × × Rotation Left
131 RCR MI_RCR × × × Rotation Right with Carry
132 RCRP MI_RCRP × × × Rotation Right with Carry
133 DRCR MI_DRCR × × × Rotation Right with Carry
134 DRCRP MI_DRCRP × × × Rotation Right with Carry
135 RCL MI_RCL × × × Rotation Left with Carry
136 RCLP MI_RCLP × × × Rotation Left with Carry
137 DRCL MI_DRCL × × × Rotation Left with Carry
138 DRCLP MI_DRCLP × × × Rotation Left with Carry
139 SFTL Refer to Appendix 2 1:N 1:N 1:N Bit Shift Left
Convert Solution
140 SFTLP Refer to Appendix 2 1:N 1:N 1:N Bit Shift Left
Convert Solution
141 SFTR Refer to Appendix 2 1:N 1:N 1:N Bit Shift Right
Convert Solution
7
142 SFTRP Refer to Appendix 2 1:N 1:N 1:N Bit Shift Right
Convert Solution
143 WSFR MI_WSFR × × × Word Shift Right
144 WSFRP MI_WSFRP × × × Word Shift Right
145 WSFL MI_WSFL × × × Word Shift Left
146 WSFLP MI_WSFLP × × × Word Shift Left
147 SFWR Refer to Appendix 2 1:N 1:N 1:N Shift write [FIFO/FILO
Convert Solution control]
148 SFWRP Refer to Appendix 2 1:N 1:N 1:N Shift write [FIFO/FILO
Convert Solution control]
149 SFRD Refer to Appendix 2 1:N 1:N 1:N Shift Read [FIFO Control]
Convert Solution
150 SFRDP Refer to Appendix 2 1:N 1:N 1:N Shift Read [FIFO Control]
Convert Solution
151 ZRST Refer to Appendix 2 1:N 1:N 1:N Zone Reset
Convert Solution
152 ZRSTP Refer to Appendix 2 1:N 1:N 1:N Zone Reset
Convert Solution
153 DECO Refer to Appendix 2 1:N 1:N 1:N Decode
Convert Solution
154 DECOP Refer to Appendix 2 1:N 1:N 1:N Decode
Convert Solution
155 ENCO Refer to Appendix 2 1:N 1:N 1:N Encode
Convert Solution
156 ENCOP Refer to Appendix 2 1:N 1:N 1:N Encode
Convert Solution
157 SUM MI_SUM × × × Sum of Active Bits
158 SUMP MI_SUMP × × × Sum of Active Bits
159 DSUM MI_DSUM × × × Sum of Active Bits
160 DSUMP MI_DSUMP × × × Sum of Active Bits
161 BON MI_BON × × × Check Specified Bit Stauts
162 BONP MI_BONP × × × Check Specified Bit Stauts
163 DBON MI_DBON × × × Check Specified Bit Stauts
164 DBONP MI_DBONP × × × Check Specified Bit Stauts
165 MEAN MI_MEAN × × × Mean
166 MEANP MI_MEANP × × × Mean
167 DMEAN MI_DMEAN × × × Mean
168 DMEANP MI_DEMEANP × × × Mean
169 ANS MI_ANS × × × (Timed)Annunciator Set
170 ANR MI_ANR × × × Annunciator Reset
171 ANRP MI_ANRP × × × Annunciator Reset
8
172 SQR MI_SQR × × × Square Root
173 SQRP MI_SQRP × × × Square Root
174 DSQR ROTB 1:1 1:1 × Square Root
175 DSQRP @ROTB 1:1 1:1 × Square Root
176 FLT FLT 1:1 1:1 1:1 Conversion to Floating
Point
177 FLTP @FLT 1:1 1:1 1:1 Conversion to Floating
Point
178 DFLT FLTL 1:1 1:1 1:1 Conversion to Floating
Point
179 DFLTP @FLTL 1:1 1:1 1:1 Conversion to Floating
Point
180 REF MI_REF × × × Refresh
181 REFP MI_REFP × × × Refresh
182 REFF MI_REFF × × × Refresh and filter adjust
183 REFFP MI_REFFP × × × Refresh and filter adjust
184 MTR MI_MTR × × × Input matrix
185 DHSCR MI_DHSCR × × × High speed cunter reset
186 DHSCS MI_DHSCS × × × High speed cunter set
187 DHSZ MI_DHSZ × × × High speed zone compare
188 SPD MI_SPD × × × Speed detection
189 DSPD MI_DSPD × × × Speed detection
190 PLSY MI_PLSY × × × Pulse Y output
191 DPLSY MI_DPLSY × × × Pulse Y output
192 PWM MI_PWM × × × Pulse width modulation
193 PLSR MI_PLSR × × × Ramp Pulse output
194 DPLSR MI_DPLSR × × × Ramp Pulse output
195 IST MI_IST × × × Initial State
196 SER MI_SER × × × Search
197 SERP MI_SERP × × × Search
198 DSER MI_DSER × × × Search
199 DSERP MI_DSERP × × × Search
200 ABSD MI_ABSD × × × Absolute Drum
201 DABSD MI_DABSD × × × Absolute Drum
202 INCD MI_INCD × × × Incremental Drum
203 TTMR MI_TTMR × × × Teaching Timer
204 STMR MI_STMR × × × Special Timer - Definable
205 ALT MI_ALT × × × Altermate State
206 ALTP MI_ALTP × × × Altermate State
207 RAMP MI_RAMP × × × Ramp-Variable Value
208 ROTC MI_ROTC × × × Rotart Table Control
9
209 SORT MI_SORT × × × Sort Data
210 TKY MI_TKY × × × Ten Key Input
211 DTKY MI_DTKY × × × Ten Key Input
212 HKY MI_HKY × × × Hexadecimal Input
213 DHKY MI_DHKY × × × Hexadecimal Input
214 DSW MI_DSW × × × Digital Switch
215 SEGD MI_SEGD × × × Seven Segment Decoder
216 SEGDP MI_SEGDP × × × Seven Segment Decoder
217 SEGL MI_SEGL × × × Seven Segment With
Latch
218 ARWS MI_ARWS × × × Arrow Switch
219 ASC MI_ASC × × × ASCII Code
220 PR MI_PR × × × Print' To A Display
221 FROM MI_FROM × × × Read From A Special
Function Block
222 FROMP MI_FROMP × × × Read From A Special
Function Block
223 DFROM MI_DFROM × × × Read From A Special
Function Block
224 DFROMP MI_DFROMP × × × Read From A Special
Function Block
225 TO MI_TO × × × Write To A Special
Function Block
226 TOP MI_TOP × × × Write To A Special
Function Block
227 DTO MI_DTO × × × Write To A Special
Function Block
228 DTOP MI_DTOP × × × Write To A Special
Function Block
229 RS MI_RS × × × RS Communications
230 PRUN MI_PRUN × × × Parallel run
231 PRUNP MI_PRUNP × × × Parallel run
232 DPRUN MI_DPRUN × × × Parallel run
233 DPRUNP MI_DPRUNP × × × Parallel run
234 ASCI MI_ASCI × × × HEX to ASCII
235 ASCIP MI_ASCIP × × × HEX to ASCII
236 HEX MI_HEX × × × ASCII to HEX
237 HEXP MI_HEXP × × × ASCII to HEX
238 CCD MI_CCD × × × Check Code
239 CCDP MI_CCDP × × × Check Code
240 VRRD MI_VRRD × × × Volume Read
10
241 VRRDP MI_VRRDP × × × Volume Read
242 VRSC MI_VRSC × × × Volume Scale
243 VRSCP MI_VRSCP × × × Volume Scale
244 RS2 MI_RS2 × × × Serial Communication 2
245 PID MI_PID × × × PID Control Loop
246 ANRD MI_ANRD × × × Analog Read
247 ANRDP MI_ANRDP × × × Analog Read
248 ANWR MI_ANWR × × × Analog Write
249 ANWRP MI_ANWRP × × × Analog Write
250 BLK MI_BLK × × × BLOCK
251 BLKP MI_BLKP × × × BLOCK
252 MCDE MI_MCDE × × × Machine Code
253 MCDEP MI_MCDEP × × × Machine Code
254 MNET MI_MNET × × × Mini Net
255 MNETP MI_MNETP × × × Mini Net
256 RMMN MI_RMMN × × × RM Monitor
257 RMMNP MI_RMMNP × × × RM Monitor
258 RMRD MI_RMRD × × × RM Read
259 RMRDP MI_RMRDP × × × RM Read
260 RMST MI_RMST × × × RM Start
261 RMWR MI_RMWR × × × RM Write
262 RMWRP MI_RMWRP × × × RM Write
263 ZPUSH MI_ZPUSH × × × Batch Store of Index
Register
264 ZPUSHP MI_ZPUSHP × × × Batch Store of Index
Register
265 ZPOP MI_ZPOP × × × Batch POP of Index
Register
266 ZPOPP MI_ZPOPP × × × Batch POP of Index
Register
267 DECMP MI_DECMP × × × Floating Point Compare
268 DECMPP MI_DECMPP × × × Floating Point Compare
269 DEZCP MI_DEZCP × × × Floating Point Zone
Compare
270 DEZCPP MI_DEZCPP × × × Floating Point Zone
Compare
271 DEMOV MOVL 1:1 1:1 1:1 Floating Point Move
272 DEMOVP @MOVL 1:1 1:1 1:1 Floating Point Move
273 DESTR MI_DESTR × × × Floating Point to
Character String
Conversion
11
274 DESTRP MI_DESTRP × × × Floating Point to
Character String
Conversion
275 DEVAL FVAL 1:1 1:1 1:1 Character String to
Floating Point Conversion
276 DEVALP @FVAL 1:1 1:1 1:1 Character String to
Floating Point Conversion
277 DEBCD MI_DEBCD × × × Floating Point to Scientific
278 DEBCDP MI_DEBCDP × × × Floating Point to Scientific
279 DEBIN MI_DEBIN × × × Scientific to Floating Point
280 DEBINP MI_DEBINP × × × Scientific to Floating Point
281 DEADD +F 1:1 1:1 1:1 Floating Point Add
282 DEADDP @+F 1:1 1:1 1:1 Floating Point Add
283 DESUB -F 1:1 1:1 1:1 Floating Point Subtract
284 DESUBP @-F 1:1 1:1 1:1 Floating Point Subtract
285 DEMUL *F 1:1 1:1 1:1 Floating Point
Multiplication
286 DEMULP @F 1:1 1:1 1:1 Floating Point
Multiplication
287 DEDIV /F 1:1 1:1 1:1 Floating Point Division
288 DEDIVP @/F 1:1 1:1 1:1 Floating Point Division
289 DEXP EXP 1:1 1:1 × Floating Point Exponent
290 DEXPP @EXP 1:1 1:1 × Floating Point Exponent
291 DLOGE LOG 1:1 1:1 × Floating Point Natural
Logarithm
292 DLOGEP @LOG 1:1 1:1 × Floating Point Natural
Logarithm
293 DLOG10 MI_DLOG10 × × × Floating Point Common
Logarithm
294 DLOG10P MI_DLOG10P × × × Floating Point Common
Logarithm
295 DESQR SQRT 1:1 1:1 × Floating Point Square
Root
296 DESQRP @SQRT 1:1 1:1 × Floating Point Square
Root
297 DENEG MI_DENEG × × × Floating Point Negation
298 DENEGP MI_DENEGP × × × Floating Point Negation
299 INT FIX 1:1 1:1 1:1 Floating Point to Integer
300 INTP @FIX 1:1 1:1 1:1 Floating Point to Integer
301 DINT FIXL 1:1 1:1 1:1 Floating Point to Integer
302 DINTP @FIXL 1:1 1:1 1:1 Floating Point to Integer
12
303 DSIN SIN 1:1 1:1 × Sine
304 DSINP @SIN 1:1 1:1 × Sine
305 DCOS COS 1:1 1:1 × Cosine
306 DCOSP @COS 1:1 1:1 × Cosine
307 DTAN TAN 1:1 1:1 × Tangent
308 DTANP @TAN 1:1 1:1 × Tangent
309 DASIN ASIN 1:1 1:1 × Floating Point Arc Sine
310 DASINP @ASIN 1:1 1:1 × Floating Point Arc Sine
311 DACOS ACOS 1:1 1:1 × Floating Point Arc Cosine
312 DACOSP @ACOS 1:1 1:1 × Floating Point Arc Cosine
313 DATAN ATAN 1:1 1:1 × Floating Point Arc Tangent
314 DATANP @ATAN 1:1 1:1 × Floating Point Arc Tangent
315 DRAD RAD 1:1 1:1 × Floating Point Degrees to
Radians Conversion
316 DRADP @RAD 1:1 1:1 × Floating Point Degrees to
Radians Conversion
317 DDEG DEG 1:1 1:1 × Floating Point Radians to
Degrees Conversion
318 DDEGP @DEG 1:1 1:1 × Floating Point Radians to
Degrees Conversion
319 WSUM MI_WSUM × × × Sum of Word Data
320 WSUMP MI_WSUMP × × × Sum of Word Data
321 DWSUM MI_DWSUM × × × Sum of Word Data
322 DWSUMP MI_DWSUMP × × × Sum of Word Data
323 WTOB MI_WTOB × × × WORD to BYTE
324 WTOBP MI_WTOBP × × × WORD to BYTE
325 BTOW MI_BTOW × × × BYTE to WORD
326 BTOWP MI_BTOWP × × × BYTE to WORD
327 UNI MI_UNI × × × 4-bit Linking of Word Data
328 UNIP MI_UNIP × × × 4-bit Linking of Word Data
329 DIS MI_DIS × × × 4-bit Grouping of Word
Data
330 DISP MI_DISP × × × 4-bit Grouping of Word
Data
331 SWAP SWAP 1:1 1:1 1:1 Float to Scientific
332 SWAPP @SWAP 1:1 1:1 1:1 Float to Scientific
333 DSWAP SWAP 1:1 1:1 1:1 Float to Scientific
334 DSWAPP @SWAP 1:1 1:1 1:1 Float to Scientific
335 SORT2 MI_SORT2 × × × Sort Tabulated Data 2
336 DSORT2 MI_DSORT2 × × × Sort Tabulated Data 2
337 DSZR MI_DSZR × × × DOG Search Zero Return
13
338 DVIT MI_DVIT × × × Interrupt Positioning
339 DDVIT MI_DDVIT × × × Interrupt Positioning
340 DTBL MI_DTBL × × × Batch Data Positioning
Mode
341 DABS MI_DABS × × × Absolute current value
read
342 ZRN MI_ZRN × × × Zero return
343 DZRN MI_DZRN × × × Zero return
344 PLSV MI_PLSV × × × Pulse V
345 DPLSV MI_DPLSV × × × Pulse V
346 DRVI MI_DRVI × × × Drive to increment
347 DDRVI MI_DDRVI × × × Drive to increment
348 DDRVA MI_DRVA × × × Drive to absolute
349 DRVA MI_DDRVA × × × Drive to absolute
350 TCMP MI_TCMP × × × Time Compare
351 TCMPP MI_TCMPP × × × Time Compare
352 TZCP MI_TZCP × × × Time Zone Compare
353 TZCPP MI_TZCPP × × × Time Zone Compare
354 TADD MI_TADD × × × Time Add
355 TADDP MI_TADDP × × × Time Add
356 TSUB MI_TSUB × × × Time Subtract
357 TSUBP MI_TSUBP × × × Time Subtract
358 HTOS MI_HTOS × × × Hour to second
conversion
359 HTOSP MI_HTOSP × × × Hour to second
conversion
360 DHTOS MI_DHTOS × × × Hour to second
conversion
361 DHTOSP MI_DHTOSP × × × Hour to second
conversion
362 STOH MI_STOH × × × Second to hour
conversion
363 STOHP MI_STOHP × × × Second to hour
conversion
364 DSTOH MI_DSTOH × × × Second to hour
conversion
365 DSTOHP MI_DSTOHP × × × Second to hour
conversion
366 TRD MI_TRD × × × Read RTC data
367 TRDP MI_TRDP × × × Read RTC data
368 TWR MI_TWR × × × Set RTC data
14
369 TWRP MI_TWRP × × × Set RTC data
370 DHOUR MI_DHOUR × × × Hour meter
371 HOUR MI_HOUR × × × Hour meter
372 GRY MI_GRY × × × Decimal to Gray Code
373 GRYP MI_GRYP × × × Decimal to Gray Code
374 DGRY MI_DGRY × × × Decimal to Gray Code
375 DGRYP MI_DGRYP × × × Decimal to Gray Code
376 GBIN MI_GBIN × × × Gray Code to Decimal
377 GBINP MI_GBINP × × × Gray Code to Decimal
378 DGBIN MI_DGBIN × × × Gray Code to Decimal
379 DGBINP MI_DGBINP × × × Gray Code to Decimal
380 RD3A MI_RD3A × × × Read form Dedicated
Analog Block
381 RD3AP MI_RD3AP × × × Read form Dedicated
Analog Block
382 WR3A MI_WR3A × × × Write to Dedicated Analog
Block
383 WR3AP MI_WR3AP × × × Write to Dedicated Analog
Block
384 EXTR MI_EXTR × × × External ROM Function
385 EXTRP MI_EXTRP × × × External ROM Function
386 DEXTR MI_DEXTR × × × External ROM Function
387 DEXTRP MI_DEXTRP × × × External ROM Function
388 COMRD MI_COMRD × × × Read Device Comment
Data
389 COMRDP MI_COMRDP × × × Read Device Comment
Data
390 RND MI_RND × × × Random Number
Generation
391 RNDP MI_RNDP × × × Random Number
Generation
392 DUTY MI_DUTY × × × Timing Pulse Generation
393 CRC MI_CRC × × × Cyclic Redundancy Check
394 CRCP MI_CRCP × × × Cyclic Redundancy Check
395 DHCMOV MI_DHCMOV × × × High Speed Counter Move
396 ADPRW MI_ADPRW × × × Adapter
397 BK+ MI_BK+ × × × Block Data Addition
398 BK+P MI_BK+P × × × Block Data Addition
399 DBK+ MI_DBK+ × × × Block Data Addition
400 DBK+P MI_DBK_+P × × × Block Data Addition
401 BK- MI_BK- × × × Block Data Subtraction
15
402 BK-P MI_BK-P × × × Block Data Subtraction
403 DBK- MI_DBK- × × × Block Data Subtraction
404 DBK-P MI_DBK-P × × × Block Data Subtraction
405 BKCMP= MI_BKCMP= × × × Block Data Compare
S1=S2
406 BKCMP=P MI_BKCMP=P × × × Block Data Compare
S1=S2
407 DBKCMP= MI_DBKCMP= × × × Block Data Compare
S1=S2
408 DBKCMP=P MI_DBKCMP=P × × × Block Data Compare
S1=S2
409 BKCMP> MI_BKCMP> × × × Block Data Compare
S1>S2
410 BKCMP>P MI_BKCMP>P × × × Block Data Compare
S1>S2
411 DBKCMP> MI_DBKCMP> × × × Block Data Compare
S1>S2
412 DBKCMP>P MI_DBKCMP>P × × × Block Data Compare
S1>S2
413 BKCMP< MI_BKCMP< × × × Block Data Compare
S1<S2
414 BKCMP<P MI_BKCMP<P × × × Block Data Compare
S1<S2
415 DBKCMP< MI_DBKCMP< × × × Block Data Compare
S1<S2
416 DBKCMP<P MI_DBKCMP<P × × × Block Data Compare
S1<S2
417 BKCMP<> MI_BKCMP<> × × × Block Data Compare
S1<>S2
418 BKCMP<>P MI_BKCMP<>P × × × Block Data Compare
S1<>S2
419 DBKCMP<> MI_DBKCMP<> × × × Block Data Compare
S1<>S2
420 DBKCMP<>P MI_DBKCMP<>P × × × Block Data Compare
S1<>S2
421 BKCMP<= MI_BKCMP<= × × × Block Data Compare
S1<=S2
422 BKCMP<=P MI_BKCMP<=P × × × Block Data Compare
S1<=S2
423 DBKCMP<= MI_DBKCMP<= × × × Block Data Compare
S1<=S2
16
424 DBKCMP<=P MI_DBKCMP<=P × × × Block Data Compare
S1<=S2
425 BKCMP>= MI_BKCMP>= × × × Block Data Compare
S1>=S2
426 BKCMP>=P MI_BKCMP>=P × × × Block Data Compare
S1>=S2
427 DBKCMP>= MI_DBKCMP>= × × × Block Data Compare
S1>=S2
428 DBKCMP>=P MI_DBKCMP>=P × × × Block Data Compare
S1>=S2
429 STR MI_STR × × × BIN to Character String
Conversion
430 STRP MI_STRP × × × BIN to Character String
Conversion
431 DSTR MI_DSTR × × × BIN to Character String
Conversion
432 DSTRP MI_DSTRP × × × BIN to Character String
Conversion
433 VAL MI_VAL × × × Character String to BIN
Conversion
434 VALP MI_VALP × × × Character String to BIN
Conversion
435 DVAL MI_DVAL × × × Character String to BIN
Conversion
436 DVALP MI_DVALP × × × Character String to BIN
Conversion
437 $+ +$ 1:1 1:1 × Link Character Strings
438 $+P @+$ 1:1 1:1 × Link Character Strings
439 LEN LEN$ 1:1 1:1 × Character String Length
Detection
440 LENP @LEN$ 1:1 1:1 × Character String Length
Detection
441 RIGHT RIGHT$ 1:1 1:1 × Extracting Character
String
Data from the Right
442 RIGHTP @RIGHT 1:1 1:1 × Extracting Character
String
Data from the Right
443 LEFT LEFT$ 1:1 1:1 × Extracting Character
String
Data from the Left
17
444 LEFTP @LEFT$ 1:1 1:1 × Extracting Character
String
Data from the Left
445 MIDR MI_MIDR × × × Random Selection of
Character
Strings
446 MIDRP MI_MIDRP × × × Random Selection of
Character
Strings
447 MIDW MI_MIDW × × × Random Replacement of
Character Strings
448 MIDWP MI_MIDWP × × × Random Replacement of
Character Strings
449 INSTR MI_INSTR × × × Character string search
450 INSTRP MI_INSTRP × × × Character string search
451 $MOV MOV$ 1:1 1:1 × Character String Transfer
452 $MOVP @MOVS 1:1 1:1 × Character String Transfer
453 FDEL SDEL 1:1 1:1 × Deleting Data from Tables
454 FDELP @SDEL 1:1 1:1 × Deleting Data from Tables
455 FINS SINS 1:1 1:1 × Inserting Data to Tables
456 FINSP @SINS 1:1 1:1 × Inserting Data to Tables
457 POP MI_POP × × × Shift Last Data Read
FILO Control]
458 POPP MI_POPP × × × Shift Last Data Read
FILO Control]
459 SFR NASR 1:1 1:1 1:1 Bit Shift Right with Carry
460 SFRP @NASR 1:1 1:1 1:1 Bit Shift Right with Carry
461 SFL NASL 1:1 1:1 1:1 Bit Shift Left with Carry
462 SFLP @NASL 1:1 1:1 1:1 Bit Shift Left with Carry
463 LD= LD=S 1:1 1:1 1:1 (S1)=(S2)
464 LDD= LD=SL 1:1 1:1 1:1 (S1)=(S2)
465 LD> LD>S 1:1 1:1 1:1 (S1)>(S1)
466 LD< LD>SL 1:1 1:1 1:1 (S1)<(S2)
467 LDD> LD<S 1:1 1:1 1:1 (S1)>(S1)
468 LDD< LD<SL 1:1 1:1 1:1 (S1)<(S2)
469 LD<> LD<>S 1:1 1:1 1:1 (S1)≠(S2)
470 LDD<> LD<>SL 1:1 1:1 1:1 (S1)≠(S2)
471 LD<= LD<=S 1:1 1:1 1:1 (S1)≦(S2)
472 LDD<= LD<=SL 1:1 1:1 1:1 (S1)≦(S2)
473 LD>= LD>=S 1:1 1:1 1:1 (S1)≧(S2)
474 LDD>= LD>=SL 1:1 1:1 1:1 (S1)≧(S2)
18
475 AND= AND=S 1:1 1:1 1:1 (S1)=(S2)
476 ANDD= AND=SL 1:1 1:1 1:1 (S1)=(S2)
477 AND> AND>S 1:1 1:1 1:1 (S1)>(S1)
478 ANDD> AND>SL 1:1 1:1 1:1 (S1)>(S1)
479 AND< AND<S 1:1 1:1 1:1 (S1)<(S2)
480 ANDD< AND<SL 1:1 1:1 1:1 (S1)<(S2)
481 AND<> AND<>S 1:1 1:1 1:1 (S1)≠(S2)
482 ANDD<> AND<>SL 1:1 1:1 1:1 (S1)≠(S2)
483 AND<= AND<=S 1:1 1:1 1:1 (S1)≦(S2)
484 ANDD<= AND<=SL 1:1 1:1 1:1 (S1)≦(S2)
485 AND>= AND>=S 1:1 1:1 1:1 (S1)≧(S2)
486 ANDD>= AND>=SL 1:1 1:1 1:1 (S1)≧(S2)
487 OR= OR=S 1:1 1:1 1:1 (S1)=(S2)
488 ORD= OR=SL 1:1 1:1 1:1 (S1)=(S2)
489 OR> OR>S 1:1 1:1 1:1 (S1)>(S1)
490 ORD> OR>SL 1:1 1:1 1:1 (S1)>(S1)
491 OR< OR<S 1:1 1:1 1:1 (S1)<(S2)
492 ORD< OR<SL 1:1 1:1 1:1 (S1)<(S2)
493 OR<> OR<>S 1:1 1:1 1:1 (S1)≠(S2)
494 ORD<> OR<>SL 1:1 1:1 1:1 (S1)≠(S2)
495 OR<= OR<=S 1:1 1:1 1:1 (S1)≦(S2)
496 ORD<= OR<=SL 1:1 1:1 1:1 (S1)≦(S2)
497 OR>= OR>=S 1:1 1:1 1:1 (S1)≧(S2)
498 ORD>= OR>=SL 1:1 1:1 1:1 (S1)≧(S2)
499 LIMIT MI_LIMIT × × × Limit Control
500 LIMITP MI_LIMITP × × × Limit Control
501 DLIMIT MI_DLIMIT × × × Limit Control
502 DLIMITP MI_DLIMITP × × × Limit Control
503 BAND MI_BAND × × × Dead Band Control
504 BANDP MI_BANDP × × × Dead Band Control
505 DBAND MI_DBAND × × × Dead Band Control
506 DBANDP MI_DBANDP × × × Dead Band Control
507 ZONE MI_ZONE × × × Zone Control
508 ZONEP MI_ZONEP × × × Zone Control
509 DZONE MI_DZONE × × × Zone Control
510 DZONEP MI_DZONEP × × × Zone Control
511 SCL MI_SCL × × × Scaling
(Coordinate by Point Data)
512 SCLP MI_SCLP × × × Scaling
19
513 DSCL MI_DSCL × × × Scaling
514 DSCLP MI_DSCLP × × × Scaling
515 DABIN MI_DABIN × × × Decimal ASCII to BIN
Conversion
516 DABINP MI_DABINP × × × Decimal ASCII to BIN
Conversion
517 DDABIN MI_DDABIN × × × Decimal ASCII to BIN
Conversion
518 DDABINP MI_DDABINP × × × Decimal ASCII to BIN
Conversion
519 BINDA MI_BINDA × × × BIN to Decimal ASCII
Conversion
520 BINDAP MI_BINDAP × × × BIN to Decimal ASCII
Conversion
521 DBINDA MI_DBINDA × × × BIN to Decimal ASCII
Conversion
522 DBINDAP MI_DBINDAP × × × BIN to Decimal ASCII
Conversion
523 SCL2 MI_SCL2 × × × Scaling 2
(Coordinate by X/Y Data)
524 SCL2P MI_SCL2P × × × Scaling 2
525 DSCL2 MI_DSCL2 × × × Scaling 2
526 DSCL2P MI_DSCL2P × × × Scaling 2
527 IVCK MI_IVCK × × × Inverter Status Check
528 IVDR MI_IVDR × × × Inverter Drive
529 IVRD MI_IVRD × × × Inverter Parameter Read
530 IVWR MI_IVWR × × × Inverter Parameter Write
531 IVBWR MI_IVBWR × × × Inverter Parameter Block
Write
532 RBFM MI_RBFM × × × Divided BFM Read
533 WBFM MI_WBFM × × × Divided BFM Write
534 DHSCT MI_DHSCT × × × High Speed Counter
Compare
With Data Table
535 LOADR MI_LOADR × × × Load From ER
536 LOADRP MI_LOADRP × × × Load From ER
20
537 SAVER MI_SAVER × × × Save to ER
538 INITR MI_INITR × × × Initialize R and ER
539 INITRP MI_INITRP × × × Initialize R and ER
540 LOGR MI_LOGR × × × Logging R and ER
541 LOGRP MI_LOGRP × × × Logging R and ER
542 RWER MI_RWER × × × Rewrite to ER
543 RWERP MI_RWERP × × × Rewrite to ER
544 INITER MI_INITER × × × Initialize ER
545 INITERP MI_INITERP × × × Initialize ER
21
Appendix 2: Mitsubishi Instruction Convert Solution 1: N
OUT instruction
Operand type is C（Count instruction）
From: Mitsubishi ladder
To: Omron ladder
RST instruction
Operand type are T、C
To: Omron ladder
RST instruction
Operand type are D、Z、V
To: Omron ladder
22
CJ instruction
Operand type are PZ、PV
To: Omron ladder (CP1E)
To: Omron ladder (CP1H/CP1L)
CJP instruction
Operand type is P
To: Omron ladder
23
CJP instruction
Operand type are PZ、PV
FOR instruction
Operand type are K、H、T、C、D、V、Z
To: Omron ladder
FOR instruction
Operand type are DZ、DV
24
FOR instruction
Operand type are KX、KY、KM、KS
To: Omron ladder
CMP instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z
To: Omron ladder
25
CMP instruction
Operand 1 type and Operand 2 type are KX、KY、KM、KS
To: Omron ladder
26
CMP instruction
Operand 1 type and Operand 2 type are DZ、DV
27
CMPP instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z
To: Omron ladder
28
CMPP instruction
To: Omron ladder
29
CMPP instruction
30
DCMP instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、Z
To: Omron ladder
31
DCMP instruction
To: Omron ladder
32
DCMP instruction
Operand 1 type and Operand 2 type are DZ
33
DCMPP instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、Z
To: Omron ladder
34
DCMPP instruction
To: Omron ladder
35
DCMPP instruction
36
ZCP instruction
Operand 1 type , Operand 2 type and Operand 3 type are K、H、T、C、D、Z
37
38
ZCP instruction
Operand 1 type , Operand 2 type and Operand 3 type are KX、KY、KM、KS
To: Omron ladder
39
ZCP instruction
Operand 1 type , Operand 2 type and Operand 3 type are DZ、DV
40
41
ZCPP instruction
To: Omron ladder
42
ZCPP instruction
To: Omron ladder
43
ZCPP instruction
Operand 1 type , Operand 2 type and Operand 3 type are DZ、DV
44
45
DZCP instruction
To: Omron ladder
46
DZCP instruction
To: Omron ladder
47
DZCP instruction
Operand 1 type , Operand 2 type and Operand 3 type are DZ
48
49
DZCPP instruction
To: Omron ladder
50
DZCPP instruction
To: Omron ladder
51
DZCPP instruction
Operand 1 type , Operand 2 type and Operand 3 type are DZ
52
MOV instruction
Operand 1 type are K、H、T、C、D、V、Z，Operand 2 are T、C、D、V、Z
To: Omron ladder
53
MOV instruction
MOV instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are KY、KM、KS
To: Omron ladder
MOVP instruction
Operand 1 type are K、H、T、C、D、V、Z，Operand 2 type are T、C、D、V、Z
To: Omron ladder
54
MOVP instruction
MOVP instruction
To: Omron ladder
DMOV instruction
To: Omron ladder
55
DMOV instruction
DMOV instruction
To: Omron ladder
DMOVP instruction
To: Omron ladder
56
DMOVP instruction
DMOVP instruction
To: Omron ladder
BMOV instruction
Operand 1 type and Operand 2 type are T、C、D，Operand 3 type are K、H、D
To: Omron ladder
57
BMOV instruction
Operand 1 type and Operand 2 type are DZ、DV, Operand 3 type are K、H、D
BMOV instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are KY、KM、KS,Operand 3 type are
K、H
To: Omron ladder
BMOV instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are T、C、D,Operand 3 type are K、
H
To: Omron ladder
58
BMOV instruction
Operand 1 type are T、C、D，Operand 2 type are KX、KY、KM、KS,Operand 3 type are K、
H
To: Omron ladder
BMOVP instruction
Operand 1 type and Operand 2 type are T、C、D，Operand 3 type are K、H、D
To: Omron ladder
BMOVP instruction
Operand 1 type and Operand 2 type are DZ、DV, Operand 3 type are K、H、D
59
BMOVP instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are KY、KM、KS, Operand 3 type are
K、H
To: Omron ladder
BMOVP instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are T、C、D, Operand 3 type are K、
H
To: Omron ladder
BMOVP instruction
Operand 1 type are T、C、D，Operand 2 type are KX、KY、KM、KS, Operand 3 type are K、
H
To: Omron ladder
BMOVP instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are KY、KM、KS,Operand 3 type are
K、H
To: Omron ladder
60
BMOVP instruction
Operand 1 type are KX、KY、KM、KS，Operand 2 type are T、C、D,Operand 3 type are K、
H
To: Omron ladder
BMOVP instruction
Operand 1 type are T、C、D，Operand 2 type are KX、KY、KM、KS,Operand 3 type are K、
H
To: Omron ladder
BCD instruction
Operand 1 type and Operand 2 type are T、C、D、V、Z
To: Omron ladder
61
BCD instruction
BCD instruction
Operand 1 type are KX、KY、KM、KS, Operand 2 type are KY、KM、KS
To: Omron ladder
BCDP instruction
To: Omron ladder
62
BCDP instruction
BCDP instruction
To: Omron ladder
DBCD instruction
To: Omron ladder
63
DBCD instruction
To: Omron ladder (CP1L/1H)
DBCD instruction
To: Omron ladder
DBCDP instruction
To: Omron ladder
64
DBCDP instruction
DBCDP instruction
To: Omron ladder
BIN instruction
To: Omron ladder
65
BIN instruction
BIN instruction
To: Omron ladder
BINP instruction
To: Omron ladder
66
BINP instruction
To: Omron ladder (CP1L/CP1H)
BINP instruction
To: Omron ladder
DBIN instruction
To: Omron ladder
67
DBIN instruction
DBIN instruction
To: Omron ladder
DBINP instruction
To: Omron ladder
68
DBINP instruction
DBINP instruction
To: Omron ladder
ADD instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z, Operand 3 type are T、C、
D、V、Z
To: Omron ladder
69
ADD instruction
Operand 1 type and Operand 2 type are KX、KY、KM、KS, Operand 3 type are KY、KM、KS
To: Omron ladder
ADD instruction
Operand 1 type 、Operand 2 type and Operand 3 type are DZ、DV
70
ADDP instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z,Operand 3 type are T、C、D、
V、Z
To: Omron ladder
ADDP instruction
To: Omron ladder
71
ADDP instruction
DADD instruction
V、Z
To: Omron ladder
72
DADD instruction
To: Omron ladder
DADD instruction
Operand 1 type 、Operand 2 type and Operand 3 type are DZ
To: Omron ladder
DADDP instruction
V、Z
To: Omron ladder
73
DADDP instruction
To: Omron ladder
DADDP instruction
74
SUB instruction
V、Z
To: Omron ladder
SUB instruction
To: Omron ladder
75
SUB instruction
SUBP instruction
V、Z
To: Omron ladder
76
SUBP instruction
To: Omron ladder
77
SUBP instruction
DSUB instruction
V、Z
To: Omron ladder
78
DSUB instruction
To: Omron ladder
79
DSUB instruction
DSUBP instruction
V、Z
To: Omron ladder
80
DSUBP instruction
To: Omron ladder
DSUBP instruction
81
MUL instruction
V、Z
To: Omron ladder
MUL instruction
To: Omron ladder
82
MUL instruction
MULP instruction
V、Z
To: Omron ladder
83
MULPinstruction
To: Omron ladder
MULP instruction
84
DMUL instruction
V、Z
To: Omron ladder
DMUL instruction
To: Omron ladder
85
DMUL instruction
DMULP instruction
V、Z
To: Omron ladder
86
DMULP instruction
To: Omron ladder
87
DMULP instruction
DIV instruction
V、Z
To: Omron ladder
88
DIV instruction
To: Omron ladder
DIV instruction
89
DIVP instruction
V、Z
To: Omron ladder
DIVP instruction
To: Omron ladder
90
DIVP instruction
DDIV instruction: Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z,Operand 3 type
are T、C、D、V、Z
To: Omron ladder
91
DDIV instruction
To: Omron ladder
92
DDIV instruction
DDIVP instruction
V、Z
To: Omron ladder
93
DDIVP instruction
To: Omron ladder
94
DDIVP instruction
INC instruction
Operand 1 type are T、C、D、V、Z
To: Omron ladder
INC instruction
Operand 1 type are DV、DZ
95
INC instruction
Operand 1 type are KY、KM、KS
To: Omron ladder
INCP instruction
To: Omron ladder
INCP instruction
96
INCP instruction
To: Omron ladder
DINC instruction
To: Omron ladder
DINC instruction
Operand 1 type is DZ
97
DINC instruction
To: Omron ladder
DINCP instruction
To: Omron ladder
98
DINCP instruction
Operand 1 type is DZ
DINCP instruction
To: Omron ladder
DEC instruction
To: Omron ladder
99
DEC instruction
DEC instruction
To: Omron ladder
DECP instruction
To: Omron ladder
100
DECP instruction
DECP instruction
To: Omron ladder
DDEC instruction
To: Omron ladder
101
DDEC instruction
Operand 1 type are DZ
DDEC instruction
To: Omron ladder
DDECP instruction
To: Omron ladder
102
DDECP instruction
Operand 1 type are DZ
DDECP instruction
To: Omron ladder
WAND instruction
Operand 1 type and Operand 2 type are K、H、T、C、D、V、Z，Operand 3 type are T、C、
D、V、Z
To: Omron ladder
103
WAND instruction
Operand 1 type and Operand 2 type are KX、KY、KM、KS，Operand 3 type are KY、KM、
KS
To: Omron ladder
WAND instruction
Operand 1 type ,Operand 2 type and Operand 3 tyep are DZ、DV
104
WANDP instruction
D、V、Z
To: Omron ladder
WANDP instruction
KS
To: Omron ladder
105
WANDP instruction
Operand 1 type ,Operand 2 type and Operand 3 tyep are DZ、DV
DAND instruction
D、V、Z
To: Omron ladder
106
DANDinstruction
KS
To: Omron ladder
107
DAND instruction
Operand 1 type ,Operand 2 type and Operand 3 tyep are DZ
DANDPinstruction
D、V、Z
To: Omron ladder
108
DANDP instruction
KS
To: Omron ladder
DANDP instruction
Operand 1 type, Operand 2 type and Operand 3 tyep are DZ
109
WOR instruction
D、V、Z
To: Omron ladder
WOR instruction
KS
To: Omron ladder
110
WOR instruction
Operand 1 type ,Operand 2 type and Operand 3 type are DZ、DV
WORP instruction
D、V、Z
To: Omron ladder
111
WORP instruction
KS
To: Omron ladder
WORP instruction
112
DOR instruction
D、V、Z
To: Omron ladder
DOR instruction
KS
To: Omron ladder
113
DOR instruction
Operand 1 type, Operand 2 type and Operand 3 type are DZ
DORP instruction
D、V、Z
To: Omron ladder
114
DORP instruction
KS
To: Omron ladder
DORP instruction
Operand 1 type, Operand 2 type and Operand 3 type are DZ
115
WXOR instruction
D、V、Z
To: Omron ladder
WXOR instruction
KS
To: Omron ladder
116
WXOR instruction
WXORP instruction
D、V、Z
To: Omron ladder
117
WXORP instruction
KS
To: Omron ladder
WXORP instruction
118
DXOR instruction
D、V、Z
To: Omron ladder
DXOR instruction
KS
To: Omron ladder
119
DXOR instruction
Operand 1 type ,Operand 2 type and Operand 3 type are DZ
DXORP instruction
D、V、Z
To: Omron ladder
120
DXORP instruction
KS
To: Omron ladder
DXORP instruction
Operand 1 type ,Operand 2 type and Operand 3 type are DZ
121
SFTR instruction
To: Omron ladder
SFTRP instruction
To: Omron ladder
SFTL instruction
To: Omron ladder
SFTLP instruction
To: Omron ladder
122
SFWR instruction
Operand 1 type are K、H、T、C、D、V、Z
123
SFWR instruction
Operand 1 type are KX、KY、KM、KS
124
SFWR instruction
Operand 1 type are DZ、DV
125
SFWRP instruction
Operand 1 type are K、H、T、C、D、V、Z
126
SFWRP instruction
Operand 1 type are KX、KY、KM、KS
127
SFWRP instruction
128
SFRD instruction
To: Omron ladder
129
SFRD instruction
130
SFRDP instruction
To: Omron ladder
131
SFRDP instruction
132
ZRST instruction
Operand 1 type and Operand 2 type are C、T、D
To: Omron ladder
ZRST instruction
Operand 1 type and Operand 2 type are Y、M、S
To: Omron ladder
ZRST instruction
133
ZRSTP instruction
Operand 1 type and Operand 2 type are C、T、D
To: Omron ladder
ZRSTP instruction
Operand 1 type and Operand 2 type are Y、M、S
To: Omron ladder
ZRSTP instruction
134
DECO instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type areT、C、D
To: Omron ladder
DECO instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type are Y、M、S
To:
Omron ladder
135
DECO instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type are DZ、DV
DECO instruction
Operand 1 type are K、H; Operand 2 type are T、C、D
To: Omron ladder
DECO instruction
Operand 1 type are K、H; Operand 2 type are Y、M、S
To: Omron ladder
136
DECO instruction
Operand 1 type are K、H: Operand 2 type are DZ、DV
DECO instruction
Operand 1 type are DZ、DV; Operand 2 type are T、C、D
137
DECO instruction
Operand 1 type are DZ、DV; Operand 2 type are Y、M、S
138
DECO instruction
Operand 1 type are DZ、DV; Operand 2 type are DZ、DV
DECOP instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type are T、C、D
To: Omron ladder
139
DECOP instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type are Y、M、S
140
DECOP instruction
Operand 1 type are T、C、D、V、Z、X、Y、M、S; Operand 2 type are DZ、DV
141
DECOP instruction
Operand 1 type are K、H; Operand 2 type are T、C、D
To: Omron ladder
DECOP instruction
Operand 1 type are K、H; Operand 2 type are Y、M、S
To: Omron ladder
DECOP instruction
Operand 1 type are K、H; Operand 2 type are DZ、DV
142
DECOP instruction
Operand 1 type are DZ、DV; Operand 2 type are T、C、D
143
DECOP instruction
Operand 1 type are DZ、DV; Operand 2 type are Y、M、S
144
DECOP instruction
ENCO instruction
Operand 1 type are T、C、D、V、Z; Operand 2 type are T、C、D、V、Z
To: Omron ladder
145
ENCO instruction
ENCOP instruction
Operand 1 type are T、C、D、V、Z; Operand 2 type are T、C、D、V、Z
To: Omron ladder
146
ENCOPinstruction
Operand 1 type are DZ、DV 第二操作数类型为 DZ、DV
147
Appendix 3: Mitsubishi I/O Memory Convert Table
1. FX1 series I/O memory Convert Table
(1) I/O memory Convert Table (FX1S to CP1E-E□□D□-□/CP1E-N□□D□-□)
FX1S CP1E-E□□D□-□/CP1E-N□□D□-□
Area Start Final Area Area Start Final Bit width
Bit/CH Bit/CH number Bit/CH Bit/CH
X Input X000 X17 Octal - Input Area 0.00 0.15 16bit
Y Output Y000 Y15 Octal - Output Area 100 100.13 16bit
M Auxiliary M0 M383 Decimal W Work Area W0.00 W23.15 16bit
relay M384 M511 Decimal H Holding Area H8.00 H15.15 16bit
T Timer T0 T62 Decimal T Timer T0 T62 -
T63 - Decimal - - Can not
convert
C Counter C0 C31 Decimal C Counter C0 C31 -
C235 C255 Decimal - - Can not
convert
D Data D0 D255 Decimal D Data Register D0 D255 -
Register D8000 D8255 Decimal - - Can not
convert
V Index Z0 V0 Decimal W Work Area W24 W25 -
,Z Register Z1 V1 Decimal W26 W27 -
Z2 V2 Decimal W28 W29 -
S State relays S0 S127 Decimal H Holding Area H0.00 H7.15 16bit
WorkArea TEMP_BIT 200.00 200.07 -
(Don't use this area when you add ladder.) TEMP_CH W40 W47 -
TEMP_DW W40 W47 -
148
(2) I/O memory Convert Table(FX1N to CP1E-E□□D□-□)
FX1N CP1E-E□□D□-□
Y Output Y000 Y177 Octal - Output Area 100.00 107.15 16bit
M512 M1055 Decimal H16.00 H49.15 16bit
M1056 M1535 Decimal - - Can not
convert
T246 T249 Decimal - - Can not
convert
T250 T255 Decimal T250 T255 -
convert
D Data D0 D127 Decimal D Data D0 D127 -
Register D128 D2047 Decimal Register D128 D2047 -
D2048 D7999 Decimal - - Can not
convert
convert
S128 S999 Decimal - - Can not
convert
TEMP_DW W40 W47 -
149
(3) I/O memory Convert Table(FX1N to CP1E-N□□D□-□)
FX1N CP1E-N□□D□-□
M512 M1055 Decimal H16.00 H49.15 16bit
convert
convert
T250 T255 Decimal T250 T255 -
convert
D Data Register D0 D127 Decimal D Data Register D0 D127 -
D128 D7999 Decimal D128 D7999 -
convert
S128 S999 Decimal - - Can not
convert
TEMP_DW W40 W47 -
150
(4) I/O memory Convert Table(FX1N to CP1H/CP1L)
FX1N CP1H/CP1L
relay M384 M511 Decimal H Holding H0.00 H71.15 16bit
M512 M1055 Decimal Area - - Can not
change
change
change
T250 T255 Decimal T250 T255 -
change
Register D128 D7999 Decimal Register D128 D7999 -
change
V Index Z0 V0 Decimal DR Data DR0 DR1 -
,Z Register Z1 V1 Decimal Register DR2 DR3 -
Z2 V2 Decimal DR4 DR5 -
S State S0 S991 Decimal H Holding H72.00 H133.15 16bit
relays S992 S999 Decimal Area H134.00 H134.07 16bit
(Don’t use this area when you add ladder.) TEMP_CH W24 W31 -
TEMP_DW W24 W31 -
TEMP_IR IR8 IR15
TEMP_DR DR8 DR15
151
(5) I/O memory Convert Table(FX1S to CP1H/CP1L)
FX1S CP1H/CP1L
change
change
C235 C255 Decimal C235 C255 -
D Data D0 D127 Decimal D Data Register D0 D127 -
Register D128 D255 Decimal D128 D255 -
change
V Index Z0 V0 Decimal DR Data Register DR0 DR1 -
,Z Register Z1 V1 Decimal DR2 DR3 -
S State S0 S127 Decimal H Holding Area H8.00 H15.15 16bit
relays
(Don’t use this area when you add ladder.) TEMP_CH W24 W31 -
TEMP_DW W24 W31 -
TEMP_IR IR8 IR15
TEMP_DR DR8 DR15
152
(6) Auxiliary Relay Convert Table (Fx1 to CP1H/CP1L/CP1E)
FX1S CP1H/CP1L/CP1E
Name Relay Name Relay number
number
RUN monitor NO contact M8000 Always ON Flag P_On(CF113)
RUN monitor NC contact M8001 Always OFF Flag P_Off(CF114)
Initial pulse NO contact M8002 First Cycle Flag A200.11
Battery voltage Low M8005 Battery Error Flag A402.04
Battery error latch M8006 Battery Error Flag A402.04
100 msec clock pulse M8012 0.1 s Clock Pulse P_0_1s(CF100)
1 sec clock pulse M8013 1 s Clock Pulse P_1s(CF102)
1 min clock pulse M8014 1 min Clock Pulse P_1s(CF104)
Zero M8020 Equals Flag P_EQ(CF6)
Borrow M8021 Underflow Flag P_UF(CF10)
Carry M8022 Overflow Flag P_OF(CF9)
Memory hold in ‘stop’ mode M8033 IOM Hold Bit A500.12
All outputs disable M8034 Output OFF Bit A500.15
153
(1) I/O memory Convert Table (FX2 to CP1E-N□□D□-□)
FX2 CP1E-N□□D□-□
Area Start Final Area number Area Start Final Bit width
Bit/CH Bit/CH Bit/CH Bit/CH
relay M1600 M3071 Decimal - - Can not
change
change
T250 T255 Decimal T250 T255 -
change
Register D8192 D8255 Decimal Register - - Can not
change
V Index Z0 V0 Decimal H Holding Area H0 H1 -
,Z Register Z1 V1 Decimal H2 H3 -
Z2 V2 Decimal H4 H5 -
S State relays S0 S991 Decimal CH I/O Area 116.00 177.15 16bit
S992 S999 Decimal 178.00 178.07 16bit
(Don’t use this area when you add ladder.) TEMP_CH 33 40 -
TEMP_DW 33 40 -
154
(2) I/O memory Convert Table (FX2 to CP1E-E□□D□-□)
FX2 CP1E-E□□D□-□
Area Start Final Area number Area Start Final Bit width
Bit/CH Bit/CH Bit/CH Bit/CH
change
change
T250 T255 Decimal T250 T255 -
change
D Data D0 D2047 Decimal D Work Area D0 D2047 -
change
S State S0 S991 Decimal H Holding Area 116.00 177.15 16bit
relays S992 S999 Decimal 178.00 178.07 16bit
TEMP_DW 33 40 -
155
(3) I/O memory Convert Table (FX2 to CP1H/CP1L)
FX2 CP1H/CP1L
relay
change
T250 T255 Decimal T250 T255 -
change
Register Register
S State S0 S991 Decimal Work Area 3800.00 3861.15 16bit
TEMP_DW 33 40 -
TEMP_IR IR8 IR15
TEMP_DR DR8 DR15
156
(4) Auxiliary Relay Convert Table (FX2 to CP1E)
FX2 CP1E-E□□D□-□/ CP1E-N□□D□-□
Name Area number Name Area number
Initial pulse NC contact M8003 First Cycle Flag A200.11
Carry M8022 Flow Flag P_OF(CF4)
(5) Auxiliary Relay Convert Table (FX2 to CP1H/CP1L)

FX2 CP1H/CP1L
Name Area number Name Area number
Error Happen M8004 Work Area W480.04
Flags M8007~M8012 Work Area W480.07~W480.12
157
(1) I/O memory Convert Table (FX3 to CP1E-N□□D□-□)
FX3 CP1E-N□□D□-□
change
change
T250 T255 Decimal T250 T255 -
change
Register D8192 D8255 Decimal Register - - Can not
change
V Index Z0 V0 Decimal H Work Area H0 H1 -
S State relays S0 S991 Decimal CH I/O Area 116.00 177.15 16bit
S992 S999 Decimal 178.00 178.07 16bit
TEMP_DW 33 40 -
158
(2) I/O memory Convert Table (FX3 to CP1E-E□□D□-□)
FX3 CP1E-E□□D□-□
change
change
T250 T255 Decimal T250 T255 -
change
D Data D0 D2047 Decimal D Work Area D0 D2047 -
change
S State S0 S991 Decimal H Holding Area 116.00 177.15 16bit
（Don’t use this area when you add ladder.） TEMP_CH 33 40 -
TEMP_DW 33 40 -
159
(3) I/O memory Convert Table (FX3 to CP1H/CP1L)
FX3 CP1H/CP1L
relay
change
T250 T255 Decimal T250 T255 -
change
Register Register
S State S0 S991 Decimal Work Area 3800.00 3861.15 16bit
（Don’t use this area when you add ladder.） TEMP_CH 33 40 -
TEMP_DW 33 40 -
TEMP_IR IR8 IR15
TEMP_DR DR8 DR15
160
(4) Auxiliary Relay Convert Table (FX3 to CP1E)
FX3 CP1E-E□□D□-□/ CP1E -N□□D□-□
Name Areanumber Name Areanumber
(5) Auxiliary Relay Convert Table (Fx3 to CP1H/CP1L)

FX3 CP1H/CP1L
Name Areanumber Name Areanumber
Error Happen M8004 Work Area W480.04
161
Operation Manual - Appendix
Siemens Convert Specification
Rev 1.10
CONTENTS
Appendix 1: Siemens Instruction Convert List....................................................3

Appendix 2: Siemens instruction Convert Solution 1: N ......................................11
SR ..................................................................................................................11
LDB= ..............................................................................................................12
LDB< ..............................................................................................................13
LDB> ..............................................................................................................14
LDB<> ............................................................................................................15
LDB<= ............................................................................................................16
LDB>= ............................................................................................................17
AB= ................................................................................................................18
AB< ................................................................................................................19
AB> ................................................................................................................20
AB<> ..............................................................................................................21
AB<= ..............................................................................................................22
AB>= ..............................................................................................................23
TONR .............................................................................................................23
CTU ................................................................................................................24
BLKMOV_D ....................................................................................................24
SHR_W ...........................................................................................................25
SHL_W ...........................................................................................................26
SHR_DW ........................................................................................................27
SHL_DW .........................................................................................................28
ROR_W ..........................................................................................................29
ROL_W ...........................................................................................................30
ROR_DW ........................................................................................................31
ROL_DW ........................................................................................................32
BCD_I .............................................................................................................33
I_BCD .............................................................................................................33
ROUND ..........................................................................................................34
I_DI ................................................................................................................34
R_S ................................................................................................................35
FOR................................................................................................................36
Appendix 3: Siemens I/O Memory Convert Table ...............................................37
2
Appendix 1: Siemens Instruction Convert List
Convert Solution: 1: 1: Convert Solution 1: 1
1: N: Convert Solution 1: N
×: No Convert Solution
Source Instruction Destination CP CP CP
No Function
(S7-200) Instruction 1H 1L 1E
1 AENO P_ER 1:1 1:1 1:1 And ENO
2 LD LD 1:1 1:1 1:1 Load
3 LDN LD NOT 1:1 1:1 1:1 Load Not
4 A AND 1:1 1:1 1:1 And
5 AN AND NOT 1:1 1:1 1:1 And Not
6 O OR 1:1 1:1 1:1 Or

7 ON OR NOT 1:1 1:1 1:1 Or Not
8 LDI !LD 1:1 1:1 1:1 Load immediate

9 LDNI !LD NOT 1:1 1:1 1:1 Load Not immediate
10 AI !AND 1:1 1:1 1:1 And immediate

11 ANI !AND NOT 1:1 1:1 1:1 And Not immediate
12 OI !OR 1:1 1:1 1:1 Or immediate

13 ONI !OR NOT 1:1 1:1 1:1 Or Not immediate
14 ALD AND LD 1:1 1:1 1:1 And Block
15 OLD OR LD 1:1 1:1 1:1 Or Block
16 NOT NOT 1:1 1:1 1:1 Not
17 EU UP 1:1 1:1 1:1 Pulse
18 ED DOWN 1:1 1:1 1:1 Falling Pulse

19 = OUT 1:1 1:1 1:1 Set
20 =I !OUT 1:1 1:1 1:1 Set immediate

21 S SETA 1:1 1:1 1:1 Set Zone
22 R RSTA 1:1 1:1 1:1 Reset Zone

23 SI SI_SI × × × Set Zone immediate
24 RI SI_RI × × × Reset Zone immediate
Refer to Appendix 2
25 SR Set Register
Convert Solution 1:N 1:N 1:N
26 RS SI_RS × × × Reset Register
27 NOP SI_NOP × × × Nop
Refer to Appendix 2
28 LDB= Compare Load Byte N1=N2
Refer to Appendix 2
29 LDB< Compare Load Byte N1<N2
Refer to Appendix 2
30 LDB> Compare Load Byte N1>N2
Refer to Appendix 2
31 LDB<> Compare Load Byte N1<>N2
3
No Function
Refer to Appendix 2
32 LDB<= Compare Load Byte N1<=N2
Refer to Appendix 2
33 LDB>= Compare Load Byte N1>=N2
34 LDW= LD=S 1:1 1:1 1:1 Compare Load Word N1=N2
35 LDW< LD<S 1:1 1:1 1:1 Compare Load Word N1<N2

36 LDW> LD>S 1:1 1:1 1:1 Compare Load Word N1>N2
37 LDW<> LD<> 1:1 1:1 1:1 Compare Load Word N1<>N2
38 LDW<= LD<=S 1:1 1:1 1:1 Compare Load Word N1<=N2

39 LDW>= LD>=S 1:1 1:1 1:1 Compare Load Word N1>=N2
40 LDD= LD=SL 1:1 1:1 1:1 Compare Load Double Word N1=N2
41 LDD< LD<SL 1:1 1:1 1:1 Compare Load Double Word N1<N2
42 LDD> LD>SL 1:1 1:1 1:1 Compare Load Double Word N1>N2
43 LDD<> LD<>SL 1:1 1:1 1:1 Compare Load Double Word N1<>N2
44 LDD<= LD<=SL 1:1 1:1 1:1 Compare Load Double Word N1<=N2
45 LDD>= LD>=SL 1:1 1:1 1:1 Compare Load Double Word N1>=N2
46 LDR= LD=F 1:1 1:1 1:1 Compare Load Real N1=N2
47 LDR< LD<F 1:1 1:1 1:1 Compare Load Real N1<N2

48 LDR> LD>F 1:1 1:1 1:1 Compare Load Real N1>N2
49 LDR<> LD<>F 1:1 1:1 1:1 Compare Load Real N1<>N2

50 LDR<= LD<=F 1:1 1:1 1:1 Compare Load Real N1<=N2
51 LDR>= LD<>F 1:1 1:1 1:1 Compare Load Real N1>=N2

Refer to Appendix 2
52 AB= Compare And Byte N1=N2
Refer to Appendix 2
53 AB< Compare And Byte N1<N2
Refer to Appendix 2
54 AB> Compare And Byte N1>N2
Refer to Appendix 2
55 AB<> Compare And Byte N1<>N2
Refer to Appendix 2
56 AB<= Compare And Byte N1<=N2
Refer to Appendix 2
57 AB>= Compare And Byte N1>=N2
58 AW= AND=S 1:1 1:1 1:1 Compare And Word N1=N2
59 AW< AND<S 1:1 1:1 1:1 Compare And Word N1<N2
60 AW> AND>S 1:1 1:1 1:1 Compare And Word N1>N2

61 AW<> AND<>S 1:1 1:1 1:1 Compare And Word N1<>N2
62 AW<= AND<=S 1:1 1:1 1:1 Compare And Word N1<=N2
63 AW>= AND>=S 1:1 1:1 1:1 Compare And Word N1=>N2
64 AD= AND=SL 1:1 1:1 1:1 Compare And Double Word N1=N2
4
No Function
65 AD< AND<SL 1:1 1:1 1:1 Compare And Double Word N1<N2
66 AD> AND>SL 1:1 1:1 1:1 Compare And Double Word N1>N2
67 AD<> AND<>SL 1:1 1:1 1:1 Compare And Double Word N1<>N2
68 AD<= AND<=SL 1:1 1:1 1:1 Compare And Double Word N1<=N2
69 AD>= AND>=SL 1:1 1:1 1:1 Compare And Double Word N1>=N2
70 AR= AND=F 1:1 1:1 1:1 Compare And Real N1=N2
71 AR< AND<F 1:1 1:1 1:1 Compare And Real N1<N2

72 AR> AND>F 1:1 1:1 1:1 Compare And Real N1>N2
73 AR<> AND<> 1:1 1:1 1:1 Compare And Real N1<>N2
74 AR<= AND<=F 1:1 1:1 1:1 Compare And Real N1<=N2
75 AR>= AND>=F 1:1 1:1 1:1 Compare And Real N1>=N2
76 OB= SI_OB= × × × Compare Or Byte N1=N2

77 OB< SI_OB< × × × Compare Or Byte N1<N2
78 OB> SI_OB> × × × Compare Or Byte N1>N2

79 OB<> SI_OB<> × × × Compare Or Byte N1<>N2
80 OB<= SI_OB<= × × × Compare Or Byte N1<=N2

81 OB>= SI_OB>= × × × Compare Or Byte N1>=N2
82 OW= OR=S 1:1 1:1 1:1 Compare Or Word N1=N2

83 OW< OR<S 1:1 1:1 1:1 Compare Or Word N1<N2
84 OW> OR>S 1:1 1:1 1:1 Compare Or Word N1>N2
85 OW<> OR<>S 1:1 1:1 1:1 Compare Or Word N1<>N2
86 OW<= OR<=S 1:1 1:1 1:1 Compare Or Word N1<=N2
87 OW>= OR>=S 1:1 1:1 1:1 Compare Or Word N1=>N2

88 OD= OR=SL 1:1 1:1 1:1 Compare Or Double Word N1=N2
89 OD< OR<SL 1:1 1:1 1:1 Compare Or Double Word N1<N2
90 OD> OR>SL 1:1 1:1 1:1 Compare Or Double Word N1>N2
91 OD<> OR<>SL 1:1 1:1 1:1 Compare Or Double Word N1<>N2
92 OD<= OR<=SL 1:1 1:1 1:1 Compare Or Double Word N1<=N2

93 OD>= OB>=SL 1:1 1:1 1:1 Compare Or Double Word N1>=N2
94 OR= OR=F 1:1 1:1 1:1 Compare Or Real N1=N2

95 OR< OR<F 1:1 1:1 1:1 Compare Or Real N1<N2
96 OR> OR>F 1:1 1:1 1:1 Compare Or Real N1>N2

97 OR<> OR<>F 1:1 1:1 1:1 Compare Or Real N1<>N2
98 OR<= OR<=F 1:1 1:1 1:1 Compare Or Real N1<=N2

99 OR>= OR>=F 1:1 1:1 1:1 Compare Or Real N1>=N2
100 LDS= SI_LDS= 1:1 1:1 × Compare Load String IN1=IN2
101 LDS<> SI_LDS<> 1:1 1:1 × Compare Load String IN1<>IN2

102 AS= SI_AS= 1:1 1:1 × Compare And String IN1=IN2
103 AS<> SI_AS<> 1:1 1:1 × Compare And String IN1<>IN2
104 OS= SI_OS= 1:1 1:1 × Compare Or String IN1=IN2

105 OS<> SI_OS<> 1:1 1:1 × Compare Or String IN1<>IN2
5
No Function
106 TON TIM,TIMH,TMHH 1:1 1:1 1:1 On-Delay Timer
Refer to Appendix 2
107 TONR Retentive On-Delay Timer
108 TOF SI_TOF × × × Off-Delay Timer
109 TP SI_TP × × × Pulse Timer
110 BGN_ITIME SI_BGN_ITIME × × × Beginning Interval Time

111 CAL_ITIME SI_CAL_ITIME × × × Calculate Interval Time
Refer to Appendix 2
112 CTU CU increments the current value
CU increments the current value CD
113 CTUD CNTR 1:1 1:1 1:1 decrements the current value
114 CTD CNT 1:1 1:1 1:1 CD decrements the current value
115 ADD_I + 1:1 1:1 1:1 Add Integer IN1+OUT=OUT

116 SUB_I - 1:1 1:1 1:1 Subtract Integer IN1-OUT=OUT
117 ADD_DI +L 1:1 1:1 1:1 Add double Integer IN1+OUT=OUT

118 SUB_DI -L 1:1 1:1 1:1 Subtract Integer IN1-OUT=OUT
119 MUL_I * 1:1 1:1 1:1 Multiply Integer IN1*OUT=OUT

120 DIV_I / 1:1 1:1 1:1 Divide Integer IN1/OUT=OUT
121 MUL_DI *L 1:1 1:1 1:1 Multiply Double Integer IN1*OUT=OUT

122 DIV_DI /L 1:1 1:1 1:1 Divide Double Integer IN1/OUT=OUT
123 MUL * 1:1 1:1 1:1 Multiply Integer to Double Integer（16*16-〉32）
124 DIV / 1:1 1:1 1:1 Divide Integer（16/16-〉32）
125 INCB ++ 1:1 1:1 1:1 Bit Increment
126 DECB -- 1:1 1:1 1:1 Bit Decrement
127 INCW ++ 1:1 1:1 1:1 Word Increment

128 DECW -- 1:1 1:1 1:1 Word Decrement
129 INCD ++L 1:1 1:1 1:1 Double Word Increment

130 DECD --L 1:1 1:1 1:1 Double Word Decrement
131 ADD_R +F 1:1 1:1 1:1 Add Real IN1+OUT=OUT

132 SUB_R -F 1:1 1:1 1:1 Subtract Real IN1-OUT=OUT
133 MUL_R *F 1:1 1:1 1:1 Multiply Real IN1*OUT=OUT
134 DIV_R /F 1:1 1:1 1:1 Divide Real IN1/OUT=OUT

135 SQRT SQRT 1:1 1:1 × Square Root
136 LN LOG 1:1 1:1 × Natural Logarithm
137 EXP EXP 1:1 1:1 × Natural Exponential

138 SIN SIN 1:1 1:1 × Sine
139 COS COS 1:1 1:1 × Cosine

140 TAN TAN 1:1 1:1 × Tangent
141 PID SI_PID × × × PID Loop
142 MOV_B MOVD 1:1 1:1 1:1 Move Byte
143 MOV_W MOV 1:1 1:1 1:1 Move Word
144 MOV_DW MOVL 1:1 1:1 1:1 Move Double Word
6
No Function
145 MOV_R MOVL 1:1 1:1 1:1 Move Real
146 BLKMOV_B SI_BLKMOV_B × × × Block Move Byte

147 BLKMOV_W XFER 1:1 1:1 1:1 Block Move Word
Refer to Appendix 2
148 BLKMOV_D Block Move Double Word
149 SWAP SWAP 1:1 1:1 1:1 Swap Bytes
150 MOV_BIR SI_MOV_BIR × × × Move Byte Immediate Read
151 MOV_BIW SI_MOV_BIW × × × Move Byte Immediate Write
152 WAND_B ANDW 1:1 1:1 1:1 And Byte

153 WOR_B ORW 1:1 1:1 1:1 Or Byte
154 WXOR_B XORW 1:1 1:1 1:1 Exclusive Or Byte

155 WAND_W ANDW 1:1 1:1 1:1 And Word
156 WOR_W ORW 1:1 1:1 1:1 Or Word
157 WXOR_W XORW 1:1 1:1 1:1 Exclusive Or Word

158 WAND_DW ANDL 1:1 1:1 1:1 And Double Word
159 WOR_DW ORWL 1:1 1:1 1:1 Or Double Word
160 WXOR_DW XORL 1:1 1:1 1:1 Exclusive Or Double Word

161 INV_B COM 1:1 1:1 1:1 Invert Byte
162 INV_W COM 1:1 1:1 1:1 Invert Word

163 INV_DW COML 1:1 1:1 1:1 Invert Double Word
164 SHR_B SI_ SHR_B × × × Shift Right Byte
165 SHL_B SI_ SHL_B × × × Shift Left Byte

Refer to Appendix 2
166 SHR_W Shift Right Word
Refer to Appendix 2
167 SHL_W Shift Left Word
Refer to Appendix 2
168 SHR_DW Shift Right Double Word
Refer to Appendix 2
169 SHL_DW Shift Left Double Word
170 ROR_B SI_ROR_B × × × Rotate Right Byte
171 ROL_B SI_ROL_B × × × Rotate Left Byte
Refer to Appendix 2
172 ROR_W Rotate Right Word
Refer to Appendix 2
173 ROL_W Rotate Left Word
Refer to Appendix 2
174 ROR_DW Rotate Right Double Word
Refer to Appendix 2
175 ROL_DW Rotate Left Double Word
176 SHRB SI_ SHRB × × × Shift and Rotate Register
7
No Function
Refer to Appendix 2
177 BCD_I BCD to integer
Refer to Appendix 2
178 I_BCD Integer to BCD
179 DI_R(DTR) FLTL 1:1 1:1 1:1 Double Integer to Real
Refer to Appendix 2
180 ROUND Round
181 TRUNC FIXL 1:1 1:1 1:1 Truncate
182 DI_I SI_ DI_I × × × Double Integer to Integer

Refer to Appendix 2
183 I_DI Integer to Double Integer
184 B_I SI_ B_I × × × Byte to Integer
185 I_B SI_ I_B × × × Integer to byte
186 DECO MLPX 1:1 1:1 1:1 Decode
187 ENCO DMPX 1:1 1:1 1:1 Encode
188 SEG SDEC 1:1 1:1 1:1 Segment

189 ATH SI_ATH × × × ASCll to Hexadecimal
190 HTA SI_HTA × × × Hexadecimal to ASCll
191 ITA SI_ITA × × × Integer to ASCll
192 DTA SI_DTA × × × Double Integer to ASCll
193 RTA SI_RTA × × × Real to ASCll
194 I_S SI_I_S × × × Integer to String

195 DI_S SI_DI_S × × × Double Integer to String
Refer to Appendix 2
196 R_S Real to String
197 S_I SI_S_I × × × String to Integer
198 S_DI SI_S_DI × × × String to Double Integer

199 S_R SI_STR × × × String to Real
200 JMP CJP 1:1 1:1 1:1 Jump to Label
201 LBL JME 1:1 1:1 1:1 Label
202 SBR SBN 1:1 1:1 1:1 Subroutine Start

203 CRET SI_CRET × × × Conditional Return from Subroutine
Refer to Appendix 2
204 FOR For/Next Loop
205 NEXT NEXT 1:1 1:1 1:1 For/Next Loop
206 SCR STEP 1:1 1:1 1:1 Load SCR
207 SCRT SNXT 1:1 1:1 1:1 SCR Transition

208 CSCRE SI_CSCRE × × × Conditional SCR End
209 SCRE SI_SCRE × × × SCR End
210 CALL SBS 1:1 1:1 1:1 Call Subroutine
8
No Function
Refer to FOR/NEXT loop number (Included in FOR
211 FINAL
FOR Instruction 1:1 1:1 1:1 when converted)
212 END SI_END × × × END

213 DIAG_LED SI_DIAG_LED × × × Diagnostic LED
214 STOP SI_STOP × × × Stop
215 WDR SI_WDR × × × Watchdog Reset（300ms）

216 LPS OUT TR0 1:1 1:1 1:1 Logic Push
217 LRD LD TR0 1:1 1:1 1:1 Logic Read
218 LPP LD TR0 1:1 1:1 1:1 Logic Pop

219 LDS SI_LDS × × × Load Stack
220 HDEF SI_HDEF × × × High-Speed Counter Definition

221 HSC SI_HSC × × × High-Speed Counter
222 PLS SI_PLS × × × Pulse Output
223 READ_RTC SI_READ_RTC × × × Read-Time Clock

224 SET_RTC SI_SET_RTC × × × Set Read-Time Clock
225 READ_RTCX SI_READ_RTCX × × × Read Real Time Clock Extended
226 SET_RTCX SI_SET_RTCX × × × Set Real Time Clock Extended

227 ATT SI_ATT × × × Add to Table
228 FND= SI_FND= × × × Table Find

229 FND<> SI_FND<> × × × Table Find
230 FND< SI_FND< × × × Table Find
231 FND> SI_FND> × × × Table Find
232 FIFO SI_FIFO × × × First-In-First-Out
233 LIFO SI_LIFO × × × Last-In-First-Out
234 FILL SI_FILL × × × Memory Fill

235 ATCH SI_ATCH × × × Attach Interrupt
236 DTCH SI_DTCH × × × Detach Interrupt

237 CRETI SI_CRETI × × × Conditional Return from Interrupt
238 ENI SI_ENI × × × Enable Interrupt

239 DISI SI_DISI × × × Disable Interrupt
240 CEVNT SI_CEVNT × × × Clear Interrupt Event
241 NETR SI_NETR × × × Network Read

242 NETW SI_NETW × × × Network Write
243 XMT SI_XMT × × × Transmit
244 RCV SI_RCV × × × Receive
245 GET_ADDR SI_GET_ADDR × × × Get Port Address

246 SET_ADDR SI_SET_ADDR × × × Set Port Address
247 STR_LEN LEN$ 1:1 1:1 × String Length
248 STR_CPY MOV$ 1:1 1:1 × Copy String
249 STR_CAT +$ 1:1 1:1 × Concatenate String
250 SSTR_CPY MID$ 1:1 1:1 × Copy Substring from String
9
No Function
251 STR_FIND FINDS 1:1 1:1 × Find String Within String
252 CHR_FIND SI_CHR_FIND × × × Find First Character Within String
10
Appendix 2: Siemens instruction Convert Solution 1: N
SIEMENS S7-200(Ladder) Class Detail

Instruction
SR Bit Logic Instructions Set Dominant Bistable
From: Siemens ladder
To: Omron ladder
11
Instruction
LDB= Compare Instructions Compare Load Byte N1=N2
To: Omron ladder
12
Instruction
LDB< Compare Instructions Compare Load Byte N1<N2
To: Omron ladder
13
Instruction
LDB> Compare Instructions Compare Load Byte N1>N2
To: Omron ladder
14
Instruction
LDB<> Compare Load Byte
Compare Instructions
N1<>N2
To: Omron ladder
15
Instruction
LDB<= Compare Load Byte
N1<=N2
To: Omron ladder
16
Instruction
LDB>= Compare Load Byte
N1>=N2
To: Omron ladder
17
Instruction
AB= Compare Instructions Compare And Byte N1=N2
To: Omron ladder
18
Instruction
AB< Compare Instructions Compare And Byte N1<N2
To: Omron ladder
19
Instruction
AB> Compare Instructions Compare And Byte N1>N2
To: Omron ladder
20
Instruction
AB<> Compare Instructions Compare And Byte N1<>N2
To: Omron ladder
21
Instruction
AB<= Compare Instructions Compare And Byte N1<=N2
To: Omron ladder
22
Instruction
AB>= Compare Instructions Compare And Byte N1>=N2
To: Omron ladder

Instruction
TONR Timer Instructions Retentive On-Delay Timer
To: Omron ladder
23
Instruction
CTU Counter Instructions CU increments the current
value
To: Omron ladder

Instruction
BLKMOV_D Move Instructions Block Move Double Word
To: Omron ladder
24
Instruction
SHR_W Shift and Rotate Instructions Shift Right Word
To: Omron ladder
25
Instruction
SHL_W Shift and Rotate Instructions Shift Left Word
To: Omron ladder
26
Instruction
SHR_DW Shift and Rotate Instructions Shift Right Double Word
To: Omron ladder
27
Instruction
SHL_DW Shift and Rotate Instructions Shift Left Double Word
To: Omron ladder
28
Instruction
ROR_W Shift and Rotate Instructions Rotate Right Word
To: Omron ladder
29
Instruction
ROL_W Shift and Rotate Instructions Rotate Left Word
To: Omron ladder
30
Instruction
ROR_DW Shift and Rotate Instructions Rotate Right Double Word
To: Omron ladder
31
Instruction
ROL_DW Shift and Rotate Instructions Rotate Left Double Word
To: Omron ladder
32
Instruction
BCD_I Conversion Instructions BCD to Integer
To: Omron ladder

Instruction
I_BCD Conversion Instructions Integer to BCD
To: Omron ladder
33
Instruction
ROUND Conversion Instructions Real to Double Word(Round)
To: Omron ladder

Instruction
I_DI Conversion Instructions Integer to Double Integer
To: Omron ladder
34
Instruction
R_S Conversion Instructions Real to String
To: Omron ladder
35
Instruction
FOR Program Control For/Next Loop
Instructions
Form: Siemens ladder
To: Omron ladder
36
Appendix 3: Siemens I/O Memory Convert Table
(1) I/O memory Convert Table (S7-200 to CP1E-E)
S7-200 CP1E-E□□D□-□
Area Start Final Bit Area Start Final Bit width
Bit/CH Bit/CH width Bit/CH Bit/CH
I Input register I0.0 I15.7 1bit - Input Area 0.00 15.07 1bit
IB0 IB15 8bit 0 15 8bit
IW0 IW14 16bit 0 14 16bit
ID0 ID12 32bit 0 12 32bit
Q Output register Q0.0 Q15.7 1bit - Output Area 100 115.07 1bit
QB0 QB15 8bit 100 115 8bit
QW0 QW14 16bit 100 114 16bit
QD0 QD12 32bit 100 112 32bit
V Variable V0.0 V2047.7 1bit D Data Register - - Can not convert
memory V2048.0 V10239.7 1bit - - Can not convert
VB0 VB2047 8bit D0 D2047 8bit
VB2048 VB10239 8bit - - Can not convert
VW0 VW2046 16bit D0 D2046 16bit
VW2048 VW10238 16bit - - Can not convert
VD0 VD2044 32bit D0 D2044 32bit
VD2048 VD10236 32bit - - Can not convert
M Bit memory M0.0 M31.7 1bit W Work Area W0.0 W31.7 1bit
MB0 MB31 8bit W0 W31 8bit
MW0 MW30 16bit W0 W30 16bit
MD0 MD28 32bit W0 W28 32bit
T Timer T0 - - T Timer T0 - -
T1 T31 - T4 T34 -
T32 - - T1 - -
T33 T63 - T35 T65 -
T64 - - T2 - -
T65 T95 - T66 T96 -
T96 - - T3 - -
T97 T255 - T97 T255 -
C Counter C0 C255 - C Counter C0 C255 -
L Local memory L0.0 L24.07 1bit Holding Area 264.0 288.07 1bit
L25.0 L63.7 1bit /CIO Area H0.0 H38.07 1bit
LB0 LB24 8bit 264 288 8bit
LB25 LB63 8bit H0 H38 8bit
LW0 LW24 16bit 264 288 16bit
LW25 LW62 16bit H0 H37 16bit
LD0 LD23 32bit 264 287 32bit
LD24 LD60 32bit H0 H36 32bit
S Sequential S0.0 S31.7 1bit W Work Area W32.00 W63.07 1bit
control relay SB0 SB31 8bit W32 W63 8bit
SW0 SW30 16bit W32 W62 16bit
SD0 SD28 32bit W32 W60 32bit
AIW Analog input AIW0 AIW62 16bit - Input Area 16 78 16bit
AQW Analog output AQW0 AQW62 16bit - Output Area 116 178 16bit
AC Accumulator AC0 AC3 8bit - - - - Can not convert
register
HC High-Speed HC0 HC5 16bit - - - - Can not convert
counter
WorkArea TEMP_BIT H48.00 H48.07 -
(Don't use this area when you add ladder.) TEMP_CH H40 H47 -
TEMP_DW H40 H47 -
37
(2) I/O memory Convert Table (S7-200 to CP1E-N)
S7-200 CP1E-N□□D□-□
I Input register I0.0 I15.7 1bit - Input Area 0.00 15.07 1bit
IB0 IB15 8bit 0 15 8bit
Q Output Q0.0 Q15.7 1bit - Output Area 100 115.07 1bit
register QB0 QB15 8bit 100 115 8bit
QW0 QW14 16bit 100 114 16bit
QD0 QD12 32bit 100 112 32bit
VB8192 VB10239 8bit - - Can not convert
VW0 VW8191 16bit D0 D8191 16bit
VW8192 VW10238 16bit - - Can not convert
VD0 VD8190 32bit D0 D8190 32bit
VD8191 VD10236 32bit - - Can not convert
T1 T31 - T4 T34 -
T32 - - T1 - -
T33 T63 - T35 T65 -
T64 - - T2 - -
T65 T95 - T66 T96 -
T96 - - T3 - -
T97 T255 - T97 T255 -
L Local L0.0 L24.07 1bit Holding Area 264.0 288.07 1bit
memory L25.0 L63.7 1bit /CIO Area H0.0 H38.07 1bit
LB0 LB24 8bit 264 288 8bit
LB25 LB63 8bit H0 H38 8bit
LW0 LW24 16bit 264 288 16bit
LW25 LW62 16bit H0 H37 16bit
LD0 LD23 32bit 264 287 32bit
LD24 LD60 32bit H0 H36 32bit
AQW Analog AQW0 AQW62 16bit - Output Area 116 178 16bit
output
register
counter
TEMP_DW H40 H47 -
38
(3) I/O memory Convert Table (S7-200 to CP1L-L, L10)
S7-200 CP1L-L, L10
I Input I0.0 I15.7 1bit - Input Area 0.00 15.07 1bit
register IB0 IB15 8bit 0 15 8bit
Q Output Q0.0 Q15.7 1bit - Output Area 100.00 115.07 1bit
QW0 QW14 16bit 100 114 16bit
QD0 QD12 32bit 100 112 32bit
VB10000 VB10239 8bit D32400 D32639 8bit
VW0 VW9999 16bit D0 D9999 16bit
VW10000 VW10238 16bit 32400 32638 16bit
VD0 VD9998 32bit D0 D9998 32bit
VD9999 - 32bit - - Can not convert
VD10000 VD10236 32bit D10000 D32636 32bit
T1 T31 - T4 T34 -
T32 - - T1 - -
T33 T63 - T35 T65 -
T64 - - T2 - -
T65 T95 - T66 T96 -
T96 - - T3 - -
T97 T255 - T97 T255 -
L Local L0.0 L63.7 1bit CIO Area 264.00 327.07 1bit
memory LB0 LB63 8bit 264 327 8bit
LW0 LW62 16bit 264 326 16bit
LD0 LD60 32bit 264 324 32bit
output
register
counter
TEMP_DW H40 H47 -
39
(4) I/O memory Convert Table (S7-200 to CP1L-M, CP1H)
S7-200 CP1L-M,CP1H
I Input I0.0 I15.7 1bit - Input Area 0.00 15.07 1bit
register IB0 IB15 8bit 0 15 8bit
Q Output Q0.0 Q15.7 1bit - Output Area 100.00 115.07 1bit
QW0 QW14 16bit 100 114 16bit
QD0 QD12 32bit 100 112 32bit
9
VW0 VW10238 16bit D0 D1023 16bit
8
VD0 VD10236 32bit D0 D1023 32bit
6
7
T1 T31 - T4 T34 -
T32 - - T1 - -
T33 T63 - T35 T65 -
T64 - - T2 - -
T65 T95 - T66 T96 -
T96 - - T3 - -
T97 T255 - T97 T255 -
L Local L0.0 L63.7 1bit CIO Area 264.00 327.07 1bit
memory LB0 LB63 8bit 264 327 8bit
LW0 LW62 16bit 264 326 16bit
LD0 LD60 32bit 264 324 32bit
control relay 7
SB0 SB31 8bit W32 W63 8bit
output
register
counter
TEMP_DW H40 H47 -
40
(5) Special Memory bit Convert Table (S7-200 to CP1)
S7-200 CP1
Name Relay number Name Relay number
Always ON SM0.0 Always ON Flag P_On(CF113)
First Scan SM0.1 First Cycle Flag A200.11
Power up SM0.3 First Cycle Flag A200.11
30 s off / 30 s on SM0.4 1 min Clock Pulse P_1min(CF104)
0.5 s off / 0.5 s on SM0.5 1 s Clock Pulse P_1s(CF102)
Zero SM1.0 Equals Flag P_EQ(CF6)
Negative SM1.2 Negative Flag P_NE(CF8)

Ladder Program Converter

Uploaded by

Copyright:

Available Formats

Ladder Program Converter

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ladder Program Converter

Uploaded by

Copyright:

Available Formats

Ladder Program Converter

1. About Ladder Program Converter...........................................................8

Read and Understand this Manual

3. SUITABILITY FOR USE

Indicates an imminently hazardous situation which,

Indicates a potentially hazardous situation which,

Precautions for Safe Use

Precautions for Correct Use

The circle and slash symbol indicates operations that

The filled circle symbol indicates operations that you

The triangle symbol indicates precautions (including

This tool is just used to convert the instructions of Mitsubishi and

The I/O memory convert specification is made before instruction

1. About Ladder Program Converter

2.2. Object PLC Series

3. Installation and uninstall

4. Notice about the conversion

4.2. Conversion Limition

OB Series can not be

(2) About Mitsubishi Instructions:

EI/DI function is changed The Mitsubishi PLC default disable interrupts,

(1) Open the source program in GX-Developer.

Fig.5-1 Mitsubishi GX-Developer

(2) Click , enter the mnemonic list window.

Fig.5-2 Mitsubishi instruction list View

(3) Select the Program needed to be converted and copy it.

Fig.5-3 OMRON CX-Programmer View

(5) Right-click NewPLC, click properties

Fig. 5-4 Change properties box

(6) Choose Execute Timer/Counter as Binary

Fig. 5-5 Choose Execute Timer/Counter as Binary box

Fig. 5-6 Ladder Conversion Dialogue box

Fig. 5-7 Conversion list file saving dialogue box

Fig. 5-8 Converting progress bar

(10)The converted program will be displayed in the CX-Programmer.

Fig.5-9 the result of conservation

Fig. 5-10 insert the temporary variable

5.2. Copy Program from STEP 7 MicroWIN of Siemens

(1) Open the program needed to be converted by STEP 7 MicroWIN of Siemens.

Fig.5-11 STEP 7 MicroWIN of Siemens

(2) Convert Siemens SIMATIC to International Symbol

Fig.5-12 “Options” Screen of Siemens

Fig.5-13 “General” Screen of Siemens

Fig. 5-14 Siemens Instruction （Mnemonic） list View

(4) Select the program needed to be converted.

(5) Start up CX-Programmer and create a new project.

Fig. 5-15 OMRON CX-Programmer

Fig. 5-16 Ladder Conversion Dialogue box

Fig.5-17 conversion list file selection Dialogue box

Fig. 5-18 Converting Progress Bar

Fig. 5-19 the result of conversion

Fig. 5-20 Insert temporary variable

5.3. Conversion List File

(1) Conversion List File specification

(2) Open the CSV File in Excel

(3) Conversion Example

6. ERROR List and Solutions

Choose the “Generated a

If the converter destination