Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Hose 1

    Uploaded by

    ramalingam6874
    This document provides specifications for two hydraulic hoses. Hose 1 is 5/8" diameter and 650mm long with R12 fittings rated for 350 bar pressure, located from the pump to the core block on machine PIMD-03. Hose 2 is 5/8" diameter and 1100mm long with R12 fittings rated for 390 bar pressure, located from the pump to the core block on machine PIMD-17, with no bends required. Both hoses use tapered pipe ferrule fittings and swivel nuts.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Hose 1

    Uploaded by

    ramalingam6874
    12 views6 pages
    This document provides specifications for two hydraulic hoses. Hose 1 is 5/8" diameter and 650mm long with R12 fittings rated for 350 bar pressure, located from the pump to the core block on machine PIMD-03. Hose 2 is 5/8" diameter and 1100mm long with R12 fittings rated for 390 bar pressure, located from the pump to the core block on machine PIMD-17, with no bends required. Both hoses use tapered pipe ferrule fittings and swivel nuts.

    Original Description:

    Original Title

    hose1

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for two hydraulic hoses. Hose 1 is 5/8" diameter and 650mm long with R12 fittings rated for 350 bar pressure, located from the pump to the core block on machine PIMD-03. Hose 2 is 5/8" diameter and 1100mm long with R12 fittings rated for 390 bar pressure, located from the pump to the core block on machine PIMD-17, with no bends required. Both hoses use tapered pipe ferrule fittings and swivel nuts.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    12 views6 pages

    Hose 1

    Uploaded by

    ramalingam6874
    This document provides specifications for two hydraulic hoses. Hose 1 is 5/8" diameter and 650mm long with R12 fittings rated for 350 bar pressure, located from the pump to the core block on machine PIMD-03. Hose 2 is 5/8" diameter and 1100mm long with R12 fittings rated for 390 bar pressure, located from the pump to the core block on machine PIMD-17, with no bends required. Both hoses use tapered pipe ferrule fittings and swivel nuts.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 6

    HYDRAULIC HOSE REQUIREMENT DATA SHEET.

    H155-5 Bi 8-SN-BSP
    1 2 3 4 5 6 7 8
    SAP HOSE Length Required Data on Hose Pressure Tolarnce for Machine Location

    CODE Size End to End fitting R1/R12/4SH/4SP Bar/PSI Length on m/c

    PUMP
    PIMD-03 DELIVERY
    5/8". 650MM R12 350BAR 10MM
    M/C TO CORE
    BLOCK.

    PR.NO. 12126507 DATE:9.8.23


    5/8*650 MM/ST/ST/metric/390 BAR/SN
    TAPER PIPE FERRULE OD;20MM ID;15MM
    SWIVEL NUT ID:28 MM PITCH: 2mm
    9 10 11 12 13 14 15 16
    Pipe Used for Fitting Flange Flange Swivel Thread Thread Type
    Taper FERRULE PIPE OD

    Pressure/Drain OD Thickness Nut ID TPI or mm Metric/(JIC/BSP) at Mouth

    End A NA NA 28MM 2mm Metric 20MM

    PRESSURE LINE

    End B NA NA 28MM 2mm Metric 20MM


    17 18 19 20
    Bend ReqED. Drop PHOTO OF FITTING REMARK

    0/45/90 Deg Length

    STRAIGHT SWIVEL NUT

    STRAIGHT SWIVEL NUT


    H-156-5 Bi 8 SN-BSP.
    HYDRAULIC HOSE REQUIREMENT DATA SHEET.
    1 2 3 4 5 6 7 8 9
    SAP HOSELength Required
    Data on HosePressure Tolarnce for Machine Location Pipe Used for

    CODE SizeEnd to End R1/R12/4SH/4SP


    fitting Bar/PSI Length on m/c Pressure/Drain

    PUMP
    PIMD- DELIVERY
    5/8". 1100MM R12 350BAR 10MM PRESSURE LINE
    17M/C TO CORE
    BLOCK.

    PR NO;12135768 DATE:29.8.23
    5/8*1100MM MM/ST/ST/390 BAR/swivel nut
    TAPER PIPE FERRULE ID:12.5MM
    SWIVEL NUT ID:27.5 MM PITCH:2mm
    10 11 12 13 14 15 16
    Fitting Flange Flange Swivel Thread Thread Type Taper OD

    OD Thickness Nut ID TPI or mm Metric/(JIC/BSP)


    Taper ferrulePipe OD at Mouth

    End A NA NA 27.5MM 2mm Metric 21MM

    End B NA NA 27.5MM 2mm Metric 21MM


    17 18 19 20
    Bend ReqED. Drop PHOTO OF FITTING REMARK

    0/45/90 Deg Length

    STRAIGHT SWIIEL NUT

    45 SWIIEL NUT

    You might also like