Chevron Base Oil

CHEVRON NEUTRAL OIL
60R, 100R, 150R, 220R, 600R
PRODUCT DESCRIPTION Chevron Neutral Oil 100R is a 5 cSt Group II "plus"

base stock with a typical viscosity index of 116-119. It
Chevron Neutral Oils are all-hydroprocessed, Group II/ was designed to meet the strict volatility requirements
II+ paraffinic base oils that can be used in blending in of modern engine oils while maintaining API Group II
a variety of lubricant and process oils. status to simplify qualification programs and to provide
interchangeability of Chevron base stocks with other
CUSTOMER BENEFITS approved stocks. Chevron 100R enables blenders to
minimize the amount of more expensive Group III oils
Chevron Neutral Oils deliver value through: needed for the most stringent 10W-XX, 5W-XX and
• High viscosity index 0W-XX motor oil requirements. Chevron 100R was
upgraded to match the specifications of Chevron
• Good volatility 110RLV, which has been sunset.
• Exceptional oxidation stability
Chevron Neutral Oil 60R is a light viscosity oil that is
• Compatibility with a wide array of additives typically used in light industrial oil applications,
for formulating flexibility electrical insulating oils, as well as other specialty
lubricants and process oils.
FEATURES Chevron Neutral Oils are non-toxic and meet U.S.
Chevron Neutral Oils are all-hydroprocessed, highly Food and Drug Administration (FDA)
refined API Group II/II+ paraffinic base stocks. Their requirement 21 CFR 178.3620(c) for components of
extremely low sulfur, nitrogen, and aromatic content nonfood articles.
give them excellent thermal and oxidation stability.
These base oils provide excellent cold flow performance APPLICATIONS
because the ISODEWAXING® catalyst and technology
convert almost all of the wax in the feed into very When combined with properly selected additives,
stable, branched isoparaffins. Chevron Neutral Oils are ideal for blending a wide
variety of finished products, including:
Chevron Neutral Oils offer the following characteristics
relative to typical Group I (solvent refined) base • Passenger car motor oils
stocks: • Heavy duty motor oils
• Lower volatility and cold cranking simulator (CCS) • Industrial engine oils
viscosity to meet modern engine oil specifications • Tractor hydraulic fluids
• Better oxidation and thermal stability • Transmission fluids
• Lower aromatics, sulfur and nitrogen • Gear oils
• Improved response to pour point depressants • Greases
• Improved soot dispersancy in heavy duty motor oil • Hydraulic oils
formulations • Ammonia refrigeration oils
Chevron Neutral Oils 150R, 220R, and 600R are API • Paper machine oils
Group II base stocks with a typical viscosity index of • Turbine oils
99-103.
Always confirm that the Chevron product selected whether combined with other base oils/additives or used alone will meet the
required usage specifications or original equipment manufacturers recommendation for the equipment operating conditions and
customer's maintenance practices.
A Chevron company product 22 July 2019

BO-10
© 2004-2019 Chevron U.S.A. Inc. All rights reserved.
Chevron, the Chevron Hallmark and ISODEWAXING are trademarks owned by Chevron Intellectual Property LLC. All other
trademarks are property of their respective owners.
15-2
Chevron Neutral Oil — Continued
• Process oils • Heat transfer fluids

• Lubricant additives
TYPICAL TEST DATA
60R 100R
Product Number 240664 240667
SDS Number 30963 49837
API Base Stock Category (API 1509 E.1.3) Group II Group II+
API Gravity ASTM D1298 32.9 36.0
Specific Gravity ASTM D1298
at 60/60°F 0.861 0.845
Density, lb/gal ASTM D1298 7.167 7.034
Viscosity, Kinematic ASTM D445
cSt at 40°C 10.5 21.21
cSt at 100°C 2.6 4.40
Viscosity, Saybolt ASTM D2161
SUS at 100°F 64 113
Viscosity Index ASTM D2270 70 117
Cold-Cranking Simulator ASTM D5293
cP at -30°C — 2450
cP at -25°C — 1230
cP at -20°C — —
cP at -10°C — —
Pour Point, °C ASTM D97 -33 -15
Evaporation Loss, NOACK, CEC-L-40-A-93
wt % — 16
Flash Point, COC, °C ASTM D92 165 206
Color ASTM D1500 L 0.5 L 0.5
Sulfur, ppm Chevron <6 <6
Water, ppm ASTM D1744 50 <50
Saturates, HPLC, wt % Chevron >99 >99
Aromatics, HPLC, wt % Chevron <1 <1
Minor variations in product typical test data are to be expected in normal manufacturing.
22 July 2019
BO-10
15-3
Chevron Neutral Oil — Continued
TYPICAL TEST DATA
150R 220R 600R

Product Number 581595 246748 246747
SDS Number 11858 6986 6986
API Base Stock Category (API 1509 E.1.3) Group II Group II Group II
API Gravity ASTM D1298 34.0 32.1 31.0
Specific Gravity ASTM D1298
at 60/60°F 0.855 0.865 0.871
Density, lb/gal ASTM D1298 7.119 7.202 7.251
Viscosity, Kinematic ASTM D445
cSt at 40°C 29.4 41.0 106
cSt at 100°C 5.24 6.3 12.0
Viscosity, Saybolt ASTM D2161
SUS at 100°F 150 212 530
Viscosity Index ASTM D2270 112 102 102
Cold-Cranking Simulator ASTM D5293
cP at -30°C 5070 — —
cP at -25°C 2660 5600 —
cP at -20°C 1400 3200 —
cP at -10°C — — 4800
Pour Point, °C ASTM D97 -15 -15 -15
Evaporation Loss, NOACK, CEC-L-40-A-93
wt % 14 11 2
Flash Point, COC, °C ASTM D92 220 230 265
Color ASTM D1500 L 0.5 L 0.5 L 0.5
Sulfur, ppm Chevron <6 <6 <6
Water, ppm ASTM D1744 <50 <50 <50
Saturates, HPLC, wt % Chevron >99 >99 >99
Aromatics, HPLC, wt % Chevron <1 <1 <1
Minor variations in product typical test data are to be expected in normal manufacturing.
22 July 2019
BO-10
15-4

Chevron Base Oil

Uploaded by

Copyright:

Available Formats

Chevron Base Oil

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chevron Base Oil

Uploaded by

Copyright:

Available Formats

CHEVRON NEUTRAL OIL

60R, 100R, 150R, 220R, 600R

PRODUCT DESCRIPTION Chevron Neutral Oil 100R is a 5 cSt Group II "plus"

A Chevron company product 22 July 2019

• Process oils • Heat transfer fluids

TYPICAL TEST DATA

TYPICAL TEST DATA

150R 220R 600R

You might also like