Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    Concentricity Checking Fixture

    Uploaded by

    Divyansh Saxena
    This document provides instructions for inspecting the concentricity of flare cartridge components using a universal concentricity gauge. It lists the components and their corresponding item numbers that will be inspected on each gauge. The procedure describes placing the component on the roller assembly, setting the dial point and making a zero reading, then rotating the spindle to inspect and record readings. A parts list identifies the main pieces of the inspection device.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Concentricity Checking Fixture

    Uploaded by

    Divyansh Saxena
    45 views3 pages
    This document provides instructions for inspecting the concentricity of flare cartridge components using a universal concentricity gauge. It lists the components and their corresponding item numbers that will be inspected on each gauge. The procedure describes placing the component on the roller assembly, setting the dial point and making a zero reading, then rotating the spindle to inspect and record readings. A parts list identifies the main pieces of the inspection device.

    Original Description:

    Universal concentric fixture

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for inspecting the concentricity of flare cartridge components using a universal concentricity gauge. It lists the components and their corresponding item numbers that will be inspected on each gauge. The procedure describes placing the component on the roller assembly, setting the dial point and making a zero reading, then rotating the spindle to inspect and record readings. A parts list identifies the main pieces of the inspection device.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views3 pages

    Concentricity Checking Fixture

    Uploaded by

    Divyansh Saxena
    This document provides instructions for inspecting the concentricity of flare cartridge components using a universal concentricity gauge. It lists the components and their corresponding item numbers that will be inspected on each gauge. The procedure describes placing the component on the roller assembly, setting the dial point and making a zero reading, then rotating the spindle to inspect and record readings. A parts list identifies the main pieces of the inspection device.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    6 5 4 3 2 1

    Parameter:-
    Component :- 26 mm flare cartridge
    D item no. 1, 2, 12, 16. this Dimension D
    will be inspected on this Gauge

    Component :- 50 mm flare cartridge


    item no. 3, 7, this Dimension
    will be inspected on this Gauge
    C C

    Procedure:-
    1. place Componet on roller by
    B B
    lifting bearing Assembly.
    2. place dialpoint on Component as per
    requirement and make zero on dial.
    3. rotate spindle (spindle will rotate componet)
    note down reading on dial.
    4. repeat procedure for next Component.
    A Designed by

    USEr
    Checked by Approved by Date Date

    05-12-2023
    A
    Concentricity inspection DAP drg Universal Concentricity
    1/3 G
    Edition Sheet

    6 5 4 3 2 1
    6 5 4 3 2 1

    PARTS LIST
    D 9 3 13 11 ITEM QTY PART NUMBER DESCRIPTION D
    1 1 Base Plate
    2 1 Main Spindle Block
    3 4 Bearing Cap
    12 4 4 Bearing
    5 2 Brg spacer Inner race
    2 6 2 Brg spacer outer race
    14 7 2 Live Center
    C 8 2 Bearing Locknut C
    9 2 Rotating Knob
    10 1 Case for Cartridge 26 flare
    11 1 Vertical Column to Hold spring
    12 1 Bearing Holder
    13 1 Bearing Shaft
    14 1 Bearing 625zz
    15 1 MGWR15R110CM-Rail STEP AP214
    16 1 MGW15CZFC-Block STEP AP214
    B 17 4 Foot B
    17 1
    18 1 base for Dial stand
    Note;-
    1. spindle Rotation with help of belt design Pending
    2. Stopper for component will be opposite to Dial
    7 18 16 15 3. Dial Attachment design Pending
    A Designed by

    USEr
    Checked by Approved by Date Date

    05-12-2023
    A

    Universal Concentricity
    2/3 G
    Edition Sheet

    6 5 4 3 2 1
    6 5 A-A ( 1 : 2 ) 4 3 2 1
    50
    4
    D D
    4
    256

    C C

    25
    B B

    200

    A
    A
    A Designed by

    USEr
    Checked by Approved by Date Date

    05-12-2023
    A
    300
    Universal Concentricity
    3/3 G
    Edition Sheet

    6 5 4 3 2 1

    You might also like