Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Portfolio

Download as pdf or txt
Download as pdf or txt
You are on page 1of 39

Portfolio

Donia osama
structural engineer
BIM Specialist
About Me
Civil Engineer with Experience in shop drawing for all Structural Elements by using Building
Information Modelling technology ( BIM )
Responsible for Revit standards development and developing workflow procedures for
different(LOD) up to (500) and Participating at strategies development for BIM efficiency
usage 4D and 5D
Revit 3D BIM modelling with high accuracy
Produced Clash detection report
Modelled parametric Revit families (ARC, STR , Precast)
Coordination between different disciplines

CONTENTS
• Project Introduction
• 3D Modeling
• Project Details
Cutting • Schedules
Optimization • Shop Drawing
• Revit Families
• Coordination
• Navisworks
• Clash Matrix
• Clash Test
• Dynamo
• Model Health
Donia Osama
Phone :- 01091346791
Email :- doniaosama14@gmail.com
Selected Work

01 02 03
PROJECT NAME :- Alaraby alalamin

• TYPOLOGY : Administrative Building

• client : Alaraby Group

• Year : 2023
• LOCATION : El Alamin City -Egypt
• SOFTWARES : Revit- Navisworks
• L.O.D :- from 200 to 400
• Project Brief :
The Work At The Hand Was To Create A 3d
Model, Shop drawing for all structural
element , Once all the disciplines
completed their models, I conducted
rigorous warnings and clash detections for
architecture, structure, and MEB
disciplines. All The Modeling Is Done Using
Autodesk Revit And Families Created For
This Project On Revit
• 3D Modeling
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- Shop drawing of Retaining wall & Tank wall 1- Shop drawing of Shoring system , RFT piles and beam pile Cap
plan & sec for each wall & cross section . plan & cross section .
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- Shop drawing of raft with R.C kicker , RFT (Add Bot). 1- Shop drawing of Flat slab with drop panels , RFT bottom (x).
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- Shop drawing of Beams, Sec & cross section 1- RFT Of Sections and Details of Raft.
• Project Details

CONCRETE DIMENSION SHEET FOR :- CONCRETE DIMENSION SHEET FOR :-

1- Concrete Demotions of Ramp is shown 1- Concrete Demotions of stair is shown


plan & sec(x) & sec(y) & 3D plan & sec(x) & sec(y) & 3D
PROJECT NAME :- Alaraby Borg Alarab

• TYPOLOGY : Logistic Building

• client : Alaraby Group

• Year : 2022
• LOCATION : Alex – Borg el arb
• SOFTWARES : Revit- Navisworks
• L.O.D :- from 200 to 400
• Project Brief :
The Work At The Hand Was To Create A 3d
Model, Shop drawing for all structural
element , Once all the disciplines
completed their models, I conducted
rigorous warnings and clash detections for
architecture, structure, and MEB
disciplines. All The Modeling Is Done Using
Autodesk Revit And Families Created For
This Project On Revit
• 3D Modeling
• Project Details

CONCRETE DIMENSION SHEET FOR :-

1- Concrete Demotions of floor plan is shown


plan & sec for every deformation
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- core, Is Shown RFT 1- Beams


plan & sec for each wall & cross section . In plan & sec & Cross section
• Project Details

SHOP DRAWING SHEET FOR :-

1- swimming Pool
In plan & sec (X) & & sec (Y)
for every deformation
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- strip footing , Is Shown RFT 1- Raft consisting dowels of 6 Shear wall & cores
sec (x) & cross section . In plan & sec & table of variable steel
PROJECT NAME :- CONFERENCE HALL_SUHAG
• TYPOLOGY : Military Building

• client :National Army

• Year : 2020
• LOCATION : Suhag – EGYPT
• SOFTWARES : Revit - Navisworks
• L.O.D :- from 200 to 400
• Project Brief :
The Work At The Hand Was To Create A 3d
Model, Shop drawing for all structural
element , Once all the disciplines
completed their models, I conducted
rigorous warnings and clash detections for
architecture, structure, and MEB
disciplines. All The Modeling Is Done Using
Autodesk Revit And Families Created For
This Project On Revit
• 3D Modeling
• Project Details

SHOP DRAWING SHEET FOR :-

1- Structural frame , Is Shown RFT


sec (x) & cross sections in medial & right
& left side & vertical column frame
• Project Details

SHOP DRAWING SHEET FOR :-

1- Structural rounded Foundation has dowels


of core , Is Shown RFT
sec for every deformation & cross sections & 3d
• Project Details

SHOP DRAWING SHEET FOR :-

1- parapet structural above beam ,


Is Shown RFT
sec (x) & cross section
• Project Details

SHOP DRAWING SHEET FOR :- SHOP DRAWING SHEET FOR :-

1- wall Structural consisting of 5 wall with variable depth and height three of them is 1- wall Structural consisting of 3 wall with variable depth and height one of them is
slanted wall , Is Shown RFT slanted wall , Is Shown RFT
In plan & sec (x) for each wall & sec (y) for each side every deformation & 3d. In plan & sec (x) for each wall & sec (y) for each side & 3d.
PROJECT NAME :- I_CITY OCTOBER

• TYPOLOGY : RESIDENTIAL BUILDING


• client : Mountain View

• Year : 2020
• LOCATION : Suhag – EGYPT
• SOFTWARES : Revit-Navisworks
• L.O.D :- from 200 to 400
• Project Brief :
The Work At The Hand Was To Create A 3d
Model, Shop drawing for all structural
element , Once all the disciplines
completed their models, I conducted
rigorous warnings and clash detections for
architecture, structure, and MEB
disciplines. All The Modeling Is Done Using
Autodesk Revit And Families Created For
This Project On Revit
• 3D Modeling
• Project Details

SHOP DRAWING SHEET FOR :-

1- elevator pit _ Structural Foundation


Is Shown RFT
In plan & sec (x) & sec (y) & 3d

2- combined Foundation
Is Shown RFT
In plan & sec (x) & sec (y) & 3d
• Project Details

SHOP DRAWING SHEET FOR :-

1- Structural floor solid & flat slabs ,


Is Shown
Plan Mesh Bot_x_dir

2- SEC Slabs In Different Level


• Project Details

SHOP DRAWING SHEET FOR :-

1- Structural Beams Is Shown


Sec & Cross Sec

2- Carved Beam

3- Broken Beam
• Project Details

CONCRETE DIMENSION SHEET FOR :-

1- structural stairs is shown


plan & sec(x) & sec(y) & 3D
• Project Details

SHOP DRAWING SHEET FOR :-


1- structural columns is shown
plan & sec(x)
column dimension is variable
at each floor .
the splice length is according to
Egyptian code 2020.

2- planted column
from Roof floor to upper Roof
• Project Details

SHOP DRAWING SHEET FOR :-


1- Isolated footings is shown
plan & long direction & long direction & 3D

2- Elevator submit is shown Sec(x) & sec (y)


PROJECT NAME :- CREATE FAMILY

• TYPOLOGY : PRECAST
• Year : 2023
• SOFTWARES : Revit-Navisworks
• Project Brief :
The Work At The Hand Was To Create A 3d
family , Precast element , All The Modeling
Is Done Using Autodesk Revit And Families
Created For This Project On Revit
• Revit Families

3D VIEW FOR :- 3D VIEW FOR :- 3D VIEW FOR :-


Precast Internal Wall Precast External Wall Precast External Wall
With Hollow Core With Hollow Core With Hollow Core
Slab in X_DIR Slab in X_DIR Slab in Y_DIR

Section Detail FOR :- IN PLAN Connection Detail FOR :- IN PLAN Connection Detail FOR :-
Precast Stair With Internal Wall External Wall With Internal Wall External Edged Wall
• Revit Families

Connection Detail FOR :- Connection Detail FOR :- Connection Detail FOR :- Connection Detail FOR :-
External Wall External Wall External Wall Internal Wall
With Hollow Core Slab With difference between With difference between With Hollow Core Slab
With Thickness 325 mm thickness in Hollow Core thickness in Hollow Core Slab With Thickness 325 In Y_Dir
in X_DIR Slab With Thickness 325 mm and
With Thickness 325 mm 200 mm in Y_DIR
and 200 mm in X_DIR
• Coordination
Structure Model Architecture Model
Firefighting Model Mechanical & Plumping Electric Model
Model

Coordination  Clash Detection


Model
• Under Collaborate > Coordinate > • Under manage > inquiry > warnings
Interference Check > Run
Interference

• Solve all Clashes Using Element ID’s • Solve all Warnings Using Element ID’s
• Navisworks
 Clash Detection About Clash Detection
Navisworks clash detection is a valuable process that plays a crucial role in the coordination and
successful execution of construction projects. By utilizing the powerful clash detection
1-Selection Tree 2-Set creation capabilities of Navisworks software, clashes and conflicts between different building elements,
such as architectural, structural, and MEP components, can be identified and addressed. Clash
detection involves the automated analysis of models from different disciplines to identify clashes
where elements intersect or overlap in the virtual space. Once clashes are detected, the clash
resolution process begins
3-Find Items

4- Set Clash Tests By Clash Matrix


• Navisworks
 Clash Detection
5-clash Result 7- clash report_HTML

A clash matrix
shows which disciplines take
precedence based on which ones
are furthest to the top and left of
the matrix. It is easy to see that
6- Export clash report_HTML the matrix reflects the system
hierarchy presented earlier.

Common hard clashes found in various test

The architectural , structural, and MEP files have been consolidated within Navisworks Manage, where clash
detection was conducted among the designated selection sets based on the provided information. Clash
detection reports resulting from this process were shared with the relevant consultants, and necessary
resolutions have been implemented
• Creating And Editing Rivet Sheets

• Creating level by sheet excel • duplicate plans


• C a l c u l a t e I n s u l a t i o n O f F o u n d a t i o n s • S e t I n s u l a t i o n A r e a I n Pa r a m e t e r

• Create Drop Panel Around Column


• Model Health

• by using interoperability tools to Calculate model health


3. Run report  Anther manual way to calculate model health

1. use Revit 2023 best practices

4. Waiting to Run

5. Finally the result of model accuracy


2. Check all marks
THANK YOU
DONIA OSAMA

Linkedin Profile

You might also like