Pendulum Impact Tester for Rigid Plastics

Model 43-76
Introducing a BRAND NEW pendulum impact tester from Testing Machines, Inc.,
a leader in innovative testing instrumentation for all industries.
The NEW 43-76 Pendulum Impact Tester uses a
high resolution optical encoder and state-of-the-art
data acquisition software to determine the impact
resistance of rigid materials in accordance with a
wide variety of ASTM and ISO test standards.
Essentially, impact testing is defined as a single
point test that measures a material’s resistance to
impact from a swinging pendulum. The mass and
drop height deliver a definable kinetic energy that
is recorded for analysis. This test can be used as a
quick and easy quality control check to determine
if a material meets specific impact properties or to
compare materials for general toughness.
The model 43-76 features an improved touchscreen
and software user interface, combined with a
pneumatic clamp for accuracy and repeatability.
Interchangeable pendulums and specimen holders
are available to measure the impact resistance
of a variety of materials. An easily-accessible
polycarbonate shield ensures operator safety.
FEATURES
The 43-76 supports both IZOD and Charpy test
▪ Pneumatic clamp for superior repeatability
methods. The results, i.e. strength, are presented
▪ Multiple Data Export options: USB flash drive, USB on the 7” color touchscreen after each test for
ESC/POS printer, RS232, GraphMaster™ software
quick and easy review. This data can also be easily
▪ Tool-less quick change hammers, swappable weights with ranges exported after testing for further analysis.
▪ 7” digital touchscreen display
▪ Polycarbonate safety shield
▪ Optimized center of percussion minimizes hammer vibration Run Tests Average 1.67

▪ Pneumatic hammer release and automatic brake IZOD ASTM

Minimum
Maximum
1.59
1.78

▪
ft*lb/in 1 ft*lb
Supports classification of specimens according to failure W: 6.350 mm T: 10.16 mm
St Dev 0.08

category (full, partial, hinge and non-break) Test Energy Break Type

▪ Automatically calibrates and accounts for windage and friction 1 1.59 ft*lb/in Complete
2 1.78 ft*lb/in Partial
▪ Sample tray catches and sorts tested specimens 3 1.74 ft*lb/in Full Sample ID
▪ Supports IZOD and Charpy configurations 4 1.59 ft*lb/in Full
TMI
User ID
▪ Multiple language support 5 1.66 ft*lb/in Full 123

▪ Onboard statistics (average, min, max, standard deviation) Not Ready - Run calibration swing?
3:15 PM
Jul 16, 2014

▪ Built-in Izod sample jig for faster and more Menu-driven touch screen for simple operation
repeatable sample placement

APPLICATIONS
Compatible with Plastics, Rubber, Light Metals, Ceramics, Wood,
Laminates, Adhesives

Exclusively from TMI STANDARDS

Meets ASTM D256 and ISO 180 for IZOD, ASTM
Capture test results, analyze and D6110 and ISO 179 for Charpy, ASTM D4508 for
plot data and transfer directly to Chip Impact Testing, ASTM D4812 Un-notched
Excel®, Access®, or clipboard. Cantilever Beam
Pendulum Impact Tester for Rigid Plastics
Model 43-76 Features and benefits

FAST CYCLE TIMES

Optimized for maximum efficiency in test cycle times, providing an
increase of 20% in testing speed compared to previous models.
▪ Spring-loaded Izod positioning tool and pneumatic clamp
▪ Optional co-residing Izod clamp and Charpy rests
▪ Tool-less quick change pendulum
▪ Optional push button drop height change
▪ Automatic brake with automatic release
▪ Automatic pendulum hanger with automatic release
▪ Automatic windage and friction correction

Optional co-residing Izod clamp and Charpy rests

FLEXIBILITY
One instrument provides a variety of testing solutions. With no
need for multiple machines, capital dollars are saved.
▪ ISO/ASTM drop height support
▪ Charpy/Izod methods
▪ Adjustable pressure pneumatic clamp
▪ Universal (110/220 VAC) power supply
▪ 1 joule to 22 joule (0.74 ft·lb to 16.2 ft·lb) energy range
▪ Interchangeable weights for some energy ranges

Tool-less quick change hammers, swappable weights with ranges

SAFETY
Equipped with an optional polycarbonate shield with electronic
safety interlock system that prevents pendulum release while the
access door is open. Less downtime saves time and money.
▪ Optional polycarbonate safety shield
▪ Electronic safety interlock system
▪ Emergency stop button

Emergency stop button ensures operator safety

ACCURACY
A precision instrument designed for accuracy and repeatibility.
Robust design and intuitive features ensure repeatable results.
▪ Adjustable pneumatic clamp for superior repeatability
▪ Optimized pendulum geometry
▪ Encoder with superior angular resolution

Optimized center of percussion minimizes hammer vibration

 Pendulum Impact Tester for Rigid Plastics
Ordering options Model 43-76
Base
Description Part #
43-76 IZOD Pendulum Impact Tester
Includes Pneumatic IZOD Clamp, Choice of Pendulum, 43-76-01-0001
Automatic Brake, Touchscreen Controller

43-76 Charpy Pendulum Impact Tester

Includes Charpy Rests, Choice of Pendulum, Automatic Brake, 43-76-01-0002
Touchscreen Controller, ISO 179 Drop Height Available

Hardware
Description Part # Installation
Izod Pneumatic Clamp Assembly 43-76-01-203 Factory installation only

Charpy Rest Assembly (Includes ASTM Inserts) 43-7B-01 Field installation (by service technician)

ISO 179 Drop Height Assembly 43-76-01-205 Field installation (by service technician)

Shield Assembly Complete 43-76-01-202 Field installation (by service technician)

Shield Sample Catcher 43-76-01-209 Field installation (by customer)

Specimen Remains Container Assembly 43-76-01-208 Field installation (by customer)

Izod Hammers
43-7A-xx Field installation (by customer)
Range: 1 to 22 Joules (0.74 to 16.2 ft. lb.)
Charpy Hammers
43-7B-xx Field installation (by customer)
Range: 1 to 22 Joules (0.74 to 16.2 ft. lb.)

Izod Weight: 2 to 4 ft. lb. range and 5 to 7 ft. lb. range 43-7A-xx-100 Field installation (by customer)

Charpy Weight: 2 to 4 ft. lb. range and 5 to 7 ft. lb. range 43-7B-xx-100 Field installation (by customer)

Charpy ISO 179 Inserts 43-0B-25 Field installation (by customer)

IZOD ISO 180 Inserts 43-7A-26 Field installation (by customer)

Software
Description Part # Installation
GraphMaster™ software 03-84 CD with USB dongle

22-05 Motorized Notching Cutter

Used in conjunction with the Model 43-76 Pendulum Impact Tester for Rigid Plastics,
the Motorized Notching Cutter produces a notch in a test specimen for ASTM
D 256 and ISO 180 according to the IZOD Standard. Charpy notches can also be
made according to ASTM D 6110 and ISO 179. Automating the specimen notching
procedure ensures a repeatable and accurate cut every time. An easy to use thickness
gage is included to verify the depth cut before testing.
Pendulum Impact Tester for Rigid Plastics
Model 43-76
Enter Sample ID: EASY-TO-USE TOUCHSCREEN INTERFACE
The model 43-76 features a dynamic touchscreen user
interface that allows for complete user interactivity and
1! 2 @Run3 Tests
# 4$ 5% 6^ 7& 8* 9( 0Average
)
1.67 instrument control. The 7” full color screen displays a resolution
Minimum 1.59
q w IZODe
ft*lb/in
r tASTM y
1 ft*lb
u i o pMaximum 1.78 of 800×480 pixels and can be easily pivoted and rotated to allow
for optimum viewing in almost any environment.
St Dev 0.08
a W: 6.350
s mm
d fT: 10.16
g mm h j k l
Aa z Testx Energy
c v b Break
n Type
m Generate
1 1.59 ft*lb/in Complete Default ID Software features include save/load tests, custom test and sample
2 1.78 ft*lb/in Partial IDs, data export via RS-232 and USB, maintenance and diagnostics
3 1.74 ft*lb/in Full Sample ID
TMI menus, multiple language support, and more.
4 1.59 ft*lb/in Full
User ID
5 1.66 ft*lb/in Full 123 Calibration of hammer windage and friction is accessed through
Not Ready - Run calibration swing?
3:15 PM
Jul 16, 2014
the touchscreen interface and is completed in a few simple steps.

SPECIFICATIONS
Model 43-76
J/m Ft·lb/in²
Selectable units Ft·lb./in. Kg·cm/cm²
Kg·cm/cm KJ/m²

Specimen width, height,

Fully supports ASTM and ISO IZOD & Charpy
and thickness

Selectable break type result Complete, Hinge, Partial, Non-break

Specimen holders
Pendulums
Options
GraphMaster™ software
Integrated ISO 179, ASTM, or both drop heights
Output USB, RS-232
Power 120V/240VAC 50/60 Hz

100 PSI nominal (60 PSI minimum) - IG4 Instrument Grade Air (ISO Class 1-4-1)
Air
¼” OD tubing

Energy ranges 1 joule to 22 joule (0.74 ft·lb to 16.2 ft·lb)

INSTRUMENT SIZE
Dimensions 36” x 20” x 38”
Weight (approx.) 235 lbs

STANDARDS
Meets ASTM D256 and ISO 180 for IZOD, ASTM D6110 and ISO 179 for Charpy, ASTM D4508 for Chip Impact Testing,
ASTM D4812 Un-notched Cantilever Beam

©2015 Testing Machines, Inc. All rights reserved. Specifications subject to change.

Testing Machines, Inc. Messmer Büchel (Büchel BV) Adamel Lhomargy SARL CMC-KUHNKE
Delaware, USA Veenendaal, Netherlands Roissy en Brie, France Berlin, Germany

FIBRO System AB PT. TMI Asia TMI Trading (Shanghai) Co., Ltd.
The TMI Group of Companies Stockholm, Sweden West Java, Indonesia Shanghai, China
Phone: (302) 613-5600 Fax: (302) 613-5619
info@testingmachines.com Visit us on the web at: www.testingmachines.com