KX NT511P

ORDER NO.
KMS1403016CE
IP Proprietary Telephone
Model No. KX-NT511PXW
KX-NT511PXB
KX-NT511PSXW
KX-NT511PSXB
White Version
Black Version
(for Asia, Middle Near Esat, Latin America, Africa
and India)
© Panasonic System Networks Co., Ltd. 2014

Unauthorized copying and distribution is a violation
of law.
KX-NT511PXW/KX-NT511PXB/KX-NT511PSXW/KX-NT511PSXB
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3 11.1.1. Main Board ------------------------------------------- 32
1.1. For Service Technicians ---------------------------------3 11.1.2. Operation Board------------------------------------- 32
2 Warning --------------------------------------------------------------4 11.1.3. PoE Board -------------------------------------------- 32
2.1. About Lead Free Solder (PbF: Pb free) --------------4 11.2. How To Replace a Flat Package IC ----------------- 33
2.1.1. Suggested PbF Solder -------------------------------4 11.2.1. Preparation ------------------------------------------- 33
2.2. Discarding of P. C. Board --------------------------------4 11.2.2. Removal Procedure -------------------------------- 33
3 Specifications ------------------------------------------------------5 11.2.3. Procedure--------------------------------------------- 33
4 Technical Descriptions------------------------------------------6 11.2.4. Removing Solder From Between Pins--------- 33
4.1. Block Diagram ----------------------------------------------6 12 Schematic DiagramLOcation ------------------------------- 34
4.2. Circuit Operations ------------------------------------------7 12.1. Main No.1-------------------------------------------------- 34
4.2.1. LCD Circuit----------------------------------------------7 12.2. Main No.2-------------------------------------------------- 36
4.2.2. Reset Circuit --------------------------------------------7 12.3. Main No.3-------------------------------------------------- 38
4.2.3. Ethernet Circuit ----------------------------------------8 12.4. Ope---------------------------------------------------------- 40
4.2.4. Analog Circuit ------------------------------------------8 12.5. PoE---------------------------------------------------------- 42
4.2.5. Key Circuit-----------------------------------------------9 12.6. Waveform -------------------------------------------------- 44
4.2.6. LED Circuit -------------------------------------------- 10 12.6.1. No.(1)-(6)---------------------------------------------- 44
4.2.7. Power Supply Circuit ------------------------------- 11 12.6.2. No.(7)-(14) ------------------------------------------- 45
5 Location of Controls and Components------------------ 12 12.6.3. No.(15)------------------------------------------------ 46
5.1. Name and Locations ------------------------------------ 12 13 Printed Circuit Board------------------------------------------ 47
6 Installation Instructions--------------------------------------- 13 13.1. Main Board ------------------------------------------------ 47
6.1. Connections ----------------------------------------------- 13 13.1.1. Component View ------------------------------------ 47
7 Test Mode ---------------------------------------------------------- 14 13.1.2. Bottom View ------------------------------------------ 48
7.1. Loopback Test Mode ------------------------------------ 14 13.2. Operation Board ----------------------------------------- 49
7.1.1. Preparation-------------------------------------------- 14 13.2.1. Component View ------------------------------------ 49
7.1.2. Communication Test -------------------------------- 14 13.2.2. Bottom View ------------------------------------------ 50
7.1.3. Quit Test Mode for communication test ------- 14 13.3. PoE Board ------------------------------------------------- 51
7.2. KEYs and LEDs Test mode---------------------------- 15 13.3.1. Component View ------------------------------------ 51
7.2.1. Preparation-------------------------------------------- 15 13.3.2. Bottom View ------------------------------------------ 52
7.2.2. KEYs and LEDs Test ------------------------------- 15 14 Appendix Information of Schematic Diagram -------- 53
7.2.3. Quit KEYs and LEDs Test mode----------------- 15 15 Exploded View and Replacement Parts List----------- 54
8 Service Mode ----------------------------------------------------- 16 15.1. IC Data ----------------------------------------------------- 54
8.1. Factory Setting-------------------------------------------- 16 15.1.1. IC101--------------------------------------------------- 54
8.1.1. How to Clear User Setting ------------------------ 16 15.1.2. IC201--------------------------------------------------- 60
9 Troubleshooting Guide---------------------------------------- 16 15.2. Cabinet and Electric Parts----------------------------- 62
9.1. No Operation ---------------------------------------------- 16 15.3. Accessories and Packing Materials ----------------- 63
9.1.1. Power ON Error-------------------------------------- 16 15.4. Replacement Parts List -------------------------------- 64
9.1.2. Power Supply : AC adaptor ----------------------- 17 15.4.1. Cabinet and Electrical Parts---------------------- 64
9.1.3. Power Supply : PoE -------------------------------- 17 15.4.2. Accessories and Packing Materials ------------ 64
9.1.4. Table-1: PORT OUTPUT at ERROR ----------- 19 15.4.3. Main Board Parts ----------------------------------- 64
9.2. LCD Does Not Operate --------------------------------- 23 15.4.4. Ope Board Parts ------------------------------------ 67
9.3. Handset Does Not work -------------------------------- 24 15.4.5. PoE Board Parts ------------------------------------ 67
9.3.1. Receive ------------------------------------------------ 24 15.4.6. AC adaptors List ------------------------------------ 68
9.3.2. Send ---------------------------------------------------- 24
9.4. Speaker-Phone Does Not Work ---------------------- 25
9.4.1. Receive ------------------------------------------------ 25
9.4.2. Send ---------------------------------------------------- 25
9.5. Ethernet Does Not work -------------------------------- 26
9.5.1. PHY Data Error -------------------------------------- 26
9.5.2. LAN port ----------------------------------------------- 27
9.5.3. PC port ------------------------------------------------- 27
9.6. LED Does Not Light ------------------------------------- 28
10 Disassembly and Assembly Instructions --------------- 29
10.1. Remove Main Board and Ope Board --------------- 29
10.2. Remove and Assembly for LCD -------------------- 30
10.3. Assembly for Lead wire--------------------------------- 31
11 Maintenance ------------------------------------------------------ 32
11.1. Terminal Guide of the ICs Transistors and
Diodes------------------------------------------------------- 32
2
1 Safety Precautions
1. Before servicing, unplug the AC power cord to prevent an electric shock.
2. When replacing parts, use only the manufacturer's recommended components.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
1.1. For Service Technicians

• Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires,
injury or electric shock, which can be caused by improper repair work.
1. When repair services are provided, neither the products nor their parts or members shall be remodeled.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
• ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
3
2 Warning
2.1. About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that
contains lead.
We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver (Ag), and Copper (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50 F ~ 70 F (30 C ~ 40 C) higher than Pb solder. Please use a soldering iron with
temperature control and adjust it to 700 F ± 20 F (370 C ± 10 C).
• Exercise care while using higher temperature soldering irons.: 
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 F (600 C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See the figure below).
2.1.1. Suggested PbF Solder

There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
2.2. Discarding of P. C. Board

When discarding P. C. Board, delete all personal information such as telephone directory and caller list or scrap P. C. Board.
4
3 Specifications
Item KX-NT511PX/PSX
Display Main 1 line
Flexible Buttons 3
VoIP Connection Method MGCP
VoIP Audio Codec G.722, G711, G.729A
Ethernet Interface 10Base-T/100Base-TX
IP Address Mode Automatic (DHCP), Manual (static)
Speaker 1
Microphone 1
Ethernet Port (LAN) 2 (RJ45)
Dimensions
175 mm x 159 mm x 171 mm
(W x D x Hmm)
Weight
(with handset, handset cord 730 g
and stand)
PoE
Stand-by : approx. 1.4W(ECO mode off), approx, 0.9W(ECO mode on)
Talking : approx. 1.5W(ECO mode off), approx, 1.0W(ECO mode on)
Power Consumption
AC Adaptor
Stand-by : approx. 1.3W(ECO mode off), approx. 0.8W(ECO mode on)
Talking : approx. 1.5W(ECO mode off), approx. 1.0W(ECO mode on)
Maximum Power Consumption 2.1 W
Operating Environment 0 to 40
5
4 Technical Descriptions
4.1. Block Diagram
+3.3V +3.3V
Flash SDRAM DSPG DVF9919 Power supply

1Gbyte 256Mbyte
+5.5V
DC IN
MPMC
+5V
NAND IF Reset
Audio RSTN
Detect
MICBIAS Voltage
Handset
HSMICIN
CN +3.3V
HSSPOUT +3.3V DC/DC
Internal +1.8V
Internal +1.2V
AFE
MIC MICBIAS
LAN PCB
MIP/MIN
+8V
SPP/SPN +3.3V Ethernet I/F
802.3af
Speaker Fast PoE IC
L2 Switch
with PHY +48V
+1.8V
TX_EN
TXD[3:0]
TX_CLK
RX_CLK
UART(1) RX_DV
PULSE RJ45 CON
MII RX_ER P_5 P_0
Trans To LAN
LED&KEY I/F RXD[3:0]
CRS
COL 10/100BASE-T
MDC
+3.3V MDIO
LED 10Port P_1

PULSE RJ45 CON
GPIO Trans
PHY_nRST To PC
GPIO
PHY_INT
INT 10/100BASE-T
CN 5 x 5 matrix
25MHz
Key matrix KEY
HOOK_DET 12
HOOK SW GPIO Xtal MHz
Ope PCB
25
+3.3V Xtal MHz
LED
GPIO
LED PCB Xtal

+5V
LCD module USB(1)
+3.3V
For
CONTRAST USB(2)
TEST
LCD_RST GPIO
LCD LCD_RS
CN GPIO
LCD_CS
LCD_SCL
LCD_DO SPI(1) SPI(2)
Main PCB
NT511PX/PSX Block Diagram
6
4.2. Circuit Operations

4.2.1. LCD Circuit
LCD data are output from pin 66 of IC101 to LCD module.
LCD contrast is set by electronic volume(pin H18,H19).
To LCD
IC101 CN2
3.3V
RA110 1
6 3 Vss
F14
5 4 LCD_A0 2
G14 ResetB
7 2
E15 LCD_CS 3
8 V0
E17 1
LCD_D0 4 V1
LCD_CLK L103
5 V2
6 V3
7 V4
C129
C130 8 Vss
LCD_5V C131 9 Vdd
C132 10 SCL
R140
C133 11 SI
5V
12 CSB
LCD_RST 13 RS
R143 C135 14 Vss
C134
Q106
R142
R141
5
1
2 DGND DGND
3 DGND
4
H18
DGND
H19
H17
R145
R144
DGND
4.2.2. Reset Circuit

Reset Signal is output from IC301 and input into IC101-pin V12.
P13
VDD3.3V TPX2
R18
TPY1
T18
TPY2
5V P18
TPS
R305
IC301
R306 PWR_RST
1 VSS 4 V12
RSTN
DGND OUT T12
TEST_ANA
2 VDD 3 C328 R304 TEST_ANA L16 IF_CLK_IF
CD P14
VREF
C326 C327
DGND C329 C330
VDD1.2V D12
DGND VDD0
E5
VDD1
AGND E6
VDD2
DGND E8
VDD3
H5
VDD4
7
4.2.3. Ethernet Circuit

The Layer2Switch IC (IC201) is used for the Ethernet interface.
It is connected from IC201 to the Ethernet port (JK1 and JK2) through a transformer and so is isolated.
It is connected between IC201 and the BBIC (IC101) by high-speed bus called MII (Media Independent Interface) bus operating
with 25MHz.
3.3V L2SW_3.3V
L201
25MOUT 001:4C
C216
C217
C218
C273
C220
C221
C215
C219
L2SW_3.3V
E_TXER
E_TXEN
270 E_TXCLK
E_TXD[0]
E_TXD[1]
E_TXD[2]
E_TXD[3]
L203
DGND
C211
C212
C213
NC
R214
L2SW_1.8V
1.8V L2SW_1.8V
DGND DGND
L204
C203
L202
PC_TXP
D201 R205
12 5
TX1P
JK1
DGND 13 4
PC1
SMTXER3/MII_LINK_3 24
SMTXC3/REFCLKI_3 23
VDDIO1 22
GND1 21
SMTXD30 20
SMTXD31 19
SMTXD32 18
SMTXD33/EN_REFCLKO_3 17
SMTXEN3 16
X2 15
X1 14
NC 13
4 1
10
L206
C223
C225
C226
C228
C227
C222
C224
C207 9 8
D202 R206
DGND TX1M
E_RXDV R215 PC_TXP 7
SMRXDV3 TXP2 12 PC_TXM DGND 3 2
E_RXD[3] RA201 1 8 25
PC_TXM 11 6
PC2
DGND E_RXD[2] 2 7 26 SMRXD33/REFCLKO_3 TXM2 11
SMRXD32 AGND 10
RX1P
E_RXD[1] 3 6 27
PC_RXP 15
SMRXD31 RXP2 9 PC_RXP
E_RXD[0] 4 5 28
PC_RXM 14 3 4 1 PC3
E_RXCLK R220 L205 29 SMRXD30 RXM2 8
D203 R207
30 SMRXC3 VDDA_1.8 7 R213 2 L207
1 8 31 GND2
VDDC
IC201 ISET 6
VDDA_3.3 5 C204
16 1 RX1M
E_COL 2 7 32
WAN_TXP
IC101 E_CRS 3 6 RA202 33 SCOL3
SCRS3
TXP1 4
TXM1 3
WAN_TXM
D204
C208
T1 3 2
PC4
R201
R202
PHY_INT 34
WAN_RXP DGND R208
E_MDCLK 35 *INTRN RXP1 2
4 5 WAN_RXM PC_RXM DGND
E_COL 36 SCL_MDC RXM1 1 DGND
SDA_MDIO
001:5B E_COL PCR

4.7k
P2LED0
VDDIO2
P1LED1
P1LED0
P2LED1
VDDCO
*SPISN
E_CRS FXSD1
*RSTN
001:5C E_CRS
SPIQ
PC5
GND
E_RXD[3]
001:5C E_RXD[3]
R216
46
47
48
C201
37
38
39
40
41
42
43
44
45
E_RXD[2]
001:5C E_RXD[2]
E_RXD[1] C205
001:5C E_RXD[1]
E_RXD[0]
001:5C E_RXD[0] WAN_TXP
DGND TX2P
E_RXDV
R217
R218
R219
R242
R243
R230
R231
R232
R244
C214
001:5B E_RXDV D205 12 5

1.8V
R209 DGND
E_RXCLK LAN1
001:5B E_RXCLK 13 4
E_TXEN 4 1
001:5C E_TXEN 10
E_TXD[3] C209 L208
001:5B E_TXD[3] D206 9 8
DGND R210 TX2M
E_TXD[2]
001:5B E_TXD[2] 7
WAN_TXM DGND 3 2
E_TXD[1] DGND LAN2
001:5B E_TXD[1] 11 6
E_TXD[0] RX2P
001:5B E_TXD[0] 15
WAN_RXP
E_TXER LAN3
001:5C E_TXER 14 3 4 1
E_TXCLK D207 R211
001:5B E_TXCLK 2 L209
E_MDCLK RX2M
001:5B E_MDCLK C206
16 1
E_MDIO 3 2
001:5B E_MDIO C210 T2 LAN4
E_RST D208 R212
E_MDIO
001:5C E_RST DGND

E_RST
PHY_INT WAN_RXM DGND DGND PoE1

001:4C PHY_INT
PoE2
E_RXD[0]
E_RXD[1]
E_RXD[2]
E_RXD[3]
E_TXD[0]
E_TXD[1]
E_TXD[2]
E_TXD[3]
R203
R204
JK2
C255
C256
LNR
C257
C258
C259
C260
C261
C262
C263
C264
LAN5
C202
DGND
DGND
4.2.4. Analog Circuit

1. Speaker phone call
Transmitting signal is input from microphone (differential amplifier circuit)  input to IC101-L19, M19
 A/D conversion, Gain adjustment and echo cancel by a built-in DSP of IC101.
Receiving signal input from IP Line  Gain adjustment and D/A conversion by DSP of IC101
 output from IC101-V18, V19  output to Speaker.
L303 IC101
CL-SPP
SPP L301 22u R329
V19
C373
C37
C375
D305 L304
C377
C378
Speaker
CL-SPM
DGND DGND DGND DGND
SPM L302 R330
V18
G1C220MA0249
C376
C374
C380
D306
DGND DGND DGND

DGND
MICBIAS
R324 C369
R325
CL-MICP AGND C383
MICP R327 R322 C365 R320 AGND
L19
C371
D307 C367 C363
AGND AGND C370 AGND AGND C362

Mic NC
CL-MICM
R323
MICM R328 220
C384 M19
C366 R321 AGND
R326 C364
D308 C372 C368
AGND AGND AGND AGND AGND
8
2. Handset call
Transmitting signal is input from handset microphone  input to IC101-K18, K19
 A/D conversion, Gain adjustment by a built-in DSP of IC101.
Receiving signal input from IP Line  Gain adjustment and D/A conversion by DSP of IC101
 IC101-V18, V19 output from  output to handset speaker.
IC101
MICBIAS
R315
C355
AGND
CL-HS_MICP R316
C381
HS_MICP L310 R313 C351 R311 AGND
M18
C391 D301 C357 C353
D309
C356 C348
CL-HS_MICM AGND AGND

AGND
HS_MICM AGND AGND L311 R314 R312
C352 C382
M17
C392 AGND
D302 C358 R317 C354 D310
Handset AGND AGND AGND AGND AGND AGND

Jack
CL-HS_SPP
HS_SPP L305
K18
C359
C361 D303 NC
330p D4ED18R00008
CL-HS_SPM
HS_SPM L306 AGND AGND
K19
C360
D304 NC
D4ED18R00008
AGND AGND
4.2.5. Key Circuit

The key data is under the matrix control by IC205.
The key information output from LED_STB is input into KEYIN, when the key is pressed.
The HOOK key is independent from Key Scan Matrix and taken into the port singularly.
IC101
SPAMPEN
KEYOUT[4]
T10
SPP
SPNV9
KEYOUT[3] 【Ope PCB】
KEYOUT[2]
W9
KEYOUT[1]
T9
KEYOUT[0]
U9
FF1 FF2 FF3 CONF UP

12 12 12 12 12
KEYIN[4]
V8
ICM 1 2 3 DOWN
12 12 12 12 12
KEYIN[3]
R9
FLASH 4 5 6 TRANSFER
12 12 12 12 12
KEYIN[2]
MIPW8
MUTE 7 8 9 HOLD
12 12 12 12 12
KEYIN[1]
U8
REDIAL * 0 # SP-PHONE
12 12 12 12 12
KEYIN[0]
T8
OPE_3.3V
R405
SW1
1
KEYIN[5] 3
V10 2
4
6
5
HOOK SW
9
4.2.6. LED Circuit

The lighting of the LEDs is controlled by IC101.
All LEDs are static lighting system.
IC101
SPAMPEN
SPP OPE_3.3V 【Ope PCB】

SPN Q101
5
1
R10
R163 L401
2
P7 3
4
R164
Q102
5
W7 1
R165 R147
2 LED[0]
U10 3 R148 LED[1]

4
R166 R149 LED[2]
LED404
LED405
LED406
Q103 R150 LED[3] LED401 LED402 LED403
5 1 3 1 3 1 3
1 R151
P10 LED[4]
R167
2 R152 R G R G R G
LED[5]
2 4 2 4 2 4
ICM
3
MUTE
U11 FF1 FF2 FF3
SP-PHONE
4 R153 LED[6]
R168
R154 LED[7] LED[0]
Q104
5 R155 LED[8] LED[1]
P9 1
R169 LED[2]
2
LED[3]
3
P8 4 LED[4]
R170
MIP LED[5]
Q105
5 LED[6]
1
R11 LED[7]
R171
2
LED[8]
3 R156
R12 4 LED_K
R172
【LED PCB】
3.3V
DGND LED_A
MESSAGE
LED407
LED-A
LED-K
10
4.2.7.
AC
5.5V/500mA About 5V Contrast
5V Main LCD
LCD
42 57V
DCDC +3.3V
8V 3.3V
DVF 1.8V
RJ45 + 1.2V
(LAN) PoE DCDC/Digital Panell
-
DCDC LED
Power Supply Circuit
D Amplifier
KEY
PoE_G PoE_AG
Analog
3.3VA
+5V_from PC Handset
USB
Speaker
DDR IF
Termination MIC
11
SDRAM
NAND FLASH
RJ45
(PC)
L2SW
Digital Part
VDD(3.3 or 2.5)
Termination INTERNAL_1.2V
Analog Part
INTERNAL_1.8V
INTERNAL_1.8V
AG
DG
5 Location of Controls and Components

5.1. Name and Locations
Front View
1 LCD (Liquid Crystal Display)

1 lines
2 Message/Ringer Lamp:
When you receive an intercom call, the lamp flashes red
and on an outside call, the lamp flashes red. When someone
has left you a message, the lamp stays on red.
3 Flexible CO Buttons: Used to seize an outside line or perform
a feature that has been assigned to the key.
4 Handset Hook: Keeps the handset stable when the unit is
mounted on a wall.
7 CONF/STORE: Used to establish a multiple party conversation or
store programme changes.
9 FLASH/RECALL: Used to disconnect the current call and
make another call without hanging up.
10 REDIAL: Used to redial the last dialed number.
11 AUTO ANS/MUTE: Used to receive an incoming call in
hands-free mode or mute the microphone/handset during a
conversation.
12 TRANSFER: Used to transfer a call to another party.
14 HOLD: Used to place a call on hold.
15 INTERCOM: Used to make or receive intercom calls.
16 SP-PHONE (Speakerphone): Used for performing

hands-free operations.
17 Microphone: Used for hands free conversations.
18 Volume Key: Used to adjust the volume and the display contrast.
12
6 Installation Instructions
6.1. Connections
Note
• When connecting a headset, the following headsets can be used with this unit.
(Not all operations with the headsets can be guaranteed.)
For up-to-date information about headsets that have been tested with this unit, please contact your dealer.
When selecting Ethernet cables (not included)

• Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
• Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm in diameter or less.
When connecting to a switching hub

• If PoE is available, an AC adaptor is not needed.
• Comply with the PoE Class 1 standard.
When connecting a PC
• The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor

• Ensure that the Ethernet cables and the AC adapter cord are clamped to prevent damage to the connectors.
13
7 Test Mode
7.1. Loopback Test Mode
This is for VoIP Communication Test Connection Chart.
AC Adaptor : PNLV226**
or Equivalent
or PoE(to LAN port)
7.1.1. Preparation
Preparation device
• Unit for Test phone
• AC adaptor( or LAN cable and switching hub with PoE)
Set up unit in test mode by key control

1. Connect power plug (AC adaptor/PoE).
2. Push [1][ ][CONF] keys within 5 seconds after power on and turn off the Red LED.
3. Keep it until "Now Loading" is displayed on LCD.
Now Loading
*If "IPL start..."is displayed before "Now Loading" on LCD,it fails in the setting for Test mode
Try agin from Step.1
4. Release keys.
5. After 10 seconds,"HOOK Test" is displayed on LCD.
6. Press "SP-phone" key 6 times slowly.
"ACOUSTIC TEST" is displayed on LCD.
7.1.2. Communication Test

It is set to Loopback Test mode to connect "Send signal" with "Receive signal" by inputting two number.
Input number is 6 and 7 and the mode is as follows

(I) : Input 6.SP-phoneMIC 7.HandsetMIC
(O): Output 6.SP-phoneSP 7.HandsetSP
For example
1. Handset MIC  Handset SP
7 7
I:HsMic / O:HsSp
 No sound
2. Handset MIC  SP-phone SP

7 6
I:HsMic / O:Sp
 OK
This result shows there is a problem in the signal line of Handset SP.
7.1.3. Quit Test Mode for communication test

Just power off.
14
7.2. KEYs and LEDs Test mode

This unit has the KEYs and LEDs Test mode.
By using this mode, you can easily check KEYs and LEDs.
7.2.1. Preparation
Preparation devise:
• Unit for Test phone
• AC adaptor (or LAN cable and switching hub with PoE)
Set up a unit in KEYs and LEDs Test mode by key control

1. Connect power plug(AC adaptor/PoE).
2. Press "1", " " and "CONF" keys at the same time within 5 seconds after power on and turn off the Red LED. Keep it until
"Now Loading" is displayed on LCD.
3. Release keys.
4.After 10 seconds,all red LED turn on and beep sounds is heard.
7.2.2. KEYs and LEDs Test

1. Then the LCD displays [HOOK Test].
(When skip [HOOK Test], Press SP-PHONE key. )
The SP-PHONE LED is on/off according to HOOK switch.
Press SP-PHONE key.
2. Then the LCD displays all dots.
Confirm all dots of LCD are on.
Press SP-PHONE key.
[KEYs Test]
3. Then the LCD displays [Key-Check Test] .
Press all keys except SP-PHONE key.
Press SP-PHONE key. LCD displays [Key-Check OK]
[LEDs Test]
4. Confirm all red LEDs and intercom LED turn on.
Press SP-PHONE key.
5. Confirm all red LEDs of CO line change to green
(LCD displays [VER: xx.xxx])
Press SP-PHONE key
6. Then the LCD displays [RESONANCE TEST]
Confirm the resonance by speaker sound.
7. Then the LCD displays [ACOUSTIC TEST]
This TEST mode is not used in service.
7.2.3. Quit KEYs and LEDs Test mode

It is OK to quit anytime during test mode. Disconnect AC adaptor.
15
8 Service Mode
8.1. Factory Setting
8.1.1. How to Clear User Setting
Units are reset to the Factory settings by this operation (Erase stored Phone numbers, Caller list and etc.).
This operation should not be performed for a usual repair.
To perform IP Reset
1. Connect power plug(AC adaptor)
2. Press "1", "5", "9" and " " at the same time within 5 seconds after power on.
Keep it until "Now Loading" is displayed on LCD.
3. Release keys.
4. After 10 seconds,all LEDs turn on.
Beep sounds is heard.
(LCD displays [Please wait...])
5. Power off.
9 Troubleshooting Guide
9.1. No Operation
9.1.1. Power ON Error
Check the soldering.
Resolder or replace parts as needed.
When input any POWER(AC adaptor or PoE). No Related parts: Power supply
Does RINGER-LED(Red) light? See 9.1.2 AC Adaptor. (P.17)
See 9.1.3 PoE (P.17)
Yes
No Check the TEST POINT(ST0-ST3).

Does RINGER-LED(Red) light out?
See Table-1. (P.19)
Yes
Confirm the LCD Display. No Related parts: RA110,L103,C129,C130,C131,

Is it working? C132,C133,C134,C135,R140,
R141,R142,R143,R145,Q106,
CN2,LCD Module
Yes See 9.2 LCD Does Not Operate. (P.2)
END
16
9.1.2. Power Supply : AC adaptor

Measure the voltage at TP:DCIN1. No
Related parts: JK700, F700, L704, C739, C756,
Is it about 9V? D707, D705, IC701-704, C733,
C727, C717, C747, C759-761,
Yes C754
GO TO A
Note:
Refer to waveform (1),(2) and (3) Waveform (P.44) .
9.1.3. Power Supply : PoE
Measure the voltage between Pin + and - of D401. No Related parts: JK2, T2, L411-L414, R403,
Is it about 48V? R404, R202, R204, C426, C427,
C255, C256, C202, D401, D402
Yes
Measure
Measurethe thevoltage
voltagebetween
at TP5V.
Pin 7 and 8 of IC401. No
Related parts: IC401, F401, L415, D403, C401
IsIsit itabout
5V? 48V?
Yes
Related parts: IC401, Q401, D406, L417, R418,

Confirm
Measure thethe voltage at
waveform of TP
PoE3.3V.
Swiching Regulator No
R416, R417, R414, R415, C406,
Is it 3.3V?
signal at Pin(Gate) of Q401. R411-R413, C412, C411, C402,
See the communication waveform(15). C403
Yes
Related parts: D408, L418, C425, R420, R421,

Measure the voltage at TP:8V(8V). No R422, R419, C415, C423, C422
Is it about 8V? C421, C420, C419, C418, C417,
IC202
Yes
GO TO A
17
A
Yes Resolder or replace parts as needes.
Measure the voltage at TP

TP5V.
5V. No
Related parts: R233,R241,D211,C236,C239
Is it 5V?
Yes
No Related parts: IC202,R234-R239,C235,C237,

Measure the voltage at TP 3.3V.
C243,C241,C245,C247,C249,
Is it 3.3V?
C251,C253,L211
Yes
Measure the voltage at TP CL±VDD1.8V. No

Related parts: IC101,C304,C305,C344
Is it 1.8V?
Yes
Measure the voltage at TP CL±VDD1.2V. No

Related parts: IC101,L307,C303
Is it 1.2V?
Yes
Confirm the waveform of reset signal at No

TP PWR_RST. Related parts: IC301,R305,R306,C326-C328
See the communication waveform(1)*.
Yes
Measure the frequency of clock signal at

Pin 1 of X1 No
Related parts: X1,C101,C102,R110,R111,IC101
is it 25MHz?
Yes
Measure the frequency of clock signal at

Pin 1 of X2 No
Related parts: X2,C103,C104,R112,R113,IC101
is it 12MHz?
Yes
Recheck the TEST POINT(ST0-ST3). No Related parts: See Table-2(P.2) to

See Table-1. (P.19) Table-5(P.2).
Is it "NOT Error (No.14)" ?
Yes
Confirm the LCD display. No Related parts: RA110,L103,C129,C130,C131,

Is it sorking? C132,C133,C134,C135,R140,
R141,R142,R143,R145,Q106,
Yes CN2,LCD Module
See 9.2 LCD Does Not Operate.(P.2)
END
*1 Each IC101 has its own MAC address.
When replacing the PCB1, remove the former
MAC address label from the bottom of the unit
and affix the included label which indicates the
new MAC address.
Note:
Refer to waveform (1),(2) and (3) Waveform (P.44) .
18
9.1.4. Table-1: PORT OUTPUT at ERROR

The error result is output to a port of IC501 at error. Check the Test Point ST3,ST2,ST1 and ST0.
See below for the output contents.
Error Test Point

No. Error Item Check Point Related Point.
Code ST3 ST2 ST1 ST0
1 0x0 L L L L NO Power External Power supply See Table-2
• TP5V
• 3.3V Power supply circuit
Internal Power supply
Xtal (X1,X2)
2 0xF H H H H Boot Error BBIC(IC101), Flash(IC103) See Table-3
3 0x2 L L H L Flash Starting Error Flash(IC103) or its peripheral cir- See Table-3
cuit
4 0x4 L H L L IPL Load Error Flash(IC103) or its peripheral cir- See Table-3
cuit
5 0x5 L H L H SDRAM Error SDRAM(IC102) or its peripheral See Table-4
circuit
6 0x6 L H H L DSP Boot Error BBIC(IC101) or its peripheral circuit
7 0xA H L H L - - -
8 0x1 L L L H Flash Data Starting Error Flash(IC103) or its peripheral cir- See Table-3
cuit
9 0x3 L L H H Flash Adjustment Data Adjustment data error (Option)
Option Setting Error
10 0x9 H L L H - - -
11 0xB H L H H L2SW Initialization Error L2SW(IC201) or its peripheral cir- See Table-5
cuit
12 0xC H H L L - - -
13 0x7 L H H H - - -
14 0x7 H H H L Not Error - -
Remarks: H=3.3V, L=0V

S T2
S T3
S T1
I C101 S T0
19
Table-2
No.1 No Power(VCC5V, VDD33V, VDD18V, VDD12V) Error
[Check Points] Measure the voltage at C324. Is it 3.3V?
Measure the voltage at C304. Is it 1.8V?
Measure the voltage at C303. Is it 1.2V?
[Related Parts] 3.3V : C301,C302,C305,C323,C324,C337-C343,L308
1.2V : C303,C310-C322,C325,C331-C336,L309
1.8V : C304,C306,C344
Recheck 9.1.2.(Power Supply)
[Related Circuit] 3.3V VDD3.3V
L308
3.3V 1.8V 1.2V
R309
VDD3.3V
VDD1.8V
IC101
L307 VDD1.2V
Table-3
No. 2,3,4,8 BOOT Error/Flash ROM Data Error
[Check Points] Measure the voltage at C124(Between 3.3V and DGND).
Is it 3.3V?
[Related Parts] IC103,C122-C125,L102,RA111,RA112,R132,R133
[Related Circuit]
IC101
DDRDQ12
D6
DDRDQ13
C7
DDRDQ14
D7 T5 NFLCS0
DDRDQ15 NFLCS0/MEMXA18
3.3V U4 NFLALE
NFLALE/MEMXA17
B6 V5 NFLCLE
DDRDM1 NFLCLE/MEMXA25
NFLRD
L102
A6 T4
DDRDQS1 NFLRD/MEMXA24
A5 U5 NFLWR
DDRDQS1_N NFLWR/MEMXA23
R5 NFLREADY
NFLREADY1/MEMXA22
E16
DDRPADHI
E14
IC103 C4
DDRPADLO
W5 NFLD[0]
DDR_RTT NFLD0/QCLK
1 48 A12 U6 NFLD[1]
NC1 NC29 DDRODT0 NFLD1/QDQ0
2 47 C11 V6 NFLD[2]
3 46 V4 NFLD[3]
NC3 NC27 NFLD3/QDQ2
4 45 C18 T6 NFLD[4]
NC4 NC26 RA111 DDR_REF0 NFLD4/QDQ3
NFLD[7] NFLD[5]
R132
R133
R134
5 44 A11 T7
NC5 I/O7 DDR_REF1 NFLD5/QCS0
6 43 5 4 NFLD[6] A4 W6 NFLD[6]
NC6 I/O6 DDR_REF2 NFLD6/QCS1
NFLREADY 7 42 6 3 NFLD[5] R6 NFLD[7]
R/*B I/O5 NFLD7/MEMXA21
NFLRD 8 41 7 2 NFLD[4] E7
*RE I/O4 VDDIO_DDR1 VDD3.3V
NFLCS0 9 40 8 1 E10
*CE NC25 VDDIO_DDR2
10 39 F5
NC7 NC24 VDDIO_DDR3
11 38 F6
NC8 NC23 VDDIO_DDR4
C136
C137
12 37 F7 N8
C122 VCC1 VCC2 VDDIO_DDR5 VDDIO_NFLQSPI
C123 13 36 C124 F8
VSS1 VSS2 C125 VDDIO_DDR6
14 35 F9
NC9 NC22 VDDIO_DDR7
15 34 F10
DGND NC10 NC21 VDDIO_DDR8
NFLCLE 16 33 RA112 G11
CLE NC20 DGND VDDIO_DDR9
NFLALE 17 32 NFLD[3] DGND
ALE I/O3
NFLWR 18 31 5 4 NFLD[2]
*WE I/O2
19 30 6 3 NFLD[1]
*WP I/O1
20 29 7 2 NFLD[0]
NC11 I/O0
21 28 8 1
NC12 NC19
R135
R136
R137
22 27
NC13 NC18
23 26
NC14 NC17
24 25
NC15 NC16
DGND
Note:
Refer to waveform (4) in Waveform (P.44) .
20
Table-4
No. 5 SDRAM Error

[Check Points] Measure the voltage at C113 (Between 3.3V and DGND). Is it 3.3V? ?
Measure the SD_CLK signal at G1 of IC101 or R129. Is it 108MHz?
[Related Parts] IC101,IC102,L101,L104,C107-C109,C113-C117,C136,C137.
RA102-RA109,R124-R130,R162
[Related Circuit]
IC101
D9 M4 XD[0]
*DDRRST MEMXD0/LCDD2
M1 XD[1]
MEMXD1/LCDD3
C10 L4 XD[2]
DDRCS0 MEMXD2/LCDD4
B11 L1 XD[3]
DDRCS1 MEMXD3/LCDD5
A14 M2 XD[4]
*DDRWE MEMXD4/LCDD6
B13 K2 XD[5]
*DDRRAS MEMXD5/LCDD7
B12 K1 XD[6]
*DDRCAS MEMXD6/LCDD10
J2 XD[7]
MEMXD7/LCDD11
D11 H1 XD[8]
DDRBA0 MEMXD8/LCDD12
B14 J1 XD[9]
DDRBA1 MEMXD9/LCDD13
C13 K3 XD[10]
IC102 DDRBA2 MEMXD10/LCDD14
K4 XD[11]
MEMXD11/LCDD15
B15 N1 XD[12]
DDRA0 MEMXD12/LCDD18
XA[0] 23 2 RA106 XD[0] C12 L2 XD[13]
A0 DQ0 8 1 DDRA1 MEMXD13/LCDD19
XA[1] 24 4 XD[1] C14 L3 XD[14]
XA[2] 25 5 XD[2] B16 M3 XD[15]
XA[3] 26 7 XD[3] D13
A3 DQ3 5 4 DDRA4
XA[4] 29 8 RA107 XD[4] C15 J3 R124 DQMBLS[1]
A4 DQ4 8 1 DDRA5 MEMDQMBLS1/EXTINT5
XA[5] 30 10 XD[5] B17 H2 R125 DQMBLS[0]
A5 DQ5 7 2 DDRA6 MEMDQMBLS0/LCDD17
XA[6] 31 11 XD[6] A19
A6 DQ6 6 3 DDRA7 RA102
XA[7] 32 13 XD[7] C16 B1 XA[0]
A7 DQ7 5 4 DDRA8 MEMXA0/LCDD22
XA[8] 33 42 RA108 XD[8] D14 B3 5 4 XA[1]
A8 DQ8 8 1 DDRA9 MEMXA1/LCDD23
XA[9] 34 44 XD[9] B18 A2 7 2 XA[2]
A9 DQ9 7 2 DDRA10 MEMXA2/EXTINT4
XA[10] 22 45 XD[10] D15 A3 6 3 XA[3]
A10/AP DQ10 6 3 DDRA11 MEMXA3/LCDGP0
XA[11] 35 47 XD[11] C17 B2 RA1038 1 XA[4]
A11 DQ11 5 4 3.3V DDRA12 MEMXA4/LCDGP1
XA[12] 36 48 RA109 XD[12] D16 C3 5 4 XA[5]
A12 DQ12 8 1 DDRA13 MEMXA5/LCDGP2
40 50 XD[13] B19 C1 6 3 XA[6]
NC DQ13 7 2 DDRA14 MEMXA6/LCDGP3
51 XD[14] D2 7 2 XA[7]
SD_BA[1] DQ14 MEMXA7/LCDGP4
L101
21 6 3
BA1 53 XD[15] D10 E3 RA104 8 1 XA[8]
SD_BA[0] 20 DQ15 5 4 DDRCKE MEMXA8/LCDGP5
BA0 A13 E2 5 4 XA[9]
DDRCKELP MEMXA9/LCDGP6
SD_CS 19 1 A17 C2 6 3 XA[10]
*CS VDD1 DDRCLK0 MEMXA10/LCDGP7
SD_RAS 18 14 A18 F3 7 2 XA[11]
*RAS VDD2 DDRCLK0_N MEMXA11/LCDGP8
SD_CAS 17 27 A15 G2 R1268 1 XA[12]
*CAS VDD3 DDRCLK1 MEMXA12/EXTINT14
SD_WE 16 A16
*WE DDRCLK1_N
C107
C108
C109
C110
C111
C112
C113
3
VDDQ1 D1 R127 SD_BA[0] VDD3.3V
DQMBLS[0] 15 9 MEMXA13_BA0/LCDD1
LDQM VDDQ2 A7 D3 R1281 SD_BA[1]
DQMBLS[1] 39 43 DDRDQ0 MEMXA14_BA1/LCDD8
UDQM VDDQ3 B7 F4
49 DGND DDRDQ1 MEMXA15 VDD3.3V
SD_CLK 38 VDDQ4 B8 D4 GPIO4 R175
CLK DDRDQ2 MEMXA16
SD_CKE 37 28 C8
CKE VSS1 DDRDQ3 L104
R162
41 B9 G1 R129 SD_CLK
VSS2 DDRDQ4 MEMCLK
54 A10 F1 R130 SD_CKE
VSS3 DDRDQ5 MEMCKE/EXTINT13
C9 SD_CKE
DDRDQ6 RA105
C114
C115
C116
C117
6
C118
C119
C120
C121
VSSQ1 B10 F2 2 7 SD_CAS

12 DDRDQ7 MEMXA19_MEMCAS/LCDD9
VSSQ2 SD_RAS
R131
E1 3 6
46 MEMXA20_MEMRAS/LCDD16 VDD3.3V
VSSQ3 D8 J4 1 8 SD_WE
52 DDRDM0 MEMWR
VSSQ4 A9 E4 R174
DDRDQS0 MEMRD
A8 GPIO5
DGND DDRDQS0_N
G3 DGND
DGND MEMCS0/LCDD0 R139
B4 G4
DDRDQ8 MEMCS1/LPCLK RA105
D5 H3 4 5 SD_CS
DDRDQ9 MEMCS2/EXTINT6
C5 H4
DDRDQ10 MEMCS3/EXTINT7
B5 PHY_INT002:2D
DDRDQ11
DDRDQ12
D6
DDRDQ13
C7
DDRDQ14
D7 T5 NFLCS0
DDRDQ15 NFLCS0/MEMXA18
U4 NFLALE
NFLALE/MEMXA17
B6 V5 NFLCLE
DDRDM1 NFLCLE/MEMXA25
A6 T4 NFLRD
A5 U5 NFLWR
DDRDQS1_N NFLWR/MEMXA23
R5 NFLREADY
NFLREADY1/MEMXA22
E16
DDRPADHI
E14
DDRPADLO
C4 W5 NFLD[0]
DDR_RTT NFLD0/QCLK
A12 U6 NFLD[1]
DDRODT0 NFLD1/QDQ0
C11 V6 NFLD[2]
DDRODT1 NFLD2/QDQ1
V4 NFLD[3]
NFLD3/QDQ2
C18 T6 NFLD[4]
DDR_REF0 NFLD4/QDQ3
A11 T7 NFLD[5]
DDR_REF1 NFLD5/QCS0
A4 W6 NFLD[6]
DDR_REF2 NFLD6/QCS1
R6 NFLD[7]
NFLD7/MEMXA21
E7
VDDIO_DDR1 VDD3.3V
E10
VDDIO_DDR2
F5
VDDIO_DDR3
F6
VDDIO_DDR4
C136
C137
F7 N8
VDDIO_DDR5 VDDIO_NFLQSPI
F8
VDDIO_DDR6
F9
VDDIO_DDR7
F10
VDDIO_DDR8
G11
VDDIO_DDR9
DGND
Note:
Refer to waveform (5) in Waveform (P.44) .
21
Table-5
No. 11 L2SW initialization Error
[Check Points] Measure the voltage at C215 (Between L2SW_3.3V and DGND). Is it 3.3V?
Measure the voltage at C224 (Between L2SW_1.8V and DGND). Is It 1.8V?
Measure the 25MOUT signal at Pin G19 of IC101 or R108. Is it 25MHz?.
Measure the TXCLK signal at Pin 23 of IC201 or R214. Is it 25MHz?
Measure the RXCLK signal at Pin 30 of IC201 or R220. Is it 25MHz?
For details to 9.5.1 PHY Data Error. (P.26)
[Related Parts] IC101,IC201,L105,L201,L202,L204,L205.
C214-C218,C273,C222-C226,RA101,RA201,RA202,
R101-R104,R108,R213-R220,R242-R243,R230-R232,R244
[Related Circuit]
IC101 L105 R108 25MOUT
L2SW_3.3V
E_TXER
E_TXEN
E_TXCLK
E_TXD[0]
E_TXD[1]
E_TXD[2]
E_TXD[3]
RA101
E_TXD[3]
E_TXD[2]
R214
E_TXD[1]
E_TXD[0] L2SW_1.8V
L204
R103 E_TXEN
R104 E_TXER
E_TXCLK
24
23
VDDIO1 22
GND1 21
SMTXD30 20
SMTXD31 19
SMTXD32 18
SMTXD33/EN_REFCLKO_3 17
SMTXEN3 16
X2 15
X1 14
NC 13
E_RXDV R215
SMTXER3/MII_LINK_3
SMTXC3/REFCLKI_3
E_RXD[3] RA201 1 8 25 SMRXDV3 TXP2 12

E_RXD[2] 2 7 26 SMRXD33/REFCLKO_3 TXM2 11
E_RXD[1] 3 6 27 SMRXD32 AGND 10
E_RXD[0] 4 5 28 SMRXD31 RXP2 9
E_RXCLK R220 L205 29 SMRXD30 RXM2 8
30 SMRXC3 VDDA_1.8 7
R213
1 8 31 GND2 ISET 6
E_COL 2 7 32 VDDC VDDA_3.3 5

E_CRS 3 6 RA202 33 SCOL3 IC201 TXP1 4
PHY_INT 34 SCRS3 TXM1 3

E_MDCLK 4 5 35 *INTRN RXP1 2
36 SCL_MDC RXM1 1
37 SDA_MDIO
40 VDDIO2
43 P1LED1
44 P1LED0
45 P2LED1
46 P2LED0
42 VDDCO
39 *SPISN
48 FXSD1
47 *RSTN
38 SPIQ
41 GND
R216
R101 E_MDIO
R102 E_RST
R217
R218
R219
R242
R243
R230
R231
R232
R244
C214
1.8V
DGND
1.8V L2SW_1.8V
3.3V L2SW_3.3V
L202
L201
C223
C225
C226
C228
C227
C216
C217
C218
C273
C220
C221
C222
C224
C215
C219
DGND DGND
22
9.2. LCD Does Not Operate

Measure the voltage at Pin 6 of CN2. No Related parts: CN2

Is it 3.3V? Or see 9.1. NO OPERATION. (P.16)
Yes
Measure the voltage between Pin 11 and Pin 14 No

of CN2. Related parts: C130, C131, C132, C133
Is it about 4.5V.
Yes
Confirm the waveform SCLK at Pin 5 of CN2. No

Related parts: L103, RA110
See the communication wavefome(3).
Yes
Confirm the waveform at Pin 2, 3, 4 and 6 of CN2. No

Related parts: RA110
See the communication waveform (4).
Yes
Confirm the LCD display. No

Related parts: CN2, LCD Module
Is it working?
Yes
END
Note:
Refer to waveform (6) in Waveform (P.44)
23
9.3. Handset Does Not work

9.3.1. Receive
Confirm the Handset communication. No Related parts: Jack of Handset (BRW and YE),
Can it hear any sound from handset speaker? L305, L306
Yes
Confirm the Handset communication. No

Related parts: Handset, Curl cord
Can it hear any sound from handset speaker?
Yes
END
9.3.2. Send

Related parts: Jack of Handset(BK and RED),

Confirm the Handset Communication.
No L310, L311, R313, R314, C351,
Can it hear any sound from handset microphone?
C352, R311, R312
Yes
Confirm the Handset Communication. No

Related parts: Handset, Curl cord
Can it hear any sound from handset microphone?
Yes
END
24
9.4. Speaker-Phone Does Not Work

9.4.1. Receive
Confirm the waveform between TP CL-SPP and No

Related parts: L301, L302, R329, R330, C375,
TP CL-SPM. Is there any output waveform? C376
Yes
Confirm the Speakerphone communication. No

Related parts: Speaker, Speaker-cable
Can it hear any sound from speakerphone speaker?
Yes
END
9.4.2. Send
Measure the voltage at C369. No
(Between MICBIAS and AGND). Related parts: R324
Is it 3.3V?
Yes
Confirm the Speakerphone communication. No Related parts: R320, R321, R322, R323, R325,
Can it hear any sound from speakerphone
R326, R327, R328, C365, C366
microphone?
Yes
Confirm the Speakerphone communication. No

Can it hear any sound from speakerphone Related parts: Microphone, Microphone-cable
microphone?
Yes
END
25
9.5. Ethernet Does Not work

9.5.1. PHY Data Error

Check the TEST POINT(ST0-ST3). No PHY(IC401) is working.
See Table-1. (P.19) See 9.5.2 LAN port (P.2) or
L2SW initialization Error (No.11) ? 9.5.3 PC port. (P.2)
Yes
Measure the voltage at Pin5 and Pin22 of IC201. No

Related parts: L201, L308
Is it 3.3V?
Yes
Measure the voltage at Pin7 and Pin32 of IC201. No

Related parts: L202
Is it 1.8V?
Yes
Measure the 25MOUT signal at Pin14 of IC201. No Related parts: X1, C101, C102, R108, R110,
Is it 25MHz? R111, L105, IC101
See the communication waveform(2).
Yes
Confirm the waveform between Pin36 and Pin37 of IC201. No Related parts: IC101, IC201, R101, R102, R217,
See the communication waveform (7). R218, RA202
Yes
Confirm the waveform Pin23 and Pin30 of IC201. No

Related parts: R214, R220, L204, L205, IC201
Yes
No
Confirm the waveform Pin26 and Pin29 of IC201. Related parts: IC201, RA201
Yes
Confirm the waveform from Pin17 to 20 of IC201 No

when sending a packet. Related parts: IC201, RA101
Yes
Recheck the TEST POINT(ST0-ST3). No

See Table-1. (P.19) Related parts: IC201
Is it L2SW initialization Error (No.11)?
Yes
END
Note:
Refer to waveform (2), (8), (9) and (10) in Waveform (P.44), (P.45).
Connect LAN cables to SwitchingHUB.
26
9.5.2. LAN port

Confirm the waveform between LAN1 ans LAN2 land. Related parts: T2,L203,R203,R204,R209,R210,
No R211,R212,C209,C210,C255,
Confirm the waveform between LAN3 ans LAN4 land.
See the communication waveform (11)or(12). C256,C202,Flat cable,JK2,R403,
R404
Yes
END
Note:
Refer to waveform (11) and (12) in Waveform (P.45).
9.5.3. PC port

Confirm the waveform between PC1 ans PC2 land. Related parts: T1,L203,R201,R202,R205,R206,
No
Confirm the waveform between PC3 ans PC4 land. R207,R208,C207,C209,C201,
See the communication waveform (13)or(14). Flat cable,JK2,R401,R402
Yes
END
Note:
Refer to waveform (13) and (14) in Waveform (P.45).
27
9.6. LED Does Not Light

No Related parts: IC101,L401,LED406,Q105,

Does SP-PHONE_LED light?
R171,R155
Yes
Does RINGER LED(RED) light? No Related parts: IC101,LED407,Q105,R172,R156
Yes
No Related parts: IC101,L401,LED405,Q104,R170,

Does MUTE LED (RED) light?
R154
Yes
Does FF1 LED (Function) light? No Related parts: IC101,L401,LED401,Q101,R163,

R164,R147,R148
Yes
END
28
10 Disassembly and Assembly Instructions

10.1. Remove Main Board and Ope Board
1. Remove the Stand.
2. Remove 5 Screws (A).

3. Remove the Lower Cabinet.

5. Remove the Main Board.
29

7. Remove the Ope Board.
10.2. Remove and Assembly for LCD

Please note the tab when LCD is resolved and assembled.
30
10.3. Assembly for Lead wire

Perform this process in reverse when taking the unit apart.
Stick to between
two ribs
CLAMP
Tape
CLAMP
Stick to below
top sureface of rib
CLAMP
CLAMP
CLAMP
ACETATE TAPE
(Width=10mm,L=20mm)
Push LEAD WIRE to the root and there is no deflection.

No protrude WIREs from the yellow line (the rib).
Note:
31
11 Maintenance
11.1. Terminal Guide of the ICs Transistors and Diodes
11.1.1. Main Board
A1
28 25 4
24 5 3
W1 86 8
36 13
A19 27
37 12
1 4 1
W19 2
1 48 1
C2HBBY000150 C3ABRY000078 C1CB00003563 C0DBAYY01648 C0EBH0000445
5 Cathode
4
3
1 Anode
B1GFCFEN0011 PSVTUMG11NTR DZ2J056M0L

PSVTUMG2NTR
11.1.2. Operation Board
Cathode
Anode
Anode Anode
Anode
Cathode
Cathode Cathode
B3AGB0000050 B3ABB0000294 B3AAB0000316 B3AAB0000347
11.1.3. PoE Board
87
11 65
Cathode
20
10 Cathode
1
1 23 Anode
4 Anode
C1CB00003680 B1CFNM000001 B0EDER000009 B0BC06800004 DB2X41400L

B0JCML000007
32
11.2. How To Replace a Flat Package IC

Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a sol-
dering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.
11.2.1. Preparation 11.2.3. Procedure

• PbF (: Pb free) Solder 1. Tack the flat pack IC to the PCB by temporarily soldering
• Soldering Iron two diagonally opposite pins in the correct positions on
Tip Temperature of 700F ± 20F (370C ± 10C) the PCB.
Note: We recommend a 30 to 40 Watt soldering iron. An
expert may be able to use a 60 to 80 Watt iron where some-
one with less experience could overheat and damage the
PCB foil.
• Flux
Recommended Flux: Specific Gravity  0.82.
Type  RMA (lower residue, non-cleaning type)
Note: See About Lead Free Solder (PbF: Pb free) (P.4).
11.2.2. Removal Procedure Be certain each pin is located over the correct pad on the PCB.
1. Put plenty of solder on the IC pins so that the pins can be 2. Apply flux to all of the pins on the IC.
completely covered.
Note:
If the IC pins are not soldered enough, you may give
pressure to the P.C. board when cutting the pins with
a cutter.
3. Being careful to not unsolder the tack points, slide the sol-
dering iron along the tips of the pins while feeding enough
solder to the tip so that it flows under the pins as they are
heated.
2. Make a few cuts into the joint (between the IC and its
pins) first and then cut off the pins thoroughly.
11.2.4. Removing Solder From Between

Pins
3. While the solder melts, remove it together with the IC 1. Add a small amount of solder to the bridged pins.
pins. 2. With a hot iron, use a sweeping motion along the flat part
of the pin to draw the solder from between the adjacent
pads.
When you attach a new IC to the board, remove all solder

left on the land with some tools like a soldering wire. If some
solder is left at the joint on the board, the new IC will not be
attached properly.
33
12 Schematic DiagramLOcation
12.1. Main No.1
2 3 4
IC101
D9 *DDRRST M4 XD[0]
MEMXD0/LCDD2
M1 XD[1]
MEMXD1/LCDD3
C10 L4 XD[2]
DDRCS0 MEMXD2/LCDD4
B11 L1 XD[3]
DDRCS1 MEMXD3/LCDD5
A14 M2 XD[4]
*DDRWE MEMXD4/LCDD6
B13 K2 XD[5]
*DDRRAS MEMXD5/LCDD7
B12 K1 XD[6]
*DDRCAS MEMXD6/LCDD10
J2 XD[7]
MEMXD7/LCDD11
D11 DDRBA0 H1 XD[8]
MEMXD8/LCDD12
B14 DDRBA1 J1 XD[9]
MEMXD9/LCDD13
C13 DDRBA2 K3 XD[10]
IC102 MEMXD10/LCDD14
MEMXD11/LCDD15 K4 XD[11]
B15 N1 XD[12]
DDRA0 MEMXD12/LCDD18
XA[0] 23 2 RA106 100 XD[0] C12 L2 XD[13]
A0 DQ0 DDRA1 MEMXD13/LCDD19
XA[1] 24 4 8 1 XD[1] C14 L3 XD[14]
XA[2] 25 5 7 2 XD[2] B16 M3 XD[15]
B XA[3] 26 A3 DQ3 7 6 3 XD[3] D13 DDRA4
R124
100
XA[4] RA107 5 4 100 XD[4] C15 DQMBLS[1]
29 A4 DQ4 8 DDRA5 MEMDQMBLS1/EXTINT5 J3
XA[5] 8 1 XD[5] B17 DQMBLS[0]
30 A5 DQ5 10 DDRA6 MEMDQMBLS0/LCDD17 H2 R125 100
XA[6] 31 11 7 2 XD[6] A19
A6 DQ6 DDRA7 RA102 33
XA[7] 6 3 XD[7] C16 XA[0]
32 A7 DQ7 13 DDRA8 MEMXA0/LCDD22 B1
XA[8] RA108 5 4 100 XD[8] D14 5 4 XA[1]
33 A8 DQ8 42 DDRA9 MEMXA1/LCDD23 B3
XA[9] 8 1 XD[9] B18 7 2 XA[2]
34 A9 DQ9 44 DDRA10 MEMXA2/EXTINT4 A2
XA[10] 7 2 XD[10] D15 6 3 XA[3]
22 A10/AP DQ10 45 DDRA11 MEMXA3/LCDGP0 A3
XA[11] 35 47 6 3 XD[11] C17 B2 8 1 RA103 XA[4]
A11 DQ11 3.3V DDRA12 MEMXA4/LCDGP1
XA[12] 36 48 RA109 5 4 100 XD[12] D16 C3 5 4 33 XA[5]
A12 DQ12 DDRA13 MEMXA5/LCDGP2
40 50 8 1 XD[13] B19 C1 6 3 XA[6]
NC DQ13 DDRA14 MEMXA6/LCDGP3
7 2 XD[14] 7 2 XA[7]
L101
SD_BA[1] 21 BA1 DQ14 51 MEMXA7/LCDGP4 D2

6 3 XD[15] D10 8 1 RA104 XA[8]
53 MEMXA8/LCDGP5 E3
(5) SD_BA[0]
SD_CS
20 BA0
19 *CS
DQ15
VDD1 1
5 4 A13
A17
DDRCKE
DDRCKELP
DDRCLK0
MEMXA9/LCDGP6 E2
MEMXA10/LCDGP7 C2
5
6
4 33
3
XA[9]
XA[10]
SD_RAS 18 *RAS A18 7 2 XA[11]
VDD2 14 DDRCLK0_N MEMXA11/LCDGP8 F3
6.3
C113 22u
C107 0.1u
C108 0.1u
C109 0.1u
C110 NC
C111 NC
C112 NC
SD_CAS 17 *CAS A15 G2 8 1 R126 XA[12]

VDD3 27 DDRCLK1 MEMXA12/EXTINT14
SD_WE 16 *WE A16 100
DDRCLK1_N
VDDQ1 3 SD_BA[0]
DQMBLS[0] 15 LDQM MEMXA13_BA0/LCDD1 D1 R127 100 VDD3.3V
VDDQ2 9 A7 R128 100 SD_BA[1]
DQMBLS[1] 39 UDQM DDRDQ0 MEMXA14_BA1/LCDD8 D3
VDDQ3 43 B7 DDRDQ1 MEMXA15 F4 VDD3.3V
SD_CLK VDDQ4 49 DGND B8 GPIO4 R175 NC
38 CLK DDRDQ2 MEMXA16 D4
SD_CKE 37 CKE C8
VSS1 28 L104
R162
DDRDQ3
0.1u
0.1u
0.1u
0.1u
4.7k
R129 SD_CLK
NC
NC
NC
NC
VSS2 41 B9 DDRDQ4 MEMCLK G1

A10 SD_CKE
VSS3 54 DDRDQ5 MEMCKE/EXTINT13 F1 R130 100 120
C C9 SD_CKE
C114
C115
C116
C117
C118
C119
C120
C121
DDRDQ6 RA105 33
VSSQ1 6 B10 7 SD_CAS
DDRDQ7 MEMXA19_MEMCAS/LCDD9 F2 2
R131
VSSQ2 12 SD_RAS
NC
MEMXA20_MEMRAS/LCDD16 E1 3 6 VDD3.3V
VSSQ3 46 D8 SD_WE
DDRDM0 MEMWR J4 1 8
VSSQ4 52 A9 R174 NC
DDRDQS0 MEMRD E4
DGND A8 DDRDQS0_N GPIO5
DGND
DGND MEMCS0/LCDD0 G3 R139
B4 DDRDQ8 MEMCS1/LPCLK G4 RA105 33
D5 SD_CS 4.7k
DDRDQ9 MEMCS2/EXTINT6 H3
C5 DDRDQ10 MEMCS3/EXTINT7 H4 4 5
B5 PHY_INT 002:2D
DDRDQ11
C6 DDRDQ12
D6 DDRDQ13
C7 DDRDQ14
D7 NFLCS0
DDRDQ15 NFLCS0/MEMXA18 T5
3.3V NFLALE
NFLALE/MEMXA17 U4
B6 NFLCLE
DDRDM1 NFLCLE/MEMXA25 V5
L102
A6 T4 NFLRD
A5 NFLWR
DDRDQS1_N NFLWR/MEMXA23 U5
NFLREADY
NFLREADY1/MEMXA22 R5
(4) IC103
E16
E14
C4
DDRPADHI
DDRPADLO
W5 NFLD[0]
DDR_RTT NFLD0/QCLK
4.7k
4.7k
1 48 A12 U6 NFLD[1]
NC

2 47 C11 V6 NFLD[2]
D 3 NC3 NC27 46 NFLD3/QDQ2 V4 NFLD[3]
4 45 RA111 100 C18 DDR_REF0 T6 NFLD[4]
NC4 NC26 NFLD4/QDQ3
R132
R133
R134
5 44 NFLD[7] A11 DDR_REF1 T7 NFLD[5]

NC5 I/O7 NFLD5/QCS0
6 43 5 4 NFLD[6] A4 DDR_REF2 W6 NFLD[6]
NC6 I/O6 NFLD6/QCS1
NFLREADY 7 42 6 3 NFLD[5] R6 NFLD[7]
R/*B I/O5 NFLD7/MEMXA21
NFLRD 8 41 7 2 NFLD[4] E7
*RE I/O4 VDDIO_DDR1 VDD3.3V
NFLCS0 8 1
C136 0.1u
9 40 E10
C137 0.1u
*CE NC25 VDDIO_DDR2

10 NC7 NC24 39 F5 VDDIO_DDR3
10
10
C122 C123 11 38 C124 C125 F6

NC8 NC23 VDDIO_DDR4
0.1u 100p 12 37 100p 0.1u F7
VCC1 VCC2 VDDIO_DDR5 VDDIO_NFLQSPI N8
10 50 13 36 50 F8
VSS1 VSS2 10 VDDIO_DDR6
NFLCLE DGND 16 33 DGND G11
CLE NC20 VDDIO_DDR9
NFLALE 17 32 NFLD[3] DGND
ALE I/O3
NFLWR 18 31 5 4 NFLD[2]
*WE I/O2
19 30 6 3 NFLD[1]
*WP I/O1
R135 NC
R136 NC
R137 NC
20 29 7 2 NFLD[0]
NC11 I/O0
21 28 8 1
NC12 NC19
22 NC13 NC18 27 RA112 100
23 NC14 NC17 26
24 NC15 NC16 25
DGND
E
USB Port for Testmode
R159 33 USBP USB_P

001:8C USB1P
R160 33 USBN USB_N
001:8B USB1N
R161 100 USBV USB_V
001:8B USB1VBUS
C138 1u
C139 1u
USBG USB_G
DGND DGND DGND
KX-NT511PX/PSX MAIN BOARD No.1 1/2
34
5 6 7 8
CN1
KEY_OUT[0] 1
C140
KEY_OUT[1] 220p 2
C141
KEY_OUT[2] 220p 3
C142
KEY_OUT[3] 220p 4
C143
IC101 Q101
KEY_OUT[4] 220p
C144
5
5 KEY_IN[0] 220p 6
R101 100 N4 MDC U9 KEY_OUT[0] 1
002:1C E_MDCLK KEY_COL0
B 002:1C E_MDIO
R102 100 R4 MDIO KEY_COL1 T9 KEY_OUT[1] R163 2
KEY_IN[1] DGND 7
W9 KEY_OUT[2]
KEY_COL2 4.7k KEY_IN[2] 8
T3 V9 KEY_OUT[3] 3
002:4A E_COL MIICOL/U2RX KEY_COL3 4
R2 T10 KEY_OUT[4] R164 KEY_IN[3] 9
002:3A E_RXDV MIICRS_DV/RGMIIRX_CTL KEY_COL4
002:3A E_TXCLK T2 MIIREFCK/RGMIITXC KEY_COL5 R10 FF1_R KEY_IN[4]
4.7k Q102 10
002:3A E_RXCLK R1 MIIRXCK/RGMIIRXC KEY_COL6 P7 FF1_G 5 KEY_IN[5]
RA101 KEY_COL7/SPI2CS W7 FF2_R 1 11
8 1 U2 T8 KEY_IN[0] R165
002:3A E_TXD[2] MIITXD0/RGMIITD0 KEY_ROW0 2 R147 820 LED[0] 12
7 2 U1 U8 KEY_IN[1]
002:3A E_TXD[3] MIITXD1/RGMIITD1 KEY_ROW1 4.7k
6 3 V2 W8 KEY_IN[2] 3 R148 180 LED[1] 13
002:3A E_TXD[0] MIITXD2/RGMIITD2 KEY_ROW2 4
5 4 V1 R9 KEY_IN[3] R166
002:3A E_TXD[1] MIITXD3/RGMIITD3 KEY_ROW3 R149 820 LED[2] 14
V8 KEY_IN[4]
100 R103 KEY_ROW4 4.7k Q103
100 T1 V10 HOOK KEY_IN[5] R150 180 LED[3] 15
002:3A E_TXEN MIITXEN/RGMIITX_CTL KEY_ROW5 5
002:3A E_TXER R104 100 N3 MII_TXER/SPI1CS1 KEY_ROW6/IIC2SCL U10 FF2_G 1 R151 820 LED[4] 16
KEY_ROW7/IIC2SDA P10 FF3_R R167 2 R152 180
002:3A E_RXD[0] R3 MIIRXD0/RGMIIRD0 KEY_ROW8 P9 ICM LED[5] 17
P1 P8 4.7k 3
002:3A E_RXD[1] MIIRXD1/RGMIIRD1 KEY_ROW9 MUTE 4 R153 150 18
P3 LED[6]
002:3A E_RXD[2] MIIRXD2/RGMIIRD2 R168
P2 VDD3.3V R154 1.5k LED[7] 19
002:3A E_RXD[3] MIIRXD3/RGMIIRD3 R114 4.7k 4.7k Q104
USB1ID P5 R155 1.5k 20
5 LED[8]
002:1C E_RST N2 MIIRXER/EXTINT12 USB2N W1 USB2N 1
002:4A E_CRS P4 MIIRXCRS/U2TX USB2P W2 USB2P R169 21
2
VDD 3.3V USB1VBUS P6 USB1VBUS R146 22
L5 N6 R115 47k 1 4.7k 3
VDDIO_RGMII USB1VRES 001:2F 4 3.3V 0
VDDA_USB1 N5 VDD R170 C127
0:50MHz R138 C128
C 1:25MHz 4.7k U7 EXTINT0/IIC1SDA VDDL_USB1 M6 1.2V DGND
4.7k Q105
0.1u
NC
R8 U11 FF3_G 10
EXTINT1/IIC1SCL EXTINT8/DRV_VBUS 5
R173 NC CL101 V7
(2) 0: CLK_MAIN_CLK R105
1: IF_CLK_PLL
4.7k R7
N11
EXTINT2/CLK_OUT
EXTINT3/CLK_REF_OUT USB1N
DGPIO30 USB1P
U3
V3
USB1N001:2F
USB1P001:2E
R171
1
2
DGND
P12 M5 4.7k 3
DGPIO31 VCC_USB2 4 R156
DGND DGND R172 LED_K
CL102 330
3.3V
E12 E_VDDQ T11 UTX
R106 0
R107 0
ETEST
H14 ETEST
U1TX
U1RX
U1CTS/DIGMIC_DATA
R11
P11 SP-PHONE
RINGER
URX R176 NC NC
DGND
(6) LED_A
CN2
To LCD
F16 TEST U1RTS/DIGMIC_CLK R12 3.3V
25MOUT DGND
DGND RA110
002:1C R108 150 L105 TESTG19 F14 6 3
1 Vss
MAIN_CLK_OUT SPI1CS0
C101 10p E19 XI25M G14 5 4 LCD_A0 2 ResetB
SPI1DI
R109 50 F19 XO25M E15 7 2
SPI1CK LCD_CS
1
3 V0
2
NC X1 J13 OSC25M_VDD12 E17 8 1

R111 VDD SPI1DO
C105 J12 OSC25M_VSS VDD LCD_D0 4 V1
4
25M 1M 1.2V R116 4.7k 100

0.1u D18 3.3V L103 0
DGND C102 12p SPI2CK LCD_CLK
3
GPIO2 5 V2
10 SPI2DI D17
50 R110470 VDD3.3V Boot strap
W3 XI12M C19 6 V3
(3) W4 XO12M
N7 OSC12M_VDD12
SPI2DO
T1SCLK F17
R157
0:NOR FLASH
1: According to C129 C130 2.2u
7 V4
C103 22 p50 VDD C106 M7 OSC12M_VSS F1SYNC E18 GPIO0 8 Vss

DGND 0.1u D19 NC 0.1u
1.2V D1RX LCD_5V C131 2.2u 9 Vdd
X2 R113 10 D1TX F15 GPIO1
D C104 12M G15 R158 C132 2.2u 10 SCL
22p 1M TCK TCK NC
G16 V11 R140 C133 2.2u
50 R112 47 TDI TDI SD_D0 11 SI
H16 W11 2.2k
TDO TDO SD_CMD 5V
H15 TMS W10 DGND 12 CSB
TMS SD_CLK
R120 4.7k
R121 NC
R122 NC
R123 NC
F18 TRST
R117 NC
R118 NC
R119 NC
TRST LCD_RST 13 RS
R141 470k
DGND
R142 18k
R143 C135 0.01u 14 Vss

C134
Q106 33k 2.2u

5
1
2 DGND DGND
Boot strap
3 DGND
DGND 4
Clock out strap
DGND
R145 100
IC101
IF_DATA_AD L15 R144
ST3 G18 RF_RADIO_EN/EXTINT9 IF_DATA_DA K17 NC
ST1 J17 RF_SCLK/SD_D2 IF_EN_AD L14
E H17 RF_SDATA_IN/SD_D3 IF_EN_DA J19
J18 K14 DGND
ST0 RF_SDATA_OUT/SD_D1 IF_INT_ANA
ST2 J16 RF_SEN/SD_WR_PROT IF_MLSE K15
H19 RF_SLOT_CTRL/SD_DETECT IF_NARES K16
H18 RF_TR_DATA/EXTINT10 IF_RX1 J15
GPIO3 G17 EXTINT15/SYNCPORT IF_T_DATA J14
M14
VDDIO_RFAPU
VDD
1.8V
C126
0.1u 10
DGND
35
12.2. Main No.2

2 3 4
(10)
3.3V L2SW_3.3V
A L201
25MOUT001:4C
C216 0.1u
C217 0.1u
C218 0.1u
C273 0.1u
22u
C219 NC
C220 NC
C221 NC
10
10
10
10
50
50
C215
L2SW_3.3V
E_TXER
E_TXCLK
E_TXD[0]
E_TXD[1]
E_TXD[2]
E_TXD[3]
E_TXEN
DGND
(8) (1)
R214
270
L2SW_1.8V
L204
1.8V L2SW_1.8V (9) SMTXER3/MII_LINK_3
SMTXC3/REFCLKI_3
L202
C223 0.1u
C225 0.1u
C226 0.1u
C222 10u
C227 NC
C228 NC
24
23
22
21
20
19
18
17
16
15
14
13
C224 10u
10
10
10
10
10
50
VDDIO1
GND1
SMTXD30
SMTXD31
SMTXD32
SMTXD33/EN_REFCLKO_3
SMTXEN3
X2
X1
NC
B E_RXDV R215 100
(2)
E_RXD[3] 1 8 RA201 25 SMRXDV3 TXP2 12
26 SMRXD33/REFCLKO_3 TXM2 11 (3)
DGND E_RXD[2] 2 7 100
E_RXD[1] 3 6 27 SMRXD32 AGND 10
28 SMRXD31 RXP2 (4)
E_RXD[0] 4 5 9
E_RXCLK R220 L205 29 SMRXD30 RXM2 8 (5)
270 30 SMRXC3 VDDA_1.8 7 R213
1 8 31 GND2 IC201 ISET 6 11.8k
E_COL 2 7 32 VDDC VDDA_3.3 5 (6)
E_CRS 3 6 RA202 33 SCOL3 TXP1 4
(7)
PHY_INT 100 34 SCRS3 TXM1 3
(8)
E_MDCLK 4 5 35 *INTRN RXP1 2
SDA_MDIO
E_COL 36 SCL_MDC RXM1 1 (9)
P2LED0
VDDIO2
P1LED1
P1LED0
P2LED1
VDDCO
001:5B E_COL
4.7k
*SPISN
FXSD1
*RSTN
E_CRS
SPIQ
GND
001:5C E_CRS
E_RXD[3]
R216
001:5C E_RXD[3]
46
47
48
37
38
39
40
41
42
43
44
45
E_RXD[2]
001:5C E_RXD[2]
C214 0.01u
4.7k
R244 4.7k
E_RXD[1]
100
10k
R232 10k
10k
10k
10k
10k
001:5C E_RXD[1]
E_RXD[0]
001:5C E_RXD[0]
R217
R218
R219
R242
R243
R230
R231
E_RXDV
001:5B E_RXDV
(7)
1.8V
E_RXCLK
001:5B E_RXCLK
E_TXEN
001:5C E_TXEN
C E_TXD[3]
001:5B E_TXD[3]
E_TXD[2]
001:5B E_TXD[2]
E_TXD[1] DGND
001:5B E_TXD[1]
E_TXD[0]
001:5B E_TXD[0]
E_TXER
001:5C E_TXER
E_TXCLK
001:5B E_TXCLK
E_MDCLK
001:5B E_MDCLK
E_MDIO
001:5B E_MDIO
E_MDIO
E_RST
E_RST
001:5C E_RST
001:4C PHY_INT PHY_INT
E_RXD[0]
E_RXD[1]
E_RXD[2]
E_RXD[3]
E_TXD[0]
E_TXD[1]
E_TXD[2]
E_TXD[3]
NC
NC
NC
NC
NC
NC
NC
NC
C257
C258
C259
C260
C261
C262
C263
C264
D
DGND
LCD_5V
R241
(10)
270
C240 0.1u C239 C236 D211

10 0.01u 10u 5.62
C242 0.1u 16 10
10
C244 0.1u
10 DGND DGND
3.3V AVCC3.3V
C246 0.1u
10 3.3V
C265 0.1u C269 0.1u C248 0.1u
10 10 10 IC202
C266 0.1u C270 0.1u C250 0.1u 3.3V L211 10u
R239 3 SW
10 10 10 V IN 2
0 R238
E C267 0.1u C271 0.1u C252 0.1u 0 COMP 6 R234
10 10 10 1 BOOT SS 8 100k
C238 C237 C235 R236 5 FB
C268 0.1u C272 0.1u C254 0.1u C251
10 EN 7
NC 22u 22u 47k1 0.1u
10 10 10 GND2 GND1 C253 C243 C245 C241
6.3 6.3 9 4 0.1u
AVCC 22u 0.01u 10u
DGND 16 16 16 16
AGND AGND DGND 3.3V C247
3300p C249
R237 0.1u
DGND DGND R235 16
R240 0 15k 1
12k
DGND DGND
36
5 6 7 8
L203
(1)
(13)
C211
C212
330p
C213
NC
22u
DGND DGND C203

PC_TXP 16
1000p
D201 R205 12 5 TX1P
NC 49.9 DGND 13 4 PC1
4 1
10
L206
C207
(2) PC_TXP PC_TXM

D202
DGND NC R206
49.9
0.01u50
DGND
9 8
7 3 2
NC
TX1M (14) B
(3) PC_TXM PC2
11 6
RX1P
(4) PC_RXP PC_RXP 15
(5) PC_RXM 4 1 PC3
14 3
D203 R207
NC 49.9 2 L207
16 1 NC RX1M
(6) WAN_TXP C204
16 3 2
(7) WAN_TXM C208 1000p T1 PC4
D204
R201
R202
WAN_RXP R208 0.01u50
75
75
(8) DGND NC
WAN_RXM PC_RXM 49.9
(9) DGND
DGND PCR
PC5
C201
NC
C205
(11)
16
WAN_TXP 1000p
DGND TX2P
D205 R209 DGND 12 5
NC 49.9 LAN1
13 4
4 1
10
L208 C
DGND
WAN_TXM
D206
NC
R210
49.9
C209
0.01u50
DGND
9 8
7 3 2
NC TX2M (12)
LAN2
11 6
RX2P
WAN_RXP 15
LAN3
14 3 4 1
D207 R211
NC 49.9 2 L209
NC RX2M
C206 16 1
16 3 2 LAN4
C210 1000p T2
D208 R212
DGND NC 0.01u50
49.9
WAN_RXM DGND DGND PoE1
PoE2
R203
R204
75
75
0.047u
0.047u
C255
C256
LNR
LAN5
D
1000p
C202
2000
DGND
DCIN
5V
R233 NC
DCP
F1
D210
(10) DC+
4
L2 32V 3A
C230 C229
D209 22u 0.01u L1 DCM
10 16 L210
1
2
C231
NC
PoE DC-
DGND
PoE3
DGND
AGND DGND E
DG1 DG2DG3 DG4
DGND
37
12.3. Main No.3

2 3 4
A
L303
CL-SPP NC
SPP L301 22u R329
C379 NC
0
C375
NC
C373
C377 NC
NC
D305 4.7u L304
10
NC
C378
CL-SPM NC
DGND DGND DGND DGND
SPM L302 22u R330
C380 NC
0
C374
C376
NC
D306 4.7u
10
NC
DGND DGND DGND DGND
MICBIAS
B R315
330
C355 10u 10
R316 AGND
CL-HS_MICP 2.2k R313 C351 R311
HS_MICP L310 220 0.1u 3.3k
10
C391 D301 C357 C353
330p C356 D309 C348 (1)
150p 50 NC 1000p
50 50 (2)
NC NC
CL-HS_MICM
AGND AGND (3)
AGND
HS_MICM AGND L311 R314 C352 R312 AGND
(4)
C392 220 0.1u 3.3k D310
D302 C358 R317 C354 10 (5)
150p 50 NC 1000p
330p 2.2k
50 50 C345
AGND AGNDAGNDAGNDAGNDAGND 0.1u
CL-HS_SPP 10
HS_SPP L305 (6)
AGND (7)
C359 (8)
C361 D303 NC
(9)
C CL-HS_SPM
330p
HS_SPM L306 AGND AGND
C360
D304 NC
MICBIAS
AGND AGND
R310
0
C346 C347
NC 150p 50
AGND AGND
MICBIAS
R324
330
C369 10u 10
D
AGND
R325
CL-MICP 2.2k
R327 R322 C365 R320
MICP 0 220 0.1u 3.3k
50
10
C371
330p
C367 C363
D307 1000p NC
AGND AGND C370 AGND AGND C362

NC NC
CL-MICM
R323
MICM R328 0 220
R326 C366 R321
C372 C368 0.1u 3.3k C364
330p 2.2k 1000p 10 NC
D308
50 50
AGND AGND AGND AGND AGND
MICBIAS
C387
NC
C388
NC
C389
NC
C390
NC
AGND
38
4 5 6 7
VDD3.3V 3.3V
L308
VDD3.3V
VDD3.3V
VDD1.2V
R309
0
10
CL_VDD1.2V
C301 0.1u
C323 0.22u
10
C302 1u
C324 1u
10
10
3.3V_DCLS IC101
U16 U14 C303 B
VCC5V_DCLS0 VCC5V_DCDC 22u
VDD1.2V U17 W15 L307
VCC5V_DCLS1 DCDC_VRP 6.3
T15 T14 6.8u
SINK_DCLS0 DCDC_VSENS
T16 SINK_DCLS1 COIL_DCDC V14 DGND
V16 VCC33SW_DCLS SINK_DCDC W14
C325 R307 0 W17 W13
0.22u VDDSW_DCLS GND_DCDC VDD3.3V
R15 VDD12_DCLS C30410 DGND
10 R308 0 U15 DGND
VDD18_DCLS VDD18_DCDC V15 0.1u
VDD1.8V
DGND VCC33_DCDC W16
(1) DGND V19 0.22u
(2) V18 PAOUTN C30510 CL_VDD1.8V
C381 100p N13 DGND
AGND VDD_ANA
(3) 50 M18 1u
DIFFIN0P AVCC3.3V
(4) M17 DIFFIN0N C306 10
C382 100p V17 AGND
AGND VCC_ANA0
(5) 50 P15 W12
MICPWR0 VCC_ANA1
C308
C309
0.22u
10
P16 SINGIN1 VCCA N16 C307
0.22u
N15 SINGIN0 R301 10 10u
C383 100p N14 AGND 6.3
AGND MICPWR1 EXT_REG_CTL T13
(6) 50 L19 U13 EXTREGCTL
DIFFIN1P PWM0 AGND
(7) M19 DIFFIN1N LEDSINK1_PWM1 V13
C384 100p R14
AGND LEDSINK2
(8) 50 K18
AMPOUT0
K19 AMPOUT1 DCIN0 R19
(9)
AVCC 3.3V
L17 AMPOUT2 DCIN1 U19 C
L18 AMPOUT3 DCIN2 P17
M15 VCC_AMP_OUT DCIN3 W19
M16 GND_AMP_OUT DCINS U12
C385 C386 CL301
10u R13 FORCEMUTE GNDI T19
0.1u R303 N17
6.3 10 GNDA
10k T17 TPX1 VSS1 R16 DGND
VDD3.3V DGND P13 TPX2 VSS2 R17
5V
AGND
(1) R18
T18
P18
TPY1
TPY2
TPS
VSS3
VSS4
U18
W18
AGND
VDD 1.2V
R305
IC301 XI13M N18
4.7k
R306 PWR_RST XO13M P19
1 VSS 4 V12 RSTN BCLK N19
L309
OUT 0 T12 TEST_ANA
DGND 2 VDD 3 C328 R304 TEST_ANA L16 IF_CLK_IF
CD 100p 0 P14 VREF
C326 C327 50 C329 C330 PLL1_AVDD F13
0.1u 0.01u 10u
DGND 0.1u 10 C310 C311
VDD 1.2V 6.3 D12 VDD0 C312
220p 0.1u
DGND E5 VDD1 PLL1_AVSS F12 22u
10
AGND E6 VDD2 DGND 6.3

DGND E8 VDD3 PLL1_DVDD E13
0.1u
0.1u
0.1u
0.1u
0.1u
6.3
22u
H5 VDD4 C313 C314 DGND

K13 VDD5 220p 0.1u
DGND D
C332
C333
C334
C335
C336
C331
K5 VDD6 PLL2_AVDD F11

M10 VDD7 C315 C316
M8 VDD8 220p 0.1u
N12 VDD9 PLL2_AVSS G12
DGND VDD 3.3V DGND
PLL2_DVDD E11
0.1u 10
G5 C317 C318
VDDIO0
H6 220p 0.1u
0.1u
0.1u
0.1u
0.1u
0.1u
VDDIO1
22u
DGND
6.3
J5 VDDIO2 PLL3_AVDD L13

K12 VDDIO3 C319 C320
C338
C339
C340
C341
C342
C343
C337
L6 VDDIO4 220p 0.1u

N10 VDDIO5 PLL3_AVSS H13
VDD DGND
1.8V
PLL3_DVDD G13
DGND
C321 C322
M13 VDDIO_APU GND1 J9 220p 0.1u
GND2 H10
C344 J11
GND3
0.1u GND4 J8 DGND
10 N9 VDDIOC GND5 K8
GND6 H11
DGND K11
GND7
J7 GND35 GND8 L7
H12 GND34 GND9 H8
G10 GND33 GND10 J6 E
G8 GND32
G6 GND30
K6 GND29
E9 GND28
L8 GND27
J10 GND26
L12 GND25
G9 GND24
M12 GND23
G7 GND22
K7 GND21
M9 GND20
K9 GND19
L11 GND18
M11 GND17
A1 GND16
L10 GND15
L9 GND14
H9 GND13
H7 GND12
K10 GND11
DGND
39
12.4. Ope
2 3 4
JACK PCB OPE_3.3V

(1)
CN11
NC 1
4 1
CN12 2
L402 JK1
1 NC 3 LED[8]
2 3 2 1 4 LED[7]
2
3 5 LED[6]
4 1 3
4 4 6 LED[5]
L403
5
5 NC 7 LED[4]
6
3 2 7 8 LED[3]
B 8
R401 NC 9 LED[2]
NC
R402 NC 10 LED[1]
11 LED[0]
12 KEYIN[5]
13 KEYIN[4]
14 KEYIN[3]
NC 15 KEYIN[2]
4 1
CN13 16 KEYIN[1]
L404 JK2
1 17 KEYIN[0]
NC
2 3 2 1 18 KEYOUT[4]
2
3 19 KEYOUT[3]
4 1 3
4 OPE_3.3V
4 20 KEYOUT[2]
L405
5
5 NC 21 KEYOUT[1]
6
3 2 7 22 KEYOUT[0] R405
8 2.2k
R403 NC SW1
C NC 1
KEYIN[5] 3
R404 NC 2
4
6
5
HOOK SW
LED PCB Chip Jumper

J201 J202
LED-A
J203 J204
LED407
MESSAGE J205 J206
NC NC
LED-K
KX-NT511PX/PSX OPERATION BOARD 1/2
40
4 5 6
OPE_3.3V
L401
(1)
LED404
LED405
LED406
LED401 1 3 LED402 1 3 LED403 1 3
R G R G R G
2 4 2 4 2 4
SP-PHONE
ICM
MUTE
FF1 FF2 FF3
LED[0]
LED[1]
LED[2]
LED[3]
LED[4] B
LED[5]
LED[6]
LED[7]
LED[8]
KEYOUT[4]
KEYOUT[3]
KEYOUT[2]
KEYOUT[1]
KEYOUT[0]
FF1 FF2 FF3 CONF UP

12 12 12 12 12
KEYIN[4]
C
ICM 1 2 3 DOWN
12 12 12 12 12
KEYIN[3]
FLASH 4 5 6 TRANSFER
12 12 12 12 12
KEYIN[2]
MUTE 7 8 9 HOLD
12 12 12 12 12
KEYIN[1]
REDIAL * 0 # SP-PHONE
12 12 12 12 12
KEYIN[0]
KX-NT511PX/PSX OPERATION BOARD 2/2
41
12.5. PoE
2 3 4
4 (1)
3
(2)
2
1
CN14
D
8V
D408 L418
(3)
TP-8V
10u16
10u 16
10u 16
10u 16
1000p
16
1u25
C417 4.7u
22u
50
R423
D407 D406
1A NC
NC
(15)
C423
25
C421
C425
C422
C420
C419
C418
C416
TP-DGND L417 NC
220u
DGND 8 7 6 5
Q401
4
3 2 1 R416
(4)
C414
150
NC
E R417
(5)
0
R418
0.51
0.5W
(6)
(7)
R420
(8)
0
R421
(9)
820
KX-NT511PX/PSX PoE BOARD 1/2
42
4 5 6 7 8
JACK PCB
4 1
CN12
L402 JK1
1 NC
2 3 2 1 B
2
3 3
4 1
4 4
L403
5
5 NC 6
3 2 7
8
R401 75
R402 75
4 1
CN13
L404 JK2
1 NC
2 3 2 1
2
3 4 1 3
4 4
L405
5 NC
5 C
6
3 2 7
8
C426 R403
100 0.047u 75
C427 R404
100 0.047u 75
(1)
(2)
TP-PoE2 TP-PoE1 TP-PoE5 TP-PoE4

L411
L412
L413
L414
2
3
D401
D402
D
1
4
R414 0
L416 NC
(3)
C407 22u
C410 1u
C409 1u
C408 1u
F401
1A
100
100
100
100
J401
NC
D403
0.047u
C401
C406
25 0.033u L415
2 3
C402
IC401
R415 15p 50
21
75k 20 1 C403 R411
FREQ TMR 1 4
19 BL FB 2 560p 50 100k 1
18 VBIAS COMP 3 J402
17 MODE SEN 4
16 5 NC
AUX VSS2 NC
(4) 15 GATE SENP 6 R412 NC
14 COM VDD 7 24.9k 1
13 RSN DET 8 R413 953 C404 C405
1000p
E
(5) 12 RSP CLASS 9 100
C413 NC
11 10
C411
RTN VSS1 DGND PoE_G

1u25
C412
0.22u
CLASS 3
PoE_VSS D404
(6)
NC
PoE_G PoE_VSS D405

(7)
R419
1.5k
C415
(8)
0.1u 50
R422
(9)
5.6k
KX-NT511PX/PSX PoE BOARD 2/2
43
12.6. Waveform
12.6.1. No.(1)-(6)
(1) RESET SIGNAL (2) X1 25MHz䠄IC101 pin E19䠅
䐟5V 䐡PWR_RST
䐠3.3V
(3) X2 12MHz䠄IC101 pin W3䠅 (4) NAND Flash(IC103) SIGNAL
䐟R/*B 䐡*WE
䐠*RE 䐢I/O_0
(5) SDRAM CLOCK䠄108MHz䠅 (6) LCD SIGNAL
䐟CS 䐡A0
䐠SCL 䐢SID
44
12.6.2. No.(7)-(14)
(7) MDIO I/F (8) L2SW(IC201) TX,RX CLOCK
IC201 pin23,30 CLOCK 25MHz
䐟E-MDCLK
䐠E-MDIO
(9) L2SW(IC201) RXdata (10) L2SW(IC201) TXdata
䐟E_RXCLK 䐡E_RXD[0] 䐟E_TXCLK 䐡E_TXD[0]

䐠E_RXDV 䐠E_TXER
(11) LAN port TX(100BASE-TX) (12) LAN port RX(100BASE-TX)
Between LAN1 and LAN2 land Between LAN3 and LAN4 land
(13) PC port TX(100BASE-TX) (14) PC port RX(100BASE-TX)
Between PC1 and PC2 land Between PC3 and PC4 land
45
12.6.3. No.(15)
(15) PoE Switching Regulator SIGNAL
Pin 4 of Q301
46
LED_K LED_A
CN1
cam5
pcbmark-1 C270
C140 C268
C267 C119 C115 C141
IC102
CN11C142 C144
C362 28 RA104 L308 L308
C143
C250 C363 C364 27 RA110
R320 R321 RA1 0 3 RA102 RA1 0 4
C246 RA110 R116 R123 R158 R157
13.1. Main Board
C365 C366
RA103 RA102 IC101 ST2
A19
C369 ST3
C131
C130
C132
C133
C367 C368
R145 R126
A1
R322 R323 ST0
C369
ST1
C130 C131 C132 C133 R127 R128
R144
13.1.1. Component View
R324 R325 C370 R326 C101

C387 C371 C372 C134
Q106 RA105
R327 R328
R111 X1
Q106
D307 D308 X1
R143 R141 IC102 C114 C118 R130
C135 R110
RA108
R140 C120 C116
C135
R142 C102
R129 L104
IC101 L105
+ JOINT4 C239 RA107
C383
MICP R241 D211 C236 RA108
R108
D211
R109
R241
R125
C384 C389
RA107RA105
13 Printed Circuit Board
R124
3.0A C109 C112
C231 C121 C117 C381
F1 C231
C236
MICM C382
R301
R103
W19
F1 RA109 RA106
- R301
C229 C230 D209 C307
L210
RA101
C307
DC+
RA101
54
1
W1 R113 R112 C345 C347
R117 R118 R119 C301 C304 C305 R309 C324
R310
+ R233 C103 C104
R233
RA109
47
D210
RA106
EXTREGCTL C309 C330
L210 C323
C211
DC- C346
C329
L203 C272
C346
- R239 R240 X2
D210
L211 C213 C212
C238 C237 C235
X2 C329
C257 C258 C259 C260
C206 L303
L211
C247 L303
R236
C213 C205 C204 C203
pcbmark-2
C375
R237 L301
T2 T1 L301 D305
R235 R238 +
C373
C238
C247 C375 C379
SPP
C237
IC202
C235
R329
PoE3 C249 R234 C378 C377
C251 R330
C253
C374 C376
T2 T1
IC202
DGND L302 C380
SPM
C241 C243 D306 -
R235
PoE2
C245 C243
L304
C241
USB_P
L302
PoE1
C376
USB_N L304 + HS_MICP
USB_V L206
R159 L206
USB_P USB_G L209 L208 PNLB2311ZA-GW L207
L209
L208
L207 HS_MICM
R160
R202
USB_N
2013/10/25 -
R201 R202
C139
R201
R161
USB_V
C138 HS_SPP
C201 +
USB_G
C201
LAN5 LAN4 LAN3 LAN2 LAN1 PC5 PC4 PC3 PC2 PC1
KX-NT511PX/PSX MAIN COMPONENT VIEW

HS_SPM
-
R164 R163 R166 R168 R167 R169 R172 R171
R165
C254
R170
C244
Q101 Q102 Q103 Q104 Q105
C271
C388
DG3 DG3
R148 R147 R150 R149 R152 R151 R154 R153 R156 R155
C266
C128 C127 R146
C337 C337 1 2 3 4 5 6 7 8 9
C312 C331 A B C D E F G H I
L101
R106 R122 R107 R121 L309
C312 C331
13.1.2. Bottom View
R146
Q102
Q103
Q104
Q105
Q101
L101
C322 C311 C314 C318 C316 C113 R S T U V W X Y Z

C332 5V
C321 C310 C313 C317 C315 C333
TCK 5V
C113
TDI TRST GPIO1 GPIO2 GPIO4 R162R131
C222
GPIO0 CL102 C136 GPIO5 R174R175
TDO TEST C338 C223 C222 C269
GPIO3 R139
C335 C137 C339 CN2
ETEST L202 L202 L201
TMS
pcbmark-4
C105 C340 L201 CN2
C320
C319
C342
C336
C334
CL-MICP
C224 C224 C215
C126 1 CL-MICP
C341 C215 1 4 C129
C343 C106
C306 C344
L103
C386 C228 R213 R244
DG1 DG1 CL-MICM
C385
CL301 C218 C221
C325 C226 IC201
TEST_ANA C111 1
C385
CL-MICM
C110
C108 R232
CL101 C107
C308 C302 USB2P
USB2N C214
C264
C248 R120 13 R231
C263
R230 DCP DCP
R3 0 7
3.3V_DCLS R176R138R173R105R115R1 1 4 C262
R243
L307 IC201
C261 R242
48
C216 C219 DCM
R308 DCM
R102 R101 R104 C220 C217 R219
C328 C327
DG4 PWR_RST IC301 37 R218
C303
CL_VDD1.8V L204 PoE
CL_VDD1.8V
DG4 R306 R217
CL_VDD1.2V
IC301 C326 R214 3.3V C265
L307 C303
R305 25 C273
25 IC103 3.3V 24
C252 CL_VDD1.2V
R2 1 5 RA201 L205 C225 C227 RA202 R2 1 6
R303 R304 R132
C208 RA201 RA202 R135

UTX UTX C207 R220
URX
RA112 R136
C207 C2 0 8 C2 0 9 C210 C210
CL-SPP C390 C355
R137
RA112
C355
C209
CL-SPP
R315 C125 C124 IC103 C123 C122
URX
C240 R205 R206 R207 R208 R209 R210 R211 R212
R316 C353 D309
D301
C357 R134
CL-SPM L310 R313 C351 R311 D201 D202 D203 D204 D205 D206 D207 D208 RA111
C356 C348 R133
L311 R314 C352 R312
C358
CL-SPM
CL-HS_MICP D302 L102
R317 C354 D310
C391
CL-HS_MICP L102
R206
R207
R208
RA111
R205
R210
R211
R212
R209
C392 CL-HS_MICM CL-HS_MICM 48 1

TX2M RX2P
TX1P TX1M RX1P RX1M
USBP USBP DG2 DG2
C242 TX2P TX2M RX2P RX2M
RX2M
C359 C360 USBN USBN
TX2P C255 C202 pcbmark-3
D303 L305 L306 D304
R203 C255 LNR C202
PCR USBV
TX1P
C361
RX1P
TX1M
PCR R203 USBV
RX1M
CL-HS_SPP
CL-HS_SPP R204 C256 LNR
CL-HS_SPM R204 USBG USBG
CL-HS_SPM C256
KX-NT511PX/PSX MAIN BOTTOM VIEW

13.2. Operation Board

LED407
J201
J202
pcbmark-1
J203
J204 R405 J202 J201
J203
J204
R405
cam19
L401
CN11
LED407
L401
LCD Cable
CN11
22 1
LED-K
LED401 LED402
LED-A
LED401 LED402
LED403 LED403
FF1 FF2 FF3
REF-1
LED404
cam9
FF1 FF2 FF3
cam18
LED404
ICM 1 2 3 CONF
ICM 1 2 3 CONF
FLASH 4 5 6
FLASH 4 5 6
LED405
LED405
MUTE 7 8 9
UP
MUTE 7 8 9 UP
DOWN
REDIAL * 0 #
DOWN
REDIAL * 0 #
pcbmark-2
LED406
LED406
TRANSFER HOLD SP-PHONE
TRANSFER HOLD SP-PHONE
KX-NT511PX/PSX OPERATION COMPONENT VIEW
49
13.2.2. Bottom View
PNLB2310ZA-IG
SW1 cam16
LCD Cable
SW1
cam20
DIP
cam26
cam21
cam22
PNLB2310ZA-IG
12 3 4 5 6 7 8 9
ABC D E F GH I
cam12
RST UVW XY Z
cam14
cam13
KX-NT511PX/PSX OPERATION BOTTOM VIEW
50
L404 L402
13.3. PoE Board
L405 L403
1 8 5 1 1 8 5 1
D408
4 1 CN13 CN12
D407
CN14
C425 L413 L414
PNLB2315Z -LV
L418
C423
C422
JK1 KX-NT511P
L411
JK2 D401 D402 cam1
C421
C420
C419
C418
cam2
L412
F401
cam8
1.0A
C417 R417
C413 R413
C414
10
11
L415
12 3 4 5 6 7 8 9
Q401 R412
R416
51
R419
ABC DEF GH I cam5
L417 C412 R422
IC401
R411 R421
R418 R420
D406
1
C415 D405 D404 D403
C411
R415 RST UVW XY Z
C402
C403
C416
C406
C401
pcbmark-2 pcbmark-1
C409
C410
C408
R423
C407
R414
L416
KX-NT511PX/PSX PoE BOARD Component View

13.3.2. Bottom View
TP-DGND
TP-PoE1
4
1
TP-8V
TP-PoE2
1
TP-PoE5
C405
TP-PoE4
C404
8
5
R404 R403
C427 C426
1
J401 J402
1
8
R402
5
cam4
R401
pcbmark-4
pcbmark-3
1
KX-NT511PX/PSX PoE BOARD Bottom View
52
14 Appendix Information of Schematic Diagram

Note:
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
1. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
53
15 Exploded View and Replacement Parts List

15.1. IC Data
15.1.1. IC101
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
1 3 5 7 9 11 13 15 17 19
2 4 6 8 10 12 14 16 18
Pin No. Terminal Name I/O Setting Function Remark

A1 GND P GND
A2 MEMXA2_EXTINT4 O_ XA2
A3 MEMXA3_LCDGP0 O_ XA3
A4 DDR_REF2 AI NC
A5 DDRDQS1_N O_ _low NC
A6 DDRDQS1 O_ _low NC
A7 DDRDQ0 O_ _low NC
A8 DDRDQS0_N O_ _low NC
A9 DDRDQS0 O_ _low NC
A10 DDRDQ5 O_ _low NC
A11 DDR_REF1 AI NC
A12 DDRODT0 O_ _low NC
A13 DDRCKELP O_ _low NC
A14 DDRWE_N O_ _low NC
A15 DDRCLK1 O_ _low NC
A16 DDRCLK1_N O_ _low NC
A17 DDRCLK0 O_ _low NC
A18 DDRCLK0_N O_ _low NC
A19 DDRA7 O_ _low NC
B1 MEMXA0_LCDD22 O_ XA0
B2 MEMXA4_LCDGP1 O_ XA4
B3 MEMXA1_LCDD23 O_ XA1
B4 DDRDQ8 O_ _low NC
B6 DDRDM1 O_ _low NC
B11 DDRCS1 O_ _low NC
B12 DDRCAS_N O_ _low NC
B13 DDRRAS_N O_ _low NC
B14 DDRBA1 O_ _low NC
B15 DDRA0 O_ _low NC
54

C1 MEMXA6_LCDGP3 O_ XA6
C4 DDR_RTT AI NC
C5 DDRDQ10 O_ _low NC
C10 DDRCS0 O_ _low NC
C11 DDRODT1 O_ _low NC
C12 DDRA1 O_ _low NC
C13 DDRBA2 O_ _low NC
C18 DDR_REF0 AI NC
C19 SPI2DO O_ _low UCFG4(strap)
D1 MEMXA13_BA0_LCDD1 O_ SD_BA0
D2 MEMXA7_LCDGP4 O_ XA7
D3 MEMXA14_BA1_LCDD8 O_ SD_BA1
D4 MEMXA16 O_ _low NC_TP(GPIO4)
D5 DDRDQ9 O_ _low NC
D8 DDRDM0 O_ _low NC
D9 DDRRST_N O_ _low NC
D10 DDRCKE O_ _low NC
D11 DDRBA0 O_ _low NC
D12 VDD PI VDD (1.2)
D13 DDRA4 O_ _low NC
D17 SPI2DI O_ _low NC_TP(GPIO2)
D18 SPI2CK O_ _low BOOT_NFL(strap)
D19 D1RX O_PU NC_TP(GPIO1)
E1 MEMXA20_MEMRAS_LCDD16 O_ SD_RAS
E2 MEMXA9_LCDGP6 O_ XA9
E3 MEMXA8_LCDGP5 O_ XA8
E4 MEMRD O_ _low NC_TP(GPIO5)
E5 VDD PI VDD (1.2)
E6 VDD PI VDD (1.2)
E7 VDDIO_DDR PI VDDIO_DDR (1.8)
E8 VDD PI VDD (1.2)
E9 GND P GND
E10 VDDIO_DDR PI VDDIO_DDR (1.8)
E11 PLL2_DVDD PI PLL2_DVDD (1.2)
E12 E_VDDQ P PLL1_AVDD (1.2)
E13 PLL1_DVDD PI PLL1_AVDD (1.2)
E14 DDRPADLO AI NC
E15 SPI1CK O_ LCD_CLK
E16 DDRPADHI AI NC
E17 SPI1DO O_ LCD_D0
E18 F1SYNC O_ _low NC_TP(GPIO0)
E19 XI25M AI XI25M
F1 MEMCKE_EXTINT13 O_ SD_CKE
F2 MEMXA19_MEMCAS_LCDD9 O_ SD_CAS
F3 MEMXA11_LCDGP8 O_ XA11
F4 MEMXA15 O_ _low NC
F5 VDDIO_DDR PI VDDIO_DDR (1.8)
55

F11 PLL2_AVDD PI PLL2_AVDD (1.2)
F12 PLL1_AVSS P PLL1_AVSS
F13 PLL1_AVDD PI PLL1_AVDD (1.2)
F14 SPI1CS0 O_ LCD_CS
F15 D1TX O_ _low UCFG2(strap)
F16 TEST I_ TEST
F17 T1SCLK O_ _low UCFG3(strap)
F18 TRST I_ TRST
F19 XO25M O_ XO25M
G1 MEMCLK O_ SD_CLK
G2 MEMXA12_EXTINT14 O_ XA12
G3 MEMCS0_LCDD0 O_ _low NC
G4 MEMCS1_LPCLK O_ _low NC
G5 VDDIO PI VDDIO (3.3)
G6 GND P GND
G7 GND P GND
G8 GND P GND
G9 GND P GND
G10 GND P GND
G11 VDDIO_DDR PI VDDIO_DDR (1.8)
G12 PLL2_AVSS P PLL2_AVSS
G13 PLL3_DVDD P PLL3_DVDD (1.2)
G14 SPI1DI O_ LCD_A0
G15 TCK I_ TCK
G16 TDI I_ TDI
G17 EXTINT15_SYNCPORT O_ _low NC_TP(GPIO3)
G18 RF_RADIO_EN_EXTINT9 O_ ST3
G19 MAIN_CLK_OUT O_ 25MOUT
H1 MEMXD8_LCDD12 I/O_ XD8
H2 MEMDQMBLS0_LCDD17 O_ DQMBLS0
H3 MEMCS2_EXTINT6 O_ SD_CS
H4 MEMCS3_EXTINT7 I_ PHY_INT
H5 VDD PI VDD (1.2)
H6 VDDIO PI VDDIO (3.3)
H7 GND P GND
H8 GND P GND
H9 GND P GND
H10 GND P GND
H11 GND P GND
H12 GND P GND
H13 PLL3_AVSS P PLL3_AVSS
H14 ETEST I_ ETEST
H15 TMS I_ TMS
H16 TDO O_ TDO
H17 RF_SDATA_IN_SD_D3 O_ LCD_RST
H18 RF_TR_DATA_EXTINT10 O_ LCD_CONTRAST_A
H19 RF_SLOT_CTRL_SD_DETECT O_ LCD_CONTRAST_B
J1 MEMXD9_LCDD13 I/O_ XD9
J2 MEMXD7_LCDD11 I/O_ XD7
J3 MEMDQMBLS1_EXTINT5 O_ DQMBLS1
J4 MEMWR O_ SD_WE
J5 VDDIO PI VDDIO (3.3)
J6 GND P GND
J7 GND P GND
J8 GND P GND
J9 GND P GND
J10 GND P GND
J11 GND P GND
J12 OSC25M_VSS P OSC25M_VSS
J13 OSC25M_VDD12 PI OSC25M_VDD12
J14 IF_T_DATA O_ _low NC
J15 IF_RX1 O_ _low NC
J16 RF_SEN_SD_WR_PROT O_ ST2
J17 RF_SCLK_SD_D2 O_ ST1
J18 RF_SDATA_OUT_SD_D1 O_ ST0
J19 IF_EN_DA O_ _low NC
K1 MEMXD6_LCDD10 I/O_ XD6
56

K5 VDD PI VDD (1.2)
K6 GND P GND
K7 GND P GND
K8 GND P GND
K9 GND P GND
K10 GND P GND
K11 GND P GND
K12 VDDIO PI VDDIO (3.3)
K13 VDD PI VDD (1.2)
K14 IF_INT_ANA O_ _low NC
K15 IF_MLSE O_ _low NC
K16 IF_NARES O_ _low NC
K17 IF_DATA_DA O_ _low NC
K18 AMPOUT0 AO AMPOUT0
K19 AMPOUT1 AO AMPOUT1
L1 MEMXD3_LCDD5 I/O_ XD3
L5 VDDIO_RGMII PI VDDIO_RGMII (3.3)
L6 VDDIO PI VDDIO (3.3)
L7 GND P GND
L8 GND P GND
L9 GND P GND
L10 GND P GND
L11 GND P GND
L12 GND P GND
L13 PLL3_AVDD PI PLL3_AVDD (1.2)
L14 IF_EN_AD O_ _low NC
L15 IF_DATA_AD O_ _low NC
L16 IF_CLK_IF O_ _low NC
L17 AMPOUT2 AO NC
L18 AMPOUT3 AO NC
L19 DIFFIN1P AI DIFFIN1P
M1 MEMXD1_LCDD3 I/O_ XD1
M5 VCC_USB2 PI VCC_USB2 (3.3)
M6 VDDL_USB1 PI VDDL_USB1 (1.2)
M7 OSC12M_VSS P OSC12M_VSS
M8 VDD PI VDD (1.2)
M9 GND P GND
M10 VDD PI VDD (1.2)
M11 GND P GND
M12 GND P GND
M13 VDDIO_APU PO VDDIO_APU (1.8)
M14 VDDIO_RFAPU PI VDDIO_RFAPU (1.8)
M15 VCC_AMP_OUT PI VCC_AMP_OUT (3.3)
M16 GND_AMP_OUT P GND
M17 DIFFIN0N AI DIFFIN0N
M18 DIFFIN0P AI DIFFIN0P
M19 DIFFIN1N AI DIFFIN1N
N1 MEMXD12_LCDD18 I/O_ XD12
N2 MIIRXER_EXTINT12 O_ E_RST
N3 MII_TXER_SPI1CS1 O_ E_TXER
N4 MDC O_ E_MDCLK
N5 VDDA_USB1 PI VDDA_USB1 (3.3)
N6 USB1VRES I_ USB1VRES
N7 OSC12M_VDD12 PI OSC12M_VDD12
N8 VDDIO_NFLQSPI PI VDDIO_NFLQSPI (3.3)
N9 VDDIOC PI VDDIOC (3.3)
N10 VDDIO PI VDDIO (3.3)
N11 DGPIO30 O_ _low NC
57

N12 VDD PI VDD (1.2)
N13 VDD_ANA PO VDD_ANA (1.8)
N14 MICPWR1 PO NC
N15 SINGIN0 AI NC
N16 VCCA PI VCCA (3.3)
N17 GNDA P GND
N18 XI13M AI NC
N19 BCLK O_ _low NC
P1 MIIRXD1_RGMIIRD1 I_ E_RXD1
P4 MIIRXCRS_U2TX I_ E_CRS
P5 USB1ID I_ USB1ID
P6 USB1VBUS PI USB1VBUS (5.0)
P7 KEY_COL6 O_ LED FF1(Green)
P8 KEY_ROW9 O_ LED AUTO ANS(Red)
P9 KEY_ROW8 O_ LED INTERCOM(Green)
P10 KEY_ROW7_IIC2SDA O_ LED FF3(Red)
P11 U1CTS_DIGMIC_DATA O_ LED SP-PHONE
P12 DGPIO31 O_ _low NC
P13 TPX2 O_ _low NC
P14 VREF PO VREF
P15 MICPWR0 PO MICPWR0
P16 SINGIN1 AI NC
P17 DCIN2 AI NC
P18 TPS O_ _low NC
P19 XO13M O_ _low NC
R1 MIIRXCK_RGMIIRXC I_ E_RXCLK
R2 MIICRS_DV_RGMIIRX_CTL I_ E_RXDV
R3 MIIRXD0_RGMIIRD0 I_ E_RXD0
R4 MDIO I/O_ E_MDIO
R5 NFLREADY1_MEMXA22 I_ NFLREADY
R6 NFLD7_MEMXA21 I/O_ NFLD7
R7 EXTINT3_CLK_REF_OUT O_ CLK_REF_OUT
R8 EXTINT1_IIC1SCL O_ 25M50MSTRAP
R9 KEY_ROW3 I_PU KEY_IN3
R10 KEY_COL5 O_ LED FF1(Red)
R11 U1RX O_PU NC_TP(URX)
R12 U1RTS_DIGMIC_CLK O_ LED RINGER
R13 FORCEMUTE I_ FORCEMUTE
R14 LEDSINK2 O_ _low NC
R15 VDD12_DCLS PI VDD12_DCLS
R16 VSS P GND
R17 VSS P GND
R18 TPY1 O_ _low NC
R19 DCIN0 AI NC
T1 MIITXEN_RGMIITX_CTL O_ E_TXEN
T2 MIIREFCK_RGMIITXC I_ E_TXCLK
T3 MIICOL_U2RX I_ E_COL
T4 NFLRD_MEMXA24 O_ NFLRD
T5 NFLCS0_MEMXA18 O_ NFLCS0
T6 NFLD4_QDQ3 I/O_ NFLD4
T7 NFLD5_QCS0 I/O_ NFLD5
T8 KEY_ROW0 * P.37 I_PU KEY_IN0
T9 KEY_COL1 O_ KEY_OUT1
T10 KEY_COL4 O_ KEY_OUT4
T11 U1TX O_ _low UCFG1(strap)
T12 TEST_ANA I_ TEST_ANA
T13 EXT_REG_CTL O_
T14 DCDC_VSENS I_ DCDC_VSENS
T15 SINK_DCLS P SINK_DCLS0
T16 SINK_DCLS P SINK_DCLS1
T17 TPX1 O_ _low NC
T18 TPY2 O_ _low NC
T19 GNDI P GND
U1 MIITXD1_RGMIITD1 O_ E_TXD1
U2 MIITXD0_RGMIITD0 O_ E_TXD0
58

U3 USB1N I/O_ USB1N
U4 NFLALE_MEMXA17 O_ NFLALE
U5 NFLWR_MEMXA23 O_ NFLWR
U6 NFLD1_QDQ0 I/O_ NFLD1
U7 EXTINT0_IIC1SDA O_ _low NC
U8 KEY_ROW1 I_PU KEY_IN1
U9 KEY_COL0 O_ KEY_OUT0
U10 KEY_ROW6_IIC2SCL O_ LED FF2(Green)
U11 EXTINT8_DRV_Vbus O_ LED FF3(Green)
U12 DCINS AI NC
U13 PWM0 O_ _low NC
U14 VCC5V_DCDC PI VCC5V_DCDC
U15 VDD18_DCLS PI VDD18_DCLS (1.8)
U16 VCC5V_DCLS PI VCC5V_DCLS
U17 VCC5V_DCLS PI VCC5V_DCLS
U18 VSS P GND
U19 DCIN1 AI NC
V1 MIITXD3_RGMIITD3 O_ E_TXD3
V2 MIITXD2_RGMIITD2 O_ E_TXD2
V3 USB1P I/O_ USB1P
V4 NFLD3_QDQ2 I/O_ NFLD3
V5 NFLCLE_MEMXA25 O_ NFLCLE
V6 NFLD2_QDQ1 I/O_ NFLD2
V7 EXTINT2_CLK_OUT O_ _low NC_TP(CL101)
V8 KEY_ROW4 I_PU KEY_IN4
V9 KEY_COL3 O_ KEY_OUT3
V10 KEY_ROW5 I_PD KEY_IN5(HOOK)
V11 SD_D0 O_ _low CKOUT0_STRAP
V12 RSTN I_ RSTN
V13 LEDSINK1_PWM1 O_ _low NC
V14 COIL_DCDC PO COIL_DCDC
V15 VDD18_DCDC PO VDD18_DCDC
V16 VCC33SW_DCLS PI VCC33SW_DCLS (3.3)
V17 VCC_ANA PI VCC_ANA (3.3)
V18 PAOUTN AO PAOUTN
V19 PAOUTP AO PAOUTP
W1 USB2N I/O_ NC(USB2N)
W2 USB2P I/O_ NC(USB2P)
W3 XI12M I_ XI12M
W4 XO12M O_ XO12M
W5 NFLD0_QCLK I/O_ NFLD0
W6 NFLD6_QCS1 I/O_ NFLD6
W7 KEY_COL7_SPI2CS O_ LED FF2(Red)
W8 KEY_ROW2 I_PU KEY_IN2
W9 KEY_COL2 O_ KEY_OUT2
W10 SD_CLK O_PU CKOUT1_STRAP
W11 SD_CMD O_PU UCFG0(strap)
W12 VCC_ANA PI VCC_ANA (3.3)
W13 GND_DCDC P GND
W14 SINK_DCDC P SINK_DCDC
W15 DCDC_VRP PO DCDC_VRP
W16 VCC33_DCDC PO VCC33_DCDC (3.3)
W17 VDDSW_DCLS PI VDDSW_DCLS (1.8)
W18 VSS P GND
W19 DCIN3 AI NC
59
15.1.2. IC201
24
23
22
21
20
19
18
17
16
15
14
13
VDDIO1
GND1
SMTXD30
SMTXD31
SMTXD32
SMTXEN3
X2
X1
NC
SMTXD33/EN_REFCLKO_3
25 SMRXDV3 TXP2 12
26 SMRXD33/REFCLKO_3 TXM2 11
27 SMRXD32 AGND 10
28 SMRXD31 RXP2 9
SMTXER3/MII_LINK_3
*SPISN SMTXC3/REFCLKI_3
29 SMRXD30 RXM2 8
30 SMRXC3 VDDA_1.8 7
31 GND2 ISET 6
32 VDDC IC201 VDDA_3.3 5
33 SCOL3 TXP1 4
34 SCRS3 TXM1 3
35 *INTRN RXP1 2
SCL_MDC RXM1
SDA_MDIO
36 1
VDDIO2
P1LED1
P1LED0
P2LED1
P2LED0
VDDCO
FXSD1
*RSTN
SPIQ
GND
37
38
39
40
41
42
43
44
45
46
47
48
Pin No. Terminal Name I/O Setting Contents of Control Remark
1 RXM1 I/O LAN Port : Physical receive or transmit signal(- differential)
2 RXP1 I/O LAN Port : Physical receive or transmit signal(+ differential)
3 TXM1 I/O LAN Port : Physical transmit or receive signal(- differential)
4 TXP1 I/O LAN Port : Physical transmit or receive signal(+ differential)
5 VDDA_3.3 AP 3.3V analog VDD
6 ISET O Pull-down this pin with a 11.8K 1% resistor to ground.
7 VDDA_1.8 AP 1.8V analog VDD
8 RXM2 I/O PC Port : Physical receive or transmit signal(- differential)
9 RXP2 I/O PC Port : Physical receive or transmit signal(+ differential)
10 AGND G Analog Ground
11 TXM2 I/O PC Port : Physical receive or transmit signal(- differential)
12 TXP2 I/O PC Port : Physical receive or transmit signal(- differential)
13 NC - Not in use
14 X1 I 25MOUT from IC101 (25.000MHz)
15 X2 O Not in use
16 SMTXEN3 I MAC transmit enable
17 SMTXD33/ Ipu/I MAC transmit data
EN_REFCLKO_3
18 SMTXD32 Ipu/I MAC transmit data
19 SMTXD31 I MAC transmit data
20 SMTXD30 I MAC transmit data
21 GND G Digital system ground
22 VDDIO P Digital system power supply (3.3V)
23 SMTXC3/REFCLKI_3 I/O MAC transmit clock
24 SMTXER3/MII_LINK_3 Ipd MAC transmit error
25 SMRXDV3 Ipu/O MAC receive data valid
26 SMRXD33/ Ipu/O MAC receive data
REFCLKO_3
27 SMRXD32 Ipu/O MAC receive data
30 SMRXC3 I/O MAC receive clock
32 VDDC P Digital system power supply (1.8V)
33 SCOL3 I/O MAC collision detection
34 SCRS3 I/O MAC carrier sense
35 INTRN Opu Not in use
36 SCL_MDC I/O MAC MII control clock
37 SDA_MDIO I/O MAC MII control data
38 SPIQ Ipd/O Not in use
39 SPISN I Not in use
40 VDDIO P Digital system power supply (3.3V)
42 VDDCO P Digital system power output (1.8V)
43 P1LED1 Ipu/O Not in use
60
Pin No. Terminal Name I/O Setting Contents of Control Remark

44 P1LED0 Ipd/O Not in use
47 RSTN Ipu Reset
48 FXSD1 I Not in use
61
15.2. Cabinet and Electric Parts
62
15.3. Accessories and Packing Materials
P1
A4
P2
A1 A2 A3
P3
A5
P5
P4
63
15.4. Replacement Parts List

1. RTL (Retention Time Limited) Safety Ref. Part No. Part Name & Description Remarks
No.
Note:
10 PNJK1217Y PUSH BUTTON (WHITE)
The “RTL” marking indicates that its Retention Time is
10 PNJK1217Z PUSH BUTTON (BLACK)
Limited.
11 PNBX1379Z2 PUSH BUTTON (WHITE) S
When production is discontinued, this item will 11 PNBX1379Z1 PUSH BUTTON (BLACK) S
continue to be available only for a specific period of 12 L0AA05A00105 SPEAKER
time. 13 PNHR1330Z SPACER
This period of time depends on the type of item, and 14 PNHG1244Z RUBBER PARTS
the local laws governing parts and product retention. 15 PNYMT511PSXW CABINET BODY (WHITE)
15 PNYMT511PSXB CABINET BODY (BLACK)
At the end of this period, the item will no longer be
16 PNKF1318Y2 CABINET COVER (WHITE) S
available.
16 PNKF1318Y1 CABINET COVER (BLACK) S
2. Important safety notice 17 PNHA1013Z RUBBER PARTS
Components identified by the mark indicates special 18 PSHR1380Z SPACER
characteristics important for safety. When replacing any 19 PNKL1045Z2 STAND (WHITE) S
of these components, only use specified manufacture's 19 PNKL1045Z1 STAND (BLACK) S
20 PNYE1511PXW NAME PLATE (KX-NT511PXW)
parts.
20 PNYE1511PXB NAME PLATE (KX-NT511PXB)
3. The S mark means the part is one of some identical parts. 20 PNYE1511PSXW NAME PLATE (KX-NT511PSXW)
For that reason, it may be different from the installed part. 20 PNYE1511PSXB NAME PLATE (KX-NT511PSXB)
4. ISO code (Example: ABS-94HB) of the remarks column 21 PNHR1336Z PLASTIC PARTS
shows quality of the material and a flame resisting grade 22 L0CBZY000004 BUILTIN-MICROPHONE
about plastics. 23 PQJJ1T036T JACK/SOCKET
24 K2ECYZ000002 JACK/SOCKET
5. RESISTORS & CAPACITORS
Unless otherwise specified;
A XTB26+10GFJ SMALL SCREW, STEEL
All resistors are in ohms () k=1000, M=1000k
All capacitors are in MICRO FARADS (F) p=F
*Type & Wattage of Resistor 15.4.2. Accessories and Packing Materials
Safety Ref. Part No. Part Name & Description Remarks

No.
A1 PNLXQ1002Z HANDSET (WHITE)
A1 PNLXQ1001Z HANDSET (BLACK)
!!
A2 XWG35FJ WASHER S
A3 PQHE5004Y W00D SCREW, STEEL
A4 PQJA212M CORD (WHITE)
A4 PQJA212V CORD (BLACK)
A5 PNQW3862Z LEAFLET
(KX-NT511PXB/PXW)
A5 PNQW3861Z LEAFLET
(KX-NT511PSXB/PSXW)
P1 XZB30X40A05 PROTECTION COVER

P4 PNPK3750001Z GIFT BOX
P5 PNYE2511PXW NAME PLATE (KX-NT511PXW)
P5 PNYE2511PXB NAME PLATE (KX-NT511PXB)
P5 PNYE2511PSXW NAME PLATE (KX-NT511PSXW)
P5 PNYE2511PSXB NAME PLATE (KX-NT511PSXB)
15.4.1. Cabinet and Electrical Parts 15.4.3. Main Board Parts

Safety Ref. Part No. Part Name & Description Remarks No.
No.
(ICs)
1 PNHR1932Z LCD HOLDER
IC101 C2HBBY000150 IC
2 L5DYAYY00019 LIQUID CRYSTAL DISPLAY
IC102 C3ABRY000078 IC
3 PNGP1320Z1 PANEL S
IC103 It is impossible to replace IC103 by itself.
4 PNJE1198Z GOLD FFC (P1 22PIN)
IC201 C1CB00003563 IC
5 PNKM1534X2 CABINET BODY (WHITE) S
IC202 C0DBAYY01648 IC
5 PNKM1534X1 CABINET BODY (BLACK) S
IC301 C0EBH0000445 IC
6 PNKE1079Z2 HOOK KNOB(WHITE) S
6 PNKE1079Z1 HOOK KNOB(BLACK) S (TRANSISTORS)
7 PNGD1074Z CARD Q101 B1GFCFEN0011 TRANSISTOR(SI) S
8 PNHR1933Z TEL CARD COVER Q102 PSVTUMG11NTR TRANSISTOR(SI) S
9 PNBH1021Z2 PUSH BUTTON (WHITE) S Q103 PSVTUMG11NTR TRANSISTOR(SI) S
9 PNBH1021Z1 PUSH BUTTON (BLACK) S Q104 PSVTUMG11NTR TRANSISTOR(SI) S
64
Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks
No. No.
Q105 PSVTUMG11NTR TRANSISTOR(SI) S C212 ECUE1H331KBQ 330p
Q106 PSVTUMG2NTR TRANSISTOR(SI) S C213 F1J0J2260004 22
C214 ECUE1C103KBQ 0.01
(DIODE) C215 F1J0J2260004 22
D210 DB2X41400L DIODE C216 ECUE1A104KBQ 0.1
D211 DZ2J056M0L DIODE(SI) C217 ECUE1A104KBQ 0.1
C218 ECUE1A104KBQ 0.1
(CONNECTORS) C222 F1J1A106A043 10
CN1 K1MN22BA0238 CONNECTOR C223 ECUE1A104KBQ 0.1
CN2 K1MN14BA0110 CONNECTOR C224 F1J1A106A043 10
(COMPONENTS) C226 ECUE1A104KBQ 0.1
RA101 EXB28V101JX COMPONENTS PARTS C229 ECUE1C103KBQ 0.01
RA102 EXB28V330 COMPONENTS PARTS C230 F1J1A2260003 22
RA103 EXB28V330 COMPONENTS PARTS C235 F1J0J2260004 22
RA104 EXB28V330 COMPONENTS PARTS C236 F1J1A106A043 10
RA105 EXB28V330 COMPONENTS PARTS C237 F1J0J2260004 22
RA107 EXB28V101JX COMPONENTS PARTS C240 ECUE1A104KBQ 0.1
RA108 EXB28V101JX COMPONENTS PARTS C241 F1J1C106A059 10
RA110 EXB28V101JX COMPONENTS PARTS C243 F1K1C226A119 22
RA202 EXB28V101JX COMPONENTS PARTS C247 ECUV1H332KBV 0.0033
(CAPACITORS) C249 ECUE1C104KBQ 0.1
C101 ECUE1H100DCQ 10p C250 ECUE1A104KBQ 0.1
C102 ECUE1H120JCQ 12p C251 ECUE1A104KBQ 0.1
C104 ECUE1H220JCQ 22p C253 ECUE1C104KBQ 0.1
C105 ECUE1A104KBQ 0.1 C254 ECUE1A104KBQ 0.1
C106 ECUE1A104KBQ 0.1 C255 F1J2A473A024 0.047
C107 ECUE1A104KBQ 0.1 C256 F1J2A473A024 0.047
C113 F1J0J2260004 22 C267 ECUE1A104KBQ 0.1
C125 ECUE1A104KBQ 0.1 C302 ECUE0J105KBQ 1
C126 ECUE1A104KBQ 0.1 C303 F1J0J2260004 22
C130 ECUV1A225KBV 2.2 C306 ECUE0J105KBQ 1
C131 ECUV1A225KBV 2.2 C307 F1H0J1060006 10
C132 ECUV1A225KBV 2.2 C308 ECUE1A224KBQ 0.22
C134 ECUE1C103KBQ 0.01 C310 ECUE1H221KBQ 220p
C136 ECUE1A104KBQ 0.1 C312 F1J0J2260004 22
C137 ECUE1A104KBQ 0.1 C313 ECUE1H221KBQ 220p
C138 F1G1A105A047 1 C314 ECUE1A104KBQ 0.1
C139 F1G1A105A047 1 C315 ECUE1H221KBQ 220p
C140 ECUE1H221KBQ 220p C316 ECUE1A104KBQ 0.1
C141 ECUE1H221KBQ 220p C317 ECUE1H221KBQ 220p
C143 ECUE1H221KBQ 220p C319 ECUE1H221KBQ 220p
C202 F1K3D1020001 1000p C321 ECUE1H221KBQ 220p
C203 ECUE1H102KBQ 0.001 C322 ECUE1A104KBQ 0.1
C205 ECUE1H102KBQ 0.001 C324 ECUE0J105KBQ 1
C207 ECUV1H103KBV 0.01 C326 ECUE1A104KBQ 0.1
C208 ECUV1H103KBV 0.01 C327 ECUE1C103KBQ 0.01
C209 ECUV1H103KBV 0.01 C328 ECUE1H101JCQ 100p
C210 ECUV1H103KBV 0.01 C329 F1H0J1060006 10
65
No. No.
C330 ECUE1A104KBQ 0.1 R140 ERJ2GEJ222 2.2k
C331 F1J0J2260004 22 R141 ERJ2GEYJ474 470k
C332 ECUE1A104KBQ 0.1 R142 ERJ2GEJ183 18k
C333 ECUE1A104KBQ 0.1 R143 ERJ2GEJ333 33k
C334 ECUE1A104KBQ 0.1 R145 ERJ2GEJ101 100
C335 ECUE1A104KBQ 0.1 R146 ERJ3GEY0R00 0
C337 F1J0J2260004 22 R148 ERJ2GEJ181 180
C347 ECUE1H151JCQ 150p R159 ERJ2GEJ330 33
C353 ECUE1H102KBQ 0.001 R162 ERJ2GEJ472X 4.7k
C355 F1J1A106A043 10 R164 ERJ2GEJ472X 4.7k
C357 ECUE1H331KBQ 330p R165 ERJ2GEJ472X 4.7k
C365 ECUE1A104KBQ 0.1 R168 ERJ2GEJ472X 4.7k
C366 ECUE1A104KBQ 0.1 R169 ERJ2GEJ472X 4.7k
C369 F1J1A106A043 10 R201 ERJ6GEYJ750 75
C371 ECUE1H331KBQ 330p R202 ERJ6GEYJ750 75
C372 ECUE1H331KBQ 330p R203 ERJ6GEYJ750 75
C375 F1H1A4750004 4.7 R204 ERJ6GEYJ750 75
C376 F1H1A4750004 4.7 R205 ERJ6ENF49R9V 49.9
C381 ECUE1H101JCQ 100p R206 ERJ6ENF49R9V 49.9
C385 F1H0J1060006 10 R210 ERJ6ENF49R9V 49.9
C386 ECUE1A104KBQ 0.1 R211 ERJ6ENF49R9V 49.9
C392 ECUE1H151JCQ 150p R213 ERJ2RKF1182X 11.8k
R214 ERJ2GEJ271 270
(RESISTORS) R215 ERJ2GEJ101 100
L103 ERJ2GE0R00 0 R216 ERJ2GEJ472X 4.7k
R217 ERJ2GEJ472X 4.7k
R101 ERJ2GEJ101 100 R218 ERJ2GEJ101 100
R102 ERJ2GEJ101 100 R219 ERJ2GEJ103 10k
R103 ERJ2GEJ101 100 R220 ERJ2GEJ271 270
R105 ERJ2GEJ472X 4.7k R231 ERJ2GEJ103 10k
R106 ERJ2GE0R00 0 R232 ERJ2GEJ103 10k
R107 ERJ2GE0R00 0 R234 ERJ2GEJ104 100k
R108 ERJ2GEJ151 150 R235 ERJ3GSYJ123 12k S
R110 ERJ2GEJ471 470 R236 ERJ2RKF4702 47k
R111 ERJ2GEJ105X 1M R237 ERJ2RKF1502 15k
R112 ERJ2GEJ470 47 R238 ERJ3GEY0R00 0
R113 ERJ2GEJ105X 1m R239 ERJ3GEY0R00 0
R114 ERJ2GEJ472X 4.7k R240 ERJ3GEY0R00 0
R115 ERJ2RKF4702 47k R241 ERJ6GEYJ271 270
R124 ERJ2GEJ101 100 R244 ERJ2GEJ472X 4.7k
R125 ERJ2GEJ101 100 R301 ERJ3GEYJ100 10
R127 ERJ2GEJ101 100 R304 ERJ2GE0R00 0
R128 ERJ2GEJ101 100 R305 ERJ2GEJ472X 4.7k
R129 ERJ2GEJ121 120 R306 ERJ2GE0R00 0
R130 ERJ2GEJ101 100 R307 ERJ2GE0R00 0
R132 ERJ2GEJ472X 4.7k R308 ERJ2GE0R00 0
R139 ERJ2GEJ472X 4.7k R311 ERJ2GEJ332 3.3k
66
No. No.
R312 ERJ2GEJ332 3.3k
R313 ERJ2GEJ221 220 (CONNECTOR AND WIRES)
R314 ERJ2GEJ221 220 CN11 K1MN22BA0238 CONNECTOR
R315 ERJ2GEJ331 330
R316 ERJ2GEJ222 2.2k (RESISTORS)
R317 ERJ2GEJ222 2.2k J201 ERJ8GEY0R00 0
R322 ERJ2GEJ221 220 J204 ERJ8GEY0R00 0
R323 ERJ2GEJ221 220
R324 ERJ2GEJ331 330 R405 PQ4R18XJ222 2.2k S
R326 ERJ2GEJ222 2.2k (FILTER)
R327 ERJ2GE0R00 0 L401 J0JYC0000070 IC FILTER
R328 ERJ2GE0R00 0
R329 ERJ2GE0R00 0 (SWITCH)
R330 ERJ2GE0R00 0 SW1 K0L1LB000021 PUSH SWITCH
(FILTERS AND COILS) 15.4.5. PoE Board Parts

L101 J0JYC0000070 IC FILTER
L104 J0JCC0000251 IC FILTER Safety Ref. Part No. Part Name & Description Remarks
No.
L105 J0JCC0000274 IC FILTER
(IC)
IC401 C1CB00003680 IC
(TRANSISTOR)
Q401 B1CFNM000001 TRANSISTOR(SI)
(DIODES)
D401 B0EDER000009 DIODE(SI)
D402 B0EDER000009 DIODE(SI)
D403 B0BC06800004 DIODE(SI)
D405 B0BC06800004 DIODE(SI)
D406 B0JCML000007 DIODE(SI)
D408 DB2X41400L DIODE(SI)
L210 G0B150G00002 COIL
L211 G1C100MA0426 COIL
(FILTERS AND COILS)
L307 G1C6R8MA0749 COIL
(FUSE)
F1 K5H302Y00003 FUSE
L415 G0B150G00002 COIL

(VARISTORS)
D209 D4ED1270A011 VARISTOR
D303 D4ED18R00008 VARISTOR
(FUSE)
F401 K5H102200004 FUSE
(JACKS)
JK1 K2LC1YYA0022 JACK/SOCKET
JK2 K2LC1YYA0022 JACK/SOCKET
(TRANSFORMERS)
T1 G5BYE0000038 TRANSFORMER (CAPACITORS)
T2 G5BYC0000031 TRANSFORMER C401 F1J2A473A024 0.047u
C402 ECUE1H150JCQ 15p
(CRYSTAL OSCILLATORS) C403 ECUE1H561KBQ 560p
X1 H0J250500114 CRYSTAL OSCILLATOR C405 F1J2A102A041 1000p
X2 H0J120500078 CRYSTAL OSCILLATOR C406 ECUV1E333KBV 0.033
C407 F2GZZ220A033 22
C408 F1K2A105A012 1u
15.4.4. Ope Board Parts C409 F1K2A105A012 1u
C410 F1K2A105A012 1u
Safety Ref. Part No. Part Name & Description Remarks C411 ECUE1A224KBQ 0.22
No. C412 F1H1E1050001 1u
(DIODES) C415 ECUV1H104KBV 0.1
LED401 B3AGB0000050 DIODE(SI) C417 F1J1C475A059 4.7u
LED402 B3AGB0000050 DIODE(SI) C418 F1J1C106A191 10u
LED403 B3AGB0000050 DIODE(SI) C419 F1J1C106A059 10u
LED404 B3ABB0000294 DIODE(SI) C420 F1J1C106A059 10u
LED405 B3AAB0000316 DIODE(SI) C421 F2G1E2200014 22
LED406 B3AAB0000316 DIODE(SI) C422 F1J1C106A059 10u
LED407 B3AAB0000316 DIODE(SI)
67

No.
C423 F1H1E1050001 1u
C425 ECUE1H102KBQ 0.001
C426 F1J2A473A024 0.047u
C427 F1J2A473A024 0.047u
(RESISTORS)
R401 ERJ6GEYJ750 75
R402 ERJ6GEYJ750 75
R403 ERJ6GEYJ750 75
R404 ERJ6GEYJ750 75
R411 ERJ2RKF1003 100k
R412 ERJ2RKF2492X 24.9k
R413 ERJ14NF9530U 953
R414 ERJ6GEY0R00 0
R415 ERJ2GEJ753 75k
R416 ERJ3GEYJ151 150
R417 ERJ2GE0R00 0
R418 D1BGR510A007 0.51
R420 ERJ2GE0R00 0
R421 ERJ2GEJ821 820
R422 ERJ2GEJ562X 5.6k
(WIRES)
CN12 PNJE1197Y LEAD WIRE
CN13 PNJE1197Y LEAD WIRE
CN14 PNJE1205Z LEAD WIRE
15.4.6. AC adaptors List

Model AC adaptor Type Part Number
Destination
KX-NT511PX ABX PNLV226CE0Z
AX PNLV226Z
ABR PQLV219LBY
AAG PNLV226AG0Z
AE PNLV226EZ
KX-NT511PSX ASX PNLV226SX0Z
N.K
KXNT511PXW/PXB
KXNT511PSXW/PSXB
68

KX NT511P

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

KX NT511P

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KX NT511P

Uploaded by

Copyright:

Available Formats

ORDER NO.

© Panasonic System Networks Co., Ltd. 2014

1.1. For Service Technicians

2.1.1. Suggested PbF Solder

2.2. Discarding of P. C. Board

Display Main 1 line

VoIP Connection Method MGCP

VoIP Audio Codec G.722, G711, G.729A

Ethernet Interface 10Base-T/100Base-TX

IP Address Mode Automatic (DHCP), Manual (static)

Ethernet Port (LAN) 2 (RJ45)

Maximum Power Consumption 2.1 W

Flash SDRAM DSPG DVF9919 Power supply

LED 10Port P_1

Key matrix KEY

LED PCB Xtal

LCD module USB(1)

NT511PX/PSX Block Diagram

4.2. Circuit Operations

R143 C135 14 Vss

4.2.2. Reset Circuit

4.2.3. Ethernet Circuit

001:5B E_COL PCR

001:5B E_RXDV D205 12 5

001:5C E_RST DGND

PHY_INT WAN_RXM DGND DGND PoE1

4.2.4. Analog Circuit

DGND DGND DGND

D307 C367 C363

AGND AGND C370 AGND AGND C362

AGND AGND AGND AGND AGND

CL-HS_MICM AGND AGND

Handset AGND AGND AGND AGND AGND AGND

4.2.5. Key Circuit

FF1 FF2 FF3 CONF UP

4.2.6. LED Circuit

SPP OPE_3.3V 【Ope PCB】

U10 3 R148 LED[1]

5 Location of Controls and Components

1 LCD (Liquid Crystal Display)

15 INTERCOM: Used to make or receive intercom calls.

16 SP-PHONE (Speakerphone): Used for performing

When selecting Ethernet cables (not included)

When connecting to a switching hub

When connecting cables and the AC adaptor

Set up unit in test mode by key control

7.1.2. Communication Test

Input number is 6 and 7 and the mode is as follows

2. Handset MIC  SP-phone SP

7.1.3. Quit Test Mode for communication test

7.2. KEYs and LEDs Test mode

Set up a unit in KEYs and LEDs Test mode by key control

7.2.2. KEYs and LEDs Test

7.2.3. Quit KEYs and LEDs Test mode

No Check the TEST POINT(ST0-ST3).

Confirm the LCD Display. No Related parts: RA110,L103,C129,C130,C131,

9.1.2. Power Supply : AC adaptor

Recheck the TEST POINT(ST0-ST3). No Related parts: See Table-2(P.2) to