Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Advance Design What Is New 2023.0.1 EN

    Uploaded by

    evariste ouedraogo
    This document provides release notes for improvements and corrections in Advance Design 2023.0.1. Key updates include corrections to issues with load case display, steel profile mapping during BIM import, section profile definition and import, mesh generation, and results display from combinations and reinforcement analysis. Additional fixes address problems with steel design verification results, lateral torsional buckling analysis and restraint definition, and dimensioning of steel elements from combinations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Advance Design What Is New 2023.0.1 EN

    Uploaded by

    evariste ouedraogo
    29 views3 pages
    This document provides release notes for improvements and corrections in Advance Design 2023.0.1. Key updates include corrections to issues with load case display, steel profile mapping during BIM import, section profile definition and import, mesh generation, and results display from combinations and reinforcement analysis. Additional fixes address problems with steel design verification results, lateral torsional buckling analysis and restraint definition, and dimensioning of steel elements from combinations.

    Original Description:

    guide

    Original Title

    Advance-Design-What-is-new-2023.0.1-EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides release notes for improvements and corrections in Advance Design 2023.0.1. Key updates include corrections to issues with load case display, steel profile mapping during BIM import, section profile definition and import, mesh generation, and results display from combinations and reinforcement analysis. Additional fixes address problems with steel design verification results, lateral torsional buckling analysis and restraint definition, and dimensioning of steel elements from combinations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views3 pages

    Advance Design What Is New 2023.0.1 EN

    Uploaded by

    evariste ouedraogo
    This document provides release notes for improvements and corrections in Advance Design 2023.0.1. Key updates include corrections to issues with load case display, steel profile mapping during BIM import, section profile definition and import, mesh generation, and results display from combinations and reinforcement analysis. Additional fixes address problems with steel design verification results, lateral torsional buckling analysis and restraint definition, and dimensioning of steel elements from combinations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    What's New in Design Modules of Advance Design 2022

    WHAT’S NEW
    IN

    2023

    1
    What's New in Advance Design 2023.0.1

    Improvements and corrections


    The Hotfix 1 to Advance Design 2023 includes the following corrections:

    General
    • Correction of the problem of displaying an additional and unsupported entry in the list of load
    cases ('D Loads') when adding load cases in Project Browser. (#138816)
    • Correction of the problem that occurred when mapping steel profiles during BIM model import,
    and which caused that despite the selection of a profile of a specific size, a profile of the same
    type but with the smallest height was assigned. (#138976)
    • Correction of the problem of incorrect functioning of the ‘Symmetric’ option, when defining or
    importing a section profile. (#139056, #140877, #141221)
    • Correction of the problem of the program crashing when opening the 'Used Cross Sections'
    window for a specific user model. (#139072)
    • Correction of the problem of incorrect load combination generation for some examples with
    defined moving load from cranes (especially monorail cranes). (#139359, #139641)
    • Correction of the problem with mesh generation on a specific customer model. (#139554)
    • Correction of the problem of incorrectly taking sectional parameters for a section defined as
    parametric in special cases. (#139940, #139971)
    • Correction of the problem of not recognizing linear elements as vertical elements if they were
    created during the conversion of lines to line elements. (#140559)
    • Correction of the problem of creating fictitious load cases (for example, with id=0) in the
    Masonry Wall module if modal analysis, buckling analysis, or pushover analysis were defined in
    the FE model. (#138121)

    Postprocessing & Reports


    • Correction of the problem of incorrect determination of node displacements for combinations
    from combinations. (#140479)
    • Correction of the problem of long result generation time from combinations. (#139648)
    • Correction of the problem of too much memory occupation for the generation of graphic
    envelopes from combinations. (#139968)
    • Correction of the problem that occurred when displaying diagrams on section cuts on a 3D
    model with results from reinforcement analysis, causing the diagrams for some of these results
    to be in the object plane and for others in a perpendicular plane. (#138823)
    • Correction of the problem of not being able to generate a report table with the results of
    support forces if only nonlinear supports were defined in the model. (#138590)
    • Correction of the problem of long generation time of the report table with information on
    relative level displacements from seismic combinations. (#139543)

    Steel design
    • Correction of the problem occurring when viewing lateral-torsional buckling results in the
    Shape Sheet report for cold-formed elements, which consisted in the lack of work ratio display
    for this verification in cases of Polish language version, as well as displaying the wrong force
    unit. (#138483)
    • Correction of the problem of not being able to define LTB restraints graphically in a specific
    user model. (#139191)

    2
    What's New in Advance Design 2023.0.1

    • Correction of the problem occurring during lateral torsional buckling analysis for cold-formed
    steel omega profiles, causing inaccuracies in the results for special cases. (#135019)
    • Correction of the problem of different results from the dimensioning of steel elements if one or
    many load combinations were selected, for a particular case on a customer model. (#140413)
    • Correction of the problem of the generation of very dense node division in steel elements for
    which the “continues restraint along flange” option is set in the lateral torsional buckling
    options. (#140708)
    • Correction of the problem of the lack of part of results on the shape sheet for U sections for a
    specific model. (#141240)

    You might also like