Epsonvs 43 A

Watch Movement Specification and Drawing
SOLAR SERIES
Cal. VS43A
Movement Size
11 1/2’’’
Casing Diameter
Ø 28.6mm
Height
3.50mm
Running Time
Approx. 6 months
Date: 21/May/'21
Cal. VS43A
Items Rev. Page
Features 03 1
Specifications 06 2
Appearance 01 3
Casing 02 4
Hand fitting 02 5
Hand setting stem 01 6
Dial-01 03 7-01
Dial-02 00 7-02
Casing ring 01 8
Solar cell unit-01 03 9-01
Solar cell unit-02 00 9-02
Attention-01 05 10-01
Attention-02 02 10-02
Cal. Date : 29/Jun./'20
VS43A Features Rev. : 03
1.Solar-powered watch
This watch is a solar-powered watch containing a solar cell underneath the dial to convert any form of
light into '' electrical energy'' and store the power in a secondary battery.
2. Eliminating the need for battery replacement

Unlike conventional quartz watches, this watch does not use a silver oxide battery, thus eliminating the
need for battery replacement.
3. You can use the dial which light transmittance is more than 30%
It is possible to assemble the dial which transmits light on the solar cell.
It enabled to cover the solar cell color, and you can design variety colors of dials.
4. Running time
Expected running time from full charge to stoppage will be around 6 months.
5. Power depletion warning function

The two-second intervals movement of the second hand is a signal of energy depletion.
The watch continuous running time after two-second intervals movement is 1 day.
6. Quick start function

This watch has a ''Quick start function''.
It start running within a few seconds after exposure to a light more than 1000Lx.
(Fluorescent lamp 30W/ 70cm)
7. Over charge prevent function is equipped

If the secondary battery is charged more than predetermined voltage, over charge prevent function is
operated to prevent the secondary battery deterioration and breakage.
8. Structure of the separated parts
Hour wheel spacer
Dial washer
Solar cell unit

Holding ring for dial
Solar cell
Solar cell lead terminal
Movement
Hand setting stem
P. 1
Cal. Date : 21/May/'21
VS43A Specifications Rev. : 06
Solar Quartz 11 1/2''' Movement / Three hands(H/M/S) with Day/Date
1. MOVEMENT DIMENSIONS
Outside diameter φ28.60mm
Total height 3.09mm (Including secondary battery : 3.50mm)
2. TIME STANDARD
Type of quartz oscillator Tuning fork
Frequency of quartz oscillator 32,768 Hz
Accuracy ±20 seconds per month (on wrist)
Operating temperature range －5℃ to ＋50℃
Regulation device Nil (Pre-adjusted)
3. INDICATOR / FUNCTIONS
3 Hands Hour / Minute / Second
Day/Date Instant setting device for date calendar
Reset switch
Power depletion warning function
(Second hand moves at 2-second intervals when voltage is 1.10V)
Quick start function
Running time Approx. 6 months (After fully charged)
Setting mechanism Crown at normal position : Free
Crown pulled out 1st click : Instant day / date change
Crown pulled out 2nd click : Time setting / Reset
4. FEATURES
Jewels 2 Jewels
Anti-magnetism Over 1600A/m (Direct current magnetic field)
Driving current consumption Approx. 0.6μA (1.35V)
Operation stopping voltage 1.0 V
Solar cell type Amorphous silicon solar cell
Maximum unbalance of hands Second hand : 0.045μN・m
Minute hand : 0.80μN・m
Hour hand : 0.50μN・m
5. SECONDARY BATTERY (Installed)

Type Lithium metal batteries
Size φ9.5mm × t 2.1mm
Nominal voltage 1.5 V
Capacity 3.0 mAh
6. SEPARATED PARTS (Parts code)

Solar cell unit 4020555 / 4020556
Hand setting stem 0351177
Solar cell lead terminal (2 pcs) 4246524
Hour wheel spacer 0493500
Dial washer 0491735
7. TEST OF ACCURACY
Equipment to be used SEIKO quartz tester QT-99,
Greiner quartz timer-C , Witschi Q-tester 4000
Duration of measurement 10 seconds
Microphone to be used Electromagnetic detection type
All specifications are subject to change without notice.
P. 2
Cal. Date : 21/May/'21
VS43A Attention-01 Rev. : 05
1. How to remove the setting stem

When removing the setting stem, put the setting stem at normal position and push the ''setting lever''
by tweezers.
The ''setting lever'' can not be push if the setting stem is not at normal position.
2. Attention for solar cell unit

Pay attention not to touch and scratch the surface of the solar cell.
3. Dial transparency rate

Keep the transparency rate of the dial more than 30%.
(Effective aperture is φ25mm)
Each elements of solar cell must be kept the transparency rate.
4. The guideline of charging time is as in below

(Dial transparency rate = 30%)
A B C
Illumination
Source of light Environment (Approx. (Approx. (Approx.
(Lx)
Hours) Hours) Minutes)
700 Inside the office － 33 47
A fluorescent lamp
3,000 30W 20cm 47 8 15
10,000 Cloudy 13 2 4
Sun light
100,000 Fine weather 5 42 minutes 1
Condition A : Time required for full charge

Condition B : Time required for steady operation
Condition C : Time to charge 1 day of power
5. Attention for the secondary battery unit

Please set the exclusive secondary battery unit.
(The secondary battery is Lithium metal batteries without any environmentally harmful substances.)
If the silver oxide battery is accidentally set and charged, there is a possibility of batｔery explosion.
To prevent from the battery explosion, it is adopted safety structure not to charge the silver oxide
battery even if it is accidentally set.
6. Caution
When charging the watch, do not place it too close to fluorescent lamp or other light sources as the
watch temperature will become extremely high, causing damage to the parts inside the watch.
P. 10-01
Cal. Date : 29/Jun./'20
VS43A Attention-02 Rev. : 02
7. How to set the solar cell lead terminal

(1) Please set one side of the solar cell lead terminal into the 318# or 319# hole first.
(2) Then, please set the other side of the solar cell lead terminal under the main plate according to the
following procedure.
(3) Tilt the spring slightly and slide the bottom part of the spring under the main plate.
Push the top part of the spring and place it under the main plate.
(Refer to the Fig.[1] in below.)
Pay attention not to damage the date disk.
319# 318#
(1)
(2),(3)
Fig.[1]
8. How to set the solar cell unit

Push above part of each hook on the solar cell unit into main plate certainly.
9.How to set the dial

The dial is held by the four guide poles on the solar cell unit.
P. 10-02

Epsonvs 43 A

Uploaded by

Copyright:

Available Formats

Epsonvs 43 A

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Epsonvs 43 A

Uploaded by

Copyright:

Available Formats

Watch Movement Specification and Drawing

2. Eliminating the need for battery replacement

5. Power depletion warning function

6. Quick start function

7. Over charge prevent function is equipped

8. Structure of the separated parts

Hour wheel spacer

Solar cell unit

Solar cell lead terminal

Hand setting stem

Solar Quartz 11 1/2''' Movement / Three hands(H/M/S) with Day/Date

5. SECONDARY BATTERY (Installed)

6. SEPARATED PARTS (Parts code)

All specifications are subject to change without notice.

1. How to remove the setting stem

2. Attention for solar cell unit

3. Dial transparency rate

4. The guideline of charging time is as in below

Condition A : Time required for full charge

5. Attention for the secondary battery unit

7. How to set the solar cell lead terminal

Pay attention not to damage the date disk.

8. How to set the solar cell unit

9.How to set the dial

You might also like