Sikacem - 100 MP

PRODUCT DATA SHEET
SikaCem®-100 MP
AIR ENTRAINING/PLASTICIZING ADMIXTURE FOR MORTARS AND RENDERS
DESCRIPTION CHARACTERISTICS / ADVANTAGES

SikaCem®-100 MP is a liquid admixture designed to ▪ Improved workability of mortars
provide improved plasticity and yield to cement based ▪ Reduced shrinkage
mortars and renders. ▪ More durable mortar
Suitable for use in hot and tropical climatic conditions. ▪ Increased yield
▪ Reduced bleed increases bond strength
USES ▪ Allows use of coarser sands
SikaCem®-100 MP is used as a plasticizer and workabil- APPROVALS / CERTIFICATES

ity improver for all types of cement / sand mortar mix
designs used for: SikaCem®-100 MP follows the requirements of BS EN
▪ Brick / block bedding mortars 934-3; Admixtures for masonry mortar as an air en-
▪ Renders training/plasticizing admixture
▪ Pointing mortars
PRODUCT INFORMATION
Composition Blend of organic compounds
Packaging 20 L pail, 200 L drum
Appearance / Colour Brown liquid
Shelf life 12 months from date of production if stored properly
Storage conditions Store in undamaged, unopened, original sealed packaging in dry conditions
at temperatures between +5 °C and +45 °C. Protect from direct sunlight
and frost.
Density ~1.01 kg/l (+25 °C)
Total Chloride Ion Content Nil (EN 934-2)
TECHNICAL INFORMATION
Mortar Mix Design When using SikaCem®-100 MP a suitable mortar mix must be designed for
the local material sources to the project specification and should be trialed.
Product Data Sheet

SikaCem®-100 MP
June 2018, Version 01.01
021405061000000051
1/2
APPLICATION INFORMATION
Recommended Dosage 0.3 - 0.7 % by weight of cement (0.15 - 0.35 L /50 kg cement).
Dosages outside of this range may be required depending on the mix
design, raw materials, climatic conditions and mortar requirements.
Trial mixes must be performed to establish the exact dosage rate required.
APPLICATION INSTRUCTIONS ECOLOGY, HEALTH AND SAFETY

MIXING For information and advice on the safe handling, stor-
age and disposal of chemical products, users shall refer
SikaCem®-100 MP is best added to the gauging water to the most recent Safety Data Sheet (SDS) containing
or simultaneously poured with it into the mixer. physical, ecological, toxicological and other safety-re-
If SikaCem®-100 MP is added directly to the dry mix an lated data.
increased dosage may be required.
For optimum utilization of the plasticizing action we LEGAL NOTES
recommend thorough mixing at a minimum wet mix-
ing time of 2 - 3 minutes. The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
IMPORTANT CONSIDERATIONS products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
If frozen and/or if precipitation has properly stored, handled and applied under normal
occurred SikaCem®-100 MP may only be used after conditions in accordance with Sika's recommenda-
thawing slowly at room temperature and intensive tions. In practice, the differences in materials, sub-
mixing. strates and actual site conditions are such that no war-
When using SikaCem®-100 MP a suitable mortar mix ranty in respect of merchantability or of fitness for a
must be designed for the local material sources and particular purpose, nor any liability arising out of any
should be trialed. legal relationship whatsoever, can be inferred either
When accidental overdosing occurs additional air will from this information, or from any written recom-
be entrained and the workability of the mortar in- mendations, or from any other advice offered. The
creased. user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
BASIS OF PRODUCT DATA serves the right to change the properties of its
products. The proprietary rights of third parties must
All technical data stated in this Data Sheet are based be observed. All orders are accepted subject to our
on laboratory tests. Actual measured data may vary current terms of sale and delivery. Users must always
due to circumstances beyond our control. refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
LOCAL RESTRICTIONS be supplied on request.
Note that as a result of specific local regulations the
declared data and recommended uses for this product
may vary from country to country. Consult the local
Product Data Sheet for the exact product data and
uses.
SIKA NORTHERN GULF SIKA SOUTHERN GULF SIKA SAUDI ARABIA

Bahrain / Qatar / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel: +966 11 217 6532
sika.gulf@bh.sika.com info@ae.sika.com info@sa.sika.com
gcc.sika.com gcc.sika.com gcc.sika.com
SikaCem-100MP-en-AE-(06-2018)-1-1.pdf
Product Data Sheet

SikaCem®-100 MP
June 2018, Version 01.01
021405061000000051
2/2

Sikacem - 100 MP

Uploaded by

Copyright:

Available Formats

Sikacem - 100 MP

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sikacem - 100 MP

Uploaded by

Copyright:

Available Formats

PRODUCT DATA SHEET

DESCRIPTION CHARACTERISTICS / ADVANTAGES

SikaCem®-100 MP is used as a plasticizer and workabil- APPROVALS / CERTIFICATES

Product Data Sheet

APPLICATION INSTRUCTIONS ECOLOGY, HEALTH AND SAFETY

SIKA NORTHERN GULF SIKA SOUTHERN GULF SIKA SAUDI ARABIA

Product Data Sheet

You might also like