Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Hydrogen Injection in Air Breathing Engi

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

ACADEMIA Letters

Hydrogen Injection in Air Breathing Engines for Better


Efficiency
Muzammil Arshad

Introduction
Improvement in engine efficiency and power along with fewer emissions has been an area of
research interest for engineers for quite some time now [1]. It has been proven in automo-
tive engines, by experiments and various computational studies, that secondary fuel injection
increases the engine performance [2,3]. To cater for less carbon emissions, hydrogen has
shown promising results [2]. Since there has been extensive work on automotive engines in
the above-mentioned research areas, it should be extended into the commercial aircraft engine
designs. Therefore, to make the air breathing engines more efficient on fuel consumption and
power generation, it is high time that air breathing engines are designed to inject small per-
centage of hydrogen to make the combustion more efficient. Some of the research is already
been carried out in the power generation sector where dry low NOx (DLN) hydrogen com-
bustion has been investigated [4], which has also helped in the reduction of NOx emissions.
This research can also help reduce NOx emissions as well as the carbon emissions and must
be extensively investigated to analyze the effects of the blend on the emissions and engine
performance. Numerical and computational studies have also been performed aimed at hy-
personic vehicles with particular applications to scramjets [5] using hydrogen as a working
fluid in the combustor. Due to the novel idea and proprietary nature of the studies performed
in the area of air breathing engines, as well as defense applications, most papers for references
have not been accessible to the author for further referencing.

Academia Letters, April 2021 ©2021 by the author — Open Access — Distributed under CC BY 4.0

Corresponding Author: Muzammil Arshad, marshad@tamu.edu


Citation: Arshad, M. (2021). Hydrogen Injection in Air Breathing Engines for Better Efficiency. Academia
Letters, Article 646.

1
Methodology
The bigger problem to solve is to safely carry hydrogen onboard an aircraft. It could be solved
by two ways; either by carrying liquid hydrogen (LH2 ) as carried by rockets or carrying water
on the aircraft. Both problems can be solved easily due to the lightweight materials now used
to manufacture the latest aircraft. Since a very small amount of hydrogen is needed to inject
into the air-fuel mixture (on the order of 1-3%), a small hydrogen tank will be sufficient. In-
vestigation of various percentages of hydrogen injection with respect to engine rpm, power
requirement and flight altitude along with the required temperature changes can provide opti-
mum percentages of hydrogen needed for the particular setting and engine environment. The
other solution could be to carry water in a water tank. The water in the tank goes through the
process of electrolysis to produce hydrogen.

Either ways, it is not impossible to inculcate hydrogen as a secondary fuel into the combus-
tion process on an air breathing engine. The benefits of hydrogen injection will be immense
in terms of better combustion and thermal efficiencies as well as reduced carbon emissions.
This will provide better fuel consumption and fuel economy leading to saving money by the
airlines. At the same time, due to reduced emissions, it will environment friendly which is
very relevant especially at a time when climate change is happening at a rapid pace. This
technology can also be gelled up in the latest supersonic commercial aircraft development
process as well.

Conclusion
Apart from the modifications suggested to the present air breathing engines, the new genera-
tion of air breathing engines can be designed with hydrogen injection nozzles designed inside
the engine along with safe storage of hydrogen onboard an aircraft. All of this is possible with
few modifications of the engine design. Since a larger amount of hydrogen has been safely
carried by rockets and shuttles as a fuel during space flights, it should not be a problem to
design a safe system to be carried on the aircrafts themselves. It is therefore recommended
to work extensively on the experimental and computational studies to achieve this rather easy
feat for the next generation of commercial flights which will help with lesser fuel consumption
and carbon emissions. With US now joining the Paris climate agreement, this would become

Academia Letters, April 2021 ©2021 by the author — Open Access — Distributed under CC BY 4.0

Corresponding Author: Muzammil Arshad, marshad@tamu.edu


Citation: Arshad, M. (2021). Hydrogen Injection in Air Breathing Engines for Better Efficiency. Academia
Letters, Article 646.

2
a better alternative for air breathing engines. The new age of air travel should benefit the air-
craft companies and customers both in terms of cost of air travel as well as the time of flight
to the destination.

References
1. Arshad, M.,(2020). Numerical Simulations and Validation of Engine Performance Pa-
rameter in Direct Injection Spark Ignition (DISI) Engines using Detailed Chemical
Kinetics, ASME 2020 International Mechanical Engineering Congress & Exposition
(IMECE), Virtual Conference, November 2020, IMECE2020-24683.

2. Arshad, M., Micklow, G.J., (2017). Analysis of Hydrogen Enrichment in Gasoline Fu-
eled Premixed Spar-Ignition Engine, Journal of Multidisciplinary Engineering Science
and Technology, Vol. 4, Issue 9, pp. 8256-8264.

3. Arshad, M.,Micklow, G.J., (2019). Parametric Analysis of a Gasoline Fueled Premixed


Spark-Ignition (SI) Race Car Engine by using Methanol and Methanol-Water Blends,
Journal of Multidisciplinary Engineering Science and Technology, Vol. 6, Issue 6, pp.
10206-10215.

4. Funke, H.H.W., Keinz, J., Kusterer, K., Ayed, A.H., Kazari, M., Kitajima, J., Horikawa,
A., Okada, K., (2017). Experimental and Numerical Study on Optimizing the Dry
Low NOx Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Ap-
plications, Journal of Thermal Science and Engineering Applications. 9(2), doi.org/
10.1115/1.4034849.

5. Gugulothu, S.K., (2019). Significance of Fluid Flow Characteristics in the Hydrogen-


Fuelled Scramjet Combustor using Flame Stabilisation Analysis, Australian Journal of
Mechanical Engineering, Vol. 13, No. 2, DOI: 10.1080/14484846.2019.1601064.

Academia Letters, April 2021 ©2021 by the author — Open Access — Distributed under CC BY 4.0

Corresponding Author: Muzammil Arshad, marshad@tamu.edu


Citation: Arshad, M. (2021). Hydrogen Injection in Air Breathing Engines for Better Efficiency. Academia
Letters, Article 646.

You might also like