Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    6ES71316BF000DA0 Datasheet en

    Uploaded by

    mario
    The document provides information about the SIMATIC ET 200SP digital input module DI 8x 24 V DC High Speed. Key details include: - It has 8 digital inputs that support 24V DC and operates in DI, counter, or oversampling modes. - It supports firmware updates and I&M functions. Compatible base units are BU type A0. - Operating modes include DI, 4 counters up to 10 kHz each, and oversampling up to 32 values per cycle at 7.8125 μs resolution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6ES71316BF000DA0 Datasheet en

    Uploaded by

    mario
    10 views3 pages
    The document provides information about the SIMATIC ET 200SP digital input module DI 8x 24 V DC High Speed. Key details include: - It has 8 digital inputs that support 24V DC and operates in DI, counter, or oversampling modes. - It supports firmware updates and I&M functions. Compatible base units are BU type A0. - Operating modes include DI, 4 counters up to 10 kHz each, and oversampling up to 32 values per cycle at 7.8125 μs resolution.

    Original Title

    6ES71316BF000DA0_datasheet_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about the SIMATIC ET 200SP digital input module DI 8x 24 V DC High Speed. Key details include: - It has 8 digital inputs that support 24V DC and operates in DI, counter, or oversampling modes. - It supports firmware updates and I&M functions. Compatible base units are BU type A0. - Operating modes include DI, 4 counters up to 10 kHz each, and oversampling up to 32 values per cycle at 7.8125 μs resolution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views3 pages

    6ES71316BF000DA0 Datasheet en

    Uploaded by

    mario
    The document provides information about the SIMATIC ET 200SP digital input module DI 8x 24 V DC High Speed. Key details include: - It has 8 digital inputs that support 24V DC and operates in DI, counter, or oversampling modes. - It supports firmware updates and I&M functions. Compatible base units are BU type A0. - Operating modes include DI, 4 counters up to 10 kHz each, and oversampling up to 32 values per cycle at 7.8125 μs resolution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data sheet 6ES7131-6BF00-0DA0

    SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack


    quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters,
    suitable for BU type A0, Color code CC01

    General information
    Product type designation DI 8x24 V DC HS
    HW functional status from FS04
    Firmware version V1.0.2
    ● FW update possible Yes
    usable BaseUnits BU type A0
    Color code for module-specific color identification plate CC01
    Product function
    ● I&M data Yes; I&M0 to I&M3
    ● Isochronous mode Yes
    Engineering with
    ● STEP 7 TIA Portal configurable/integrated from version V13 SP1
    ● STEP 7 configurable/integrated from version V5.5 SP3 / -
    ● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
    ● PROFINET from GSD version/GSD revision GSDML V2.3
    Operating mode
    ● DI Yes
    ● Counter Yes
    ● Oversampling Yes
    ● MSI No
    Supply voltage
    Rated value (DC) 24 V
    permissible range, lower limit (DC) 19.2 V
    permissible range, upper limit (DC) 28.8 V
    Reverse polarity protection Yes
    Input current
    Current consumption, max. 70 mA; without sensor supply
    Encoder supply
    24 V encoder supply
    ● 24 V Yes
    ● Short-circuit protection Yes; per module, electronic
    ● Output current, max. 700 mA
    Power loss
    Power loss, typ. 1.5 W
    Address area
    Address space per module
    ● Address space per module, max. 45 byte
    ● Inputs 32 byte; 1 byte + 1 byte for QI information in DI mode; 32 bytes in
    Oversampling mode; 25 bytes in Counter mode
    ● Outputs 20 byte; In count mode

    6ES71316BF000DA0 Subject to change without notice


    12/20/2023
    Page 1/3 © Copyright Siemens
    Hardware configuration
    Automatic encoding Yes
    ● Mechanical coding element Yes
    ● Type of mechanical coding element Type A
    Selection of BaseUnit for connection variants
    ● 1-wire connection BU type A0
    ● 2-wire connection BU type A0
    ● 3-wire connection BU type A0 with AUX terminals
    ● 4-wire connection BU type A0 + external terminals
    Digital inputs
    Number of digital inputs 8
    Source/sink input P-reading
    Pulse extension Yes
    ● Length 2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
    Digital input functions, parameterizable
    ● Gate start/stop Yes
    ● Freely usable digital input Yes
    ● Counter Yes
    — Number, max. 4
    — Counting frequency, max. 10 kHz
    — Counting width 32 bit
    — Counting direction up/down Yes
    ● Digital input with oversampling Yes
    — Number, max. 8
    — Values per cycle, max. 32
    — Resolution, min. 7.8125 µs
    Input voltage
    ● Rated value (DC) 24 V
    ● for signal "0" -30 to +5 V
    ● for signal "1" +11 to +30V
    Input current
    ● for signal "1", typ. 6 mA
    Input delay (for rated value of input voltage)
    for standard inputs
    — parameterizable Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
    for interrupt inputs
    — parameterizable Yes
    for technological functions
    — parameterizable Yes
    Cable length
    ● shielded, max. 50 m
    ● unshielded, max. 50 m
    Encoder
    Connectable encoders
    ● 2-wire sensor Yes
    — permissible quiescent current (2-wire sensor), max. 1.5 mA
    Isochronous mode
    Bus cycle time (TDP), min. 125 µs
    Jitter, max. 5 µs
    Interrupts/diagnostics/status information
    Diagnostics function Yes
    Alarms
    ● Diagnostic alarm Yes
    ● Hardware interrupt Yes
    Diagnoses
    ● Diagnostic information readable Yes
    ● Monitoring the supply voltage Yes
    — parameterizable Yes
    ● Monitoring of encoder power supply Yes; Module-wise
    ● Wire-break No

    6ES71316BF000DA0 Subject to change without notice


    12/20/2023
    Page 2/3 © Copyright Siemens
    ● Short-circuit Yes; Module-wise
    Diagnostics indication LED
    ● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
    ● Channel status display Yes; green LED
    ● for channel diagnostics No
    ● for module diagnostics Yes; green/red DIAG LED
    Potential separation
    Potential separation channels
    ● between the channels No
    ● between the channels and backplane bus Yes
    ● between the channels and the power supply of the No
    electronics
    Isolation
    Isolation tested with 707 V DC (type test)
    Standards, approvals, certificates
    Suitable for safety functions No
    Ambient conditions
    Ambient temperature during operation
    ● horizontal installation, min. -30 °C; < 0 °C as of FS04
    ● horizontal installation, max. 60 °C
    ● vertical installation, min. -30 °C; < 0 °C as of FS04
    ● vertical installation, max. 50 °C
    Altitude during operation relating to sea level
    ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
    Dimensions
    Width 15 mm
    Height 73 mm
    Depth 58 mm
    Weights
    Weight, approx. 28 g

    last modified: 8/16/2023

    6ES71316BF000DA0 Subject to change without notice


    12/20/2023
    Page 3/3 © Copyright Siemens

    You might also like