Original 2887057

CA Bayonet / VG95234
Connectors
Proven Quality, Reliability & Expertise
ITT’s Cannon brand is a leading global manufacturer of connector
products serving international customers in the aerospace and defense,
medical, energy, transportation and industrial end markets.
Whether delivering critical specs to aircraft pilots, streaming data through
communications satellites or giving expectant parents a first look at their
unborn children, Cannon connects the world’s most important information
to the people who need it.
About ITT
In 2015, Cannon celebrated 100 years that helped
ITT is a diversified leading manufacturer of highly engineered
make history. Cannon products were used in the first
critical components and customized technology solutions for
“talking” movies and helped transmit the first messages
the energy, transportation and industrial markets. Building on
home from the moon. Today we proudly continue our
its heritage of innovation, ITT partners with its customers to
legacy of innovating to connect the world and inspire the
deliver enduring solutions to the key industries that underpin
successes of the next century – because amazing
our modern way of life.
things happen when great things connect.
Founded in 1920, ITT is headquartered in Stamford,
Connecticut, with employees in more than 35 countries and
sales in a total of approximately 125 countries. For more
information, visit itt.com.
Dimensions shown in mm
Specifications and dimensions subject to change
ittcannon.com
2
lndustrial / lnstrumentation
Rail
Defense Vehicles
Oil & Gas
Medical
Commercial & Military Aerospace
Our connector portfolio remains

the most extensive in the industry.
Heavy Equipment Offering a reliable and cost effective range of
interconnect solutions.
ittcannon.com
3
Introduction to CAB/VG95234
Cannon CA Bayonet series was designed in accordance with the VG95234
specification. This versatile and highly reliable connector series is an
improvement on the well established MIL-C-5015 series. CA-Bayonet
has a proven “reverse bayonet” coupling design that offers exceptional
vibration protection, by a simple 120° turn.
Initially designed for aircraft and airborne applications, VG & commercial offering
these rugged connectors are used in the electrical equip-
– Connector offering according VG95234 standard – fully
ment of various off-road vehicles, construction machinery,
approved VG portfolio as required for military applications
industrial devices, railroad and military vehicles.
– Extended offering of additional connector versions and
Advantages endbell solutions for typical industrial applications
– Rugged shell design Contact offering
– Waterproof up to IP68, (10 meters / 35 feet or 1 bar for – Contacts provide at least 500 mating cycles
16 h) and IP69k (water jet) – Contacts available as crimp, solder or PCB versions
– Environmental protection – Gold plated contacts available for low current applications
– Bayonet coupling for easy mating and unmating – Crimp and assembly tooling available for all contact sizes
– Vibration proof Environmental protection
Cannon has the complete VG95234 program available and, – Cadmium as standard, high performance plating
in addition, many other types which exceed the requirements 500h / 5 days cyclic salt spray, highly conductive
of VG95234 and MIL-C-5015. – Cadmium & ChromVI free alternatives for RoHS applications
≥ SnZn Matt Grey A241 plating, VG approved “J” plating,
Attention 500h / 5 days cyclic salt spray, highly conductive.
Metal shell connectors which may be accessed are not suitable The 1:1 VG Cadmium replacement
for mains power. ≥ ZnNi Blue grey A240 plating for 500h salt spray
resistance and highly conductive
Connector Design & Features ≥ ZnCo Black A232 plating, for 200h salt spray
Robust design resistance, conductive
– Rugged aluminium shell for most severe conditions ≥ ZnCo Green A233 plating, for 200h salt spray
resistance and highly conductive
– Bayonet coupling with rigid stainless steel roller bolts for
fast and reliable mating (min. 500 cycles) – IP67 pressure water & IP69k water jet sealing
– An audible sound and a colour-marked snap-in position Environmental protection
ensure additional coupling security – Made of high quality polychloroprene for temperature
Robust design range - 55/125°C (-67/+257°F)
– Over 140 arrangements and 12 connector sizes available – Material is self-extinguishing
for 1 to 65 circuits – Resistant against hydraulic fluids, jet fuel, diesel fuel,
– Wide selection of end bells for individual wires & gasoline, lubricants, brake and fire extinguisher fluids
jacketed cables
– Choice of accessories e.g. seals, gaskets, dust caps,
wire hole fillers
ittcannon.com
4
Table of Contents
Proven Quality, Reliability & Expertise...... 2-3
Introduction to CAB/VG95234........................ 4
VG/CA Bayonet
Technical Data.......................................................... 6
Mechanical Features................................................. 7
Mounting Holes & Dimension ............................... 8-9
How to Order .................................................. 10-12
Contact Arrangements ..................................... 13-26
Connector Dimensions...................................... 27-43
Coupling Dimensions........................................ 44-47
CAB IP69K
General Information .............................................. 48
How to Order ....................................................... 49
Connector Dimensions .......................................... 50
Accessories................................................ 52-64
Tool............................................................... 65-66
Part Number Search................................ 67-68
Product Safety Information.......................... 70
ittcannon.com
5
VG/CA Bayonet
Technical Data Contact resistance
Contact rating at 20 °C (+68 °F) acc. to VG95234 (Millivolt test)
The contact resistance has to be tested according to VG95234
Max. current part 2, test no. 5.10.1 and VG 95210, part 37.
Contact size
A
10 8 Contact size Max. contact resistance
AWG
16S/15S 22 Metric mΩ
16/15 22 10 – 12
12/25 41 15S/15 16S/16 6
8/60/100 74 25 12 3
4/160 135 60/100 8 1
0/500 245 160 4 0,5

500 0 0,2
Current rating
Reference values based on measurements from a single pair Insulation resistance
of contacts. Acc. to VG95319, p art 2, t est no. 5.12 and VG95210, p
art 32,
test condition B
Derating Curves according to VG 95234 Standard insulator material > 1000 MΩ

240 FKM insulator material (upon request) > 5000 MΩ
220
200
180
Test voltage
160 Acc. to VG95319, p art 2, test no. 5.13 and VG 95210, p
art 31
Current (A)
140
120 Test voltage for service rating:
100
80
60 Service rating Test voltage Vrms
40
20 Instruments 1050
0
20 30 40 50 60 70 80 90 100 110 120 130
A 1600
Ambient Temperature (OC) B 4500
Contact size 500/0, wire size 50mm2/AWG0 Contact size 25/12, wire size 2,5mm2/AWG12 D 2500
Contact size 160/4, wire size 16mm2/AWG4 Contact size 15/15S/16/16S, wire size 1,5mm2/
Contact size 60/100/8, wire size 6/10mm2/ AWG16 E 3000
AWG8 Contact size 10/20, wire size 0,75/1,0mm2
Air and creepage paths (min.)

Derating Curves - ITT Cannon
320 Voltage class Instr. A D E
300
280
260 Air and creepage paths mm 0,7 1,1 2,8 4,8
240
220
200
Operating voltage and connector usage
Current (A)
180
160
140
Operating voltage for CA Bayonet / VG95234 connectors is
120
100
limited to 50VAC / 75VDC according to the safety regulations
80 defined in the European Low Voltage Directive (LVD) 2014/35/EU.
60
40
20 For other uses or regions please see appropriate
0
20 30 40 50 60 70 80 90 100 110 120 130 regional regulations.
Ambient Temperature (OC)
Contact size 500, wire size 50mm2 Contact size 100, wire size 10mm2
Contact size 160, wire size 16mm2 Contact size 60, wire size 6mm2
ittcannon.com
6
Mechanical Features Coupling torque
Ambient temperature The allowable coupling torques have to be tested under full bundle
Standard insulator material conditions of the connectors to VG95319, part 2, test no. 5.8.2.
–55°/125°C (– 67/257°F)
Allowable coupling torque
Shell Size Opening Nm min.
FKM insulator material* closing and opening Nm max.
–30°/200°C (– 22/392°F) 10SL 1,7 0,15
12S 2,5 0,23
Safety provisions**
14S 3,6 0,35
In mated condition 16S/16 5,5 0,46
General (all connectors): 18 8 0,58
IP67 acc. to ISO20653 20 9 0,7
22 11 0,8
VG 95234 Connectors:
24 14 0,8
1 bar for 16h
28 17 0,92
IP69K Version Connectors: 32 19 1,03
Plug with Universal Endbell and receptacle with o-ring 36 23 1,03
IP68 (1bar for 16h); IP69K (Jet water sealed) acc. to ISO20653
Contact retention
Vibration test
The contact retention has to be tested according to VG95319,
200 m/s2 at 10 to 2000 Hz
part 2, test no. 5.4. Test force direction = Mating direction.
Mating cycles
500 min. Contact size AWG
Test force
N
Withdrawal force per contact 10 – 30
The corresponding separating force has to be measured 15S/15 16S/16 35
according to VG95319, part 2, test no. 5.7. using the required 25 12 55
test gage and DIN EN60512-16-5. 60/100 8 80
160 4 90
500 0 95
Contact size Separating force min w
AWG
Metric N Gage
10 – 0,3 G 0,99 Materials
15S/15 16S/16 1,0 G 1,56 Shell - Aluminum alloy
25 12 1,5 G 2,36 Standard finishes
60/100 8 3,0 G 3,58
Cadmium (A66), VG approved, 500h / 5 days cyclic salt spray,
160 4 4,0 G 5,69 highly conductive
500 0 8,5 G 9,04 SnZn Matt Grey (A241), VG approved, 500h / 5 days cyclic
salt spray, highly conductive
ZnNi blue grey (A240) RoHS, 500h salt spray, highly conductive
Gauge ZnCo black (A232) RoHS, 200h salt spray, conductive
(see also VG95234, Part 1) ZnCo green (A233) RoHS, 200h salt spray, highly conductive
Insulator and grommets
Polychloroprene (Standard)
FKM (High temperature)
Contacts - Copper alloy
Contact diameter d L
Standard finish - Hard silver
Gauge Special finish - A176 nickel and hard gold plating
+0,01 –1
G 0,99 0,99 7 * consult factory for availability
G 1,56 1,56 9 ** Longitudinal sealing: The connector is not sealed against fluids entering through
G 2,36 2,36 12 the cable, as the sealing lips of the single wire sealing are pressing against the
G 3,58 3,58 13 jacket of the individual conductors.
G 5,69 5,69 13 Only solutions as PG or ME adapters as well as universal endbell provide for
longitudinal sealing provided that both ends of the cable are sealed correctly.
G 9,04 9,04 13
ittcannon.com
7
Mounting Holes
Mounting holes for wall mounting receptacles style A, B1, B2,
C1, C2, J1, J2, N1 and N2 acc. to VG95234, or CA 3100E/F/R-B
and CA 3102 E-B.
Shell size ø d1 (H12*) ø d2 (H13*) E Screws to be used
Style A Style B1, B2 Style Style A, B2, C2, J2, B1, C1, J1, N
CA 3102E-B C1, C2, J1, J2 A, B2, C2, B1, C1, J1, N1 ±0,15 N2 CA 3100E, F
N1, N2 J2, N2 CA 3100E, F, R-B CA-B-Mod. 05
CA 3100E, F, R-B CA-B
Mod-05
10SL 16,4 18,5 3,4 4,5 18,2 M3...ISO 1580 M4...ISO 1207
12S 16,4 21,7 3,4 4,5 20,6 M3...ISO 1580 M4...ISO 1207
14S 19,7 24,9 3,4 4,5 23,0 M3...ISO 1580 M4...ISO 1207
16S 22,9 27,7 3,4 4,5 24,6 M3...ISO 1580 M4...ISO 1207
16 22,9 27,7 3,4 4,5 24,6 M3...ISO 1580 M4...ISO 1207
18 26,1 31,1 3,4 4,5 27,0 M3...ISO 1580 M4...ISO 1207
20 29,5 34,5 3,4 4,5 29,4 M3...ISO 1580 M4...ISO 1207
22 32,7 37,8 3,4 4,5 31,8 M3...ISO 1580 M4...ISO 1207
24 36,0 41,3 3,9 4,5 34,9 M3,5...ISO 1580 M4...ISO 1207
28 42,0 47,1 3,9 5,5 39,7 M3,5...ISO 1580 M5...ISO 1207
32 48,3 53,8 4,5 5,5 44,5 M4...ISO 1580 M5...ISO 1207
36 54,6 60,0 4,5 5,5 49,2 M4...ISO 1580 M5...ISO 1207
When used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head.
*Drilling tolerances according to DIN ISO 286.
Harnessing Wire Stripping

VG95234 connectors are designed for single wire harnessing. Either mechanical or hot stripping can be used. Prevent conductor
Full sealing will be guaranteed only by using wires in accordance or insulator damage. For solder contacts, conductors have to
with MIL-W-5086, LN 9251 (for AWG) and VG 95218-20 and be pretinned.
TL 6145-011 (for metric wires). All other wires have to conform
Note: Do not twist conductors used with crimp contacts.
to wire and insulation diameters with the data given in the
Do not touch uninsulated conductors before crimping.
following table:
Twisting of conductors and grease or lubricants on the wires
cause poor crimp quality.
Contact size Crimp and solder contacts Insulation Ø
AWG Metric AWG Metric AWG Metric
mm mm2 mm
Contact size Stripping length
– 10 – 0,75-1,0 – 1,45-2,5 AWG Metric mm
16S/16 15S/15 16 0,75-1,5 1,6-2,8 1,60-2,8 – 10 6.0 + 0,5
12 25 12 2,5 2,9-3,5 2,9-3,5 16S/16 15S/15 6,0 + 0,5
– 60 – 6,0 – 3,5-4,9 12 25 6,0 + 0,5
8 100 8 10,0 4,2-5,8 5,5-6,5 8 60/100 11,0 + 0,8 – 0,4
4 160 4 16,0 6,2-9,0 7,1-9,0 4 160 11,0 + 0,8 – 0,4
0 500 0 50,0 10,5-13,0 10,5-13,0 0 500 13,0 + 0,8 – 0,4
ittcannon.com
8
Separating and Mounting Dimensions
When using connectors according to VG95234 the below mentioned installation dimensions have to be met.
Connector style D or Connector style E, E1 and K or

CA3106E-B and CA3106F-B CA3106F-B-13/-14/-15 CA3108E/F-B and CA3108F-B-13/-14/-15
Connector style G, M, R1 or CA3106E-B-02/-03/-06 Connector style G, M, R1or CA3106E-B-02/-03/-06
CA3106E-B-13/-14/-15 and CA3106E-B-32 with shrink CA3106E-B-32 with shrink boot 90° acc. to VG 95343
boot, straight,acc. VG95343
L1 L2 L4
L3 L5 L6
Shell size (D) (G/M) (G/M) R1
min. max max
min. min. min. +10 mm
10SL 70 70 70 65 75 8,0 3,5

12S 70 75 75 70 80 8,0 3,5
14S 70 75 75 70 80 8,0 3,5
16S 70 90 80 80 90 8,0 3,5
16 80 100 90 90 100 6,5 3,5
18 90 100 90 90 100 8,0 3,5
20 90 100 95 100 110 8,0 3,5
22 90 100 95 100 110 8,0 3,5
24 110 120 105 110 120 8,0 5,0
28 110 120 105 110 120 9,0 5,0
32 110 180 115 120 130 9,0 6,0
36 110 190 120 130 140 9,0 6,0
ittcannon.com
9
How to order
VG Order reference
VG95234 A – 32–6 S 1 N 1 J
Series
Shell style
Dash
Shell size
Contact arrangement
Contact type
Contact termination
Insulator position
With / without contacts
Plating
Explanation
Series Important!
VG95234 VG contact arrangements are restricted. Only those
Shell style layouts listed in VG95234 standard are allowed. See the
J1, J2, N1, N2, S1, U1, U2 – wall mounting receptacle following pages for VG permitted layouts and contact
F, V – c able connection receptacle arrangements.
A, B1, B2 – box mounting receptacle Further details about contact terminations / wire ranges
C1, C2 – bulkhead receptacle can be found on pages 62-64.
D, G, H, L, M, R1, T – s traight plug
E, E1, K – p lug 90°
Shell size Accessories acc. to VG
10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 32 and 36 Dummy receptacles VG95234 BOD
Gaskets, front mount VG95234 DA
Contact arrangement
Gaskets, rear mount VG95234 DH
See pages 13 to 26
Protecting caps VG95234 KR
Contact type Protecting caps VG95234 KB
P – Pin contact Cable clamps VG95234 KK
S – Socket contact Bushing VG95234 KT
Contact termination
Without identification = metric crimp contacts
Identification ‘1’ = AWG crimp contacts
Identification ‘2’ = mixed AWG and metric crimp contacts
Insulator position
Positions N, X, Y allowed only, see details on ‘contact
arrangement’ pages 13-26
With / without contacts
Without identification = with crimp contacts
Identification ‘1’ = without crimp contacts, to be ordered
separately
Plating
Without identification = cadmium
Identification “J” = RoHS, matt grey, SnZn plating, VG
approved, VG 1:1 Cadmium replacement
ittcannon.com
10
How to order
Cannon Order reference
CA 3106 E 18– 1 S X B – ***
Series
Shell style
Class
Shell size
Contact arrangement
Contact type
Insulator position
Connectors with bayonet coupling
Dash
Modification
Explanation
Series
CA – Circular connectors with bayonet coupling
Shell style
3100 – Wall mounting receptacle
3101 – Cable connecting receptacle
3102 – Box mounting receptacle
3105 – Dummy receptacle for front and panel mounting
3106 – Plug, straight
3108 – Plug, 90°
TBF – Bulkhead receptacle
Class
E – environmental with resilient insulators and endbell with
clamp and bushing
F – environmental with resilient insulator and endbell for flex tube
R – environmental with resilient insulator and shortened
light-weight endbell without cable clamp
Shell size
10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24, 28, 32 and 36
Contact arrangement
See pages 13 to 26
Contact type
P – Pin
S – Socket
PS – one side pin, one side socket (only for TBF)
Insulator position
Besides the normal position further insulator positions are
possible for Cannon connectors (see page 13-26) to prevent
mismating. Polarization is achieved by turning the pin contact
insulator clockwise towards the shell, the socket insulator,
however, in opposite clockwise direction. This information refers
to the mating side of the contact insulator. For special insert
alternations of standard inserts see page 24.
Modification
see page 12
ittcannon.com
11
Modifications With Spring Washer and Friction Ring
(only for CA......-B) These connectors feature a spring washer and a friction ring
01 – metric crimp contacts under the coupling nut.
02 – adapter for heat shrink boots AWG crimp contacts
Advantage
03 – adapter for heat shrink boots, metric crimp contacts
Improved resistance to vibration
04 – rear mount, thread holes in flange, metric crimp
contacts (CA3102 only) How to order
05 – rear mount, through holes in flange, (CA3100, CA Delete “31” from standard part number and then insert “W”
3102, rear mounting CA 20, TBF) after Class E, F or R.
06 – adaptor for heat shrink boots, solder pot contacts Example: CA06EW10SL-3P-B-14
08 – angular endbell, thread holes in flange (for CA3100 only)
09 – angular endbell, through holes in flange (for CA3100 The connectors acc. to VG95234 are generally delivered with
only) spring washer.
13 – shielded version, solder pot contacts
14 – shielded version, metric crimp contacts Additional Connector Options
15 – shielded version, AWG crimp contacts CA3100E-B-02/03/06
32 – shielded version, reduced cable entry diameter Adapter for heat shrink boot
41 – grounding spring on barrel
CA3100E-B-13/14/15
109 – F80 contacts, rear mount, thread holes in flange (for
Adapter for shielded cables
CA3102 only)
111 – rear mount, thread holes in flange (CA3102 only), CA02L-B
solder pot contacts Receptacle with PCB solder contacts
F80 – AWG crimp contacts CA20L-B
A176 – gold plated contact, see pages 59-60 Rear mount receptacle with PCB solder contacts
A232 – Zinc cobalt black plating
A233 – Zinc cobalt green plating CA06EH*
A240 – Zinc Nickel plating, blue grey plating H stands for High temperature FKM insulator and sealing material
A241 – Tin Zinc matt grey plating, VG approved CA07A-B
F42 – less grommet and backshell Jam nut receptacle
F0 – less contacts, contacts to be o rdered separately,
CA00EP-B-TL*
see page 61
TINEL-LOCK adapter
Default for any CA Bayonet connector is solder cup contacts. CA06EW-B-TLXX*
Unless one of the contact modification codes listed above is TINEL-LOCK adapter
used the connectors will be supplied with solder cup contacts.
CA06PG/ME
PG or Metric gland adapter
Important! CA00DT...Dxx, CA01DT...Dxx, CA06DT...Dxx
VG contact arrangements are restricted. Only those Shielded banding adapter for heat shrink boot
layouts listed in VG95234 standard are allowed. See and grommet seal
the following pages for VG permitted layouts and
CA02X..., CA06X...Dxx
contact arrangements.
IP69k Environmentally sealed CA Bayonet version
Further details about contact terminations / wire ranges
*Consult factory for availability
can be found on pages 62-64.
ittcannon.com
12
Contact Arrangements
Insulator
Contact arrangement
View on Mating face No. of Service Insulator position* Special (g) including
Contact size Position
of Pin Insulator Contacts rating N V W X Y Z polarization contacts
VG CA
Pin Socket
10SL-3 10SL-3
3 A 0 – – – – – – – 6 9
15S 16S
10SL-4 10SL-4
2 A 0 – – – – – – – 4 6
15S 16S
♦
12S-3
2 – A 0 100 70 145 215 290 – – 4 6
16S
12S-4
1 – D 0 – – – – – – – 3 4,5
16S
12SA10 3 110
4 – Instr. 0 – – – – – 6 8
16S 8 250
14S-1
3 – A 0 – – – – – – – 6 9
16S
14S-2
4 – Instr. 0 – – 120 240 – – – 7 11
16S
14S-4
1
– 16S D 0 – – – – – – – 4 7
14S-5
5 – Instr. 0 – – 110 – – – – 9 13
16S
14S-6 14S-6
6 Instr. 0 – – – – – – – 11 15
15S 16S
♦
14S-7 14S-7
3 A 0 – 90 180 270 – – 6 9
15S 16S
14S-9
2 Instr. 0 – 70 145 215 290 – – 5 18
– 16S
14SA7
7 Instr. 0 – – – – – – – 10 15
– 16S
♦
16S-1 16S-1
7 A 0 – 80 – – 280 – – 4 19
15S 16S
16S-4 16S-4
2 D 0 – 35 110 250 325 – – 7 10
15S 16S
♦
16S-5
3 – A 0 – 70 145 215 290 – – 8 12
16S
16S-8
5 – A 0 – – 170 265 – – – 10 15
16S
♦ Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
* Attention: Connectors according to VG95234 are generally available with insert positions X and Y only.
ittcannon.com
13
Insulator
Contact arrangement
VG CA
Pin Socket
3 16-7 16-7
2 15 16 A 0 – 80 110 250 280 – – 16 25
1 100 8
4 16-9
2 12 A 0 – 35 110 250 325 – – 13 20
–
2 16
♦ 16-10 16-10
3 A 0 – 90 180 270 – – – 17 24
25 12
16-11
2 – A 0 – 35 110 250 325 – – 11 17
12
16-12 16-12
1 A 0 – – – – – – – 24 28
160 4
16A11
16A11
2 25 (socket) A 0 – 35 110 250 325 – – 11 17
12
25A (pin) short
♦ 18-1 18-1
A (B, C,
10 F, G) Instr. 0 – 70 145 215* 290 – – 24 37
15 16
(all others)
18-3
2 – D 0 – 35 110 250 325 – – 13 22
12
18-4
4 – D 0 – 35 110 250 325 – – 19 30
16
3 18-5
2 – 12 D 0 – 80 110 250 280 – – 15 25
1 16
18-6
1 – D 0 – – – – – – – 24 32
4
18-7
1 D 0 – – – – – – – 16 25
– 8
8 18-8
1 12 A 0 – 70 – – 290 – – 18 30
–
7 16
7 18-9 18-9
2 25 12 Instr. 0 – 80 110 250 280 – – 18 30
5 15 16
18-10
4 A 0 – – 120 240 – – – 13 22
– 12
18-11 18-11
5 A 0 – – 170 265 – – – 31 40
25 12
18-12
6 – A 0 – 80 – – 280 – – 15 25
16
Caution: This insulator rotation is not recommended as it can mate with normal rotation connectors.
ittcannon.com
14
Insulator
Contact arrangement
VG CA
Pin Socket
♦ 4 18-13 18-13
1 60 8 A 0 – 80 110 250 280 – – 15 24
3 25 12
7 18-17
2 – 12 Instr. 0 – – – – – 12 100 15 23
5 16
18-19
10 – A 0 – – 120 240 – – – 19 31
16
18-20 25
5 – A 0 – 90 180 270 – – 15
16
18-21
3 – A 0 – – – – – – – 17 28
12
18-22
3 – D 0 – 70 145 215 290 – – 10 20
16
20-2 20-2
1 D 0 – – – – – – – 46 55
500 0
20-3
3 – D 0 – 70 145 215 290 – – 28 42
12
20-4 250
4 – D 0 – 45 110 250 – – 24 40
12 (20A37)
20-6
3 – D 0 – – – – – – – 22 36
16
A (C, D, E,
20-7
8 F) D (A, B, 0 – 80 110 250 280 – – 28 42
– 16
H, G)
6 20-8 20-8
2 100 8 Instr. 0 – 80 110 250 280 – – 37 49
4 15 16
20-11
13 – Instr. 0 – – – – – – – 25 41
16
5 20-14
–
3 12 A 0 – 80 110 250 280 – – 22 39
2 8
20-15
7 – A 0 – 80 – – 280 – – 27 46
12
9 20-16
2 12 A 0 – 80 110 250 280 – 19
– – 32
7 16
6 20-17
5 5 12 A 0 – 90 180 270 – – – 20 33
–
1 1 16
ittcannon.com
15
Insulator
Contact arrangement
VG CA
Pin Socket
9 20-18
3 – 12 A – – 35 110 250 325 – – 19 32
6 16
20-19
3 – A 0 – 90 180 270 – – – 33 46
8
6 20-22 20-22
♦ ♦
3 15 8 A – – 80 280 – – 37 49
110 250
3 8 16
20-23
2 – A – – 35 110 250 325 – – 25 35
8
4 20-24
2 – 8 A 0 – 35 110 250 325 – – 40 53
2 16
20-27
14 – A 0 – 35 110 250 325 – – 26 42
16
20-29 47
17 – A 0 – 80 – – 280 – – 29
16
2 260
20-33 38
11 – A 0 – – – – 3 110 – 23
16
17 130
20A9 20A9 Instr.

9 0 – – 110 250 – – – 21 35
25 12 (all others)
20A24
24 – – 0 – – – – – – – 42 58
20
20A48 20A48
19 Instr. 0 – – 80 280 – – – 30 50
15 16
22-1
2 – D 0 – 35 110 250 325 – – 28 42
8
22-2 22-2
3 D 0 – 70 145 215 290 – – 35 50
8 8
4 22-4
2 – 8 A – – 5 110 250 325 – – 48
34
2 12
6 22-5
2 – 12 D – – 35 110 250 325 – – 23 38
4 16
22-7
1 – E 0 – – – – – – – 45 57
0
ittcannon.com
16
Insulator
Contact arrangement
VG CA
Pin Socket
22-8
2 – E – – 35 110 250 325 – 18 28
12
22-9
3 – E 0 – 70 145 215 290 – – 21 32
12
22-10
4 – E – – 35 110 250 325 – – 17 31
16
5 22-12 22-12
2 100 8 D 0 – 80 110 250 280 – – 28 42
3 15 16
♦
22-14 22-14
19 A 0 – 80 – – 280 – – 30 50
15 16
6 22-15
A (A, B, C,
5 – 12 0 – 80 110 250 280 – – 30 50
E, F) E (D)
1 16
22-16
9 280
– 12 A 0 – 80 110 250 – – 28 45
3 –
16
22-19
14 – A 0 – 80 110 250 280 – – 28 47
16
9
22-20
6 – A 0 – 35 110 250 325 – – 22 39
16
3
3 22-21
280
2 – 16 A 0 – 80 110 250 – – 49 58
–
1 0
22-22 22-22
4 A 0 – – 110 250 – – – 42 58
100 8
D (H)
22-23
8 – A (all 0 – 35 – 250 – – – 54
12 34
others)
9 22-27 22-27
1 60 8 A (A to H) 0 – 80 – 250 280 – – 21 34
8 15 16
22-28
7 – – 80 – – 280 33 50
12 A – – –
22B22
4 – A 0 – – 110 250 – – – 42 58
60
24-2
7 – D 0 – 80 – – 280 – – 33 53
12
ittcannon.com
17
Contact arrangement Insulator
View on Mating face No. of Service Insulator position Special (g) including
VG CA Pin Socket
4 24-4
1 – 0 D – – 80 110 250 280 – – 51 63
3 16
24-5
16 A – – 80 110 250 280 – – 30 54
16
16 24-7
2 – 12 A 0 – 80 110 250 280 – – 65
45
14 16
24-9 24-9
2 A 0 – 35 110 250 325 – – 45 60
4 4
24-10 24-10
7 A 0 – 80 – – 280 – – 65 85
100 8
9 24-11 24-11
3 100/8 8 A 0 – 35 110 250 325 – – 55 75
14 25/12 12
5 24-12 24-12
2 4 4 A 0 – 80 110 250 280 – – 60 80
3 12 12
24-19
12 – A 0 – – – – – – – 28 47
16
11 24-20
2 – 12 D 0 – 80 110 250 280 – – 40 60
9 16
24-22
4 – D 0 – 45 110 250 – – 44 61
8
24-27
7 – E – – 80 – – 280 – – 21 37
16
24-28 24-28
24 Instr. 0 – 80 110 250 280 – – 40 65
15 16
– – – – – – 2 260
24A24 – – – – – – 4 80
12 – A 46 71
12 – – – – – – 9 280
– – – – – – 12 100
24A28
28 – – 65 146 235 – – – 42 75
– 16 Instr.
19 24A51
13 16
A – – – – – – 14 30 60 70
5 12
1 8
ittcannon.com
18
Insulator
Contact arrangement
VG CA
Pin Socket
14 28-2
12 – 16 D – – 35 110 250 325 – – 43 61
2 12
5 28-5
2 4
– D – – 35 110 250 325 – – 60 70
2 16
1 12
12 28-9
6 16 D – – 80 110 250 280 – – 46 65
–
6 12
7 28-10
2 4 A (= A, B,
– – – 80 110 250 280 – – 80 91
2 8 C, D, E, F)
3 12 D (= G)
22 28-11 28-11
4 25 12 A 0 – 80 110 250 280 – – 65 110
18 15 16
26 – 28-12 47 77
A 0 – 90 180 270 – – –
16
28-15
35 – A 0 – 80 110 250 280 – – 54 90
16
A (A-L)
28-16
20 – D (M, N, – – 68
16 0 – 80 110 250 280 41
P)
14 28-20 28-20
10 25 12 A 0 – 80 110 250 280 – 110
– 65
4 15 16
28-21 28-21
37 A 0 – 80 110 250 280 – – 58 93
15 16
For this Layout, rotations W and Z are only valid for the commercial CA Bayonet and not for the VG95234 versions.
6 28-22 28-22
3 160/4 4 D 0 – 70 145 215 290 – – 80 120
3 15/16 16
All alternative insert position as above are permitted for VG95234 types.
ittcannon.com
19
Insulator
Contact arrangement
VG CA
Pin Socket
28-51
12 – D – – 80 135 195 – – – 57 77
12
9 28A16 28A16 0 – – – – – 2 260

A (e)
4 4 4 – – 100 250 – – – 100 135
Instr.
5 15 16 – – – – – 9 280
0 – – – – – 3 110
– – – – – – 4 80
28A51
43 – A – – – – – – 8 250 64 107
16
– – – – – – 9 280
– – – – – – 12 100
28 28A63 28A63
9 25 12 A 0 – – 100 260 – – – 85 135
19 15 16
5 32-1 32-1
E (A)
2 500/0 0 – 80 110 250 280 – 130 155
D (all 0
3 25/12 12
others)
32-5
2 – D 0 – 35 110 250 325 – – 86 114
0
32-6 32-6
23
2 160/4 4
3 60/8 8 A 0 – 80 110 250 280 – – 130 170
2 25/12 12
16 15/16 16
35 32-7 32-7 Instr.

7 25 12 (A, B, U, I.) 0 – 80 125 235 280 – – 110 160
28 15 16 A (all
others)
30 32-8
6 – 12 A 0 – 80 125 235 280 – – 105 155
24 16
14 32-9
12 16 D 0 – 80 110 250 280 – – 79 130
–
2 4
ittcannon.com
20
Insulator
Contact arrangement
View on Mating No. of Service Insulator position Special (g) including
face of Pin Insulator Contacts rating N V W X Y Z polarization contacts
VG CA
Pin Socket
23 32-13
5 – 12 D 0 – 80 110 250 280 – – 95 145
18 16
8 32-15 32-15
2 0 0 D 0 – 35 110 250 325 – – 140 165
6 25 12
32-17
4 – D 0 – 45 110 250 – – – 80 116
4
– – – – – – 3 110
– – 80 110 250 280 4 80
32A10
54 – A – – – – – – 8 250 89 132
16
– – – – – – 9 280
– – – – – – 12 100
– – – – – – 2 260
– – – – – – 3 110
– – – – – – – 4 80
47 – 32A47 73 120
A – – – – – – 8 250
16
– – – – – – 9 280
– – – – – – 12 100
32A55
55 – A – – 80 110 250 280 – – 90 134
16
61 32A69 32A69
20 15 16 Instr. 0 – – 110 250 – – – 49 84
41 10 20
Not for through-bulkhead receptacle C1 / C2. No solder pot contacts available for #10/20 contacts.
6 36-3 36-3
3 500/0 0 D 0 – 70 145 215 290 – – 165 200
3 25/12 12
All alternative insert positions as above are permitted for VG95234 types.
36-5 36-5
4 A 0 – – 120 240 – – – 152 181
500/0 0
ittcannon.com
21
Insulator
Contact arrangement
VG CA
Pin Socket
6 36-6 36-6
4 4 4 A 0 – 35 110 250 25 – – 155 173
2 0 0
47 36-7
7 – 12 A – – 80 110 250 280 – – 92 144
40 16
47 36-8
1 – 12 A – – 80 110 250 280 – – 80 132
46 16
31 36-9
14 16
14 – 12 A 0 – 80 125 235 280 – – 116 159
2 8
4
36-10 36-10
48 A 0 – 80 125 235 280 – – 79 133
15 16
16
36-14
5
8
5 – D – – – – – – – 150 230
12
6
16
D (m)
36-15
35 – A (all 0 – 60 125 245 305 – – 70 111
16
others)
– – – – – – 2 260
– – – – – – 3 110
– – – – – – 4 80
36A34
52 – A – – – – – – 8 250 83 139
16
– – – – – – 9 280
– – – – – – 12 100
– – – – – – 20 220
ittcannon.com
22
Insulator
Contact arrangement
VG CA
Pin Socket
– – – – – – 2 260
8 36A35 36A35
– – – – – – 3 110
4 15 16 A 172 183
– – – – – – 8 250
4 0 0
– – – – – – 9 280
– – – – – – 2 260
– – – – – – 3 110
36A46 – – – – – – 4 80
27 – 112 154
12 – – – – – – 8 250
A
– – – – – – 9 280
– – – – – – 12 100
39 36A98
8 – 8 A 0 – – 110 – – – – 160 140
31 16
65 36A99
15 – 16 Instr. – – 30 135 – – – 80 121
–
50 20*
No solder pot contacts available for #10/20 contacts.
*Reduced contact termination 0,3 mm2.
ittcannon.com
23
Alternative Insert Positions Positions
Indicates location of centerline of key or keyway of shells in fixed View shows mating side of pin or termination side of socket.
normal position. Insert is rotated as shown by arrow and letters.
Connectors according to VG95234 are generally available with
insert positions X and Y only.
Tolerances:
# 10SL-20: ± 2°
# 22-36: ± 1,5°
# 32A69: ± 1°
# 36A99: ± 0,5° Insert positions are added without hyphen directly behind the
contact type.
Normal position
Example:
CA3106F32A10P 2 -B-01
Pin Socket
Mating face Mating face
Special Insert Positions

A number of layouts allow for additional insert alternations.
These special insert alternations are identified by a position
number as shown in the table below.
Position Polarization
2 260°
3 110°
4 80°
5 use pos. 3
6 85°
8 250°
9 280°
11 105°
12 100°
13 use pos. 8
14 30°
15 45°
16 120°
17 130°
18 150°
19 195°
20 220°
21 255°
22 290°
23 165°
24 330°
25 235°
26 125°
ittcannon.com
24
Contact Arrangements
Contact size Contact size
No. of 0 4 8 12 16 20 No. of 0 4 8 12 16 20
Contact arrangement Contact arrangement
Contacts 500 160 100 25 15 10 Contacts 500 160 100 25 15 10
60 60
12S4 1 1 14S5 5 5
14S4 1 1 16S8 5 5
16-12 1 1 18-11 5 5
18-6 1 1 18-20 5 5
18-7 1 1 20-14 5 2 3
20-2 1 1 22-12 5 2 3
22-7 1 1 24-12 5 2 3
28-5 5 2 1 2
10SL4 2 2 32-1 5 2 3
14S9 2 2
16S4 2 2 14S6 6 6
16-11 2 2 18-12 6 6
16A11 2 2 20-8 6 2 4
18-3 2 2 20-17 6 5 1
20-23 2 2 20-22 6 3 3
22-1 2 2 22-5 6 2 4
22-8 2 2 22-15 6 5 1
24-9 2 2 28-22 6 3 3
32-5 2 2 36-3 6 3 3
36-6 6 2 4
10SL3 3 3
14S1 3 3 14SA7 7 7
14S7 3 3 16S1 7 7
16S5 3 3 18-9 7 2 5
16-7 3 1 2 18-17 7 2 5
16-10 3 3 20-15 7 7
18-5 3 2 1 22-28 7 7
18-21 3 3 24-2 7 7
18-22 3 3 24-10 7 7
20-3 3 3 24-27 7 7
20-6 3 3 28-10 7 2 2 3
20-19 3 3
22-2 3 3 18-8 8 1 7
22-9 3 3 20-7 8 8
22-21 3 1 2 22-23 8 8
32-15 8 2 6
12SA10 4 4 36A35 8 4 4
14S2 4 4
16-9 4 2 2 20-16 9 2 7
18-4 4 4 20-18 9 3 6
18-10 4 4 20A9 9 9
18-13 4 1 3 22-16 9 3 6
20-4 4 4 22-20 9 9
20-24 4 2 2 22-27 9 1 8
22-4 4 2 2 24-11 9 3 6
22-10 4 4 28A16 9 4 5
22-22 4 4
22B22 4 4 18-1 10 10
24-4 4 1 3 18-19 10 10
24-22 4 4
32-17 4 4
36-5 4 4
ittcannon.com
25
Contact size Contact size
No. of 0 4 8 12 16 20 No. of 0 4 8 12 16 20
Contact arrangement Contact arrangement
Contacts 500 160 100 25 15 10 Contacts 500 160 100 25 15 10
60 60
20-33 11 11 28A51 43 43
24-20 11 2 9
32A47 47 47
24-19 12 12 36-7 47 7 40
24A24 12 12 36-8 47 1 46
28-9 12 6 6
28-51 12 12 36-10 48 48
20-11 13 13 36A34 52 52
20-27 14 14 32A10 54 54
22-19 14 14
28-2 14 2 12 32A55 55 55
28-20 14 10 4
32-9 14 2 12 32A69 61 20 41
24-5 16 16 36A99 65 15 50
24-7 16 2 14
36-14 16 5 5 6
20-29 17 17
20A48 19 19
22-14 19 19
28-16 20 20
28-11 22 4 18
32-6 23 2 3 2 16
32-13 23 5 18
24-28 24 24
20A24 24 24
28-12 26 26
36A46 27 27
24A28 28 28
28A63 28 9 19
32-8 30 6 24
36-9 31 1 2 14 14
28-15 35 35
32-7 35 7 28
36-15 35 35
28-21 37 37
36A98 39 8 31
ittcannon.com
26
Box Mounting Receptacle - Front Mount
VG95234 – Style A
CA 3102E-B, additional modifications on page 12.
Description: Receptacle for front panel mounting with
square flange.
Threaded holes in flange not possible.
VG95234 Cannon d1 d2 d3 l1 l2 l3 l4 Weight1)

Part no. Part no. max. H13* -0,15 ±0,3 ±0,4 ±0,2 ±0,3 g max.
VG95234A-10SL-* CA3102E10SL-**-B 16,2 3,2 18,2 24,7 14,2 2,8 25,4 12

– CA3102E12S-**-B 16,2 3,2 21,4 24,7 14,2 3,2 28,0 15
VG95234A-14S-* CA3102E14S-**-B 19,2 3,2 24,6 24,7 14,2 3,2 30,0 17
VG95234A-16S-* CA3102E16S-**-B 22,4 3,2 27,4 24,7 14,2 3,2 32,5 19
VG95234A-16-* CA3102E16-**-B 22,4 3,2 27,4 33,8 19,0 3,2 32,5 22
VG95234A-18-* CA3102E18-**-B 25,6 3,2 30,8 33,8 19,0 4,0 35,0 28
VG95234A-20-* CA3102E20-**-B 29,0 3,2 34,2 33,8 19,0 4,0 38,0 33
VG95234A-22-* CA3102E22-**-B 32,2 3,2 37,4 33,8 19,0 4,0 41,0 38
VG95234A-24-* CA3102E24-**-B 35,3 3,7 40,9 33,8 20,6 4,0 44,5 46
VG95234A-28-* CA3102E28-**-B 41,4 3,7 46,7 33,8 20,6 4,0 50,8 52
VG95234A-32-* CA3102E32-**-B 47,8 4,3 53,4 33,8 22,2 4,0 57,0 64
VG95234A-36-* CA3102E36-**-B 52,6 4,3 59,6 33,8 22,2 4,0 63,5 80
1)
Weight without insulator.
CA02L-B, additional modifications on page 12.

Description: Receptacle for front panel mounting with
solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions
see above table. For contact arrangements with #16 and
#12 contacts only.
ittcannon.com
27
Box Mounting Receptacle - rear mount
VG95234 Style BI (with threaded holes in flange).

CA3102E-B and modifications, eg -04, -I09 or – I I I
Description: Receptacle with square flange for rear Panel
Mounting with thread holes.
VG95234 Style B2 (with through holes in flange).
CA3102E-B and modification -05, additional modifications
on page 12.
Description: Receptacle with square flange for rear Panel
Mounting with through holes.
Style B2
d2
VG95234 Cannon d1 d3 l1 l2 l3 l4 Weight1)
B1 B2
Part no. Part no. max. -0,15 ±0,3 ±0,4 ±0,2 ±0,3 g max.
H13*
VG95234BX-10SL-* CA3102E10SL-*B-*** 16,2 M4 3,2 18,2 24,7 18,2 2,8 25,4 14
– CA3102E12S-*B-*** 16,2 M4 3,2 21,4 24,7 18,2 3,2 28,0 18
VG95234BX-14S-* CA3102E14S-*B-*** 19,2 M4 3,2 24,6 24,7 18,2 3,2 30,0 21
CG95234BX-16S-* CA3102E16S-*B-*** 22,4 M4 3,2 27,4 24,7 18,2 3,2 32,5 22
VG95234BX-16-* CA3102E16-*B-*** 22,4 M4 3,2 27,4 33,8 23,05 3,2 32,5 27
VG95234BX-18-* CA3102E18-*B-*** 25,6 M4 3,2 30,8 33,8 23,05 4,0 35,0 33
VG95234BX-20-* CA3102E20-*B-*** 29,0 M4 3,2 34,2 33,8 23,05 4,0 38,0 37
VG95234BX-22-* CA3102E22-*B-*** 32,2 M4 3,2 37,4 33,8 23,05 4,0 41,0 42
VG95234BX-24-* CA3102E24-*B-*** 35,3 M4 3,7 40,9 33,8 23,05 4,0 44,5 48
VG95234BX-28-* CA3102E28-*B-*** 41,4 M5 3,7 46,7 33,8 24,05 4,0 50,8 58
VG95234BX-32-* CA3102E32-*B-*** 47,8 M5 4,3 53,4 33,8 24,05 4,0 57,0 72
VG95234BX-36-* CA3102E36-*B-*** 54,1 M5 4,3 59,6 33,8 24,05 4,0 63,5 84
1)
Weight without insulator.
CA20L-B, additional modifications on page 12.

Description: Receptacle for rear panel mounting with
solder pin contacts to solder into printed circuits. All pattern
drawings upon request. For all other dimensions see above
table. For contact arrangements with #16 and #12
contacts only.
Mod. -05
ittcannon.com
28
Thru-Bulkhead Receptacle Socket Pin
VG95234 – Style C1
TBF-B, additional modifications on page 12.
Description: Bulkhead receptacle with mounting flange -
with threaded holes.
VG95234 – Style C2
TBF-B-05, additional modifications on page 12.
Description: Bulkhead receptacle with mounting flange -
with through holes.
Style C2
VG95234 Cannon d2 C2 d3 e l1 l2 l3 l4 Weight1)

Part no. Part no. C1 H13* Ø -0,15 ±0,1 ±0,7 ±0,3 ±0,2 ±0,3 g max.
VG95234CX-10SL-* TBF10SL-*B-*** M4 3,2 18,2 18,2 37,5 14,2 2,8 25,4 17

– TBF12S-*B-*** M4 3,2 21,4 20,6 37,5 14,2 3,2 28,0 24
VG95234CX-14S-* TBF14S-*B-*** M4 3,2 24,6 23,0 37,5 14,2 3,2 30,0 29
VG95234CX-16S-* TBF16S-*B-*** M4 3,2 27,4 24,6 37,5 14,2 3,2 32,5 34
VG95234CX-16-* TBF16-*B-*** M4 3,2 27,4 24,6 51,4 19,0 3,2 32,5 41
VG95234CX-18-* TBF18-*B-*** M4 3,2 30,8 27,0 51,4 19,0 4,0 35,0 49
VG95234CX-20-* TBF20-*B-*** M4 3,2 34,2 29,4 51,4 19,0 4,0 38,0 56
VG95234CX-22-* TBF22-*B-*** M4 3,2 37,4 31,8 51,4 19,0 4,0 41,0 61
VG95234CX-24-* TBF24-*B-*** M4 3,7 40,9 34,9 51,4 20,6 4,0 44,5 65
VG95234CX-28-* TBF28-*B-*** M5 3,7 46,7 39,7 51,4 20,6 4,0 50,8 76
VG95234CX-32-* TBF32-*B-*** M5 4,3 53,4 44,5 51,4 22,2 4,0 57,0 92
VG95234CX-36-* TBF36-*B-*** M5 4,3 59,6 49,2 51,4 22,2 4,0 63,5 103
*Drilling tolerances according to DIN ISO 286
Straight Plug with cable clamp
VG95234 – Style D
CA3106E–B, additional modifications on page 12.
Description: Straight plug with endbell, cable clamp and
telescoping bushing.
VG95234 Cannon d1 d22) l1 l2 l3 l4 Weight1)

Part no. Part no. max. max. max. max. max. max. g max.
VG95234D-10SL-* CA3106E10SL-**B-*** 22,8 6,5 115 55 22,7 22,7 30

– CA3106E12S-**B-*** 26,0 6,5 115 55 22,7 22,7 37
VG95234D-14S-* CA3106E14S-**B-*** 29,2 9,0 115 60 27,5 27,5 44
VG95234D-16S-* CA3106E16S-**B-*** 32,0 11,0 115 60 30,0 30,0 54
VG95234D-16-* CA3106E16-**B-*** 32,0 11,0 120 70 30,0 30,0 62
VG95234D-18-* CA3106E18-**B-*** 36,5 14,2 120 75 33,0 33,0 70
VG95234D-20-* CA3106E20-**B-*** 39,9 15,8 120 75 37,5 37,5 85
VG95234D-22-* CA3106E22-**B-*** 43,1 15,8 120 75 37,5 37,5 92
VG95234D-24-* CA3106E24-**B-*** 46,6 21,4 120 90 43,3 43,3 127
VG95234D-28-* CA3106E28-**B-*** 53,4 21,4 120 90 48,0 43,3 154
VG95234D-32-* CA3106E32-**B-*** 60,1 26,7 120 90 55,0 51,7 199
VG95234D-36-*3) CA3106E36-**B-*** 66,3 31,7 130 100 58,0 58,0 260
1)
Weight without insulator, grommets and contacts. 2) For max. cable entry. 3) For contact insert 36-5P a support washer is included.
ittcannon.com
29
Plug 90° with cable clamp or endbell for flex tube
VG95234 – Style E1
CA3108F-B, additional modifications on page 12.
Description: Plug 90° with endbell for flex tube. VG/CA
E1/F
VG95234 – Style E
VG
CA3108E-B, additional modifications on page 12.
E
Description: Plug 90° with cable clamp and
telescoping bushing.
d3-Thread l2 l3 Weight1)
VG95234 Cannon d1 d22) l1 l4
Style E1 max. max. l5 g
Part no. Part no. max. max. max. max.
CA3108F E E1 E E E1
VG95234EX-10SL-* CA3108X10SL-**B-*** 5/8-24NEF-2A 22,8 6,5 45 42 30 100 22,7 9,4 37 27
– CA3108X12S-**B-*** 5/8-24NEF-2A 26,0 6,5 45 42 30 100 22,7 9,4 45 35
VG95234EX-14S-* CA3108X14S-**B-*** 3/4-20UNEF-2A 29,2 9,0 47 42 30 100 27,5 9,4 58 43
VG95234EX16S-* CA3108X16S-**B-*** 7/8-20UNEF-2A 32,0 11,0 48 45 30 100 30,0 9,4 68 48
VG95234EX-16-* CA3108X16-**B-*** 7/8-20UNEF-2A 32,0 11,0 57 45 30 100 30,0 9,4 78 58
VG95234EX-18-* CA3108X18-**B-*** 1-20UNEF-2A 36,5 14,2 58 53 35 100 33,0 9,4 90 58
VG95234EX-20-* CA3108X20-**B-*** 1 3/16-18UNEF-2A 39,9 15,8 61 53 35 100 37,5 9,4 109 74
VG95234EX-22-* CA3108X22-**B-*** 1 3/16-18UNEF-2A 43,1 15,8 61 53 35 100 37,5 9,4 113 78
VG95234EX-24-* CA3108X24-**B-*** 1 7/16-18UNEF-2A 46,6 21,4 66 58 40 100 43,3 9,4 159 104
VG95234EX-28-* CA3108X28-**B-*** 1 7/16-18UNEF-2A 53,4 21,4 66 58 40 100 43,3 9,4 181 126
VG95234EX-32-* CA3108X32-**B-*** 1 3/4 -18UNS-2A 60,1 26,7 72 66 45 110 51,7 11,0 245 160
VG95234EX-36-* CA3108 36-**B-*** 2 -18UNS-2A 66,3 31,7 75 69 50 110 58,0 12,6 300 190
Cable Connection Receptacle with cable clamp
VG95234 – Style F
Description: Cable connection receptacle with cable clamp
and telescoping bushing.
VG95234 Cannon d1 d3 l1 l2 l3 l4 l5 l7 Weight1)

d22)
Part no. Part no. max. -0,15 max. ±0,1 ±0,2 max. ±0,2 max. g max.
VG95234F-10SL-* CA3101E10SL-**B-*** 25,2 6,5 18,2 57 18,2 2,8 120 20,6 22,7 35
– CA3101E12S-**B-*** 27,8 6,5 21,4 57 18,2 3,2 120 23,6 22,7 43
VG95234F-14S-* CA3101E14S-**B-*** 29,8 9,0 24,6 59 18,2 3,2 120 25,4 27,5 50
VG95234F-16S-* CA3101E16S-**B-*** 32,3 11,0 27,4 60 18,2 3,2 120 28,6 30,0 60
VG95234F-16-* CA3101E16-**B-*** 32,3 11,0 27,4 68 23,05 3,2 125 28,6 30,0 65
VG95234F-18-* CA3101E18-**B-*** 34,8 14,2 30,8 72 23,05 4,0 125 31,7 33,0 80
VG95234F-20-* CA3101E20-**B-*** 37,8 15,8 34,2 72 23,05 4,0 125 34,9 37,5 95
VG95234F-22-* CA3101E22-**B-*** 41,1 15,8 37,4 72 23,05 4,0 125 38,1 37,5 105
VG95234F-24-* CA3101E24-**B-*** 44,6 21,4 40,9 78 23,05 4,0 125 41,3 43,3 140
VG95234F-28-* CA3101E28-**B-*** 50,9 21,4 46,7 79 24,05 4,0 125 47,6 43,3 160
VG95234F-32-* CA3101E32-**B-*** 57,1 26,7 53,4 78 24,05 4,0 125 54,0 51,7 205
VG95234F-36*-*3) CA3101E36*)-**B-*** 63,6 31,7 59,6 78 24,05 4,0 135 60,6 58,0 270
1)
Weight without insulator, grommets and contacts. 2) For max. cable entry. 3) For contact insert 36-5P a support washer is included.
ittcannon.com
30
Straight Plug for heat shrink boot
VG95234 – Style G
CA3106E–B, and modification -02, -03 or -06
additional modifications on page 12.
Description: Straight plug with with adapter for
heat shrink boots
VG95234 Cannon d1 d2 d3 d4 d4 l1 l2 Weight1)

Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234G-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24

– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234G-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234G-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234G-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234G-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234G-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234G-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234G-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234G-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234G-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234G-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
1)
Weight without insulator, grommets and contacts.
Straight Plug for flex tube
VG95234 – Style H
CA3106E-F-B, additional modifications on page 12.
Description: Straight plug for flex tube.
VG95234 Cannon d1 d22) l1 l2 Weight1)

d3-Thread
Part no. Part no. max. max. min. g max.
VG95234H-10SL-* CA3106F10SL-**B-*** 5/8-24NEF-2A 22,8 8,2 50 9,5 21

– CA3106F12S-**B-*** 5/8-24NEF-2A 26,0 8,2 50 9,5 29
VG95234H-14S-* CA3106F14S-**B-*** 3/4-20UNEF-2A 29,2 11,1 50 9,5 33
VG95234H-16S-* CA3106F16S-**B-*** 7/8-20UNEF-2A 32,0 14,3 50 9,5 42
VG95234H-16-* CA3106F16-**B-*** 7/8-20UNEF-2A 32,0 14,3 60 9,5 51
VG95234H-18-* CA3106F18-**B-*** 1-20UNEF-2A 36,5 16,7 60 9,5 59
VG95234H-20-* CA3106F20-**B-*** 1 3/16-18UNEF-2A 39,9 19,8 60 9,5 59
VG96234H-22-* CA3106F22-**B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234H-24-* CA3106F24-**B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234H-28-* CA3106F28-**B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234H-32-* CA3106F32-**B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234H-36-* CA3106F36-**B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1) 2)
Weight without insulator, grommets and contacts. For max. cable entry.
ittcannon.com
31
Wall Mounting Receptacle with cable clamp
VG95234 – Style J1.

Description: Wall mounting receptacle with cable clamp and
telescope bushing, threaded holes in flange, for rear mounting.
VG95234 – Style J2.
CA3100E-B, and modification -05, additional
modifications on page 12.
Description: Same as Style J1 but with through holes in
flange, for rear mounting.
d3
VG95234 Cannon d1 l1 l2 l2 l4 l5
d21) J1 J2
Part no. Part no. -0,15 max. +0,4 ±0,2 ±0,3 max.
H13*
VG95234*JX-10SL-* CA3100E10SL-**-B-*** 18,2 6,5 M4 3,2 57 18,2 2,8 25,4 120
– CA3100E12S-**-B-*** 21,4 6,5 M4 3,2 57 18,2 3,2 28,0 120
VG95234*JX-14S-* CA3100E14S-**-B-*** 24,6 9,0 M4 3,2 59 18,2 3,2 30,0 120
VG95234*JX-16S-* CA3100E16S-**-B-*** 27,4 11,0 M4 3,2 60 18,2 3,2 32,5 120
VG95234*JX-16-* CA3100E16-**-B-*** 27,4 11,0 M4 3,2 68 23,05 3,2 32,5 125
VG95234*JX-18-* CA3100E18-**-B-*** 30,8 14,2 M4 3,2 72 23,05 4,0 35,0 125
VG95234*JX-20-* CA3100E20-**-B-*** 34,2 15,8 M4 3,2 72 23,05 4,0 38,0 125
VG95234*JX-22-* CA3100E22-**-B-*** 37,4 15,8 M4 3,2 72 23,05 4,0 41,0 125
VG95234*JX-24-* CA3100E24-**-B-*** 40,9 21,4 M4 3,7 78 23,05 4,0 44,5 125
VG95234*JX-28-* CA3100E28-**-B-*** 46,7 21,4 M5 3,7 79 24,05 4,0 50,8 125
VG95234*JX-32-* CA3100E32-**-B-*** 53,4 26,7 M5 4,3 78 24,05 4,0 57,0 125
VG95234*JX-36-*2) CA3100E36-**-B-*** 59,6 31,7 M5 4,3 24,05 4,0 63,5 135 190
1)
For max. cable entry. 2) For contact insert 36-5P a support washer is included.
Plug 90°, Shielded for flex tube
VG95234 – Style K.
CA3108F, and modifications -13, -14 or -15, additional
Description: Shielded plug with 90° endbell for flex tube,
grounding spring on the barrel. No rear accessories to mount
cable braid to the endbell.
VG95234 Cannon d1 I1 I2 I3 Weight1)

d3-Thread
Part no. Part no. max. max. max. min. g max.
CA3108F10SL-**-B-*** 5/8-24UNEF-2A 22,8 45 22 9,4 27
– CA3108F12S-**-B-*** 5/8-24UNEF-2A 26,0 45 22 9,4 35
VG95234K-14S-* CA3108F14S-**-B-*** 3/4-20UNEF-2A 29,2 47 24 9,4 43
VG95234K-16S-* CA3108F16S-**-B-*** 7/8-20UNEF-2A 32,0 48 25 9,4 48
VG95234K-16-* CA3108F16-**-B-*** 7/8-20UNEF-2A 32,0 57 25 9,4 58
VG95234K-18-* CA3108F18-**-B-*** 1-20UNEF-2A 36,5 58 27 9,4 58
VG95234K-20-* CA3108F20-**-B-*** 1 3/16-18UNEF-2A 39,9 61 29 9,4 74
VG95234K-22-* CA3108F22-**-B-*** 1 3/16-18UNEF-2A 43,1 61 30 9,4 78
VG95234K-24-* CA3108F24-**-B-*** 1 7/16-18UNEF-2A 46,6 66 32 9,4 104
VG95234K-28-* CA3108F28-**-B-*** 1 7/16-18UNEF-2A 53,4 66 34 9,4 126
CG95234K-32-* CA3108F32-**-B-*** 1 3/4-18UNS-2A 60,1 72 39,5 11,0 160
VG95234K-36-* CA3108F36-**-B-*** 2-18UNS-2A 66,3 75 45 12,6 190
1)
ittcannon.com
32
Straight Plug, shielded for flex tube
VG95234 – Style L
CA3106F-B, and modifications -13, -14 or -15, additional
Description: Straight plug with endbell for flex tube,
grounding spring on the barrel.
VG95234 Cannon d22) I2 Weight1)

d3-Thread d1 I1
Part no. Part no. max. min. g max.
– CA3106F10SL-**-B-*** 5/8-24UNEF-2A 22,8 8,2 50 9,5 21
– CA3106F12S-**-B-*** 5/8-24UNEF-2A 26,0 8,2 50 9,5 29
VG95234L-14S-* CA3106F14S-**-B-*** 3/4-20UNEF-2A 29,2 11,1 50 9,5 33
VG95234L-16S-* CA3106F16S-**-B-*** 7/8-20UNEF-2A 32,0 14,3 50 9,5 42
VG95234L-16-* CA3106F-16-**-B-*** 7/8-20UNEF-2A 32,0 14,3 60 9,5 51
VG95234L-18-* CA3106F-18-**-B-*** 1-20UNEF-2A 36,5 16,7 60 9,5 59
VG95234L-20-* CA3106F-20-**-B-*** 1 3/16-18UNEF-2A 39,9 19,8 60 9,5 58
VG95234L-22-* CA3106F-22-**-B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234L-24-* CA3106F-24-**-B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234L-28-* CA3106F-28-**-B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234L-32-* CA3106F-32-**-B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234L-36-* CA3106F-36-**-B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1)
Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug, shielded
VG95234 – Style M
CA3106E-B, and modifications -13, -14 or -15, additional
Description: Straight, shielded plug with endbell for
shielding braid, and heat shrink boots, grounding spring
on the barrel.
VG95234 Cannon d1 d22) d3 d4 l1 l2 l3 Weight1)

Part no. Part no. max. min. ±0,5 max. max. +1 ±0,5 g max.
VG95234M-10SL-* CA3106E10SL-**-B-*** 22,8 8,6 18,5 16,3 55,0 17,0 7,0 40
– CA3106E12S-**-B-*** 26,0 9,5 20,0 17,0 55,0 17,0 7,0 42
VG95234M-14S-* CA3106E14S-**-B-*** 29,2 10,6 22,0 20,0 55,0 17,0 7,0 45
VG95234M-16S-* CA3106E16S-**-B-*** 32,0 13,5 25,0 23,0 60,0 18,0 8,0 55
VG95234M-16-* CA3106E16-**-B-*** 32,0 13,5 25,0 23,0 70,0 18,0 8,0 65
VG95234M-18-* CA3106E18-**-B-*** 36,5 14,6 28,0 24,5 70,0 18,0 8,0 75
VG95234M-20-* CA3106E20-**-B-*** 39,9 18,5 32,0 28,5 70,0 18,0 10,0 85
VG95234M-22-* CA3106E22-**-B-*** 43,1 20,8 34,0 30,5 70,0 18,0 10,0 100
VG95234M-24-* CA3106E24-**-B-*** 46,6 24,6 38,0 34,5 70,0 18,0 10,0 115
VG95234M-28-* CA3106E28-**-B-*** 53,4 27,0 41,0 37,5 70,0 18,0 10,0 130
VG95234M-32-* CA3106E32-**-B-*** 60,1 33,3 48,0 44,0 70,0 18,0 10,0 170
VG95234M-36-* CA3106E36-**-B-*** 66,3 38,5 55,0 51,0 80,0 18,0 10,0 190
1)
ittcannon.com
33
Wall Mounting Receptacle, shielded
VG95234 – Style N1.

CA3100E-B, and modifications -13, -14 or -15, see page 12.
Description: Shielded receptacle with endbell for shielding
braid, and heat shrink boots. With threaded holes in
VG95234 – Style N2.
CA3100E-B, and modifications -05-13, -05-14 or -05-15, /Mod.-05
see page 12.
Description: Same as Style N1 but with through holes in
VG95234 Cannon d1 d2 Thread H13* d3 d42) d5 e l1 l2 l3 l4 Weight1)

Part no. Part no. -0,15 N1 N2 ±0,5 min. max. ±0,1 max. +0,4 ±0,2 +0,3 g max.
VG95234*NX-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 18,5 8,6 16,3 18,2 55 18,2 2,8 25,4 45
VG95234*NX-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 22,0 10,6 20,0 23,0 58 18,2 3,2 30,0 55
VG95234*NX-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 18,2 3,2 32,5 65
VG95234*NX-16-* CA3100E16-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 23,05 3,2 32,5 75
VG95234*NX-18-* CA3100E18-**-B-*** 30,8 M4 3,2 28,0 14,6 24,5 27,0 70 23,05 4,0 35,0 85
VG95234*NX-20-* CA3100E20-**-B-*** 34,2 M4 3,2 32,0 18,5 28,5 29,4 70 23,05 4,0 38,4 95
VG95234*NX-22-* CA3100E22-**-B-*** 37,4 M4 3,2 34,0 20,8 30,5 31,8 70 23,05 4,0 41,0 105
VG95234*NX-24-* CA3100E24-**-B-*** 40,9 M4 3,7 38,0 24,6 34,5 34,9 70 23,05 4,0 44,5 120
VG95234*NX-28-* CA3100E28-**-B-*** 46,7 M5 3,7 41,0 27,0 37,5 39,7 70 24,05 4,0 50,8 150
VG95234*NX-32-* CA3100E32-**-B-*** 53,4 M5 4,3 48,0 33,3 44,0 44,5 75 24,05 4,0 57,0 190
VG95234*NX-36-* CA3100E36-**-B-*** 59,6 M5 4,3 55,0 38,5 51,0 49,2 85 24,05 4,0 63,5 220
1)
ittcannon.com
34
Straight Plug, shielded with adapter for heat shrink boots
VG95234 – Style T.
CA3106E-B, and modifications 02-41, 03-41 or 06-41,
see page 12.
Description: Straight plug, shielded ground spring on the
barrel with endbell for heat shrink boot.
VG95234 Cannon d1 d3 d3 d4 d5 l1 l2 Weight1)

Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234T-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24
– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234T-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234T-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234T-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234T-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234T-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234T-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234T-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234T-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234T-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234T-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
ittcannon.com
35
Wall Mounting Receptacle for heat shrink boots
VG95234 – Style U1.

CA3100E-B, and modifications -02, -03, or -06, see page 12
Description: Wall mounting receptacle with adapter for heat
shrink boots, with threaded holes in flange, for rear mounting.
VG95234 – Style U2.
CA3100E-B, and modifications -02-05, -03-05, -06-05,
see page 12.
Description: Same as Style U1 but with through holes in
VG95234 Cannon d1 Ød2 d3 d5 e l1 l2 l3 l4 Weight1)

d4
Part no. Part no. -0,15 Thread ØH13* ±0,2 max. ±0,1 max. +0,4 ±0,2 +0,3 g max.
VG95234UX-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 15,5 7,7 13,3 18,2 57 18,2 2,8 25,4 35
– CA3100E12S-**-B-*** 21,4 M4 3,2 15,5 7,9 13,3 20,6 57 18,2 3,2 28,0 45
VG95234UX-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 19,1 10,6 17,0 23,0 57 18,2 3,2 30,0 50
VG95234UX-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 57 18,2 3,2 32,5 60
VG95234UX-16-* CA3100E16-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 63 23,05 3,2 32,5 65
VG95234UX-18-* CA3100E18-**-B-*** 30,8 M4 3,2 23,9 14,6 21,9 27,0 65 23,05 4,0 35,0 80
VG95234UX-20-* CA3100E20-**-B-*** 34,2 M4 3,2 29,6 18,7 26,2 29,4 68 23,05 4,0 38,0 95
VG95234UX-22-* CA3100E22-**-B-*** 37,4 M4 3,2 29,6 20,8 26,2 31,8 68 23,05 4,0 41,0 105
VG95234UX-24-* CA3100E24-**-B-*** 40,9 M4 3,7 37,8 24,6 34,5 34,9 70 23,05 4,0 44,5 140
VG95234UX-28-* CA3100E28-**-B-*** 46,7 M5 3,7 37,8 27,0 34,5 39,7 71 24,05 4,0 50,8 160
VG95234UX-32-* CA3100E32-**-B-*** 53,4 M5 4,3 47,8 33,3 43,6 44,5 74 24,05 4,0 57,0 205
VG95234UX-36-* CA3100E36-**-B-*** 59,6 M5 4,3 47,8 38,5 43,6 49,2 74 24,05 4,0 63,5 270
1)
Cable Connection Receptacle for heat shrink boots
VG95234 – Style V.
CA3101E-B, and modifications -02, -03 or -06, see page 12.
Description: Cable connection receptacle with adapter for
heat shrinkable boots.
VG95234 Cannon d1 d22) d3 d4 d5 l1 l2 l3 l4 Weight1)

l5
Part no. Part no. -0,15 min. ±0,2 max. max. max. +0,4 ±0,2 ±0,5 g max.
VG95234V-10SL-* CA3101E10SL-**-B-*** 18,2 7,7 15,5 25,2 13,3 57 18,2 2,8 11,7 20,6 35
CA3101E12S-**-B-*** 21,4 7,9 15,5 27,8 13,3 57 18,2 3,2 11,7 23,6 45
VG95234V-14S-* CA3101E14S-**-B-*** 24,6 10,6 19,1 29,8 17,0 57 18,2 3,2 11,7 25,4 50
VG95234V-16S-* CA3101E16S-**-B-*** 27,4 13,5 23,9 32,3 21,9 57 18,2 3,2 11,7 28,6 60
VG95234V-16-* CA3101E16-**-B-*** 27,4 13,5 23,9 32,3 21,9 63 23,05 3,2 11,5 28,6 65
VG95234V-18-* CA3101E18-**-B-*** 30,8 14,6 23,9 34,8 21,9 65 23,05 4,0 11,5 31,7 80
VG95234V-20-* CA3101E20-**-B-*** 34,2 18,7 29,6 37,8 26,2 68 23,05 4,0 12,7 34,9 95
VG95234V-22-* CA3101E22-**-B-*** 37,4 20,8 29,6 41,1 26,2 68 23,05 4,0 12,7 38,1 105
VG95234V-24-* CA3101E24-**-B-*** 40,9 24,6 37,8 44,6 34,5 70 23,05 4,0 12,7 41,3 140
VG95234V-28-* CA3101E28-**-B-*** 46,7 27,0 37,8 50,9 34,5 71 24,05 4,0 12,7 47,6 160
VG95234V-32-* CA3101E32-**-B-*** 53,4 33,3 47,8 57,1 43,6 74 24,05 4,0 15,2 54,0 205
VG95234V-36-* CA3101E36-**-B-*** 59,6 38,5 47,8 63,6 43,6 74 24,05 4,0 15,2 60,6 270
1)
ittcannon.com
36
Wall Mounting Receptacle, 90°, with cable clamp
CA3100E-B-08, additional modifications on page 12.

Description: Wall mounting receptacle, with 90° endbell, cable
clamp and telescoping bushing, flange with threaded holes.
clamp and telescoping bushing, flange with through holes.
Cannon d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Part no. -0,15 Thread ØH13* max. ±0,4 max. +0,4 ±0,2 max. max. max. max. g max.
CA3100E10SL-**-B-*** 18,2 M4 3,2 6,5 18,2 50 18,2 2,8 25,4 42 22,7 100 50
CA3100E12S-**-B-*** 21,4 M4 3,2 6,5 20,6 50 18,2 3,2 28,0 42 22,7 100 60
CA3100E14S-**-B-*** 24,6 M4 3,2 9,0 23,0 52 18,2 3,2 30,0 42 27,5 100 70
CA3100E16S-**-B-*** 27,4 M4 3,2 11,0 24,6 53 18,2 3,2 32,5 45 30,0 100 80
CA3100E16-**-B-*** 27,4 M4 3,2 11,0 24,6 60 23,05 3,2 32,5 45 30,0 100 90
CA3100E18-**-B-*** 30,8 M4 3,2 14,2 27,0 62 23,05 4,0 35,0 53 33,0 100 100
CA3100E20-**-B-*** 34,2 M4 3,2 15,8 29,4 66 23,05 4,0 38,0 53 37,5 100 120
CA3100E22-**-B-*** 37,4 M4 3,2 15,8 31,8 66 23,05 4,0 41,0 53 37,5 100 130
CA3100E24-**-B-*** 40,9 M4 3,7 21,4 34,9 69 23,05 4,0 44,5 58 43,3 100 170
CA3100E28-**-B-*** 46,7 M5 3,7 21,4 39,7 70 24,05 4,0 50,8 58 43,3 100 200
CA3100E32-**-B-*** 53,4 M5 4,3 26,7 44,5 74 24,05 4,0 57,0 66 51,7 110 265
CA3100E36-**-B-*** 59,6 M5 4,3 31,7 49,2 78 24,05 4,0 63,5 69 58,0 110 325
1) 2)
Weight without insulator, grommets and contacts. For max. cable entry.
Wall Mounting Receptacle, 90°, for flex tube
CA3100F-B-08, additional modifications on page 12.

Description: Wall mounting receptacle, with 90° endbell
for flex tube. Flange with threaded holes
for flex tube. Flange with through holes.
Mod -09
Cannon d1 d2 d3 e I1 l2 l3 l4 l5 l6 Weight1)
Part no. -0,15 Thread ØH13* Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. max. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 5/8-24UNEF-2A 18,2 50 18,2 2,8 25,4 9,4 30 47
CA3100F12S-**-B-*** 21,4 M4 3,2 5/8-24UNEF-2A 20,6 50 18,2 3,2 28,0 9,4 30 57
CA3100F14S-**-B-*** 24,6 M4 3,2 3/4-20UNEF-2A 23,0 52 18,2 3,2 30,0 9,4 30 57
CA3100F16S-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 53 18,2 3,2 32,5 9,4 30 75
CA3100F16-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 60 23,05 3,2 32,5 9,4 30 85
CA3100F18-**-B-*** 30,8 M4 3,2 1-20UNEF-2A 27,0 62 23,05 4,0 35,0 9,4 35 95
CA3100F20-**-B-*** 34,2 M4 3,2 1 3/16-18UNEF-2A 29,4 66 23,05 4,0 38,0 9,4 35 115
CA3100F22-**-B-*** 37,4 M4 3,2 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 41,0 9,4 35 125
CA3100F24-**-B-*** 40,9 M4 3,7 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,4 40 160
CA3100F28-**-B-*** 46,7 M5 3,7 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,4 40 190
CA3100F32-**-B-*** 53,4 M5 4,3 1 3/4-18UNS-2A 44,5 74 24,05 4,0 57,0 11,0 45 250
CA3100F36-**-B-*** 59,6 M5 4,3 2-18UNS-2A 49,2 78 24,05 4,0 63,5 12,6 50 310
1)
ittcannon.com
37
Wall Mounting Receptacle, 90°, with cable clamp

clamp and telescoping bushing, flange with threaded holes.
clamp and telescoping bushing, flange with through holes.
Cannon d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Part no. -0,15 Thread ØH13* max. ±0,4 max. +0,4 ±0,2 max. max. max. max. g max.
CA3100E10SL-**-B-*** 18,2 M4 3,2 6,5 18,2 50 18,2 2,8 25,4 42 22,7 100 50
CA3100E12S-**-B-*** 21,4 M4 3,2 6,5 20,6 50 18,2 3,2 28,0 42 22,7 100 60
CA3100E14S-**-B-*** 24,6 M4 3,2 9,0 23,0 52 18,2 3,2 30,0 42 27,5 100 70
CA3100E16S-**-B-*** 27,4 M4 3,2 11,0 24,6 53 18,2 3,2 32,5 45 30,0 100 80
CA3100E16-**-B-*** 27,4 M4 3,2 11,0 24,6 60 23,05 3,2 32,5 45 30,0 100 90
CA3100E18-**-B-*** 30,8 M4 3,2 14,2 27,0 62 23,05 4,0 35,0 53 33,0 100 100
CA3100E20-**-B-*** 34,2 M4 3,2 15,8 29,4 66 23,05 4,0 38,0 53 37,5 100 120
CA3100E22-**-B-*** 37,4 M4 3,2 15,8 31,8 66 23,05 4,0 41,0 53 37,5 100 130
CA3100E24-**-B-*** 40,9 M4 3,7 21,4 34,9 69 23,05 4,0 44,5 58 43,3 100 170
CA3100E28-**-B-*** 46,7 M5 3,7 21,4 39,7 70 24,05 4,0 50,8 58 43,3 100 200
CA3100E32-**-B-*** 53,4 M5 4,3 26,7 44,5 74 24,05 4,0 57,0 66 51,7 110 265
CA3100E36-**-B-*** 59,6 M5 4,3 31,7 49,2 78 24,05 4,0 63,5 69 58,0 110 325
1)
Wall Mounting Receptacle, 90°, for flex tube

for flex tube. Flange with threaded holes
for flex tube. Flange with through holes.
Mod -09
Cannon d1 d2 d3 e I1 l2 l3 l4 l5 l6 Weight1)
Part no. -0,15 Thread ØH13* Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. max. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 5/8-24UNEF-2A 18,2 50 18,2 2,8 25,4 9,4 30 47
CA3100F12S-**-B-*** 21,4 M4 3,2 5/8-24UNEF-2A 20,6 50 18,2 3,2 28,0 9,4 30 57
CA3100F14S-**-B-*** 24,6 M4 3,2 3/4-20UNEF-2A 23,0 52 18,2 3,2 30,0 9,4 30 57
CA3100F16S-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 53 18,2 3,2 32,5 9,4 30 75
CA3100F16-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 60 23,05 3,2 32,5 9,4 30 85
CA3100F18-**-B-*** 30,8 M4 3,2 1-20UNEF-2A 27,0 62 23,05 4,0 35,0 9,4 35 95
CA3100F20-**-B-*** 34,2 M4 3,2 1 3/16-18UNEF-2A 29,4 66 23,05 4,0 38,0 9,4 35 115
CA3100F22-**-B-*** 37,4 M4 3,2 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 41,0 9,4 35 125
CA3100F24-**-B-*** 40,9 M4 3,7 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,4 40 160
CA3100F28-**-B-*** 46,7 M5 3,7 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,4 40 190
CA3100F32-**-B-*** 53,4 M5 4,3 1 3/4-18UNS-2A 44,5 74 24,05 4,0 57,0 11,0 45 250
CA3100F36-**-B-*** 59,6 M5 4,3 2-18UNS-2A 49,2 78 24,05 4,0 63,5 12,6 50 310
1)
ittcannon.com
38
Wall Mounting Receptacle with short endbell
CA3100R-B, additional modifications on page 12.

Description: Wall mounting receptacle with short endbell
without cable clamp. Flange with threaded holes,
for rear mounting.
Description: Wall mounting receptacle with short
endbell without cable clamp. Flange with through holes, Mod -05
for rear mounting.
Cannon d1 d2 d32) d4 e l1 l2 l3 l4 Weight1)

Part no. -0,15 Thread H13 max. max. ±0,1 max. +,0,4 ±0,2 ±0,3 g max.
CA3100R10SL-**-B-*** 18,2 M4 3,2 9,6 22,0 18,2 50 18,2 2,8 25,4 40
CA3100R12S-**-B-*** 21,4 M4 3,2 10,3 23,0 20,6 52 18,2 3,2 28,0 50
CA3100R14S-**-B-*** 24,6 M4 3,2 12,4 27,0 23,0 52 18,2 3,2 30,0 60
CA3100R16S-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 18,2 3,2 32,5 70
CA3100R16-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 23,05 3,2 32,5 75
CA3100R18-**-B-*** 30,8 M4 3,2 18,4 31,0 27,0 65 23,05 4,0 35,0 90
CA3100R20-**-B-*** 34,2 M4 3,2 22,0 35,0 29,4 65 23,05 4,0 38,0 110
CA3100R22-**-B-*** 37,4 M4 3,2 24,7 38,0 31,8 65 23,05 4,0 41,0 125
CA3100R24-**-B-*** 40,9 M4 3,7 27,6 42,0 34,9 67 23,05 4,0 44,5 160
CA3100R28-**-B-*** 46,7 M5 3,7 31,6 49,0 39,7 67 24,05 4,0 50,8 190
CA3100R32-**-B-*** 53,4 M5 4,3 38,5 55,0 44,5 67 24,05 4,0 57,0 230
CA3100R36-**-B-*** 59,6 M5 4,3 44,5 62,0 49,2 67 24,05 4,0 63,5 300
1)
Cable Connection Receptacle for flex tube

Description: Cable connection receptacle for flex tube.
Cannon d1 d22) d3 d4 l1 l2 l3 l4 l5 Weight1)

Part no. -0,15 min. Thread max. max. +0,4 ±0,2 min. ±0,2 g max.
CA3101F10SL-**-B-*** 18,2 8,2 5/8-24NEF-2A 25,2 52 18,2 2,8 9,5 20,6 35

CA3101F12S-**-B-*** 21,4 8,2 5/8-24NEF-2A 27,8 52 18,2 3,2 9,5 23,6 45
CA3101F14S-**-B-*** 24,6 11,1 3/4-20UNEF-2A 29,8 52 18,2 3,2 9,5 25,4 50
CA3101F16S-**-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 59 18,2 3,2 9,5 28,6 60
CA3101F16-**-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 59 23,05 3,2 9,5 28,6 65
CA3101F18-**-B-*** 30,8 16,7 1-20UNEF-2A 34,8 63 23,05 4,0 9,5 31,7 80
CA3101F20-**-B-*** 34,2 19,8 1 3/16-18UNEF-2A 37,8 63 23,05 4,0 9,5 34,9 95
CA3101F22-**-B-*** 37,4 19,8 1 3/16-18UNEF-2A 41,1 66 23,05 4,0 9,5 38,1 105
CA3101F24-**-B-*** 40,9 25,4 1 7/16-18UNEF-2A 44,6 69 23,05 4,0 9,5 41,3 140
CA3101F28-**-B-*** 46,7 27,0 1 7/16-18UNEF-2A 50,9 70 24,05 4,0 9,5 47,6 160
CA3101F32-**-B-*** 53,4 32,5 1 3/4-18UNS-2A 57,1 71 24,05 4,0 11,0 54,0 205
CA3101F36-**-B-*** 59,6 35,7 2-18UNS-2A 63,6 73 24,05 4,0 11,8 60,6 270
1)
ittcannon.com
39
Wall Mounting Receptacle for flex tube

Description: Wall mounting receptacle with straight endbell
for flex tube. Flange with threaded holes, for rear mounting.
Description: Wall mounting receptacle with straight endbell
for flex tube. Flange with through holes, for rear mounting.
Mod -05
Cannon d1 d2 d32) d4 e l1 l2 l3 l4 l5 Weight1)

Part no. -0,15 Thread ØH13* Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 8,2 5/8-24NEF-2A 18,2 52 18,2 2,8 25,4 9,5 40
CA3100F12S-**-B-*** 21,4 M4 3,2 8,2 5/8-24NEF-2A 20,6 52 18,2 3,2 28,0 9,5 50
CA3100F14S-**-B-*** 24,5 M4 3,2 11,1 3/4-20UNEF-2A 23,0 52 18,2 3,2 30,0 9,5 60
CA3100F16S-**-B-*** 27,4 M4 3,2 14,3 7/8-20UNEF-2A 24,6 59 18,2 3,2 32,5 9,5 70
CA3100F16-**-B-*** 27,4 M4 3,2 14,3 7/8-20UNEF-2A 24,6 59 23,05 3,2 32,5 9,5 75
CA3100F18-**-B-*** 30,8 M4 3,2 16,7 1-20UNEF-2A 27,0 63 23,05 4,0 35,0 9,5 90
CA3100F20-**-B-*** 34,2 M4 3,2 19,8 1 3/16-18UNEF-2A 29,4 63 23,05 4,0 38,0 9,5 110
CA3100F22-**-B-*** 37,4 M4 3,2 19,8 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 42,0 9,5 125
CA3100F24-**-B-*** 40,9 M4 3,7 25,4 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,5 160
CA3100F28-**-B-*** 46,7 M5 3,7 27,0 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,5 190
CA3100F32-**-B-*** 53,4 M5 4,3 32,5 1 3/4-18UNS-2A 44,5 71 24,05 4,0 57,0 11,0 230
CA3100F36-**-B-*** 59,6 M5 4,3 35,7 2-18UNS-2A 49,2 73 24,05 4,0 63,5 11,8 300
1)
ittcannon.com
40
Cable Connection Receptacle with short endbell

Description: Cable connection receptacle with short endbell,
without cable clamp.
Cannon d1 d2 d3 d4 l1 l2 l3 l5 Weight1)
Part no. -0,15 min. max. max. max. +,0,4 ±0,2 ±0,2 g max.
CA3101R10SL-**-B-*** 18,2 9,6 22,0 25,2 50 18,2 2,8 20,6 32
CA3101R12S-**-B-*** 21,4 10,3 23,0 27,8 52 18,2 3,2 23,6 40
CA3101R14S-**-B-*** 24,6 12,4 27,0 29,8 52 18,2 3,2 25,4 47
CA3101R16S-**-B-*** 27,4 15,4 28,0 32,3 58 18,2 3,2 28,6 55
CA3101R16-**-B-*** 27,4 15,4 28,0 32,3 58 23,05 3,2 28,6 60
CA3101R18-**-B-*** 30,8 18,4 31,0 34,8 65 23,05 4,0 31,7 75
CA3101R20-**-B-*** 34,2 22,0 35,0 37,8 65 23,05 4,0 34,9 90
CA3101R22-**-B-*** 37,4 24,7 38,0 41,1 65 23,05 4,0 38,1 100
CA3101R24-**-B-*** 40,9 27,6 42,0 44,6 67 23,05 4,0 41,3 135
CA3101R28-**-B-*** 46,7 31,6 49,0 50,9 67 24,05 4,0 47,6 155
CA3101R32-**-B-*** 53,4 38,5 55,0 57,1 67 24,05 4,0 54,0 200
CA3101R36-**-B-*** 59,6 44,5 62,0 63,6 67 24,05 4,0 60,6 260
1)
Straight Plug with short endbell

Description: Straight plug with short endbell, without
cable clamp.
Cannon d1 d3 l1 Weight1)
d21)
Part no. max. max. max. g max.
CA3106R10SL-**-B-*** 22,8 9,6 22,0 50 27
CA3106R12S-**-B-*** 26,0 10,3 23,0 50 35
CA3106R14S-**-B-*** 29,2 12,4 27,0 50 40
CA3106R16S-**-B-*** 32,0 15,4 28,0 50 50
CA3106R16-**-B-*** 32,0 15,4 28,0 60 57
CA3106R18-**-B-*** 36,5 18,4 31,0 62 65
CA3106R20-**-B-*** 39,9 22,0 35,0 62 80
CA3106R22-**-B-*** 43,1 24,7 38,0 62 87
CA3106R24-**-B-*** 46,6 27,6 42,0 62 120
CA3100R28-**-B-*** 53,4 31,6 49,0 62 150
CA3106R32-**-B-*** 60,1 38,5 55,0 62 190
CA3106R36-**-B-*** 66,3 44,5 62,0 62 250
1)
ittcannon.com
41
Jam Nut Receptacle
CA07A-B, additional modifications on page 12.

Description: Jam nut receptacle with locking hex nut.
Cannon d3
d1 d2 (l1) l2 l3 l4 d4 d5 d6 d7 sw d8 l5 l6 l7
Part no. Thread
CA07A10SL-**B-*** 35,0 18,2 7/8-20UNEF-2A 13,5 12,5 4,0 29,2 22,7 20,9 13,5 31,5 31,8 20,6 3,2 5,0 2,5
CA07A14S-**B-*** 41,3 24,6 1 1/8-18UNEF-2A 13,5 12,5 4,0 29,2 28,8 27,2 17,9 37,9 38,1 26,9 3,2 6,0 2,5
CA07A16S-**B-*** 44,4 27,4 1 1/4-18UNEF-2A 13,5 12,5 4,0 29,2 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A16-**B-*** 44,4 27,4 1 1/4-18UNEF-2A 13,5 21,0 4,0 37,7 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A18-**B-*** 48,2 30,8 1 3/8-18UNEF-2A 15,0 21,0 5,0 40,0 35,1 33,6 24,2 44,8 45,0 33,3 4,0 7,0 3,0
CA07A20-**B-*** 52,4 34,2 1 1/2-18UNEF-2A 15,0 21,0 5,0 40,0 38,2 36,8 28,2 49,0 49,2 36,5 4,0 7,0 3,0
CA07A22-**B-*** 55,5 37,4 1 5/8-18UNEF-2A 15,0 21,0 5,0 40,0 42,0 39,9 31,4 52,2 52,4 39,6 4,0 7,0 3,0
CA07A24-**B-*** 59,0 40,9 1 3/4-18UNEF-2A 15,0 21,0 5,0 40,0 44,7 43,1 34,5 55,0 55,2 41,2 4,0 7,0 3,0
CA07A28-**B-*** 66,0 46,7 2-18UNEF-2A 15,0 21,0 5,0 40,0 51,1 49,2 40,1 62,0 62,2 47,5 4,0 7,0 3,0
CA07A32-**B-*** 72,0 53,4 2 1/4-16UN-2A 15,0 21,0 5,0 40,0 57,4 55,7 46,5 68,0 68,2 54,1 4,0 7,0 3,0
CA07A36-**B-*** 80,0 59,6 2 1/2-16UN2A 15,0 21,0 5,0 40,0 63,8 62,0 51,2 75,0 75,2 60,5 4,0 8,0 3,0
Straight Plug with PG or Metric Adapter
CA06PG-B , additional modifications on page 12.

Description: Straight plug with adapter for PG Gland nut
Gland nut is not included.
CA06ME-B , additional modifications on page 12.
Description: Straight plug with adapter for ME Gland nut
Cannon d2 Cannon d2
d1 d3 l1 l2 d1 d3 l1 l2
Part no. PG-Thread Part no. Metric
CA06PG10SL-**-B-*** 22,8 18,0 52 7,0 PG 9 CA06ME10SL-**-B-*** 22,8 21.5 57 7 M16X1,5
CA06PG12S-**-B-*** 26,0 18,8 52 7,0 PG 9 CA06ME12S-**-B-*** 25,8 22.5 57 7 M16X1,5
CA06PG14S-**-B-*** 29,2 22,0 52 7,0 PG11 CA06ME14S-**-B-*** 29,2 25 57 7 M20X1,5
CA06PG16S-**-B-*** 32,0 23,6 54 7,0 PG13,5 CA06ME16S-**-B-*** 32 26.5 57 7 M20X1,5
CA06PG16-**-B-*** 32,0 24,0 64 7,0 PG13,5 CA06ME16-**-B-*** 32 26.5 77 7 M20X1,5
CA06PG18-**-B-*** 36,5 24,4 69 7,5 PG13,5 CA06ME18-**-B-*** 36,5 31 77 7.5 M25X1,5
CA06PG20-**-B-*** 39,9 26,8 70 7,5 PG16 CA06ME20-**-B-*** 39,9 34 77 7.5 M25X1,5
CA06PG22-**-B-*** 42,1 26,4 73 7,5 PG16 CA06ME22-**-B-*** 43,1 40 82 7.5 M32X1,5
CA06PG24-**-B-*** 46,6 26,8 74 7,5 PG16 CA06ME24-**-B-*** 46,6 40 83 7.5 M32X1,5
CA06PG28-**-B-*** 53,4 32,0 74 7,5 PG21 CA06ME28-**-B-*** 53,4 41 83 7.5 M32X1,5
CA06PG32-**-B-*** 60,1 40,8 76 8,5 PG29 CA06ME32-**-B-*** 60,1 48.5 90 8.5 M40X1,5
CA06PG36-**-B-*** 66,3 40,8 87 9,0 PG29 CA06ME36-**-B-*** 66,3 48.5 90 9 M40X1,5
ittcannon.com
42
Wall Mounting Receptacle with PG or Metric Adapter
CA00PG-B, additional modifications on page 12.

Description: Wall mounting receptacle with
adapter for PG Gland nut
Cannon d1 d2 d3 d4 e l1 l2 l3 l4 l5
Part no. -0,15 Thread Ø H13 PG-Thread ±0,1 max +0,4 ±0,2 ±0,3 min.
CA00PG10SL-**-B-*** 18,2 M4 3,2 PG9 18,0 18,2 56 18,2 2,8 25,4 8
CA00PG12S-**-B-*** 21,4 M4 3,2 PG9 18,8 20,6 56 18,2 3,2 28,0 8
CA00PG14S-**-B-*** 24,6 M4 3,2 PG11 22,0 23,0 56 18,2 3,2 30,0 8
CA00PG16S-**-B-*** 27,4 M4 3,2 PG13,5 23,6 24,6 58 18,2 3,2 32,5 8
CA00PG16-**-B-*** 27,4 M4 3,2 PG13,5 24,0 24,6 66 21,5 3,2 32,5 8
CA00PG18-**-B-*** 30,8 M4 3,2 PG13,5 24,4 27,0 73 23,05 4,0 35,0 8
CA00PG20-**-B-*** 34,2 M4 3,2 PG16 26,8 29,4 74 23,05 4,0 38,0 8
CA00PG22-**-B-*** 37,4 M4 3,2 PG16 26,4 31,8 77 23,05 4,0 41,0 8
CA00PG24-**-B-*** 40,9 M4 3,7 PG16 26,8 34,9 77 23,05 4,0 44,5 8
CA00PG28-**-B-*** 46,7 M5 3,7 PG21 32,0 39,7 78 24,05 4,0 50,8 9
CA00PG32-**-B-*** 53,4 M5 4,3 PG29 40,8 44,5 78 24,05 4,0 57,0 9
CA00PG36-**-B-*** 59,6 M5 4,3 PG29 40,8 49,2 89 24,05 4,0 63,5 9
CA00ME-B, additional modifications on page 12.

Description: Wall mounting receptacle with adapter
for ME Gland nut
Cannon d1 d2 d3 d4 e l1 l2 l3 l4 l5
Part no. -0,15 Thread Ø H13 Metric max ±0,1 max +0,4 ±0,2 ±0,3 min.
CA00ME10SL-**-B-*** 18,2 M4 3,2 M16X1,5 21,5 18,2 60 18,2 2,8 25,4 10
CA00ME12S-**-B-*** 21,4 M4 3,2 M16X1,5 22,5 20,6 60 18,2 3,2 28,0 10
CA00ME14S-**-B-*** 24,6 M4 3,2 M20X1,5 25,0 23,0 60 18,2 3,2 30,0 11
CA00ME16S-**-B-*** 27,4 M4 3,2 M20X1,5 26,5 24,6 60 18,2 3,2 32,5 11
CA00ME16-**-B-*** 27,4 M4 3,2 M20X1,5 26,5 24,6 79 21,5 3,2 32,5 11
CA00ME18-**-B-*** 30,8 M4 3,2 M25X1,5 31,0 27,0 81 23,05 4,0 35,0 11
CA00ME20-**-B-*** 34,2 M4 3,2 M25X1,5 34,0 29,4 81 23,05 4,0 38,0 11
CA00ME22-**-B-*** 37,4 M4 3,2 M32X1,5 40,5 31,8 86 23,05 4,0 41,0 12
CA00ME24-**-B-*** 40,9 M4 3,7 M32X1,5 40,5 34,9 86 23,05 4,0 44,5 12
CA00ME28-**-B-*** 46,7 M5 3,7 M32X1,5 41,0 39,7 87 24,05 4,0 50,8 12
CA00ME32-**-B-*** 53,4 M5 4,3 M40X1,5 48,5 44,5 92 24,05 4,0 57,0 12
CA00ME36-**-B-*** 59,6 M5 4,3 M40X1,5 48,5 49,2 92 24,05 4,0 63,5 12
ittcannon.com
43
Cable Connection Receptacle with PG or Metric Adapter
CA01PG-B, additional modifications on page 12.

Description: Cable connection receptacle with
adapter for PG Gland nut
Cannon d1 d2 d3 d4 l1 l2 l3 l4 l5
Part no. -0,15 PG-Thread max max +0,4 ±0,2 min. ±0,2
CA01PG10SL-**-B-*** 18,2 PG9 18,0 25,2 56 18,2 2,8 8 20,6
CA01PG12S-**-B-*** 21,4 PG9 18,8 27,8 56 18,2 3,2 8 23,8
CA01PG14S-**-B-*** 24,6 PG11 22,0 29,8 56 18,2 3,2 8 25,4
CA01PG16S-**-B-*** 27,4 PG13,5 23,6 32,3 58 18,2 3,2 8 28,6
CA01PG16-**-B-*** 27,4 PG13,5 24,0 32,3 66 21,5 3,2 8 28,6
CA01PG18-**-B-*** 30,8 PG13,5 24,4 34,8 73 23,05 4,0 8 31,7
CA01PG20-**-B-*** 34,2 PG16 26,8 37,8 74 23,05 4,0 8 34,9
CA01PG22-**-B-*** 37,4 PG16 26,4 41,1 77 23,05 4,0 8 38,1
CA01PG24-**-B-*** 40,9 PG16 26,8 44,6 77 23,05 4,0 8 41,3
CA01PG28-**-B-*** 46,7 PG21 32,0 50,9 78 24,05 4,0 9 47,6
CA01PG32-**-B-*** 53,4 PG29 40,8 57,1 78 24,05 4,0 9 54,0
CA01PG36-**-B-*** 59,6 PG29 40,8 63,6 89 24,05 4,0 9 60,6
CA01ME-B, additional modifications on page 12.

Description: Cable connection receptacle with
adapter for ME Gland nut
Cannon d1 d2 d3 d4 l1 l2 l3 l4 l5
Part no. -0,15 Metric max max max +0,4 ±0,2 min. ±0,2
CA01ME10SL-**-B-*** 18,2 M16X1,5 21,5 25,2 60 18,2 2,8 10 20,6
CA01ME12S-**-B-*** 21,4 M16X1,5 22,5 27,8 60 18,2 3,2 10 23,8
CA01ME14S-**-B-*** 24,6 M20X1,5 25,0 29,8 60 18,2 3,2 11 25,4
CA01ME16S-**-B-*** 27,4 M20X1,5 26,5 32,3 60 18,2 3,2 11 28,6
CA01ME16-**-B-*** 27,4 M20X1,5 26,5 32,3 79 21,5 3,2 11 28,6
CA01ME18-**-B-*** 30,8 M25X1,5 31,0 34,8 81 23,05 4,0 11 31,7
CA01ME20-**-B-*** 34,2 M25X1,5 34,0 37,8 81 23,05 4,0 11 34,9
CA01ME22-**-B-*** 37,4 M32X1,5 40,0 41,1 86 23,05 4,0 12 38,1
CA01ME24-**-B-*** 40,9 M32X1,5 40,0 44,6 86 23,05 4,0 12 41,3
CA01ME28-**-B-*** 46,7 M32X1,5 41,0 50,9 87 24,05 4,0 12 47.6
CA01ME32-**-B-*** 53,4 M40X1,5 48,5 57,1 92 24,05 4,0 12 54,0
CA01ME36-**-B-*** 59,6 M40X1,5 48,5 63,6 92 24,05 4,0 12 60.6
ittcannon.com
44
Straight Plug Shielded, banding adapter
CA06DT-…-B-**-Dxx-**
Description: Straight, shielded plug, with banding adapter
for shielding braid and heat shrink boots. Supplied with
grommet for environmental sealing IP67.
Additional options for contacts, platings etc. see page 12.
Cannon ød1 l1 Entry Ød3 Ød5 Ød6

Size sw
Part no. max. max. Size* ±0,3 ±0,2 ±0,2
CA06DT10SL-**-B-*** 10 SL 22.8 53 20 D05 4.8 7.9 9.5
D10 9.5 12.7 14.3
D11 11.1 14.3 15.8
CA06DT14S-**-B-*** 14 S 29.2 63 23 D08 7.9 11.1 12.7
D11 11.1 14.3 15.8
D14 14.45 TBD TBD
CA06DT16S-**-B-*** 16 S 32 63 26 D11 11.1 14.3 15.8
D14 14.3 17.5 19.1
D18 17.5 20.6 22.2
CA06DT16-**-B-*** 16 32 72 26 D11 12.5 14.3 15.8
D14 15.9 17.5 19.1
D18 17.45 20.6 22.2
CA06DT18-**-B-*** 18 36.5 75 28 D13 12.7 15.9 17.4
D16 15.9 19.1 20.6
D17 17.45 TBD TBD
D21 20.6 23.8 25.4
CA06DT20-**-B-*** 20 39.9 75 32 D16 15.9 19.1 20.6
D19 19.1 22.2 23.8
D24 23.8 27 28.5
CA06DT22-**-B-*** 22 43.1 75 36 D21 20.6 23.8 25.4
D22 22.2 25.4 27
D27 27 30.2 31.8
CA06DT24-**-B-*** 24 46.6 75 39 D21 20.6 23.8 25.4
D25 25.4 25.4 30.1
D29 28.6 30.2 33.3
CA06DT28-**-B-*** 28 53.4 77 46 D22 22.2 25.4 27
D27 27 30.2 31.8
D32 31.95 TBD TBD
D35 34.9 38.1 39.7
CA06DT32-**-B-*** 32 60.1 77 52 D29 28.6 31.8 33.3
D35 35.05 TBD TBD
D45 44.5 47.6 49.2
CA06DT36-**-B-*** 36 66.3 77 58 D35 34.9 38.1 39.7
D41 41.3 44.5 46
D48 47.6 50.8 52.4
For corresponding tooling and banding, please contact the factory for assembly instructions CAS25094.
ittcannon.com
45
Wall Mount Receptacle shielded, banding adapter
Description: Shielded receptacle with banding adapter for
shielding braid and heat shrink boots. With threaded holes
in flange. Supplied with grommet seal for environmental
sealing IP67. e.g. CA00DT20-29P-B-D19-A240
CA00DT-…-B-**-Dxx-** and modification -05

Description: Shielded receptacle with badning adapter for
shielding braid and heat shrink boots. With trough holes
in flange. Supplied with grommet seal for environmental
sealing IP67. e.g. CA00DT20-29P-B-05-D19-A240
Cannon Ød1 Ød2 l1 l2 l3 l4 e Entry

Size sw
Part no. -0,15 Thread ØH13* max. +0,4 ±0,2 ±0,4 +0,1 Size*
CA00DT10SL-**-B-*** 10 SL 18,2 M4 3,2 67 18,2 2,8 25,4 18,2 20 D05, D10, D11
CA00DT14S-**-B-*** 14 S 24,6 M4 3,2 67 18,2 3,2 30,0 23,0 23 D08, D11, D14
CA00DT16S-**-B-*** 16 S 27,4 M4 3,2 67 18,2 3,2 32,5 24,6 26 D11, D14, D18
CA00DT16-**-B-*** 16 27,4 M4 3,2 75 23,05 3,2 32,5 24,6 26 D11, D14, D18
CA00DT18-**-B-*** 18 30,8 M4 3,2 80 23,05 4,0 35,0 27,0 28 D13, D16, D17, D21
CA00DT20-**-B-*** 20 34,2 M4 3,2 80 23,05 4,0 38 29,4 32 D16, D19, D24
CA00DT22-**-B-*** 22 37,4 M4 3,2 80 23,05 4,0 41,0 31,8 36 D21, D22, D27
CA00DT24-**-B-*** 24 40,9 M4 3,7 80 23,05 4,0 44,5 34,9 39 D21, D25, D29
CA00DT28-**-B-*** 28 46,7 M5 3,7 80 24,05 4,0 50,8 39,7 46 D22, D27, D32, D35
CA00DT32-**-B-*** 32 53,4 M5 4,3 80 24,05 4,0 57,0 44,5 52 D29, D35, D45
CA00DT36-**-B-*** 36 59,6 M5 4,3 80 24,05 4,0 63,5 49,2 58 D35, D41, D48
*For the dimensions of the entry sizes please see the table on page 46.
Description: Shielded cable connection receptacle with
banding adapter for shielding braid and heat shrink boots.
Supplied with grommet seal for environmental sealing
IP67. e.g. CA01DT20-29P-B-D19-A240
Cannon Ød1 Ød4 l1 l2 l3 Entry

Size l5 sw
Part no. -0,15 max. max. +0,4 ±0,2 Size*
CA01DT10SL-**-B-*** 10 SL 18,2 25,2 67 18,2 2,8 20,6 20 D05, D10, D11
CA01DT14S-**-B-*** 14 S 24,6 29,8 67 18,2 3,2 25,4 23 D08, D11, D14
CA01DT16S-**-B-*** 16 S 27,4 32,3 67 18,2 3,2 28,6 26 D11, D14, D18
CA01DT16-**-B-*** 16 27,4 32,3 75 23,05 3,2 28,6 26 D11, D14, D18
CA01DT18-**-B-*** 18 30,8 34,8 80 23,05 4,0 31,7 28 D13, D16, D17, D21
CA01DT20-**-B-*** 20 34,2 37,8 80 23,05 4,0 34,9 32 D16, D19, D24
CA01DT22-**-B-*** 22 37,4 41,1 80 23,05 4,0 38,1 36 D21, D22, D27
CA01DT24-**-B-*** 24 40,9 44,6 80 23,05 4,0 41,3 39 D21, D25, D29
CA01DT28-**-B-*** 28 46,7 50,9 80 24,05 4,0 47,6 46 D22, D27, D32, D35
CA01DT32-**-B-*** 32 53,4 57,1 80 24,05 4,0 54,0 52 D29, D35, D45
CA01DT36-**-B-*** 36 59,6 63,6 80 24,05 4,0 60,6 58 D35, D41, D48
*For the dimensions of the entry sizes please see the table on page 46.
For corresponding tooling and banding, please contact the factory for assembly instructions CAS25094.
ittcannon.com
46
Coupling Dimensions
For connector style A, B1, B2, C1, C2, F, J1, J2, N1 and
N2 resp. CA3100, CA3101, CA3102 and TBF.
A = Contact size 10. B = Contact size 15S, 15, 16S, 16.
C = Contact size 25, 12. D = Contact size 60, 100, 160,
500, 8, 4, 0. E = Contact size 10F = Contact size 15S, 16S.
G = all others.
Shell d1 d2 d4 d5 l1 l2 l3 l4 l5 l6 l7
d3
Size -0,15 +0,3 +0,4 +0,8 min. ±1 A-1 B±1 C±1 D ±0,5 ±1 E F G +0,2 +0,4 +0,1 -0,005
10SL 9,7 +0,25

18,2 11,4 -0,3 2,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 4,4 6,3
+0,25
12S 10, 8
21,4 14,2 -0,3 2,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 5,9 6,3
14S 13,0 +0,25

24,6 17,3 -0,3 2,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 6,9 6,3
16S 16,1 +0,25

27,4 20,6 -0,3 2,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 8,4 6,3
16 16,1 +0,25
27,4 20,6 -0,3 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 8,4 9,6
18 30,8 23,8 18,8 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 9,7 9,6
20 34,2 26,9 22,6 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 11,7 9,6
22 37,4 30,0 25,1 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 12,9 9,6
24 40,9 33,2 28,2 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 14,5 9,6
28 46,7 38,8 33,6 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 17,3 9,6
32 53,4 45,2 40,0 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 20,4 9,6
36 59,6 50,6 45,5 ±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 23,0 9,6
Coupling Dimensions
For connector style D, E, E1, G and H resp. CA3106 and 3108.

A = Contact size 10. B = Contact size 15S, 15, 16S, 16.
C = Contact size 25, 12. D = Contact size 60, 100, 160, 500,
8, 4, 0. E = Contact size 10. F = Contact size 15S, 16S.
G = all others.
Shell d1 d2 d3 d4 l1 l2 l31) l4 l5 l8 l9 l10

d6
Size -0,15 -0,3 -0,1 ±0,2 ±1 A B C D ±0,5 ±1 E F G +0,05 -0,1 ±1 ±0,5 ±0,1 -0,05
10SL 18,2 11,3 9,7 +0,25 13,5 2,1

–0,3 2,6 10,0+0,3 – 2,2 – – 12,8 – 2 – 1,6 11,8 14
12S 21,4 14,0 10,8 +0,25 13,5 2,1

–0,3 2,6 11,4+0,6 – 2,2 – – 12,8 – 2 – 1,6 11,8 14
+0,25
14S 24,8 17,1 13,0 13,5 2,1
–0,3 2,6 13,3+0,6 – 2,2 – – 12,8 – 2 – 1,6 11,8 14
+0,25
16S 27,6 20,4 16,1 13,5 2,1
–0,3 2,6 16,4+0,6 – 2,2 – – 12,8 – 2 – 1,6 11,8 14
16,1+0,25 2,1
16 27,6 20,4 –0,3 4,5 16,4+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,6 16,0 18,8
18 31,1 23,6 18,8 ±0,4 4,5 19,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
20 34,5 26,7 22,6 ±0,4 4,5 23,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
22 37,7 29,8 25,1 ±0,4 4,5 26,0+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
±0,4
24 41,2 33,0 28,2 4,5 29,1+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
28 47,0 38,6 33,6 ±0,4 4,5 34,7+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
32 53,7 44,9 40,0 ±0,4 4,5 41,0+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
36 59,9 50,3 45,5 ±0,4 4,5 46,6+0,7 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
1)
In terminated condition.
ittcannon.com
47
CAB IP69K
General Information Recommended Method of Mounting
Scope Connector shell is fixed with 4 screws on the housing. In combination
This specification describes a CA-B connector with a sealing with universal endbell and an o-ring between flange receptacle and
effectiveness up to IP69K. This connector is interchangeable wall the connector will reach IP68 sealing (1 bar, 16h) and IP69K
with the corresponding types as per MIL-C-5015 and VG95234, sealing acc. to ISO20653.
as they offer the same mounting dimensions and contact
arrangements. These connectors are without spring washer,
friction ring and grommet.
Ratings & Characteristics
Locking Device Bayonet Coupling

Contact Type Crimp or Solder Contacts
Electrical Characteristics In accordance with VG95234 bayonet coupling
Environmental Characteristics In accordance with VG95234 bayonet coupling
Deviance with plating A240: 500h salt spray test with mated pair
Deviance with plating A34: 48h salt spray test
Water tightness for mated connector IP68 (1bar, 16h) and IP69K in combination with universal endbell and o-ring
(flange receptacle to wall)
Normative references
DIN EN 61984 Electrical Connector, safety requirements and tests

IEC 60068 Environmental tests
IEC 60352 Crimp connection and requirements
IEC 60512 Electrical Connector, measuring and test procedure
IEC 60529 Specification for degrees of protection provided by enclosures
VG 95373 Electromagnetic compatibility
Mechanical Characteristics
Designation Material Finish
Shell
Coupling Nut
Endbell
Aluminium-alloy According to order reference
Cone Ring
Clamping Nut
Clutch Spring
Circlip Spring Steel -
Contact Copper-alloy Silver Plated and Passivated
Clutch Ring PPS -
Shielding Sleeve PA66
Clamping Ring PBT
Insulator
Sealing Ring
CR-rubber -
Grommet
O-ring
ittcannon.com
48
How to order
Cannon Order reference
CA 06 X H 20 29 S W B - 13-D17-A240
Series
Shell style
Class
Sealing Material
Shell Size
Contact Arrangement
Contact Type
Insulator position
Coupling Mechanism
Dash
Modification
Cable Sealing Area
Explanation Cable sealing area

Series D07 = with Universal Endbell (IP69K), straight version: #10SL,
CA #14S, #20 (wire size 4,5 – 7,2mm)
D09 = with Universal Endbell (IP69K), straight version: #14S,
Shell style #20 (wire size 6,5 - 9,3mm)
01 = Cable connection receptacle D11 = with Universal Endbell (IP69K), straight version: #14S,
02 = Wall mounting receptacle, front panel mounting #18, #20 (wire size 8,0 – 10,3mm)
06 = Straight plug, without spring washer, friction ring and D13 = with Universal Endbell (IP69K), straight version: #18,
grommet #20, #22 (wire size 9,0 – 12,5mm
Class D14 = with Universal Endbell (IP69K), straight version: #18,
X=Environmental (IP69K) #20, #22, #28 (wire size 11,5 – 14,2mm)
D17 = with Universal Endbell (IP69K), straight version: #20,
Sealing material #22, #28 (wire size 14,5 – 16,6mm)
Without = CR-Sealing (cable seal: Silicone)
H= FKM sealing (cable seal: Silicone), consult factory
Modification
Shell sizes 13 – shielded version, solder pot contacts (for CA06 only)
Available shell sizes: 10SL, 14S, 18, 20, 22, 28 14 – shielded version, metric crimp contacts (for CA06 only)
Contact arrangement 15 – shielded version, AWG crimp contacts (for CA06 only)
See pages 13-23 A176 – gold plated contact, see pages 59-60
A239 – Zinc Cobalt black plating, VG approved
Contact type
A232 – Zinc cobalt black plating
P= Pin, S=Socket
A233 – Zinc cobalt green plating
Coupling mechanism A240 – Zinc Nickel blue grey plating
B=Bayonet F0 – less contacts, contacts to be ordered separately,
see page 61
Insulator position
See pages 13-29, no identification for normal position
ittcannon.com
49
Cable Connecting Receptacle with universal endbell
Endbell: Universal Endbell

Shielding: Yes
Sealing: IP67, IP68, IP69K in mated condition
CA01X…
Straight receptacle for cable connection with universal endbell.
Please pay attention that the diameter of the cable is within
the range ØH.
ØA ØB C D E ØF G ØH Range
Part no.
-0.15 ± 0,2 + 0,4 ± 0,2 max max ± 0,2 min max
CA01X10SL-**…D07… 18.2 17.9 18.2 2.8 85 25.2 20.6 4.5 - 7.2 mm
CA01X14S-**…D07… 24.6 17.9 18.2 3.2 87 29.8 25.4 4.5 - 7.2 mm
CA01X14S-**…D09… 24.6 21.0 18.2 3.2 87 29.8 25.4 6.5 - 9.3 mm
CA01X14S-**…D11… 24.6 24.0 18.2 3.2 87 29.8 25.4 8.0 - 10.3 mm
CA01X18-**…D11… 30.8 24.0 23.05 4.0 93 34.8 31.7 8.0 - 10.3 mm
CA01X18-**…D13… 30.8 27.4 23.05 4.0 93 34.8 31.7 9.0 - 12.5 mm
CA01X18-**…D14… 30.8 30.0 23.05 4.0 93 34.8 31.7 11.5 - 14.2 mm
CA01X20-**…D07… 34.2 17.9 23.05 4.0 96 37.8 34.9 4.5 - 7.2 mm
CA01X20-**…D09… 34.2 21.0 23.05 4.0 96 37.8 34.9 6.5 - 9.3 mm
CA01X20-**…D11… 34.2 24.0 23.05 4.0 96 37.8 34.9 8.0 - 10.3 mm
CA01X20-**…D13… 34.2 27.4 23.05 4.0 96 37.8 34.9 9.0 - 12.5 mm
CA01X20-**…D17… 34.2 33.6 23.05 4.0 96 37.8 34.9 14.5 - 16.6 mm
CA01X22-**…D13… 37.4 27.4 23.05 4.0 100 41.1 38.1 9.0 - 12.5 mm
CA01X22-**…D14… 37.4 30.0 23.05 4.0 100 41.1 38.1 11.5 - 14.2 mm
CA01X22-**…D17… 37.4 33.6 23.05 4.0 100 41.1 38.1 14.5 - 16.6 mm
CA01X28-**…D17… 37.4 33.6 24.05 4.0 108 50.9 47.6 14.5 - 16.6 mm
Box Mounting Receptacle for front panel mounting
Endbell: None
Shielding: None
CA02X…-B…
Box Mounting Receptacle
Front Panel Mounting with O-Ring Sealing for IP69K
Part no. A B C D E F G H X / Contact size

-0.15 + 0,4 ± 0,2 ± 0,3 max ± 0,1 ± 0,3 H13 15 25 100
CA02X10SL-**-P*-B 18.2 14.2 2.8 24.7 16.2 18.2 25.4 3.2 13.6 - -
CA02X14S-**-P*-B 24.6 14.2 3.2 24.7 19.2 23 30 3.2 13.2 - -
CA02X18-**-P*-B 30.8 19.0 4.0 33.8 25.6 27.0 35.0 3.2 17.1 17.1 18.7
CA02X20-**-P*-B 34.2 19.0 4.0 33.8 29.0 29.4 38.0 3.2 17.1 17.1 18.7
CA02X22-**-P*-B 37.4 19 4.0 33.8 32.2 31.8 41 3.2 17.1 17.1 18.7
CA02X28-**-P*-B 46.7 20.6 4.0 33.8 41.4 39.7 50.8 3.7 15.5 15.5 17.1
ittcannon.com
50
Straight Plug with universal endbell
Endbell: Universal Endbell

Shielding: Yes, with Modification Code
CA06X…-B…
Straight plug with universal endbell.
Please pay attention that the diameter of the cable is
within the sealing range ØD.
ØA B ØE ØD Sealing Range
Part no.
max max ± 0,2 min max
CA06X10SL-**…D07… 22.8 82 17.9 4.5 - 7.2 mm
CA06X14S-**…D07… 29.2 82 17.9 4.5 - 7.2 mm
CA06X14S-**…D09… 29.2 82 21.0 6.5 - 9.3 mm
CA06X14S-**…D11… 29.2 82 24.0 8.0 - 10.3 mm
CA06X18-**…D11… 36.5 88 24.0 8.0 - 10.3 mm
CA06X18-**…D13… 36.5 88 27.4 9.0 - 12.5 mm
CA06X18-**…D14… 36.5 88 30.0 11.5 - 14.2 mm
CA06X20-**…D07… 39.9 92 17.9 4.5 - 7.2 mm
CA06X20-**…D09… 39.9 92 21.0 6.5 - 9.3 mm
CA06X20-**…D11… 39.9 92 24.0 8.0 - 10.3 mm
CA06X20-**…D13… 39.9 92 27.4 9.0 - 12.5 mm
CA06X20-**…D14… 39.9 92 27.4 9.0 - 12.5 mm
CA06X20-**…D17… 39.9 92 33.6 14.5 - 16.6 mm
CA06X22-**…D13… 43.1 98 27.4 9.0 - 12.5 mm
CA06X22-**…D14… 43.1 98 30.0 11.5 - 14.2 mm
CA06X22-**…D17… 43.1 98 33.6 14.5 - 16.6 mm
CA06X28-**…D14… 43.1 98 33.6 14.5 - 16.6 mm
CA06X28-**…D17… 53.4 105 33.6 14.5 - 16.6 mm
ittcannon.com
51
Accessories
Plastic Protecting Caps
Protecting cap for

ØA ØB ØD F G H
Part no. Receptacles Plugs
max. -0,2 +0,2 ±0,2 ±0,2 max.
Shell size Shell size
025-8636-005 10S/10SL – 22,8 17,7 19,7 10,7 14,2 15,9
025-8636-006 – 10S/10SL 22,8 10,7 12,9 15,5 17,0 18,7
025-8636-008 – 12S 26,0 13,4 15,8 15,5 17,0 18,7
025-8636-010 12S/12 – 26,0 20,9 22,9 10,7 14,2 15,9
025-8636-016 14S/14 – 29,2 24,1 26,1 10,7 14,2 15,9
025-8636-017 – 14S 29,2 16,5 19,1 15,5 17,0 18,7
025-8636-018 – 14 29,2 16,5 19,1 20,2 21,7 23,4
025-8636-022 – 16S 32,0 19,8 22,4 15,5 17,0 18,7
025-8636-024 – 16 32,0 19,8 22,4 20,2 21,7 23,4
025-8636-025 16S – 32,0 26,9 28,9 10,7 14,2 15,9
025-8636-026 16 – 32,0 26,9 28,9 17,5 19,0 20,7
025-8636-034 18 – 36,5 30,3 32,3 17,5 19,0 20,7
025-8636-036 – 18 36,5 23,0 25,6 20,2 21,7 23,4
025-8636-042 20 – 39,9 33,7 35,7 17,5 19,0 20,7
025-8636-044 – 20 39,9 26,1 28,8 20,2 21,7 23,4
025-8636-048 – 22 43,1 29,2 31,9 20,2 21,7 23,4
025-8636-049 22 – 43,1 36,9 38,9 17,5 19,0 20,7
025-8636-053 24 – 46,6 40,4 42,4 19,1 20,6 22,3
025-8636-054 – 24 46,6 32,4 35,1 20,2 21,7 23,4
025-8636-058 28 – 53,4 46,2 48,2 19,1 20,6 22,3
025-8636-060 – 28 53,4 38,0 40,7 20,2 21,7 23,4
025-8636-061 – 32 60,1 44,3 47,2 20,2 21,7 23,4
025-8636-062 32 – 64,9 52,9 54,9 20,7 22,2 23,9
025-8636-064 36 – 71,1 59,1 60,1 20,7 22,2 23,9
025-8636-065 – 36 66,3 49,7 51,6 20,2 21,7 23,4
ittcannon.com
52
Metal Protecting Caps for Receptacles with Cord
Dust caps delivered with terminal link unassembled Dust caps delivered with terminal link assembled (cord length l1)
Shell Cord length d2 d1 d2 l1 l2

VG95234* Cannon A66** A66*** A241 A240
size (mm) +0,5 max. +0,5 ±10 max.
10SL VG95234KA10SL CAB81-10SL-D 400 4.3 CA121003-901 CA121003-1041 CA121003-1161 23.4 4.3 100 19.5
12S - CAB81-12S-D 400 4.3 CA121003-902 CA121003-1042 CA121003-1162 26.6 4.3 100 19.5
14S VG95234KA14S CAB81-14S-D 400 4.3 CA121003-903 CA121003-1043 CA121003-1163 29.8 4.3 100 19.5
16S VG95234KA16S CAB81-16S-D 400 4.3 CA121003-904 CA121003-1044 CA121003-1164 32.6 4.3 100 19.5
16 VG95234KA16 CAB81-16-D 400 4.3 CA121003-905 CA121003-1045 CA121003-1165 32.6 4.3 113 24.5
18 VG95234KA18 CAB81-18-D 400 4.3 CA121003-906 CA121003-1046 CA121003-1166 36.7 4.3 113 24.5
20 VG95234KA20 CAB81-20-D 400 4.3 CA121003-907 CA121003-1047 CA121003-1167 40.1 4.3 127 24.5
22 VG95234KA22 CAB81-22-D 400 4.3 CA121003-908 CA121003-1048 CA121003-1168 43.3 4.3 127 24.5
24 VG95234KA24 CAB81-24-D 400 4.3 CA121003-909 CA121003-1049 CA121003-1169 46.8 4.3 127 24.5
28 VG95234KA28 CAB81-28-D 400 5.5 CA121003-910 CA121003-1050 CA121003-1170 52.6 5.5 169 24.5
32 VG95234KA32 CAB81-32-D 400 5.5 CA121003-911 CA121003-1051 CA121003-1171 59.3 5.5 169 24.5
36 VG95234KA36 CAB81-36-D 400 5.5 CA121003-912 CA121003-1052 CA121003-1172 65.5 5.5 169 24.5
* For J Plating (VG Cadmium replacement) add “J” e.g. VG95234KA10SLJ.

** For alternative platings add plating code, e.g. CAB81-10SL-D-A241, plating codes see page 12.
Metal Protecting Caps for Receptacles with Chain
Dust caps delivered with terminal link assembled (cord length l1)
Shell d1 d2 l1 l2
VG95234* Cannon A66 A232 A233 A241 A240
size max. +0,5 ±10 max.
10SL VG95234KR10SL CA121003-1 CA121003-71 CA121003-121 CA121003-361 CA121003-161 23.4 4.3 100 19.5
12S - CA121003-2 CA121003-72 CA121003-122 CA121003-362 CA121003-162 26.6 4.3 100 19.5
14S VG95234KR14S CA121003-3 CA121003-73 CA121003-123 CA121003-363 CA121003-163 29.8 4.3 100 19.5
16S VG95234KR16S CA121003-4 CA121003-74 CA121003-124 CA121003-364 CA121003-164 32.6 4.3 100 19.5
16 VG95234KR16 CA121003-5 CA121003-75 CA121003-125 CA121003-365 CA121003-165 32.6 4.3 113 24.5
18 VG95234KR18 CA121003-6 CA121003-76 CA121003-126 CA121003-366 CA121003-166 36.7 4.3 113 24.5
20 VG95234KR20 CA121003-7 CA121003-77 CA121003-127 CA121003-367 CA121003-167 40.1 4.3 127 24.5
22 VG95234KR22 CA121003-8 CA121003-78 CA121003-128 CA121003-368 CA121003-168 43.3 4.3 127 24.5
24 VG95234KR24 CA121003-9 CA121003-79 CA121003-129 CA121003-369 CA121003-169 46.8 4.3 127 24.5
28 VG95234KR28 CA121003-10 CA121003-80 CA121003-130 CA121003-370 CA121003-170 52.6 5.5 169 24.5
32 VG95234KR32 CA121003-11 CA121003-81 CA121003-131 CA121003-371 CA121003-171 59.3 5.5 169 24.5
36 VG95234KR36 CA121003-12 CA121003-82 CA121003-132 CA121003-372 CA121003-172 65.5 5.5 169 24.5
* For J Plating (VG Cadmium replacement) add “J” e.g. VG95234KR10SLJ.
ittcannon.com
53
Metal Protecting Caps for Plugs with Cord
Dust caps delivered with terminal link unassembled Dust caps delivered with terminal link assembled (cord length l1)
Shell Cord length d2 d1 d2 l1 l2

VG95234* Cannon A66** A66 A241 A240***
size (mm) +0,5 max. +0,5 ±10 max.
10SL VG95234KC10SL CAB80-10SL-D 400 4.3 CA121004-901 CA121004-1181 CA121004-1161 20.7 4.3 100 29
12S - CAB80-12S-D 400 4.3 CA121004-902 CA121004-1182 CA121004-1162 23.9 4.3 113 29
14S VG95234KC14S CAB80-14S-D 400 4.3 CA121004-903 CA121004-1183 CA121004-1163 27.1 4.3 113 29
16S VG95234KC16S CAB80-16S-D 400 4.3 CA121004-904 CA121004-1184 CA121004-1164 29.9 4.3 113 29
16 VG95234KC16 CAB80-16-D 400 4.3 CA121004-905 CA121004-1185 CA121004-1165 29.9 4.3 127 37
18 VG95234KC18 CAB80-18-D 400 4.3 CA121004-906 CA121004-1186 CA121004-1166 33.3 4.3 127 37
20 VG95234KC20 CAB80-20-D 400 4.7 CA121004-907 CA121004-1187 CA121004-1167 36.7 4.7 140 37
22 VG95234KC22 CAB80-22-D 400 4.7 CA121004-908 CA121004-1188 CA121004-1168 39.9 4.7 140 37
24 VG95234KC24 CAB80-24-D 400 4.7 CA121004-909 CA121004-1189 CA121004-1169 43.4 4.7 140 37
28 VG95234KC28 CAB80-28-D 400 4.7 CA121004-910 CA121004-1190 CA121004-1170 49.2 4.7 197 37
32 VG95234KC32 CAB80-32-D 400 5.5 CA121004-911 CA121004-1191 CA121004-1171 55.9 5.5 197 37
36 VG95234KC36 CAB80-36-D 400 5.5 CA121004-912 CA121004-1192 CA121004-1172 62.1 5.5 197 37
* For J Plating (VG Cadmium replacement) add “J” e.g. VG95234KC10SLJ.

** For alternative platings add plating code, e.g. CAB80-10SL-D-A241, plating codes see page 12.
Metal Protecting Caps for Plugs with Chain
Dust caps delivered with terminal link assembled (cord length l1)
Shell d1 d2 l1 l2
VG95234* Cannon A66 A232 A233 A241 A240
size max. +0,5 ±10 max.
10SL VG95234KB10SL CA121004-1 CA121004-71 CA121004-121 CA121004-181 CA121004-161 20.7 4.3 100 29
12S - CA121004-2 CA121004-72 CA121004-122 CA121004-182 CA121004-162 23.9 4.3 113 29
14S VG95234KB14S CA121004-3 CA121004-73 CA121004-123 CA121004-183 CA121004-163 27.1 4.3 113 29
16S VG95234KB16S CA121004-4 CA121004-74 CA121004-124 CA121004-184 CA121004-164 29.9 4.3 113 29
16 VG95234KB16 CA121004-5 CA121004-75 CA121004-125 CA121004-185 CA121004-165 29.9 4.3 127 37
18 VG95234KB18 CA121004-6 CA121004-76 CA121004-126 CA121004-186 CA121004-166 33.3 4.3 127 37
20 VG95234KB20 CA121004-7 CA121004-77 CA121004-127 CA121004-187 CA121004-167 36.7 4.7 140 37
22 VG95234KB22 CA121004-8 CA121004-78 CA121004-128 CA121004-188 CA121004-168 39.9 4.7 140 37
24 VG95234KB24 CA121004-9 CA121004-79 CA121004-129 CA121004-189 CA121004-169 43.4 4.7 140 37
28 VG95234KB28 CA121004-10 CA121004-80 CA121004-130 CA121004-190 CA121004-170 49.2 4.7 197 37
32 VG95234KB32 CA121004-11 CA121004-81 CA121004-131 CA121004-191 CA121004-171 55.9 5.5 197 37
36 VG95234KB36 CA121004-12 CA121004-82 CA121004-132 CA121004-192 CA121004-172 62.1 5.5 197 37
* For J Plating (VG Cadmium replacement) add “J” e.g. VG95234KB10SLJ.
ittcannon.com
54
Dummy Receptacles
Front panel mounting (rear side open)

VG95234 Style BOD (Flange with through-holes)
CA3105-B
Shell VG95234* Cannon d1 d2 l1 l2 l3 l4

size Part No. Part No. -0,15 ±0,2 ±0,3 ±0,1 max. +0,3
10SL VG95234BOD10SL CA3105E10SL-B 18,2 3,2 25,4 18,2 17,5 14,2
12S CA3105E12S-B 21,4 3,2 28,0 20,6 18,0 14,2
14S VG95234BOD14S CA3105E14S-B 24,6 3,2 30,0 23,0 18,0 14,2
16S VG95234BOD16S CA3105E16S-B 27,4 3,2 32,5 24,6 18,0 14,2
16 VG95234BOD16 CA3105E16-B 27,4 3,2 32,5 24,6 23,5 19,0
18 VG95234BOD18 CA3105E18-B 30,8 3,2 35,0 27,0 23,5 19,0
20 VG95234BOD20 CA3105E20-B 34,2 3,2 38,0 29,4 23,5 19,0
22 VG95234BOD22 CA3105E22-B 37,4 3,2 41,0 31,8 23,5 19,0
24 VG95234BOD24 CA3105E24-B 40,9 3,7 44,5 34,9 25,5 20,6
28 VG95234BOD28 CA3105E28-B 46,7 3,7 50,8 39,7 25,5 20,6
32 VG95234BOD32 CA3105E32-B 53,4 4,3 57,0 44,5 27,0 22,2
36 VG95234BOD36 CA3105E36-B 59,6 4,3 63,5 49,2 27,0 22,2
* For J Plating (VG Cadmium replacement) add “J” e.g. VG95234BODSLJ”

** For alternative platings add plating code, e.g. CA3105E10SL-B-A241, plating codes see page 12.
Dummy Receptacles
Rear panel mounting (rear side closed).

Available as Style A with threaded holes and Style B
with through holes.
Cannon Part no. Cannon Part no. Style B

Shell l1 l2 l4 Style A
with threaded with through holes d1 l3 d2
size ±0,25 ±0,3 +0,3 d2
holes Style A Style B ±0,3
10SL 248-8513-000 248-8501-000 18,2 25,4 18,2 21,1 18,3 M4 3,2
12S 248-8514-000 248-8502-000 21,4 28,0 20,6 21,5 18,3 M4 3,2
14S 248-8515-000 248-8503-000 24,6 30,0 23,0 21,5 18,3 M4 3,2
16S 248-8516-000 248-8504-000 27,4 32,5 24,6 21,5 18,3 M4 3,2
16 248-8517-000 248-8505-000 27,4 32,5 24,6 24,8 21,6 M4 3,2
18 248-8518-000 248-8506-000 30,8 35,0 27,0 27,2 23,15 M4 3,2
20 248-8519-000 248-8507-000 34,2 38,0 29,4 27,2 23,15 M4 3,2
22 248-8520-000 248-8508-000 37,4 41,0 31,8 27,2 23,15 M4 3,2
24 248-8521-000 248-8509-000 40,9 44,5 34,9 27,2 23,15 M4 3,7
28 248-8522-000 248-8510-000 46,7 50,8 39,7 28,2 24,15 M5 3,7
32 248-8523-000 248-8511-000 53,4 57,0 44,5 28,2 24,15 M5 4,4
36 248-8524-000 248-8512-000 59,6 63,5 49,2 28,2 24,15 M5 4,4
ittcannon.com
55
Sealing Rings
For use on the barrel of the plug; interfacial seal.
Size Part no. d9
10SL 980-8550-000 9,0

12S 980-8551-000 11,5
14S 980-8552-000 14,0
16/16S 980-8553-000 17,0
18 980-8554-000 19,5
20 980-8555-000 22,5
22 980-8556-000 25,4
24 980-8557-000 28,5
28 980-8558-000 34,0
32 980-8559-000 40,0
36 980-8560-000 45,0
Wire Hole Fillers
Used to close unused contact cavities. Contacts have to

be installed while the wire hole fillers are mounted
into the relevant open grommet holes.
Shell VG95234 For contact size d1 d2 l1 l2

Colour Part No.
size Part No. metr. AWG ±0,1 ±0,2 ±0,1 ±0,3
20 VG95234B20 10 2,3 3,0 2,4 9,7 red 225-1000-000
16S VG95234B16S 15S 16S 2,8 3,7 1,5 4,8 natural 225-8510-000
16 VG95234B16 15 16 2,8 3,7 3,2 11,9 blue 225-0017-000
12 VG95234B12 25/25A 12 3,7 4,6 3,2 11,9 yellow 225-0018-000
8 VG95234B08 60/100 8 5 5,8 3,2 11,9 white 225-0019-000
4 VG95234B04 160 4 7,6 8,5 3,2 11,9 green 225-8502-000
0 VG95234B00 500 0 12,8 13,5 3,2 11,9 black 225-8503-000
ittcannon.com
56
Cable Clamps
without telescoping bushing

VG95234 Style KK
Shell size
Max.
VG95234 Former suitable for l2 d1 l1 l3
A-Thread Shell-Weight
Part No. Designation MS connectors max. max. max. max.
g
acc. MS
VG95234KK 4 MS3057- 4A* 10SL, 12S, 5/8-24UNEF-2B 10,5 7,9 20,8 22,5 15
VG95234KK 6 MS3057- 6A* 14S, 3/4-20UNEF-2B 10,5 11,1 22,4 27,4 20
VG95234KK 8 MS3057- 8A* 16S, 16 7/8-20UNEF-2B 10,5 14,2 24,0 29,8 25
VG95234KK10 MS3057-10A* 18 1-20UNEF-2B 10,5 15,8 24,0 32,2 25
VG95234KK12 MS3057-12A* 20, 22 1 3/16-18NEF-2B 10,5 19,0 24,0 37,4 35
VG95234KK16 MS3057-16A* 24, 28 1 7/16-18NEF-2B 10,5 23,7 26,4 43,5 45
VG95234KK20 MS3057-20A* 32 1 3/4-18NS-2B 12,0 31,8 28,0 51,7 55
VG95234KK24 MS3057-24A* 36 2-18NS-2B 13,7 34,6 29,6 57,8 75
* WB = Cable clamp with telescoping bushing.
Telescoping Bushings
Telescoping bushings (used with MS3057A resp.

VG95234KK cable clamp) keep dirt, oil and dust out
of the endbell. Taping or wrapping wires is eliminated
since bushing protects wires guided through the clamp.
Material: Polychloroprene
Shell VG95234 Cannon d1 d2 d3 l Weight

size Part No. Part no. g
10SL VG95234KT10SL 012-8552-000 8.0 6.6 9.9 70.0 4
14S VG95234KT14S 012-8554-000 10.9 9.1 12.7 67.0 5
16S, 16 VG95234KT16 012-0218-000 14.0 11.1 19.0 64.0 6
18 VG95234KT18 012-0219-000 15.7 14.3 22.0 60.0 4
20, 22 VG95234KT20 012-0220-000 18.8 15.9 26.9 57.0 7
24, 28 VG95234KT24 012-8556-000 23.6 21.5 33.3 54.0 13
32 VG95234KT32 012-8558-000 31.5 26.8 40.4 51.0 26
36 VG95234KT36 012-0223-000 34.7 31.8 46.8 48.0 30
24.28 - 012-8555-000 21.2 16.6 26.9 57.0 13
32 - 012-8557-000 26.5 21.5 33.3 54.0 26
The commercial versions allow for the following combinations of two bushings used together in order to decrease the inner
diameter as required.
Shell size Combination of:

24, 28 012-8556-000 and 012-8555-000
32 012-8558-000 and 012-8557-000
36 012-0223-000 and 012-8558-000
ittcannon.com
57
Gaskets
VG and Standard Gasket Thickness = 1,0 mm

(Made of Polychloropren, mod. “1”).
Conductive Gasket Thickness 0,5 mm (Made of Alu-Flex)
VG95234 Style DA for front panel mounting
VG95234 Style DH for rear panel mounting
For front panel mounting
Part no. Part no.

Shell VG95234 l e d1 d2 Weight
Version Version
size Part No. ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1 Alu-Flex2
10SL VG95234DA10SL-1 075-8512-000 075-8512-001 25,4 18,2 15,7 4,2 2
12S 075-8513-000 075-8513-001 28,0 20,6 18,9 4,2 2
14S VG95234DA14S-1 075-8514-000 075-8514-001 30,0 23,0 22,1 4,2 2
16/16S VG95234DA16-1 075-8515-000 075-8515-001 32,5 24,6 25,3 4,2 2
18 VG95234DA18-1 075-8516-000 075-8516-001 35,0 27,0 28,4 4,2 2
20 VG95234DA20-1 075-8517-000 075-8517-001 38,0 29,4 31,6 4,2 2
22 VG95234DA22-1 075-8518-000 075-8518-001 41,0 31,8 34,8 4,2 2
24 VG95234DA24-1 075-8519-000 075-8519-001 44,5 34,9 38,0 4,2 2
28 VG95234DA28-1 075-8520-000 075-8520-001 50,8 39,7 44,3 5,1 2
32 VG95234DA32-1 075-8521-000 075-8521-001 57,0 44,5 50,7 5,1 2
36 VG95234DA36-1 075-8522-000 075-8522-001 63,5 49,2 57,0 5,1 2
For rear panel mounting

Part no. Part no.
Shell VG95234 l e d1 d2 Weight
Version Version
size Part No. ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1 Alu-Flex2
10SL VG95234DH10SL-1 075-8501-000 075-8501-001 25,4 18,2 18,2 4,2 2
12S 075-8502-000 075-8502-001 28,0 20,6 21,4 4,2 2
14S VG95234DH14S-1 075-8503-000 075-8503-001 30,0 23,0 24,6 4,2 2
16/16S VG95234DH16-1 075-8504-000 075-8504-001 32,5 24,6 27,4 4,2 2
18 VG95234DH18-1 075-8505-000 075-8505-001 35,0 27,0 30,8 4,2 2
20 VG95234DH20-1 075-8506-000 075-8506-001 38,0 29,4 34,2 4,2 2
22 VG95234DH22-1 075-8507-000 075-8507-001 41,0 31,8 37,4 4,2 2
24 VG95234DH24-1 075-8508-000 075-8508-001 44,5 34,9 40,9 4,2 2
28 VG95234DH28-1 075-8509-000 075-8509-001 50,8 39,7 46,7 5,1 2
32 VG95234DH32-1 075-8510-000 075-8510-001 57,0 44,5 53,4 5,1 2
36 VG95234DH36-1 075-8511-000 075-8511-001 63,5 49,2 59,6 5,1 2
ittcannon.com
58
Pin contacts
Standard contacts and contacts with reduced termination

diameter
Pin contacts Size 10/20
Finish
A36 – 5 µm silver plated and passivated
A176 – 2 µm nickel plated, min. 0,5 µm gold plated
Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0
Part no. with Part no. with

Wire
Contact VG95234 finish finish d1 l1 l3 Color
size AWG d4 d6 d7
size Part No. Standard: A36 Mod. Code: A176 -0,05 ±0,15 ±0,5 Code
mm2
silver plated gold plated
10/20 VG95234P10 0,5-1,0 20/18 030-8585-009 030-8585-011 1,04 1,5 + 0,05 1,5 + 0,05 2,4 -0,05 28,4 4,75 –
VG95234P10-001 0,2-0,4 26/22 030-8585-004 030-8585-008 1,04 1,5 + 0,05 0,9 + 0,05 2,4 -0,05 28,4 4,75 blue
15S/16S VG95234P15S 0,75-1,5 18/16 030-8586-000 030-8586-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 27,4 3,85 –
VG95234P15S-002 0,3-0,6 22/20 330-8744-000 330-8744-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 27,4 3,85 red
VG95234P15S-001 0,14-0,38 22/26 030-8586-010 030-8586-016 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 27,4 3,85 blue
15/16 VG95234P15 0,75-1,5 18/16 030-8587-000 030-8587-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 31,4 7,9 –
VG95234P15-002 0,3-0,6 22/20 330-8659-000 330-8659-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 31,4 7,9 red
VG95234P15-001 0,14-0,38 22/26 030-8587-030 030-8587-036 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 31,4 7,9 blue
25/12 VG95234P25 2,0-3,0 14/12 030-8588-000 030-8588-006 2,4 3,3 -0,15 2,5 +0,1 3,8 -0,1 37,0 7,9 –
VG95234P25-001 0,75-1,5 18/16 030-8588-010 030-8588-016 2,4 3,3 -0,15 1,75 +0,08 3,4 -0,1 37,0 7,9 black
4,0 – 030-8588-054 – 2,4 3,3 -0,15 2,8 +0,1 3,8 -0,1 37,0 7,9 –
-0,15 +0,1 -0,1
60/100/8 VG95234P8 – 8 030-8612-000 030-8612-006 3,6 6,25 4,55 6,8 39,6 6,35 –
VG95234P60 6,0 10 030-8589-000 – 3,6 6,25 -0,15 3,5 +0,1 6,8 -0,1 39,6 6,35 yellow
VG95234P100 10,0 – 030-8590-000 – 3,6 6,25 -0,15 4,8 +0,1 6,8 -0,1 39,6 6,35 –
-0,15 +0,05
VG95234P60-001 2,0-3,0 14/12 030-8612-010 – 3,6 6,25 2,5 6,8 -0,1 39,6 6,35 green
160/4 VG95234P4 – 4 030-8613-000 – 5,75 9,55 -0,15 7,1 +0,15 9,55 -0,1
39,6 6,35 –
-0,15 +0,15 -0,1
VG95234P160 16,0 – 030-8591-000 – 5,75 9,55 6,2 9,55 39,6 6,35 –
10,0 – 030-8591-020 – 5,75 9,55 -0,15 4,8 +0,1 9,55 -0,1
39,6 6,35 –
VG95234P160-001 – 6 030-8613-010 – 5,75 9,55 -0,15 5,7 +0,1 9,55 -0,1
39,6 6,35 brown
500/0 VG95234P0 – 0 030-8614-000 – 9,1 13,55 -0,15 11,5 +0,15 14,35 -0,1
41,0 6,35 –
VG95234P500 50,0 – 030-8592-000 – 9,1 13,55 -0,15 10,7 +0,15 14,35 -0,1
41,0 6,35 –
VG95234P500-001 25,0 4 030-8614-010 – 9,1 13,55 -0,15 7,6 +0,15 14,35 -0,1
41,0 6,35 white
VG95234P500-002 35,0 2 030-8614-020 – 9,1 13,55 -0,15 9,1 +0,15 14,35 -0,1
41,0 6,35 grey
16,0 – 030-8614-030 – 9,1 13,55 -0,15 6,2 +0,15 14,35 -0,1
41,0 6,35 –
ittcannon.com
59
Socket contacts
Standard contacts and contacts with reduced

Size 10/20
termination diameter
Socket contacts
Finish
A36 – 5 μm silver plated and passivated
A176 – 2 μm nickel plated, min. 0,5 μm gold plated
Size 15S/16S, 15/16
Size 25/12
Size 60/100/8, 160/4, 500/0
Part no. with Part no. with

Wire
Contact VG95234 finish finish d1 d2 l1 l3 Color
size AWG d3 d5 d6
size Part No. Standard: A36 Mod. Code: A176 +0,05 ±0,2 ±0,1 Code
mm2
silver plated gold plated
10/20 VG95234S10 0,5-1,0 20/18 031-8554-009 031-8554-011 2,0 -0,1 1,07 1,5 -0,05 1,5 +0,05
2,4 -0,05 36,8 ±0,3 4,75 –
VG95234S10-001 0,2-0,4 26/22 031-8554-004 031-8554-008 2,0 -0,1 1,07 1,5 -0,05 0,9 +0,05
2,4 -0,05 36,8 ±0,3 4,75 blue
15S/16S VG95234S15S 0,75-1,5 18/16 031-8555-110 031-8555-115 3,2 -0,15 1,65 1,75 -0,1 1,75 +0,08
2,75 -0,05 29,1 3,9 –
-0,15 -0,1 +0,1
VG95234S15S-002 0,3-0,6 22/20 031-8688-110 031-8688-115 3,2 1,65 1,75 1,20 2,75 -0,05 29,1 3,9 red
VG95234S15S-001 0,14-0,38 22/26 031-8555-130 031-8555-135 3,2 -0,15 1,65 1,75 -0,1 0,90 +0,05
2,75 -0,05 29,1 3,9 blue
-0,15 -0,1 +0,08
15/16 VG95234S15 0,75-1,5 18/16 031-8556-110 031-8556-115 3,2 1,65 1,75 1,75 2,75 -0,05 37,8 7,9 –
VG95234S15-002 0,3-0,6 22/20 031-8639-120 031-8639-115 3,2 -0,15 1,65 1,75 -0,1 1,2 +0,1
2,75 -0,05 37,8 7,9 red
VG95234S15-001 0,14-0,38 22/26 031-8556-130 031-8556-135 3,2 -0,15 1,65 1,75 -0,1 0,9 +0,05
2,75 -0,05 37,8 7,9 blue
-0,1 -0,1 +0,1
25/12 VG95234S25 2,0-3,0 14/12 031-8557-000 031-8557-006 4,8 2,45 3,3 2,5 3,8 -0,1 37,0 7,9 –
VG95234S25-001 0,75-1,5 18/16 031-8557-020 031-8557-026 4,8 -0,1 2,45 3,3 -0,1 1,75 +0,08
3,4 -0,1 37,0 7,9 black
4,0 – 031-8557-010 – 4,8 -0,1 2,45 3,3 -0,1 2,8 +0,1
3,8 -0,1 37,0 7,9 –
-0,1 -0,1 +0,1
0,3–0,6 22/20 031-8557-040 – 4,8 2,45 3,3 1,2 2,75 -0,1 37,0 7,9 –
60/100/8 VG95234S8 – 8 031-8519-000 031-8519-006 6,5 -0,2 3,65 6,25 -0,2 4,55 +0,1
6,8 -0,1 40,1 6,35 –
VG95234S60 6,0 10 031-8558-000 – 6,5 -0,2 3,65 6,25 -0,2 3,5 +0,1
6,8 -0,1 40,1 6,35 yellow
VG95234S100 10,0 – 031-8559-000 – 6,5 -0,2 3,65 6,25 -0,2 4,8 +0,1
6,8 -0,1 40,1 6,35 –
-0,2 -0,2 +0,05
VG95234S60-001 2,0-3,0 14/12 031-8519-010 – 6,5 3,65 6,25 2,5 6,8 -0,1 40,1 6,35 green
160/4 VG95234S4 – 4 031-8520-000 – 8,6 -0,2 5,8 9,55 -0,2 7,1 +0,15
9,55 -0,1 40,1 6,35 –
-0,2 -0,2 +0,15
VG95234S160 16,0 – 031-8560-000 – 8,6 5,8 9,55 6,2 9,55 -0,1 40,1 6,35 –
10,0 – 031-8560-020 – 8,6 -0,2 5,8 9,55 -0,2 4,8 +0,1
9,55 -0,1 40,1 6,35 –
VG95234S160-001 – 6 031-8520-010 – 8,6 -0,2 5,8 9,55 -0,2 5,7 +0,15
9,55 -0,1 40,1 6,35 brown
500/0 VG95234S0 – 0 031-8521-000 – 13,2 -0,2 9,15 13,55 -0,2 11,5 +0,15
14,35 -0,1 41,6 6,35 –
-0,2 -0,2 +0,15
VG95234S500 50,0 – 031-8561-000 – 13,2 9,15 13,55 10,7 14,35 -0,1 41,6 6,35 –
VG95234S500-001 25,0 4 031-8521-010 – 13,2 -0,2 9,15 13,55 -0,2 7,6 +0,15
14,35 -0,1 41,6 6,35 white
VG95234S500-002 35,0 2 031-8521-020 – 13,2 -0,2 9,15 13,55 -0,2 9,1 +0,15
14,35 -0,1 41,6 6,35 grey
-0,2 -0,2 +0,15
16,0 – 031-8521-030 – 13,2 9,15 13,55 6,2 14,35 -0,1 41,6 6,35 –
ittcannon.com
60
CA Bayonet Layout Overview with standard No. of Contact
Contact Termination*
Layout -01, -03, -04, - 14 -F80, -02, -15, -109
contact wire size Contacts size
wire size mm² wire size AWG
The table below shows all available contact arrangements 2 25/12 2,0-3,0 18/16
(layouts) available for ITT’s CA Bayonet product line. 18-10 4 25/12 2,0-3,0 14/12
18-11 5 25/12 2,0-3,0 14/12
For each layout the crimp contact styles and wire cross sections 18-12 6 15/16 0,75-1,5 18/16
used as default are shown. 18-13 3 25/12 2,0-3,0 14/12
1 60/100/8 10.0 8
If other crimp sizes are required the connector can be ordered
18-17 2 25/12 2,0-3,0 14/12
with suffix “-F0” (without contacts). 5 15/16 0,75-1,5 18/16
See ordering key on page 11 for details. In this case, separate 18-19 10 15/16 0,75-1,5 18/16
18-20 5 15/16 0,75-1,5 18/16
contacts can be selected according to contact selection tables
18-21 3 25/12 2,0-3,0 14/12
on pages 60-61.
18-22 3 15/16 0,75-1,5 18/16
*The numbers represent modifications for contact termination as 20-2 1 500/0 50.0 0
listed on page 12. E.g. CA3106E20-29S-B-14 is the modification 20-3 3 25/12 2,0-3,0 14/12
20-4 4 25/12 2,0-3,0 14/12
for a shielded endbell with metric crimp contacts.
20-6 3 15/16 0,75-1,5 18/16
20-7 8 15/16 0,75-1,5 18/16
Contact Termination* 20-8 4 15/16 0,75-1,5 18/16
No. of Contact
Layout -01, -03, -04, - 14 -F80, -02, -15, -109 2 60/100/8 10.0 8
Contacts size
wire size mm² wire size AWG 20-11 13 15/16 0,75-1,5 18/16
10SL-3 3 15S/16S 0,75-1,5 18/16 20-14 3 25/12 2,0-3,0 14/12
10SL-4 2 15S/16S 0,75-1,5 18/16 2 60/100/8 10.0 8
12S-3 2 15S/16S 0,75-1,5 18/16 20-15 7 25/12 2,0-3,0 14/12
12S-4 1 15S/16S 0,75-1,5 18/16 20-16 2 25/12 2,0-3,0 14/12
12SA10 4 15S/16S 0,75-1,5 18/16 7 15/16 0,75-1,5 18/16
14S-1 3 15S/16S 0,75-1,5 18/16 20-17 5 25/12 2,0-3,0 14/12
14S-2 4 15S/16S 0,75-1,5 18/16 1 15/16 0,75-1,5 18/16
14S-4 1 15S/16S 0,75-1,5 18/16 20-18 3 25/12 2,0-3,0 14/12

6 15/16 0,75-1,5 18/16
14S-5 5 15S/16S 0,75-1,5 18/16
20-19 3 60/100/8 10.0 8
14S-6 6 15S/16S 0,75-1,5 18/16
20-22 3 15/16 0,75-1,5 18/16
14S-7 3 15S/16S 0,75-1,5 18/16
3 60/100/8 10.0 8
14S-9 2 15S/16S 0,75-1,5 18/16
20-23 2 60/100/8 10.0 8
14SA7 7 15S/16S 0,75-1,5 18/16
20-24 2 15/16 0,75-1,5 18/16
16S-1 7 15S/16S 0,75-1,5 18/16
2 60/100/8 10.0 8
16S-4 2 15S/16S 0,75-1,5 18/16
20-27 14 15/16 0,75-1,5 18/16
16S-5 3 15S/16S 0,75-1,5 18/16
20-29 17 15/16 0,75-1,5 18/16
16S-8 5 15S/16S 0,75-1,5 18/16
20-33 11 15/16 0,75-1,5 18/16
16-7 2 15/16 0,75-1,5 18/16
20A9 9 25/12 2,0-3,0 14/12
1 60/100/8 10.0 8
20A24 24 10/20 0,5-1,0 20/18
16-9 2 15/16 0,75-1,5 18/16
20A48 19 15/16 0,75-1,5 18/16
2 25/12 2,0-3,0 14/12
22-1 2 60/100/8 10.0 8
16-10 3 25/12 2,0-3,0 14/12
22-2 3 60/100/8 10.0 8
16-11 2 25/12 2,0-3,0 14/12 22-4 2 25/12 2,0-3,0 14/12
16-12 1 160/4 16.0 4 2 60/100/8 10.0 8
16A11 2 25/12 2,0-3,0 14/12 22-5 2 25/12 2,0-3,0 14/12
18-1 10 15/16 0,75-1,5 18/16 4 15/16 0,75-1,5 18/16
18-3 2 25/12 2,0-3,0 14/12 22-7 1 500/0 50.0 0
18-4 4 15/16 0,75-1,5 18/16 22-8 2 25/12 2,0-3,0 14/12
18-5 2 25/12 2,0-3,0 14/12 22-9 3 25/12 2,0-3,0 14/12
1 15/16 0,75-1,5 18/16 22-10 4 15/16 0,75-1,5 18/16
18-6 1 160/4 16.0 4 22-12 2 60/100/8 10.0 8
18-7 1 60/100/8 10.0 8 3 15/16 0,75-1,5 18/16
18-8 1 25/12 2,0-3,0 14/12 22-14 19 15/16 0,75-1,5 18/16
7 15/16 0,75-1,5 18/16 22-15 5 25/12 2,0-3,0 14/12
18-9 5 15/16 0,75-1,5 18/16 1 15/16 0,75-1,5 18/16
ittcannon.com
61
Contact Termination* Contact Termination*
No. of Contact No. of Contact
Layout -01, -03, -04, - 14 -F80, -02, -15, -109 Layout -01, -03, -04, - 14 -F80, -02, -15, -109
Contacts size Contacts size
wire size mm² wire size AWG wire size mm² wire size AWG
22-16 3 25/12 2,0-3,0 14/12 3 15/16 0,75-1,5 18/16
6 15/16 0,75-1,5 18/16 28-51 12 25/12 2,0-3,0 14/12
22-19 14 15/16 0,75-1,5 18/16 28A16 4 160/4 16.0 4
22-20 9 15/16 0,75-1,5 18/16 5 15/16 0,75-1,5 18/16
22-21 2 15/16 0,75-1,5 18/16 28A51 43 15/16 0,75-1,5 18/16
1 500/0 50.0 0 28A63 19 15/16 0,75-1,5 18/16
22-22 4 60/100/8 10.0 8 9 25/12 2,0-3,0 14/12
22-23 8 25/12 2,0-3,0 14/12 32-1 3 25/12 2,0-3,0 14/12
22-27 1 60/100/8 10.0 8 2 500/0 50.0 0
8 15/16 0,75-1,5 18/16 32-5 2 500/0 50.0 0
22-28 7 25/12 2,0-3,0 14/12 32-6 16 15/16 0,75-1,5 18/16
24-2 7 25/12 2,0-3,0 14/12 2 25/12 2,0-3,0 14/12
24-4 1 500/0 50.0 0 3 60/100/8 10.0 8
3 15/16 0,75-1,5 18/16 2 160/4 16.0 4
24-5 16 15/16 0,75-1,5 18/16 32-7 28 15/16 0,75-1,5 18/16
24-6 8 25/12 2,0-3,0 14/12 7 25/12 2,0-3,0 14/12
24-7 2 25/12 2,0-3,0 14/12 32-8 6 25/12 2,0-3,0 14/12
14 15/16 0,75-1,5 18/16 24 15/16 0,75-1,5 18/16
24-9 2 160/4 16.0 4 32-9 12 15/16 0,75-1,5 18/16
24-10 7 60/100/8 10.0 8 2 160/4 16 4
24-11 6 25/12 2,0-3,0 14/12 32-13 5 25/12 2,0-3,0 14/12
3 60/100/8 10.0 - 18 15/16 0,75-1,5 18/16
24-12 3 25/12 2,0-3,0 14/12 32-15 6 25/12 2,0-3,0 14/12
2 160/4 16.0 4 2 500/0 50.0 0
24-19 12 15/16 0,75-1,5 18/16 32-17 4 160/4 16.0 4
24-20 2 25/12 2,0-3,0 14/12 32A10 54 15/16 0,75-1,5 18/16
9 15/16 0,75-0,5 18/16 32A47 47 15/16 0,75-1,5 18/16
24-22 4 60/100/8 10.0 8 32A55 55 15/16 0,75-1,5 18/16
24-27 7 15/16 0,75-1,5 18/16 32A69 41 10/20 0,5-1,0 20/18
24-28 24 15/16 0,75-1,5 18/16 20 15/16 0,75-1,5 18/16
24A24 12 25/12 2,0-3,0 14/12 36-3 3 500/0 50.0 0
24A28 28 15/16 0,75-1,5 18/16 3 25/12 2,0-3,0 14/12
24A51 13 15/16 0,75-1,5 18/16 36-5 4 500/0 50.0 0
5 25/12 2,0-3,0 14/12 36-6 4 160/4 16.0 4
1 60/100/8 10.0 8 2 500/0 50.0 0
28-2 12 15/16 0,75-1,5 18/16 36-7 7 25/12 2,0-3,0 14/12
2 25/12 2,0-3,0 14/12 40 15/16 0,75-1,5 18/16
28-5 2 15/16 0,75-1,5 18/16 36-8 1 25/12 2,0-3,0 14/12
2 160/4 16.0 4 46 15/16 0,75-1,5 18/16
1 25/12 2,0-3,0 14/12 36-9 14 15/16 0,75-1,5 18/16
28-9 6 15/16 0,75-1,5 18/16 14 25/12 2,0-3,0 14/12
6 25/12 2,0-3,0 14/12 2 60/100/8 10.0 8
28-10 2 160/4 16.0 4 1 160/4 16.0 4
2 60/100/8 10.0 8 36-10 48 15/16 0,75-1,5 18/16
3 25/12 2,0-3,0 14/12 36-14 5 60/100/8 10.0 8
28-11 18 15/16 0,75-1,5 18/16 5 25/12 2,0-3,0 14/12
4 25/12 2,0-3,0 14/12 6 15/16 0,75-1,5 18/16
28-12 26 15/16 0,75-1,5 18/16 36-15 35 15/16 0,75-1,5 18/16
28-15 35 15/16 0,75-1,5 18/16 36A34 52 15/16 0,75-1,5 18/16
28-16 20 15/16 0,75-1,5 18/16 36A35 4 15/16 0,75-1,5 18/16
28-20 4 15/16 0,75-1,5 18/16 4 500/0 50.0 0
10 25/12 2,0-3,0 14/12 36A46 27 25/12 2,0-3,0 14/12
28-21 37 15/16 0,75-1,5 18/16 36A98 8 60/100/8 10 8
28-22 3 160/4 16.0 4 31 15/16 0,75-1,5 18/16
36A99 15 15/16 0,75-1,5 18/16
50 10/20 0,2-0,4 26/22
ittcannon.com
62
VG Layout Overview with standard contact
wire size
The table below shows all contact arrangements (VG layouts) See ordering key on page 10 for details. In this case, separate
permitted to be used under VG95234 standard. contacts can be selected according to contact selection tables
on page 60.
For each layout the contact sizes and wire sizes used as default
are shown. Generally, all contacts used according to VG95234 * The numbers represent modifications for contact termination
are crimp contacts. as listed on page 12. E.g. VG95234M20-22P2N is the
modification for a shielded endbell with metric and AWG
If other crimp sizes are required the VG95234 standard allows
crimp contacts.
to order a connector without contacts.
Layout No. of Contacts Contact size no identification 1 2
10SL-3 3 15S 0,75-1,5 - - -
10SL-4 2 15S 0,75-1,5 - - -
14S-6 6 15S 0,75-1,5 - - -
14S-7 3 15S 0,75-1,5 - - -
16S-1 7 15S 0,75-1,5 - - -
16S-4 2 15S 0,75-1,5 - - -
16-7 2 15 0,75-1,5 - - -
1 100 10.0 - - -
16-10 3 25 2,0-3,0 - - -
16-12 1 160 16.0 - - -
16A11 2 25/25A 2,0-3,0 - - -
18-1 10 15 0,75-1,5 - - -
18-9 5 15 0,75-1,5 - - -
2 25 2,0-3,0 - - -
18-11 5 25 2,0-3,0 - - -
18-13 3 25 2,0-3,0 - - -
1 60 6.0 - - -
20-2 1 500 50.0 - - -
20-8 4 15 0,75-1,5 - - -
2 100 10.0 - - -
20-22 3 15 - - 0,75-1,5 -
3 8 - - - 8
20A9 9 25 2,0-3,0 - - -
20A48 19 15 0,75-1,5 - - -
22-2 3 8 - 8 - -
22-12 2 100 10.0 - - -
3 15 0,75-1,5 - - -
22-14 19 15 0,75-1,5 - - -
22-22 4 100 10.0 - - -
22-27 1 60 6.0 - - -
8 15 0,75-1,5 - - -
22B22 4 60 6.0 - - -
24-9 2 4 - 4 - -
24-10 7 100 - - - -
24-11 6 25 2,0-3,0 14/12 - -
3 100 10.0 8 - -
24-12 3 12 - 14/12 - -
2 4 - 4 - -
24-28 24 15 0,75-1,5 - - -
28-11 18 15 0,75-1,5 - - -
4 25 2,0-3,0 - - -
28A16 5 15 - - 0,75-1,5 -
ittcannon.com
63
Layout No. of Contacts Contact size no identification 1 2
4 4 - - - 4
28-20 4 15 0,75-1,5 - - -
10 25 2,0-3,0 - - -
28-21 37 15 0,75-1,5 - - -
28-22 3 160 16.0 4 - -
3 15 0,75-1,5 18/16 - -
28A63 19 15 0,75-1,5 - - -
9 25 2,0-3,0 - - -
32-1 3 25 2,0-3,0 14/12 - -
2 500 50.0 0 - -
32-6 16 15 0,75-1,5 18/16 - -
2 25 2,0-3,0 14/12 - -
3 60 6.0 8 - -
2 160 16.0 4 - -
32-7 28 15 0,75-1,5 - - -
7 25 2,0-3,0 - - -
32-15 6 25 - - 2,0-3,0 -
2 0 - - - 0
32A69 41 10 0,5-1,0 - - -
20 15 0,75-1,5 - - -
36-3 3 500 50.0 0 - -
3 25 2,0-3,0 14/12 - -
36-5 4 500 50.0 0 - -
36-6 4 4 - 4 - -
2 0 - 0 - -
36-10 48 15 0,75-1,5 - - -
36A35 4 15 - - 0,75-1,5 -
4 0 - - - 0
ittcannon.com
64
Tools
Crimp Tools
For pin and socket contacts according VG95234 and for Cannon contacts with reduced coupling dimensions.
Contact Size Wire size mm2 AWG Hand Crimp Tools Order Reference Crimp Locator Order Reference
10 0,5-1,0 20/18
600325 121586-0034
0,2-0,4 26/22
15S/16S 0,75-1,5 18/16
0,3-0,6 22/20
0,14-0,38 22/26
15S/16S 0,750-1,5 18/16
Pin
0,3-0,6 22/20 M22520-1-01 995-0001-585

0,14-0,38 22/26
TH 452 995-0002-052
Socket
15/16 0,75-1,5 18/16

0,3-0,6 22/20
0,14-0,38 22/26
25/12 2,0-3,0 14/12
0,75-1,5 18/16
4
Hydraulic Electro Hydraulic
Contact Size Wire size mm2 AWG Order Number Order Number
Handpump Tool
6 8
60/100/8 2,0-3,0 10
14/12
16 4
160/4
10 6
HPW400U-ITT 121586-5257 HP400EL-ITT 121586-5253
0
50
-
25
500/0 4
35
2
16
-
Insertion & Extraction Tools

Crimp contacts should be inserted or, if needed, extracted with the correct tools. In order to avoid damage to the insulator it is
recommended to use guide pins for the insertion of socket contacts.
Insertion Tools Insertion Pliers Extraction Tools Guiding Pins for

Part No. Order Reference Part No. Order Reference Part No. Order Reference Socket Contacts
CIT 20 121086-3009 CIT-F80-20 121086-0098 CET-F80-20 121086-0082
CIT 16 121086-3008 CIT-F80-16 121086-0097 CET-F80-16 121086-0081 27977-16T50
CIT 12 121086-3007 CIT-F80-12 121086-0096 CET-F80-12 121086-0080 27977-12T8
CIT 8 121086-0095 CET-8 121086-0079
CIT 4 121086-0094 CET-4 121086-0078
CIT 0 121086-0093 CET-0 121086-0077
ittcannon.com
65
Basic - Hydraulic - Electrically driven tool - Version A Basic - Hydraulic - Manual Operated tool - Version B
Pump Handle with

Reset Function
H- Crimp
Head
H- Crimp Head Electro Hydraulic Foot Pedal Handle

Crimp Tool
Basic – Manual operated crimp tool – Version C
Version Description Marking Part Number

A Electro-Hydraulic Crimp tool set with foot pedal, hand control and crimp head HP700EL-ITT 121586-5279
A (Accessory) Switch mode power supply SNT4-ITT 121586-5280
A (Accessory) Lithium Ion Battery 18V 3A with recharger LGA4-ITT 121586-5281
B Manually operated Hydraulic handtool HPW400U-ITT 121586-5257
C Hand Crimp Tool M22520-1-01 995-0001-585
Crimp tool and Bench mount Foot pedal Gauge
Description Marking Part Number

Pneumatic crimp tool (AWG 12 - 20)* WA27F-CE 121586-5067
Bench mount BM-2 121586-5068
Foot pedal WA10 121586-5069
Gauge M22520-3-1 995-0001-684
* Uses same crimp locator as hand crimp tool M22520-1-01. See table on previous page.
Crimp Dies
Cable Size
Product Contact Size Part Number Hex. Diameter Stamped label
AWG mm2
60/100/8 121586-5231 5,20 01 8 6/10
Crimp die 160/4 121586-5230 7,25 02 4 16
500/0 121586-5229 11,40 03 0 50
Locator MS / CA 121586-5232
Notes
1. For insertion and extraction of the contacts and for connector
assembly, see Assembly Instructions MIL-C-5015/VG95234
2. Standard contacts acc. to MIL-C-5015/VG95234
* Datasheet available upon request
Crimp die with locator Crimp die Locator
ittcannon.com
66
Part Number Search
Part Number Page Part Number Page Part Number Page Part Number Page
012-0218-000......................57 030-8588-054......................59 031-8688-110......................60 121586-5253.......................66
012-0219-000......................57 030-8589-000......................59 075-8501-000......................58 121586-5257.......................66
012-0220-000......................57 030-8590-000......................59 075-8502-000......................58 225-0017-000......................56
012-0223-000......................57 030-8591-000......................59 075-8503-000......................58 225-0018-000......................56
012-8552-000......................57 030-8591-020......................59 075-8504-000......................58 225-0019-000......................56
012-8554-000......................57 030-8592-000......................59 075-8505-000......................58 225-1000-000......................56
012-8555-000......................57 030-8612-000......................59 075-8506-000......................58 225-8502-000......................56
012-8556-000......................57 030-8612-006......................59 075-8507-000......................58 225-8503-000......................56
012-8557-000......................57 030-8612-010......................59 075-8508-000......................58 225-8510-000......................56
012-8558-000......................57 030-8613-000......................59 075-8509-000......................58 248-8501-000......................55
025-8636-005......................52 030-8613-010......................59 075-8510-000......................58 248-8502-000......................55
025-8636-006......................52 030-8614-000......................59 075-8511-000......................58 248-8503-000......................55
025-8636-008......................52 030-8614-010......................59 075-8512-000......................58 248-8504-000......................55
025-8636-010......................52 030-8614-020......................59 075-8513-000......................58 248-8505-000......................55
025-8636-016......................52 030-8614-030......................59 075-8514-000......................58 248-8506-000......................55
025-8636-017......................52 031-8519-000......................60 075-8515-000......................58 248-8507-000......................55
025-8636-018......................52 031-8519-006......................60 075-8516-000......................58 248-8508-000......................55
025-8636-022......................52 031-8519-010......................60 075-8517-000......................58 248-8509-000......................55
025-8636-024......................52 031-8520-000......................60 075-8518-000......................58 248-8510-000......................55
025-8636-025......................52 031-8520-010......................60 075-8519-000......................58 248-8511-000..................... 55
025-8636-026......................52 031-8521-000......................60 075-8520-000......................58 248-8512-000......................55
025-8636-034......................52 031-8521-010......................60 075-8521-000......................58 248-8513-000......................55
025-8636-036......................52 031-8521-020......................60 075-8522-000......................58 248-8514-000......................55
025-8636-042......................52 031-8521-030......................60 121086-0077.......................65 248-8515-000......................55
025-8636-044......................52 031-8554-000......................60 121086-0078...................... 65 248-8516-000......................55
025-8636-048......................52 031-8554-006......................60 121086-0079.......................65 248-8517-000......................55
025-8636-049......................52 031-8554-010......................60 121086-0080.......................65 248-8518-000......................55
025-8636-053......................52 031-8555-110......................60 121086-0081.......................65 248-8519-000......................55
025-8636-054......................52 031-8555-115......................60 121086-0082.......................65 248-8520-000......................55
025-8636-058......................52 031-8555-130......................60 121086-0093.......................65 248-8521-000......................55
025-8636-060......................52 031-8556-110......................60 121086-0094.......................65 248-8522-000......................55
025-8636-061......................52 031-8556-115......................60 121086-0095.......................65 248-8523-000......................55
025-8636-062......................52 031-8556-130......................60 121086-0096.......................65 248-8524-000......................55
025-8636-064......................52 031-8557-000......................60 121086-0097.......................65 27977-12T8.........................61
025-8636-065......................52 031-8557-006......................60 121086-0098.......................65 27977-16T50.......................61
030-8586-000......................59 031-8557-010......................60 121086-3007.......................65 330-8659-000......................59
030-8586-006......................59 031-8557-020......................60 121086-3008.......................65 330-8659-006......................59
030-8586-010......................59 031-8557-026......................60 121086-3009.......................65 330-8744-000......................59
030-8587-000......................59 031-8557-040......................60 121586-0034.......................65 330-8744-006......................59
030-8587-006......................59 031-8558-000......................60 121586-5067.......................66 600325................................65
030-8587-030......................59 031-8559-000......................60 121586-5068.......................66 980-8550-000......................56
030-8587-036......................59 031-8560-000......................60 121586-5069.......................66 980-8551-000......................56
030-8588-000......................59 031-8560-020......................60 121586-5229.......................66 980-8552-000......................56
030-8588-006......................59 031-8561-000......................60 121586-5230.......................66 980-8553-000......................56
030-8588-010......................59 031-8639-115......................60 121586-5231.......................66 980-8554-000......................56
030-8588-016......................59 031-8639-120......................60 121586-5232.......................66 980-8555-000......................56
ittcannon.com
67
Part Number Page Part Number Page Part Number Page Part Number Page
980-8556-000......................56 CA121003-162.....................53 CA121004-1147...................54 CA121004-170.....................54
980-8557-000......................56 CA121003-163.....................53 CA121004-1148...................54 CA121004-171.....................54
980-8558-000......................56 CA121003-164.....................53 CA121004-1149...................54 CA121004-172.....................54
980-8559-000......................56 CA121003-165.....................53 CA121004-1150...................54 CA121004-2.........................54
980-8560-000......................56 CA121003-166.....................53 CA121004-1151...................54 CA121004-3.........................54
995-0001-585......................65 CA121003-167.....................53 CA121004-1152...................54 CA121004-4........................ 54
995-0001-585......................66 CA121003-168.....................53 CA121004-1161...................54 CA121004-5........................ 54
995-0001-684......................66 CA121003-169.....................53 CA121004-1162...................54 CA121004-6.........................54
995-0002-052......................65 CA121003-170.....................53 CA121004-1163...................54 CA121004-7.........................54
BM-2....................................66 CA121003-171.....................53 CA121004-1164...................54 CA121004-71.......................54
CA121003-1.........................53 CA121003-172.....................53 CA121004-1165...................54 CA121004-72.......................54
CA121003-10.......................53 CA121003-2.........................53 CA121004-1166...................54 CA121004-73.......................54
CA121003-11.......................53 CA121003-3.........................53 CA121004-1167...................54 CA121004-74.......................54
CA121003-1161...................53 CA121003-4.........................53 CA121004-116.....................54 CA121004-75.......................54
CA121003-1162...................53 CA121003-5.........................53 CA121004-1169...................54 CA121004-76.......................54
CA121003-1163...................53 CA121003-6.........................53 CA121004-1170...................54 CA121004-77.......................54
CA121003-1164...................53 CA121003-7.........................53 CA121004-1171...................54 CA121004-78.......................54
CA121003-1165...................53 CA121003-71.......................53 CA121004-1172...................54 CA121004-79.......................54
CA121003-1166...................53 CA121003-72.......................53 CA121004-12.......................54 CA121004-8.........................54
CA121003-1167...................53 CA121003-73.......................53 CA121004-121.....................54 CA121004-80.......................54
CA121003-1168...................53 CA121003-74.......................53 CA121004-122.....................54 CA121004-81.......................54
CA121003-1169...................53 CA121003-75.......................53 CA121004-123.....................54 CA121004-82.......................54
CA121003-1170...................53 CA121003-76.......................53 CA121004-124.....................54 CA121004-9.........................54
CA121003-1171...................53 CA121003-77.......................53 CA121004-125.................... 54 CA121004-901.....................54
CA121003-1172...................53 CA121003-78.......................53 CA121004-126.....................54 CA121004-902.....................54
CA121003-12.......................53 CA121003-79.......................53 CA121004-127.....................54 CA121004-903.....................54
CA121003-121.....................53 CA121003-8.........................53 CA121004-128.....................54 CA121004-904.....................54
CA121003-122.....................53 CA121003-80.......................53 CA121004-129.....................54 CA121004-905.....................54
CA121003-123.....................53 CA121003-81.......................53 CA121004-130.....................54 CA121004-906.....................54
CA121003-124.....................53 CA121003-82.......................53 CA121004-131.....................54 CA121004-907.....................54
CA121003-125.....................53 CA121003-9.........................53 CA121004-132.....................54 CA121004-908.....................54
CA121003-126.....................53 CA121003-901.....................53 CA121004-141.....................54 CA121004-909.....................54
CA121003-127.....................53 CA121003-902.....................53 CA121004-143.....................54 CA121004-910.....................54
CA121003-128.....................53 CA121003-903.....................53 CA121004-144.....................54 CA121004-911.....................54
CA121003-129.....................53 CA121003-904.....................53 CA121004-145.....................54 CA121004-912.....................54
CA121003-130.....................53 CA121003-905.....................53 CA121004-146.................... 54 CA121004-142.....................54
CA121003-131.....................53 CA121003-906.....................53 CA121004-147.....................54 CA3105E10SL-B....................55
CA121003-132.....................53 CA121003-907.....................53 CA121004-148.....................54 CA3105E12S-B.....................55
CA121003-141.....................53 CA121003-908.....................53 CA121004-149.....................54 CA3105E14S-B.....................55
CA121003-142.....................53 CA121003-909.....................53 CA121004-150.....................54 CA3105E16-B.......................55
CA121003-143.....................53 CA121003-910.....................53 CA121004-151.....................54 CA3105E16S-B.....................55
CA121003-144.....................53 CA121003-911.....................53 CA121004-152.....................54 CA3105E18-B.......................55
CA121003-145.....................53 CA121003-912.....................53 CA121004-161.....................54 CA3105E20-B...................... 55
CA121003-146.....................53 CA121004-1.........................54 CA121004-162.....................54 CA3105E22-B.......................55
CA121003-147.....................53 CA121004-11.......................54 CA121004-163.....................54 CA3105E24-B.......................55
CA121003-148.....................53 CA121004-1141...................54 CA121004-164.....................54 CA3105E28-B.......................55
CA121003-149.....................53 CA121004-1142...................54 CA121004-165.....................54 CA3105E32-B.......................55
CA121003-150.....................53 CA121004-1143.................. 54 CA121004-166.....................54 CA3105E36-B...................... 55
CA121003-151.....................53 CA121004-1144...................54 CA121004-167.....................54 CAB80-10SL-D......................54
CA121003-152.....................53 CA121004-1145...................54 CA121004-168.....................54 CAB80-12S-D.......................54
CA121003-161.....................53 CA121004-1146...................54 CA121004-169.....................54 CAB80-14S-D.......................54
ittcannon.com
68
Part Number Page Part Number Page Part Number Page
CAB80-16-D.........................54 MS3057-8A..........................57 VG95234KA32.................... 53 VG95234KT32......................57

CAB80-16S-D.......................54 TH 452.................................61 VG95234KA36.................... 53 VG95234KT36......................57
CAB80-18-D.........................54 VG95234B00........................56 VG95234KB10SL................. 54 VG95234P0..........................59
CAB80-20-D.........................54 VG95234B04........................56 VG95234KB14S...................54 VG95234P10........................59
CAB80-22-D.........................54 VG95234B08........................56 VG95234KB16.....................54 VG95234P100......................59
CAB80-24-D.........................54 VG95234B12........................56 VG95234KB16S...................54 VG95234P10-001.................59
CAB80-28-D.........................54 VG95234B16........................56 VG95234KB18.....................54 VG95234P15........................59
CAB80-32-D.........................54 VG95234B16S......................56 VG95234KB20.....................54 VG95234P15-001.................59
CAB80-36-D.........................54 VG95234B20........................56 VG95234KB22.....................54 VG95234P15-002.................59
CAB81-10SL-D......................53 VG95234BOD10SL...............55 VG95234KB24.....................54 VG95234P15S......................59
CAB81-12S-D.......................53 VG95234BOD14S.................55 VG95234KB28.....................54 VG95234P15S-001...............59
CAB81-14S-D.......................53 VG95234BOD16...................55 VG95234KB32.....................54 VG95234P15S-002...............59
CAB81-16-D.........................53 VG95234BOD16S.................55 VG95234KB36.....................54 VG95234P160......................59
CAB81-16S-D.......................53 VG95234BOD18...................55 VG95234KC10SL..................54 VG95234P160-001...............59
CAB81-18-D........................ 53 VG95234BOD20...................55 VG95234KC14S................... 54 VG95234P25........................59
CAB81-20-D.........................53 VG95234BOD22...................55 VG95234KC16.....................54 VG95234P25-001.................59
CAB81-22-D.........................53 VG95234BOD24...................55 VG95234KC16S...................54 VG95234P4..........................59
CAB81-24-D.........................53 VG95234BOD28...................55 VG95234KC18.....................54 VG95234P500......................59
CAB81-28-D.........................53 VG95234BOD32...................55 VG95234KC20.....................54 VG95234P500-001...............59
CAB81-32-D.........................53 VG95234BOD36...................55 VG95234KC22.....................54 VG95234P500-002...............59
CAB81-36-D.........................53 VG95234DA10SL-X..............58 VG95234KC24.....................54 VG95234P60........................59
CET-0...................................65 VG95234DA14S-X................58 VG95234KC28.....................54 VG95234P60-001.................59
CET-4...................................65 VG95234DA16-X..................58 VG95234KC32.....................54 VG95234P8..........................59
CET-8...................................65 VG95234DA18-X..................58 VG95234KC36.....................54 VG95234S0..........................56
CET-F80-12..........................65 VG95234DA20-X..................58 VG95234KK10.....................57 VG95234S10........................56
CET-F80-16..........................65 VG95234DA22-X..................58 VG95234KK12.....................57 VG95234S100......................56
CET-F80-20..........................65 VG95234DA24-X..................58 VG95234KK16.....................57 VG95234S10-001................56
CIT 0....................................65 VG95234DA28-X..................58 VG95234KK20.....................57 VG95234S15........................56
CIT 12..................................65 VG95234DA32-X..................58 VG95234KK24.....................57 VG95234S15-001................56
CIT16...................................65 VG95234DA36-X..................58 VG95234KK4.......................57 VG95234S15-002 ................56
CIT 20..................................65 VG95234DH10SL-X..............58 VG95234KK6.......................57 VG95234S15S......................56
CIT 4....................................65 VG95234DH14S-X................58 VG95234KK8.......................57 VG95234S15S-001...............56
CIT 8....................................65 VG95234DH16-X.................58 VG95234KR10SL..................53 VG95234S15S-002...............56
CIT-F80-12...........................65 VG95234DH18-X.................58 VG95234KR14S....................53 VG95234S160......................56
CIT-F80-16...........................65 VG95234DH20-X.................58 VG95234KR16......................53 VG95234S160-001..............56
CIT-F80-20...........................65 VG95234DH22-X.................58 VG95234KR16S....................53 VG95234S25........................56
HP400EL-ITT.........................65 VG95234DH24-X.................58 VG95234KR18......................53 VG95234S25-001................56
HPW400U-ITT......................65 VG95234DH28-X.................58 VG95234KR20......................53 VG95234S4..........................56
HPW400U-ITT......................66 VG95234DH32-X.................58 VG95234KR22......................53 VG95234S500......................56
M22520-1-01......................65 VG95234DH36-X.................58 VG95234KR24......................53 VG95234S500-001..............56
M22520-1-01..................... 66 VG95234KA10SL..................53 VG95234KR28......................53 VG95234S500-002..............56
M22520-3-1........................66 VG95234KA14S...................53 VG95234KR32......................53 VG95234S60.......................56
MS3057-10A.......................57 VG95234KA16.....................53 VG95234KR36......................53 VG95234S60-001 ................56
MS3057-12A.......................57 VG95234KA16S...................53 VG95234KT10SL..................57 VG95234S8.........................56
MS3057-16A.......................57 VG95234KA18.....................53 VG95234KT14S....................57 WA10..................................66
MS3057-20A.......................57 VG95234KA20.................... 53 VG95234KT16......................57 WA27F-CE...........................66
MS3057-24A.......................57 VG95234KA22.................... 53 VG95234KT18......................57
MS3057-4A.........................57 VG95234KA24.................... 53 VG95234KT20......................57
MS3057-6A.........................57 VG95234KA28.................... 53 VG95234KT24......................57
ittcannon.com
69
Product Safety Information
1. MATERIAL CONTENT AND PHYSICAL 3. HANDLING (iii) Other important information. ITT
FORM Care must be taken to avoid damage to any continuously endeavors to improve its
Electrical connectors do not usually contain component parts of electrical connectors products. Therefore, the products may
hazardous materials. They contain during installation and use. Although there deviate from the description, technical data
conducting and non-conducting materials are normally no sharp edges, care must be and shape as shown in this catalogue and/
and can be divided into two groups: taken when handling certain components or data sheets.
a) Printed circuit types and low-cost audio to avoid injury to fingers. Electrical
types which employ all plastic insulators and connectors may be damaged in transit to 7. MISCELLANEOUS
casings; the customers, and damage may result in “Cannon” and “Veam” are brands of ITT, Inc.
b) Rugged, Fire Barrier and High Reliability creation of hazards. Products should (“ITT”). ITT’s connector products are
types with metal casings and either natural therefore be examined prior to installation/ intended to be used in accordance with the
rubber, synthetic rubber, plastic, or glass use and rejected if found to be damaged. specifications in this publication (and any
insulating materials. other relevant publications that are
Contact materials vary with type of 4. DISPOSAL applicable to the specific product). Any use
connector and application and are usually Incineration of certain materials may release or application that deviates from the stated
manufactured from either copper, copper noxious or even toxic fumes. operating specifications is not recommended
alloys, nickel, alumel, chromel or steel. In and may be unsafe. No information and
special applications, other alloys may be 5. APPLICATION data contained in this publication shall be
used. Connectors with exposed contacts should construed to create any liability on the part
not be selected for use on the current supply of ITT or its successors, assigns, officers,
side of an electrical circuit because an directors, employees, affiliates, and agents,
electric shock could result from touching including, but not limited to, any liability for
exposed contacts on an unmated connector. any patent infringements or other rights of
Voltages more than 30 V ac or 42.5 V dc are third parties which may result from its use.
2. FIRE CHARACTERISTICS AND ELECTRIC potentially hazardous, and care should be Any new issue of this publication shall
SHOCK HAZARD taken to ensure that such voltages cannot automatically invalidate and supersede all
There is no fire hazard when the connector be transmitted in any way to exposed metal previous issues. Reprinting this publication
is correctly wired and used within the parts of the connector body. The connector is generally permitted, provided that ITT’s
specified parameters. Incorrect wiring or and wiring should be checked before making prior written consent is obtained, and the
assembly of the connector or careless use of live to ensure that there is no damage to source is indicated.
metal tools or conductive fluids, or transit metal parts or insulators, no solder blobs,
damage to any of the component parts may loose strands, conducting lubricants, swarf, This publication is not to be construed as an
cause electric shock or burns. Live circuits or any other undesired conducting particles. offer. It is intended merely as an invitation
must not be broken by separating mated Circuit resistance and continuity check to make an offer. Product availability, prices,
connectors as this may cause arcing, should be made to make certain that there and delivery dates are exclusively subject to
ionization and burning. Heat dissipation is are no high resistance joints or spurious ITT’s order confirmation form; the same
greater at maximum resistance in a circuit. conducting paths. Always use the correct applies to orders based on development
Hot spots may occur when resistance is application tools as specified in the data samples delivered. Please refer to ITT’s Terms
raised locally by damage (e.g., cracked, or sheets/catalogues. and Conditions of Sale located at www.
deformed contacts, broken strands of wire). Do not permit untrained personnel to wire, ittcannon.com for the full text of the terms
Local overheating may also result from the assemble or tamper with connectors. For and conditions that apply to ITT’s connector
use of the incorrect application tools or from operation voltage please see appropriate products.
poor quality soldering or slack screw regulations for the applicable region/
terminals. Overheating may occur if the country. Commodities in this catalogue may be
ratings in the product data sheets/catalogues controlled for export by the International
are exceeded and can cause breakdown of 6. IMPORTANT GENERAL INFORMATION Traffic in Arms Regulations (ITAR) and Export
insulation and hence electric shock. If (i) Air and creepage paths/Operating Administration Regulations (EAR) when
heating is allowed to continue, it intensifies voltage. The admissible operating voltages specifically designed, modified, or
by further increasing the local resistance depend on the individual applications and configured for articles controlled by the
through loss of temper of spring contacts, the applicable safety regulations (including, United States Government.
formation of oxide film on contacts and but not limited to, region/country-specific
wires and leakage currents through regulations). For this reason, the air and
carbonization of insulation and tracking creepage path data are only reference
paths. Fire can then result in the presence values. A reduction of air and creepage
of combustible materials, and this may paths due to PC board and/or harnessing is
release noxious fumes. Overheating may not normal.
be visually apparent. Burns may result from
touching overheated components. (ii) Temperature. All information given are
temperature limits. The operation
temperature depends on the individual
application.
ittcannon.com
70
Notes
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
ittcannon.com
71
Connect with your ITT Cannon representative today
or visit us at ittcannon.com
Connect with the experts

ITT’s Cannon brand is a world leader in the design and manufacture of
highly engineered connector solutions for multiple end markets.
Why ITT
ITT is a focused multi-industrial company that designs and manufactures highly engineered critical components and customized technology
solutions. ITT’s Cannon brand is a leading global manufacturer of connector products serving international customers in aerospace, defense, medical,
industrial and transportation end markets. ITT’s Connector business, which also includes the Veam and BIW Connector Systems brand, manufactures
and supplies a variety of connectors and interconnects that make it possible to transfer data, signal and power in an increasingly connected world.
Connect with your ITT Cannon representative today or visit us at ittcannon.com Follow us
CHINA - Shenzhen City GERMANY - Weinstadt ITALY - Lainate KOREA SHANGHAI UK - Basingstoke
+86.755.2726.7888 +49.7151.699.0 +39.02938721 +82.2.702.7111 + 86.21.2231.2222 +44.1256.347400
FRANCE HONG KONG JAPAN - Kanagawa MEXICO - Nogales SINGAPORE USA - Irvine, CA
+33.1.60.04.93.93 +852.2732.2720 +81.462.57.2010 +52.631.311.0050 +65 66974205 +1.800.854.3028
The “ITT Engineered Blocks“ symbol, “ITT”, “Cannon” and “Veam“are registered trademarks of ITT Inc. © 2023 ITT Inc.
Specification and other data are based on information available at the time of printing, and are subject to change without notice. ITT Cannon CA B CAT 07/2023
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ITT Cannon:
CA3108F14S-9S-B-14 CA3108E18-9P-B-01 CA3100E10SL-4P-B-01 CA3100E16S-1S-B-A176 CA3100E16S-1S-B-
14 CA3101E10SL-3P-B-03 CA3102E20-23P-B-01-05 CA3102E22-14S-B-05 CA3101E20-29S-B-15 CA3100R20-
29P-B-F80 CA3101E10SL-4S-B-01 CA3100E16S-1P-B-05-14 CA3102E22-23P-B-01-A176 CA3100E16S-1P-B-02-05
CA3101E10SL-3S-B-03 CA3102E20-23S-B-01-05 CA3100E10SL-3S-B-03 CA3100F28-21P-B-F80 CA3100R20-
15S-B-01 CA3102E14SA7S-B-01-A232-F0 CA3100E10SL-3S-B-06 CA3102E20-15P-B-F80-05-A176 CA3101E20-
27S-B-01 CA3101E14S-2S-B-15-A232 CA3102E22-2S-B-05-A239 CA3102R10SL-3P-B CA3100E22-23S-B-02
CA3100E18-11P-B-15 CA3100E14S-6S-B-15-A232 CA3108E20-8P-B-F80 CA3100E22-7S-B-02 CA3102E24A24S-B
CA3101E14S-6S-B-F80-F42 CA3100E22-19S-B-02 CA3102E24-10S-B-F80-05 CA3102R20-15P-B CA3100E18-1S-
B-15-A232 CA3102E18-4P-B-01 CA3102E18-9P-B-01 CA3102E32-6P-B CA3100E14S-2S-B-15-A232 CA3101F28-
21S-B-01 CA3100E14S-6P-B-15-A232 CA3108E20-2S-B-F80 CA3100E22-7P-B-02 CA3102E10SL-3P-B-F80-A239
CA3100E22-23P-B-02 CA3100E28-11P-B-F80 CA3101E28A16S-B CA3102E22-2P-B-05-A239 CA3102E24-10P-B-
109 CA3100E24-22P-B-F97-F0 CA3101E14S-6P-B-15-A232 CA3101F28-21P-B-01 CA3100E18-1P-B-15-A232
CA3108E20-8S-B-F80 CA3102E24-10P-B-F80-05 CA3108E16S-8S-B-F80 CA3101E32-17S-B CA3100E18-4S-B
CA3101E16S-8P-B CA3100E28-22P-B-F80 CA3102E16-9S-B-109 CA3101F10SL-4S-B CA3102E18-20P-B-01
CA3100E28-21P-B-F80 CA3100E36-5P-B-03-05 CA3100E28-21S-B-F80 CA3100E36-5S-B-03-05 CA3108F10SL-4P-
B CA3108E16S-8P-B-F80 CA3102E24-9S-B CA3100E28-22S-B-F80 CA3108E10SL-4S-B-01-A233 CA3100E32-
5SWB CA3102E24-10P-B-F0 CA3102E18-4S-B-01 CA3102E18-9S-B-01 CA3100E36-5S-B-03 CA3101E14S-9S-B-
02 CA3108E20-33P-B-F80 CA3102E36-3P-B-F80-05 CA3100R10SL-3S-B-F80 CA3102E14S-6P-B-04 CA3102E24-
28S-B-F0 CA3100E22-2S-B-05-15 CA3102E18-3S-B CA3102E18-21S-B-01 CA3102E14S-6P-B-01 CA3102E20-
23P-B-F80-05 CA3102E20-4P-B-F80-F0 CA3102E36-5S-B-F80-05 CA3102E24-28P-B-F0 CA3100E22-2P-B-05-15
CA3102E14S-6S-B-01 CA3102E36-5P-B-F0 CA3102E36-3S-B-F80-05 CA3100E16S-1P-B-05-15 CA3100E10SL-3S-
B-15-A240 CA3102E14S-6S-B-04

Original 2887057

Uploaded by

Copyright:

Available Formats

Original 2887057

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Original 2887057

Uploaded by

Copyright:

Available Formats

CA Bayonet / VG95234

Oil & Gas

Commercial & Military Aerospace

Our connector portfolio remains

12/25 41 15S/15 16S/16 6

4/160 135 60/100 8 1

0/500 245 160 4 0,5

Derating Curves according to VG 95234 Standard insulator material > 1000 MΩ

Air and creepage paths (min.)

Shell size ø d1 (H12*) ø d2 (H13*) E Screws to be used

Harnessing Wire Stripping

Connector style D or Connector style E, E1 and K or

10SL 70 70 70 65 75 8,0 3,5

CA 3106 E 18– 1 S X B – ***

20A9 20A9 ­Instr.

9 28A16 28A16 0 – – – – – 2 260

35 32-7 32-7 ­Instr.

No solder pot contacts available for #10/20 contacts.

*Reduced contact termination 0,3 mm2.

Special Insert Positions

VG95234 Can­non d1 d2 d3 l1 l2 l3 l4 Weight1)

VG95234A-10SL-* CA3102E10SL-**-B 16,2 3,2 18,2 24,7 14,2 2,8 25,4 12

CA02L-B, additional modifications on page 12.

VG95234 Style BI (with threaded holes in flange).

CA20L-B, additional modifications on page 12.

VG95234 Can­non d2 C2 d3 e l1 l2 l3 l4 Weight1)

VG95234CX-10SL-* TBF10SL-*B-*** M4 3,2 18,2 18,2 37,5 14,2 2,8 25,4 17

*Drilling tolerances according to DIN ISO 286

Straight Plug with cable clamp

VG95234 Can­non d1 d22) l1 l2 l3 l4 Weight1)

VG95234D-10SL-* CA3106E10SL-**B-*** 22,8 6,5 115 55 22,7 22,7 30

Cable Connection Receptacle with cable clamp

VG95234 Can­non d1 d3 l1 l2 l3 l4 l5 l7 Weight1)

VG95234 Can­non d1 d2 d3 d4 d4 l1 l2 Weight1)

VG95234G-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24

Straight Plug for flex tube

VG95234 Can­non d1 d22) l1 l2 Weight1)

VG95234H-10SL-* CA3106F10SL-**B-*** 5/8-24NEF-2A 22,8 8,2 50 9,5 21

VG95234 – Style J1.

Plug 90°, Shielded for flex tube

VG95234 Can­non d1 I1 I2 I3 Weight1)

VG95234 Can­non d22) I2 Weight1)

Straight Plug, shielded

VG95234 Can­non d1 d22) d3 d4 l1 l2 l3 Weight1)

VG95234 – Style N1.

VG95234 Can­non d1 d2 Thread H13* d3 d42) d5 e l1 l2 l3 l4 Weight1)

VG95234 Can­non d1 d3 d3 d4 d5 l1 l2 Weight1)

VG95234 – Style U1.

VG95234 Can­non d1 Ød2 d3 d5 e l1 l2 l3 l4 Weight1)

Cable Connection Receptacle for heat shrink boots

VG95234 Can­non d1 d22) d3 d4 d5 l1 l2 l3 l4 Weight1)

CA3100E-B-08, additional modifications on page 12.

Can­non d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Wall Mounting Receptacle, 90°, for flex tube

CA3100F-B-08, additional modifications on page 12.

CA3100E-B-08, additional modifications on page 12.

Can­non d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Wall Mounting Receptacle, 90°, for flex tube

Shell size ø d1 (H12) ø d2 (H13) E Screws to be used

20A9 20A9 Instr.

35 32-7 32-7 Instr.

VG95234 Cannon d1 d2 d3 l1 l2 l3 l4 Weight1)

VG95234 Cannon d2 C2 d3 e l1 l2 l3 l4 Weight1)

VG95234 Cannon d1 d22) l1 l2 l3 l4 Weight1)

VG95234D-10SL-* CA3106E10SL-B-* 22,8 6,5 115 55 22,7 22,7 30

VG95234 Cannon d1 d3 l1 l2 l3 l4 l5 l7 Weight1)

VG95234 Cannon d1 d2 d3 d4 d4 l1 l2 Weight1)

VG95234G-10SL-* CA3106E10SL-B-* 22,8 17,0 15,5 13,3 7,7 50 11,7 24

VG95234 Cannon d1 d22) l1 l2 Weight1)

VG95234H-10SL-* CA3106F10SL-B-* 5/8-24NEF-2A 22,8 8,2 50 9,5 21

VG95234 Cannon d1 I1 I2 I3 Weight1)

VG95234 Cannon d22) I2 Weight1)

VG95234 Cannon d1 d22) d3 d4 l1 l2 l3 Weight1)

VG95234 Cannon d1 d2 Thread H13* d3 d42) d5 e l1 l2 l3 l4 Weight1)

VG95234 Cannon d1 d3 d3 d4 d5 l1 l2 Weight1)

VG95234 Cannon d1 Ød2 d3 d5 e l1 l2 l3 l4 Weight1)

VG95234 Cannon d1 d22) d3 d4 d5 l1 l2 l3 l4 Weight1)

Cannon d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Cannon d1 d2 d32) e I1 l2 l3 l4 l5 l6 l7 Weight1)

Cannon d1 d2 d32) d4 e l1 l2 l3 l4 Weight1)

Cannon d1 d22) d3 d4 l1 l2 l3 l4 l5 Weight1)

CA3101F10SL--B-* 18,2 8,2 5/8-24NEF-2A 25,2 52 18,2 2,8 9,5 20,6 35

Cannon d1 d2 d32) d4 e l1 l2 l3 l4 l5 Weight1)

Cannon ød1 l1 Entry Ød3 Ød5 Ød6

CA00DT-…-B--Dxx- and modification -05

Cannon Ød1 Ød2 l1 l2 l3 l4 e Entry

Cannon Ød1 Ød4 l1 l2 l3 Entry