Physics Project 2023-24
Physics Project 2023-24
S Public school
Department of physics
CERTIFICATE
This is to certify that Ayashkant Mishra, a student of
class XII-A has successfully completed the research
on the below mentioned project under the guidance
of Mr. Manas Naik ( Subject Teacher ) during the
year 2014-15 in partial fulfillment of physics practical
examination conducted by AISSCE, New Delhi.
Ayashkant Mishra
INDEX
1. CERTIFICATE OF EXCELLENCE
2. ACKNOWLEDGEMENT
3. AIM OF PROJECT
4. INTRODUCTION
5. THEORY
6. APPARATUS REQUIRED
7. PROCEDURE FOLLOWED
8. USES OF TRANSFORMERS
9. CONCLUSION
10. PRECAUTIONS
12. BIBILIOGRAPHY
AIM OF THE PROJECT
and
Es / Ep = - Ns / Np ______________ (3)
Ip = E – Ep / Rp
E – Ep = Ip Rp
Es / Ep = Es / E
= Ns / Np = K
If
And
And
Or
Ep Ip = Es Is
Or
Es / Ep = Ip / Is = K
ILLUSTRATION
IN A STEP UP TRANSFORMER
1. Copper loss is the energy loss in the form of heat in the copper
coils of a transformer. This is due to joule heating of conducting
wires.
2. Iron loss is the energy loss in the form of heat in the iron core
of the transformer. This is due to formation of eddy currents in
iron core. It is minimized by taking laminated cores.
IRON ROD
COPPER WIRE
VOLTMETRE
AMMETRE
CIRCUIT DIAGRAM
PROCEDURE FOLLOWED
1.Take thick iron rod and cover it with a thick paper and wind a
large number of turns of thin Cu wire on thick paper (say 60). This
constitutes primary coil of the transformer.
3. Connect p1, p2 to A.C main and measure the input voltage and
current using A.C voltmeter and ammeter respectively.
5. Now connect s1and s2to A.C main and again measure voltage
and current through primary and secondary coil of step up
transformer.
1. In voltage regulator for T.V., refrigerator, computer, air
conditioner, etc.
SOURCES OF ERROR