SACC-M12FR-4CON-PG7 - Connector

1681130
https://www.phoenixcontact.com/us/products/1681130

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.

Connector, Universal, 4-position, Socket angled M12, coding: A, Screw connection, knurl
material: Plastic, cable gland Pg7, external cable diameter 4 mm ... 6 mm

Your advantages
• Safe use in the field, thanks to a high degree of protection
• Screw connection: proven connection technology for a large selection of different conductors

Commercial data
Item number 1681130
Packing unit 1 pc
Sales key BF30
Product key BF2CAA
Catalog page Page 22 (C-2-2019)
GTIN 4017918157395
Weight per piece (including packing) 15.9 g
Weight per piece (excluding packing) 15.9 g
Customs tariff number 85366990
Country of origin DE
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Technical data

Notes
General
NOTE: Observe the permissible bending radii when laying
conductors, since the degree of protection may be put in
jeopardy if the bending forces are too high. Alleviate mechanical
loads upstream of the connector, e.g. by using cable ties.

Mounting
Assembly instructions The connector pin assignment can be rotated 90° to the cable
outlet
Connection method Screw connection

Product properties
Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 4
No. of cable outlets 1
Shielded no
Coding A
Cable outlet angled
Pg screw connection Pg7

Insulation characteristics
Overvoltage category II
Degree of pollution 3

Dimensions
Dimensional drawing

Length 35 mm

External dimensions
Outside diameter 4 mm ... 6 mm

Housing
Diameter housing 20 mm

Material specifications
Flammability rating according to UL 94 HB
Seal material NBR
Material of grip body PA
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Contact material CuZn

Contact surface material CuSnZn
Contact carrier material PA
Material for screw connection Plastic

Connection data

Conductor connection
Connection method Screw connection
Connection cross section 0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.75 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Connection cross section AWG 24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Stripping length of the individual wire 5 mm
Tightening torque 0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)

Electrical properties
Rated surge voltage 2.5 kV
Contact resistance ≤ 8 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 250 V AC
250 V DC
Nominal current IN 4A

Mechanical properties

Mechanical data
Insertion/withdrawal cycles ≥ 50

Connector

Connection 1
Head design Socket
Head cable outlet angled
Head thread type M12
Coding A

Cable/line
Signal type/category Universal
Stripping length of the individual wire 5 mm

Environmental and real-life conditions

Ambient conditions
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Degree of protection IP67

Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)

Standards and regulations

M12
Standard designation M12 connector
Standards/specifications IEC 61076-2-101
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Drawings

Dimensional drawing

Ø19,6
18 M12x1

13
Ø4..6

35
41

M12 x 1 socket, angled

SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Schematic diagram
Angular housing

Female insert with

threaded ring

Gasket

Clamping cage
Insulating sleeve
Pressure screw

Threaded sleeve

Male/Female M12
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Schematic diagram

3 4

2 1

Pin assignment M12 socket, 4-pos., A-coded, view female side

SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Schematic diagram

1 5
2
4
3

Cable connection side M12 (screw connection)

Dimensional drawing

20
M12

18
35
14,8

41

M12 x 1 socket, angled

SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1681130

cUL Recognized
 Approval ID: FILE E 221474

Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2
250 V 4A - -

UL Recognized
 Approval ID: FILE E 221474

Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2
250 V 4A - -

EAC
 Approval ID: RU C-DE.BL08.B.00511

cULus Recognized
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Classifications

ECLASS
ECLASS-11.0 27440102
ECLASS-12.0 27440116
ECLASS-13.0 27440116

ETIM
ETIM 9.0 EC002635

UNSPSC
UNSPSC 21.0 39121400
SACC-M12FR-4CON-PG7 - Connector
1681130
https://www.phoenixcontact.com/us/products/1681130

Environmental product compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 50 years

For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”