NDJ Drip Eng 160914

DRIP IRRIGATION
NaanDanJain's dripline technologies provide efficient, flexible

and cost-effective solutions for a wide range of crops in diverse
conditions, tailored to varied customer needs. Our extensive
product range includes pressure-compensating driplines,
traditional driplines, thin-walled driplines, button drippers and
LayFlats.
Contents
AGRICULTURE
Introduction..............................................................................3
Inline dripers
Pressure-compensating
Thick-walled driplines
AmnonDrip.........................................................................4-10
TopDrip HD......................................................................11-13
Naan PC..............................................................................14-17
Thin-walled driplines
TopDrip.............................................................................18-20
Naan PC light...........................................................................21
Non Pressure-compensating
Thick-walled driplines
TifDrip................................................................................22-23
J Turbo-Line12 mm..................................................................32
Thin-walled driplines and tapes
TalDrip...............................................................................24-25
Chapin-Drip Tape.............................................................26-29
NDJ DripKit....................................................................30-31
Online button drippers

TurboDrip........................................................................33
Click Tif HD..............................................................................34
Click Tif HD Accessories........................................................35
J-SC-PC-Plus...........................................................................36
J-Turbo Key Plus......................................................................37
Accessories (for drip systems)
Lateral Flush Valve...................................................................38
Lateral LPD..............................................................................39
Connectors.......................................................................40-41
Lay Flat.........................................................................42-43
LANDSCAPE DRIPLINES
© NAANDANJAIN Ltd. 09/2014
JardiLine...................................................................................44
Super JardiLine.........................................................................45
System Maintenance...................................46-47
This catalog and more information on our products range and company is available on line please visit our website: www.naandanjain.com
2
Introduction
NaanDanJain develops, manufactures and markets NaanDanJain’s dripline range provides optimum
the largest selection of comprehensive irrigation solutions for subsurface drip irrigation, organic
technologies in the world, designed for economical agriculture, greenhouse technologies, and ecological
and efficient water, management. applications.
With over seventy years of experience, the NaanDanJain’s 800-hectare farm includes open
company operates in over 90 countries in all fields, citrus orchards and avocado plantations that
continents, meeting all the requirements of serve as a large scale testing site for the company’s
efficient modern irrigation. NaanDanJain’s wide intensive R&D.
range of dripline technologies provides efficient,
flexible and cost-effective solutions for a wide NaanDanJain’s state-of-the-art dripline laboratory
range of crops in diverse conditions, tailored to operates according to the international NaanDanJain is a
varied customer needs. ISO 9001:2008 and ISO 14001:2004 certified company.
The Cascade Labyrinth

The Cascade Labyrinth incorporated in all our HYDRAULIC CHARACTERISTIC OF THE
drippers signifies a breakthrough in low-volume LABYRINTH
labyrinth systems. The unique structure of The regulating ratio of the Cascade labyrinth is
the dripper facilitates intensified self-cleaning, 1:2.2 - while the pressure is doubled, the flow rate
preventing clogging and vastly improving changes only by 45%.
durability.
ADVANTAGES
• Reliable use of low-volume drippers VELOCITY VECTORS IN THE CASCADE
• Unique self-cleaning operation LABYRINTH
• Wider water passages
• Very high resistance to clogging
• Long-term flow accuracy and uniformity
• Longer laterals
• Lower costs per area
• Extended product life
DOUBLE FLOW SYSTEM
The Cascade labyrinth teeth create a double-flow
regime that combines rapid central flow with
cyclone turbulence, facilitating constant cleaning
and flushing. This prevents clogging and improves
dripper durability.
EFFICIENT SELF-CLEANING
During the self-cleaning process, dirt and sand
particles that penetrate the filtration system Fast central flow
are washed away, preventing sedimentation and Cyclone turbulence, self cleaning flow
clogging.
3
THICK-WALLED PC FLAT DRIPLINE
AmnonDrip PC, CNL & PC AS

Innovative, pressure-
compensating (PC) dripline with
special anti-syphon (AS)
and compensating non- leakage
(CNL) models. Cascade labyrinth
feature incorporated in all
drippers
APPLICATIONS AmnonDrip PC
• Ideal solution for irrigation in topographically challenging
terrain, and where long laterals are required
• CNL option for pulse irrigation of orchards, open field
crops and greenhouses 1.1, 1.6, 2.2, 3.8 l/h
• Subsurface Drip Irrigation (SDI), for accurate irrigation
of orchards, open field crops and greenhouses AmnonDrip CNL
STRUCTURE AND FEATURES
• Pressure- compensating (PC) enabling water
application accuracy at variable topography and the
installation of long laterals 1.1, 1.6, 2.2, 3.8 l/h
• Efficient self-cleaning turbulence provided by the
Cascade labyrinth AmnonDrip PC AS
• Hydrodynamic dripper design ensures continuous
flushing of sediments and small dirt particles
• Low CV for maximal uniformity
1.1, 1.6, 2.2, 3.8 l/h
• Weir structure improves root intrusion resistance
and sand suction
• 3D water inlet structure improves clog resistance
• High-quality silicon diaphragm
• Both carton and coil package options are available (see
packing and shipping table)
TECHNICAL DATA
• Colored cap facilitates easy identification of dripper models
• Flow rates: 1.1, 1.6, 2.2, 3.8 l/h
SPECIAL MODELS • CNL: Opening pressure - 1 bar

• CNL: Pressure-compensating non-leakage design Closing pressure - 0.2 bar
reduces lateral filling time and facilitates pulse • AS: Opening pressure - 0.5 bar
irrigation • Pressure regulating range:
• PC AS: Pressure compensating anti-syphon design PC & AS models - 0.5-4.0 bar
prevents suction at draining stage. Suitable for PC CNL - 1.0-4.0 bar
subsurface drip irrigation • Recommended filtration: 130 micron (120 mesh)
4
AmnonDrip PC, CNL & PC AS BOTTOM VIEW

TECHNICAL DATA TOP VIEW
Weir design prevents root
Nominal Wall Maximum Connector instrusion and sand suction
OD ID
diameter thickness Pressure KD type
(mm) (mm) Filter with side water inlets
(mm) (mm) (mil) (bar) Barb Tape
16 0.63 25 15.16 13.9 2.5 0.92 ●
16 0.90 35 15.70 13.9 3.0 0.92 ●
16 1.00 39 15.90 13.9 3.5 0.92 ●
16 1.15 45 16.20 13.9 3.5 0.92 ●
Large, double-
17 0.63 25 16.90 15.6 2.5 0.75 ● purpose diaphragm
17 0.90 35 16.20 14.4 3.0 0.75 ●
17 1.00 39 16.40 14.4 3.0 0.75 ●
17 1.20 47 17.00 14.4 3.5 0.75 ●
20 1.00 39 19.70 17.70 3.0 0.65 ●
20 1.20 47 20.10 17.70 3.5 0.65 ●
23 1.00 39 22.80 20.8 3.0 0.14 ●
Non-drainage and anti-syphon Cascade
labyrinth wide
water passage
and strong
self-cleaning
AMNONDRIP PACKAGING AND SHIPPING operation
Carton spools
Nominal Wall Standard Coils per Coils per Coils per
diameter thickness coil length 20 ft. 40 ft. 40 ft. HC
(mm) (mm) (m) container container container
16 0.63 600 320 640 720
16 0.90 400 320 640 720
16 1.00 400 320 640 720
17 0.63 600 320 640 720
17 0.90 400 320 640 720
17 1.00 400 320 640 720
20 0.90 300 320 640 720
20 1.00 300 320 640 720
23 1.00 300 320 640 720
Coils
16 0.90 500 150 320 360
16 1.00 500 150 320 360
16 1.15 500 150 320 360
17 0.90 500 150 320 360
17 1.00 500 150 320 360
17 1.20 500 150 320 360

20 1.00 300 150 345 365
20 1.20 300 150 345 365
* Dripper spacing can affect coil length.
Available also in brown, white, purple or any other color for a

minimum order of 40K m
5
AmnonDrip 16mm
HEAD LOSS (m) IN RELATION TO LATERAL LENGTH (m), DRIPPER FLOW RATE AND SPACING (cm)
AmnonDrip 16, 1.1l/h, W.T 0.9-1.15mm, ID 13.9 AmnonDrip 16, 1.6l/h, W.T 0.9-1.15mm, ID 13.9 AmnonDrip 16, 2.2l/h, W.T 0.9-1.15mm, ID 13.9 AmnonDrip 16, 3.8 l/h, 0.9-1.15mm, ID 13.9
Dripper spacing (cm) Dripper spacing (cm) Dripper spacing (cm) Dripper spacing (cm)
Lateral Lateral Lateral Lateral
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 0.70 100
20 0.2 0.1 20 0.3 0.1 0.1 20 0.5 0.2 0.1 0.1 20 1.2 0.5 0.3 0.1 0.1 0.1
40 0.9 0.4 0.2 0.1 0.1 0.1 40 1.8 0.7 0.4 0.2 0.1 0.1 0.1 40 3 1.2 0.6 0.4 0.3 0.2 0.1 40 7.7 3.0 1.6 1.0 0.7 0.5 0.2
60 2.8 1.1 0.6 0.3 0.2 0.2 0.1 60 5.2 2.1 1.1 0.6 0.4 0.3 0.1 60 9 3.6 1.9 1.1 0.7 0.5 0.3 60 22.9 9.2 4.8 2.9 2.0 1.4 0.7
80 6 2.3 1.2 0.7 0.5 0.4 0.2 80 11.4 4.5 2.3 1.4 1 0.7 0.3 80 19.6 7.7 4.0 2.5 1.7 1.2 0.6 80 19.9 10.4 6.4 4.4 3.2 1.5
100 11 4.3 2.2 1.4 0.9 0.6 0.3 100 20.8 8.2 4.3 2.6 1.7 1.2 0.6 100 14.2 7.4 4.5 3.1 2.2 1.1 100 19.2 11.8 8.0 5.8 2.8
120 18 7.1 3.7 2.2 1.5 1.1 0.5 120 13.5 7 4.3 2.9 2.1 1 120 23.4 12.2 7.5 5.1 3.6 1.7 120 19.5 13.3 9.6 4.6
140 10.7 5.6 3.4 2.3 1.6 0.8 140 20.4 10.7 6.5 4.4 3.1 1.5 140 18.6 11.4 7.7 5.5 2.7 140 20.3 14.5 7.1
160 15.4 8 4.9 3.3 2.4 1.1 160 15.4 9.4 6.4 4.6 2.2 160 16.5 11.1 8.0 3.8 160 21.2 10.2
180 21.2 11.1 6.8 4.6 3.3 1.5 180 21.2 13 8.8 6.4 3 180 22.8 15.5 11.2 5.3 180 14.1
200 14.8 9 6.1 4 2.1 200 17.4 11.8 8.4 4 200 20.7 14.8 7.1 200 18.9
220 19.2 11.7 7.9 5.7 2.7 220 22.6 15.3 11 5.3 220 19.4 9.3 220
240 24.3 14.9 10.1 7.2 3.4 240 19.5 14 6.7 240 24.6 11.8 240
260 18.5 12.5 9 4.3 260 24.3 17.5 8.3 260 14.7 260
280 22.7 15.3 11.1 5.2 280 21.5 10.2 280 18.1 280
300 18.6 13.4 6.3 300 25.9 12.4 300 21.9 300
320 22.2 16 7.6 320 14.8
340 18.9 9 340 17.5
360 22.1 10.5 360 20.6
380 25.6 12.2 380 23.9
400 14.1
420 16.1
440 18.4
460 20.8
480 23.4
6
AmnonDrip 17mm - W.T 0.63mm
AmnonDrip 17, 1.1l/h, W.T 0.63 mm, ID 15.6 AmnonDrip 17, 1.6l/h, W.T 0.63 mm, ID 15.6 AmnonDrip 17, 2.2l/h, W.T 0.63 mm, ID 15.6 AmnonDrip 17, 3.8l/h, W.T 0.63 mm, ID 15.6
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
length(m))
20 0.1 20 0.1 0.0 0.0 0.0 0.0 0.0 0.0 20 0.2 0.1 0.0 0.0 0.0 0.0 0.0 20 0.6 0.2 0.1 0.1 0.0 0.0 0.0
40 0.4 0.1 0.1 40 0.8 0.3 0.1 0.1 0.1 0.0 0.0 40 1.6 0.6 0.3 0.2 0.1 0.1 0.0 40 4.5 1.6 0.8 0.5 0.3 0.2 0.1
60 1.3 0.5 0.2 0.1 0.1 0.1 60 2.8 1.0 0.5 0.3 0.2 0.1 0.1 60 5.1 1.8 0.9 0.5 0.3 0.2 0.1 60 15 5.2 2.6 1.5 1.0 0.7 0.3
80 3.1 1.1 0.5 0.3 0.2 0.1 0.1 80 6.4 2.3 1.1 0.7 0.4 0.3 0.1 80 12.0 4.2 2.1 1.2 0.8 0.6 0.3 80 35 12.2 5.9 3.4 2.3 1.6 0.7
100 6.0 2.1 1.0 0.6 0.4 0.3 0.1 100 12.4 4.4 2.1 1.3 0.8 0.6 0.3 100 23.2 8.1 4.0 2.3 1.5 1.1 0.5 100 23.5 11.3 6.6 4.3 3.0 1.4
120 10.2 3.6 1.8 1.0 0.7 0.5 0.2 120 21.3 7.4 3.6 2.1 1.4 1.0 0.4 120 13.8 6.7 3.9 2.6 1.8 0.8 120 19.4 11.2 7.3 5.1 2.3
140 16.2 5.7 2.8 1.6 1.1 0.8 0.3 140 33.6 11.7 5.7 3.3 2.2 1.5 0.7 140 21.8 10.6 6.2 4.0 2.8 1.3 140 30.4 17.6 11.5 8.0 3.6
160 24.0 8.4 4.1 2.4 1.6 1.1 0.5 160 17.4 8.5 4.9 3.2 2.3 1.0 160 32.3 15.6 9.1 5.9 4.2 1.9 160 26.0 16.9 11.8 5.3
180 33.9 11.8 5.8 3.4 2.2 1.6 0.7 180 24.5 11.9 7.0 4.5 3.2 1.4 180 22.1 12.8 8.3 5.9 2.6 180 23.8 16.6 7.4
200 16.2 7.9 4.6 3.0 2.1 1.0 200 33.4 16.2 9.5 6.2 4.3 2.0 200 30.0 17.4 11.4 7.9 3.6 200 32.4 22.5 10.1
220 21.4 10.4 6.1 4.0 2.8 1.3 220 21.5 12.5 8.1 5.7 2.6 220 23.0 15.0 10.5 4.7 220 29.8 13.3
240 27.6 13.4 7.8 5.1 3.6 1.6 240 27.7 16.1 10.5 7.3 3.3 240 29.7 19.3 13.5 6.0 240 17.1
260 17.0 9.9 6.5 4.5 2.0 260 20.3 13.2 9.3 4.2 260 24.4 17.0 7.6 260 21.5
280 21.1 12.3 8.0 5.6 2.5 280 25.3 16.4 11.5 5.2 280 30.2 21.1 9.4 280 26.7
300 25.8 15.0 9.8 6.9 3.1 300 20.0 14.0 6.3 300 25.8 11.5
320 18.1 11.8 8.3 3.7 320 24.2 16.9 7.6 320 13.9
340 21.7 14.1 9.9 4.4 340 28.9 20.2 9.1 340 16.6
360 25.6 16.6 11.7 5.2 360 23.8 10.7 360 19.5
380 19.5 13.6 6.1 380 27.9 12.5 380 22.9
400 22.6 15.8 7.1 400 14.5 400 26.5
420 26.1 18.3 8.2 420 16.7
440 20.9 9.4 440 19.1
460 23.8 10.7 460 21.7
480 26.9 12.1 480 24.6
500 13.6 500 27.6
7
AmnonDrip 17mm - W.T 0.9-1.2mm
AmnonDrip 17, 1.1l/h, W.T 0.9-1.2mm, ID 14.4 AmnonDrip 17, 1.6l/h, W.T 0.9-1.2mm, ID 14.4 AmnonDrip 17, 2.2l/h, W.T 0.9-1.2mm, ID 14.4 AmnonDrip 17mm, 3.8 l/h ,W.T 0.9-1.2mm, I.D 14.4
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
40 0.7 0.3 0.1 0.1 0.1 40 1.3 0.5 0.3 0.2 0.1 0.1 40 2.2 0.9 0.5 0.3 0.2 0.1 0.1 20 1 0.4 0.2 0.1 0.1 0.1
60 2 0.8 0.4 0.3 0.2 0.1 0.1 60 3.7 1.5 0.8 0.5 0.3 0.2 0.1 60 6.3 2.6 1.4 0.9 0.6 0.4 0.2 40 6.5 2.5 1.3 0.7 0.5 0.4 0.2
80 4.3 1.7 0.9 0.6 0.4 0.3 0.1 80 8 3.3 1.7 1.1 0.7 0.5 0.3 80 13.7 5.6 3 1.9 1.3 0.9 0.5 60 19.2 7.4 3.8 2.2 1.5 1 0.5
100 7.8 3.2 1.7 1 0.7 0.5 0.2 100 14.6 6 3.2 2 1.3 1 0.5 100 24.9 10.3 5.5 3.4 2.3 1.7 0.8 80 15.8 8.1 4.8 3.2 2.3 1.1
120 12.7 5.2 2.7 1.7 1.2 0.8 0.4 120 23.7 9.8 5.2 3.2 2.2 1.6 0.8 120 16.8 9 5.6 3.9 2.8 1.4 100 14.7 8.8 5.9 4.2 1.9
140 19.1 7.8 4.2 2.6 1.8 1.3 0.6 140 14.8 7.9 4.9 3.4 2.4 1.2 140 25.4 13.7 8 5.9 4.3 2.1 120 24.1 14.5 9.8 6.9 3.2
160 11.2 6 3.7 2.5 1.8 0.9 160 21.2 11.4 7.1 4.9 3.5 1.7 160 19.7 12.4 8.5 6.2 3 140 22.1 14.8 10.4 4.9
180 15.3 8.2 5.1 3.5 2.5 1.2 180 15.7 9.8 6.7 4.9 2.4 180 17.1 11.8 8.6 4.2 160 21.2 15.1 7
200 20.4 11 6.8 4.7 3.4 1.6 200 20.9 13.1 9 6 3.2 200 22.8 15.7 11.4 5.6 180 20.9 9.7
220 14.2 8.8 6 4.4 2.1 220 17 11.6 8.5 4.1 220 20.4 14.9 7.3 200 12.9
240 18 11.2 7.7 5.6 2.7 240 21.5 14.8 107 5.3 240 18.8 9.3 220 16.8
260 22.4 14 9.6 7 3.4 260 18.5 13.4 6.6 260 23.6 11.6 240 21.3
280 17.1 11.7 8.5 4.1 280 22.6 16.5 8 280 14.2
300 20.7 14.2 10.3 5 300 19.9 9.7 300 17.2
320 24.6 16.9 12.3 6 320 23.9 11.6 320 20.5
340 20 14.5 7.1 340 13.8 340 24.3
360 23.3 17 8.3 360 16.1
380 19.7 9.6 380 18.7
400 22.8 11.1 400 21.6
420 12.7 420 24.7
440 14.4
460 16.3
480 18.4
500 20.6
8
AmnonDrip 20mm
AmnonDrip 20, 1.1l/h, W.T 1.0-1.2mm, ID 17.7 AmnonDrip 20, 1.6l/h, W.T 1.0-1.2mm, ID 17.7 AmnonDrip 20, 2.2l/h, W.T 1.0-1.2mm,ID 17.7 AmnonDrip 20, 3.8 l/h ,W.T 1.0-1.2mm, ID 17.7
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
40 0.5 0.2 0.1 0.1 0.1 40 0.9 0.4 0.2 0.1 0.1 0.1 40 1.3 0.6 0.3 0.2 0.1 0.1 0.1 20 0.5 0.2 0.1 0.1 0.1
60 1.3 0.6 0.3 0.2 0.1 0.1 0.1 60 2.1 1 0.5 0.3 0.2 0.2 0.1 60 3.2 1.5 0.8 0.5 0.4 0.3 0.1 40 2.6 1.2 0.7 0.4 0.3 0.2 0.1
80 2.6 1.1 0.6 0.4 0.3 0.2 0.1 80 4.1 1.8 1 0.7 0.5 0.3 0.2 80 6.3 2.8 1.6 1 0.7 0.5 0.3 60 6.8 3.1 1.7 1.1 0.8 0.6 0.3
100 4.3 1.9 1.1 0.7 0.5 0.3 0.2 100 6.9 3.1 1.7 1.1 0.8 0.6 0.3 100 10.7 4.8 2.7 1.7 1.2 0.9 0.5 80 13.5 6.1 3.5 2.2 1.6 1.2 0.6
120 6.5 2.9 1.6 1 0.7 0.5 0.3 120 10.7 4.8 2.7 1.7 1.2 0.9 0.4 120 16.6 7.5 4.2 2.7 1.9 1.4 0.7 100 23.3 10.6 6 3.9 2.7 2 1
140 9.2 4.1 2.3 1.5 1 0.8 0.4 140 15.4 6.9 3.9 2.5 1.8 1.3 0.7 140 24 10.8 6.1 4 2.8 2.1 1 120 16.6 9.4 6.1 4.4 3.2 1.6
160 12.7 5.6 3.2 2 1.4 1.1 0.5 160 21.2 9.5 5.4 3.5 2.4 1.8 0.9 160 15 8.5 5.5 3.9 2.9 1.5 140 24.4 13.9 9.1 6.4 4.7 2.4
180 16.7 7.4 4.2 2.7 1.9 1.4 0.7 180 12.6 7.2 4.6 3.3 2.4 1.2 180 20.1 11.4 7.4 5.2 3.9 2 160 19.6 12.7 9 6.7 3.4
200 21.4 9.6 5.4 3.5 2.4 1.8 0.9 200 16.3 9.3 6 4.2 3.1 1.6 200 14.9 9.6 6.8 5 2.5 180 26.5 17.2 12.2 9.1 4.6
220 12.1 6.8 4.4 3.1 2.3 1.1 220 20.7 11.7 7.6 5.3 4 2 220 18.9 12.3 8.6 6.4 3.2 200 22.6 16 11.9 6.1
240 14.8 8.4 5.4 3.8 2.8 1.4 240 25.6 14.6 9.4 6.6 4.9 2.5 240 23.6 15.3 10.8 8 4.1 220 20.5 15.3 7.8
260 18 10.2 6.6 4.6 3.4 1.7 260 17.8 11 8.1 6 3 260 18.8 13.2 9.8 5 240 25.9 19.2 9.8
280 21.6 12.3 7.9 5.5 4.1 2.1 280 21.4 13.9 9.7 7.3 3.6 280 22.7 16 11.9 6 260 23.7 12.1
300 25.6 14.5 9.4 6.6 4.9 2.4 300 25.5 16.5 11.6 8.6 4.3 300 19.2 14.2 7.2 280 14.7
320 17.1 11 7.7 5.7 2.9 320 19.4 13.7 10.2 5.1 320 22.6 16.8 8.5 300 17.7
340 19.9 12.8 9 6.7 3.3 340 22.7 16 11.9 6 340 19.7 10 320 21
360 22.9 14.8 10.4 7.7 3.9 360 18.5 13.8 6.9 360 22.9 11.6 340 24.7
380 16.9 11.9 8.8 4.4 380 21.3 15.8 8 380 13.4
400 19.3 13.5 10 5 400 24.2 18 9.1 400 15.3
420 21.8 15.3 11.4 5.7 420 20.5 10.3 420 17.4
440 24.5 17.2 12.8 6.4 440 23.1 11.7 440 19.7
460 19.3 14.3 7.2 460 25.9 13.1 460 22.1
480 21.5 15.9 8 480 14.7 480 24.8
500 23.9 17.7 8.9 500 16.3
9
AmnonDrip 23mm
AmnonDrip 23, 1.1 l/h, W.T 1.00mm, ID 20.8 AmnonDrip 23 1.6l/h, W.T 1.00mm, ID 20.8 AmnonDrip 23 2.2l/h, W.T 1.00mm, ID 20.8 AmnonDrip 23 3.8l/h, W.T 1.00mm, ID 20.8
20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 20 30 40 50 60 70 100 20 30 40 50 60 70 100
length(m) length(m) length(m)
40 0.2 0.1 40 0.2 0.1 0.1 40 0.4 0.2 0.1 0.1 20 0.2 0.1
60 0.4 0.2 0.1 0.1 60 0.6 0.3 0.2 0.1 0.1 0.1 60 0.9 0.4 0.3 0.2 0.1 0.1 40 0.7 0.4 0.2 0.1 0.1 0.1
80 0.7 0.3 0.2 0.1 0.1 0.1 80 1.2 0.5 0.3 0.2 0.1 0.1 0.1 80 1.8 0.9 0.5 0.3 0.2 0.2 0.1 60 2 1 0.6 0.4 0.3 0.2 0.1
100 1.2 0.6 0.3 0.2 0.1 0.1 0.1 100 2 0.9 0.5 0.4 0.3 0.2 0.1 100 3.2 1.5 0.9 0.6 0.4 0.3 0.2 80 4.2 2 1.1 0.7 0.5 0.4 0.2
120 1.8 0.9 0.5 0.3 0.2 0.2 0.1 120 3.1 1.5 0.8 0.6 0.4 0.3 0.2 120 5 2.4 1.4 0.9 0.6 0.5 0.3 100 7.4 3.5 2 1.3 0.9 0.7 0.4
140 2.7 1.2 0.7 0.5 0.3 0.2 0.1 140 4.6 2.1 1.2 0.8 0.6 0.4 0.2 140 7.4 3.5 2 1.3 1 0.7 0.4 120 11.9 5.6 3.2 2.1 1.5 1.2 0.6
160 3.7 1.7 1 0.7 0.5 0.3 0.2 160 6.4 3 1.7 1.1 0.8 0.6 0.3 160 10.5 4.9 2.9 1.9 1.3 1 0.5 140 17.8 8.4 4.9 3.2 2.3 1.7 0.9
180 4.9 2.3 1.3 0.9 0.6 0.5 0.2 180 8.7 4 2.3 1.5 1.1 0.8 0.4 180 14.2 6.6 3.9 2.5 1.8 1.4 0.7 160 25.5 11.9 7 4.6 3.3 2.5 1.3
200 6.4 3 1.7 1.1 0.8 0.6 0.3 200 11.3 5.3 3.1 2 1.4 1.1 0.6 200 18.7 8.8 5.1 3.4 2.4 1.8 0.9 180 16.3 9.5 6.3 4.5 3.4 1.8
220 8.1 3.8 2.2 1.4 1 0.8 0.4 220 14.4 6.7 3.9 2.6 1.8 1.4 0.7 220 24 11.2 6.5 4.3 3.1 2.3 1.2 200 21.7 12.6 8.3 6 4.5 2.3
240 10.1 4.7 2.7 1.8 1.3 1 0.5 240 18.1 8.4 4.9 3.2 2.3 1.7 0.9 240 14.1 8.2 5.4 3.9 2.9 1.5 220 16.4 10.8 7.7 5.8 3
260 12.3 5.7 3.3 2.2 1.6 1.2 0.6 260 22.2 10.4 6 4 2.8 2.1 1.1 260 17.5 10.2 6.7 4.8 3.6 1.9 240 20.7 13.7 9.8 7.3 3.8
280 14.9 7 4 2.7 1.9 1.4 0.7 280 12.6 7.3 4.8 3.4 2.6 1.3 280 21.3 12.4 8.2 5.8 4.4 2.3 260 17 12.1 9.1 4.7
300 17.8 8.3 4.8 3.2 2.3 1.7 0.9 300 15.1 8.8 5.8 4.1 3.1 1.6 300 25.6 14.9 9.8 7 5.3 2.7 280 20.8 14.8 11.2 5.8
320 21 9.8 5.7 3.7 2.7 2 1 320 17.9 10.5 6.9 4.9 3.7 1.9 320 17.8 11.7 8.4 6.3 3.2 300 25.1 18 13.5 7
340 24.5 11.5 6.7 4.4 3.1 2.3 1.2 340 21 12.3 8.1 5.8 4.3 2.2 340 21 13.8 9.8 7.4 3.8
360 13.3 7.8 5.1 3.6 2.7 1.4 360 24.4 14.3 9.4 6.7 5 2.6 360 24.5 16.1 11.4 8.6 4.5
380 15.3 8.9 5.9 4.2 3.1 1.6 380 16.5 10.9 7.7 5.8 3 380 18.6 13.3 9.9 5.2
400 17.5 10.2 6.7 4.8 3.6 1.8 400 18.9 12.5 8.9 6.7 3.4 400 21.4 15.2 11.5 5.9
420 19.8 11.6 7.6 5.4 4.1 2.1 420 21.6 14.2 10.1 7.6 3.9 420 24.4 17.4 13.1 6.8
440 22.4 13.1 8.6 6.1 4.6 2.4 440 24.5 16.1 11.5 8.6 4.4 440 19.8 14.8 7.7
460 25.22 14.7 9.7 6.9 5.2 2.7 460 18.1 12.9 9.7 5 460 22.3 16.8 8.7
480 16.5 10.8 7.7 5.8 3 480 20.3 14.5 10.9 5.6 480 25 18.8 9.7
500 18.4 12.1 8.6 6.5 3.3 500 22.7 16.2 12.2 6.3 500 21.1 10.9
10
TopDrip HD PC & PC AS
Innovative, cost effective, heavy
duty pressure-compensating
(PC) and anti-syphon (PC AS)
thick-walled dripline models
based on the cascade labyrinth
APPLICATIONS TopDrip PC TopDrip PC AS

• Row crops and vegetables
• For orchards and other multi-seasonal applications
• Subsurface drip irrigation (SDI)
1.0, 1.6 l/h 1.0, 1.6 l/h
• Variable topography
• Irrigation of long rows with high uniformity
• Accurate pressure-compensating dripper
• Low CV: 3.0%
• Cascade labyrinth incorporated for maximal clog
resistance
• Protection from root intrusion 3 PARTS-UPPER VIEW 3 PARTS-BOTTOM VIEW
• Unique double self-cleaning mechanism Shallow profile reduces head losses Multi-channel: three-
Raised water inlet reduces clogging dimensional water inlets and
• Large water passages for optimal durability at low eleven independent entrances
flow rates
• Multiple channel water inlet for operation under
heavy dirt load
• Close dripper spacing creates a continuous wetted strip
Weir design prevents root

intrusion and sand suction
TECHNICAL DATA
• Flow rate: 1.0, 1.6 l/h
• Pressure regulating range: 0.4-3 bar
• Operating pressure: 0.4-3 bar, according to wall
Cascade labyrinth, wide

thickness water passages and
strong self-cleaning
• Wall thickness: 0.9-1.2 mm operation
• Recommended filtration: 130 micron (120 mesh)
11
TECHNICAL DATA
Nominal Wall Maximum Connector
OD ID
diameter thickness Pressure KD type
(mm) (mm)
(mm) (mm) (mil) (bar) Dentados
16 0.90 35 15.70 13.9 3.0 0.575 ●
16 1.00 39 15.90 13.9 3.0 0.575 ●
16 1.15 45 16.20 13.9 3.0 0.575 ●
17 0.90 35 16.20 14.4 3.0 0.48 ●
17 1.00 39 16.40 14.4 3.0 0.48 ●
17 1.20 47 17.00 14.4 3.0 0.48 ●
20 1.00 39 19.70 17.70 3.0 0.35 ●
20 1.20 47 20.10 17.70 3.0 0.35 ●
TOPDRIP PACKAGING AND SHIPPING
Carton spools
16 0.90 400 320 640 720
16 1.00 400 320 640 720
17 0.63 600 320 640 720
17 0.90 400 320 640 720
17 1.00 400 320 640 720
20 0.90 300 320 640 720
20 1.00 300 320 640 720
Coils
16 0.90 500 150 320 360
16 1.00 500 150 320 360
16 1.15 500 150 320 360
17 0.90 500 150 320 360
17 1.00 500 150 320 360
17 1.20 500 150 320 360

20 1.00 300 150 345 365
20 1.20 300 150 345 365
12
TopDrip 16, 1.0l/h, W.T 0.9-1.15mm, ID 13.9 TopDrip 16, 1.6l/h, W.T 0.9-1.15mm, ID 13.9 TopDrip 17, 1.0l/h, W.T 0.9-1.2mm, ID 14.4
Dripper spacing Dripper spacing Dripper spacing
Lateral Lateral Lateral
0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1 0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1 0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1
length (m) length (m) length (m
20 0.1 0.1 20 0.3 0.2 20 0.1
40 1 0.5 0.2 0.1 0.1 40 2.4 1.1 0.4 0.2 0.1 40 0.7 0.4 0.1 0.1
60 3.2 1.5 0.6 0.3 0.2 0.1 0.1 0.1 0.1 60 7.9 3.8 1.4 0.7 0.4 0.3 60 2.5 1.2 0.5 0.2 0.1 0.1 0.1 0.1
80 7.4 3.5 1.3 0.7 0.4 0.3 0.2 0.1 0.1 0.1 80 18.5 8.8 3.2 1.6 1 0.7 0.4 0.4 0.3 0.2 80 5.7 2.8 1 0.5 0.3 0.2 0.1 0.1 0.1 0.1
100 14.3 6.8 2.5 1.3 0.8 0.5 0.3 0.3 0.2 0.2 100 16.9 6.2 3.1 1.9 1.2 0.8 0.7 0.5 0.4 100 11.1 5.3 2 1 0.6 0.4 0.3 0.2 0.2 0.1
120 24.4 11.6 4.3 2.2 1.3 0.9 0.5 0.5 0.4 0.3 120 28.9 10.5 5.3 3.2 2.1 1.3 1.1 0.9 0.7 120 18.9 9.1 3.4 1.7 1.1 0.7 0.4 0.4 0.3 0.2
140 18.3 6.7 3.4 2 1.4 0.8 0.7 0.6 0.5 140 16.5 8.3 5 3.3 2 1.8 1.4 1.1 140 29.8 14.3 5.3 2.7 1.6 1.1 0.7 0.6 0.5 0.4
160 27 9.9 5 3 2 1.2 1.1 0.8 0.7 160 24.4 12.2 7.3 4.9 3 2.6 2 1.6 160 21.1 7.9 4 2.4 1.6 1 0.9 0.7 0.6
180 13.9 7 4.2 2.8 1.7 1.5 1.2 0.9 180 17.3 10.3 6.8 4.2 3.6 2.8 2.3 180 29.9 11.1 5.6 3.4 2.3 1.4 1.2 1 0.8
200 18.9 9.5 5.7 3.8 2.3 2 1.6 1.3 200 23.5 14 9.3 5.7 4.9 3.8 3.1 200 15.1 7.7 4.6 3.1 1.9 1.7 1.3 1.1
220 25 12.6 7.5 5 3.1 2.7 2.1 1.7 220 18.4 12.2 7.5 6.5 5.1 4 220 19.9 10.1 6.1 4.1 2.5 2.2 1.7 1.4
240 16.2 9.7 6.4 3.9 3.4 2.7 2.1 240 23.7 15.7 9.6 8.4 6.5 5.2 240 25.6 13 7.9 5.3 3.3 2.8 2.2 1.8
260 20.5 12.2 8.1 5 4.3 3.4 2.7 260 30 19.8 12.1 10.5 8.2 6.5 260 16.5 9.9 6.6 4.1 3.6 2.8 2.2
280 25.4 15.2 10.1 6.2 5.4 4.2 3.3 280 24.6 15 13 10.1 8.1 280 20.4 12.3 8.2 5.1 4.4 3.5 2.8
300 18.5 12.3 7.5 6.5 5.1 4.1 300 18.3 15.9 12.4 9.9 300 25 15 10 6.2 5.4 4.2 3.4
320 22.3 14.8 9.1 7.9 6.1 4.9 320 22.1 19.2 14.9 11.9 320 18.1 12.1 7.5 6.5 5.1 4.1
340 26.6 17.6 10.8 9.4 7.3 5.8 340 26.3 22.8 17.7 14.2 340 21.6 14.4 8.9 7.7 6 4.9
360 20.8 12.7 11.1 8.6 6.9 360 26.9 20.9 16.7 360 25.5 17 10.5 9.1 7.1 5.7
380 24.4 14.9 12.9 10.1 8 380 24.5 19.5 380 19.9 12.2 10.7 8.3 6.7
400 28.3 17.3 15 11.7 9.3 400 28.4 22.6 400 23.1 14.2 12.4 9.7 7.7
420 19.9 17.3 13.4 10.7 420 26.1 420 26.5 16.3 14.2 11.1 8.9
440 22.8 19.8 15.4 12.3 440 440 18.7 16.3 12.7 10.2
460 25.9 22.5 17.5 14 460 460 21.3 18.5 14.4 11.6
480 25.4 19.8 15.8 480 480 24 20.9 16.3 13.1
500 22.2 17.8 500 500 27 23.5 18.4 14.7
Kd = 0.575, Slope 0 %, TOP 16, 1.0l/h, W.T. 0.9-1.15, Inlet TOP 16, 1.6l/h, W.T. 0.9-1.15 Headloss curves, Diam: 16/13.95, Headloss curves, Diam: 17/14.4, Inlet prs: 30, TOP 17, 1.0l/h,
prs: 30 Inlet prs: 30, Slope 0 %, Kd = 0.575 W.T. 0.9-1.2, Slope 0 %, Kd = 0.48
TopDrip 17, 1.6l/h, W.T 0.9-1.2mm, ID 14.4 TopDrip 20, 1.0l/h, W.T 0.9-1.2mm, ID 17.7 TopDrip 20, 1.6l/h, W.T 0.9-1.2mm, ID 17.7
Dripper spacing Dripper spacing Dripper spacing
length(m 0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1
length(m) 0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1 length(m) 0.15 0.2 0.3 0.4 0.5 0.6 0.75 0.8 0.9 1
20 0.2 0.1 20 20 0.1

40 1.9 0.9 0.3 0.2 0.1 0.1 40 0.3 0.1 40 0.6 0.3 0.1 0.1
60 6.1 3 1.1 0.6 0.3 0.2 0.1 0.1 0.1 0.1 60 0.8 0.4 0.2 0.1 0.1 60 2.1 1.0 0.4 0.2 0.1 0.1 0.1 0.1
80 14.3 6.9 2.6 1.3 0.8 0.5 0.3 0.3 0.2 0.2 80 1.9 0.9 0.4 0.2 0.1 0.1 80 4.8 2.3 0.9 0.5 0.3 0.2 0.1 0.1 0.1 0.1
100 27.6 13.2 4.9 2.5 1.5 1 0.6 0.6 0.4 0.3 100 3.7 1.8 0.7 0.4 0.2 0.1 0.1 0.1 0.1 0.1 100 9.3 4.5 1.7 0.9 0.5 0.4 0.2 0.2 0.2 0.1
120 22.6 8.4 4.3 2.6 1.7 1.1 0.9 0.7 0.6 120 6.4 3.1 1.2 0.6 0.4 0.3 0.2 0.1 0.1 0.1 120 15.8 7.7 2.9 1.5 0.9 0.6 0.4 0.3 0.3 0.2
140 13.1 6.7 4 2.7 1.7 1.5 1.1 0.9 140 10 4.8 1.8 0.9 0.6 0.4 0.2 0.2 0.2 0.1 140 25.0 12.0 4.5 2.3 1.4 1.0 0.6 0.5 0.4 0.3
160 19.4 9.8 5.9 4 2.5 2.1 1.7 1.3 160 14.8 7.2 2.7 1.4 0.9 0.6 0.4 0.3 0.2 0.2 160 17.8 6.7 3.4 2.1 1.4 0.9 0.8 0.6 0.5
180 27.3 13.9 8.3 5.6 3.4 3 2.4 1.9 180 20.9 10.1 3.8 2 1.2 0.8 0.5 0.4 0.3 0.3 180 25.1 9.4 4.8 2.9 2.0 1.2 1.1 0.8 0.7
200 18.8 11.3 7.6 4.7 4.1 3.2 2.6 200 28.6 13.8 5.2 2.7 1.6 1.1 0.7 0.6 0.5 0.4 200 12.8 6.5 4.0 2.7 1.7 1.5 1.1 0.9
220 24.9 14.9 10 6.2 5.4 4.2 3.4 220 18.2 6.8 3.5 2.1 1.4 0.9 0.8 0.6 0.5 220 16.9 8.6 5.2 3.5 2.2 1.9 1.5 1.2
240 19.2 12.8 7.9 6.9 5.4 4.3 240 23.5 8.8 4.5 2.8 1.9 1.2 1 0.8 0.6 240 21.7 11.1 6.7 4.5 2.8 2.4 1.9 1.5
260 24.2 16.2 10 8.7 6.8 5.4 260 29.8 11.1 5.7 3.5 2.3 1.5 1.3 1 0.8 260 27.4 14.0 8.5 5.7 3.5 3.1 2.4 1.9
280 20 12.3 10.7 8.4 6.7 280 13.8 7.1 4.3 2.9 1.8 1.6 1.2 1 280 17.4 10.5 7.0 4.4 3.8 3.0 2.4
300 24.4 15 13.1 10.2 8.2 300 16.9 8.7 5.3 3.5 2.2 1.9 1.5 1.2 300 21.3 12.8 8.6 5.3 4.7 3.6 2.9
320 29.5 18.1 15.8 12.3 9.9 320 20.4 10.5 6.3 4.3 2.6 2.3 1.8 1.5 320 25.6 15.5 10.4 6.4 5.6 4.4 3.5
340 21.6 18.8 14.7 11.7 340 24.4 12.5 7.6 5.1 3.2 2.7 2.2 1.7 340 18.4 12.4 7.7 6.7 5.2 4.2
360 25.5 22.2 17.3 13.8 360 28.8 14.7 8.9 6 3.7 3.2 2.5 2 360 21.8 14.6 9.0 7.9 6.2 4.9
380 25.9 20.2 16.2 380 17.2 10.4 7 4.3 3.8 3 2.4 380 25.5 17.0 10.5 9.2 7.2 5.8
400 23.4 18.8 400 20 12.1 8.1 5 4.4 3.4 2.8 400 19.8 12.2 10.7 8.3 6.7
420 26.9 21.6 420 23 13.9 9.3 5.8 5.1 4 3.2 420 22.7 14.1 12.3 9.6 7.7
440 24.7 440 26.4 15.9 10.7 6.6 5.8 4.5 3.6 440 26.0 16.1 14.0 10.9 8.8
460 28 460 18.1 12.1 7.5 6.6 5.1 4.1 460 18.3 15.9 12.5 10.0
480 480 20.5 13.7 8.5 7.4 5.8 4.7 480 20.7 18.0 14.1 11.3
500 500 23.1 15.5 9.6 8.4 6.5 5.2 500 23.3 20.3 15.8 12.7
Headloss curves, Diam: 17/14.4, Inlet prs: 30, TOP 17, Headloss curves, Diam: 20/17.7, Inlet prs: 30, TOP Headloss curves, Diam: 20/17.7, Inlet prs: 30, TOP
1.6l/h, W.T. 0.9-1.2, Slope 0 %, Kd = 0.48 20, 1.0l/h, W.T. 0.9-1.2, Slope 0 %, Kd = 0.35 20, 1.6l/h, W.T. 0.9-1.2, Slope 0 %, Kd = 0.35
13
THICK-WALLED PRESSURE COMPENSATING DRIPPERS
NaanPC
State-of-the-art cylindrical PC
(Pressure-Compensating) dripper
ensures highest durability and
excellent performance
APPLICATIONS 16 mm 20 mm
• Ideal solution for irrigation in topographically
challenging terrain and where long laterals are
required
1.1 l/h 0.95 l/h
• For accurate irrigation of orchards, open field
crops and greenhouses

1.6 l/h 1.6 l/h
• 16 mm and 20 mm polyethylene dripline with
integrated pressure-compensating drippers
• Double water inlets and outlets per dripper
• New formulated silicone diaphragm ensures reliable
2.2 l/h 2.2 l/h
and accurate performance with diverse water
qualities, chemicals and fertilizers
• Individual double filter and flushing mechanism for
maximal clog resistance and self-cleaning
3.5 l/h 3.8 l/h
vs. pressure NaanPC
Naan PC dripper dripper structure
structure
Strong
16 - 3.5
cylinder
structure Symmetrical Two
outlets
g Recommended working range

Double filter inlet

Cascade labyrinth
16 - 2.2
16 - 1.6
16 - 1.1
10 1415 20 25 30 35 40
THICK & MEDIUM WALLED PC CYLINDRICAL DRIPLINE
NaanPC
TECHNICAL DATA NAANPC PACKAGING AND SHIPPING
Nominal Pressure
Wall Max Coils
Product OD ID flow regulating Connector Nominal Wall Standard Coils Coils
thickness pressure KD per 40
name (mm) (mm) rate range Type diameter thickness coil length per 20 ft. per 40 ft.
(mm) (bar) ft. HC
(l/h) (bar) (mm) (mm) (m) container container
container
0.90 15.7 1.2 0.5-3.0 3.0 0.7
NaanPC
1.00 15.9 13.9 1.2 0.5-3.5 3.5 0.7 16 0.90 400 165 350 395
16/1.1
1.15 16.2 1.1 0.5-3.5 3.5 0.7
16 1.00 400 165 350 395
0.90 15.7 1.6 0.5-3.0 3.0 0.7
NaanPC 16 1.15 400 165 350 395
1.00 15.9 13.9 1.6 0.5-3.5 3.5 0.7
16/1.6
1.15 16.2 1.6 0.5-3.5 3.5 0.7 20 1.00 300 125 270 300
Barb 16
0.90 15.7 2.3 0.5-3.0 3.0 0.7
NaanPC 20 1.20 300 134 290 320
1.00 15.9 13.9 2.3 0.5-3.5 3.5 0.7
16/2.2
1.15 16.2 2.2 0.5-3.5 3.5 0.7
0.90 15.7 3.5 0.7-3.0 3.0 0.7
NaanPC
1.00 15.9 13.9 3.5 0.7-3.5 3.5 0.7
16/3.5
1.15 16.2 3.5 0.7-3.5 3.5 0.7
NaanPC 1.00 19.7 0.95 0.7-3.0 3.0 0.9
17.7
20/0.95 1.20 20.1 0.95 0.7-3.5 3.5 0.9
NaanPC 1.00 19.7 1.6 0.5-3.0 3.0 0.9
17.7
20/1.6 1.20 20.1 1.6 0.5-3.5 3.5 0.9
Barb 20
NaanPC 1.00 19.7 2.3 0.5-3.0 3.0 0.9
17.7
20/2.2 1.20 20.1 2.2 0.5-3.5 3.5 0.9
NaanPC 1.00 19.7 4.0 0.5-3.0 3.0 0.9
17.7
20/3.8 1.20 20.1 3.8 0.5-3.5 3.5 0.9
15
NaanPC 16mm
NaanPC 16/1.1 1.2 l/h, W.T 0.9 -1.00mm ID 13.9mm NaanPC 16/1.1 1.1 l/h, W.T 1.15 mm ID 13.9mm NaanPC 16/1.6 1.6 l/h , W.T 0.9 -1.15 mm ID 13.9mm
Dripper spacing (cm) Dripper spacing (cm) Dripper spacing (cm)
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
20 0.1 20 0.1 20 0.2 0.1
40 0.7 0.3 0.1 0.1 0.1 40 0.6 0.2 0.1 0.1 40 1.2 0.5 0.2 0.1 0.1 0.1
60 2.3 0.9 0.4 0.3 0.2 0.1 0.1 60 1.9 0.7 0.4 0.2 0.2 0.1 0.1 60 4.1 1.5 0.8 0.5 0.3 0.2 0.1
80 5.4 2 1 0.6 0.4 0.3 0.1 80 4.6 1.7 0.9 0.5 0.4 0.3 0.1 80 9.7 3.5 1.8 1.1 0.7 0.5 0.3
100 10.6 3.9 2 1.2 0.8 0.6 0.3 100 8.9 3.3 1.6 1 0.7 0.5 0.2 100 18.8 6.8 3.4 2 1.4 1 0.5
120 18.3 6.7 3.3 2 1.4 1 0.5 120 15.4 5.6 2.8 1.7 1.1 0.8 0.4 120 11.7 5.8 3.5 2.4 1.7 0.8
140 10.5 5.2 3.1 2.1 1.5 0.7 140 24.4 8.8 4.4 2.7 1.8 1.3 0.6 140 18.4 9.2 5.5 3.7 2.6 1.3
160 15.6 7.8 4.7 3.1 2.2 1.1 160 13.1 6.6 3.9 2.6 1.9 0.9 160 13.6 8.1 5.4 3.9 1.8
180 22 11 6.6 4.4 3.1 1.5 180 18.5 9.3 5.6 3.7 2.7 1.3 180 19.3 11.5 7.7 5.5 2.6
200 15 8.9 6 4.2 2 200 25.4 12.7 7.6 5.1 3.6 1.7 200 15.6 10.4 7.4 3.5
220 19.9 11.8 7.9 5.6 2.7 220 16.8 10 6.7 4.8 2.2 220 20.7 13.7 9.8 4.6
240 25.7 15.3 10.2 7.2 3.4 240 21.7 12.9 8.6 6.1 2.9 240 17.8 12.5 5.9
260 19.3 12.8 9.1 4.3 260 16.3 10.9 7.7 3.6 260 22.4 15.9 7.4
280 24 15.9 11.4 5.3 280 20.3 13.5 9.6 4.5 280 19.8 9.2
300 19.6 13.8 6.5 300 24.9 16.5 11.7 5.5 300 24.1 11.2
320 23.6 16.8 7.8 320 19.9 14.2 6.6 320 13.5
340 19.9 9.3 340 23.7 16.9 7.9 340 16.1
360 23.6 11 360 20 9.3 360 19
380 12.9 380 23.3 10.9 380 22.2
400 14.9 400 12.6 400 25.8
420 17.2 420 14.5
440 19.6 440 16.6
460 22.3 460 18.9
480 25.3 480 21.4
NaanPC 16/2.2 2.3 l/h, W.T. 0.9-1.00 mm ID 13.9mm NaanPC 16/2.2 2.2 l/h, W.T 1.15 mm ID 13.9mm NaanPC 16/3.5 3.5 l/h, W.T 0.9-1.15 mm ID 13.9mm
length(m) 20 30 40 50 60 70 80 90 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
20 0.3 0.1 0.1 20 0.3 0.1 0.1 20 0.8 0.3 0.1 0.1 0.1
40 2.5 0.9 0.5 0.3 0.2 0.1 0.1 0.1 0.1 40 2.3 0.9 0.4 0.3 0.2 0.1 0.1 40 5.8 2.1 1.1 0.6 0.4 0.3 0.2
60 8.4 3.1 1.6 0.9 0.6 0.5 0.3 0.3 0.2 60 7.7 2.8 1.4 0.9 0.6 0.4 0.2 60 19.5 7.1 3.6 2.1 1.4 1 0.5
80 19.9 7.2 3.6 2.2 1.5 1 0.8 0.6 0.5 80 18.2 6.6 3.3 2 1.3 1 0.5 80 16.4 8.2 4.9 3.3 2.3 1.1
100 14 6.9 4.1 2.8 2 1.5 1.2 1 100 12.8 6.4 3.8 2.5 1.8 0.9 100 15.8 9.3 6.2 4.4 2.1
120 24 11.9 7.1 4.7 3.4 2.5 2 1.6 120 22 10.9 6.5 4.4 3.1 1.5 120 15.9 10.7 7.5 3.6
140 18.7 11.1 7.4 5.2 4 3.1 2.5 140 17.1 10.2 6.8 4.8 2.3 140 25.1 16.7 11.7 5.5
160 16.4 10.9 7.7 5.8 4.5 3.7 160 25.4 15.1 10 7.1 3.4 160 24.5 17.4 8.1
180 23.2 15.5 11 8.1 6.3 5.1 180 21.3 14.2 10.1 4.7 180 24.6 11.4
200 21 14.8 11 8.6 6.9 200 19.2 13.6 6.4 200 15.5
220 19.6 14.6 11.4 9.1 220 25.3 18 8.4 220 20.4
240 25.2 18.7 14.6 11.8 240 23.1 10.8
260 23.7 18.4 14.8 260 13.6
280 22.9 18.4 280 16.9
300 22.4 300 20.6
320 24.8
16
NaanPC 20mm
NaanPC 20/0.95 0.95 l/h, W.T 1.00-1.20mm ID 17.7mm NaanPC 20/1.6 1.6 l/h, W.T 1.00-1.20mm ID 17.7mm NaanPC 20/2.2 2.2 l/h, W.T 1.00-1.20mm ID 17.7mm
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
40 0.2 0.1 40 0.6 0.2 0.1 0.1 40 1.0 0.4 0.2 0.1 0.1 0.1
60 0.7 0.2 0.1 0.1 60 1.8 0.7 0.3 0.2 0.1 0.1 60 3.3 1.2 0.6 0.3 0.2 0.2 0.1
80 1.5 0.6 0.3 0.2 0.1 0.1 80 4.1 1.5 0.7 0.4 0.3 0.2 0.1 80 7.6 2.7 1.3 0.8 0.5 0.4 0.2
100 2.9 1.1 0.5 0.3 0.2 0.1 0.1 100 7.9 2.8 1.4 0.8 0.5 0.4 0.2 100 14.5 5.2 2.5 1.5 1.0 0.7 0.3
120 5 1.8 0.9 0.5 0.3 0.2 0.1 120 13.4 4.8 2.3 1.4 0.9 0.6 0.3 120 24.6 8.8 4.3 2.5 1.7 1.2 0.5
140 7.8 2.8 1.4 0.8 0.5 0.4 0.2 140 21 7.4 3.7 2.1 1.4 1.0 0.5 140 13.6 6.7 3.9 2.6 1.8 0.8
160 11.5 4.1 2 1.2 0.8 0.5 0.3 160 11 5.4 3.1 2.1 1.5 0.7 160 20.1 9.8 5.7 3.8 2.6 1.2
180 16.2 5.7 2.8 1.7 1.1 0.8 0.4 180 15.4 7.5 4.4 2.9 2.0 0.9 180 13.8 8.1 5.3 3.7 1.7
200 22 7.8 3.8 2.2 1.5 1 0.5 200 20.9 10.2 6.0 3.9 2.7 1.3 200 18.7 10.9 7.2 5.0 2.3
220 10.3 5 2.9 1.9 1.4 0.6 220 13.5 7.9 5.2 3.6 1.6 220 24.6 14.4 9.4 6.6 3.0
240 13.2 6.5 3.8 2.5 1.7 0.8 240 17.3 10.1 6.6 4.6 2.1 240 18.5 12.1 8.4 3.8
260 16.6 8.1 4.8 3.1 2.2 1 260 21.8 12.8 8.3 5.9 2.7 260 23.3 15.2 10.7 4.8
280 20.3 10.1 5.9 3.9 2.7 1.2 280 15.8 10.3 7.3 3.3 280 18.8 13.2 6.0
300 25.1 12.3 7.2 4.7 3.3 1.5 300 19.3 12.6 8.8 4.0 300 23.0 16.1 7.3
320 14.9 8.7 5.7 4 1.8 320 23.2 15.2 10.7 4.8 320 19.4 8.7
340 17.7 10.3 6.8 4.7 2.2 340 18 12.6 5.7 340 23.0 10.4
360 20.9 12.2 7.9 5.6 2.5 360 21.2 14.9 6.7 360 12.3
380 24.5 14.3 9.3 6.5 3 380 24.9 17.4 7.9 380 14.3
400 16.5 10.8 7.6 3.4 400 20.2 9.1 400 16.6
420 19 12.4 8.7 3.9 420 23.3 10.5 420 19.1
440 21.8 14.2 10 4.5 440 12 440 21.8
460 24.7 16.1 11.3 5.1 460 13.6 460 24.7
480 18.2 12.8 5.8 480 15.4
500 20.5 14.4 6.5 500 17.3
NaanPC 20/3.8 3.8 l/h, W.T 1.00-1.20mm ID 17.7mm

Dripper spacing (cm)
Lateral
length(m) 20 30 40 50 60 70 100
40 2.9 1.0 0.5 0.3 0.2 0.1 0.1
60 9.3 3.4 1.7 1.0 0.6 0.4 0.2
80 21.5 7.6 3.7 2.2 1.4 1.0 0.5
100 14.6 7.1 4.2 2.7 1.9 0.9
120 24.7 12.0 7.0 4.6 3.2 1.5
140 18.8 11.0 7.2 5.0 2.3

160 16.1 10.5 7.4 3.4
180 22.6 14.8 10.4 4.7
200 20.0 14.0 6.4
220 18.5 8.4
240 23.6 10.7
260 13.5
280 16.6
300 20.3
320 24.4
17
THIN TO MEDIUM-WALLED PC FLAT DRIPLINE
TopDrip
Innovative, cost effective,
pressure-compensating (PC)
and anti-syphon (PC AS) thin to
medium-walled dripline models
based on the cascade labyrinth
TopDrip PC TopDrip PC AS
1.0, 1.6 l/h 1.0, 1.6 l/h
APPLICATIONS TECHNICAL DATA
• Row crops like Sugercane, vegetables etc. Max.
Nominal Wall thickness ID OD Conectors
• Subsurface drip irrigation (SDI) diameter mil mm (mm) (mm)
Pressure KD
(bar) Tape
• Variable topography
16 13 0.33 16.2 16.86 1.4 0.4
• Irrigation of long rows with high uniformity ●
15 0.38 16.2 16.96 1.8 0.4 ●
18 0.45 15.8 16.70 2.0 0.4 ●
25 0.63 15.6 16.86 2.5 0.4 ●
• Accurate pressure-compensating dripper 22 13 0.33 22.2 22.86 1.2 0.3 ●
• Low CV: 3.0% 15 0.38 22.2 22.96 1.4 0.3 ●
18 0.45 22.2 23.10 1.7 0.3 ●
• Cascade labyrinth incorporated for maximal clog 25 0.63 22.2 23.46 2.0 0.3 ●
resistance
• Protection from root intrusion SPECIAL MODEL
• Unique double self-cleaning mechanism • PC AS: Anti-syphon design prevents suction at
• Allows longer laterals with EU of 95% draining stage
• Large water passages for optimal durability at low • Recommended for subsurface drip irrigation
flow rates TECHNICAL DATA
• Multiple channel water inlet for operation under
• Flow rate: 1.0, 1.6 l/h
heavy dirt load
• Pressure regulating range: 0.4-2.5 bar
• Close dripper spacing creates a continuous wetted strip
• Operating pressure: 0.4-2.5 bar, according to wall
TOPDRIP PACKAGING AND SHIPPING thickness
Carton spools • Wall thickness: 13-25 mil, 0.33-0.63 mm
• Recommended filtration: 130 micron (120 mesh)
Nominal Wall Standard Coils Coils Coils Coils per
diameter thickness coil* length per per 20 ft. per 40 ft. 40 ft. HC
(mm) (mil) (m) pallet container container container
16mm 13 1250 16 320 640 720

16mm 15 1250 16 320 640 720
16mm 18 1150 16 320 640 720
16mm 25 600 16 320 640 720
22mm 13 550 16 320 640 720
22mm 15 500 16 320 640 720
22mm 18 450 16 320 640 720
22mm 25 375 16 320 640 720
18
TopDrip 16 mm
TopDrip 16, 1.0 l/h, W.T13-15 mil, ID 16.2 TopDrip 16, 1.0 l/h, W.T 18mil, ID 15.8 TopDrip 16, 1.0 l/h, W.T 25mil, ID 15.6

Lateral Lateral 20 30 40 50 60 70 100 Lateral
length(m) 20 30 40 50 60 70 100 length(m) length(m) 20 30 40 50 60 70 100
20 0.1 20 0.1 20 0.1
40 0.3 0.1 0.1 40 0.3 0.1 0.1 40 0.3 0.1 0.1
60 0.9 0.4 0.2 0.1 0.1 0.1 60 1 0.4 0.2 0.1 0.1 0.1 60 1.0 0.4 0.2 0.1 0.1 0.1
80 2.0 0.8 0.4 0.3 0.2 0.1 0.1 80 2.1 0.9 0.5 0.3 0.2 0.1 0.1 80 2.2 0.9 0.5 0.3 0.2 0.2 0.1
100 3.5 1.5 0.8 0.5 0.3 0.2 0.1 100 3.7 1.6 0.8 0.5 0.4 0.3 0.1 100 3.9 1.6 0.9 0.5 0.4 0.3 0.1
120 5.8 2.4 1.3 0.8 0.5 0.4 0.2 120 6.1 2.5 1.4 0.8 0.6 0.4 0.2 120 6.4 2.7 1.4 0.9 0.6 0.5 0.2
140 8.7 3.6 1.9 1.2 0.8 0.6 0.3 140 9.2 3.8 2.1 1.3 0.9 0.6 0.3 140 9.6 4.0 2.2 1.4 0.9 0.7 0.3
160 12.4 5.1 2.8 1.7 1.2 0.9 0.4 160 5.5 3 1.9 1.3 0.9 0.5 160 13.8 5.8 3.1 2 1.4 1.0 0.5
180 7.0 3.8 2.4 1.6 1.2 0.6 180 7.5 4.1 2.6 1.8 1.3 0.6 180 18.9 7.9 4.3 2.7 1.9 1.4 0.7
200 9.3 5.0 3.2 2.2 1.6 0.8 200 10 5.4 3.4 2.4 1.7 0.8 200 10.5 5.8 3.6 2.5 1.8 0.9
220 12.1 6.5 4.1 2.8 2.0 1.0 220 7 4.4 3 2.2 1.1 220 13.7 7.5 4.7 3.3 2.4 1.2
240 8.3 5.2 3.6 2.6 1.3 240 8.9 5.6 3.9 2.8 1.4 240 17.3 9.5 6.0 4.1 3.0 1.5
260 10.3 6.4 4.4 3.2 1.6 260 11.1 7 4.8 3.5 1.7 260 21.5 11.8 7.4 5.2 3.8 1.9
280 12.6 7.9 5.4 4.0 1.9 280 8.6 5.9 4.3 2.1 280 14.4 9.1 6.3 4.6 2.3
300 9.5 6.6 4.8 2.3 300 10.3 7.2 5.2 2.6 300 17.4 11.0 7.7 5.6 2.8
320 11.4 7.8 5.7 2.8 320 8.5 6.3 3.1 320 20.9 13.2 9.1 6.7 3.3
340 9.2 6.7 3.3 340 10.1 7.4 3.6 340 15.6 10.8 7.9 3.9
360 10.8 7.9 3.9 360 8.6 4.2 360 18.2 12.6 9.3 4.6
380 9.1 4.5 380 10.0 4.9 380 21.1 14.7 10.7 5.3
400 10.6 5.2 400 5.7 400 16.9 12.4 6.1
420 5.9 420 6.5 420 19.3 14.2 7.0
440 6.7 440 7.4 440 22.0 16.1 8.0
460 7.6 460 8.4 460 18.3 9.0
480 8.6 480 9.4 480 20.5 10.2
500 9.6 500 10.6 500 11.4
TopDrip 16, 1.6 l/h, W.T 13-15mil, ID 16.2 TopDrip 16, 1.6 l/h, W.T 18mil, ID 15.8 TopDrip 16, 1.6 l/h, W.T 25mil, ID 15.6

length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100 length(m)
20 30 40 50 60 70 100
20 0.1 20 0.1 20 0.1

40 0.7 0.3 0.2 0.1 0.1 40 0.7 0.3 0.2 0.1 0.1 0.1 40 0.7 0.3 0.2 8 0.1 0.1
60 2.0 0.8 0.4 0.3 0.2 0.1 0.1 60 2.1 0.9 0.5 0.3 0.2 0.1 0.1 60 2.2 0.9 0.5 0.3 0.2 0.2 0.1
80 4.3 1.8 0.9 0.6 0.4 0.3 0.1 80 4.5 1.9 1.0 0.6 0.4 0.3 0.2 80 4.7 2 1.1 0.7 0.5 0.3 0.2
100 7.7 3.2 1.7 1.1 0.7 0.5 0.3 100 8.2 3.4 1.9 1.2 0.8 0.6 0.3 100 8.6 3.6 2 1.2 0.9 0.6 0.3
120 12.6 5.3 2.8 1.8 1.2 0.9 0.4 120 13.4 5.6 3.0 1.9 1.3 1.0 0.5 120 14 5.9 3.2 2 1.4 1.0 0.5
140 7.9 4.3 2.7 1.9 1.3 0.7 140 8.5 4.6 2.9 2.0 1.5 0.7 140 21.2 9 4.9 3.1 2.2 1.6 0.8
160 11.4 6.2 3.9 2.7 1.9 1.0 160 12.2 6.7 4.2 2.9 2.1 1.0 160 12.9 7.1 4.5 3.1 2.3 1.1
180 8.5 5.3 3.7 2.7 1.3 180 9.2 5.8 4.0 2.9 1.4 180 17.7 9.8 6.2 4.3 3.2 1.6
200 11.3 7.1 4.9 3.6 1.8 200 12.2 7.7 5.4 3.9 1.9 200 23.7 13.0 8.2 5.7 4.2 2.1
220 9.2 6.4 4.7 2.3 220 10.0 6.9 5.1 2.5 220 16.9 10.7 7.4 5.5 2.7
240 11.7 8.1 5.9 2.9 240 12.7 8.9 6.4 3.2 240 21.5 13.6 9.5 6.9 3.4
260 10.1 7.4 3.6 260 11.0 8.1 4.0 260 17 11.8 8.7 4.3
280 12.3 9.1 4.4 280 9.9 4.9 280 20.8 14.4 10.7 5.3
300 10.9 5.4 300 12.0 5.9 300 17.5 12.9 6.4
320 6.4 320 7.1 320 20.9 15.4 7.6
340 7.6 340 8.4 340 18.2 9
360 8.9 360 9.8 360 21.3 10.6
380 10.3 380 11.4 380 12.3

400 11.9 400 400 14.2
420 420 420 16.3
440 440 440 18.5
460 460 460
480 480 480
500 500 500
* Minimum working pressure 0.4 bar. Maximum working pressure according to wall thickness.
19
TopDrip 22 mm
TopDrip 22, 1.0l/h, W.T 13-25mil, ID 22.2 TopDrip 22,1.6l/h, W.T 13-25mil, ID 22.2
Dripper spacing (cm) Dripper spacing (cm)
Lateral 20 30 40 50 60 70 100 Lateral
length(m) 20 30 40 50 60 70 100
length(m)
40 0.1 0.1 40 0.2 0.1 0.1
60 0.3 0.1 0.1 0.1 60 0.5 0.2 0.1 0.1 0.1
80 0.6 0.3 0.2 0.1 0.1 0.1 80 1.0 0.5 0.3 0.2 0.1 0.1
100 0.9 0.4 0.2 0.2 0.1 0.1 100 1.7 0.8 0.5 0.3 0.2 0.2 0.1
120 1.4 0.7 0.4 0.2 0.2 0.1 0.1 120 2.7 1.2 0.7 0.5 0.3 0.2 0.1
140 2 0.9 0.5 0.4 0.3 0.2 0.1 140 3.8 1.8 1.0 0.7 0.5 0.4 0.2
160 2.8 1.3 0.7 0.5 0.3 0.3 0.1 160 5.3 2.5 1.4 0.9 0.7 0.5 0.3
180 3.6 1.7 1.0 0.6 0.5 0.3 0.2 180 7.1 3.3 1.9 1.3 0.9 0.7 0.3
200 4.7 2.2 1.3 0.8 0.6 0.4 0.2 200 9.2 4.3 2.5 1.6 1.2 0.9 0.4
220 5.9 2.7 1.6 1.0 0.7 0.6 0.3 220 11.7 5.5 3.2 2.1 1.5 1.1 0.6
240 7.3 3.4 2.0 1.3 0.9 0.7 0.3 240 14.6 6.8 3.9 2.6 1.9 1.4 0.7
260 8.8 4.1 2.4 1.6 1.1 0.8 0.4 260 17.9 8.3 4.8 3.2 2.3 1.7 0.9
280 10.6 4.9 2.9 1.9 1.3 1.0 0.5 280 10.1 5.8 3.8 2.7 2.1 1.1
300 12.6 5.8 3.4 2.2 1.6 1.2 0.6 300 12.0 7.0 4.6 3.3 2.4 1.3
320 14.6 6.9 4.0 2.6 1.9 1.4 0.7 320 14.2 8.3 5.4 3.9 2.9 1.5
340 8.0 4.6 3.0 2.2 1.6 0.8 340 16.6 9.7 6.3 4.5 3.4 1.7
360 9.2 5.4 3.5 2.5 1.9 1.0 360 11.2 7.4 5.2 3.9 2.0
380 10.6 6.2 4.0 2.9 2.1 1.1 380 12.9 8.5 6.1 4.5 2.3
400 12.0 7.0 4.6 3.3 2.4 1.3 400 14.8 9.7 6.9 5.2 2.7
420 13.6 7.9 5.2 3.7 2.8 1.4 420 16.8 11.0 7.9 5.9 3.0
440 15.3 8.9 5.9 4.2 3.1 1.6 440 12.5 8.9 6.7 3.4
460 10.0 6.6 4.7 3.5 1.8 460 14.0 10.0 7.5 3.9
480 11.2 7.3 5.2 3.9 2.0 480 15.7 11.2 8.4 4.3
500 12.4 8.2 5.8 4.3 2.2 500 17.5 12.5 9.4 4.8
* Minimum working pressure 0.4 bar. Maximum working pressure according to wall thickness.
20
NaanPC Light 16mm
Combines the advantages of a
PC dripper with an attractive
economical solution
1.1 l/h 2.2 l/h
1.6 l/h 3.5 l/h
TECHNICAL DATA PACKAGING AND SHIPPING

Nominal Pressure
Wall Max Coils
Product OD ID flow regulating Connector Nominal Wall Standard Coils Coils
thickness pressure KD per 40
name (mm) (mm) rate range Type diameter thickness coil length per 20 ft. per 40 ft.
(mm) (bar) ft. HC
(l/h) (bar) (mm) (mm) (m) container container
NaanPC light container
0.63 15.2 13.9 1.25 0.5-2.5 2.5 0.7
16/1.25
NaanPC light 16 0.65 500 140 260 290
0.63 15.2 13.9 1.7 0.5-2.5 2.5 0.7
16/1.7
Barb 16
NaanPC light
0.63 15.2 13.9 2.5 0.5-2.5 2.5 0.7
16/2.5
NaanPC light
0.63 15.2 13.9 3.5 0.7-2.5 2.5 0.7
16/3.5
NaanPC Light 16/1.25 1.25 l/h, W.T 0.63 mm ID 13.9mm NaanPC Light 16/1.7 1.7 l/h. W.T 0.63 mm ID 13.9mm NaanPC Light 16/2.5 2.5 l/h, W.T 0.63 mm ID 13.9mm
Lateral
length(m) 20 30 40 50 60 70 100 Lateral Lateral
length(m) 20 30 40 50 60 70 100 length(m) 20 30 40 50 60 70 100
20 0.1
20 0.2 0.1 20 0.4 0.1 0.1
40 0.7 0.3 0.1 0.1 0.1
40 1.2 0.5 0.2 0.1 0.1 0.1 40 3 1.1 0.6 0.3 0.2 0.2 0.1
60 2.5 0.9 0.5 0.3 0.2 0.1 0.1
60 4.1 1.5 0.8 0.5 0.3 0.2 0.1 60 10 3.6 1.8 1.1 0.7 0.5 0.3
80 5.9 2.2 1.1 0.7 0.5 0.3 0.2
80 9.7 3.5 1.8 1.1 0.7 0.5 0.3 80 8.5 4.2 2.5 1.7 1.2 0.6
100 11.5 4.2 2.1 1.3 0.9 0.6 0.3
100 6.8 3.4 2 1.4 1 0.5 100 8.2 4.9 3.2 2.3 1.1
120 7.2 3.6 2.2 1.5 1 0.5
120 11.7 5.8 3.5 2.4 1.7 0.8 120 8.3 5.6 3.9 1.9
140 11.3 5.7 3.4 2.3 1.6 0.8
140 9.2 5.5 3.7 2.6 1.3 140 13 8.7 6.1 2.9
160 8.4 5 3.4 2.4 1.1
160 8.1 5.4 3.9 1.8 160 12.8 9.1 4.3
180 11.9 7.1 4.8 3.4 1.6
180 11.5 7.7 5.5 2.6 180 12.9 6
200 9.7 6.5 4.6 2.2
200 10.4 7.4 3.5 200 8.1
220 12.8 8.5 6.1 2.9
220 9.8 4.6 220 10.7
240 11 7.8 3.7
240 12.5 5.9 240 13.8
260 13.9 9.9 4.6
260 7.4
280 12.3 5.7
280 9.2
300 7
300 11.2 NaanPC Light 16/3.5 3.5 l/h, W.T 0.63 mm ID 13.9mm
320 8.5
340 10.1 Dripper spacing (cm)
360 11.9 Lateral
length(m) 20 30 40 50 60 70 100
20 0.8 0.3 0.1 0.1 0.1
40 5.8 2.1 1.1 0.6 0.4 0.3 0.2
60 7.1 3.6 2.1 1.4 1 0.5
80 8.2 4.9 3.3 2.3 1.1
100 9.3 6.2 4.4 2.1
120 10.7 7.5 3.6
140 11.7 5.5
160 8.1
180 11.4
21
THICK & MEDIUM WALLED NON-PC CYLINDRICAL DRIPLINE
TifDrip
High-performance, long-lasting
cylindrical 16 mm dripper
incorporates the unique
advantages of the Cascade
labyrinth
APPLICATIONS
• All-purpose dripline
• Suitable for greenhouses, vegetables, flower fields, 4 l/h
orchards and field crops
• Compact cylindrical design with double water 2 l/h
inlets and outlets ensures high clog resistance and
improved durability
• Wide water passages facilitates constant flushing of sand
and dirt particles, contributing to efficient self-cleaning 1 l/h
• Wide range of wall thicknesses: 0.65-1.15 mm
• Low CV ensures accurate and reliable flow
• Drippers are easily visible
FLOW RATE VS. PRESSURE Flow rate vs. Pressure

7.0
Nominal flow rate (l/h)
6.5
16/1 16/2 16/4 4 l/h
6.0
P W.T 0.65mm 0.9mm 1.0mm 1.15mm 0.65mm 0.9mm 1.0mm 1.15mm 0.65mm 0.9mm 1.0mm 1.15mm 5.5
(bar) 5.0
0.5 0.82 0.82 0.82 0.72 1.61 1.50 1.50 1.43 2.72 2.58 2.58 2.58 4.5
Flow rate (l/h)
2 l/h
1.0 1.20 1.15 1.15 1.00 2.25 2.10 2.10 2.00 3.80 3.60 3.60 3.60 4.0
1.5 1.40 1.40 1.40 1.21 2.73 2.55 2.55 2.43 4.62 4.37 4.37 4.37 3.5
3.0
2.0 1.60 1.60 1.60 1.39 3.14 2.93 2.93 2.79 5.30 5.02 5.02 5.02
2.5
2.5 1.79 1.79 1.55 3.26 3.26 3.10 5.59 5.59 5.59 1 l/h
2.0
3.0 1.95 1.95 1.69 3.56 3.56 3.39 6.10 6.10 6.10 1.5
3.5 2.10 1.82 3.83 3.65 6.57 6.57 1.0
0.5
a 0.381 0.381 0.381 0.331 0.745 0.695 0.695 0.662 1.258 1.192 1.192 1.192
0
x 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.48 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Pressure
(bar)
a=Dripper flow constant x=Dripper flow exponent
22
TifDrip
TECHNICAL DATA MAXIMAL LATERAL LENGTH (M), AT 10% FLOW
Wall
VARIATION AND 1 BAR INLET PRESSURE*
Maximum Packaging and shipping
Nominal thickness
ID OD working Connectors
diameter
(mm) (mm) pressure
KD Barb Coil
Coils per Coils per Coils per Dripline Type Maximal Lateral Length (m) for Dripper Spacing (cm)
(mm) (mm) (mil) 20 ft. 40 ft. 40 ft. HC Nominal Wall
(bar) length
container container container diameter thickness 20 30 40 50 60 70 100
0.65 25 13.9 15.20 2.0 0.55 • 500 140 260 290 (mm) (mm)
•
TifDrip 16/1
0.90 35 13.9 15.70 3.0 0.55 400 165 350 395
16 0.65 58 82 102 120 138 159 196
1.00 39 13.9 15.90 3.5 0.55 • 400 165 350 395
0.90 63 88 110 130 149 167 207
16
1.15 45 13.9 16.20 3.5 0.55 • 400 165 350 395 1.00 63 88 110 130 149 167 207
1.15 69 96 120 142 163 183 231
TifDrip 16/2
0.65 48 63 77 90 101 113 138
0.90 44 61 76 90 103 115 144
16
1.00 44 61 76 90 103 115 144
1.15 45 62 78 92 106 118 149
TifDrip 16/4
0.65 36 47 56 66 74 83 101
0.90 32 43 54 64 73 82 103
16
1.00 32 43 54 64 73 82 103
1.15 32 43 54 64 73 82 103
* On flat ground
* See pressure range in the technical data table.
23
THIN & MEDIUM WALLED NON-PC FLAT DRIPLINE
TalDrip
Innovative thin/medium-walled
dripline with the most advanced
labyrinth dripper on the
market: maximum durability,
accuracy and clog resistance
Protection from sand and root
APPLICATIONS
4.0 l/h
• Ideal for sugarcane and biofuel crops, vegetables,
flowers and other row crops requiring low discharge
and close dripper spacing 1.7 l/h
• Germination and seedling establishment
• SDI (sub-surface drip irrigation) and surface 1.0 l/h
installation
0.6 l/h*
• Incorporates the Cascade labyrinth * Available in thin-walled dripline only W.T 6-15 mil
Sets new standards of clog resistance for thin-walled * Requires 100 micron filtration
driplines: Flow rate vs. Pressure
- Double flow regime for highly effective self-cleaning 7.00
7.0
4 l/h
- 3D water inlet triples handling of dirt load 6.00
6.0
- Grooved surface design ensures reliable 5.00
5.0
Flow rate (l/h)
performance, even when inlet surface area is covered 4.00

4.0
with clogging materials 3.00
3.0
1.7 l/h
• Spacial design to minimize root intrusion and sand suction 2.00
2.0
• Closer dripper spacing (from 15 cm) for successful 1 l/h
1.00
1.0 0.6 l/h
germination and improved irrigation management
0.00
0
• Very low CV ensures accurate performance 0.5
0.5 1.0
1.0 1.5
1.5 2.0
2.0 2.5
2.5 3.0 Pressure
3.0
(bar)
• Advanced quality-control technology for reliable
FLOW RATE VS. PRESSURE
performance
Nominal flow rate (l/h)
• Longer lateral and higher accuracy with excellent P 0.6 1.0 1.7 4.0
dripper exponent (bar) 6-15 mil 6-18 mil 25 mil 35 mil 6-18 mil 25 mil 35 mil 6-18 mil 25 mil 35 mil
• Filtration Recommendation: 0.5 0.47 0.75 0.77 0.80 1.27 1.25 1.30 2.55 2.70 2.90
1.0 0.60 1.00 1.05 1.10 1.60 1.70 1.80 3.50 3.70 4.00
- 1.0, 1.7 & 4.0 l/h 130 micron (120 mesh) 1.5 0.80 1.20 1.25 1.30 1.90 2.05 2.15 4.20 4.45 4.80
- 0.6 l/h 100 micron (150 mesh) 2.0 0.90 1.35 1.45 1.50 2.20 2.30 2.45 4.80 5.10 5.50
2.5 1.60 1.65 2.60 2.70 5.65 6.10
3.0 1.70 1.80 2.80 2.95 6.10 6.60
a 0.208 0.348 0.362 0.381 0.555 0.590 0.639 1.241 1.283 1.387
x 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46
a=Dripper flow constant , x=Dripper flow exponent

24
THIN & MEDIUM WALLED NON-PC FLAT DRIPLINE
TalDrip
TECHNICAL DATA
Nominal Wall Max. Connectors
OD ID KD Packaging and shipping
diameter thickness pressure type
Standard
Coils Coils per Coils per Coils per
coil
(mm) (mm) (mil) (mm) (mm) (bar) Barb Tape per 20 ft. 40 ft. 40 ft. HC
length
pallet container container container
(m)
16 0.90 35 15.70 13.9 3.0 0.11 • 500 16 320 640 720
17 0.15 6 16.30 16.0 0.7 0.1 • 3500 16 320 640 720
0.20 8 16.40 16.0 0.9 0.1 • 3000 16 320 640 720
0.25 10 16.30 15.8 1.0 0.1 • 2000 16 320 640 720
0.33 13 16.46 15.8 1.4 0.1 • 2000 16 320 640 720
0.38 15 16.56 15.8 1.8 0.1 • 1500 16 320 640 720
0.45 18 16.70 15.8 2.0 0.1 • 1250 16 320 640 720
0.63 25 16.86 15.6 2.5 0.1 • 900 16 320 640 720
0.90 35 16.2 14.4 3.0 0.105 • 400 16 320 640 720
20 0.90 35 19.6 17.7 3.0 0.1 • 400 16 320 640 720
22 0.20 8 22.60 22.2 0.7 0.095 • 2000 16 320 640 720
0.25 10 22.70 22.2 0.8 0.095 • 1500 16 320 640 720
0.33 13 22.86 22.2 1.2 0.095 • 1250 16 320 640 720
0.38 15 22.96 22.2 1.4 0.095 • 1000 16 320 640 720
0.45 18 23.10 22.2 1.7 0.095 • 900 16 320 640 720
0.63 25 23.46 22.2 2.0 0.095 • 700 16 320 640 720
for any other diameter and wall thickness combinations please contact us
MAXIMAL LATERAL LENGTH (m), AT 10% FLOW
VARIATION*
TalDrip 0.6 l/h
Dripline Type Dripper Spacing (cm)
Nominal Wall Internal
diameter thickness diameter 20 30 40 50 60 70
(mm) (mil) (mm)
17 6 16.0 135 182 224 262 298 331
17 8 16.0 130 174 214 250 283 315
17 10 - 15 15.8 130 174 214 250 283 315
22 8 - 15 22.2 182 254 320 382 439 493
TalDrip 1.0 l/h
16 35 13.9 74 102 127 151 172 192
17 6-8 16.0 101 134 165 194 220 244
17 10 - 18 15.8 101 136 167 195 221 246
17 25 15.6 97 131 161 188 213 237
20 35 17.7 104 144 181 214 245 275
22 8 - 25 22.2 135 187 233 276 315 353
TalDrip 1.7 l/h
16 35 13.9 59 80 100 117 133 149
17 6-8 16.0 72 96 118 137 155 173
17 10 - 18 15.8 78 104 128 149 169 188
17 25 15.6 74 99 120 144 159 177
20 35 17.7 79 108 134 159 181 202
22 8 - 25 22.2 114 158 197 233 267 300
TalDrip 4.0 l/h

16 35 13.9 36 49 60 71 80 90
17 6-8 16.0 42 56 69 80 91 101
17 10 - 18 15.8 47 63 76 89 101 112
17 25 15.6 45 61 74 86 97 109
20 35 17.7 49 66 82 96 109 122
22 8 - 25 22.2 71 98 122 143 164 183
* On flat ground
* See maximum pressure in technical data table
25
THIN WALLED DRIP TAPE
Chapin-Drip Tape
Uniquely designed 16 mm
and 22 mm tape for increased
durability and clog resistance
with 50 years of world wide
experience
APPLICATIONS
• Irrigation of row crops, vegetables, flowers and
landscape BTF
• For sub-surface and surface drip irrigation
BTF Deluxe
• Extruded high quality polyethylene film ensures
round sides, providing higher resistance to field
abrasion and insect bites
• Multiple inlet orifices ensure a continuous water
flow to each dripper
• Turbulent flow path design provides larger internal
dimensions offering higher resistance to clogging
• Largest selection of flow rates, wall thicknesses.
fittings and accessories in the market
• Slit design outlets resist root intrusion and soil
ingestion
• Available in 16mm (5/8’’) and 22 mm (7/8’’) diameters
• Available wall thickness 4, 5, 6, 8, 10.12, 13 and 15 mil
• A low emitter exponent ensures less flow and
pressure variation on steep slopes to help increase
emission uniformity.
Deluxe
• In addition to the BTF features the Deluxe model

has: continuous filtration channel (328 inlets per
1 m) keeps the debris away from the flow path
and allows it to purge by flushing, ensuring high
performance and extends the life of the tape.
• Available wall thickness 5, 8, 10, 12, 13, 15 and 25 mil.
26
Chapin-Drip Tape
BTF Flow rates and spacing, 16 & 22 mm, 5-15 mil

Spacing Flow rates at 0.7 bar (10 PSI) Flow rates at 0.6 bar (8 PSI)
Filtration
gpm/ lph/ gph lph/ gpm/ lph/ lph/ mesh
inch cm gph/outlet
100ft 100 m /outlet outlet 100ft 100m outlet
4 10 0.65 484 0.13 0.49 0.52 387 0.10 0.39 200
4 10 1.00 744 0.20 0.76 0.80 595 0.16 0.60 200
4 10 1.33 989 0.27 1.01 1.06 792 0.21 0.80 150
4 10 1.80 1,339 0.36 1.36 1.44 1,071 0.29 1.09 150
6 15 0.50 372 0.15 0.57 0.40 298 0.12 0.45 200
6 15 0.65 484 0.20 0.74 0.52 387 0.16 0.59 150
6 15 1.33 989 0.40 1.51 1.06 792 0.32 1.21 150
8 20 0.25 186 0.10 0.38 0.20 149 0.08 0.30 200
8 20 0.30 223 0.12 0.45 0.24 179 0.10 0.36 200
8 20 0.40 298 0.16 0.60 0.32 238 0.13 0.48 200
8 20 0.50 372 0.20 0.76 0.40 298 0.16 0.60 200
8 20 0.65 484 0.26 0.98 0.52 387 0.21 0.79 150
8 20 0.85 632 0.34 1.29 0.68 506 0.27 1.03 150
8 20 1.50 1,116 0.60 2.27 1.20 893 0.48 1.81 150
12 30 0.25 186 0.15 0.57 0.20 149 0.12 0.45 200
12 30 0.30 223 0.18 0.68 0.24 179 0.14 0.54 200
12 30 0.40 298 0.24 0.91 0.32 238 0.19 0.73 150
12 30 0.50 372 0.30 1.13 0.40 298 0.24 0.91 150
12 30 0.65 484 0.39 1.47 0.52 387 0.31 1.18 150

12 30 1.00 744 0.60 2.27 0.80 595 0.48 1.81 150
24 61 0.10 74 0.12 0.45 0.08 60 0.10 0.36 200
1. The above flow rates are available in16 mm and 22 mm diameter, from 5 Mil to 15 Mil
2. Recommended operating pressure is 0.7 bar (10 PSI). Equivalent flow rates at 0.6 bar (8 PSI) are also included in this table
3. Install with emitters facing up
27
Chapin-Drip Tape
TECHNICAL DATA
DELUXE Flow rates and spacing, 16 & 22 mm, 5-15 mil

Spacing Outlets Flow rates at 0.7 bar (10 PSI) Flow rates at 0.6 bar (8 PSI) Filtration
/100ft mesh
inch cm gpm/100ft lph/100m gph/outlet lph/outlet gpm/100ft lph/100m gph/outlet lph/outlet
6 15 200 1.00 744 0.30 1.13 0.80 595 0.24 0.91 120
6 15 200 1.33 989 0.40 1.51 1.06 792 0.32 1.21 120
8 20 150 0.40 298 0.16 0.60 0.32 238 0.13 0.48 150
8 20 150 0.50 372 0.20 0.76 0.40 298 0.16 0.60 150
8 20 150 0.65 484 0.26 0.98 0.52 387 0.21 0.79 120
8 20 150 0.85 632 0.34 1.29 0.68 506 0.27 1.03 120
8 20 150 1.50 1,116 0.60 2.27 1.20 893 0.48 1.81 120
12 30 100 0.25 186 0.15 0.57 0.20 149 0.12 0.45 200
12 30 100 0.30 223 0.18 0.68 0.24 179 0.14 0.54 200
12 30 100 0.40 298 0.24 0.91 0.32 238 0.19 0.73 120
12 30 100 0.50 372 0.30 1.13 0.40 298 0.24 0.91 120
12 30 100 0.65 484 0.39 1.47 0.52 387 0.31 1.18 120
12 30 100 1.00 744 0.60 2.27 0.80 595 0.48 1.81 120
16 41 75 0.20 149 0.16 0.60 0.16 119 0.13 0.48 200
16 41 75 0.25 186 0.20 0.76 0.20 149 0.16 0.60 200
16 41 75 0.30 223 0.24 0.91 0.24 179 0.19 0.73 200
16 41 75 0.40 298 0.32 1.21 0.32 238 0.26 0.97 120
16 41 75 0.50 372 0.40 1.51 0.40 298 0.32 1.21 120
18 46 67 0.50 372 0.45 1.70 0.40 298 0.36 1.36 120
24 61 50 0.15 112 0.18 0.68 0.12 89 0.14 0.54 200
24 61 50 0.20 149 0.24 0.91 0.16 119 0.19 0.73 200
24 61 50 0.30 223 0.36 1.36 0.24 179 0.29 1.09 200
24 61 50 0.50 372 0.60 2.27 0.40 298 0.48 1.81 120
1. The above flow rates are available in 16 mm and 22 mm diameter, from 5 Mil to 15 Mil
2. Recommended operating pressure is 0.7 bar (10 PSI). Equivalent flow rates at 0.6 bar (8 PSI) are also included in this table
3. Install with emitters facing up
28
Chapin-Drip Tape
CHAPIN PACKAGING AND SHIPPING
Estimated quantity in container
Wall
Coil length Coils per
thickness 20' 40'
(m) pallet #
(mil)
Pallets Coils Pallets Coils
BTF 16 mm (5/8")
4 4,573 12 20 240 39 468
5 3,659 12 20 240 40 480
6 3,049 16 20 320 38 608
7 2,561 16 20 320 40 640
8 2,287 16 20 320 40 640
10 1,829 16 20 320 40 640
12 1,524 16 20 320 40 640
15 1,200 16 20 320 40 640
BTF 22 mm (7/8")
6 2,287 16 20 320 40 640
7 1,982 16 20 320 40 640
8 1,677 16 20 320 40 640
10 1,372 16 20 320 40 640
13 1,067 16 20 320 40 640
15 915 16 20 320 40 640
DELUXE 16 mm (5/8")
6 3,049 28 10 280 20 560
8 2,287 28 10 280 20 560 BTF & Deluxe 16 mm
10 1,829 28 10 280 20 560 70
1339
12 1,524 28 10 280 20 560 1116 79
15 1,220 28 10 280 20 560 989 85
744 103
Flow rate (lph/100m)
DELUXE 22 mm (7/8" )
632 114
6 2,287 12 20 240 40 480
484 136
8 1,677 12 20 240 40 480 372 161
10 1,372 12 20 240 40 480 298 186
13 1,067 12 20 240 40 480 223 224
186 252
15 915 12 20 240 40 480
149 292
75 457
0 100 200 300 400 500 600 700 800 900

Length (m)
MAXIMUM LATERAL LENGTH (m)*
BTF & DELUXE 16 mm
BTF & Deluxe 16 mm BTF & DELUXE 22 mm
BTF & Deluxe 22 mm
1339 70 1339 124
1116 79 1116 137
989 85 989 151
744 103 744 182
(lph/100m)
(lph/100m)
(lph/100m)
rate (lph/100m)
632 114 632 202

484 136 484 241
372 161 286
372
rate
rate
Flow rate
298 186 298 330

Flow
Flow
223
Flow
224 223 398

186 252 186 448
149 292 149 518
75 457 75 812
0 100 200 300 400 500 600 700 800 0

900 100 200 300 400 500 600 700 800 900
Length(m)
Length (m) Length (m)(m)
Length
* EU - 90% uniformity, on flat ground, when inlet pressure is 0.7 bar
BTF & Deluxe 22 mm

29
NDJ DripKit
Gravity-Powered
Drip irrigation System
NDJ DripKit is the ideal solution for the irrigation

and fertigation of small plots. This comprehensive
kit allows small holders to achieve better yields,
using their existing resources.
BENEFITS
• Increased yields
• Increases water use efficiency
• Improves water and fertilizer distribution
• Reduces manual labor
• Reduces evaporation and run-off
• Reduces weed growth
• Eliminates wetting of the foliage, reducing fungal
diseases
APPLICATIONS
• Irrigation and fertigation of small plots up to 500 m2
• Adequate for all crops, such as vegetables, cereals,
pulses, fruit trees, and herbs
• For open field or greenhouse installation
FEATURES
• Two different models: 250 m2 & 500 m2
• Fully gravity-powered - no need for pump or power source
• Full kit supplied in one box
• Easy assembly and operation - no need for previous
experience
• Fully modular - can be easily disassembled and stored
• High quality NDJ accessories & 12 mm dripline
• Resistant materials for application of soluble fertilizers
• Suits any plot shape within the size range
• Special male/female take-off for easy lateral plugging
when only partial irrigation is required
30
NDJ DripKit
EACH DRIPKIT INCLUDES:
• Dripline coil for lateral spacing of 1.0 m with 30
cm dripper spacing
• 25 mm polyethylene submain
• Filter
• Valve
• All necessary fittings, punching tools and teflon tape
• Spare fittings for damage repair and for multiple
choice of installation forms
• Picture instruction manual - suits speakers of all
languages
TECHNICAL DATA AND INSTALLATION

Weight Kits per Kits per
RECOMMENDATIONS: Product Cat. # 20 ft
per kit container* 40 ft
container*
• Recommended water tank volume (supplied
DripKit
upon order): 500m2
J67002J0010 20 kg 189 399
For 250 m2 plot: 200-300 liters
DripKit
For 500 m2 plot: 400-600 liters 250m2
J67002J0000 14 kg 297 600
• Water tank must be at least 1.5 m above the
* Not Palletized
plot level
* Palletized shipment = 15% less units
• Maximum lateral length: 25 m
31
J-Turbo Line 12 mm
All-purpose dripline ideal
economical solution for irrigation
of short rows and greenhouses
2.4 l/h 4.0 l/h
PERFORMANCE GRAPH
8
• Manufactured from high performance polyethylene
4.0 l/h
• Three features contribute significantly to clog 7
resistance: 6
- Multiple inlet filters provide large filtration area 5
Flow rate (l/h)
- Cylindrical shape facilitates wide flow path 2.4 l/h

4
- Turbulent flow path
3
• Excellent CV ensures optimal field emission
uniformity 2
• J-Turbo Line also supplied in group spacings 1

• Filtration recommended: 130 micron, (120 mesh) 0
0.5 1.0 1.5 2.0 2.5 3.0 3.5
Pressure (bar)
TECHNICAL DATA
Wall Dripper Dripper Maximum Coil
Nominal OD ID Conn.
thickness flow rate spacing working length
diameter (mm) (mm) barb
mm (l/h) (cm) pressure (bar) (m)
12 0.65 11.8 10.5 ● 2.4, 4.0 20-100 2.0 500
0.90 12.3 10.5 ● 2.4, 4.0 20-100 3.5 400
1.10 12.7 10.5 ● 2.4, 4.0 20-100 3.5 400
MAXIMAL LATERAL LENGTH

(m) AT 10% FLOW RATE
VARIATION HAVING A 1 BAR
INLET PRESSURE*
J-Turbo Line - 12mm Pressure Flow rate (l/h)
(bar)
Dripper 2.4 (l/h) 4.0 (l/h)
flow rate Dripper spacing (cm) 0.5 1.6 2.7
(l/h) 1.0 2.3 3.8
20 30 40 50 60 75 100 1.5 2.8 4.6
2.4 29 38 45 52 59 67 82 2.0 3.2 5.3
4.0 21 27 32 38 42 49 59 2.5 3.6 5.9
3.0 3.9 6.4
* On flat ground
3.5 4.2 6.9
* See pressure range in the technical data table
32
TurboDrip
High flow PC dripper
27 l/h 35 l/h 43 l/h 60 l/h
Available with spike 34 red, catalog no. 897917
APPLICATIONS
• Irrigation in desert condition where high daily 60 l/h
Flow rate (l/h)
quantities are required. Common for large tree 43 l/h

gravity irrigated 35 l/h
25 l/h
• High flow rate self-compensated dripper
• Constant flow between 1.0 - 4.0 bar pressure Pressure (bar)
• Uniform irrigation and fertigation in all topographical
conditions
• High resistance to clogging due to big and wide
water passages
• Low maintenance emitter
• Easy for assembling and dismantling for maintenance
purposes
• Made from Chemical resistant material
• High resistance against clogging
TECHNICAL DATA
• Recommended working pressure: 1.0 - 4.0 bar
• Flow rate: 27 - 60 l/h
• Filtration requirement: up to 35 l/h - 130 micron
up to 43 l/h - 200 micron
Nozzle Discharge
Code
Color (l/h)
Black 27 771908
Violet 35 771904
Brown 43 771900
Red 60 771907
33
ON-LINE PC BUTTON DRIPPERS
ClickTif HD
Heavy Duty Pressure-Compensating
(PC) & Compensating Non-Leakage
(CNL) on-line Button Dripper
Taper lock outlet Barb outlet 3/5
PC CNL PC CNL
APPLICATIONS COLOR CODE

• Greenhouses, nurseries. orchards, Vineyards,
landscapes and garden plots
• Pulse irrigation and irrigation in soilless conditions 1.3 l/h 2.0 l/h 3.0 l/h 4.0 l/h 8.0 l/h 12.0 l/h
• Prevents surplus drainage in low places (CNL model) Maximum recommended lateral length (m) on flat ground*
Dripper Inlet 16mm ID - 13.4mm KD= 0.4 20mm ID - 17.0mm KD = 0.15
STRUCTURE AND FEATURES flow rate pressure Dripper spacing (cm) Dripper spacing (cm)
• Heavy Duty range of drippers and accessories in (l/h) (m) 20 40 60 80 100 20 40 60 80 100
10 84 132 172 208 240 131 205 279 335 385
various configurations 15 107 169 219 264 305 167 260 340 410 474
• Four dripper design elements minimize clogging: 20 123 194 252 304 352 205 319 413 498 573
1.3 25 137 215 279 337 389 212 334 433 523 603
1. Protected water inlet 30 148 232 302 364 420 229 360 469 564 653
2. Flushing mechanism of regulating diaphragm 35
40
157
169
247 322 388
263 341 409
448
472
244
258
383 499 602
405 527 635
695
733
3. Strong turbulent flow in labyrinth enables continual 10 64 100 130 157 180 125 195 255 306 357
15 81 127 165 199 230 134 209 271 325 375
cleaning and flushing 20 91 146 191 230 266 145 227 295 356 412
4. Large water passages 2 25
30
103
111
162 211 254
172 223 268
294
310
160
173
252 328 394
272 353 427
455
493
• Color-coded for identification of discharge and model 35 119 187 243 293 339 184 290 378 454 525
40 125 197 257 309 358 195 306 397 480 554
• Standard 5 mm tapered outlet for working with 10 49 77 100 120 138 77 119 155 187 215
connectors or barb outlet for 3/5 tube 15
20
62
71
97 127 153
113 147 177
177
204
97
112
152 197 238
174 228 273
275
317
• Chemical-resistant, high-grade plastic for precision 3 25 79 125 162 195 226 123 192 252 303 350
30 86 135 175 211 244 132 208 272 328 378
and durability 35 91 143 187 225 260 142 222 289 348 403
• Two models available: PC and CNL (Compensating 40
10
97
41
151 197 237
61 82 99
275
115
150
63
235 307 368
98 128 155
427
179
Non-Leakage) 15 51 81 105 127 147 81 126 163 197 228
20 59 91 121 146 169 92 145 188 227 262
• Unique “sharp edge” CNL design prevents dirt 4 25 66 103 134 162 187 103 160 208 251 290
accumulation and ensures reliable operation under 30 71 111 145 175 202 111 173 225 272 314
35 79 123 160 194 224 118 184 240 289 335
difficult conditions 40 81 129 166 199 230 123 195 352 306 352
10 25 41 51 61 71 40 62 82 98 114
• 6 different flow rates 15 33 51 67 81 91 52 80 104 125 145
20 38 59 77 91 107 58 93 120 144 168
TECHNICAL DATA 8 25 42 65 85 103 119 65 102 133 160 180
30 45 71 93 111 129 71 111 142 172 200

• Nominal discharge: 1.3, 2.0, 3.0, 4.0, 8.0, 12.0 l/h 35 49 75 98 119 137 75 117 152 183 212
• Regulating pressure range: 0.5-4.0 bar 40 51 80 104 125 145 78 123 161 194 225
10 19 31 40 48 56 31 47 63 75 87
• Very low CV 15 25 39 51 62 71 39 63 80 96 111
• Minimum recommended working pressure 1.0 Bar 20 29 45 59 71 83 45 70 91 112 129
12 25 32 50 65 79 91 50 78 103 123 142
• Non-Leakage (CNL): - Opening pressure: 8.0 m 30 34 55 71 85 99 54 84 110 133 153
- Closing pressure: 3.0 m 35 37 58 75 91 105 57 95 118 142 163
40 39 61 80 96 111 61 97 124 149 172
• Filtration Recommendation: 130 micron (120 mesh) * Minimum pressure at lateral end: 0.5 bar for PC and 0.8 bar for CNL drippers
** Lateral length exceeding 800 m is not recommended
*** It is better to restrict pressure losses in the lateral not to exceed 1.5 bar on a flat terrain
34
e
ClickTif HD Accessories
Drop guide
Labyrinth
stake,
Straight
Stabilizer
stakeElbow 3/5 PVC or PE extension Stabilizer
straight Water filter inlet tube stabilizer stake
labyrinth stake labyrinth stake stake
Water filter inlet
2.0 l/h labyrinth
2.1 l/h labyrinth Inspection drop window
Drop split knife

Inspection drop window
2, 4, 8 outlets with flow control stakes
Drop split knife
Catalog no. Catalog no. Catalog no. Catalog no.

802870 802800 802850 6466040000
DROP GUIDE 3/5 mmoutlet connectors

Use as single outlet for drop guide
LABYRINTH STAKES
Catalog no. Catalog no. Catalog no.
Can be used as an independent dripper or to stabilize flow rate 802908 802920 802940 2, 4, 8 outlets with flow
at multiple outlets control stakes
3/5 PVC or PE extension tube
When working with multiple outlets: stabilizer stake Multi-level connectors 2.5 mm Punch
1. Use labyrinth stakes to improve uniformity Special design for comfortable punching
2. Minimum recommended working pressure: 1 bar and inserting of ClickTif drippers
3. Maximum recommended flow per outlet: 2.0 l/h
4. Minimum recommended flow per outlet: Catalog no.
Catalog no. Catalog no.
• Flat surface and uniform tube length
3/5 -Connectors
0.5 l/h 897284
802928 802948
• On a slope or uneven elevation - 1.0 l/h
Recommended combinations:
Number of Dripper flow rate l/h
outlets 1.3 2 3 4 8 12
2 • • • • - Multi-level
- connectors*
3 - • • • - -
4 - • • • • -
5 - - • • • -
6 - - • • • •
• Only on flat surface and with uniform tube length * The minimum recommended flow per outlet
• conditions, including slopes and uneven elevations

For all
Flat surface and uniform tube length - 0.5 l/h
On a slope or uneven elevation - 1.0 l/h
FLOW RATE VS. PRESSURE

Flow rate (l/h)

Pressure
(m) Elbow labyrinth stake Straigt labyrinth stake
Catalog no. 802850 Catalog no. 802800
5 1.5 1.6
10 2.0 2.3
15 2.5 2.8
20 3.5 3.2
35
ON-LINE PC BUTTON DRIPPERS
J-SC-PC-Plus
Openable Pressure-
compensating (PC) on-line
button dripper
APPLICATIONS TECHNICAL DATA

• Recommended for orchards, fruit crops, vegetables, Cap color Discharge Emitter exponent Flow coefficient
and insert (l/h) (x) (k)
nurseries & flowers Yellow 2.2 0.04 2.4
• Ideal for undulating terrain and steep slopes Black 4.2 0.03 4.2
Blue 8.2 0.08 7.5
• Dripper can be opened to facilitate easy cleaning
• Manufactured from virgin plastic for stable
performance
• Silicone rubber diaphragm ensures consistent
performance for longer period
• Narrow cross-shaped inlet acts as a filter
• Optional anti-bug cap prevents intrusion of insects
• Self-cleaning design ensures flushing at all times
during operation
• Wide operating pressure-compensating range allows
longer length of laterals
TECHNICAL DATA
• CV≤ 5%
• Regulating pressure range: 1.0-3.0 bar
• Filtration requirement: 130 micron, (120 mesh)
Required punch diameter: 2.9 mm
36
ON-LINE NON-PC BUTTON DRIPPERS
J-Turbo KeyPlus
Openable on-line button
dripper
APPLICATIONS FLOW VS. PRESSURE

• Recommended for orchards, fruit crops, plantations, Pressure
Flow rate (l/h)
nurseries and landscapes (bar)
2 (l/h) 4 (l/h) 8 (l/h) 14 (l/h)
STRUCTURE AND FEATURES 0.5 1.4 2.9 5.7 10.0
• Dripper can be opened to facilitate easy cleaning 1.0 2.0 4.0 8.0 14.0
1.5 2.4 4.9 9.7 17.0
• Manufactured from virgin plastic for stable 2.0 2.8 5.6 11.2 19.5
performance 2.5 3.1 6.2 12.4 21.7
• Turbulent flow path with wide cross-sectional area 3.0 3.4 6.8 13.6 23.7
3.5 3.6 7.3 14.6 25.5
ensures clog resistance
• Extended outlet facilitates use of PE extension tube
or vinyl tube
• Narrow cross-shaped inlet act as a filter
• Colored cap facilitates easy identification of flow rate
20
TECHNICAL DATA 14 l/h
18
• CV≤ 3% 16
• Recommended operating pressure: 0.5-2.5 bar 14
• Filtration requirement: 100 micron, (150 mesh)
Flow rate (l/h)
12
• Required punch diameter: 2.9 mm 8 l/h
10
8
TECHNICAL DATA AND COLOR CODE
6
Cap color Discharge* Emitter exponent Flow coefficient 4 l/h
4
and insert (l/h) (x) (k)
2 2 l/h
Yellow 2 0.48 2.0
Black 4 0.48 4.0 0
Blue 8 0.48 8.0 0 0.5 1.0 1.5 2.0 2.5

Green 14 0.48 14.0 Pressure (bar)
* At operating pressure of 1 bar
37
Lateral Flush Valve
Automatic lateral flush valve for
efficient dripline maintenance
Record
Cover
Membrane
APPLICATIONS
• For surface and subsurface drip irrigation
• Automatically flushes the drip lateral at the Body
beginning of every irrigation

• Effective in water quality conditions that require
frequent flushing
• Saves manual labor
STRUCTURE AND FEATURES TECHNICAL DATA
• Robust, simple structure with no metal parts • Operating pressure: 0.5-3.0 bar
• High-quality, chemical resistant materials • Flushing time: 15-25 seconds
• Large water passages for maximum reliability • Flush volume: 2-3 liters
• Large variety of end connections to suit all dripline Installation: Please install flush valve at the same level or
types (see table) above the last dripper, with the red cap facing up.
• Red ring for easy identification and inspection
• Possible to open and clean PRODUCT RANGE
Description Catalog No.
Thread 1/2” male 790701
Barb 16 mm
790716
(for W.T 0.9-1.2mm, ID 13.9)*
Barb 17 mm
790717
(for W.T 0.9-1.2mm, ID 14.4)*
Barb 20 mm
790720
(for W.T 0.9-1.2mm, ID 17.7)*
Tape 17 mm (5/8”)
790727
(for W.T 10-18mil, ID 15.4-16mm) black ring
Tape 17 mm (5/8”)
790728
(for W.T 25 mil, ID 15.4-16mm) brown ring
Tape 17 mm (5/8”)
790729
(for W.T 35 mil, ID 15.4-16mm) red ring
*All barb connectors come with a free snap clip. Use it to secure the
flush valve in place
38
Lateral LPD
Dripline leakage prevention
device
Outlet Cover Ring Sleeve Body Inlet
APPLICATIONS PRODUCT RANGE

Outlet
Installed at the beginning of drip laterals Inlet* (integral)* Catalog no. Catalog no.
connector
• Prevents draining of sub-main and main pipes after Barb 16 mm 1/2” male x
system shut-off (for W.T 0.9-1.2 mm, 790616 6424040610
barb 16 mm
ID 13.9 mm)
• Improves irrigation uniformity by synchronizing Barb 17 mm 1/2” male x
lateral opening and closure along the sub-main (for W.T 0.9-1.2 mm 790617 6424040620
barb 17 mm
ID 14.4 mm)
• Reduces system filling time Barb 20 mm
• Can reinforce CNL driplines and button drippers 1/2” male x
(for W.T 0.9-1.2 mm 790610 6424040630
barb 20 mm
where slopes exceed the closing pressure of CNL ID 17.7 mm)
Tape 17 mm ( 5/8”)
Installed along the lateral (for W.T 10-18 mil 790627 1/2” male x 6425041003
• In steep slopes, it improves water distribution during ID 15.4-16.2 mm) tape 17 mm
black ring
lateral draining Tape 17 mm (5/8”)
(for W.T 25 mil, 1/2” male x
STRUCTURE AND FEATURES 790628 6425041003
ID 15.4-16.2 mm) tape 17 mm
• Simple, plastic 4 - part structure brown ring
• Available with a large variety of end connections Tape 17 mm (5/8”)
(for W.T 35 mil, 1/2” male x
• Outlet is ½” female-threaded NPT in all options 790629 6425041003
ID 15.4-16.2 mm) tape 17 mm
• Low head loss red ring
• Recommended working pressure 1.4-4 bar Thread 3/4” male 790602
Hose Thread 3/4” 790630
OPERATING PRESSURE USA Version
• Opening pressure - 14 m *All outlets are thread NPT 1/2” female
• Closing pressure - 6 m
TECHNICAL DATA
Lateral Discharge Head Loss
(l/h) (m)
250 0.1
500 0.2
750 0.8
1000 1.1
1250 1.3
1500 2.6
39
Connectors
BARB CONNECTORS FOR: NAANPC, AMNONDRIP, TIFDRIP & TALDRIP16, 20 mm
Barbed/Threaded Multi-Outlets
1 3
Item # Item #
Description Qty/Bag
20 mm 16 mm
1 6-way 3/4” female 6424045020 6424045010
2 4-way 3/4” female 6424234000 6424044010
50
3 3-way elbow 3/4” female 6424042050 6424042010 2 4
4 3-way straight 3/4” male 6424043030 6424043010
Barbed/Threaded Connectors
Item # Item #
Description Qty/Bag
20 mm 16 mm
1 Tee barb 3/4” female 6424040230 6424040210 1 3 4
2 Tee barb 3/4” male 6424040050 6424040040 50
3 Y connector 3/4” male 6416040600 6416040200
4 Barbed connector 3/4” male 6424040635 6424040615 5
4 Barbed connector 1/2” male 6424040630 6424040610 100 2
5 Elbow barb 3/4” male 6424040450 6424040445
Barbed Connectors
Description Item # Qty/Bag
1 Barbed connector silver ring 20 x20 483222
2 Barbed connector 16 x 16 483161 1 4
2 Barbed connector 17 x 17 6423040620
3 Barbed reducer 20 x 17 6423040830
3 Barbed reducer 20 x 16 6423040850
2 5
3 Barbed reducer 17 x 16 6423040820 100
Item # Item #
20 mm 16 mm
4 Tee barbed 6423040030 6423040010
3 6
5 Tee reducer barbed 20x16x20 6423040250
6 Elbow barb 6423040440 6423040410
7 Star 3-way - 6423049900
7
Start Connectors & Accessories
Item # Item #
Description Qty/Bag
20 mm 16 mm
1 Quick start for PE & PVC 6431041000 6431040400
2 Grommet for quick start for PVC 6431999900 6431999900
3 End line 6419300420 6419300410 100 1 3 5

4 Snap clip 6720150825 6720150815
5 Vine drip clip 809000
6 Dripper plug for AmnonDrip & TopDrip * J67202J9901 J67202J9900 2 4 6
* Installation must be done under water pressure
For above 0.63 mm wall thicknesses
Fits a hole with a 1.6-1.9 mm hole size (in the narrow part of the hole)
40
Connectors
FITTINGS FOR TALDRIP, TOPDRIP & CHAPIN 16;17 & 22;23 TAPE LOCK, 4-35 MIL
Description Item # Qty/Bag 1 5

1 Tape 16;17 x 16 barb 6425040438 800
1 Tape 22;23 x 20 barb 6425041017 700
2 Tape 16;17 x 3/4”M 6425041005 1000 2
3 Start conn. & grommet 6431040402 700 6
4 Tape 16;17 x 16;17 6425040436 800
4 Tape 22;23 x 22 ;23 6425041015 400 3
5 Start conn. for layflat 6431040403 300
6 PE start conn. & grommet & valve 6431040401 300 7
7 Tape 16; 17 x 16; 17 valve 6425040015 250 4
RING CONNECTORS: THIN-WALLED 16; 17MM, 10-35MIL FOR TALDRIP & TOPDRIP
Item # Item # Item # Qty/ 1 3

Description Black Brown Red Bag
6-18 mil 25 mil 35 mil
1 Start connector 16/17 6431301505 6431302005 6431303005
2 Connector 16/17 x 16 barb 6425300638 6425300640 6425300642
Tee 16/17 x 16 x 16/17 6425300606 6425300610 6425300614 2 4
3
Tee 17 x 20 x 17 6425300608 6425300612 6425300616
Connector 16/17 x
4 6425300646 6425300648 6425300650 5
16/17 100
5 End line 16/17 6425300655 6425300656 6425300658
Ring for connector
Black: 6-18 mil
6 6425300600 6425300602 6425300604
Brown: 25 mil
Red: 35 mi 6 7
Grommet for quick start
7 6431999900 6431999900 6431999900 100 / 1000
for PVC
41
Lay Flat
Flexible PVC Hose
The perfect water delivery
solution for open field crops
Easy to handle portable irrigation
system
SF10 SF55
APPLICATIONS: SPECIFICATIONS:
• For Irrigation as water supply main pipe or as a • Available - in 1.5”, 2”, 3”. 4”, 6”, 8”
submain with start connectors • Coil length - 100 meters (special order for other
• Also for, Mines, mine leaching systems length)
FEATURES AND ADVANTAGES • Temp use range- -20˚C to 76˚C (-5˚F to 170˚F).
When Temperature is -15˚C and colder, please
• Can be used in extreamly high (up to 10 Bar)
DO NOT handle or transport hoses.
working pressure (Acording to pipe diameter and
• If temperature exceeds 43˚C (110˚F) the maximal
selected connectors)
working pressure will decrease
• Robust and durable reinforced 3-ply Polyester Yarns
• Low expansion and zero axial elongation
• Reduced fright and storage costs - due to flat and
compact coil design TECHNICAL DATA
• Reduced head losses - due to enlarged internal
Code Nominal Max. Max. Wall Internal Meter/ Kg/roll
diameters size Working Working thickness diameter roll
• Easy to layout, retrieve and move from one (inch) pressure pressure (mm) (mm*)
(BAR) (BAR)
installation to another as supply as sub
• Enabels tractors activity and crossing over the line main
without with
hose (when drained) start start
conn. conn.
• Full package solution - Pipes, Couplings, Tightening
clamps, Punchers, Start connectors, Valves Grey - SF55
• Lay Flats with pre assembled outlets at required 6599600209 1.5” 10 4.0 1.60 38.1 100 29.8
6599600204 2” 10 4.0 2.21 50.8 100 53.6
spacings, can also be supplied
6599600206 3” 10 2.5 2.54 76.2 100 96.2
6599600228 4” 6.9 2.5 2.89 101.6 100 138.9
6599600229 6” 6.9 * 3.71 152.4 100 248
Blue - SF10
6599600212 1.5” 5.5 1.5 1.50 38.1 100 27.8
6599600211 2” 5.5 1.5 1.50 50.8 100 36.2
6599600207 3” 5.5 1.5 1.60 76.2 100 53.6
6599600208 4” 4.8 1.0 1.70 101.6 100 78.4
6599600231 6” 4.1 * 1.90 152.4 100 128.5
6599600232 8” 2.4 * 2.21 203.2 100 193.5
*Not recommended for sub main
42
Lay Flat
Quick Couplings
Description Item # Picture
CamLock Female 2” X 2” M thread BSP 6405600836
CamLock Female 2” X 2” Hose 6405600838
CamLock Female 3” X 3” Hose 6405600854
CamLock Male 2” X 2” Hose 6405600842
CamLock Male 3” X 3” Hose 6405600021
CamLock Male 2” X 2” M thread BSP 6405600844
CamLock Male 3” X 3” M thread BSP 6405600845
CamLock Male 2” X Plug 6405600848
CamLock Male 3” X Plug 6405600864
CamLock Female 2” X Plug 6405600846
CamLock Female 3” X Plug 6405600862
Barb Connectors
Description Item #
Straight connector 2” X 2” 6405600019
Straight connector 3” X 3” 6405600018
Straight connector 4” X 4” 6405600017 Tightening clamps
Reducer 3” X 2” 6411999901 Description Item #
Reducer 4” X 3” 6411999900 2” steel tightening clamp 6405600056
Adaptor 2” M thread BSP X 2” Hose 6405600062 3” steel tightening clamp 6405600000
Adaptor 3” M thread BSP X 3” Hose 6405600063 4” steel tightening clamp 6405600002
Adaptor 4” M thread BSP X 4” Hose 6405600065
Adaptor 3” M thread BSP X 4” Hose 6405600064 2”- 4” wide steel tightening clamp
Available upon request
Adaptor 2” M thread BSP X 3” Hose 6405600066
Plug 2” 6419590030
Plug 3” 6419590031 Punchers
Plug 4” 6419590032 Description Item #
Connector LF 3”x3” Saddle 75 6405600046 14 mm puncher for 16;17 mm start connectors 6130210432
Adaptor LF 3”x2” male thread 6405600028 19 mm puncher for 22;23 mm start connectors 6130210430
Adaptor LF 3” to Alum.3” Hook 6405600038

Start connectors
Saddle 2 bolts 75 x 3/4” 6430020070 Description Item #
Start connector 3/4” (14 mm) 6431049920
Double saddle 4 bolts 75 x 1.5” 6430020810 Start connector 16, 17 mm for thin walled
6431040403
drip lines
43
LANDSCAPE - THICK WALLED NON-PC CYLINDRICAL DRIPLINE
Jardiline
Heavy-duty 16 mm dripline for
landscape irrigation
APPLICATIONS Available also in purple for a minimum order of 40K m. And

add Purple dripline picture
• On the surface or under mulch installations
• Shrubs, trees and flower beds TECHNICAL DATA
• For flat surfaces and narrow planting areas • Dripper flow rates: 2.1 & 3.6 l/h (at 1.0 bar pressure)
STRUCTURE AND FEATURES • Dripper spacing: 33, 40, 50 cm (other spacing
• Strong yet flexible pipe structure with heavy-duty available on request)
cylindrical drippers • Maximum operation pressure: 3.5 bar
• Cascade labyrinth with wide water passages and a • Internal diameter (ID): 13.9 mm (suitable for all
self-cleaning effect standard 16 mm barb fittings)
• Double water inlets and outlets for extra clogging resistance • Wall thickness: 1.0 mm
• Brown, UV-protected color - blends with the • Coil lengths: 50, 100, 200 and 400 m
ground or mulch colors
• Also available in purple for marking the use of MAXIMUM LATERAL LENGTH (m) AT 10%
non-potable water FLOW RATE VARIATION AND I BAR INLET PRESSURE*
FLOW RATE VS. PRESSURE Dripper spacing Dripper flow rate (l/h)
Dripper Flow rate (l/h) (cm) 2.1 3.6
2.1 3.6
P (bar) 7.00
0.5 1.50 2.58
33 65 46
3.6 l/h
1.0 2.10 3.60 5.25 40 76 54
1.5 2.55 4.37 50 90 64
2.0 2.93 5.02 3.50
2.1 l/h * On flat surface
2.5 3.26 5.59
2.00
3.0 3.56 6.10
3.5 3.83 6.57
0.00
a 0.695 1.192
0.5 1.0 1.5 2.0 2.5 3.0 3.5
x 0.48 0.48 Pressure (bar)
PACKAGING AND SHIPPING
Total Pallets Coils Total

Coils Pallets Coils
Coil meters per per meters
per per 20ft per 20ft
length 20 ft 40 ft. HC 40 ft. HC 40 ft. HC
pallet container container
container container container container
50 36 20 720 36000 40 1440 72000
100 40 10 400 40000 20 800 80000
200 _ 264 52000 _ 558 111600

Non
Palletized _ _
400 165 66000 350 14000
44
LANDSCAPE - THICK WALLED PC CYLINDRICAL DRIPLINE
Super Jardiline
Pressure-compensating, 16 mm
heavy-duty dripline for landscaping
applications
Available also in purple for a minimum order of 40K m. And

APPLICATIONS add Purple dripline picture
• On surface or under mulch installations
TECHNICAL DATA
• Shrubs, trees, turf and flower beds
• Irrigation in slopes and variable topography • Dripper flow rates: 1.6 and 2.2 l/h
• For high uniformity of water distribution in • Pressure - compensating range: 0.5-3.5 bar
large areas • Dripper spacing 33, 40, 50 cm (other spacing
available on request)
STRUCTURE AND FEATURES • Maximum operation pressure: 3.5 bar
• Accurate pressure- compensation results in • Internal diameter (ID): 13.9 mm (suitable for all
uniform dripper flow rate under all pressures standard 16 mm barb fittings)
within 0.5-3.5 bar • Wall thickness 1.0 mm
• Strong yet flexible pipe structure with heavy-duty • Coil lengths: 50, 100, 200 and 400 m
cylindrical drippers
MAXIMUM LATERAL LENGTH*
• Cascade labyrinth with wide water passage and
Dripper spacing (cm)
a self-cleaning effect Flow rate
Inlet
pressure
• Double water inlets and outlets for extra clogging (l/h)
(bar) 33 40 50
resistance 3.0 150 180 230
• Brown, UV-protected color - blends with the ground 1.6 2.0 120 160 180
or mulch colors 1.0 80 100 120
• Also available in purple for marking the use of 3.0 120 150 180
non-potable water 2.3 2.0 90 120 140
1.0 60 80 100
* On flat surface, minimum pressure at lateral end = 0.5 bar

PACKAGING AND SHIPPING
Total Pallets Coils Total
Coils Pallets Coils

Coil meters per per meters
per per 20 ft per 20 ft
length 20 ft 40 ft. HC 40 ft. HC 40 ft. HC
pallet container container container container container container
50 36 20 720 36000 40 1440 72000
100 40 10 400 40000 20 800 80000
200 _ 264 52000 _ 558 111600

Non
Palletized _ _
400 165 66000 350 14000
45
Drip Irrigation System Maintenance
ACID TREATMENT Example:
Application of acid is recommended as part of a routine • Acid needed for receiving pH (2.0) in the 10 liter bucket = 12 cc
maintenance procedure. Acid injection reduces clogging • 12 cc X 100 = 1200 cc = 1.2 liters
caused by low solubility salts, such as calcium carbonate. • Inject 1.2 liters of acid per 1 m3 of the system discharge
The following recommendations are for hydrochloric • System discharge (of the treated sector) = 30 m3/h
acid 33% or phosphoric acid 85%. • System discharge during the 15 minute treatment= 7.5 m3
• Acid required = 1.2 liter X 7.5 = 9 litter
Determining the acid quantity to be injected: • Max. injector discharge = 200 l/h
Take a 10 liter bucket and gradually start adding acid in • Total solution volume required (¼ of 200 liters) = 50 liters
small portions and measuring the accepted pH. Once • 50 liters of solution = 9 liters of acid + 41 liters of water
you reach the required pH of 2.0, calculate the amount • Injection time = 15 minutes (50 liters injected with a 200
of acid required for receiving this value in your system l/h injector)
by multiplying the acid quantity by 100 and injecting this
amount per 1 m3 of the system discharge. LATERAL FLUSHING
Lateral flushing flushes out debris that accumulates in the
IMPORTANT
dripline and can eventually clog the dripper’s water inlet or
While preparing the acid solution Always add the acid to
labyrinth.
the water and not vice versa.
During the irrigation season, laterals should be flushed every
2-3 weeks. Flushing is done by opening the lateral end for
Treatment instructions: 30-60 seconds until the water coming out of the lateral is clear.
1. Treatment should be carried out 1-2 times during the Flushing with a flushing submain or with a NaanDanJain
irrigation season or when system discharge drops by 5% Lateral Flush Valve will reduce costs of manual labor and
2. Flush all submains and laterals before starting the guarantee frequent flushing.
treatment
3. Check the discharge of the system before the
treatment so you can later compare this with the
discharge of the treated system
4. Solution preparation: The solution volume (water +
acid) should be equal to one quarter (¼) of the hourly
discharge of the injector. This way the injection will last
for 15 minutes
We recommend working with the maximum injector
discharge in order to avoid working with a highly
concentrated solution
5. Start the injection only after the system is full of water
and the drippers are emitting
6. Control: Using a litmus indicator strip, check the pH
at the furthest lateral for residual acid (pH 2.0). A
second application is recommended if no residual acid
is detected
7. Inject during 15 minutes
8. Continue irrigation for 30-60 minutes to ensure the
complete flushing of the system
9. Check the discharge of the system
46
Drip Irrigation System Maintenance
CHLORINATION
Chlorine is a biocide that kills micro organizm: bacreria
,algue etc. Chlorine injection wil reduce clogging and help
keeping the irrigation lines clean. It is recommended as
an intermittent treatment or as an ongoing preventive
treatment in systems that use water that contains a high
concentration of organic materials.
The most commonly used material is sodium
hypochlorite 10-12%.
Treatment instructions:
1. Find out the required dose, treatment frequency and duration. 2. Flush all submains and laterals before starting the
Refer to the chart below: treatment.
3. Dosing and injecting: Use the following formula to
Residual free chlorine determine injection rate and stock solution concentration:
Application concentration (ppm) Treatment Duration
method At point of At end frequency (hr)
(System discharge m3/h) X (chlorine concentration PPM at injection point)
injection of lateral ------------------------------------------------------------------- = (Injector
Through all the (Concentration of the stock solution %) X (10) discharge l/h)
Every irrigation time or at
Continuous 3-5 1.0
irrigation the last hour of the
irrigation If the injector can be manipulated to inject at different
Whenever discharge levels, you may do so, according to your
needed, requirements. If not, you can adapt the stock solution
Intermittent 5-10 1.0 1.0 hour
according to
water quality concentration.
Adapting the stock solution concentration to a fixed
Water at pH above 7.5 reduce the chlorination injection rate:
effectiveness. Acidified to a pH of 6.5 will maximize the Example:
effectiveness of the chlorine treatment • System discharge (of the treated sector) = 30 m3/h
Contact Time: • Chlorine concentration required at injection point = 10 PPM
A minimum contact time of 30 min. is required for • Chlorine quantity required: 10ppm*30 m3/hr/10%/10= 3.0 liter
the effective chlorine treatment in order to kill the • Injector discharge = 200 l/h
microorganism. This time is measured from the • Solution preparation: Mix the 3.0 liter with 197 liter
moment you detect free chlorine in the emitters. of water. This volume will be injected now in 1.0 hr at
10ppm of chlorine
Concentration of free chlorine:
Measure active free chlorine concentration (residual
Warning:
chlorine), using a color comparison set .This is the
Active Chlorine is dangerous. Follow the manufacture
same set that is used to monitor the chlorine level in
instruction.
swimming pools. The residual chlorine concentration
Storage:
depends on the water chlorine demand.
Sodium hypochlorite should be stored under a shaded
area in a clean dark tank ,without any fertilizers residues.
Concentration will degrade over time.
47
© NAANDANJAIN Ltd. 09/2014 P112021
© 2014 NaanDanJain Ltd. All rights reserved.
All specifications are subject to change without notice.
NaanDanJain Irrigation Ltd.

Post Naan 7682900, Israel. T:+972-8-9442180, F:+972-8-9442190
E: mkt@naandanjain.com www.naandanjain.com

NDJ Drip Eng 160914

Uploaded by

Copyright:

Available Formats

NDJ Drip Eng 160914

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NDJ Drip Eng 160914

Uploaded by

Copyright:

Available Formats

DRIP IRRIGATION

NaanDanJain's dripline technologies provide efficient, flexible

Online button drippers

The Cascade Labyrinth

AmnonDrip PC, CNL & PC AS

SPECIAL MODELS • CNL: Opening pressure - 1 bar

AmnonDrip PC, CNL & PC AS BOTTOM VIEW

16 0.90 400 320 640 720

16 1.00 400 320 640 720

17 0.63 600 320 640 720

17 0.90 400 320 640 720

17 1.00 400 320 640 720

20 0.90 300 320 640 720

20 1.00 300 320 640 720

23 1.00 300 320 640 720

16 1.00 500 150 320 360

16 1.15 500 150 320 360

17 0.90 500 150 320 360

17 1.00 500 150 320 360

17 1.20 500 150 320 360

20 1.00 300 150 345 365

20 1.20 300 150 345 365

* Dripper spacing can affect coil length.

Available also in brown, white, purple or any other color for a

AmnonDrip 17mm - W.T 0.63mm

AmnonDrip 17mm - W.T 0.9-1.2mm

APPLICATIONS TopDrip PC TopDrip PC AS

Weir design prevents root

Cascade labyrinth, wide

• Recommended filtration: 130 micron (120 mesh)

TOPDRIP PACKAGING AND SHIPPING

16 1.00 400 320 640 720

17 0.63 600 320 640 720

17 0.90 400 320 640 720

17 1.00 400 320 640 720

20 0.90 300 320 640 720

20 1.00 300 320 640 720

16 1.00 500 150 320 360

16 1.15 500 150 320 360

17 0.90 500 150 320 360

17 1.00 500 150 320 360

17 1.20 500 150 320 360

20 1.00 300 150 345 365

20 1.20 300 150 345 365

* Dripper spacing can affect coil length.

20 0.2 0.1 20 20 0.1

STRUCTURE AND FEATURES

g Recommended working range

Double filter inlet

© NAANDANJAIN Ltd. 09/2014

NaanPC 20/3.8 3.8 l/h, W.T 1.00-1.20mm ID 17.7mm

140 18.8 11.0 7.2 5.0 2.3

16mm 13 1250 16 320 640 720

* Dripper spacing can affect coil length.

Dripper spacing (cm) Dripper spacing (cm) Dripper spacing (cm)

Dripper spacing (cm) Dripper spacing (cm) Dripper spacing (cm)

20 0.1 20 0.1 20 0.1

380 10.3 380 11.4 380 12.3

1.6 l/h 3.5 l/h

TECHNICAL DATA PACKAGING AND SHIPPING