Motherboard

PRIME A520M-K
 E16800
First Edition
June 2020

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.
1F., No.15, Lide Rd.,
Beitou Dist., Taipei City 112
Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).

ii
Contents
Safety information....................................................................................................... iv
About this guide........................................................................................................... v
Package contents........................................................................................................ vi
PRIME A520M-K specifications summary................................................................ vi

Chapter 1 Product Introduction

1.1 Before you proceed....................................................................................... 1-1
1.2 Motherboard overview.................................................................................. 1-1
1.3 Central Processing Unit (CPU)..................................................................... 1-7
1.4 System memory............................................................................................. 1-8

Chapter 2 BIOS and RAID Support

2.1 Knowing BIOS................................................................................................ 2-1
2.2 BIOS Setup program..................................................................................... 2-2
2.3 ASUS EZ Flash 3............................................................................................ 2-3
2.4 ASUS CrashFree BIOS 3............................................................................... 2-4
2.5 RAID configurations...................................................................................... 2-5

Appendix
Notices...................................................................................................................... A-1
ASUS contact information....................................................................................... A-6

iii
 Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.

Operation safety
• Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
• Before using the product, ensure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
• Your motherboard should only be used in environments with ambient temperatures
between 0°C and 40°C.

iv
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.

How this guide is organized

This guide contains the following parts:
• Chapter 1: Product Introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
• Chapter 2: BIOS and RAID Support
This chapter tells how to boot into the BIOS, upgrade BIOS using the EZ Flash Utility
and support on RAID.

Where to find more information

Refer to the following sources for additional information and for product and software
updates.
1. ASUS website
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.

CAUTION: Information to prevent damage to the components and injuries to

yourself when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

v
 Package contents
Check your motherboard package for the following items.

Motherboard 1 x PRIME A520M-K motherboard

Cables 2 x SATA 6Gb/s cables

1 x I/O Shield
Miscellaneous
1 x M.2 SSD screw package

Application DVD 1 x Support DVD

Documentation 1 x User manual

If any of the above items is damaged or missing, contact your retailer.

PRIME A520M-K specifications summary

AMD Socket AM4 for 3rd Gen AMD Ryzen™ and 3rd Gen AMD Ryzen™
CPU with Radeon™ Graphics Processors*
*Refer to www.asus.com for CPU support list.
Chipset AMD A520 Chipset
2 x DIMM, Max. 64GB, DDR4 4600(O.C.)/4400(O.C.)/4000(O
.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3333(O
.C.)/3200/3000/2800/2666/2400/2133 MHz, Un-buffered Memory*
Memory
Dual Channel Memory Architecture
*ECC Memory (ECC mode) support varies by CPU.
**Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
1 x D-Sub
Graphics
1 x HDMITM 2.1(4K@60HZ)
3rd Gen AMD Ryzen™ and 3rd Gen AMD Ryzen™ with Radeon™
Graphics Processors
Expansion Slots 1 x PCIe 3.0 x16 slot (supports x16 mode)
AMD A520 Chipset
2 x PCIe 3.0 x1 slots
Total supports 1 x M.2 slot and 4 x SATA 6Gb/s ports
3rd Gen AMD Ryzen™ and 3rd Gen AMD Ryzen™ with Radeon™
Graphics Processors
M.2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 & SATA
Storage modes)
AMD A520 Chipset
4 x SATA 6Gb/s ports
Support RAID 0, 1, 10
Ethernet 1 x Realtek RTL8111H 1Gb Ethernet
Rear USB (Total 6 ports)
4 x USB 3.2 Gen 1 ports (4 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
USB
Front USB (Total 6 ports)
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports

(continued on the next page)

vi
PRIME A520M-K specifications summary
Realtek ALC887 7.1 Surround Sound High Definition Audio CODEC*
- Supports Jack detection, Multi-streaming, Front Panel Jack-retasking
- Supports up to 24-Bit/192 kHz playback
Audio Audio Features
- Audio Shielding
- Dedicated audio PCB layers
*A chassis with an HD audio module in the front panel is required to support 7.1
Surround Sound audio output.
4 x USB 3.2 Gen 1 ports (4 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
1 x D-Sub port
Back Panel I/O Ports 1 x HDMITM port
1 x Realtek RTL8111H 1Gb Ethernet port
3 x Audio jacks
1 x PS/2 Keyboard/Mouse combo port
Fan and cooling related
1 x 4-pin CPU Fan header
1 x 4-pin Chassis Fan header
Power related
1 x 24-pin Main Power connector
1 x 8-pin +12V Power connector
Storage related
1 x M.2 slot (Key M)
4 x SATA 6Gb/s ports
Internal I/O USB
Connectors 1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Miscellaneous
1 x Clear CMOS header
1 x COM Port header
1 x Front Panel Audio header (AAFP)
1 x S/PDIF Out header
1 x Speaker header
1 x SPI TPM header (14-1pin)
1 x 10-1 pin System Panel header

(continued on the next page)

vii
 PRIME A520M-K specifications summary
ASUS 5X PROTECTION III
- ASUS DIGI+ VRM
- ASUS LANGuard
- ASUS Overvoltage Protection
- ASUS SafeSlot Core
Special Features - ASUS Stainless-Steel Back I/O
ASUS Q-Design
- ASUS Q-DIMM
- ASUS Q-Slot
ASUS Thermal Solution
- Aluminum heatsink design
ASUS Exclusive Software
Armoury Crate
AI Suite 3
- Performance and Power Saving Utility
TurboV EVO
EPU
DIGI+ VRM
Fan Xpert
- EZ update
Software Features ASUS CPU-Z
AI Charger
DAEMON Tools
Norton Anti-virus software (Free Trial for 60 days)
WinRAR
UEFI BIOS
ASUS EZ DIY
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
- ASUS UEFI BIOS EZ Mode
BIOS 256 Mb Flash ROM, UEFI AMI BIOS
Manageability WOL by PME, PXE
Operating System Windows 10 - 64 bit
mATX Form Factor
Form Factor
8.9 inch x 8.7 inch (22.6 cm x 22.1 cm)

S
 pecifications are subject to change without notice. Refer to the ASUS website for the
latest specifications.

viii
Product Introduction

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change
1
any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.

1.2 Motherboard overview

5 4 15 1 4 2

22.1cm(8.7in)

KBMS
_U32G1_56
EATX12V DIGI+
VRM

CPU_FAN

VGA
DDR4 DIMM_A1* (64bit, 288-pin module)

DDR4 DIMM_B1* (64bit, 288-pin module)

Place this HDMI

side towards
SOCKET AM4

the rear of the

EATXPWR

chassis USB56
5
22.6cm(8.9in)

LAN_U32G1_34 BATTERY
U32G1_12

8
CHA_FAN

256Mb
BIOS

AUDIO TPM

PCIEX16

Realtek
8111H 6
M.2(SOCKET3)

PCIEX1_1
3 AMD
ALC
887 2280 2260 2242 A520
PCIEX1_2 Super
I/O SPEAKER
SATA6G_1 SATA6G_2
SATA6G_3 SATA6G_4
SPDIF_OUT COM COM_DEBUG USB12 USB34

AAFP CLRTC F_PANEL

12 13 11 14 9 10 16 7

Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.

ASUS PRIME A520M-K 1-1

 1.2.1 Layout contents
1. CPU socket
The motherboard comes with an AMD Socket AM4 designed for 3rd Gen AMD Ryzen™ and
3rd Gen AMD Ryzen™ with Radeon™ Graphics Processors.

For more details, refer to Central Processing Unit (CPU).

2. DDR4 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.

For more details, refer to System memory.

3. Expansion slots
This motherboard supports one PCIe x16 graphics card and two PCIe 3.0 x1 network cards,
SCSI cards and other cards that comply with the PCI Express specification.

FAN PWM
FAN PWR
4. Fan headers

FAN IN
GND
FAN PWM
The Fan headers allow you to connect fans to cool the system. FAN IN
FAN PWR
GND

5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.

Ensure to connect the 8-pin power plug.

• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350W.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.

6. M.2 Slot (Key M)

The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.

For 3rd Gen AMD Ryzen™ and 3rd Gen AMD Ryzen™ with Radeon™ Graphics Processors,
M.2 slot supports PCIe 3.0 x4 & SATA mode Key M and type 2242/2260/2280 storage
devices.

7. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via a SATA cable.

1-2 Chapter 1: Product Introduction

 PIN 1
8. USB 3.2 Gen 1 header USB3+5V
USB3+5V
IntA_P1_SSRX-
IntA_P2_SSRX- IntA_P1_SSRX+

The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 IntA_P2_SSRX+
GND
IntA_P2_SSTX-
GND
IntA_P1_SSTX-
IntA_P1_SSTX+

module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header IntA_P2_SSTX+
GND
GND
IntA_P1_D-
IntA_P2_D- IntA_P1_D+
provides data transfer speeds of up to 5 Gb/s. IntA_P2_D+ GND

The USB 3.2 Gen 1 module is purchased separately.

9. USB 2.0 headers

USB_P1+
USB_P1-
USB+5V
The USB 2.0 headers allow you to connect USB modules for additional USB

GND
NC
2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480
Mb/s.
PIN 1

USB+5V
USB_P2-
USB_P2+
GND
DO NOT connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!

The USB 2.0 module is purchased separately.

CLRTC
10. Clear CMOS header

+3V_BAT
This header allows you to clear the CMOS RTC RAM data of the system setup

GND
information such as date, time, and system passwords.
To erase the RTC RAM: PIN 1

1. Turn OFF the computer and unplug the power cord.

2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-
enter data.

If the steps above do not help, remove the onboard battery and short the two pins again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

11. COM Port header COM

RXD
DTR
DSR
CTS

This header is for a serial (COM) port. Connect the serial port module cable to
this header, then install the module to a slot opening at the back of the system
chassis. PIN 1
DCD
TXD
GND
RTS
RI

12. Front Panel Audio header

This header is for a chassis-mounted front panel audio I/O module that
SENSE1_RETUR

SENSE2_RETUR

supports HD audio standard. Connect one end of the front panel audio
I/O module cable to this header.
AGND
NC

• We recommend that you connect a high-definition front panel

audio module to this header to avail of the motherboard’s high- AAFP
definition audio capability.
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L

• If you want to connect a high-definition front panel audio

module to this header, set the Front Panel Type item in the
BIOS setup to [HD Audio]. By default, this header is set to [HD HD-audio-compliant
pin definition
Audio].

ASUS PRIME A520M-K 1-3

 13. S/PDIF Out header

SPDIFOUT
This header is for an additional Sony/Philips Digital Interface (S/PDIF) port.

GND
Connect the S/PDIF Out module cable to this header, then install the module to

+5V
a slot opening at the back of the system chassis.
SPDIF_OUT
14. Speaker header
SPEAKER
The 4-pin header is for the chassis-mounted system warning speaker. The

Speaker Out
speaker allows you to hear system beeps and warnings.

GND
GND
+5V
PIN 1

15. SPI TPM header

This header supports a Trusted Platform Module (TPM) system with a Serial

F_SPI_HOLD#_R

F2_SPI_CS1#_R
F_SPI_CS0#_R
T_SPI_MISO

S_PLTRST#
Peripheral Interface (SPI), allowing you to securely store keys, digital

+3V_SPI

VCCSPI
certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity. TPM
PIN 1

T_SPI_MOSI
T_SPI_CLK
GND
F_BIOS_WP#_R
S_SPI_TPM_CS2#
S_SPI_TPM_IRQ#
16. 10-1 pin System Panel header
F_PANEL
This header supports several chassis-mounted functions. +PWR_LED- PWR_BTN

• System power LED (2-pin +PWR_LED-)

PWR_LED+
PWR_LED-
PWR
This 2-pin header is for the system power LED. Connect the chassis

GND
power LED cable to this header. The system power LED lights up when PIN 1

you turn on the system power, and blinks when the system is in sleep
HDD_LED+
HDD_LED-
Ground
HWRST#
(NC)
mode.
+HDD_LED- RESET

• Hard disk drive activity LED (2-pin +HDD_LED-)

This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED cable to
this header. The HDD LED lights up or flashes when data is read from or written to the
HDD.
• Power button/Soft-off button (2-pin PWR_BTN)
This header is for the system power button.
• Reset button (2-pin RESET)
This 2-pin header is for the chassis-mounted reset button for system reboot without
turning off the system power.

1-4 Chapter 1: Product Introduction

1.2.2 Rear panel connectors
1 2 3 4 5

6 7 8 6 9

1. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard or mouse.
2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.

3. Ethernet port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the Ethernet port LED indications.

Ethernet port LED indications

Activity Link Speed
Activity/Link LED Speed LED LED LED
Status Description Status Description
Off No link Off 10Mbps connection
Orange Linked Orange 100Mbps connection
Orange (Blinking) Data activity Green 1Gbps connection
Orange (Blinking Ready to wake Ethernet port
then steady) up from S5 mode

4. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio
sources.
5. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
6. USB 3.2 Gen 1 (up to 5Gbps) ports. These 9-pin Universal Serial Bus (USB) ports
connect to USB 3.2 Gen 1 devices.
7. HDMITM port. This port is for a High-Definition Multimedia Interface (HDMITM)
connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other
protected content.
8. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices.

ASUS PRIME A520M-K 1-5

 9. Microphone port (pink). This port connects a microphone.

Refer to the audio configuration table for the function of the audio ports in 2, 4, 5.1, or
7.1-channel configuration.

Audio 2, 4, 5.1 or 7.1-channel configuration

Headset
Port 4-channel 5.1-channel 7.1-channel
2-channel
Light Blue
Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
(Rear panel)
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) — — — Side Speaker Out

To configure a 7.1-channel audio output:

A chassis with an HD audio module in the front panel is required to support 7.1-channel
audio output.

1-6 Chapter 1: Product Introduction

1.3 Central Processing Unit (CPU)
The motherboard comes with an AMD Socket AM4 designed for
3rd Gen AMD Ryzen™ and 3rd Gen AMD Ryzen™ with Radeon™
Graphics Processors.

Unplug all power cables before installing the CPU.

The AM4 socket has a different pinout design. Ensure that you use a CPU designed for the
AM4 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!

Installing the CPU

2
1

3 4

Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the
heatsink and fan if necessary.

ASUS PRIME A520M-K 1-7

 1.4 System memory
This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module
(DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:

Channel Sockets
DIMM_A1*
Channel A DIMM_A1*
DIMM_B1*
Channel B DIMM_B1*

• You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
• Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
• A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module.
DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

• The default memory operation frequency is dependent on its Serial Presence

Detect(SPD), which is the standard way of accessing information from a memory
module. Under the default state, some memory modules for overclocking may operate
at a lower frequency than the vendor-marked value.
• For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs).
• Refer to www.asus.com for the latest Memory QVL (Qualified Vendors Lists).

Recommended memory configuration

DIMM_A1* DIMM_A1*
DIMM_B1*
DIMM_B1*

1-8 Chapter 1: Product Introduction

Installing a DIMM
1 2 A
A

To remove a DIMM
A
B

ASUS PRIME A520M-K 1-9

1-10 Chapter 1: Product Introduction
BIOS and RAID Support
2
2.1 Knowing BIOS
The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI
architecture, offering a user-friendly interface that goes beyond the traditional keyboard-
only BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
• An error message appears on the screen during the system bootup and requests you
to run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or
update.

Inappropriate BIOS settings may result to instability or boot failure. We strongly

recommend that you change the BIOS settings only with the help of a trained service
personnel.

• When downloading or updating the BIOS file, rename it as PA520MK.CAP for this
motherboard.

• BIOS settings and options may vary due to different BIOS release versions. Please
refer to the latest BIOS version for settings and options.

For more information on BIOS configurations, please refer to

https://www.asus.com/support, or download the BIOS manual
by scanning the QR code.

ASUS PRIME A520M-K 2-1

 2.2 BIOS Setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screens
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.

Entering BIOS at startup

To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test
(POST). If you do not press <Delete> or <F2>, POST continues with its routines.

Entering BIOS Setup after POST

To enter BIOS Setup after POST:
• Press <Ctrl>+<Alt>+<Delete> simultaneously.
• Press the reset button on the system chassis.
• Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
After doing either of the three options, press <Delete> key to enter BIOS.

• Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS Setup program.

• If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>.

• If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value.

• The BIOS Setup program does not support Bluetooth devices.

BIOS menu screen

The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.

2-2 Chapter 2: BIOS and RAID Support

2.3 ASUS EZ Flash 3
The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based
utility.

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu or press hotkey <F5>.

To update the BIOS by USB:

• This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!

1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash 3 Utility and press <Enter>.
3. Select via Storage Device(s).
4. Press <Tab> to switch to the Drive field.
5. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
6. Press <Tab> to switch to the Folder field.
7. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform
the BIOS update process. Reboot the system when the update process is done.

ASUS PRIME A520M-K 2-3

 2.4 ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using a USB flash drive that contains the BIOS file.

If you want to use the latest BIOS file, download the file at https://www.asus.com/support,
and save it to a USB flash drive.

Recovering the BIOS

To recover the BIOS:
1. Turn on the system.
2. Insert the USB flash drive containing the BIOS file to the USB port.
3. The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 3 automatically.
4. The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!

2-4 Chapter 2: BIOS and RAID Support

2.5 RAID configurations
The motherboard supports RAID 0, RAID 1, and RAID 10 configuration.

For more information on configuring your RAID sets, please

refer to the RAID Configuration Guide which you can find at
https://www.asus.com/support, or by scanning the QR code.

RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.

ASUS PRIME A520M-K 2-5

2-6 Chapter 2: BIOS and RAID Support
Appendix
Notices
FCC Compliance Information
Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.

ASUS PRIME A520M-K A-1

 Compliance Statement of Innovation, Science and Economic
Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)

Déclaration de conformité de Innovation, Sciences et

Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
CAN ICES-3(B)/NMB-3(B)

VCCI: Japan Compliance Statement

Class B ITE

KC: Korea Warning Statement

A-2 Appendices
Google™ License Terms
Copyright© 2020 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
License.

Declaration of compliance for product environmental

regulation
ASUS follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASUS product is in line with global
environmental regulations. In addition, ASUS disclose the relevant information based on
regulation requirements.
Please refer to http://csr.asus.com/Compliance.htm for information disclosure based on
regulation requirements ASUS is complied with:

EU REACH and Article 33

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.

EU RoHS
This product complies with the EU RoHS Directive. For more details, see
http://csr.asus.com/english/article.aspx?id=35

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits
use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and
polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in
homogenous materials and 0.01% by weight in homogenous materials for cadmium, except
for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of
the Vietnam Circular 30/2011/TT-BCT.
Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng
các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.

Turkey RoHS
AEEE Yönetmeliğine Uygundur

ASUS PRIME A520M-K A-3

 ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.

DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.

Regional notice for California

WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

A-4 Appendices
English ASUSTeK Computer Inc. hereby declares that this device is in Română ASUSTeK Computer Inc. declară că acest dispozitiv se conformează
compliance with the essential requirements and other relevant provisions of cerinţelor esenţiale şi altor prevederi relevante ale directivelor conexe. Textul
related Directives. Full text of EU declaration of conformity is available at: complet al declaraţiei de conformitate a Uniunii Europene se găseşte la:
www.asus.com/support www.asus.com/support
Français AsusTek Computer Inc. déclare par la présente que cet appareil est Srpski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti
conforme aux critères essentiels et autres clauses pertinentes des directives sa osnovnim zahtevima i drugim relevantnim odredbama povezanih Direktiva.
concernées. La déclaration de conformité de l’UE peut être téléchargée à Pun tekst EU deklaracije o usaglašenosti je dostupan da adresi:
partir du site Internet suivant : www.asus.com/support www.asus.com/support
Deutsch ASUSTeK Computer Inc. erklärt hiermit, dass dieses Gerät mit Slovensky Spoločnosť ASUSTeK Computer Inc. týmto vyhlasuje, že toto
den wesentlichen Anforderungen und anderen relevanten Bestimmungen zariadenie vyhovuje základným požiadavkám a ostatým príslušným
der zugehörigen Richtlinien übereinstimmt. Der gesamte Text der EU- ustanoveniam príslušných smerníc. Celý text vyhlásenia o zhode pre štáty EÚ
Konformitätserklärung ist verfügbar unter: www.asus.com/support je dostupný na adrese: www.asus.com/support
Italiano ASUSTeK Computer Inc. con la presente dichiara che questo Slovenščina ASUSTeK Computer Inc. izjavlja, da je ta naprava skladna z
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni bistvenimi zahtevami in drugimi ustreznimi določbami povezanih direktiv.
pertinenti con le direttive correlate. Il testo completo della dichiarazione di Celotno besedilo EU-izjave o skladnosti je na voljo na spletnem mestu:
conformità UE è disponibile all’indirizzo: www.asus.com/support www.asus.com/support
Русский Компания ASUS заявляет, что это устройство соответствует Español Por la presente, ASUSTeK Computer Inc. declara que este dispositivo
основным требованиям и другим соответствующим условиям cumple los requisitos básicos y otras disposiciones pertinentes de las
соответствующих директив. Подробную информацию, пожалуйста, directivas relacionadas. El texto completo de la declaración de la UE de
смотрите на www.asus.com/support conformidad está disponible en: www.asus.com/support
Български С настоящото ASUSTeK Computer Inc. декларира, че това Svenska ASUSTeK Computer Inc. förklarar härmed att denna
устройство е в съответствие със съществените изисквания и другите enhet överensstämmer med de grundläggande kraven och andra
приложими постановления на свързаните директиви. Пълният текст на relevanta föreskrifter i relaterade direktiv. Fulltext av EU-försäkran om
декларацията за съответствие на ЕС е достъпна на адрес: överensstämmelse finns på: www.asus.com/support
www.asus.com/support Українська ASUSTeK Computer Inc. заявляє, що цей пристрій відповідає
Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan основним вимогам та іншим відповідним положенням відповідних
s bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva. Директив. Повний текст декларації відповідності стандартам ЄС доступний
Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support на: www.asus.com/support
Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili
toto zařízení splňuje základní požadavky a další příslušná ustanovení Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder. AB
souvisejících směrnic. Plné znění prohlášení o shodě EU je k dispozici na uygunluk bildiriminin tam metni şu adreste bulunabilir:
adrese: www.asus.com/support www.asus.com/support
Dansk ASUSTeK Computer Inc. erklærer hermed, at denne enhed er i Bosanski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj usklađen
overensstemmelse med hovedkravene og andre relevante bestemmelser i sa bitnim zahtjevima i ostalim odgovarajućim odredbama vezanih direktiva.
de relaterede direktiver. Hele EU-overensstemmelseserklæringen kan findes Cijeli tekst EU izjave o usklađenosti dostupan je na: www.asus.com/support
på: www.asus.com/support
Nederlands ASUSTeK Computer Inc. verklaart hierbij dat dit apparaat
voldoet aan de essentiële vereisten en andere relevante bepalingen van
de verwante richtlijnen. De volledige tekst van de EU-verklaring van
conformiteit is beschikbaar op: www.asus.com/support
Eesti Käesolevaga kinnitab ASUSTeK Computer Inc, et see seade vastab
asjakohaste direktiivide oluliste nõuetele ja teistele asjassepuutuvatele
sätetele. EL vastavusdeklaratsiooni täielik tekst on saadaval järgmisel
aadressil: www.asus.com/support
Suomi ASUSTeK Computer Inc. ilmoittaa täten, että tämä laite on
asiaankuuluvien direktiivien olennaisten vaatimusten ja muiden tätä
koskevien säädösten mukainen. EU-yhdenmukaisuusilmoituksen koko teksti
on luettavissa osoitteessa: www.asus.com/support
Ελληνικά Με το παρόν, η AsusTek Computer Inc. δηλώνει ότι αυτή
η συσκευή συμμορφώνεται με τις θεμελιώδεις απαιτήσεις και άλλες
σχετικές διατάξεις των Οδηγιών της ΕΕ. Το πλήρες κείμενο της δήλωσης
συμβατότητας είναι διαθέσιμο στη διεύθυνση: www.asus.com/support
Magyar Az ASUSTeK Computer Inc. ezennel kijelenti, hogy ez az eszköz
megfelel a kapcsolódó Irányelvek lényeges követelményeinek és egyéb
vonatkozó rendelkezéseinek. Az EU megfelelőségi nyilatkozat teljes szövege
innen letölthető: www.asus.com/support
Latviski ASUSTeK Computer Inc. ar šo paziņo, ka šī ierīce atbilst saistīto
Direktīvu būtiskajām prasībām un citiem citiem saistošajiem nosacījumiem.
Pilns ES atbilstības paziņojuma teksts pieejams šeit: www.asus.com/support
Lietuvių „ASUSTeK Computer Inc.“ šiuo tvirtina, kad šis įrenginys atitinka
pagrindinius reikalavimus ir kitas svarbias susijusių direktyvų nuostatas. Visą
ES atitikties deklaracijos tekstą galima rasti: www.asus.com/support
Norsk ASUSTeK Computer Inc. erklærer herved at denne enheten er i
samsvar med hovedsaklige krav og andre relevante forskrifter i relaterte
direktiver. Fullstendig tekst for EU-samsvarserklæringen finnes på:
www.asus.com/support
Polski Firma ASUSTeK Computer Inc. niniejszym oświadcza, że
urządzenie to jest zgodne z zasadniczymi wymogami i innymi właściwymi
postanowieniami powiązanych dyrektyw. Pełny tekst deklaracji zgodności
UE jest dostępny pod adresem: www.asus.com/support
Português A ASUSTeK Computer Inc. declara que este dispositivo está em
conformidade com os requisitos essenciais e outras disposições relevantes
das Diretivas relacionadas. Texto integral da declaração da UE disponível em:
www.asus.com/support

ASUS PRIME A520M-K A-5

 ASUS contact information

ASUSTeK COMPUTER INC.

Address 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site https://www.asus.com

Technical Support
Telephone +86-21-38429911
Online support https://qr.asus.com/techserv

ASUS COMPUTER INTERNATIONAL (America)

Address 48720 Kato Rd., Fremont, CA 94538, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site https://www.asus.com/us/

Technical Support
Support fax +1-812-284-0883
Telephone +1-812-282-2787
Online support https://qr.asus.com/techserv

ASUS COMPUTER GmbH (Germany and Austria)

Address Harkortstrasse 21-23, 40880 Ratingen, Germany
Web site https://www.asus.com/de
Online contact https://www.asus.com/support/Product/ContactUs/
Services/questionform/?lang=de-de

Technical Support
Telephone (DE) +49-2102-5789557
Telephone (AT) +43-1360-2775461
Online support https://www.asus.com/de/support

A-6 Appendices