Full-Duplex, Point-to-Point

Gigabit Radio
Models: AF-24, AF-24HD, AF-5, AF-5U

High Performance Wireless Backhaul

Extreme, Long-Range Links

Worldwide License-Free Operation

 Revolutionary Wireless Designed for Freedom
Technology airFiber operates in worldwide, license-free, 24 or 5 GHz frequencies. Anyone
Introducing airFiber®, a truly around the world can purchase and operate airFiber without any special permits,
revolutionary Point-to-Point wireless paperwork, or added licensing costs. Users are free to locate, deploy, and operate
platform from Ubiquiti Networks. airFiber practically anywhere they choose (subject to local country regulations).
Housed in a compact, highly efficient
form factor, airFiber delivers amazing Model Description Operating Frequency*
ASHET A

wireless gigabit+ performance, low

AF-5 Mid-band 5 GHz frequencies 5470 - 5950 MHz
D

latency, and long range. airFiber

ushers in a new era in price-disruptive AF-5U High-band 5 GHz frequencies 5725 - 6200 MHz
wireless technology ideal for carrier AF-24/AF‑24HD 24 GHz frequencies 24.05 - 24.25 GHz
backhaul, building-to-building
enterprise use, or public safety FiOS
* Refer to the Specifications section for more information.
applications.
Built for Speed and Range
Cable

Efficient by Design airFiberDSLdelivers gigabit performance at 1.2+ Gbps for airFiber AF-5/AF-5U,
1.5+ Gbps for airFiber AF-24, and 2 Gbps for airFiber AF-24HD. To put this in
Every detail of airFiber was designed perspective, airFiber can transmit a 100 MB file in less than a second. Rivaling
and engineered by the Ubiquiti 0
common broadband100 200 300 400 500
providers,600 700 800
airFiber 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
download speed is up to 100x faster. With
R&D Team. From the silicon chip speed and throughput surpassing conventional
Speed wired backhauls, airFiber prevails
Comparison (Mbps)
up to the innovative split-antenna over expensive and labor-intensive wired infrastructures.
architecture, the Ubiquiti R&D Team
created airFiber to deliver superior
throughput with efficiency. airFiber
was purpose‑built to create a high
performance backhaul.

Plug and Play Deployment

Based on Ubiquiti’s innovative
and intuitive airOS®, the airFiber FiOS

Configuration Interface enables

quick deployment. With installation Cable

efficiency in mind, the mechanical DSL

design allows easy installation by one
person. A two‑person installation crew 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
can effectively install and align an
airFiber link. Speed Comparison (Mbps)

To fine-tune the alignment, the

received signal levels can be airFiber is built for long-range use: up to 13+ km for airFiber AF-24, up to 20+ km
conveniently accessed via any of these for airFiber AF-24HD, and up to 100+ km for airFiber AF-5/AF-5U, which launches
methods: the innovative xtreme Range Technology (xRT™) feature.
• airFiber LED display
airFiber backhauls do not share the security risks associated
• airFiber Configuration Interface
with wired backhauls. The long distances of wired backhauls
• Audio tone feature are vulnerable to copper theft, fiber optic damage,
vandalism, and accidental breakage. With airFiber, only the
installation points of the airFiber links need to be secured.

2
Innovative Proprietary Modem Technology
Ubiquiti’s innovative proprietary modem technology was purpose-built to
address the specific challenges of outdoor, PtP (Point‑to-Point) bridging and
high-performance network backhauls. Every aspect of the radio has been carefully
simulated and designed to optimize range, speed, and latency performance in the
harshest RF noise environments.

Synchronous Data Transmission and Reception

Conventional wireless standards impose a latency by having to receive a packet
before a packet is transmitted. airFiber can transmit data synchronously without
any wait time. airFiber features traditional TDD and FDD modes of operation
in addition to the proprietary Hybrid Division Duplexing (HDD) mode, which
provides a breakthrough in range and spectral efficiency performance.

Based on the ranging algorithm built into the air protocol, the airFiber radios
use patent-pending HDD technology to calculate the propagation delay and
know when each radio can transmit and receive, so they send packets in precise
synchronization. Packet transmission latency is virtually eliminated.

RX RX

yA Freq
uenc uency
Freq B

TX TX airFiber AF-5/AF-5U

airFiber AF-5/AF-5U Radios in Full-Duplex Mode

Innovative Dual-Antenna Architecture

airFiber features a dual-independent, 2x2 MIMO, high-gain reflector antenna
system. Separate yet integrated transmit (TX) and receive (RX) antennas help
extend link budgets by eliminating the extra RF losses caused by the switches or
duplexers required in systems with common TX/RX antennas.

Network Management
airFiber supports a variety of features to help you manage your network:
• Network management options A choice between the greater security of
out‑of-band management and the convenience of in-band management.
• SNMP support Full SNMP support to aid in network management.
• Local and remote airFiber status information Available on the Main tab of
the airFiber Configuration Interface.

airFiber AF-24 shown without radome

3
 There are two airFiber models available for the 5 GHz The high-band (5.7 - 6.2 GHz) model, AF-5U, has robust
spectrum. The mid-band model, AF-5, features the popular filtering to enable co-location with devices operating in
mid‑band frequencies, which are freely used in many parts the lower 5 GHz bands while allowing operation at a higher
of the world. output power in many areas of the world.

Side Back

4
Superior Processing Radio Alignment Display
Ubiquiti Networks introduces our proprietary INVICTUS™ core communications Newly designed for the airFiber
processing engine. The speed, power, and efficiency of this integrated circuit AF-5/AF-5U, the Radio Alignment
enhances the performance of the airFiber AF-5/AF-5U. Display (RAD) makes aiming quicker
and easier. The dual, calibrated signal
Efficient Use of 5 GHz Band strength indicators display the actual
signal strength on the local and
airFiber AF-5/AF-5U features 1 MHz center channel resolution with market‑leading

D ATASHEET
remote airFiber radios in real time. The
Power Envelope Tracking technology. The airFiber AF-5/AF-5U accurately and comprehensive array of radio status
continuously controls transmit power relative to the band edge. The power level indicators display the following:
automatically tracks to optimize performance near band edges, allowing you to
choose the part of the band with the least interference. • GPS synchronization status
• Master/slave mode
Long-Range Links • RF link status
Newly developed for the airFiber AF-5/AF-5U, the patent-pending xRT feature • RF overload warning
uses an innovative, adaptive multi-channel coding scheme to enhance radio • Current modulation mode
transceiver performance, thereby maximizing your link budget and spectrum
utilization – while still maintaining regulatory compliance. This results in links that • Link activity and speed for wired
can span distances from 10 m up to 100+ km. management and data ports

Quick and Easy Installation GPS

MASTER
OVERLOAD

LINK REMOTE 8X

The unique sliding-clamp design of the airFiber AF-5/AF-5U allows mounting RESET
6X
4X to 0.25X
hardware to be pre‑assembled prior to installation – no more dropped screws at MANAGEMENT LOCAL AUX DATA

the top of the tower. As an added convenience, the drop‑in cradle mount design ACT SPEED ACT SPEED

allows the installer to attach mounting hardware to the pole without having to
support the weight of the airFiber radio during installation.

5
 Specifications
airFiber AF-5/AF-5U
Dimensions
Radio 938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08")
Box 1042 x 573 x 502 mm (41.02 x 22.56 x 19.76")
Weight
Radio (Mount Included) 16 kg (35.27 lb)
Box 26.5 kg (58.42 lb)
Max. Power Consumption 40W
Power Supply 50V, 1.2A PoE GigE Adapter (Included)
Power Method Passive Power over Ethernet
Supported Voltage Range +42 to +58VDC, -48VDC
Automatic Transmit Power Control (ATPC) Yes
Certifications CE, FCC, IC
Mounting Pole Mount Kit (Included)
Wind Loading 863 N @ 200 km/hr (194 lbf @ 125 mph)
Wind Survivability 200 km/hr (125 mph)
Operating Temperature -40 to 55° C (-40 to 131°F)
LEDs (12) Status LEDs:
Data Port Link/Activity
Data Port Speed
Management Port Link/Activity
Management Port Speed
GPS Synchronization
Master/Slave
Link Status
Modulation Mode 0.25x to 4x, 6x, 8x, 10x (Unlabeled), Overload
Remote and Local Displays (Calibrated Signal Strength)
Operating Frequency
AF-5
FCC 15.247, 15.407, IC RSS-210 5470 - 5600 MHz, 5650 - 5850 MHz
ETSI EN 301 893, EN 302 502 5470 - 5875 MHz
Other Regions 5470 - 5950 MHz
AF-5U
FCC 15.247, IC RSS-210 5725 - 5850 MHz
ETSI EN 302 502 5725 - 5875 MHz
Other Regions 5725 - 6200 MHz
Interface
Data Port (1) 10/100/1000 Ethernet Port
Management Port (1) 10/100 Ethernet Port
Auxiliary Port (1) RJ-12, Alignment Tone Port
System
Maximum Throughput 1.2+ Gbps
Maximum Range 100+ km (Dependent on Regulatory Region)
Packets per Second 1+ Million
Encryption 128-Bit AES
Uplink/Downlink Ratio 50% Fixed
Latency
Full Duplex Mode < 200 µs at Full Throughput
Half Duplex Mode < 2 ms at Full Throughput
Radio Frame Synchronization GPS
Dynamic Frequency Selection
AF-5 CE, FCC/IC
AF-5U CE (FCC/IC Not Applicable)
MTU (Maximum Transmission Unit) Up to 9600
6
 airFiber AF-5/AF-5U Suggested Max. TX Power

10x 39 dBm

8x 43 dBm

6x 45 dBm

4x and below 47 dBm

airFiber AF-5/AF-5U Receive Sensitivity

Sensitivity Sensitivity Sensitivity Sensitivity Sensitivity FDD TDD
Rate Modulation
(10 MHz) (20 MHz) (30 MHz) (40 MHz) (50 MHz) Capacity* Capacity*
10x 1024QAM -63 dBm -60 dBm -59 dBm -58 dBm -57 dBm 1280 Mbps 640 Mbps

8x 256QAM -70 dBm -67 dBm -66 dBm -65 dBm -64 dBm 1024 Mbps 512 Mbps

6x 64QAM -77 dBm -74 dBm -73 dBm -72 dBm -71 dBm 768 Mbps 384 Mbps

4x 16QAM MIMO -84 dBm -81 dBm -80 dBm -79 dBm -78 dBm 512 Mbps 256 Mbps

2x QPSK MIMO -90 dBm -87 dBm -86 dBm -85 dBm -84 dBm 256 Mbps 128 Mbps

1x ½ Rate QPSK xRT -93 dBm -90 dBm -89 dBm -88 dBm -87 dBm 128 Mbps 64 Mbps

¼x ¼x QPSK xRT -95 dBm -93 dBm -93 dBm -92 dBm -91 dBm 32 Mbps 16 Mbps

* FDD = (2) 50 MHz channels and TDD = (1) 50 MHz channel

airFiber AF-5/AF-5U Radio Frequency

GPS GPS Clock Synchronization
Transceiver
EIRP ~50 dBm (Dependent on Regulatory Region and Frequency Band)
Frequency Accuracy ±2.5 ppm without GPS Synchronization
±0.2 ppm with GPS Synchronization
Channel Bandwidth 10/20/30/40/50 MHz
Modulation 1024QAM MIMO
256QAM MIMO
64QAM MIMO
16QAM MIMO
QPSK MIMO
½ Rate QPSK xRT
¼ Rate QPSK xRT
Integrated Split Antenna
TX Gain 23 dBi
RX Gain 23 dBi
Beamwidth 6°
Front-to-Back Ratio 70 dB
Polarity Dual-Slant Polarization
Cross-Polarity Isolation > 28 dB

7
 airFiber AF-5/AF-5U Capacity (Mbps)
Channel Width (MHz)
Rate Modulation 10 20 30 40 50

10x 1024 QAM MIMO 256.0 512.0 768.0 1024.0 1280.0

8x 256 QAM MIMO 204.8 409.6 614.4 819.2 1024.0

6x 64 QAM MIMO 153.6 307.2 460.8 614.4 768.0

4x 16 QAM MIMO 102.4 204.8 307.2 409.6 512.0

2x QPSK MIMO 51.2 102.4 153.6 204.8 256.0

1x ½ Rate QPSK xRT 25.6 51.2 76.8 102.4 128.0

¼x ¼ Rate QPSK xRT 6.4 12.8 19.2 25.6 32.0

8
Superior 24 GHz Performance Two airFiber 24 GHz Models
airFiber AF-24/AF-24HD provides a breakthrough in 24 GHz Two models deliver superior speed with spectral efficiency
backhaul performance. in the worldwide, license-free, 24 GHz radio band.

Systems for millimeter‑wave frequencies typically experience The standard model, AF-24, delivers up to 1.5+ Gbps
RF losses when part of the RF is lost in the switches and throughput at a range of up to 13+ km.
filters.
The heavy-duty model, AF-24HD, provides more throughput
The Ubiquiti R&D team eliminated such RF losses with at up to 2 Gbps and increased range of up to 20+ km. It also
separate yet integrated TX and RX antennas, so the link includes a more rugged exterior with a metal reflector, to
budget is robust and the airFiber AF-24/AF-24HD has better protect against nature’s harshest elements.
noise figure and higher transmit power efficiency.

Side Back

9
 Specifications
airFiber AF-24
Operating Frequency 24.05 – 24.25 GHz*
Dimensions
Radio 649 x 426 x 303 mm (25.55 x 16.77 x 11.93")
Box 725 x 520 x 410 mm (28.54 x 20.47 x 16.14")
Weight
Radio (Mount Included) 10.5 kg (23.15 lb)
Box 17 kg (37.48 lb)
Max. Power Consumption 50W
Power Supply 50V, 1.2A PoE GigE Adapter (Included)
Power Method Passive Power over Ethernet
Supported Voltage Range +42 to +58VDC, -48VDC
Certifications CE, FCC, IC
Wind Loading 480 N @ 200 km/hr (108 lbf @ 125 mph)
Wind Survivability 200 km/hr (125 mph)
Mounting Pole Mount Kit (Included)
Operating Temperature -40 to 55° C (-40 to 131° F)
LEDs (8) Status LEDs:
Data Port Speed
Data Port Link/Activity
Configuration Port Speed
Configuration Port Link/Activity
GPS Synchronization
Modulation Mode
Master/Slave
RF Status
(1) Two-Digit LED Display Calibrated in dBm
Interface
Data Port (1) 10/100/1000 Ethernet Port
Configuration Port (1) 10/100 Ethernet Port
Auxiliary Port (1) RJ-12, Alignment Tone Port
System
Maximum Throughput 1.5+ Gbps
Maximum Range 13+ km
Packets per Second > 1 Million
Encryption 128-Bit AES
Uplink/Downlink Ratio 50% Fixed
Latency
Full Duplex Mode < 200 µs at Full Throughput
Half Duplex Mode < 2 ms at Full Throughput
MTU (Maximum Transmission Unit) Up to 9600
* Two 100 MHz channels are available:: 24.1 GHz (24.05-24.15 GHz) and 24.2 GHz (24.15-24.25 GHz)

airFiber AF-24 Receive Sensitivity

Modulation Sensitivity FDD Capacity* TDD Capacity*
64QAM -66 dBm 1500 Mbps 760 Mbps

16QAM -72 dBm 1000 Mbps 507 Mbps

QPSK MIMO -78 dBm 500 Mbps 253 Mbps

QPSK SISO -80 dBm 250 Mbps 127 Mbps

¼x QPSK SISO -87 dBm 62.5 Mbps 31.7 Mbps

* FDD = (2) 100 MHz channels and TDD = (1) 100 MHz channel
10
 airFiber AF-24 Radio Frequency
GPS GPS Clock Synchronization
Transceiver
EIRP ~33 dBm (FCC/IC), ~20 dBm (CE), ~40 dBm (Other Regions)
Frequency Accuracy ±2.5 ppm without GPS Synchronization
±0.2 ppm with GPS Synchronization
Channel Bandwidth 100 MHz
Operating Channels 24.1 GHz, 24.2 GHz
Modulation 64QAM MIMO
16QAM MIMO
QPSK MIMO
QPSK SISO
¼x QPSK SISO
Integrated Split Antenna
TX Gain 33 dBi
RX Gain 38 dBi
Beamwidth < 3.5°
Front-to-Back Ratio 70 dB
Polarity Dual-Slant Polarization
Cross-Polarity Isolation > 28 dB

airFiber AF-24 Capacity (Mbps)

Rate Modulation 100 MHz Channel Width*
6x 64 QAM MIMO 1500.0

4x 16 QAM MIMO 1000.0

2x QPSK MIMO 500.0

1x QPSK SISO 250.0

¼x ¼ QPSK SISO 62.5

* Aggregated capacity in Full-Duplex mode

11
 Best-in-Class Performance and Range Robust Mechanical Assembly
Our INVICTUS custom silicon dramatically improves wireless An independent lab has tested the airFiber mechanical
performance. The AF‑24HD model supports the dense assembly to meet MIL‑STD‑810G, a rigorous United States
modulation rates, up to 256QAM, that are required for high MIL‑STD (Military Standard) that defines a variety of
data rates, up to 2 Gbps. challenging environmental conditions.

The airFiber AF-24/AF-24HD features the most powerful The mechanical assembly has also undergone vibration
ASHET A

automatic compensation for path loss degradation due testing using an extended version of IEC 60068‑2‑6,
D

to rain fade, so it provides the best range among 24 GHz an environmental standard of the IEC (International
products and allows for constellation threshold extension. Electrotechnical Commission).

5 10
5 0
10

Side Back

12
Specifications
airFiber AF-24HD
Operating Frequency 24.05 – 24.25 GHz
Dimensions
Radio 593 x 768 x 370 mm (23.35 x 30.24 x 14.57")
Box 796 x 696 x 49.5 mm (31.34 x 27.40 x 1.95")
Weight
Radio (Mount Included) 17.3 kg (38.14 lb)
Box 25.5 kg (56.22 lb)
Max. Power Consumption 50W
Power Supply 50V, 1.2A PoE GigE Adapter (Included)
Power Method Passive Power over Ethernet
Supported Voltage Range +42 to +58VDC, -48VDC
Certifications CE, FCC, IC
Wind Loading 770 N @ 200 km/hr (170 lbf @ 125 mph)
Wind Survivability 200 km/hr (125 mph)
Mounting Pole Mount Kit (Included)
Operating Temperature -40 to 55° C (-40 to 131° F)
LEDs (8) Status LEDs:
Data Port Speed
Data Port Link/Activity
Configuration Port Speed
Configuration Port Link/Activity
GPS Synchronization
Modulation Mode
Master/Slave
RF Status
(1) Two-Digit LED Display Calibrated in dBm
Interface
Data Port (1) 10/100/1000 Ethernet Port
Configuration Port (1) 10/100 Ethernet Port
Auxiliary Port (1) RJ-12, Alignment Tone Port
System
Maximum Throughput 2 Gbps
Maximum Range 20+ km
Packets per Second 1+ Million
Packets per Second > 1 Million
Encryption 128-Bit AES
Uplink/Downlink Ratio 50% Fixed
Latency
Full Duplex Mode < 200 µs at Full Throughput
Half Duplex Mode < 2 ms at Full Throughput
MTU (Maximum Transmission Unit) Up to 9600

airFiber AF-24HD Receive Sensitivity

Modulation Sensitivity FDD Capacity* TDD Capacity*
256QAM -60 dBm 2000 Mbps 1024 Mbps
64QAM -66 dBm 1500 Mbps 760 Mbps
16QAM -72 dBm 1000 Mbps 507 Mbps
QPSK MIMO -78 dBm 500 Mbps 253 Mbps
QPSK SISO -80 dBm 250 Mbps 127 Mbps
¼x QPSK SISO -87 dBm 62.5 Mbps 31.7 Mbps

* FDD = (2) 100 MHz channels and TDD = (1) 100 MHz channel
13
 airFiber AF-24HD Radio Frequency
GPS GPS Clock Synchronization
Transceiver
EIRP ~33 dBm (FCC/IC), ~20 dBm (CE), ~40 dBm (Other Regions)
Frequency Accuracy ±2.5 ppm without GPS Synchronization
±0.2 ppm with GPS Synchronization
Channel Bandwidth 100 MHz
Operating Channels 24.1 GHz, 24.2 GHz
Modulation 256QAM MIMO
64QAM MIMO
16QAM MIMO
QPSK MIMO
QPSK SISO
¼x QPSK SISO
Integrated Split Antenna
TX Gain 33 dBi
RX Gain 40 dBi
Beamwidth < 3.5°
Front-to-Back Ratio 70 dB
Polarity Dual-Slant Polarization
Cross-Polarity Isolation > 28 dB

airFiber AF-24HD Capacity (Mbps)

Rate Modulation 100 MHz Channel Width*
8x 256 QAM MIMO 2000.0

6x 64 QAM MIMO 1500.0

4x 16 QAM MIMO 1000.0

2x QPSK MIMO 500.0

1x QPSK SISO 250.0

¼x ¼ QPSK SISO 62.5

* Aggregated capacity in Full-Duplex mode

AIJL092817

Specifications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ubnt.com/support/warranty
©2012-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airFiber, airOS,
INVICTUS, and xRT are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks
are the property of their respective owners.. www.ubnt.com

14