OWNER’S MANUAL

Wireless
Sound Bar

Please read this manual carefully before operating your set and retain it for future
reference.

MODEL
SL4 (SL4, SPH4B-W)

www.lg.com
2105_Rev02 Copyright © 2019-2021 LG Electronics Inc. All Rights Reserved.
 2 Getting Started

Safety Information NOTICE: For safety marking information including

product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION
1 RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Getting Started

The Power Plug is the disconnecting device. In case

CAUTION: TO REDUCE THE RISK OF ELECTRIC of an emergency, the Power Plug must remain readily
SHOCK DO NOT REMOVE COVER (OR BACK) accessible.
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL. Check the specification page of this owner’s manual
to be certain of the current requirements.
This lightning flash with arrowhead Do not overload wall outlets. Overloaded wall outlets,
symbol within an equilateral triangle loose or damaged wall outlets, extension cords, frayed
is intended to alert the user to the power cords, or damaged or cracked wire insulation
presence of uninsulated dangerous are dangerous. Any of these conditions could result
voltage within the product’s in electric shock or fire. Periodically examine the
enclosure that may be of sufficient magnitude to cord of your device, and if its appearance indicates
constitute a risk of electric shock to persons. damage or deterioration, unplug it, discontinue use of
The exclamation point within an the device, and have the cord replaced with an exact
equilateral triangle is intended replacement part by an authorized service center.
to alert the user to the presence Protect the power cord from physical or mechanical
of important operating and abuse, such as being twisted, kinked, pinched, closed
maintenance (servicing) instructions in a door, or walked upon. Pay particular attention to
in the literature accompanying the product. plugs, wall outlets, and the point where the cord exits
the device.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
 Getting Started 3

CAUTION: Only use the AC adapter supplied with

this device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage to
the device and void your warranty. 1
Symbols

Getting Started
~ Refers to alternating current (AC).

0 Refers to direct current (DC).

Refers to class II equipment.

1 Refers to stand-by.
! Refers to “ON” (power).

Refers to dangerous voltage.

4 Table of Contents

Table of Contents

1 Getting Started 2 Connecting

2 Safety Information 15 Organizing cables (Optional)
6 Introduction 15 Connecting the AC Adapter
7 Front panel 16 Wireless subwoofer connection
8 Rear panel 18 Connecting to your TV
9 Remote control 18 – Using an OPTICAL cable
12 Installing the sound bar 18 – LG Sound Sync
13 Mounting the main unit on a wall 20 Optional equipment connection
20 – OPTICAL IN connection
20 – USB connection
20 – Compatible USB devices
21 – USB device requirement
21 – Playable file
 Table of Contents 5

1
3 Operating 4 Troubleshooting
23 Basic operations 31 Troubleshooting
23 – USB operation 31 – General
24 Other operations 32 – NOTES to use wireless
2
24 – Using your TV remote control
25 – AUTO POWER On/Off
26 – Auto function change
5 Appendix
27 Using a Bluetooth Wireless Technology 33 Trademarks and licenses
27 – About Bluetooth 34 Specifications 3
27 – Bluetooth profiles 36 Handling the Speaker
27 – Listening to Music of a Bluetooth Device
29 – Controls connected Bluetooth device
29 – Bluetooth connection lock (BT LOCK)
29 Using BLUETOOTH App 4
29 – Install “LG Sound Bar” App onto Your
BLUETOOTH Device
30 – Activate BLUETOOTH with “LG Sound Bar”
App
5
 6 Getting Started

Introduction

1 Symbol used in this manual

,,Note
Getting Started

Indicates special notes and operating features.

>>Caution
Indicates cautions for preventing possible damages
from abuse.
 Getting Started 7

Front panel

Getting Started
Display Window
A -- Display window will be darkened automatically if there is no key input for 15 seconds.
When you press any button, the display window will brighten.

B Remote sensor
1 (Standby)
-- Switches the unit ON or OFF.
F (Function)
-- Select the function and input source by pressing F repeatedly.

Input source / Function Display

Optical
OPT
C LG Sound Sync (Wired)
Bluetooth BT
LG Sound Sync (Wireless) LG TV
USB USB

o/p (Volume)
-- Adjusts volume level.
, This unit will turn itself off to save electric consumption when the main unit is not connected to an external
device and is not used for 15 minutes.
 8 Getting Started

Rear panel

1
Getting Started

DC IN
A -- Connect to the AC adapter.
OPTICAL IN
B -- Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
USB Port
C -- Connect USB memory device to the USB port on the back of the unit.
 Getting Started 9

Remote control

Replacement of Battery 1
Remove the battery cover on the rear of the remote

Getting Started
control, and insert the battery with 4 and 5
matched correctly.

1 (Standby)
a
-- Switches the unit ON or OFF.
VOL (Volume) o/p
b
-- Adjusts speaker volume.
C/V (Skip/Search)
c -- Press C or V to go to next or previous file.
-- Press and hold C or V during playback and release it at the point you want.
N (Play/Pause)
-- Starts playback. / Pauses playback.
d yy BT (Bluetooth) connection Lock: It allows you to connect a Bluetooth device only on Bluetooth
and LG TV functions. (Page 29)
To turn on or off the Bluetooth connection lock, press and hold N for about 3 seconds and press it
again in BT (Bluetooth) function.
 10 Getting Started

SOUND EFFECT
-- Selects a sound effect mode by using SOUND EFFECT.

On Display Description
1
Analyzes the property of the input sound and provides the
ASC (Adaptive Sound Control)
Getting Started

sound optimized for the content in real time.

BASS BLAST or BASS BLAST+ Reinforces the bass and powerful sound.
STANDARD You can enjoy optimized sound.
e
CINEMA You can enjoy more immersive and cinematic surround sound.

yy TV remote: It allows you to control the volume of this unit by your TV remote control even by other
company’s product. (Page 24)
To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and
press it again.
, Supported TV brands
LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio

(Sound tuning)
-- Adjusts sound level of each speaker.
Select the speaker you want to adjust by using and adjust the sound level by using VOL o/p.

f Speaker Display Range

Sub Woofer WF -15 ~ 6
Treble TRE -5 ~ 5
Bass BAS -5 ~ 5
 Getting Started 11

F (Function)
g
-- Select the function and input source by pressing F repeatedly.
[ (Mute)
h
-- Press [ to mute your unit. To cancel it, press [ again.
1

Getting Started
J (Information)
-- You can display various information of the input source by pressing J.
-- OPT (Optical): Audio format
-- BT (Bluetooth): Connected Bluetooth device name
i
-- USB: File information contained on a USB.
yy Auto Power ON/OFF: It allows the unit to turn on and off automatically by input signals: Optical, LG
TV or Bluetooth (Page 25)
To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.
REPEAT
j
-- Press REPEAT to select desired repeat or random mode.
FOLDER W/S
k
-- Searches a folder on USB device.
 12 Getting Started

Installing the sound bar Installing the additional foot

You can extend the height of the unit by using
additional foot (height: 14 mm (0.55 inches))
You can hear the sound by connecting the unit to the
1 other device: TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
Getting Started

device you want. (Pages 18 - 20)

You can place the wireless subwoofer anywhere in
your room. But it is better to place the subwoofer
near the main unit. Turn it slightly toward the center
of the room to reduce the wall reflections. 1. Turn the unit upside down.
2. Peel off a sticker attached to the additional foot.
Then place it on the existing foot of the unit.
3. Press the additional foot with adequate force to
get it firmly fixed.

,,Note
If the sound bar covers the remote sensor of the
TV, please separate distance between the sound
bar and TV by 10 ~ 15 cm (3.9 ~ 5.9 inches) or
more.

>>Caution
yy For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Subwoofer when
installing or moving them.
 Getting Started 13

Mounting the main unit 1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach to
on a wall the position.

1
You can mount the main unit on a wall.

Getting Started
2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
>>Caution sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.
Because it is difficult to make a connection after
installing this unit, you should connect the cables
before installation.

Preparation materials
Unit

Wall bracket install guide

3. Remove the Wall bracket install guide.

Wall bracket
4. Fix the brackets with screws (A) as shown in the
illustration below.
Screws
(Not supplied)
Screws (A)

Wall plug

,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
 14 Getting Started

5. Put the unit on the brackets to match screw

holes on the bottom of the unit.

1
Getting Started

6. Fix the unit with the screws firmly.

,,Note
To detach the unit, perform it in reverse order.

>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the cause
of personal injury.
yy Do not hang onto the installed unit and avoid
any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
 Connecting 15

Organizing cables Connecting the AC

(Optional) Adapter
You can organize the cable with cable ties. Connect the speaker to the power supply with the
supplied AC adapter.
1. Hold the cables together with cable ties as shown
below. 1. Connect the supplied AC power cord to the AC
2. Tighten cable ties. adapter.
2. Connect the AC adapter cable to DC IN adapter 2
input.

Connecting
3. Plug the AC power cord into an AC outlet.

,,Note
yy After all connections are completed, you can
arrange cables as needed.
yy Cable ties are not supported.
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
 16 Connecting

Wireless subwoofer Manually pairing wireless subwoofer

When your connection is not completed, you can
connection check red LED on the wireless subwoofer and the
wireless subwoofer does not make sound. To solve
the problem, follow the steps. below.
LED indicator of wireless subwoofer 1. Press PAIRING on the rear of the wireless
subwoofer.
LED Color Status
Yellow - green The connection is trying.
2 (Blink)
Connecting

Yellow - green The connection is completed.

Red The wireless subwoofer is in

standby mode or the connection
is failed. -- The yellow - green LED on the front of the
wireless subwoofer blinks quickly.
Off The power cord of wireless (If the yellow - green LED does not blink, press
(No display) subwoofer is disconnected. and hold the PAIRING.)

Setting up the wireless subwoofer for 2. Turn on the sound bar.

the first time -- Pairing is completed. The yellow - green LED on
the front of the wireless subwoofer turns on.
1. Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and
the wireless subwoofer will be automatically
connected.
-- Yellow - green LED on the front of wireless
subwoofer turns on.
 Connecting 17

,,Note
yy It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
yy The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
-- There is an obstacle between the main unit 2
and the subwoofer.

Connecting
-- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
-- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.

!1 m
(3.3 ft)
 18 Connecting

Connecting to your TV LG Sound Sync

Using an OPTICAL cable

You can control some functions of this unit by
1. Connect the OPTICAL IN jack on the back of the your TV’s remote control with LG Sound Sync. It is
unit to OPTICAL OUT jack on the TV using an compatible with the LG TV that is supported LG
OPTICAL cable. Sound Sync. Make sure of the LG Sound Sync logo on
your TV.
2
Controllable function by LG TV’s remote control:
Volume up/down, mute
Connecting

Refer to the TV’s instruction manual for the details of

Optical LG Sound Sync.
cable Make one of the following connections, depending on
the capabilities of your equipment.

,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
2. Select the input source to OPT by pressing F remote control again, the unit synchronizes
repeatedly. with the TV.
According to TV Specifications, the volume
You can see “OPT” on the display window if
and mute of this unit synchronize with TV.
connecting normally between this unit and your
TV. yy When the connection fails, make sure of the
condition of the TV and power.
,,Note yy Make sure of the condition of this unit and
yy Before connecting the optical cable, be sure the connection in the cases below when using
to remove the protection plug cover if your LG Sound Sync.
cable has the cover.
-- The unit is turned off.
yy You can enjoy the TV audio through the
-- Changing the function to the others.
speakers of this unit. In the case of some TV
models, you must select the external speaker -- Disconnecting the optical cable.
option from the TV menu. (For details, -- Disconnecting the wireless connection
reference your TV user manual.) caused by interference or a distance.
yy Set up the sound output of TV to listen to the yy The amount of time to turn off this unit is
sound through this unit: different depending on your TV when you set
TV setting menu [ [Sound] [ [TV Sound AUTO POWER function to ON.
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending on
yy Details of TV setting menu vary depending on the models of your TV.
the manufacturers or models of your TV.
 Connecting 19

LG Sound Sync with wired connection LG Sound Sync with wireless

1. Connect your LG TV to the unit by using an
connection
optical cable. 1. Turn on the unit by pressing 1.
2. Select the LG TV function by pressing F
repeatedly.
3. Set up the sound output of TV to listen to the
sound through this unit:
Optical TV setting menu [ [Sound] [ [TV Sound
cable output] [ [LG Sound Sync (Wireless)] 2
“PAIRED” appears on the display window for

Connecting
about 3 seconds and then you can see “LG TV”
on the display window if connecting normally
between this unit and your TV.

2. Set up the sound output of TV to listen to the ,,Note

sound through this unit: If you turned off the unit directly by pressing
TV setting menu [ [Sound] [ [TV Sound 1 (Power), LG Sound Sync (Wireless) will be
output] [ [LG Sound Sync (Optical)] disconnected.
3. Turn on the unit by pressing 1.
4. Select the input source to OPT by pressing F
repeatedly.
You can see “LGOPT” on the display window if
connecting normally between this unit and your
TV.

,,Note
Details of TV setting menu vary depending on
the models of your TV.
 20 Connecting

Optional equipment USB connection

connection Connect USB memory device to the USB port on the
back of the unit.

OPTICAL IN connection
Connect an optical output jack of external devices to
the OPTICAL IN jack.
2
Connecting

Optical cable For more information of playing files on a USB, refer

to the page 23.
To the optical output
jack of external device Removing the USB Device from the unit.
1. Choose a different function/mode.
1. Connect the OPTICAL IN jack on the back of the
unit to optical out jack of your external device. 2. Remove the USB device from the unit.
2. Select the input source to OPT by pressing F
repeatedly.
Compatible USB devices
You can see “OPT” on the display window if yy MP3 Player: Flash type MP3 player.
connecting normally between this unit and your yy USB Flash Drive: Devices that support USB 1.1.
device. yy The USB function of this unit does not support
,,Note some USB devices.
Before connecting the optical cable, be sure to
remove the protection plug cover if your cable
has the cover.
 Connecting 21

USB device requirement Playable file

yy Devices which require additional program Sampling Frequency
installation connected to a computer, are not
MP3: within 32 to 48 kHz
supported.
WMA: within 32 to 48 kHz
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a Bitrate resolution
few minutes to be searched. MP3: within 80 to 320 kbps
yy To prevent data loss, back up all data. WMA: within 56 to 128 kbps
yy This unit is not supported when the total number 2
of files is 999 or more. yy Maximum files: Under 999

Connecting
yy The unit’s USB Port cannot be connected to PC. yy Maximum directories: Under 99
The unit can not be used as a storage device. yy A protected file by DRM (Digital rights
yy FAT16/FAT32 file system is supported on this unit. management) cannot be played on the unit.

yy Depending on some devices, it may not available to yy Video files in the USB storage device can not be
recognize the followings on this unit. played.
-- External HDD yy Depending on the performance of your USB
device, playback may not work well.
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
 22 Connecting

,,Note
yy Folders and files on the USB are recognized
as below.
: Folder
: File

a C

D
2
E
Connecting

b F
G
c H
I

d J
A
B

yy If there is no file in a folder, the folder will not

appear.
yy File will be played from file $A to file $J
one by one.
yy Files will be played in order recorded and it
may be different depending on the record
circumstances.
yy This unit can display file or folder names that
contain numbers or English characters only.
yy *ROOT: The first screen you can see when a
this unit recognize the USB is “ROOT”.
 Operating 23

Basic operations ,,Note

yy The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
USB operation yy Repeat/Random playback operates as follows.
1. Connect the USB device to the USB port.
On Display Description
2. Select the USB function by pressing F repeatedly.
OFF Plays songs on USB device
To Do this in order.
Press N on the remote ONE Plays a same song
Playback
control. repeatedly.
During playback, press N on FOLDER Plays songs in a folder
Pause
the remote control. repeatedly.
During playback, press V on ALL Plays all the songs on USB
3
the remote control to go to the device repeatedly.

Operating
next file.
Playing less than 3 seconds, SHUFFLE Plays all the songs once
Skip to the next/ press C on the remote randomly, and stops the
previous file control to go to the previous playback.
file.
Playing after 3 seconds, press
C on the remote control to
go to the beginning of the file.

Press and hold C/V on the

Search for a
remote control during playback
section within a
and release it at the point you
file
want to listen to.

Press REPEAT on the remote

Play repeatedly control repeatedly. Refer to
or randomly the note for details about the
display change.

Press FOLDER W/S on the

Search a folder
remote control.
This unit memorizes a current
Resume song which is played before
playback changing the function or
turning off the unit.
 24 Operating

Other operations

Using your TV remote control

You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold SOUND EFFECT on the remote
control for about 3 seconds. “ON - TV REMOTE”
appears and you can control this unit by your TV
remote control.
To check the status of this function, press and hold
3 SOUND EFFECT on the remote control.
To turn off this function, press and hold SOUND
Operating

EFFECT on the remote control and press it once

again while “ON - TV REMOTE” is scrolled.

,,Note
yy Make sure that the sound output of your TV
is set to [External speaker].
yy This function does not operate on LG TV’s
magic remote control.
yy Some remote control may not be supported.
 Operating 25

AUTO POWER On/Off ,,Note

yy After the unit is turned on by AUTO POWER
This unit automatically turns on by an input source:
function, it will be automatically turned off if
Optical, LG TV or Bluetooth.
there is no signal for a certain period of time
When you turn on your TV or an external device from the TV connected by LG Sound Sync
connected to this unit, this unit recognizes the input (Optical/Wireless).
signal and selects the suitable function. You can hear
yy After the unit is turned on by AUTO POWER
the sound from your device.
function, it will be automatically turned off if
If you try to connect your Bluetooth device, this there is no signal for a certain period of time
unit turns on and the unit will be connected to your from the external device.
Bluetooth device.
yy If you turned off the unit directly, it cannot
To turn on this function, press and hold J on the be turned on automatically by AUTO POWER
remote control for about 3 seconds and press it once function. However the unit can be turned on
again while “OFF - AUTO POWER” is scrolled. by AUTO POWER function when optical signal
To check the status of this function, press and hold comes in after 5 seconds of no signal.
J on the remote control.
3
yy Depending on the connected device, this
function may not operate.

Operating
To turn off this function, press and hold J on the
remote control for about 3 seconds and press it once yy If you disconnect Bluetooth connection by
again while “ON - AUTO POWER” is scrolled. this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy When you turn on this unit for the first time,
status of Auto Power function is turned on.
yy To use this function, the main unit must be
registered in paired devices list of Bluetooth
device.
yy You can set the Auto Power function only
when this unit is turned on.
 26 Operating

Auto function change

This unit recognizes input signals such as Optical,
Bluetooth and LG TV and then changes suitable
function automatically.

When optical signal comes in

When you turn on the external device connected to
this unit by an optical cable, this unit changes the
function to optical. You can hear the sound from your
device.

When you try to connect BLUETOOTH

device
When you try to connect your Bluetooth device to
3 this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
Operating

When LG TV signal comes in

When you turn on your LG TV connected by LG
Sound Sync (Wireless connection), this unit changes
the function to LG TV. You can hear the sound from
your TV.

,,Note
If the Bluetooth connection lock function is set,
Bluetooth connection will be only available on
Bluetooth and LG TV function. (Page 29)
 Operating 27

Using a Bluetooth Listening to Music of a

Bluetooth Device
Wireless Technology Before you start the pairing procedure, make sure
that the Bluetooth feature on your smart device
is turned on. Refer to your Bluetooth device’s user
About Bluetooth guide. Once a pairing operation is performed, it does
Bluetooth is wireless communication technology for not need to be performed again.
short range connection. 1. Select the Bluetooth function by pressing F
The sound may be interrupted when the connection repeatedly.
interfered by the other electronic wave or you Appears “BT” and then “READY” in display
connect the Bluetooth in the other rooms. window.
Connecting individual devices under Bluetooth 2. Operate the Bluetooth device and perform
wireless technology does not incur any charges. A the pairing operation. When searching for this
mobile phone with Bluetooth wireless technology speaker on your Bluetooth device, a list of the 3
can be operated via the Cascade if the connection devices found may appear in the Bluetooth
was made via Bluetooth wireless technology. device display depending on the type of

Operating
yy Available Devices: Smart phone, MP3, Notebook, Bluetooth device.
etc. Your speaker appears as “LG SL4(XX)”

yy Version: 4.0 3. Select the “LG SL4(XX)”.

yy Codec: SBC ,,Note

yy XX means the last four digits of address.
For example, if your unit has a MAC
Bluetooth profiles address such as 9C:02:98:4A:F7:08, you
In order to use Bluetooth wireless technology, will see “LG SL4(08)” on your Bluetooth
devices must be able to interpret certain profiles. This device.
speaker is compatible with following profile.
yy Depending on the Bluetooth device type,
A2DP (Advanced Audio Distribution Profile) some devices have a different pairing way.
For details about Bluetooth pairing, refer
to your Bluetooth device manual.
 28 Operating

4. When this unit is successfully connected with ,,Note

your Bluetooth device, yy If Bluetooth connection does not work well,
“PAIRED” [ your device’s name [ “BT” appears try pairing it again.
on the display window.
yy The sound may be interrupted when the
,,Note connection has interference by the other
yy If it is unavailable to display device name electronic waves.
on the unit, “-” will be displayed. yy Pairing is limited to one Bluetooth device per
yy To check the connected device’s name, unit and multi-pairing is not supported.
press J on the remote control. The yy Depending on the type of the device, you may
connected Bluetooth device’s name is not be able to use the Bluetooth function.
displayed.
yy You can enjoy Bluetooth function using
smart phone, MP3, Notebook, etc..
5. Listen to music.
yy The more distance between the unit and the
To play music in your Bluetooth device, refer to Bluetooth device, the lower the sound quality
3 your Bluetooth device’s user guide. becomes.
,,Note yy Bluetooth connection will be disconnected
Operating

yy When using Bluetooth technology, you have when the unit is turned off or the Bluetooth
to make a connection between the unit and device gets to far from the unit.
the Bluetooth device as close as possible and yy When Bluetooth connection is disconnected,
keep the distance. connect the Bluetooth device to the unit
However it may not work well in the case again.
below:
yy When the unit is not connected, “READY”
-- There is an obstacle between the unit and appears in the display window.
the Bluetooth device.
yy When you connect Bluetooth device (iOS
-- There is a device using same frequency device etc.) to this unit or operate the device,
with Bluetooth technology such as a the volume level can be synchronized with
medical equipment, a microwave or a each other.
wireless LAN device.
yy If you change to another function after
connecting Bluetooth, Bluetooth connection
will be disconnected. And you return to
Bluetooth function, Bluetooth connection
will be connected automatically.
 Operating 29

Controls connected Bluetooth Using BLUETOOTH App

device
You can control the connected Bluetooth device ,,Note
from the unit; play, pause, skip, volume. yy Only Android OS is available to use “LG Sound
Bar” app with this unit.
,,Note yy Additional data charges may occur if installed
yy Only Android OS and iOS is available to use
over 3G/4G, according to your device plan.
this function.
yy This function may not be supported
depending on the Bluetooth device or some
of TV operated differently. About “LG Sound Bar” App
“LG Sound Bar” app brings a suite of new features to
this unit.
Bluetooth connection lock (BT To enjoy more features, you are recommended to
3
download and install free “LG Sound Bar” app.
LOCK)

Operating
You can limit Bluetooth connection to only Install “LG Sound Bar” App onto
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connection. Your BLUETOOTH Device
To turn on this function, press and hold N on There are two ways to install “LG Sound Bar” app
the remote control for about 3 seconds in BT onto your Bluetooth device.
(Bluetooth) function and press it once again while
“OFF - BT LOCK” is scrolled. Then you can limit Install “LG Sound Bar” App through QR
Bluetooth connection. code
To turn off this function, press and hold N on
the remote control for about 3 seconds in BT 1. Install “LG Sound Bar” app through QR code. Use
(Bluetooth) function and press it once again while the scanning software to scan the QR code.
“ON - BT LOCK” is scrolled.

,,Note
Even if you set up BT LOCK function to On, this
sound bar turns on by Auto Power function. Turn
off Auto Power function to prevent it. (Page
25) 2. Tap an icon for installation.

,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on area, QR code may not work.
 30 Operating

Install “LG Sound Bar” App through ,,Note

“Google Android Market (Google Play yy “LG Sound Bar” app will be available in the
software version as follow;
Store)”
-- Android O/S: Ver 5.0 (or later)
1. Tap the “Google Android Market (Google Play
yy If you use “LG Sound Bar” app for operation,
Store)” icon.
there would be some differences between
2. In the search bar, type in the “LG Sound Bar” and “LG Sound Bar” app and the supplied remote
search it. control. Use the supplied remote control as
3. In the search result list, find and tap “LG Sound necessary.
Bar” to start downloading Bluetooth app. yy Depending on the Bluetooth device, “LG
4. Tap an icon for installation. Sound Bar” app may not work.

,,Note yy After connection of “LG Sound Bar” app,

music may be output from your device. In this
yy Make sure that your Bluetooth device is
case, try connecting procedure again.
connected to the Internet.
3 yy If you operate the other applications or
yy Make sure that your Bluetooth device is
change the settings on your Bluetooth device
Operating

equipped with “Google Android Market

while using “LG Sound Bar” app, “LG Sound
(Google Play Store)”.
Bar” app may operate abnormally.
yy When “LG Sound Bar” app operates
abnormally, check your Bluetooth device and
Activate BLUETOOTH with “LG the connection of “LG Sound Bar” app and
Sound Bar” App then try to connect again.
“LG Sound Bar” app helps to connect your Bluetooth yy Depending on the smart phone's operating
device to this unit. system, you have some differences for “LG
Sound Bar” operation.
1. Tap “LG Sound Bar” app icon on the home screen
to open “LG Sound Bar” app, and go to the main yy Even though Bluetooth connection will be
disconnected, you can use “LG Sound Bar”
menu.
app when you change the function.
2. If you want to get more information to operate,
tap [Setting] and tap [Help] menu. yy Additional features offered by "LG Sound Bar"
app may not work depending on the distance
between this unit and Bluetooth device and
wireless conditions.
 Troubleshooting 31

Troubleshooting

General
Symptoms Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not work yy Disconnect the power cord of this unit and the connected external device (TV,
properly. Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.

yy The power cord is unplugged.

Plug in the power cord.
No Power
yy Check whether electricity failed.
Check the condition by operating other electronic devices.

yy Incorrect input source is selected.

Check the input source and select the correct input source. 4
yy The mute function is activated.

Troubleshooting
No sound Press [ (Mute) or adjust the volume level to cancel the mute function.
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.

yy The power cord of the subwoofer is not connected.

Plug the power cord into the wall outlet securely.
No woofer sound
yy Pairing between the unit and the subwoofer gets disconnected.
Connect the unit and the subwoofer. (Page 16)

yy The remote control is too far from the unit.

Operate the remote control within about 7 m (23 ft).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
not work properly. Remove the obstacle.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.

yy Check connection of the external device such as TV, DVD/Blu-Ray player or

The AUTO POWER function Bluetooth device.
does not work.
yy Depending on the connected device, this function may not operate.

yy Check whether your LG TV supports LG Sound Sync.

LG Sound Sync does not yy Check connection of LG Sound Sync (Optical or wireless).
work.
yy Check sound setting of your TV and this unit.
 32 Troubleshooting

Symptoms Cause & Solution

The unit does not connect yy Turn off the Bluetooth connection lock function. (Page 29)
with Bluetooth device.

Check the details below and adjust the unit according to them.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT
setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
When you feel the output yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
sound of the unit is low. setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on connected device setup menu to [OFF] state.
yy Make sure Night time mode is not On. Turn [OFF] Night time mode.

NOTES to use wireless

Symptoms Cause & Solution
4 This device may have yy Wireless may not operate normally in weak signal area.
wireless interference.
Troubleshooting

yy Please install the device close enough to wireless subwoofer.

yy Do not install the device on metal furniture for optimum performance.
Bluetooth device may yy When any part of your body contact the transceiver of the Bluetooth device
malfunction or make or sound bar.
noise in the following yy When there is an obstacle or wall or the device is installed in a secluded spot.
cases.
yy When there is a device (a wireless LAN, a medical equipment or a microwave)
using same frequency, make the distance between the products as far away
as possible each other.
yy When connecting the device to the Bluetooth device, make the distance
between the products as close as possible each other.
yy When the device gets too far from the Bluetooth device, the connection is
disconnected and also malfunction may occur.
 Appendix 33

Trademarks and licenses

All other trademarks are trademarks of their
respective owners. The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, DTS and the Symbol
together, and Digital Surround are registered
trademarks and/or trademarks of DTS, Inc. in the 5
United States and/or other countries. © DTS, Inc.

Appendix
All Rights Reserved.
 34 Appendix

Specifications
General
Power consumption Refer to the main label on the unit.
yy Model: DA-38A25
yy Manufacturer: Asian Power Devices Inc.
yy Input: 100 - 240 V ~ 50 - 60 Hz
yy Output: 25 V 0 1.52 A
AC adapter
yy Model: MS-Z1520R250-038A0-P
yy Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
yy Input: 100 - 240 V ~ 50/60 Hz
yy Output: 25 V 0 1.52 A
Approx. 890.0 mm X 57.0 mm X 85.0 mm With foot
Dimensions (W x H x D)
(35 inch x 2.2 inch x 3.3 inch)
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Bus Power Supply (USB) 5 V 0 500 mA
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling Frequency
Available Digital Input Audio format Dolby Audio, DTS Digital Surround, PCM
5
Appendix

Input/Output
OPTICAL IN 3 V (p-p), Optical jack x 1

Amplifier (RMS Output)

Total 300 W RMS
Front 50 W RMS x 2 (4 Ω at 1 kHz, THD 10 %)
Subwoofer 200 W RMS (3 Ω at 80 Hz, THD 10 %)
 Appendix 35

Wireless subwoofer
Power requirements Refer to the main label on the subwoofer.
Power consumption Refer to the main label on the subwoofer.
Type 1 Way 1 Speaker
Impedance 3Ω
Rated Input Power 200 W RMS
Max. Input Power 400 W RMS
Approx. 171.0 mm x 390.0 mm x 261.0 mm
Dimensions (W x H x D)
(6.7 inch x 15.3 inch x 10.2 inch)

yy Designs and specifications are subject to change without prior notice.

Appendix
 36 Appendix

Handling the Speaker

When shipping the speaker
Please save the original shipping carton and packing
materials. If you need to ship the speaker, for
maximum protection, re-pack the speaker as it was
originally packed at the factory.

Keeping the exterior surfaces clean

yy Do not use volatile liquids such as insecticide spray
near the speaker.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the speaker for a long period of time.

Cleaning the speaker

To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the speaker.

5
Appendix