Yamaha bd-s473

BLU-RAY DISC PLAYER
BD-S473 SERVICE MANUAL

* When the MAIN P.C.B. is replaced, the serial number and new MAC address MUST be reported to
Yamaha Corporation by e-mail.
E-mail: ycav-keycontrol@gmx.yamaha.com
For more information, refer to “SERVICE PRECAUTIONS”.
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■ CONTENTS
TO SERVICE PERSONNEL ........................................2–4 REWRITING OPU PARAMETER ............................ 18–24
PREVENTION OF ELECTROSTATIC DISCHARGE ......5 FRONT PANEL KEYS LOCK MODE ............................25
REGION MANAGEMENT INFORMATION .....................6 BLOCK DIAGRAM ........................................................27
FRONT PANEL ...............................................................7 WIRING DIAGRAM .......................................................28
REAR PANELS ...........................................................7–8 PRINTED CIRCUIT BOARDS .................................29–30
REMOTE CONTROL PANELS .......................................9 SCHEMATIC DIAGRAMS .......................................31–41
SPECIFICATIONS ................................................... 10–12 REPLACEMENT PARTS LIST ................................42–43
INTERNAL VIEW .......................................................... 13 REMOTE CONTROL ...............................................44–45
SERVICE PRECAUTIONS ...................................... 14–15 SOFTWARE UPGRADE ...............................................46
DISASSEMBLY PROCEDURES ............................. 16–17
RX-V673/HTR-6065/
BD-S473
RX-A720
Copyright © 2012 All rights reserved.

101240 This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
'12.06
BD-S473
■ TO SERVICE PERSONNEL AC LEAKAGE

1. Critical Components Information WALL EQUIPMENT TESTER OR
Components having special characteristics are marked and OUTLET UNDER TEST EQUIVALENT
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
INSULATING
that all exposed conductive surfaces are properly insulated TABLE
from supply circuits.
• Meter impedance should be equivalent to 1500 ohms shunted • Leakage current must not exceed 0.5mA.
by 0.15 μF. • Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!

This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
About lead free solder

All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.
Among some types of lead free solder currently available, it is recommended to use one of the following types for the
repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
BD-S473
2
BD-S473
WARNING: Laser Safety

This product contains a laser beam component. This component may emit invisible, as well as visible radiation,
which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must
be used during servicing of the unit.
1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm/1 feet
away from the laser pick-up unit at all times. Do not stare at the laser beam at any time.
2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual.
3) CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Laser Emitting conditions:

1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the “ON” position, the laser component will
emit a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate
through the lens of the laser pick-up unit. Do not attempt any servicing during this period!
If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any
laser emissions.
2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory
prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this
manual. Adjustment of this control can increase the laser emission level from the device.
Laser Diode Properties

Type: Class 1 LASER Product
Wavelength: CD: 790 nm
DVD: 658 nm
BD: 405 nm
Laser output: max. 1 mW
RX-V673/HTR-6065/
BD-S473
RX-A720
3
BD-S473
Warning for power supply

The primary side of the power supply carries live mains voltage when the player is connected to the mains even
when the player is switched off !
This primary area is not shielded so it is possible to accidentally touch copper tracks and/or components when servicing
the player.
Service personnel have to take precautions to prevent touching this area or components in this area.
Note:
The screws on the BD/DVD mechanism may never be touched, removed or re-adjusted.
Handle the BD/DVD mechanism with care when the unit has to be exchanged!
The BD/DVD mechanism is very sensitive for dropping or giving shocks.
BD-S473
4
BD-S473
■ PREVENTION OF ELECTROSTATIC DISCHARGE

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are
called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect
transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence
of component damage caused by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD
on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging
ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD
protected)” can generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil
or comparable conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective
material to the chassis or circuit assembly into which the device will be installed.
CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as
brushing together of your fabric clothes or lifting of your foot from a carpeted floor can generate static electricity (ESD)
sufficient to damage an ES device).
Grounding for electrostatic breakdown prevention

1. Human body grounding.
Use the antistatic wrist strap to discharge the static electricity from your body.
2. Work table grounding.
Put a conductive material (sheet) or steel sheet on the area where the optical pickup is placed and ground the sheet.
Caution:
The static electricity of your clothes will not be grounded through the wrist strap. So take care not to let your clothes touch
the optical pickup.
Anti-static wrist strap

1M-ohms
Conductive material
(sheet) or steel sheet
RX-V673/HTR-6065/
BD-S473
RX-A720
5
BD-S473
■ REGION MANAGEMENT INFORMATION

This BD/DVD player is designed and manufactured to respond to the Region Management Information that is recorded
on a BD/DVD disc. If the Region code/number described on the BD/DVD disc does not correspond to the Region code/
number of this BD/DVD player, this BD/DVD player cannot play this disc.
• BD-video Region Code
A
A B
• DVD-video Region Number
This product incorporates copyright

protection technology that is protected by
5
method claims of certain U.S. patents and
other intellectual property rights owned by 2
Macrovision Corporation and other rights

owners.
Use of this copyright protection technology 1
must be authorized by Macrovision 6 2
Corporation, and is intended for home 2
3
and other limited viewing uses only unless
otherwise authorized by Macrovision 4
5
Corporation. 4
Reverse engineering or disassembly is 2
prohibited.
BD-S473
6
BD-S473
■ FRONT PANEL
■ REAR PANELS
U model
T model
K model
A model RX-V673/HTR-6065/
BD-S473
RX-A720
7
BD-S473
B model
G model
F model
L model
P model
BD-S473
8
BD-S473
■ REMOTE CONTROL PANELS

BDP120 BDP121
(U model) (T, K, A, B, G, F, L, P models)
PROGRAM: Red
MARKER: Green
DIGEST: Yellow
ZOOM: Blue
RX-V673/HTR-6065/
BD-S473
RX-A720
9
BD-S473
■ SPECIFICATIONS
■ Input/Output Section
HDMI Output
........................................................................Type A connector × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Color support
– “Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-Live™”, “BONUSVIEW™”,
USB and the logos are trademarks of the Blu-ray Disc Association.
........................................................................Type A connector × 2
Other
................................................................................... NETWORK x 1
■ General
– is a trademark of DVD Format/Logo Licensing Corporation.
Power Supply
U, K models .................................................... AC 110–240 V, 60 Hz
T, A, B, G, F models ........................................ AC 110–240 V, 50 Hz
– “HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are
L, P models ................................................ AC 110–240 V, 50/60 Hz
trademarks, or registered trademarks of HDMI Licensing LLC.
Power Consumption
.................................................................................................. 18 W
– “x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
Standby Power Consumption
......................................................................................0.5 W or less
Dimensions (W x H x D)
................................................435 x 50 x 202 mm (17-1/8" x 2" x 8") – “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation
and Sony Corporation.
Weight
................................................................................. 2.0 kg (4.4 lbs.)
– Java and all Java-based trademarks and logos are trademarks or
Finish
registered trademarks of Sun Microsystems, Inc. in the United States
U, T, K, A, B, G, F, L, P models ....................................... Black color and/or other countries.
Accessories
Remote control ..............................................................................x 1 – This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial use
Battery (R03, AAA, UM-4) .............................................................x 2 of a consumer to (i) encode video in compliance with the AVC Standard
and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1
Video that was encoded by a consumer engaged in a personal and non-
* Specifications are subject to change without notice. commercial activity and/or was obtained from a video provider licensed
to provide AVC/VC-1 Video. No license is granted or shall be implied for
U .....U.S.A. and Canadian model G ................... European model any other use. Additional information may be obtained from MPEG LA,
T........................Chinese model F ....................... Russian model LLC.
K ........................Korean model L ................... Singapore model
A ...................Australian model P .......... Latin American model – Windows Media Player is a registered trademark or trademark of
B .........................British model Microsoft corporation in the United States and/or other countries.
– YouTube and the YouTube logo are trademarks of Google. Inc.
– Audio-visual material may consist of copyrighted works which must not

be recorded without the authority of the owner of the copyright. Refer to
relevant laws in your country.
– DLNA and DLNA CERTIFIED are trademarks and/or service marks of

Digital Living Network Alliance.
– Manufactured under license from Dolby Laboratories. Dolby and the – Copyright 2004-2010 Verance Corporation. Cinavia™ is a Verance
double-D symbol are trademarks of Dolby Laboratories. Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide
patents issued and pending under license from Verance Corporation. All
rights reserved.
– DTS, the Symbol, & DTS and the Symbol together are registered
trademarks & DTS Digital Surround and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
BD-S473
10
BD-S473
• DIMENSIONS
(1-1/8")
69.5 296 (11-5/8")
(2-3/4")
29
ø 22
112 (4-3/8")
199 (7-7/8")
201 (7-7/8")
ø 60
(2-1/4")
58
1.8
(1/8")
50 (2") 335 (13-1/4")
(1-3/4")
50 (2")
44
6
(1/4")
435 (17-1/8")
Unit: mm (inch)
RX-V673/HTR-6065/
BD-S473
RX-A720
11
BD-S473
• SET MENU TABLE
MENU SUB-MENU VALUE

General System Screen Saver [On] / Off
Setting Disc Auto Playback [On] / Off
HDMI Control On / [Off]
Network Control On / [Off]
Load Default Reset all settings of this Player to default setting except Security setting.
Upgrade Upgrade the software manually from USB Storage or Network.
Easy Setup Press ENTER to start Easy Setup.
Local Storage Information Format
Setup Front USB / [Rear USB]
3D Playback Message [On] / Off
Language OSD [English] / Français / Español / Deutsch / Italiano / Svenska / Nederlandse /
Рyccкий / 中文
Menu [English] / Français / 中文 / Español / Deutsch / Italiano / Nederlandse / Portuguese /
Audio Danish / Svenska / Finnish / Norwegian / Рyccкий / Korean / Japanese / More
Subtitle English / Français / 中文 / Español / Deutsch / Italiano / Nederlandse / Portuguese /
Danish / Svenska / Finnish / Norwegian / Рyccкий / Korean / Japanese / More / [Off]
Playback Angle Mark [On] / Off
PIP Mark [On] / Off
Secondary Audio Mark [On] / Off
Last Memory [On] / Off
Netflix Information Deactivate Yes / [No]
(U model)
Security Change Password Set the password for changing the Parental Control and Country Code.
* Default password: 0000
Parental Control [Off] / 1 to 8
Country Code Set the Country Code. (Password is necessary)
Network Internet Connection [Enable] / Disable
Information Interface (Ethernet) / Address Type / IP Address / Subnet Mask / Default Gateway /
DNS1 / DNS2
Connection Test Perform the network connection test.
IP Setting [Auto] / Manual
BD-Live Connection Permitted / [Partial Permitted] / Prohibited
DLNA [Enable] / Disable
Proxy Setting [Disable] / Enable / Proxy Host / Proxy Port
Display TV 3D Output [Auto] / Off
Setting TV Screen 16:9 Full / [16:9 Normal] / 4:3 Pan Scan / 4:3 Letterbox
Video Out Select [Auto] / Disc Native / 480i/576i / 480p/576p / 720p / 1080i / 1080p
TV System [NTSC] / PAL / Multi (U, K, P models)
NTSC / [PAL] / Multi (T, A, B, G, F, L models)
Color Space [YCbCr 4:4:4] / YCbCr 4:2:2 / Full RGB / RGB
HDMI Deep Color 30 bits / 36 bits / 48 bits / [Off]
HDMI 1080p 24Hz [Auto] / Off
Lip Sync [Auto] / Manual (2D / 3D) / Off
Video Video Mode [Standard] / Vivid / Cinema / Custom
Process Select “Custom”.
Brightness / Saturation / Hue / Contrast / Sharpness / CTI
* Default settings: 0
Color Adjust Brightness / Saturation / Hue for each color (Red/Green/Blue/Yellow/Cyan/Magenta)
* Default settings: 0
Noise Reduction 0 / 1 / [2] / 3
De-interlacing Mode [Auto] / Film / Video
Audio Audio HDMI [Bitstream] / PCM / Reencode / Off
Setting Output DRC Off / On / [Auto]
BD-S473
System Software version and MAC address are displayed.

Information
12
BD-S473
■ INTERNAL VIEW
1 2 3 1 BD MECHANISM UNIT
2 MAIN P.C.B.
3 POWER SUPPLY UNIT
4 OPERATION P.C.B. (VFD)
5 OPERATION P.C.B. (POWER)
5 4
RX-V673/HTR-6065/
BD-S473
RX-A720
13
BD-S473
■ SERVICE PRECAUTIONS
● Report of serial number and MAC address
When the MAIN P.C.B. is replaced, the serial number and new MAC address MUST be reported to Yamaha
Corporation by e-mail. (Fig. 1)
E-mail: ycav-keycontrol@gmx.yamaha.com
ycav-ysiss@gmx.yamaha.com ycav-keycontrol@gmx.yamaha.com
BD-S473 Model name
xxxxxxxxx Serial number
xxxxxxxxx New MAC address
Send this e-mail to Yamaha Corporation
Fig. 1
<Confirmation of the Serial Number>

The serial number “SERIAL NO. xxxxxxx” can be found on the rear panel. (Fig. 2)
Rear view Serial number
Fig. 2
<Confirmation of the New MAC address>

Connection
Connect a TV monitor to this unit as shown below. (Fig. 3)
TV monitor
HDMI input
HDMI output
This unit
HDMI cable
Fig. 3
BD-S473
14
BD-S473
Operation Procedure
Using the remote control, perform the following procedure while watching the TV monitor screen.
1. With this unit in the standby mode, press the “ ” (On/Standby) key to turn on the power.
The initial screen is displayed.
2. Press the “SETUP” key.
The SETUP menu is displayed. (Fig. 4)
Remote control Initial screen SETUP menu screen
No Disc
“SETUP” key
Fig. 4
3. Press the “ ”/“ ” key to select the System Information.

The new MAC address is displayed. (Fig. 5)
SETUP menu screen
Select the System Information

--- System Information ---
Software Version : 0.185O1000

MAC : 00 -A0 -DE -xx -xx -xx New MAC address
Fig. 5
RX-V673/HTR-6065/
BD-S473
RX-A720
15
BD-S473
■ DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover 2. Removal of BD Mechanism Unit

a. Remove 2 screws (①) and 4 screws (②). (Fig. 1) a. Remove 4 screws (③). (Fig. 1)
b. Slide the top cover rearward to remove it. (Fig. 1) b. Remove HA301, HA801 and J801. (Fig. 1)
c. Remove the BD mechanism unit. (Fig. 1)
① Top cover
②
BD mechanism unit ③
HA801
③
① 23 mm
(15/16")
Terminal side
Flexible flat cable
Clip
Use a clip or other item to ground

the unit.
MAIN P.C.B.
J801 HA801
HA301
Fig. 1
• How to manually eject the disc tray

a. Using an Allen hex socket screwdriver (size: 1.3 mm Disc tray
or .050"), move the slider at the bottom side in the
direction of the arrow as shown below until the disc
tray comes out. (Fig.2)
b. Gently pull the disc tray out. (Fig. 2)
Hole
Bottom side
BD-S473
Allen hex socket screwdriver Slider

(size: 1.3 mm or .050")
Fig. 2
16
BD-S473
2-1. Removal of Loading Belt

a. Remove 2 screws (④). (Fig. 3)
b. Release 2 hooks and remove the top case. (Fig. 3)
c. Eject the disc tray and remove the loading belt. (Fig. 3)
④ ④
Top case
Hook
Loading belt
Disc tray
Hook
Fig. 3
3. Removal of Front Panel Unit

a. Remove CON1, J305 and J410. (Fig. 4)
b. Release 6 hooks and remove the front panel unit. (Fig. 4)
Front panel unit
MAIN P.C.B.
Hook Power supply unit
Hook
Hook Hook J305 CON1

J410
Fig. 4
RX-V673/HTR-6065/
BD-S473
RX-A720
17
BD-S473
■ REWRITING OPU PARAMETER

* OPU stands for Optical Pick-up Unit.
When the following parts are replaced, the OPU parameter must be rewritten in order that this unit operates properly.
BD mechanism unit
MAIN P.C.B.
● Required Tools
Items supplied from Yamaha Corporation
• OPU parameter writing program: Rpower.exe
• USB-UART conversion adaptor (Part No. WW867800)
USB-UART conversion adaptor x 1, USB cable (type A to type A) x 1
Note: 4P flexible flat cable is not for the Writing OPU parameter.
• Test disc set (Part No. WW867900)
For the Playback Test: BD-ROM SL (Single Layer), BD-R DL (Dual Layer), DVD-ROM DL (Dual Layer) and CD-ROM
Note: BD-ROM DL (Dual Layer) is not for the Playback Test.
Items not supplied from Yamaha Corporation

• PC
• 2D barcode reader (which supports Data Matrix symbology)
• TV monitor
● Preparation and precaution

• Download the Rpower 8550 5.12.61 (KEM470) folder from the specified download source to the PC.
• While writing OPU parameter, keep the other application software on the PC closed. It is also recommended to
keep the software on the task tray closed as well.
● Outline of operation procedure

<When replacing BD mechanism unit>
1. Read the OPU parameter of a replacement BD mechanism unit in advance, and save it to the PC. (See “Reading
and saving OPU parameter”)
2. Install the replacement BD mechanism unit after removing the originally installed one.
3. Write the OPU parameter saved on the PC to the FLASH ROM on MAIN P.C.B., and check disc playback capability
consecutively. (See “Writing OPU Parameter and Playback Test”)
<When replacing MAIN P.C.B.>

1. Replace the MAIN P.C.B.
2. Remove the originally installed BD mechanism unit once.
3. Read the OPU parameter of the removed BD mechanism unit, and save it to the PC. (See “Reading and saving
OPU parameter”)
4. Reinstall the removed BD mechanism unit.
5. Write the OPU parameter saved on the PC to the FLASH ROM on MAIN P.C.B., and check disc playback capability
consecutively. (See “Writing OPU Parameter and Playback Test”)
BD-S473
18
BD-S473
● Details of Operation Procedure

Reading and saving OPU parameter
Read the 2D barcode (= OPU parameter) indicated on the top surface of the BD mechanism unit with a 2D barcode reader
and save it to the PC after decoding it to the text data. (Fig. 1)
Top view of BD mechanism unit

2D barcode reader
2D barcode
to PC
OPU parameter text data
00JK3T01050007FE040000000000000000002C2C2xxxxxxxxxxxxxxxx
Fig. 1
Note: If you don’t have 2D barcode reader, take a picture of 2D barcode with a digital camera, and send its image data to
the following e-mail address.
E-mail: ycav-ysiss@gmx.yamaha.com
Yamaha Corporation will reply providing the OPU parameter text data. (Fig. 2)
E-mail: ycav-ysiss@gmx.yamaha.com
Top view of BD mechanism unit
ycav-ysiss@gmx.yamaha.com
Digital Camera
BD-S473 Model name
2D barcode xxxxxxxxx Serial number
xxxxxxxxx.jpg Image data
Send this e-mail to Yamaha Corporation
Receive this e-mail from Yamaha Corporation
OPU parameter text data
00JK3T01050007FE040000000000000000002C2C2xxxxxxxxxxxxxxxx
Fig. 2
RX-V673/HTR-6065/
BD-S473
RX-A720
19
BD-S473
Writing OPU Parameter and Playback Test
<Connection>
1. Disconnect the power cable from the AC outlet and remove the top cover. (See “DISASSEMBLY PROCEDURES”.)
2. Connect the USB port of the PC to the writing port (COM802 on MAIN P.C.B.) of this unit as shown below. (Fig. 3)
PC This unit (top view)
COM802
USB port
USB-UART conversion adaptor
MAIN P.C.B.
CB102
USB cable CB101
Fig. 3
3. Connect a TV monitor to this unit as shown below. (Fig. 4)
TV monitor
HDMI input
HDMI output
This unit
HDMI cable
Fig. 4
BD-S473
20
BD-S473
<Operation>
The operation consists of 2 parts as follows.
Procedure 1 to 9: Writing OPU Parameter
Procedure 10 to 14: Playback Test
1. Press the “ ” (On/standby) key to turn on the power.
This unit FL display
PLEASE W NO DISC
FL display
Fig. 5
2. Start up Rpower.exe.
The screen appears as shown below. (Fig. 6)
3. Select the port and baud rate. (Fig. 6)
• Com Port: Select the USB port of PC connected to the USB–UART conversion adaptor.
• Baud Rate: Select “115200”.
Rpower8550 5.12.61 (2010/07/15) SONY KEM470 Ver.A −−− ComPort 6 −−−
Fig. 6
RX-V673/HTR-6065/
BD-S473
RX-A720
21
BD-S473
4. Follow the steps below to check that communication between the PC and this unit is established.
• Click [TrayOut F1]. The disc tray opens. (Fig. 7)
• Click [TrayIn F3]. The disc tray closes. (Fig. 7)
* If the disc tray does not operate, recheck the connection especially the Com Port of the PC and perform operation
from the beginning again.
TrayIn[F3]
TrayOut[F1]
Fig. 7
5. Copy the OPU parameter text data from the PC to [Bar Code]. (Fig. 8)
00EK340304FD0BFF010000000000000000002B302xxxxxxxxxxxxxxxx
Fig. 8
BD-S473
22
BD-S473
6. Click [Write (F2)] to start writing the OPU parameter. (Fig. 9)

When writing of the OPU parameter is completed, the “Pass” indicator lights green. (Fig. 9)
Writing being executed Writing completed

Rpower8550 5.12.61 (2010/07/15) SONY KEM470 Ver.A −−− ComPort 6 −−− Rpower8550 5.12.61 (2010/07/15) SONY KEM470 Ver.A −−− ComPort 6 −−−
Fig. 9
* When the “NG” indicator lights red, perform “Writing OPU Parameter and Playback Test” from the beginning again.
(Fig. 10)
Fig. 10
7. Click [X] to end Rpower.exe. (Fig. 11)
Fig. 11
RX-V673/HTR-6065/
8. Press the “ ” (On/standby) key to turn off the power.

BD-S473
RX-A720
9. Disconnect the USB-UART conversion adaptor connected between USB port of the PC and writing port (COM802 on
MAIN P.C.B.) of this unit.
23
BD-S473
10. Press the “ ” (On/Standby) key to turn on the power.

The FA mode is activated and the screen appears on the TV monitor as shown below. (Fig. 12)
TV monitor screen The disc type to be tested is shown here.
Insert Disc : BD-ROM SL
Current Disc :
Current Stage : Wait Disc
Press "Stop" key to disable FA mode and UI exit OSD TEST mode
Fig. 12
11. Repeating the steps below, complete the playback test using 4 types test discs.
1) Load the specified test disc on the disc tray, and push the disc tray to close it.
2) Playback starts automatically, then the disc tray opens automatically after playback ends.
* If the result is OK, the disc type to be tested next is shown.
* If the result is NG, “Fail” is shown. In such a case, first check that the test disc is not dirty and scratched, then turn
off the power once and perform the test from procedure 9 again.
TV monitor screen
Test disc type Required time for play
Insert Disc : CD-ROM • BD-ROM SL : About 15 seconds
• BD-R DL : About 15 seconds
Current Disc : CD-ROM
• DVD-ROM DL : About 15 seconds
Current Stage : Test finish
• CD-ROM : About 15 seconds
Pas Note: BD-ROM DL is not for the playback test.
Press "Stop" key to disable FA mode and UI exit OSD TEST mode
Fig. 13
12. “Pas” is displayed when the Playback Test is completed successfully. (Fig. 13)
13. Press the “ ” (Stop) key to cancel the FA mode.
TV monitor screen is turned off.
14. Press the “ ” (On/Standby) key to turn off the power.
Note: Be sure to cancel the FA mode by pressing the “ ” (Stop) key before turning off the power, otherwise the FA
mode will be activated again when the power is turned on next.
BD-S473
24
BD-S473
■ FRONT PANEL KEYS LOCK MODE

In the front panel keys lock mode, the all front panel keys operation is stopped temporarily.
● Setting Front Panel Keys Lock mode

Before setting the front panel keys lock mode, prepare a disc for playback in advance.
1. Press the “ ” (On/Standby) key to turn on the power. (Fig. 1)
2. Open the disc tray by pressing the “ ” (Eject) key and load the disc for playback on the disc tray. (Fig. 1)
Front view
“ ” (On/Standby) key “ ” (Eject) key FL display
“ ” (Stop) key
Fig. 1
3. With the disc tray opened, keep pressing the “ ” (Eject) and “ ” (Stop) keys for 5 seconds or longer. (Fig. 1)
The front panel keys lock mode is set, the display is changed to “LOCK” and the disc tray closes automatically.
Open the disc tray Front panel keys lock mode
OPEN LOCK
Fig. 2
* Only the remote control is available for operation when this unit is in the front panel keys lock mode. If any key
on the front panel is pressed, the “Lock” is displayed only.
● Canceling Front Panel Keys Lock mode

With the power turned on, press the “ ” (Eject) key on the remote control. (Fig. 3)
The front panel keys lock mode is cancelled and “UNLOCK” is displayed which then returns to the normal display.
UNLOCK
Remote control
“ ” (Eject) key
RX-V673/HTR-6065/
Fig. 3
BD-S473
RX-A720
25
BD-S473
MEMO
BD-S473
26
A B C D E F G H I J
BD-S473
1 ■ BLOCK DIAGRAM
J200
HPD
HDMI HDMI
P302
CEC USB (Rear)
2 CON701
P302
USB (Front) r 4FFQBHF→
OPERATION
NETWORK RJ45 SCHEMATIC DIAGRAM
Ethernet U301
10/100
ETH HDMI USB1 USB0 NAND FLASH
NFLASH SLC
U150
3 U100
16 DDR3 SDRAM
MT8555 DDR
CHB 64M x 16
1600MHz
PWR: U101
3.3V/1.5/1.1V
DDR 16 DDR3 SDRAM STB5V +5V +12V AC IN
CHA 64M x 16
1600MHz
U102
4 MOTOR 1.0A
STB MCU
16 DDR3 SDRAM +12V
IR SPI 27MHz
64M x 16
1600MHz
AUDIO OP.
+5V
MOTOR DRIVER 4.0A

+1.15V
5 COLLIMATOR DRIVER
BD MECHANISM UNIT
1.0A
+1.5V
U701
1.0A
VFD +3.3V
IR
LOGIC 200mA
6 FIP_IR AND STB3.3V
U702
Power Supply Unit
Remote control sensor
7 OPERATION r 4FFQBHF→
MAIN r 4FFQBHFm→
SCHEMATIC DIAGRAM SCHEMATIC DIAGRAM
27
A B C D E F G H I J
BD-S473
1 ■ WIRING DIAGRAM
AC IN
CON1
HA801
MAIN CON2
3
J305 Power Supply Unit

HA903
J801
J410 J1
CON3
4 BD Mechanism Unit
OPERATION (POWER)
6
JP801
JP703 JP702
JP704 OPERATION (VFD) J701
Front Panel
7
28
A B C D E F G H I J
BD-S473
1 ■ PRINTED CIRCUIT BOARDS

FOR INFORMATION ONLY (COMPONENT PARTS NOT AVAILABLE)
MAIN (Side A) MAIN (Side B)
2
NETWORK/
USB (Rear) HDMI
(for factory)
3
BD mechanism unit
4 (for factory)
Writing port
OPERATION
(JP703)
BD mechanism unit OPERATION Power supply unit

(JP702) (CON2)
6 (for factory)
29
A B C D E F G H I J
BD-S473
OPERATION (Side A)
MAIN MAIN Power supply unit

(J305) (J410) (CON1)
(VFD)
2
Remote control
sensor
USB (Front)
(POWER)
(On/standby)
OPERATION (Side B)
(VFD)
(POWER)
6
30
A B C D E F G H I J
BD-S473
1 ■ SCHEMATIC DIAGRAMS
FOR INFORMATION ONLY (COMPONENT PARTS NOT AVAILABLE)
MAIN 1/10
CNT
OPWRSB
OPWRSB 6/10
RESET#
RESET# 6/10
OFF_MUTE
OFF_MUTE 8/10
33V_OK
33V_OK 5/10
to Power supply unit_CON2

2
VCC
J1 mark power net at connector bot VCC 5V_STB Close to DC-DC
PS_ON# NC16 VCC_1.15 FB4 BLM21P C63 10uF/10V/X5R
TP5 7 P1_GND
5V_STB BEAD/SMD/0805 C0805/SMD
TP6 6 5V_STB NC0805/SMD
C26 C32 C23 C62 0.1uF/10V C64 10uF/10V/X5R
5 VCC 0.1uF/10V 10uF/10V 0.1uF/10V C0805/SMD TDK VLC6045T-1R5N 1.5uH
TP1 4 VCC
C0805/SMD C65 0.1uF/10V U1 Close to DC-DC
NC22 NC0805/SMD 1.15V
3 R15
TP2 2 P12V 2.4K 7 2 LP1 1.5uH_4A NC21 NC0805/SMD TP20
TP3 1 P12V PVIN LX L/IND/SMD/VLC6045
P12V C80 C81 C82 C79 C78
RP34 10
7P,2mm 6 C66 C67 R41 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 10uF/6.3V/X5R 10uF/6.3V/X5R + CE5
SVIN 10uF/10V/X5R 10uF/10V/X5R 27.5K_1% C0805/SMD C0805/SMD 220uF/6.3V/NC
C25 EN_1.15 R0603/SMD 4 C0805/SMD C0805/SMD
0.1uF/16V EN FB_1.15 FB_1.15
3 NC FB 5
1 NC17 AIM 1.15V: 0.6*(27.5+30)/30=1.15V
NC 1.15V power range: 1.0V~1.195V;
9 TP PGND 8 NC0805/SMD
R39 1.15V
R44 C83 30K_1%
10K 0.1uF/10V/NC G5676F11U P1_GND
3 P1_GND P1_GND C84

10uF/6.3V/X5R
C85
10uF/6.3V/X5R
C86
10uF/6.3V/X5R
POWER CONNECTOR C0805/SMD C0805/SMD C0805/SMD
STBY 3.3V POWER

5V_STB U5 3.3V_STB TP10
1 VIN VOUT 5 1.5V POWER
C3 VCC C48 0.1uF/10V

2.2uF/10V/X5R 2
C0603/SMD GND C24 NC14 VCC_1.5 FB3 BLM21P C59 0.1uF/10V
1uF/6.3V NC0805/SMD BEAD/SMD/0805
3 4 C0603/SMD Close to DC-DC
EN NC Close to LDO U7 C52 10uF/10V/X5R P2_GND
C0805/SMD
G9091-330T11U R13 10K 1 8 C57 10uF/10V/X5R NC13 NC0805/SMD 1.5V
SOT-25/SMD VCC VIN C0805/SMD
7 L3 2.2uH/LQH6PPN2R2N43 NC15 NC0805/SMD
LX DC Current: 4.1A
TP14
EN_1.5 5 EN FB_1.5 Saturation Current: 6.4A C46 C42 C47 C60 C54 C68
FB 4 DC resistor: 15mOHM
C58 R8 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 10uF/6.3V/X5R 10uF/6.3V/X5R 10uF/6.3V/X5R + CE3
4 R90 C50
3 GND
REF 2
C45
10uF/10V/X5R 10uF/10V/X5R 13.3K_1% C0805/SMD C0805/SMD C0805/SMD 220uF/6.3V/NC
51K C43 C0805/SMD C0805/SMD
0.1uF/10V/NC 9 6 0.1uF/10V
TP PGND FB_1.5 AIM 1.5V: 0.8*(13.3+15)/15=1.509V
1.5V power range: 1.425V~1.575V;
P2_GND G5693 P2_GND NC12 NC0805/SMD
R95
15K_1%
P2_GND
POWER CONTROL
3.3V POWER 3.3V_STB 5V_STB CIRCUIT
C49 10uF/10V/X5R
C0805/SMD 3.3V
VCC U8 G966A R22 R98
TP16 10K 100K/NC
NC11 4 5
VPP NC R97 C61 C51 C56
NC0603/SMD
3 6 15K_1% 0.1uF/6.3V 10uF/6.3V/X5R 10uF/6.3V/X5R
VIN VO C0805/SMD C0805/SMD OPWRSB R79 0 PS_ON#
5 DC_EN 2 VEN ADJ 7 AIM 3.3V: 0.8*(15+4.75)/4.75=3.326V
2
3.3V power range: 3.0V~3.6V;
33V_OK 1 8 R82 R88 R14 1K/NC 1 Q12
POK GND 4.75K_1% 10K_NC 2N3904/NC
TP 9
3
TP17
H101
M1 M2 M3 M4 1
1
J504
GND
GND
GND
GND
2 BRACKET
2
1
2
3
4
SCREW_1MM/NC SCREW_1MM/NC SCREW_1MM/NC SCREW_1MM/NC Heatsink-MT8555
1
1
2
3
4
M5 M6 M7 M8 HA1 HA2 DING1 DING2 DING3 DING4
Heatsink is must,
size suggest above 30mm*30mm*20mm; MARK1 MARK1 MARK1 MARK1 S/N LOGO DING DING DING DING
6 M IC Tc must below 95 degree;
3.3V_STB 3.3V_STB RESET CIRCUIT
VCC VCC POWER CONTROL

CIRCUIT
Select drop off quickly
normal power net
R40 D2
2
10K 1N4148/SMD/NC R77 R63 R65

C70 15K_1% 100K
VCC
Resistor value can tune

3.3K
0.1uF
for best power sequence;
POR RESET# 3 R51 0 RESET# R66 100 OFF_MUTE

OFF_MUTE for quickly audio
DC_EN TP18
DC_EN for 3.3V drop off
2
mute when AC OFF; faster than 1.15V;

GND
C71 Close to 1 Q13 1 Q14 C55

0.1uF R67 2N3904 2N3904 0.1uF/10V
MT8530 R59
Vcc U6 2.74K_1%
1K
1
2 G691L293T73U
SOT23/SMD ★ Components having special characteristics are marked and must be replaced
7 1 3
VCC
5.000V
R/R to Q1.b
0.772V with parts having specifications equal to those originally installed.
4.532V 0.700V
GND Reset#
G691L
3.885V
3.237V
0.600V
0.500V ★ Schematic diagram is subject to change without notice.
31
A B C D E F G H I J
BD-S473
MAIN 2/10
1.5V DDR U101 U102 A_DQS1
A_DQS1#
TP102 TEST POINT SMD0.6
U100A A_DQ3 E3 N3 A_RA0 A_DQ18 E3 N3 A_RA0_2R
AA25
AE10
DVCC18_IO_1 CHA A_DQ7
A_DQ1
F7
F2
DQ0
DQ1
A0
A1 P7
P3
A_RA1
A_RA2
A_DQ23
A_DQ19
F7
F2
DQ0
DQ1
A0
A1 P7
P3
A_RA1_2R
A_RA2_2R A_DQS0
DVCC18_IO_1 DQ2 A2 DQ2 A2 TP104 TEST POINT SMD0.6
AF14 A_DQ6 F8 N2 A_RA3 A_DQ21 F8 N2 A_RA3_2R A_DQS0#
DVCC18_IO_1 DQ3 A3 DQ3 A3 TP105 TEST POINT SMD0.6
AE17 AG17 A_DQ0 A_DQ0 H3 P8 A_RA4 A_DQ16 H3 P8 A_RA4_2R
DVCC18_IO_1 RDQ0 A_DQ1 A_DQ5 DQ4 A4 A_RA5 A_DQ20 DQ4 A4 A_RA5_2R
AF20 DVCC18_IO_1 RDQ1 AF18 H8 DQ5 A5 P2 H8 DQ5 A5 P2
AG26 AE18 A_DQ2 A_DQ2 G2 R8 A_RA6 A_DQ17 G2 R8 A_RA6_2R A_DQS3
DVCC18_IO_1 RDQ2 DQ6 A6 DQ6 A6 TP106 TEST POINT SMD0.6
AF13 AF19 A_DQ3 A_DQ4 H7 R2 A_RA7 A_DQ22 H7 R2 A_RA7_2R A_DQS3#
P26 AC22 A_DQ4 A_DQ15 D7 T8 A_RA8 A_DQ29 D7 T8 A_RA8_2R
DVCC18_IO_1 RDQ4 A_DQ5 A_DQ11 DQ8 A8 A_RA9 A_DQ26 DQ8 A8 A_RA9_2R
V26 DVCC18_IO_1 RDQ5 AF23 C3 DQ9 A9 R3 C3 DQ9 A9 R3
R25 AF22 A_DQ6 A_DQ12 C8 L7 A_RA10 A_DQ31 C8 L7 A_RA10_2R A_DQS2
DVCC18_IO_1 RDQ6 DQ10 A10/AP DQ10 A10/AP TP108 TEST POINT SMD0.6
V21 AG22 A_DQ7 A_DQ9 C2 R7 A_RA11 A_DQ27 C2 R7 A_RA11_2R A_DQS2#
T21 AH19 A_DQ8 A_DQ13 A7 N7 A_RA12 A_DQ28 A7 N7 A_RA12_2R
2 AA13
DVCC18_IO_1
DVCC18_IO_1
RDQ8
RDQ9 AG19 A_DQ9
A_DQ10
A_DQ8
A_DQ14
A2
DQ12
DQ13
A12/BC#
A13 T3 A_RA13 A_DQ24
A_DQ30
A2
DQ12
DQ13
A12/BC#
A13 T3 A_RA13_2R
AA15 DVCC18_IO_1 RDQ10 AC20 B8 DQ14 B8 DQ14
AA19 AD20 A_DQ11 A_DQ10 A3 J1 A_DQ25 A3 J1
DVCC18_IO_1 RDQ11 A_DQ12 DQ15 NC_0 DQ15 NC_0
AA11 DVCC18_IO_1 RDQ12 AE22 NC_1 J9 NC_1 J9
Y20 AH22 A_DQ13 L1 L1
DVCC18_IO_1 RDQ13 A_DQ14 A_DQS1 NC_2 A_DQS3 NC_2
AA17 DVCC18_IO_1 RDQ14 AD22 C7 UDQS NC_3 L9 C7 UDQS NC_3 L9
P21 AF21 A_DQ15 A_DQS1# B7 M7 A_DQS3# B7 M7
DVCC18_IO_1 RDQ15 A_DQ16 A_DQS0 UDQS# NC_4 A_DQS2 UDQS# NC_4
M21 DVCC18_IO_1 RDQ16 AG7 F3 LDQS NC_6 T7 F3 LDQS NC_6 T7
AH7 A_DQ17 A_DQS0# G3 A_DQS2# G3
RDQ17 A_DQ18 A_DQM1 LDQS# A_BA0 A_DQM3 LDQS# A_BA0_2R
RDQ18 AH8 D3 UDM BA0 M2 D3 UDM BA0 M2
1.15V AG8 A_DQ19 A_DQM0 E7 N8 A_BA1 A_DQM2 E7 N8 A_BA1_2R
RDQ19 A_DQ20 DDR_VREF LDM BA1 A_BA2 LDM BA1 A_BA2_2R
RDQ20 AF12 BA2 M3 BA2 M3
R101 0 AVDD12_MEMPLL A_DQ21 D_CLK0 D_CLK1
AE23 AVDD12_MEMPLL RDQ21 AE12 CK J7 CK J7
R0603/SMD AD23 AC12 A_DQ22 DDR_VREF H1 K7 D_CLK0# DDR_VREF H1 K7 D_CLK1#
C101 C102 AVSS12_MEMPLL RDQ22 A_DQ23 VREFDQ CK# A_CS# VREFDQ CK# A_CS#_2R
RDQ23 AD12 M8 VREFCA CS# L2 M8 VREFCA CS# L2
NS 0.1uF/6.3V/X7R AE8 A_DQ24 C103 A_RRESET# T2 K3 A_CAS# C104 A_RRESET#_2R T2 K3 A_CAS#_2R
C0603/SMD C0402/SMD RDQ24 A_DQ25 0.1uF/6.3V/X7R RESET# CAS# A_ODT 0.1uF/6.3V/X7R RESET# CAS# A_ODT_2R
TP100 AE24 TP_MEMPLL RDQ25 AF8 L8 ZQ ODT K1 L8 ZQ ODT K1
AF24 AE9 A_DQ26 C0603/SMD J3 A_RAS# C0603/SMD J3 A_RAS#_2R
TP101 TN_MEMPLL RDQ26 RAS# RAS#
AF9 A_DQ27 L3 A_WE# L3 A_WE#_2R
RDQ27 A_DQ28 R102 WE# A_CKE R100 WE# A_CKE_2R
RDQ28 AH11 CKE K9 CKE K9
AG11 A_DQ29 240 240
RDQ29 A_DQ30 R0402/SMD R0402/SMD
RDQ30 AF11
AE11 A_DQ31 B1 B1
RDQ31 1.5V VSSQ_0 1.5V VSSQ_0
AA26 DGND VSSQ_1 B9 VSSQ_1 B9
3 AA12
L11
DGND
A1
VSSQ_2 D1
D8 A1
VSSQ_2 D1
D8
DGND VDDQ_0 VSSQ_3 VDDQ_0 VSSQ_3
M10 DGND A8 VDDQ_1 VSSQ_4 E2 A8 VDDQ_1 VSSQ_4 E2
K10 AE21 A_DQM0 C1 E8 C1 E8
DGND RDQM0 A_DQM1 VDDQ_2 VSSQ_5 VDDQ_2 VSSQ_5
N11 DGND RDQM1 AD21 C9 VDDQ_3 VSSQ_6 F9 C9 VDDQ_3 VSSQ_6 F9
P10 AD10 A_DQM2 D2 G1 D2 G1
DGND RDQM2 A_DQM3 VDDQ_4 VSSQ_7 VDDQ_4 VSSQ_7
L13 DGND RDQM3 AD9 E9 VDDQ_5 VSSQ_8 G9 E9 VDDQ_5 VSSQ_8 G9
R11 DGND F1 VDDQ_6 F1 VDDQ_6
L15 DGND H2 VDDQ_7 VSS_0 A9 H2 VDDQ_7 VSS_0 A9
T10 AG20 A_DQS0 H9 B3 H9 B3
DGND RDQS0 A_DQS0# VDDQ_8 VSS_1 VDDQ_8 VSS_1
U11 DGND RDQS0_ AH20 VSS_2 E1 VSS_2 E1
M12 DGND B2 VDD_0 VSS_3 G8 B2 VDD_0 VSS_3 G8
M13 AH21 A_DQS1 D9 J2 D9 J2
DGND RDQS1 A_DQS1# VDD_1 VSS_4 VDD_1 VSS_4
M14 DGND RDQS1_ AG21 G7 VDD_2 VSS_5 J8 G7 VDD_2 VSS_5 J8
M15 DGND K2 VDD_3 VSS_6 M1 K2 VDD_3 VSS_6 M1
M17 AG9 A_DQS2 K8 M9 K8 M9
AA14 DGND RDQS2_ AH9 N1 VDD_5 VSS_8 P1 N1 VDD_5 VSS_8 P1
V10 DGND N9 VDD_6 VSS_9 P9 N9 VDD_6 VSS_9 P9
N12 AH10 A_DQS3 R9 T1 R9 T1
N13 DGND RDQS3_ AG10 R1 VDD_7 VSS_11 T9 R1 VDD_7 VSS_11 T9
N14 DGND
N15 DGND
N16 DGND
W11 AC14 A_ODT
DGND RODT A_CAS#
4 P12
P13
DGND
DGND
RCAS_
RRAS_
AD14
AC13 A_RAS#
P14 AE15 A_CS# IC DDR3 x16 FBGA-96 IC DDR3 x16 FBGA-96
DGND RCS_ A_WE#
P15 DGND RWE_ AE13
P17 AG16 A_CKE
DGND RCKE A_RRESET#
K12 DGND RRESET AC16
R12 DGND
R13 DGND
R14 AG14 A_BA0
R15
R16
DGND
DGND
RBA0
RBA1 AD19
AC15
A_BA1
A_BA2
DDRA CLK 1.5V 1.5V
DGND RBA2
T13 DGND
T15 A_CLK0# R103 0 D_CLK0# A_CLK1# R104 0 D_CLK1#
DGND C137
T17 DGND R0402/SMD R0402/SMD
T12 AD13 A_RA0 close to DRAM close to DRAM C129 R109 0.1uF/6.3V/X7R R111
DGND RA0 A_RA1 R105 R106 0.1uF/6.3V/X7R 100 C0603/SMD 100/NC
V12 DGND RA1 AE19
U12 AF16 A_RA2 close to IC 100_1% close to IC 100_1% C0603/SMD R0603/SMD DDR_VREF R0603/SMD DDRIC_VREF
DGND RA2 A_RA3 R0402/SMD R0402/SMD
U14 DGND RA3 AH14
U16 AD18 A_RA4 DDR_VREF R112 0
DGND RA4 A_RA5 A_CLK0 R107 0 D_CLK0 A_CLK1 R108 0 D_CLK1
U13 DGND RA5 AD15 R0603/SMD
W13 AC17 A_RA6 R0402/SMD R0402/SMD
DGND RA6 A_RA7 R113
K14 DGND RA7 AE16
T14 AH16 A_RA8 C130 R110 C131 100/NC C134
DGND RA8 A_RA9 0.1uF/6.3V/X7R 100 0.1uF/6.3V/X7R R0603/SMD 0.1uF/6.3V/X7R
V14 DGND RA9 AF15
U15 AH17 A_RA10 C0603/SMD R0603/SMD C0603/SMD C0603/SMD
5 W15
DGND
DGND
RA10
RA11 AD17 A_RA11
A_RA12
K16 DGND RA12 AC18
M16 AD16 A_RA13
DGND RA13
P16 DGND
T16 DGND
V16 AG24 A_CLK0
DGND RCLK0 A_CLK0# A_RA2 RN100 A_RA2_2R
L17 DGND RCLK0_ AH24 2 1 0x4
N17 A_RA0 4 3 A_RA0_2R
DGND A_CLK1 A_BA2 A_BA2_2R
R17 AG13 6 5
U17
W17
DGND
DGND
RCLK1
RCLK1_ AH13 A_CLK1#
DDRIC_VREF
A_WE#
RN0402/SMD
8 7 A_WE#_2R
1.5V IC/DDRA 1.5V POWER C
DGND
AF10 DGND
K18 AB12 A_CS# RN101 2 1 0x4 A_CS#_2R
DGND RVREF_1 A_BA0 A_BA0_2R
M18 DGND RVREF_2 AA20 4 3
P18 C132 C133 A_RA3 6 5 A_RA3_2R C105 C106 C107 C108 C109 C110 C111 C112 C113
DGND 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R A_RA5 A_RA5_2R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
T18 DGND 8 7
V18 C0402/SMD C0603/SMD RN0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD
DGND
L19 DGND
N19 RN102 2 1 0x4
DGND A_RAS# A_RAS#_2R
R19 DGND 4 3
U19 A_ODT 6 5 A_ODT_2R
DGND A_CAS# A_CAS#_2R
AE20 DGND 8 7
N25 RN0402/SMD 1.5V
DGND
V25 DGND
6 AF17
AE14
DGND
A_RA13
A_RRESET#
RN103 2
4
1 0x4
3
A_RA13_2R
A_RRESET#_2R
DGND A_RA9 A_RA9_2R C114 C115 C116 C117 C118 C119 C120 C121 C122
AA16 DGND 6 5
AF26 A_RA7 8 7 A_RA7_2R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
DGND RN0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD
R26 DGND
M11 DGND
W9 A_CKE RN104 2 1 0x4 A_CKE_2R
DGND A_RA10 A_RA10_2R
U9 DGND 4 3
AB11 A_BA1 6 5 A_BA1_2R
DGND A_RA12 A_RA12_2R
W19 DGND 8 7
U21 RN0402/SMD 1.5V
DGND
N21 DGND
R21 A_RA4 RN105 2 1 0x4 A_RA4_2R
DGND A_RA1 A_RA1_2R C124 C125 C126 C127 C128 C100 C123
W21 DGND 4 3
L21 A_RA6 6 5 A_RA6_2R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
DGND A_RA8 A_RA8_2R C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD
N9 DGND 8 7
AA18 RN0402/SMD
DGND
MT8555_0825_A A_RA11 R114 0 A_RA11_2R
R0402/SMD
★ Components having special characteristics are marked and must be replaced

7 with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
32
A B C D E F G H I J
BD-S473
MAIN 3/10
U150
1.15V
U100B
DDR B_DQ1 E3 N3 B_RA0 B_DQ19
DQ0 A0 TP152 TEST POINT SMD0.6
L10 T25 B_DQ0 B_DQ6 F7 P7 B_RA1 B_DQ23 TEST POINT SMD0.6
W18
M9
DVCC10_K
DVCC10_K
RDQ0_B
RDQ1_B T26
U26
B_DQ1
B_DQ2
CHB B_DQ0
B_DQ7
F2
F8
DQ1
DQ2
A1
A2 P3
N2
B_RA2
B_RA3
B_DQ16
B_DQ21
TP159
DVCC10_K RDQ2_B DQ3 A3 TP160 TEST POINT SMD0.6
W10 U25 B_DQ3 B_DQ3 H3 P8 B_RA4 B_DQ17 TEST POINT SMD0.6
DVCC10_K RDQ3_B DQ4 A4 TP165
P11 M26 B_DQ4 B_DQ5 H8 P2 B_RA5 B_DQ22 TEST POINT SMD0.6
V9 M25 B_DQ5 B_DQ2 G2 R8 B_RA6 B_DQ18 TEST POINT SMD0.6
M19 N28 B_DQ6 B_DQ4 H7 R2 B_RA7 B_DQ20 TEST POINT SMD0.6
N10 N27 B_DQ7 B_DQ13 D7 T8 B_RA8 B_DQ28 TEST POINT SMD0.6
T11 P23 B_DQ8 B_DQ11 C3 R3 B_RA9 B_DQ27 TEST POINT SMD0.6
2 P19
R10
DVCC10_K RDQ9_B T28
T27
B_DQ9
B_DQ10
B_DQ15
B_DQ10
C8
C2
DQ10 A10/AP L7
R7
B_RA10
B_RA11
B_DQ31
B_DQ25
DVCC10_K RDQ10_B DQ11 A11 TP168 TEST POINT SMD0.6
V11 T23 B_DQ11 B_DQ12 A7 N7 B_RA12 B_DQ29 TEST POINT SMD0.6
DVCC10_K RDQ11_B DQ12 A12/BC# TP172
K11 N26 B_DQ12 B_DQ9 A2 T3 B_RA13 B_DQ26 TEST POINT SMD0.6
L12 P24 B_DQ13 B_DQ14 B8 B_DQ30 TEST POINT SMD0.6
DVCC10_K RDQ13_B DQ14 TP170
T19 N23 B_DQ14 B_DQ8 A3 J1 B_DQ24 TEST POINT SMD0.6
DVCC10_K RDQ14_B DQ15 NC_0 TP171
K13 N24 B_DQ15 J9
DVCC10_K RDQ15_B B_DQ16 NC_1 B_DQM3
V13 DVCC10_K RDQ16_B AF25 NC_2 L1 TP174 TEST POINT SMD0.6
K15 AG25 B_DQ17 B_DQS1 C7 L9 B_DQM2
DVCC10_K RDQ17_B UDQS NC_3 TP175 TEST POINT SMD0.6
L14 AH25 B_DQ18 B_DQS1# B7 M7
DVCC10_K RDQ18_B B_DQ19 B_DQS0 UDQS# NC_4 B_DQS3
U10 DVCC10_K RDQ19_B AH26 F3 LDQS NC_6 T7 TP155 TEST POINT SMD0.6
K17 AA24 B_DQ20 B_DQS0# G3 B_DQS3#
DVCC10_K RDQ20_B LDQS# TP156 TEST POINT SMD0.6
V15 AB24 B_DQ21 B_DQM1 D3 M2 B_BA0
DVCC10_K RDQ21_B B_DQ22 B_DQM0 UDM BA0 B_BA1 B_DQS2
L16 DVCC10_K RDQ22_B AA23 E7 LDM BA1 N8 TP157 TEST POINT SMD0.6
K19 AB23 B_DQ23 DDR_VREF M3 B_BA2 B_DQS2#
DVCC10_K RDQ23_B BA2 TP158 TEST POINT SMD0.6
V17 AD25 B_DQ24 J7 D_CLK2
DVCC10_K RDQ24_B B_DQ25 DDR_VREF CK D_CLK2# B_CLK1#
V19 DVCC10_K RDQ25_B AE25 H1 VREFDQ CK# K7 TP176 TEST POINT SMD0.6
L18 AH27 B_DQ26 M8 L2 B_CS# B_CLK1
DVCC10_K RDQ26_B VREFCA CS# TP177 TEST POINT SMD0.6
N18 AH28 B_DQ27 C166 B_RRESET# T2 K3 B_CAS#
DVCC10_K RDQ27_B B_DQ28 0.1uF/6.3V/X7R RESET# CAS# B_ODT
R18 DVCC10_K RDQ28_B AC25 L8 ZQ ODT K1
U18 AD24 B_DQ29 C0603/SMD J3 B_RAS#
DVCC10_K RDQ29_B B_DQ30 R151 RAS# B_WE#
W12 DVCC10_K RDQ30_B AC24 WE# L3
W14 AC23 B_DQ31 240 K9 B_CKE
DVCC10_K RDQ31_B CKE
3 W16 DVCC10_K
R0402/SMD
P25 B_DQM0 B1
RDQM0_B B_DQM1 1.5V VSSQ_0
RDQM1_B R24 VSSQ_1 B9
AD26 B_DQM2 D1
RDQM2_B B_DQM3 VSSQ_2
RDQM3_B AE26 A1 VDDQ_0 VSSQ_3 D8
A8 VDDQ_1 VSSQ_4 E2
R27 B_DQS0 C1 E8
RDQS0_B B_DQS0# VDDQ_2 VSSQ_5
RDQS0__B R28 C9 VDDQ_3 VSSQ_6 F9
D2 VDDQ_4 VSSQ_7 G1
P28 B_DQS1 E9 G9
RDQS1_B B_DQS1# VDDQ_5 VSSQ_8
RDQS1__B P27 F1 VDDQ_6
H2 VDDQ_7 VSS_0 A9
AG27 B_DQS2 H9 B3
RDQS2_B B_DQS2# VDDQ_8 VSS_1
RDQS2__B AG28 VSS_2 E1
B2 VDD_0 VSS_3 G8
AF28 B_DQS3 D9 J2
RDQS3_B B_DQS3# VDD_1 VSS_4
RDQS3__B AF27 G7 VDD_2 VSS_5 J8
K2 VDD_3 VSS_6 M1
AD27 B_ODT K8 M9
RODT_B B_CAS# VDD_4 VSS_7
RCAS__B AC26 N1 VDD_5 VSS_8 P1
AD28 B_RAS# N9 P9
RRAS__B B_CS# VDD_6 VSS_9
RCS__B AB25 R9 VDD_8 VSS_10 T1
4 RWE__B AE28
V27
B_WE#
B_CKE
R1 VDD_7 VSS_11 T9
RCKE_B B_RRESET#
RRESET_B Y26
AB26 B_BA0
RBA0_B B_BA1
RBA1_B T24
W25 B_BA2
RBA2_B IC DDR3 x16 FBGA-96
AE27 B_RA0
RA0_B B_RA1
RA1_B U24
W28 B_RA2
RA2_B B_RA3
AA27
RA3_B
RA4_B V24
AA28
B_RA4
B_RA5
DDRA CLK
RA5_B B_RA6 B_CLK0# R153 0 D_CLK2#
RA6_B W24
W27 B_RA7 R0402/SMD close to DRAM
RA7_B B_RA8 R154
RA8_B Y24
W26 B_RA9 close to IC 100_1%
RA9_B B_RA10 R0402/SMD
RA10_B V28
V23 B_RA11 B_CLK0 R156 0
RA11_B B_RA12
RA12_B U23 R0402/SMD
Y25 B_RA13
RA13_B
5 RCLK0_B L27
L28
B_CLK0
B_CLK0# B_DQS1
RCLK0__B TP151 TEST POINT SMD0.6
B_DQS1#
AB27 B_CLK1
RCLK1_B B_CLK1# B_DQS0
RCLK1__B AB28 TP153 TEST POINT SMD0.6
B_DQS0#
RVREF_3 AA21 DDRIC_VREF DDRIC_VREF
RVREF_4 R23
C168 C169
0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
MT8555_0825_A C0402/SMD C0402/SMD
1.15V IC 1.15V POWER C 1.5V

IC/DRAM 1.5V POWER C
6
C151 C152 C159 C153 C154 C177 C178 C180 C181 C182 C183
0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD
1.15V 1.5V
C157 C155 C156 C160 C158 C186 C187 C188 C192 C193
0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R
C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD
1.15V 1.5V
C161 C162 C163 C164 C165 C170 C172 C175 C194

0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R ★ Components having special characteristics are marked and must be replaced
7 C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0402/SMD C0603/SMD C0603/SMD C0402/SMD
with parts having specifications equal to those originally installed.
33
A B C D E F G H I J
BD-S473
MAIN 4/10
AUDIO I2S
IC VIDEO MODULE POWER C AVDD33_VDAC_R F18
U100C
C12 AOMCLK
HDMI TX PORT AOLRCK
AVDD33_VDAC_R AOMCLK close to connector AOLRCK 6/10, 8/10
G17 A12 AOBCK AOBCK
AVSS33_VDAC_R AOBCK TMDS differential impedance 100 OHM AOBCK 8/10
3.3V AOLRCK D200 AOMCLK
23
22
AOLRCK B12 AOMCLK 8/10
AVDD33_VDAC_X AOSDATA0 MTK suggest W/S/GS=5/7/20 RClamp0524J J200
E19 AVDD33_VDAC_X AOSDATA0 C11
R208 0 AVDD33_VDAC_R F19 D11 AOSDATA1 TX2+ 1 1 F_TX2+
AVSS33_VDAC_X AOSDATA1 8 8 1 D2+
ESD
D12 AOSDATA2 TX2- 2 2
C202 AVDD33_VDAC_BG AOSDATA2 AOSDATA3 7 7 F_TX2-
2 GND
AOSDATA4
D19 E10 TP205 9 GND 3
2 0.1uF/6.3V/X7R E18
AVDD33_VDAC_BG
AVSS33_VDAC_BG
AOSDATA3
AOSDATA4 F10 AOSDATA4 TX1+
TX1-
3 3 6 6
F_TX1+ 4
D2-
D1+
AOSDATA2
AOSDATA4 8/10
4 4 5 5 5 GND AOSDATA2 6/10
AVDD33_XTAL C15 F_TX1- 6 AOSDATA1
AVDD33_XTAL D1- AOSDATA1 6/10
3.3V D15 E13 SPDIF F_TX0+ 7 AOSDATA0
AVSS33_XTAL SPDIF D0+ AOSDATA0 6/10, 8/10
TX0+ 1 8 8
1 8 GND
ESD
R207 0 AVDD33_VDAC_X AVDD12_DMPLL F15 TX0- 2 7 F_TX0- 9 SPDIF VIDEO
AVDD12_DMPLL MCIN R209 0 2 7 F_TXC+
D0-
F14 E12 9 10
C204 AVSS12_DMPLL MCIN TXC+ 3
GND
6 11
CK+ HDMI SPDIF
SPDIF 7/10
0.1uF/6.3V/X7R AVDD12_APLL TXC- 3 6 F_TXC-
GND
VDACX_OUT
G15 AVDD12_APLL 4 4 5 5 12 CK- VDACX_OUT 7/10
G14 D10 AMUTE HDMI-CECT 13 VDACR_OUT
AVSS12_APLL AMUTE CEC VDACR_OUT 7/10
D201 TP203 14 VDACG_OUT
DIR VDACG_OUT 7/10
3.3V AVDD12_27MPLL E15 RClamp0524J HDMI_SCL 15 VDACB_OUT
AVDD12_27MPLL SCL VDACB_OUT 7/10
E14 C19 VDACX_OUT HDMI_SDA 16
R210 0 AVDD33_VDAC_BG AVSS12_27MPLL VDACX_OUT VDACR_OUT
SDA
VDACR_OUT C18 17 GND
VDACG_OUT A19 VDACG_OUT D228 PTS0603V24T500 18 VCC MISC
C206 B19 VDACB_OUT 2 1 HTPLG 19 HPD
0.1uF/6.3V/X7R TXP VDACB_OUT AMUTE
TEST POINT SMD0.6 TP201 C14 TP_PLLG AMUTE 6/10, 8/10
TEST POINT SMD0.6 TP202 TXN D14 D18 FS R211 560_1% 5V_STBY_DDC F201 500mA HDMI_VCC HDMI-TYPE-A
20
21
TN_PLLG FS
EDID PSW
E16 AVDD12_HDMI_TX C232 C211
AVDD12_HDMI_TX 0.1uF/10V EDID_PSW
AVDD12_HDMI_TX D16 EDID_PSW 6/10
G16 4.7uF/10V/NC
AVSS12_HDMI_TX
3 AVSS12_HDMI_TX F16
1.15V IC PLL POWER C NS_XTALI A13 NS_XTALI AVDD33_HDMI_TX C17

D17
AVDD33_HDMI_TX
R216 0 AVDD12_DMPLL AVDD33_HDMI_TX

AVSS33_HDMI_TX E17
F17
C217
0.1uF/6.3V/X7R
AVSS33_HDMI_TX
HDMI POWER 1.15V
AVDD12_HDMI_TX R212 0
1.15V A16 TX0- C207 C212
NS_XTALO CH0_M TX0+ 0.1uF/6.3V/X7R 10uF/6.3V/X5R
B13 NS_XTALO CH0_P B16
R217 0 AVDD12_APLL
A15 TX1-
C219 CH1_M TX1+
CH1_P B15
0.1uF/6.3V/X7R 3.3V
A14 TX2-
CH2_M TX2+ AVDD33_HDMI_TX R214 0
CH2_P B14
1.15V
A17 TXC- C214 C215
R219 0 AVDD12_27MPLL CLK_M TXC+ 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R
CLK_P B17
C222 D25 HTPLG C229 100pF/6.3V/NC 5V_STBY_DDC

4 0.1uF/6.3V/X7R HTPLG
2
C24 CEC R240 100K
CEC D226
D24 HDMISD R215 PTS0603V24T500
HDMISD HDMISCK 1.8K
HDMISCK C25
A18 EXT_CAP
3.3V_STB CEC
TP204
1
EXT_CAP EXT_RES R222 2.49K_1% R218 27K HDMISCK HDMI_SCL
B18
3.3V_STB
IC XTAL POWER C EXT_RES
D202 HDMISD HDMI_SDA
R213 0 AVDD33_XTAL RLS4148 N TE-11
2
C210 CEC R220 0 HDMI-CECT R231 D225
0.1uF/6.3V/X7R G11 1.8K PTS0603V24T500
SPBCK C223 D227
SPDATA F13
F12 15pF/NC 2 1
SPLRCK
F11
1
SPMCLK PTS0603V24T500/NC 5V_STBY_DDC
MT8555_0825_A HDMI DDC

C225 22pF/6.3V/NPO NS_XTALI
5
Y202
R258
1M
27M_20p
C230 22pF/6.3V/NPO R257 10 NS_XTALO
5V_STBY_DDC EDID
SYSTEM CLK SOURCE 5V_STB
POWER
R242 0_NC
3 2 R243 10K_NC
Q201
DMP3098L
1
3.3V_STB R225
6 100K
R224
10K
R223
10K_NC C947
0.01uF
2
EDID_PSW 1 Q202
2N3904
3
R227 R226
10K_NC NC

34
A B C D E F G H I J
BD-S473
MAIN 5/10
3.3V
U100E 48
U301
1
NAND FLASH
3.3V NC NC
J13 DVCC33_IO_5 STXN W2 47 NC NC 2
J14 DVCC33_IO_5 STXP W1
R302 0
46 NC NC 3 HW TRAPPING
Y8 DVCC33_IO_2 45 NC NC 4
AA8 Y2 R0603/SMD NFD7 44 5 NFWEN
DVCC33_IO_2 SRXP I/O7 NC NFWEN 6/10
J18 Y1 C300 C301 NFD6 43 6 NFRBN2 NFREN
DVCC33_IO_3 SRXN I/O6 SE NFREN 6/10
J19 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R NFD5 42 7 NFRBN
DVCC33_IO_3 C0402/SMD C0603/SMD NFD4 I/O5 R/B NFREN NFCEN
N8 DVCC33_IO 41 I/O4 RE 8 NFCEN 6/10
P8 Y4 SREXT R306 453_1% 40 9 NFCEN NFCEN2
DVCC33_IO SREXT NC CE NFCEN2 6/10
T8 R0603/SMD 1.15V 39 10 NFCEN2
DVCC33_IO NC NC NFCLE
38 NC NC 11 NFCLE 6/10
Y5 AVDD33_SATA R307 0 C339 3.3V 37 12 3.3V C350 NFALE
AVDD33_SATA VCC VCC NFALE 6/10
Y3 AVDD12_SATA1 R0603/SMD 0.1uF/6.3V 36 13 0.1uF/6.3V
AVDD12_SATA1 VSS VSS
2 TP592
SFCS AH5
AVSS12_SATA1 W6 AVSS12_SATA1 C302
0.1uF/6.3V/X7R
C303
4.7uF/6.3V/X5R
35
34
NC NC 14
15
ETH
SFCK SFCS C0402/SMD C0603/SMD NC NC NFCLE
TP593 AF5 SFCK 33 NC CLE 16
SFDI AG5 NFD3 32 17 NFALE ETLEDLINK
TP594 SFDI I/O3 ALE ETLEDLINK 6/10
SFDO AH4 3.3V NFD2 31 18 NFWEN ETLEDSPEED
TP595 SFDO I/O2 WE ETLEDSPEED 6/10
NFD1 30 19 NFWP# ETLEDDUPLEX
I/O1 WP ETLEDDUPLEX 6/10
AA3 AVDD33_USB_1P_1 R0603/SMD R300 0 NFD0 29 20
AVDD33_USB_1P_1 I/O0 NC
NFALE AF4 NFALE AVDD33_USB_2P_2 AA4 AVDD33_USB_2P_2 R0603/SMD R310 0 28 NC NC 21 MISC
NFCEN AH2 27 22
NFCLE NFCEN C306 C307 C308 C309 NC NC SCL
AG3 NFCLE 26 NC NC 23 SCL
NFRBN AE3 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 25 24 SDA
NFRBN NC NC SDA
NFREN AD4 AA6 C0402/SMD C0603/SMD C0402/SMD C0603/SMD
NFWEN NFREN AVSS33_USB_1P_1 HY27UF082G2B 3.3V TGPIO5
AG4 NFWEN AVSS33_USB_2P_2 AA5 TGPIO5 6/10
NFCEN2 AD5 1.15V TSOP48/SMD TGPIO4
NFCEN2 TGPIO4 6/10
NFRBN2 AE4 NFRBN R325 4.7K
NFD0 NFRBN2 33V_OK
AG2 NFD0 33V_OK 1/10
NFD1 AH1 AB3 AVDD12_USB_1P_1 R0603/SMD R313 0 NFRBN2 R394 4.7K
NFD2 NFD1 AVDD12_USB_1P_1 AVDD12_USB_2P_1A R0603/SMD R314 0
AF3 NFD2 AVDD12_USB_2P_1A AC4
NFD3 AG1 NFCEN R391 4.7K/NC
NFD4 NFD3 C310 C311 C312 C313
AF2 NFD4
NFD5 AF1 AB6 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R NFCEN2 R337 4.7K/NC
NFD6 NFD5 AVSS12_USB_1P_1 C0402/SMD C0603/SMD C0402/SMD C0603/SMD
AE2 NFD6 AVSS12_USB_2P_1A AB5
NFD7 AE1 NFWP# R321 10K
NFD7
AB2 USBP0 R338 0 33V_OK
GPIO0 USB_1P_DP USBM0
3 GPIO1
F9
E9
GPIO0
GPIO1
USB_1P_DM AB1
R320 0/NC
GPIO2 G9 AC2 USBP1
GPIO3 GPIO2 USB_2P_DP1 USBM1
D9 GPIO3 USB_2P_DM1 AC1
GPIO4 AD6
GPIO5 GPIO4 USBP2
AE6 GPIO5 USB_2P_DP0 AD2
GPIO6 AE5 AD1 USBM2
GPIO7 GPIO6 USB_2P_DM0
AC7 GPIO7
AC3 USB_1P_VRT R322 5.1K_1% R0603/SMD
USB_1P_VRT USB_2P_VRT R324 5.1K_1% R0603/SMD
USB_2P_VRT AD3
1.15V
SCL B10
SDA SCL AVDD12_COM R0603/SMD R327 0 VCC
C10 AVDD12_COM E5
SDA
AVDD12_REC E6 AVDD12_REC R0603/SMD R328 0 FB314
BLM18P BEAD/SMD/0603
USB PORT0
C316 C317 C318 C319 USB_VCC0
0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R
U34
TDO AF6 F7 C0402/SMD C0603/SMD C0402/SMD C0603/SMD 3.3V
TRST_ TDO AVSS12_COM
AF7 TRST_ AVSS12_REC G7 IN
TDI AD8
TMS TDI R398 10K USB_EN0
AE7 TMS EN
USB_VCC0 voltage must assure 5V;
TCK AD7 3.3V
TCK R393 10K USB_OC0# VOUT
AVDD33_COM R0603/SMD R329 0 FLAG
AVDD33_COM C5
F5 AVDD33_REC R0603/SMD R330 0 CB305
4 AVDD33_REC
AVDD33_LD D4 AVDD33_LD R0603/SMD R331 0 GND 0.1uF/10V
C320 C321 C322 C323 C324 C325 RT9715EGB Close to Connector

EFPWRQ AC9 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R CB306
EFPWRQ C0402/SMD C0603/SMD C0402/SMD C0603/SMD C0402/SMD C0603/SMD 0.1uF/10V/NC
R332
0
R0603/SMD D5
AVSS33_COM VCC
AVSS33_LD C4
AVSS33_REC F6 FB311
BLM18P BEAD/SMD/0603
USB PORT1
USB_VCC1
B3 TXVN_0
TXVN_0 U33
A2 TXVP_0 3.3V
TXVP_0
TXVN_1 IN
TXVN_1 A4
B4 TXVP_1 R397 10K USB_EN1 USB_VCC1 voltage must assure 5V;
TXVP_1 EN
USB_EN# VOUT
A5 TANA_0 TP305 H: enable; R389 10K USB_OC1#
TANA_0 TANA_1 FLAG
TANA_1 B5 TP306 L: disable;
CB303
GND 0.1uF/10V
D6 ET_REXT
REXT RT9715EGB Close to Connector
R335 CB304
5 24K_1%
R0603/SMD USB_OC#
0.1uF/10V/NC
MT8555_0825_A if L,then USB_EN set L;
C346 0.1uF/6.3V
USB PORT1&2
J304 FB325
J305 Page 41 C4
3.3V
BE ICE SCL R318 4.7K 3.3V IIC GPIO VCC 1 USB_VCC0 BEAD/SMD/0805 1
GPIO0 R341 0 USBM2 USBM0
SDA R396 4.7K GPIO1 R342 0
TP307
USBP2
2
USBP0
2
FB327 BEAD/SMD/0805 to OPERATION_JP703
10K/NC
10K/NC
10K/NC
10K/NC
10K/NC
TP308 3 3
GPIO2 R345 0 USB_OC1# 4 FB326 BEAD/SMD/0805 4
GPIO3 R347 0 USB_EN1 5
GPIO4 R348 0 TGPIO4 4x1 W/HOUSING-WHITE
GPIO5 R349 0 TGPIO5 DIP4/W/H/P2.0 5P/2.0-WHITE
R317
R395
R385
R399
R334
HA301 GPIO6 R351 0 USB_OC0#

GPIO7 R352 0 USB_EN0 USB differential impedance 90 OHM USB differential impedance 90 OHM
TRST_ MTK suggest W/S/GS=7.5/7.5/20 MTK suggest W/S/GS=7.5/7.5/20
8
FPC DIP CON
TDI 7
TMS
H8D/P1.0
6
TCK 5
4
(for factory)
TP343
TDO 3 USB_VCC1
3.3V 2 P302 FB312
1 RJ45 PORT 11 7
BEAD/SMD/0805
6 8/1.25MM TXVP_0 R323 0

12
USB
8 USBM1
USBP1
USB differential impedance 90 OHM
MTK suggest W/S/GS=7.5/7.5/20
13 9
HEADER 8 1.0 DIP/NC 4 3 TD+ 14 10 USBP1 1 2
FB306 DLW21SN900SQ2/NC close to connector 19 FB313 D320 PTS0603V24T500
close to IC RJ-45
1 2 4 5 20 BEAD/SMD/0805 USBM1 1 2
IC 3.3V POWER C 3.3V TXVN_0
R384 0
TD- 3
9
4
3
5
6 6 close to pin1
C353 0.1uF/6.3V 1
D319 PTS0603V24T500
TXVP_1 R390 0 RD+ GND TD+ muRata ESD 15KV/0.05pF

ESD
2 2 7 7 2
C359 C351 C349 C345 C357 4 3 1 8 TD- 3
0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V FB305 DLW21SN900SQ2/NC 1 8 RD+ USB differential impedance 90 OHM
4
D310 RD- MTK suggest W/S/GS=7.5/7.5/20
1 2 5
TXVN_1 RD- RClamp0524J/NC C354 0.1uF/6.3V 6
3.3V R336 0
close to connector close to pin6
C360 C336 C343 C348 C358

MDI differential impedance 100 OHM
MTK suggest W/S/GS=5/7/20
MDI differential impedance 100 OHM
MTK suggest W/S/GS=5/7/20 R326
LED_CUST
220R
18
17 G
USB PORT ESD
0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V 0.1uF/6.3V
LED_ACT 16
R319 220R 15 Y
ETLEDLINK R386 0 LED_ACT

ETH RJ-45+LED
ETLEDDUPLEX R392 0/NC LED_CUST

ETLEDSPEED R316 0 NETWORK/ ★ Components having special characteristics are marked and must be replaced
7 USB (Rear) with parts having specifications equal to those originally installed.
LED G(L/T): light when 100Mbps/Duplex, dark when 10Mbps/Halfplex;
LED Y(R/B): light when link, flash when data Tx; ★ Schematic diagram is subject to change without notice.
35
A B C D E F G H I J
BD-S473
MAIN 6/10
CNT
3.3V_STB standby power domain
HW Trapping OPWRSB
OPWRSB 1/10
U100D ETTXEN: H*default, RSTI as BE reset; RESET#
RESET# 1/10
R403 0 DVCC33_IO_STB J21 H24 EDID_PSW TP616 TEST POINT SMD0.6 3.3V_STB R480 10K ETTXEN_VOUTD14
DVCC33_IO_STB GPIO8
H21 DVCC33_IO_STB
C409 J27 ETCOL_VOUTD15 LCDRD R494 10K EDID_PSW
ETCOL EDID_PSW 4/10
0.1uF/6.3V/X7R F26
ETCRS
ETMDC J28 HW TRAPPING
J26 NFWEN R432 10K
ETMDIO NFWEN
ETRXCLK G26 NFWEN 5/10
F25 NFREN R405 10K NFREN
ETRXD0 NFREN 5/10
G27 ETRXD1_VOUTD5 R424 1k P_KEY
2 3.3V_STB ETRXD1
ETRXD2 G28 NFCEN R488 10K NFCEN
NFCEN 5/10
ETRXD3 G25 ADDED POWER KEY NFCEN2
NFCEN2 5/10
R408 0 AVDD33_LDO J24 E25 NFCEN2 R484 10K
C408 AVDD33_LDO ETRXDV AMUTE
ETRXER E26 AMUTE 4/10, 8/10
0.1uF/6.3V/X7R H22 G24 3.3V R489 10K AMUTE NFCLE
AVSS33_LDO ETTXCLK NFCLE 5/10
ETTXD0 G23
K21 H23 R482 10K NFCLE NFALE
AVDD10_LDO ETTXD1 NFALE 5/10
ETTXD2 J23 NFALE: L*ROM/NAND boot, H*NOR boot
C402 H26 ETTXD3_VOUTD13 R477 10K/NC NFALE R490 10K AOLRCK
ETTXD3 AOLRCK 4/10, 8/10
0.1uF/6.3V H25 ETTXEN_VOUTD14 AOSDATA0
ETTXEN AOSDATA0 4/10, 8/10
F24 AOLRCK R479 10K AOSDATA1
ETTXER AOSDATA1 4/10
AOSDATA2
AOSDATA2 4/10
J25 UARXD R406 10K/NC AOSDATA0 R407 10K
UARXD UATXD FEGIO4
UATXD K26 FEGIO4 9/10
R409 10K/NC AOSDATA1 R412 10K
RS232
L25 VSTB R413 10K/NC AOSDATA2 R417 10K
VSTB VDATA TGPIO5
VDATA M23 FEGIO4: H* HDMI JTAG, L* default; TGPIO5 5/10
M24 VCLK R420 10K/NC FEGIO4 R422 10K TGPIO4
VCLK TGPIO4 5/10
L26 LCDRD normal power domain
LCDRD
ETH
3 IR K25
K23
IR
RESET#
ETLEDLINK
ETLEDSPEED
ETLEDLINK 5/10
RESET_ ETLEDSPEED 5/10
K24 OPWRSB ETLEDDUPLEX
OPWRSB ETLEDDUPLEX 5/10
MT8555_0825_A
Signal name Ball HW trapping Note

J412 RS232 3.3V_STB
2nd RS232 3.3V
1 RX 0: Default (ICE disable)

2 UARXD R481 10K TP604 TGPIO5 R426 10K ETTXD3_VOUTD13 R418 0 ETLEDLINK AMUTE D10
(for factory) 3
4
UATXD R473
RS1_GND NC418
10K TP615 TGPIO4 R483 10K ETTXEN_VOUTD14
ETCOL_VOUTD15
R419
R421
0
0
ETLEDSPEED
ETLEDDUPLEX
1: Main RISC ICE enable
NC0603/SMD TX JTAG_TRAP
4x1 W/HOUSING-BLACK
FEGIO4 T3
DIP4/W/H/P2.0 1 2 UARXD
4 D421 LXES15AAA1-017/NC 0: Default 1: HDMI
RS1_GND 1 2 UATXD
D422 LXES15AAA1-017/NC NFCEN2 AD5
muRata ESD 15KV/0.05pF 00: Normal mode (Default)
NFCEN AH2
NFWEN AG4 0: Default 1: OLT Test Mode
Normal power
3.3V_STB NFALE AF4 0: Default 1: FLASH boot domain
XTL_REF_SEL
AOLRCK B12
VFD/IR 3.3V_STB for EMC
0: XTAL 1: VCXO
C415 R478 10K VDATA C416 100pF/10V/NC
J410 4.7uF/10V NFCLE AG3 0: Old NFI 1: new NFI (Default)
C0603/SMD R487 10K VSTB C413 100pF/10V/NC
TP665 1 FB7 BLM21P -24V
NFREN AD4 0: Default 1: ABIST mode
2 FB5 BLM21P R431 10K VCLK C411 100pF/10V/NC
TP649
TP650 3 FB319 BLM18P R404 10 FIP_IR AOSDATA0 C11
Page 41 B3 TP651 4 C412
TP652 5 FB318 BLM18P VCLK 100pF/10V AOSDATA1 D11 Reserved trapping 000: (Default)
5 to OPERATION_JP702 TP653 6 FB317
FB316
BLM18P
BLM18P
VSTB
VDATA
TP654 7 AOSDATA2 D12
TP655 8 FB315 BLM18P P_KEY
ETTXEN H25 LCDRD, ETTXEN=01: Standby power
CON8
LCDRD L26 Normal mode (Default) domain
R410 0
3.3V_STB 3.3V_STB
J802 3.3V_STB
TP661 3 Add for hold standby key 5S reset
TP662 2
1 EXT_IR
TP663
R453 R454 R455 R423
10k 10k 10k 10K_NC
CON3
FIP_IR D26 1N4148 IR
RESET#
6 EXT_IR R461 33 D27 1N4148
C414
C418 P_KEY R411 33K R414 47K Q122 0.1u_NC
0.01u D203 DIODE SCHOTTKY 2SC2412K
Q123
R415 C417 2SC2412K
R416 C554 47K 100pF/10V
Note: 10K R425
68uF/10V/105°C 10K
for BD-S473: mount R410
remove R453,R454,R455,R461,D26,D27,J802
for BD-S673: remove R410
mount R453,R454,R455,R461,D26,D27,J802
36
A B C D E F G H I J
BD-S473
MAIN 7/10
VIDEO
VDACG_OUT
VDACG_OUT 4/10
VDACB_OUT
VDACB_OUT 4/10
VDACR_OUT
1.15V U100G VDACR_OUT 4/10
VDACX_OUT
R551 0 AVDD12_HDMI_RX D8 E28 VDINHSYNC VDACX_OUT 4/10
VDD12_HDMI_RX VDINHSYNC TP552 TEST POINT SMD0.6
D7 F27 VDINVSYNC TP551 TEST POINT SMD0.6
VDD12_HDMI_RX VDINVSYNC
F28 VDINCLK AUDIO
VDINCLK TP553 TEST POINT SMD0.6
C552 C553
4.7uF/6.3V/X5R 0.1uF/6.3V/X7R
C0603/SMD E27 VDIN0 TP577 TEST POINT SMD0.6
VDIN0 VDIN1
E8 VSS33_HDMI_RX VDIN1 D28 TP578 TEST POINT SMD0.6 SPDIF
2 F8 VSS33_HDMI_RX VDIN2 D27 VDIN2
VDIN3
TP579 TEST POINT SMD0.6 SPDIF 4/10
VDIN3 C28 TP583 TEST POINT SMD0.6
C27 VDIN4 TP581 TEST POINT SMD0.6
3.3V VDIN4 VDIN5
VDIN5 B28 TP582 TEST POINT SMD0.6
D26 VDIN6 TP554 TEST POINT SMD0.6
R560 0 AVDD33_HDMI_RX VDIN6 VDIN7
C8 VDD33_HDMI_RX VDIN7 A28 TP558 TEST POINT SMD0.6
C7 B27 VDIN8 TP559 TEST POINT SMD0.6
C567 VDD33_HDMI_RX VDIN8 VDIN9
VDIN9 A27 TP580 TEST POINT SMD0.6
4.7uF/6.3V/X5R C557 C26 VDIN10 TP584 TEST POINT SMD0.6
C0603/SMD 0.1uF/6.3V/X7R VDIN10 VDIN11
B26 VDIN12 TP560 TEST POINT SMD0.6
VDIN12 VDIN13
VDIN14 VDIN15
A9 B24 VDIN16 TP564 TEST POINT SMD0.6
RXCKB VDIN16 VDIN17
B9 RXCK VDIN17 D23 TP565 TEST POINT SMD0.6
VDIN18 VDIN19
A6 RX2B VDIN19 D22 TP550 TEST POINT SMD0.6
B6 C22 VDIN20 TP567 TEST POINT SMD0.6
RX2 VDIN20 VDIN21
VDIN21 E23 TP568 TEST POINT SMD0.6
A7 E22 VDIN22 TP569 TEST POINT SMD0.6
RX1B VDIN22 VDIN23
B7 RX1 VDIN23 F22 TP570 TEST POINT SMD0.6
VDIN24
3 A8
VDIN24 A22
B22 VDIN25
TP571
TP572
TEST POINT SMD0.6
TEST POINT SMD0.6
RX0B VDIN25 VDIN26
B8 RX0 VDIN26 A21 TP573 TEST POINT SMD0.6
VDIN27 VDIN28
VDIN29 VDIN30
VDIN30 D21 TP590 TEST POINT SMD0.6
VDIN31 VDIN32
D20 VDIN33 TP587 TEST POINT SMD0.6
VDIN33 VDIN34
VDIN34 F21 TP588 TEST POINT SMD0.6
G20 VDIN35 TP589 TEST POINT SMD0.6
VDIN35
MT8555_0825_A
VIDEO BUFFER LOW IMPEDANCE
VDACG_OUT L860 0.22uH G/Y VDACR_OUT L862 0.22uH R/V

2
2
R503 C502 C509 D507 R508 C501 C506 D506
75_1% 22pF/6.3V/NC 22pF/6.3V DIODE SMD BAV99_NC 75_1% 22pF/6.3V/NC 22pF/6.3V DIODE SMD BAV99_NC
SOT23/SMD SOT23/SMD
1
3
VCC VCC
VDACX_OUT L863 1uH CVBS

VDACB_OUT
5 L861 0.22uH B/U
2
2
R525 C505 C520
R506 C522 C504 D504 75_1% 47pF/6.3V/NC 47pF/6.3V D505
75_1% 22pF/6.3V/NC 22pF/6.3V DIODE SMD BAV99_NC DIODE SMD BAV99_NC
SOT23/SMD SOT23/SMD
1
3
VCC VCC
J503
RCA2X2
AV C521
COAXOUT SPDIF OUT
R505 C508
6 CONNECTOR R509
100 82pF/6.3V 0.1uF/6.3V
140_1%
1
2
3
4
5
6
7
6
8
VCC 4
K1
K3
C
1 G
from IC 2
R/V SPDIF R599 33 VCC
3 S
G/Y 5
K2
C555 C507 G
10uF/10V_NC 0.1uF/10V
7
B/U
CVBS P501
TP633 S/PDIF OUT
TP647
TP648
TP632
DLT11R2-D2
TP626
TP627
TP629
TP628

37
A B C D E F G H I J
BD-S473
MAIN 8/10
AUDIO CNT
AMUTE
AMUTE 4/10, 6/10
2
SCL
SCL 5/10
SDA
SDA 5/10
CON11 OFF_MUTE
OFF_MUTE 1/10
11 AOSDATA_C R786 0/NC AOSDATA4 AUDIO I2S
TP664
10 FB328 BLM18P AMUTE
TP642
9 FB320 BLM18P A_MUTE AOSDATA_C R775 0 AOSDATA0 AOMCLK
TP644 AOMCLK 4/10
8 FB321 BLM18P AOSDATA_C AOLRCK
TP637 AOLRCK 4/10, 6/10
7 AOBCK
TP641 AOBCK 4/10
6 FB322 BLM18P AOBCK_C AOLRCK_C R760 33 AOLRCK AOSDATA0
TP639 AOSDATA0 4/10, 6/10
5 FB323 BLM18P AOLRCK_C
TP640
TP643 4
3 FB324 BLM18P AOMCLK_C AOBCK_C R766 33 AOBCK
TP638
2 AOSDATA4
TP645 AOSDATA4 4/10
1 FB6 BLM21P
3 TP646 VCC
AOMCLK_C R773 33 AOMCLK
HA701
(for factory)
4
AUDIO MUTE
P12V D28 1N4148
5V_STB D29 1N4148
R732 C556
Normal mute 47K
100uF/16V
-24V
R774 100
AMUTE:
5 H: mute On (quickly)
2
L: mute Off (slowly, RC)
3
AMUTE R710 10K Q702 AC power ON Q704
1
from IC chip 2N3904 R718 10K 1 2N3906 R719
SOT23/SMD SOT23/SMD 150K
3
2
C708
10uF/16V A_MUTE
R776 100 C0805/SMD to mute triode
C419 R721
2
100K
OFF_MUTE R720 10K 1 Q705 0.1u
2N3904
SOT23/SMD
3
6 AC power OFF

38
A B C D E F G H I J
BD-S473
FE_1.15V 1.15V
MAIN 9/10 NC812 NC20/SMD
OPU MISC
V14REF U100F
V14REF K6 E4 C803 C804 C860 C801 C813 V14REF
V14 AVDD12_1A V14REF 10/10
HA801 Sony470 close to IC
C802 CD_VR FVREF H6 FVREF
AVDD12_2A L5 0.1uF/6.3V/X7R
C0402/SMD
0.1uF/6.3V/X7R
C0402/SMD
4.7uF/6.3V/X5R
C0603/SMD
10uF/6.3V/X5R
C0805/SMD
0.1uF/6.3V/X7R
C0402/SMD
4.7uF/6.3V/X5R M6 FEGIO4
HAVC AGND12_2A FE_3.3V FEGIO4 6/10
1 TILT- C0603/SMD K5 G6
FR2 TILT- HAVC AGND12_1A
FD2 2 TILT+
TILT+
FE_GND 3.3V LOAD
3 TR- L6
TD TR- AVDD33_3A NC805 NC20/SMD
4 TR+ HAVC J5 TRAYOUT#
TR TR+ AVDD33_1A TRAYOUT# 10/10
5 FR- TRINA G3 TRAYIN#
FR1 FR- TRINA TRINA TRAYIN# 10/10
6 FR+ TRINB H4 M5 C805 C806 C807 C808 C812
FD1 FR+ TRINB TRINB AGND33_3A
SA_B+ 7 CO_B+ C832 close to IC
TRINC
TRINC H3 TRINC AGND33_1A J6 0.1uF/6.3V/X7R 0.1uF/6.3V/X7R 4.7uF/6.3V/X5R 10uF/6.3V/X5R 0.1uF/6.3V/X7R MOTO
8 CO_B- 4.7uF/10V/X5R TRIND H5 L7 C0402/SMD C0402/SMD C0603/SMD C0805/SMD C0402/SMD
SA_B- CO_A+ C0603/SMD TRIND TRIND AGND33_2 FG
SA_A+ 9 FG 10/10
2 SA_A- 10
11
CO_A-
R730 0/NC FOIN FE_GND FE_GND
GAINSW2
MUTE2
GAINSW2
MUTE2
10/10
10/10
SA_INT AUX1 INA MUTE1
THERMO 12 INA G2 INA MUTE1 10/10
13 INH INB INB G1 LIMIT#
F INB LIMIT# 10/10
14 INB INC INC H2 TLO
A INC FE_3.3V TLO 10/10
15 ING IND IND H1 TRO
E IND TRO 10/10
16 INA VCC_PDIC INE K3 FOO
B INE INE FOO 10/10
17 INF K4 W5 FG FG TYPWM
VCC PD INF INF FEFG close to IC TYPWM 10/10
18 IND R730 R722 ING J4 FMO1
C ING ING FMO1 10/10
19 INH J3 L4 EQBIAS R801 24K_1% FE_GND R803 FMO2
GND_PD INH INH EQBIAS FMO2 10/10
DRFO+ AUX1 DMO
BOTTOM
DVD RF+ 20 Sony460 0 0 AUX1 G4 10K DMO 10/10
21 DRFO- F3 VDAC0 GAINSW3
DVD RF- VDAC0 GAINSW3 10/10
22 Sony470 NC NC G5 VWDC3O FMO3
GND PD VWDC3O FMO3 10/10
23 RFO+ FOIP C2 E1 VWDC2O AUX1 FMO4
to BD mechanism unit BD RF+
BD RF- 24 RFO-
FOIP
FOIN
FOIN C1
FOIP
FOIN
VWDC2O
VWDC1O F4 VWDC1O
FMO4 10/10
25 E3 VRDCO FOIN
GND PD VRDCO FOIN 10/10
26 INC C736
D
G 27 INE FPDODVD E2 FPDODVD FEMPXOUT1 P2 MPXOUT1 0.1uF/50V/X7R OPU
28 HAVC FPDOCD D1 N6 MPXOUT2
VC_PD INF C733 FPDOCD FEMPXOUT2 MPXOUT3 FR+
H 29 FEMPXOUT3 P3 FR+ 10/10
30 VCC_3.3V 0.1uF/50V/X7R FR-
GND FR- 10/10
31 RFO- C815 0.1uF/50V/X7R RFIN K2 FE_GND TR+
GND RFO- RFIN TR+ 10/10
32 VCC_LD FE_GND RFO+ RFO+ C814 0.1uF/50V/X7R RFIP K1 W4 PLAY# TR-
3.3V RFIP FEPLAY_ PLAY# TR- 10/10
33 DRFO+ C817 0.1uF/50V/X7R RFIP2 L1 V4 LIMIT# LIMIT# TILT+
GND DRFO+ RFIP2 FELIMIT_ TILT+ 10/10
VCC_BD_LD DRFO- C818 0.1uF/50V/X7R RFIN2 EJECT# TILT-
3 5.0V
GND
34
35
DRFO- L2 RFIN2 FEEJECT_
FETRAYOUT_
U4
V5 TRAYOUT#
EJECT#
TRAYOUT#
TILT- 10/10
36 V6 TRAYIN# TRAYIN# FE_3.3V CO_B-
8.0V FETRAYIN_ CO_B- 10/10
37 LDD_SDIO LDD_SDIO P5 CO_B+
GND FECFREQ CO_B+ 10/10
38 LDD_SDIO LDD_CLK LDD_CLK R5 CO_A+
SDIO FEOSCEN CO_A+ 10/10
39 LDD_CLK LDD_SEN LDD_SEN R3 CO_A-
SCLK FECMOD CO_A- 10/10
40 LDD_SEN D3 RSTI RSTI R844
SEN_LDD GIO7 RSTI 1.2K
LDEN 41
42 FPDODVD GAINSW1 T1
TEST_V GIO5 GAINSW2 FEGAINSW1
MODE A 43 P4 FEGAINSW2
44 GAINSW1 GAINSW3 P6 AUX1 AUX1 RSTI
MODE B MODEC R722 0/NC GIO6 FEGAINSW3 VDAC0 RSTI trigger voltage is 1.15V;
MODE C 45 VDAC0
46 VWDC3O VWDC3O
GND FMO3 VWDC2O
GND 47 FMO3 P1 FEFMO3 VWDC2O
48 FMO4 FMO4 N5 VWDC1O VWDC1O R805 C861
GND TLO FEFMO4 VRDCO 1K 0.1uF/10V
GND 49 TLO M3 TLO VRDCO
TRO TRO M4
FOO TRO MPXOUT1
FOO L3 FOO MPXOUT1
FPC_45_0.5_BOT TYPWM TYPWM N4 MPXOUT2 MPXOUT2
JS45P-SMD-L FMO1 FETRAYPWM MPXOUT3 FE_GND
FMO1 N1 FEFMO MPXOUT3
FE_GND FMO2 FMO2 N3
DMO FEFMO2 V14REF
DMO N2 FEDMO V14
FVREF FVREF
HAVC HAVC
GND
4 MUTE1 MUTE1
MUTE2
R4 FEGIO0 FPDODVD FPDODVD
FPDOCD
MUTE2 R6 FEGIO1 FPDOCD
JP2 JP2 T2
LED1 FEGIO2 GAINSW1 FE_GND
T6 FEGIO3 GAINSW1
FEGIO4 LED2 T3 GAINSW2 GAINSW2 TP801
GIO5 FEGIO4 GAINSW3
GIO5 U1 FEGIO5 GAINSW3 TP806
3.3V GIO6 GIO6 U2 TP807
GIO7 FEGIO6 LED1
GIO7 W3 FEGIO7 LED1
R806 10K JP2 JP1 JP1 T4 LED2 LED2
R850 10K JP1 GIO9 FEGIO8
GIO9 V3 FEGIO9 TP809
URXD U3 TP811
FEGIO10 FE_GND
UTXD U5 TP813
FESCLK FEGIO11
FESCLK U6 FEGIO12
FESDATA FESDATA T5 FEGIO13
FE HW Trapping MT8555/PBGA606/P0.8/B0.4/23X23
[FEGIO0/1/4/6/7] L*default, H*test mode; MT8555_0825_A
IC internal PD,Not allowed to PU in circuit layout; Please place test point as below at TOP layer;
If GIO4 is H, ICE debug port can use from HDMI output. 1. TRINA ~ TRIND;
2. MPXOUT1 ~ MPXOUT3;
3. RFO+, RFO-,DRFO+,DRFO-;
5 AVCC is important for readability,
put FB805 nearby power source connector,
4. TLO, FOO, TRO, FMO1, FMO2, FMO3, FMO4, DMO;
AVCC VCC 5. LED1, LED2;
and AVCC trace should avoid the motor
driver signal area; 6. FG
FB805 BLM18P
BEAD/SMD/0603 7. FR+, TILT+, TR+, CO_A+, CO_B+
C865 C859 C862 C811 C816
10uF/10V/X5R NC NC 0.1uF/10V 0.1uF/10V
C0805/SMD
VCC_3.3V 3.3V FE_GND 3.3V FE RS232

CON802
NC811
1
NC0603/SMD 2 URXD
C869 Writing port 3 UTXD
2.2uF/10V 4
C0603/SMD
close to connector 4x1 W/HOUSING-BLACK
DIP4/W/H/P2.0
FE_GND
VCC_PDIC AVCC
6 NC810
NC0603/SMD
C868
2.2uF/10V
C0603/SMD
VCC_LD close to connector
NC806 FE_GND
NC0603/SMD
C836 C863
10uF/10V 0.1uF/10V
C0805/SMD
FE_GND U803 P12V

VCC_BD_LD APL1117-ADJ
ADJ/GND
2 3 FB806 BLM18P
OUT IN BEAD/SMD/0603
C873 C870 C875 C810
0.1uF/16V 10uF/16V/X5R 10uF/16V 0.1uF/16V
C0805/SMD SOT223/SMD C0805/SMD
1
7 FE_GND FE_GND R818 121_1% FE_GND FE_GND

with parts having specifications equal to those originally installed.
R0603/SMD
R873 649_1%
FE_GND
R0603/SMD
39
A B C D E F G H I J
BD-S473
MAIN 10/10
OPU
TR+
M12V M12V TR+ 9/10
TR- TR- 9/10
V14REF U800 FR+
MVCC FR+ 9/10
VCC C835 0.1uF/25V/Y5V 1 56 A- FR-
C19V SLED2_N FR- 9/10
C848 2 55 A+ TILT+
Close to 1405 pin26 Close to TPC1391 pin14 CP2 SLED2_P TILT+ 9/10
2 FB904 BLM21P 0.1uF/25V/Y5V 3 54 TILT-
V14REF CP1 P12V_3 TILT- 9/10
BEAD/SMD/0805 C827 C845 C831 4 53 B- CO_B-
CA5V SLED1_N CO_B- 9/10
C936 C932 C933 C938 1uF/10V/Y5V 5 52 B+ CO_B+
AGND SLED1_P CO_B+ 9/10
0.1uF/10V 0.1uF/10V 10uF/10V 10uF/10V 4.7uF/10V/Y5V 0.1uF/50V/X7R 6 51 CO_A+ CO_A+ 9/10
NC903 C0805/SMD C0805/SMD VREF PGND_3 CO_A-
7 TEST1 CV3P3 50 CO_A- 9/10
NC1206/SMD 8 49 COMMON C829 0.1uF/50V/X7R
3.3V TEST2 MCOM R811 0.2_1%
M M M M M 9 TEST3 ISENSE 48 MOTOR
XREST 10 47 R810 0.2_1%
TP802 XRESET ICOM2
R829 33K FG 11 46 W FMO4
XFG W FMO4 9/10
R826 33K ENDDET 12 45 FMO3 FMO3 9/10
LIMIT# R819 0 MUTE1 ENDDET P12V_2 V FOO
separate this P12V trace and other P12V M12V 13 XMUTE1 V 44 M FOO 9/10
MUTE2 14 43 TRO
element(audio OP,VCC_BD_LD) from the M12V XMUTE2 ICOM1 TRO 9/10
P12V GAINSW3 15 42 U FMO2 FMO2 9/10
F102 power source connector FMO2 GC U FMO1
16 VSLED1 P12V_1 41 FMO1 9/10
Close to 1405 pin41 Close to 1405 pin45 Close to 1405 pin54 FMO1 C842 0.1uF/50V/X7R DMO
17 VSLED2 C10V 40 DMO 9/10
DMO 18 39 MVCC TLO
VSPIN P5V_2 TLO 9/10
C943 3A C939 C934 C917 C940 C942 C916 C941 TYPWM 19 38 M TYPWM
0.1uF/16V 0.1uF/16V 10uF/16V 0.1uF/16V 10uF/16V NC 0.1uF/16V 10uF/16V TRO VLOAD FB1PxV GAINSW3 TYPWM 9/10
20 37
3 NC904 C0805/SMD C0805/SMD C0805/SMD FOO 21
VTRK REG1PxV
36
TP803
GAINSW2
GAINSW3 9/10
VFCS REG3P3V TP804 GAINSW2 9/10
NC1206/SMD TLO 22 35
VTLT FB3P3V TRAYIN#
M M M M M M M 23 PGND_1 PGND_2 34 TRAYIN# 9/10
C631 C630 C632 TILT+ 24 33 LOAD- R821 0/NC M12V TRAYOUT#
TLT_P LOAD_N TRAYOUT# 9/10
TILT- 25 32 LOAD+ FG FG 9/10
NC NC NC TLT_N LOAD_P R824 0 MUTE2
MVCC 26 P5V_1 P5V12L 31 MVCC MUTE2 9/10
V14REF FR+ 27 30 TR- MUTE1
FCS_P TRK_N MUTE1 9/10
FR- 28 29 TR+ LIMIT#
FCS_N TRK_P LIMIT# 9/10
FOIN
FOIN 9/10
V14REF
TPIC1405AFDRG4 V14REF 9/10
M M
TP656
TP657
TP658
TP659
TP660
MUTE1 R825 10K

MUTE2 R828 10K
TRAY M
4
M
C937 R968 0 HA903

0.1uF/16V
FPC DIP CON
TRAYOUT# R966 1K 5
H5D/P1.0
TRAYIN# R973 1K 4 R971

C930 3
0.1uF/16V LOAD+ 2
to BD mechanism unit U907
Sony460 NC
LOAD- 1
M 0 1 30
M
MVCC Sony470 2
LED0 Latch_RSOUT
29
DIP5/W/H/P2.0 Latch_SET Latch_XRSOUT
3 Latch_CLR CSWI 28
HEADER 5 1.0 DIP-BLACK R984 1K 4 27
9PIN_FFC SLED & SPINDER R982 1K SWR_SEQ1 CSWO
5 SWR_SEQ2 TEST1 26
FPC_9_1.0_BOT R953 1K 6 25
R852 1K U GAINSW2 SWR_OUTSEL/XMUTE FB3P3V
7 STEP_ENA REG3P3V 24
R854 1K V FMO4 8 23
COMMON R856 1K W FMO3 STP1_IN PGND_SW
1 9 STP2_IN REG1PxV 22
5 2 U TPIC_U R969 1K 10 XLEDON P5V_SW 21
3 V FOIN R971 0 11 20
BOTTOM
TPIC_V CSWON FB1PxV

4 W TPIC_W R983 33K 12 19 CO_A-
M
R967 33K COLLIENDZ STP2- CO_A+ CO_A-
5 3.3V 13 XRESET STP2+ 18 CO_A+
6 B+ C840 1000pF/50V/X7R MVCC 14 17 CO_B-
B- A5V STP1- CO_B+ CO_B-
7 15 AGND STP1+ 16 CO_B+
8 A+ TPIC_B+ C935
9 A- TPIC_B- 0.1uF/10V put these test pad on the top side
TPIC_A+ M M TPC1391G4 M
TPIC_A- PDSO30/SMD/P0.5/TPIC1391DBTRG4
J801
C843
to BD mechanism unit
1000pF/50V/X7R
6 M

40
A B C D E F G H I J
BD-S473
OPERATION
(VFD) F1 F2 -24V
JP701
4 FB701 FB/0805
3 FB702 FB/0805 3.3V-STB
to Power supply unit_CON1 2 GND
1
C703
2 4P/2.0 C702 C701 + FL DISPLAY
VFD DISPLY
TO POWER BOARD 0.1u 0.1UF 47uF/10V
VFD20-0825F
3
VCC 2
GND U701
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
U702 1
1G
2G
3G
4G
5G
6G
7G
8G
P9
P8
P7
P6
P5
P4
P3
P2
P1
F1
F1
F2
F2
OUT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Remote control
3.3V-STB
JP702 sensor
8 FB703 FB/0603 STB-KEY R701 10K
7 FB704 FB/0603 DATA F1 F2
6 FB705 FB/0603 CS
Page 36 B5 5 FB706 FB/0603 CLK IR
3 to MAIN_J410
4
3 FB707 FB/0603 3.3V-STB -24V -24V
IR
2 FB708 FB/0805
1 FB709 FB/0805
C705
C704 +
0.1UF
47uF/10V C706
TO MAIN BOARD 0.1UF
-24V
FGND
CON701
33
32
31
30
29
28
27
26
25
24
23
6 FB710 U703
5 FB/0805 3.3V-STB
4
VEE
Seg16/KS16
Seg15/KS15
Seg14/KS14
Seg13/KS13
Seg11/KS12
Seg11/KS11
Seg10/KS10
Seg19/Grid10
Seg18/Grid11
Seg17/Grid12
JP704
USB 4 USBVCC 5P/2.0 34 22
3 USBM0 1 USBVCC 2 3.3V-STB 35 Seg20/Grid9 Seg9/KS9 21
(Front) 2 USBP0 + C712 2 USBM0 2 1 STB-KEY 36 Seg21/Grid8 Seg8/KS8 20
1 3 USBP0 1 37 Seg22/Grid7 Seg7/KS7 19
47uF/10V 4 3.3V-STB 38 Seg23/Grid6 Seg6/KS6 18
5 FGND 2p/2.0 39 Seg24/Grid5 Seg5/KS5 17
40 Grid4 Seg4/KS4 16 3.3V-STB
TO USB BOARD
Page 35 G5
JP703
TO KEY & LED BOARD
41
42
Grid3
Grid2
PL6315L Seg3/KS3
Seg2/KS2
15
14
KS2
KS1
TO MAIN BOARD 43 Grid1 Seg1/KS1 13
VDD VDD
to MAIN_J305 44 12
KEY1
KEY2
LED1
LED2
LED3
LED4
OSC
Dout
CLK
STB
VSS VSS
Din
R702 10K KEY1 C709
1
2
3
4
5
6
7
8
9
10
11
PT6315L C710
R703 10K KEY2 0.1u FL DRIVER 0.1UF
5
R704 10K_NC
0 R706
KEY1
KEY2
CLK
CS
PLAY PAUSE
R705 DATA
100K
2
R707 10K_NC
K701 K702 USBVCC 1
D701 1N4148
KS2 R708 Q701
3
M1 M2 M3 M4 2N3904_NC
100K_NC R709
1 1 1 1
EJECT STOP 1.5K_NC
LOGO S/N MARK1 MARK2
DING1 DING2 DING3 DING4
6
K703 K704 1 1 1 1
D702 1N4148 JP8 JP9 JP8 JP9 D703

KS1
LED-GREEN_NC
(POWER) JP801
2 STB-KEY
2 1 3.3V-STB POWER
1
7 2p/2.0 with parts having specifications equal to those originally installed.
K801
(On/standby) ★ Schematic diagram is subject to change without notice.
41
A B C D E F G H I J
BD-S473
1 ■ REPLACEMENT PARTS LIST

● OVERALL ASSEMBLY
101
16
200
101
3
102
102 17
5 101
10
103
11 9 103
33
4
5-1
3-1 6
23
103
25
103
31 29
2 3
105 105
5 4 104
1 24
30
6
105
20
19
103
103
22
21
7
42
BD-S473
WARNING
• Components having special characteristics are marked and must be replaced with parts having specifications
equal to those originally installed.
Ref No. Part No. Description Remarks Markets Ref No. Part No. Description Remarks Markets
* 1 ZE276700 P.C.B. ASSEMBLY OPERATION A JEPS473FA-V1.0-R0 * 33 ZE278200 REAR PANEL JGR473-K-R0 K
* 2 ZE276800 P.C.B. ASSEMBLY OPERATION B JEPS473FB-V1.0-R0 * 33 ZE277800 REAR PANEL JGR473-A-R0 A
* 3 ZE276600 P.C.B. ASSEMBLY MAIN JEPS473M-U-V1.0-R0 U * 33 ZE277900 REAR PANEL JGR473-B-R0 B
* 3 ZE276500 P.C.B. ASSEMBLY MAIN JEPS473M-T-V1.0-R0 T * 33 ZE278100 REAR PANEL JGR473-G-R0 G
* 3 ZE276200 P.C.B. ASSEMBLY MAIN JEPS473M-K-V1.0-R0 K * 33 ZE278000 REAR PANEL JGR473-F-R0 F
* 3 ZE275800 P.C.B. ASSEMBLY MAIN JEPS473M-A-V1.0-R0 A * 33 ZE278300 REAR PANEL JGR473-L-R0 L
* 3 ZE275900 P.C.B. ASSEMBLY MAIN JEPS473M-B-V1.0-R0 B * 33 ZE278400 REAR PANEL JGR473-P-R0 P
* 3 ZE276100 P.C.B. ASSEMBLY MAIN JEPS473M-G-V1.0-R0 G 101 WV558200 PW HEAD S-TIGHT SCREW 3x6 MFZN2B3 PWM3x6-B-R0
* 3 ZE276000 P.C.B. ASSEMBLY MAIN JEPS473M-F-V1.0-R0 F 102 WV558400 PW HEAD S-TIGHT SCREW 3x7 MFZN2W3 PWM3x7-R-R0
* 3 ZE276300 P.C.B. ASSEMBLY MAIN JEPS473M-L-V1.0-R0 L 103 WV558300 PW HEAD S-TIGHT SCREW 3x6 MFZN2W3 PWM3x6-R0
* 3 ZE276400 P.C.B. ASSEMBLY MAIN JEPS473M-P-V1.0-R0 P 104 WV557800 PAN HEAD SCREW 3x6 MFZN2W3 PM3x6-R0
* 3-1 ZE486700 HDMI SOCKET 099ABAC19BACCEN-R0 * 105 ZE279300 FLAT HEAD B-TIGHT SCREW 3x6 MFZN2W3 FB3x6-R0
* 4 ZE280300 POWER SUPPLY UNIT JEPS473P1-1-R0 106 WV557700 PAN HEAD TAPPING SCREW 3x8 MFZN2W3 PA3x8-R0
* 5 ZE276900 BD MECHANISM UNIT JAY473H-R0
5-1 WZ617700 LOADING BELT 121400000015-R0 ACCESSORIES
* 6 ZE280100 POEWR CABLE 1.8m JJA0014F-L180-150-7-R0 UP * 200 ZE278800 REMOTE CONTROL BDP120 JAKS473-US-1-R0 U
* 6 ZE280000 POEWR CABLE 1.8m JJA0011F-L180-150-7-R0 T * 200 ZE278700 REMOTE CONTROL BDP121 JAKS473-EU-1-R0 TKABGFLP
* 6 ZE279800 POEWR CABLE 1.8m JJA0004F-L180-150-7-R0 K BATTERY R03,AAA,UM-4 2pcs
* 6 ZE280200 POEWR CABLE 1.8m JJA0019F-L180-150-7-R0 A
* 6 ZE279700 POEWR CABLE 1.8m JJA0002F-L180-150-7-R0 B SERVICE TOOLS
* 6 ZE279900 POEWR CABLE 1.8m JJA0008F-L180-150-7-R0 GFL WW867800 USB-UART CONVERTION ADAPTOR CP2102-GM 1set
* 9 ZE277000 FLEXIBLE FLAT CABLE 45P 180mm P=0.5 JWJ45P0.5T180L-Z-4-R0 WW867900 TEST DISC SET 5pcs/set
* 10 ZE277100 FLEXIBLE FLAT CABLE 9P 230mm P=1.0 JWJ9P1.0T230L-2Z-4-R0
* 11 ZE277200 FLEXIBLE FLAT CABLE 5P 110mm P=2.0 JWV5P2.0Y110-4-R0
* 16 ZE277500 TOP COVER JKM473-R0
* 17 ZE279500 INSULATION PAD TOP COVER JMZ80x60x0.3-1-R0
* 19 ZE279000 FOOT FRONT JMG60x6.3R-R0
* 20 ZE278900 FOOT REAR JMG22x4.5R-R0
* 21 ZE279200 FOOT SHEET FRONT JMG50x1R-1-R0
* 22 ZE279100 FOOT SHEET REAR JMG20x1R-1-R0
* 23 ZE279600 CONDUCTION PAD JMG23x16x3.5-1-R0
* 24 ZE279400 INSULATION PAD POWER SUPPLY UNIT JMZ2040-1-R0
* 25 ZE277600 FRONT PANEL JYP473NP-R0
* 29 ZE277700 BUTTON POWER JGU473P-R0
* 30 ZE277400 SHEET WINDOW FRONT PANEL JKW473R-R0
* 31 ZE277300 SHEET WINDOW DOOR JKW473L-R0
* 33 ZE278600 REAR PANEL JGR473-U-R0 U
* 33 ZE278500 REAR PANEL JGR473-T-R0 T
✻ New Parts ✻ New Parts
43
A B C D E F G H I J
BD-S473
1 ■ REMOTE CONTROL
SCHEMATIC DIAGRAM PANELS
BDP120 BDP121
(U model) (T, K, A, B, G, F, L, P models)
U1 VCC
1 1 16
OSCI VDD J1
4M
2 15 1
OSCO GND + C2
3 14 C1 47uF/50V 2 VCC
PB0 IROUT
104 POWER
4 PA5 13
PB4 PROGRAM: Red
2 5 12 D1
PB5 PB4
MARKER: Green
6 PA3 11
PB6 LED DIGEST: Yellow
7 10 IROUT R1
PB7 PA2 ZOOM: Blue
8 9 2.2R
PA0 PA1
20T215R
PB0 PA0 PA1 PA2 PA3 PA4

3
K1 K7 K13 K19 K25 K31
PB4
K2 K8 K14 K20 K26 K32
PB5
K3 K9 K15 K21 K27 K33
PB6
K4 K10 K16 K22 K28 K34
PB7
K5 K11 K17 K23 K29 K35
4
PA5
K6 K12 K18 K24 K30 K36
GND
44
BD-S473
KEY NO. LAYOUT KEY CODE

Custom code: 7C
ID1
Key No. Key Name
1 2 Data code 0 Data code 1
1 (Open/Close) 81 7E
3 4 5 6 2 (Standby/On) 80 7F
3 PROGRAM (Red) E9 16
7 8 9 4 MARKER (Green) EA 15
5 DIGEST (Yellow) EC 13
10 11 12 6 ZOOM (Blue) EB 14
7 SHUFFLE A1 5E
13 14 15 8 REPEAT A3 5C
9 A/B A4 5B
16 17 18 10 PIP ED 12
11 (Skip -) B9 46
12 (Skip +) BA 45
19 EE 11
13 2nd AUDIO
14 (Search -) 86 79
20 21 22 15 (Search +) 87 08
16 (Stop) 85 7A
17 (Pause) 83 7C
23 18 (Play) 82 7D
19 (UP) B4 4B
24 25
20 (Left) B5 4A
26 27
21 ENTER B8 47
22 (Right) B6 49
28 29 30 31
23 (Down) B3 4C
24 TOP MENU B1 4E
32 33 34 35
25 POP-UP MENU CF 30
26 RETURN B7 48
36 37 38 39
27 ON SCREEN A6 59
40 41 42 28 1 94 6B
29 2 95 6A
43 44 45 46 30 3 96 69
31 4 97 68
32 5 98 67
33 6 99 66
34 7 9A 65
35 8 9B 64
36 9 9C 63
37 0 93 6C
38 CLEAR 9F 60
39 SEARCH 9E 61
NETFLIX (BDP120) FA 05
40
ENTER (BDP121) – –
41 HOME EF 10
42 SETUP AC 53
43 STATUS A8 57
44 SUBTITLE AB 54
45 ANGLE AE 51
46 AUDIO AD 52
Extended IR code
ID1
Function
Data code 0 Data code 1
POWER ON F6 09
POWER OFF F7 08
MARKER D8 27
ZOOM D7 28
DIGEST E2 1D
PROGRAM A0 5F
NORMAL C0 3F
RX-V673/HTR-6065/
EXIT F0 0F
BD-S473
INS Search C2 3D
RX-A720
INS Replay C3 3C
45
BD-S473
■ SOFTWARE UPGRADE
BD-S473
46
RX-V673/HTR-6065/
BD-S473
RX-A720
47
BD-S473
MEMO
BD-S473

Yamaha bd-s473

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Yamaha bd-s473

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yamaha bd-s473

Uploaded by

Copyright:

Available Formats

BLU-RAY DISC PLAYER

BD-S473 SERVICE MANUAL

Copyright © 2012 All rights reserved.

■ TO SERVICE PERSONNEL AC LEAKAGE

WARNING: CHEMICAL CONTENT NOTICE!

About lead free solder

WARNING: Laser Safety

Laser Emitting conditions:

Laser Diode Properties

Warning for power supply

■ PREVENTION OF ELECTROSTATIC DISCHARGE

Grounding for electrostatic breakdown prevention

Anti-static wrist strap

■ REGION MANAGEMENT INFORMATION

• BD-video Region Code

• DVD-video Region Number

This product incorporates copyright

Macrovision Corporation and other rights

■ REMOTE CONTROL PANELS

– YouTube and the YouTube logo are trademarks of Google. Inc.

– Audio-visual material may consist of copyrighted works which must not

– DLNA and DLNA CERTIFIED are trademarks and/or service marks of

• SET MENU TABLE

MENU SUB-MENU VALUE

System Software version and MAC address are displayed.

Send this e-mail to Yamaha Corporation

<Confirmation of the Serial Number>

Rear view Serial number

<Confirmation of the New MAC address>

Remote control Initial screen SETUP menu screen

3. Press the “ ”/“ ” key to select the System Information.

SETUP menu screen

Select the System Information

Software Version : 0.185O1000

1. Removal of Top Cover 2. Removal of BD Mechanism Unit

Use a clip or other item to ground

• How to manually eject the disc tray

Allen hex socket screwdriver Slider

2-1. Removal of Loading Belt

3. Removal of Front Panel Unit

Front panel unit

Hook Power supply unit

Hook Hook J305 CON1

■ REWRITING OPU PARAMETER

Items not supplied from Yamaha Corporation

● Preparation and precaution

● Outline of operation procedure

<When replacing MAIN P.C.B.>

● Details of Operation Procedure

Top view of BD mechanism unit

OPU parameter text data

Send this e-mail to Yamaha Corporation

Receive this e-mail from Yamaha Corporation

OPU parameter text data

Writing OPU Parameter and Playback Test

PC This unit (top view)

USB-UART conversion adaptor

3. Connect a TV monitor to this unit as shown below. (Fig. 4)