CPDAS343
CPDAS343
CPDAS343
a
220-240 V ∼ 50 Hz
220-240V 50Hz
00
B
R6
SUCTION
9 052 1234567 0
General
Code number CDO000033
Approvals EN 60335-2-34 w. Annex AA
Compressors on pallet 100 Variant code
Manufacturer/version code
Application serial number | check digit
Frequency Hz 50 60
Evaporating temperature °C -35 to -5 –
Voltage range V 187 to 264 –
Max. condensing temperature continuous (short) °C 60 (70) –
Max. winding temperature continuous (short) °C 130 (130) –
S = Static cooling normally sufficient
Cooling requirements
O = Oil cooling
Frequency Hz 50 60 F1 = Fan cooling 1.5 m/s
Application LBP MBP HBP LBP MBP HBP (compressor compartment temperature
equal to ambient temperature)
32°C S – – – – –
F2 = Fan cooling 3.0 m/s necessary
38°C S – – – – – SG = Suction gas cooling normally sufficent
43°C S – – – – – – = not applicable in this area
Remarks on application:
Motor
Motor type RSIR
LRA (rated after 4 sec. UL984), HST | LST A – 5.6
Cut in Current, HST | LST A – 5.8
Resistance, main | start winding (25°C) Ω 16.3 15.7
Design
Displacement cm3 11.2
Oil quantity (type) cm3 165 (mineral)
Maximum refrigerant charge g 150
Free gas volume in compressor cm3 1600
Weight without electrical equipment kg 8.6
Dimensions
Height mm A 167.0
B 173.5
Suction connector location/I.D. mm | angle C 6.15 | 35°
material | comment Copper | Rubber plug
Process connector location/O.D. mm | angle D 6.00 | 35°
material | comment Copper | Rubber plug
Discharge connector location/I.D. mm | angle E 5.15 | 40°
material | comment Copper | Rubber plug
Oil cooler connector location/I.D. mm | angle F –
material | comment –
Connector tolerance I.D. mm ±0.05
Remarks:
8856
All-in-one equipment, e.g. 4ZN Code number Mounting accessories Code number
Cover / cable clamp + screws / earthing screw 16168000 on request, various options available
Secop accepts no responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary to specifications already agreed. All trademarks in this material are the property of the
respective companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved. www.secop.com