Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
41 views2 pages

7 Steps Fastener Tightening Procedures 7 Steps Fastener Tightening Procedures

Uploaded by

RIVALDI AIRLANGGA

The 7 step fastener tightening procedures instructs technicians to: 1) Ensure the correct fastener is used and is clean and undamaged. 2) Know the specified torque for the fastener. 3) Apply the recommended lubricant. 4) Use a properly calibrated torque wrench. 5) Tighten the fastener in the correct sequence and to the specified torque. 6) Mark the fastener after tightening.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

7 Steps Fastener Tightening Procedures 7 Steps Fastener Tightening Procedures

Uploaded by

RIVALDI AIRLANGGA
41 views2 pages
The 7 step fastener tightening procedures instructs technicians to: 1) Ensure the correct fastener is used and is clean and undamaged. 2) Know the specified torque for the fastener. 3) Apply the recommended lubricant. 4) Use a properly calibrated torque wrench. 5) Tighten the fastener in the correct sequence and to the specified torque. 6) Mark the fastener after tightening.

Original Title

pdf

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The 7 step fastener tightening procedures instructs technicians to: 1) Ensure the correct fastener is used and is clean and undamaged. 2) Know the specified torque for the fastener. 3) Apply the recommended lubricant. 4) Use a properly calibrated torque wrench. 5) Tighten the fastener in the correct sequence and to the specified torque. 6) Mark the fastener after tightening.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
41 views2 pages

7 Steps Fastener Tightening Procedures 7 Steps Fastener Tightening Procedures

Uploaded by

RIVALDI AIRLANGGA
The 7 step fastener tightening procedures instructs technicians to: 1) Ensure the correct fastener is used and is clean and undamaged. 2) Know the specified torque for the fastener. 3) Apply the recommended lubricant. 4) Use a properly calibrated torque wrench. 5) Tighten the fastener in the correct sequence and to the specified torque. 6) Mark the fastener after tightening.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2

PT.

Trakindo Utama - Training Center

7 Steps Fastener Tightening Procedures :

Step 1. Yakinkan fastener


fastener yang
yang dipasang
dipasang benar.
Make sure the fastener would be installed is correct.

Parts Book One Safe Source

Step 2. Yakinkan
Yakinkan fastener
fastener tidak rusak
rusak dan bersih.
bersih.
Make sure the fastener is not damage and clean.

Damage & Dirty bolts Good and Clean bolts

Step 3. Mengetahui
Mengetahui Specifikasi
Specifikasi Torsi.
Know torque specification.

Serv. Manual

Module Dis./Assembly General Torque Spec.

Step 4. Memberikan
Memberikan pelumas
pelumas sesuai ketentuan
ketentuan dalam
dalam proses.
proses.
Put thread lubrication as recommended on process.

-Thread lock
-Anti seize
Compound
-Clean oil
-Thread lubricant
-etc.
Step 5. Meyakinkan
Meyakinkan torque wrench
wrench yang dipakai
dipakai sesuai
sesuai dan calibrated
calibrated
Make sure to use only proper and calibrated torque wrench.

Calibrate the
torque wrench in

Step 6. Mengencangka
Mengencangkan n dengan cara
cara /sequence
/sequence dan torque
torque yang benar
benar
Tighten the fastener sequence and correct torque.

Find procedures on
Serv.Manual

Module Dis./Assembly or Specification

Step 7. Memberi
Memberi tanda dengan
dengan cara yang
yang benar.
benar.
Put mark with marker.

Tightening and marking


sequence :
• tighten…….
• put mark…….
• tighten ……….
• put mark ………
•

INSTRUCTOR

TRAINING CENTRE

You might also like