SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 with ACExC 01.

Dimensions Multi-turn actuators with ACExC actuator controls (also for fieldbus & HART)
Ex plug/socket connector with terminal block (KT/KM)
Standard:
KT-Ex e with push-in connection
HH H2 K BB1 M N

Ø D3 Protection tube for rising valve stem1)

T Th T
BT
Ø D2
G

STOP

E
E
Version for non
Nur öffnen wenn spannungslos
Open only when mains are off 0 Reset C
Seulement ouvrir si hors tension

Ortsbedienung Fernbedienung
Local control Remote control
Commande locale Cde. a distance

rising stem

H3
Space

A6
required for

Ø D1
removal

H4
F

ØD
A5

H1
h
BB
d4 Ø d2

Ø d3
Base of SA without output Ø d1
B1 drive type A

Valve attachments according to EN ISO 5210, DIN 3210, DIN 3338

For dimensions see overleaf C1 C2 C3

Option:

B2
KT-Ex d with push-in connection

A1
Handwheel shaft KM-Ex e with terminals

Ø D4
KM-Ex d with terminals

A4
b

A3
A3
Possible mounting
t

at every 90°

H5
L a
P3 P2 P3 P2

P1 P1

HH
1) On explicit order only
2) Standard, other threads on request P

Dimensions SAEx 07.2 SAEx 07.6 SAEx 10.2 SAEx 14.2 SAEx 14.6 SAEx 16.2
SAREx 07.2 SAREx 07.6 SAREx 10.2 SAREx 14.2 SAREx 14.6 SAREx 16.2
EN ISO 5210 (DIN 3210) F07 F10 (G0) F07 F10 (G0) F10 (G0) F14 (G1/2) F14 (G1/2) F16 (G3)
A1 40 40 50 67 67 80
A3 261 261 261 277 277 282
A4 103 103 103 119 119 123.5
A5 – – – 8 8 15
A6 – – – 16 16 20
B1 245 245 255 293 293 311
B2 62 62 65 90 90 117
C1 268 268 283 389 389 432
C2 186 186 191 242 245 271
C3 63 63 63 94 94 94
ØD 104 104 124 155 155 192
Ø D1 160 160 200 315 400 500
Ø D2 G 1¼" G 1¼" G 2" G 2½" G 2½" G 3"
Ø D3 42 x 3.3 42 x 3.3 60 x 3.7 76 x 3.7 76 x 3.7 89 x 4.1
Ø D4 20 20 20 25 25 25
E 154 154 154 154 154 154
F 115 115 115 115 115 115
G 166 166 166 166 166 166
H1 78 78 80 90 90 110
H2 223 223 223 223 223 223
H3 235 235 235 251 251 255
H4 160 160 170 196 196 235
H5 282 282 282 282 282 282
K 78 78 78 78 78 78
L 20 20 24 38.8 45.8 45.8
M 199 199 199 199 199 199
N 171 171 171 171 171 171
P 170 170 170 170 170 170
P1 2) M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5 M25 x 1.5
P2 2) M32 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5
P3 2) M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5 M20 x 1.5
BB min. 180 180 180 180 180 180
BB1 min. 75 75 75 75 75 75
HH min. 50 50 50 50 50 50
Øa 20 d7 20 d7 20 d7 30 d7 30 d7 30 d7
b 6 6 6 8 8 8
Ø d1 90 125 90 125 125 175 175 210
Ø d2 f12 55 70 (60) 55 70 (60) 70 (60) 100 100 130
Ø d3 70 102 70 102 102 140 140 165
d4 4 x M8 4 x M10 4 x M8 4 x M10 4 x M10 4 x M16 4 x M16 4 x M20
h 3 3 3 4 4 5
t 22.5 22.5 22.5 33 33 33
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

Y007.313/003/en Issue 1.19 Page 1/2

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 with ACExC 01.2

Dimensions Valve attachments according to EN ISO 5210, DIN 3338, DIN 3210

Stem nut SA.../SAR... 07.2/07.6 10.2 14.2/14.6 16.2

EN ISO 5210 DIN 3210 F07 F10 G0 F10 G0 F14 G1/2 F16 G3
Type F max. kN 40 70 70 160 250
Ø d5
Ø d1 90 125 125 175 210
EN ISO 5210 A
Ø d2 55 70 60 70 60 100 130
DIN 3210 A
Ø d3 70 102 102 140 165
d4 M8 M10 M10 M16 M20
L
Ø d5 36 44 62 80
g

Ø d6
h3

Tr 26 Tr 32 6) Tr 40 Tr 55 Tr 75
Ø d6 max. 5)
ACME 1“ ACME 1¼“ 6) ACME 1½“ ACME 2¼“ ACME 3“
h

–h

g 40 50 50 65 80
>

Ø d2
Zxd4
Ø d3 h 3 3 4 5
Ø d1
h3 12 15 15 25 35
Arrangement of L 37.5 47.5 47.5 61.5 76.5
holes d4 Z 4 4 4 4
Weight kg 1.1 2.8 2.8 6.8 11.7
Special bores
Bore with keyway according to DIN 6885-1 Ø d6 H9 max. 22 38 38 57 70
Square SW max. 20 32 32 42 on request
Hexagon SW max. 22 32 32 48 on request

Output drive sleeve 3) SA.../SAR... 07.2/07.6 10.2 14.2/14.6 16.2

EN ISO 5210 DIN 3210 F07 F10 G0 F10 G0 F14 G1/2 F16 G3
Ø d7 H9 28 42 42 60 80
L1

b7 JS9 8 12 12 18 22
h3

Type
t7 31.3 45.3 45.3 64.4 85.4
EN ISO 5210 B1 d = d7 (b7/t7)
–h

16 20 20 30 40
>

Ø d10 H9
DIN 3210 B d = d7 (b7/t7) t/t7/t10
b10 JS9 5 6 6 8 12
EN ISO 5210 B2 1) d10 max. < d < d7 t10 18.3 22.8 22.8 33.3 43.3
EN ISO 5210 B3 d = d10 (b10/t10) Ø d10 max. 25 35 35 45 60
d

DIN 3210 E d = d10 (b10/t10) h3 12 13 15 25 30

b/b7/b10

EN ISO 5210 B4 1) d ≤ d10 max. L1 35 45 45 65 80

For missing dimensions, refer to type A
Special bores
Square SW max. 22 30 30 45 60
Hexagon SW max. 24 32 32 50 on request

Dog coupling 3) SA.../SAR... 07.2/07.6 10.2 14.2/14.6 16.2

Ø d11 EN ISO 5210 DIN 3210 F07 F10 G0 F10 G0 F14 G1/2 F16 G3
b1 H11 14 4) 14 14 20 24
28 4) 28 28 38 47
h3

Type Ø d11 H11

Ø d11 min. – 20 20 30 40
– h11
–h

EN ISO 5210 C = d11

>

Ø d11 max. – 42 2) 6) 42 60 80
>

DIN 3338 C = d11 Ø d12 Ø d12 36.8 51.8 51.8 73.8 98

h3 12 13 15 25 30
h11 7 4) 7 7 8 10
b1

For missing dimensions, refer to type A

Shaft end SA.../SAR... 07.2/07.6 10.2 14.2/14.6 16.2

EN ISO 5210 DIN 3210 F07 F10 G0 F10 G0 F14 G1/2 F16 G3
Ø d8 g6 20 20 30 40
Type
h3

b3 h9 6 6 8 12
EN ISO 5210 D h3 12 13 15 25 30
DIN 3210 D L2 1.5 1.5 2 3
L5

L4

45 45 63 80
L3

L3
L4 50 50 70 90
L5 55 55 76 97
L2

t2
t2 22.5 22.5 33 43
For missing dimensions, Weight kg 0.4 0.7 2 4.3
d8

refer to type A
b3

1) Dimensions b, t depend on Ø d, refer to DIN 6885-1

2) For rising valve stem Ø d11 max.= Ø d5 of type A
3) Weight included in actuator
4) Dimensions neither complying with EN ISO 5210 nor with DIN 3338
5) Nominal diameter for trapezoidal thread Tr according to DIN 103 or ACME according to ANSI/ASME B 1.5
6) For stem protection tube made of PMMA max. Tr 30 or ACME 1⅛“
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.

Y007.313/003/en Issue 1.19 Page 2/2